diff mbox

[dpdk-dev,13/38] bus/dpaa: add BMAN driver core

Message ID 1497591668-3320-14-git-send-email-shreyansh.jain@nxp.com (mailing list archive)
State Superseded, archived
Delegated to: Thomas Monjalon
Headers show

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Shreyansh Jain June 16, 2017, 5:40 a.m. UTC
The Buffer Manager (BMan) is a hardware buffer pool management block that
allows software and accelerators on the datapath to acquire and release
buffers in order to build frames.

This patch adds the core routines.

Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
---
 drivers/bus/dpaa/Makefile                 |   1 +
 drivers/bus/dpaa/base/qbman/bman_driver.c | 311 +++++++++++++++++++++++++
 drivers/bus/dpaa/base/qbman/bman_priv.h   | 125 ++++++++++
 drivers/bus/dpaa/include/fsl_bman.h       | 375 ++++++++++++++++++++++++++++++
 drivers/bus/dpaa/include/fsl_usd.h        |   5 +
 5 files changed, 817 insertions(+)
 create mode 100644 drivers/bus/dpaa/base/qbman/bman_driver.c
 create mode 100644 drivers/bus/dpaa/base/qbman/bman_priv.h
 create mode 100644 drivers/bus/dpaa/include/fsl_bman.h
diff mbox

Patch

diff --git a/drivers/bus/dpaa/Makefile b/drivers/bus/dpaa/Makefile
index ad68828..24dfa13 100644
--- a/drivers/bus/dpaa/Makefile
+++ b/drivers/bus/dpaa/Makefile
@@ -71,6 +71,7 @@  SRCS-$(CONFIG_RTE_LIBRTE_DPAA_BUS) += \
 	base/fman/of.c \
 	base/fman/netcfg_layer.c \
 	base/qbman/process.c \
+	base/qbman/bman_driver.c \
 	base/qbman/qman.c \
 	base/qbman/qman_driver.c \
 	base/qbman/dpaa_alloc.c \
diff --git a/drivers/bus/dpaa/base/qbman/bman_driver.c b/drivers/bus/dpaa/base/qbman/bman_driver.c
new file mode 100644
index 0000000..fb3c50e
--- /dev/null
+++ b/drivers/bus/dpaa/base/qbman/bman_driver.c
@@ -0,0 +1,311 @@ 
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ *   BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright 2017 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *   GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_branch_prediction.h>
+
+#include <fsl_usd.h>
+#include <process.h>
+#include "bman_priv.h"
+#include <sys/ioctl.h>
+
+/*
+ * Global variables of the max portal/pool number this bman version supported
+ */
+u16 bman_ip_rev;
+u16 bman_pool_max;
+void *bman_ccsr_map;
+
+/*****************/
+/* Portal driver */
+/*****************/
+
+static __thread int fd = -1;
+static __thread struct bm_portal_config pcfg;
+static __thread struct dpaa_ioctl_portal_map map = {
+	.type = dpaa_portal_bman
+};
+
+static int fsl_bman_portal_init(uint32_t idx, int is_shared)
+{
+	cpu_set_t cpuset;
+	int loop, ret;
+	struct dpaa_ioctl_irq_map irq_map;
+
+	/* Verify the thread's cpu-affinity */
+	ret = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t),
+				     &cpuset);
+	if (ret) {
+		error(0, ret, "pthread_getaffinity_np()");
+		return ret;
+	}
+	pcfg.cpu = -1;
+	for (loop = 0; loop < CPU_SETSIZE; loop++)
+		if (CPU_ISSET(loop, &cpuset)) {
+			if (pcfg.cpu != -1) {
+				pr_err("Thread is not affine to 1 cpu");
+				return -EINVAL;
+			}
+			pcfg.cpu = loop;
+		}
+	if (pcfg.cpu == -1) {
+		pr_err("Bug in getaffinity handling!");
+		return -EINVAL;
+	}
+	/* Allocate and map a bman portal */
+	map.index = idx;
+	ret = process_portal_map(&map);
+	if (ret) {
+		error(0, ret, "process_portal_map()");
+		return ret;
+	}
+	/* Make the portal's cache-[enabled|inhibited] regions */
+	pcfg.addr_virt[DPAA_PORTAL_CE] = map.addr.cena;
+	pcfg.addr_virt[DPAA_PORTAL_CI] = map.addr.cinh;
+	pcfg.is_shared = is_shared;
+	pcfg.index = map.index;
+	bman_depletion_fill(&pcfg.mask);
+
+	fd = open(BMAN_PORTAL_IRQ_PATH, O_RDONLY);
+	if (fd == -1) {
+		pr_err("BMan irq init failed");
+		process_portal_unmap(&map.addr);
+		return -EBUSY;
+	}
+	/* Use the IRQ FD as a unique IRQ number */
+	pcfg.irq = fd;
+
+	/* Set the IRQ number */
+	irq_map.type = dpaa_portal_bman;
+	irq_map.portal_cinh = map.addr.cinh;
+	process_portal_irq_map(fd, &irq_map);
+	return 0;
+}
+
+static int fsl_bman_portal_finish(void)
+{
+	int ret;
+
+	process_portal_irq_unmap(fd);
+
+	ret = process_portal_unmap(&map.addr);
+	if (ret)
+		error(0, ret, "process_portal_unmap()");
+	return ret;
+}
+
+int bman_thread_init(void)
+{
+	/* Convert from contiguous/virtual cpu numbering to real cpu when
+	 * calling into the code that is dependent on the device naming.
+	 */
+	return fsl_bman_portal_init(QBMAN_ANY_PORTAL_IDX, 0);
+}
+
+int bman_thread_finish(void)
+{
+	return fsl_bman_portal_finish();
+}
+
+void bman_thread_irq(void)
+{
+	qbman_invoke_irq(pcfg.irq);
+	/* Now we need to uninhibit interrupts. This is the only code outside
+	 * the regular portal driver that manipulates any portal register, so
+	 * rather than breaking that encapsulation I am simply hard-coding the
+	 * offset to the inhibit register here.
+	 */
+	out_be32(pcfg.addr_virt[DPAA_PORTAL_CI] + 0xe0c, 0);
+}
+
+int bman_init_ccsr(const struct device_node *node)
+{
+	static int ccsr_map_fd;
+	uint64_t phys_addr;
+	const uint32_t *bman_addr;
+	uint64_t regs_size;
+
+	bman_addr = of_get_address(node, 0, &regs_size, NULL);
+	if (!bman_addr) {
+		pr_err("of_get_address cannot return BMan address");
+		return -EINVAL;
+	}
+	phys_addr = of_translate_address(node, bman_addr);
+	if (!phys_addr) {
+		pr_err("of_translate_address failed");
+		return -EINVAL;
+	}
+
+	ccsr_map_fd = open(BMAN_CCSR_MAP, O_RDWR);
+	if (unlikely(ccsr_map_fd < 0)) {
+		pr_err("Can not open /dev/mem for BMan CCSR map");
+		return ccsr_map_fd;
+	}
+
+	bman_ccsr_map = mmap(NULL, regs_size, PROT_READ |
+			     PROT_WRITE, MAP_SHARED, ccsr_map_fd, phys_addr);
+	if (bman_ccsr_map == MAP_FAILED) {
+		pr_err("Can not map BMan CCSR base Bman: "
+		       "0x%x Phys: 0x%lx size 0x%lx",
+		       *bman_addr, phys_addr, regs_size);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int bman_global_init(void)
+{
+	const struct device_node *dt_node;
+	static int done;
+
+	if (done)
+		return -EBUSY;
+	/* Use the device-tree to determine IP revision until something better
+	 * is devised.
+	 */
+	dt_node = of_find_compatible_node(NULL, NULL, "fsl,bman-portal");
+	if (!dt_node) {
+		pr_err("No bman portals available for any CPU\n");
+		return -ENODEV;
+	}
+	if (of_device_is_compatible(dt_node, "fsl,bman-portal-1.0") ||
+	    of_device_is_compatible(dt_node, "fsl,bman-portal-1.0.0")) {
+		bman_ip_rev = BMAN_REV10;
+		bman_pool_max = 64;
+	} else if (of_device_is_compatible(dt_node, "fsl,bman-portal-2.0") ||
+		of_device_is_compatible(dt_node, "fsl,bman-portal-2.0.8")) {
+		bman_ip_rev = BMAN_REV20;
+		bman_pool_max = 8;
+	} else if (of_device_is_compatible(dt_node, "fsl,bman-portal-2.1.0") ||
+		of_device_is_compatible(dt_node, "fsl,bman-portal-2.1.1") ||
+		of_device_is_compatible(dt_node, "fsl,bman-portal-2.1.2") ||
+		of_device_is_compatible(dt_node, "fsl,bman-portal-2.1.3")) {
+		bman_ip_rev = BMAN_REV21;
+		bman_pool_max = 64;
+	} else {
+		pr_warn("unknown BMan version in portal node,default "
+			"to rev1.0");
+		bman_ip_rev = BMAN_REV10;
+		bman_pool_max = 64;
+	}
+
+	if (!bman_ip_rev) {
+		pr_err("Unknown bman portal version\n");
+		return -ENODEV;
+	}
+	{
+		const struct device_node *dn = of_find_compatible_node(NULL,
+							NULL, "fsl,bman");
+		if (!dn)
+			pr_err("No bman device node available");
+
+		if (bman_init_ccsr(dn))
+			pr_err("BMan CCSR map failed.");
+	}
+
+	done = 1;
+	return 0;
+}
+
+#define BMAN_POOL_CONTENT(n) (0x0600 + ((n) * 0x04))
+u32 bm_pool_free_buffers(u32 bpid)
+{
+	return in_be32(bman_ccsr_map + BMAN_POOL_CONTENT(bpid));
+}
+
+static u32 __generate_thresh(u32 val, int roundup)
+{
+	u32 e = 0;      /* co-efficient, exponent */
+	int oddbit = 0;
+
+	while (val > 0xff) {
+		oddbit = val & 1;
+		val >>= 1;
+		e++;
+		if (roundup && oddbit)
+			val++;
+	}
+	DPAA_ASSERT(e < 0x10);
+	return (val | (e << 8));
+}
+
+#define POOL_SWDET(n)       (0x0000 + ((n) * 0x04))
+#define POOL_HWDET(n)       (0x0100 + ((n) * 0x04))
+#define POOL_SWDXT(n)       (0x0200 + ((n) * 0x04))
+#define POOL_HWDXT(n)       (0x0300 + ((n) * 0x04))
+int bm_pool_set(u32 bpid, const u32 *thresholds)
+{
+	if (!bman_ccsr_map)
+		return -ENODEV;
+	if (bpid >= bman_pool_max)
+		return -EINVAL;
+	out_be32(bman_ccsr_map + POOL_SWDET(bpid),
+		 __generate_thresh(thresholds[0], 0));
+	out_be32(bman_ccsr_map + POOL_SWDXT(bpid),
+		 __generate_thresh(thresholds[1], 1));
+	out_be32(bman_ccsr_map + POOL_HWDET(bpid),
+		 __generate_thresh(thresholds[2], 0));
+	out_be32(bman_ccsr_map + POOL_HWDXT(bpid),
+		 __generate_thresh(thresholds[3], 1));
+	return 0;
+}
+
+#define BMAN_LOW_DEFAULT_THRESH		0x40
+#define BMAN_HIGH_DEFAULT_THRESH		0x80
+int bm_pool_set_hw_threshold(u32 bpid, const u32 low_thresh,
+			     const u32 high_thresh)
+{
+	if (!bman_ccsr_map)
+		return -ENODEV;
+	if (bpid >= bman_pool_max)
+		return -EINVAL;
+	if (low_thresh && high_thresh) {
+		out_be32(bman_ccsr_map + POOL_HWDET(bpid),
+			 __generate_thresh(low_thresh, 0));
+		out_be32(bman_ccsr_map + POOL_HWDXT(bpid),
+			 __generate_thresh(high_thresh, 1));
+	} else {
+		out_be32(bman_ccsr_map + POOL_HWDET(bpid),
+			 __generate_thresh(BMAN_LOW_DEFAULT_THRESH, 0));
+		out_be32(bman_ccsr_map + POOL_HWDXT(bpid),
+			 __generate_thresh(BMAN_HIGH_DEFAULT_THRESH, 1));
+	}
+	return 0;
+}
diff --git a/drivers/bus/dpaa/base/qbman/bman_priv.h b/drivers/bus/dpaa/base/qbman/bman_priv.h
new file mode 100644
index 0000000..07d9cec
--- /dev/null
+++ b/drivers/bus/dpaa/base/qbman/bman_priv.h
@@ -0,0 +1,125 @@ 
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ *   BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright 2017 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *   GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __BMAN_PRIV_H
+#define __BMAN_PRIV_H
+
+#include "dpaa_sys.h"
+#include <fsl_bman.h>
+
+/* Revision info (for errata and feature handling) */
+#define BMAN_REV10 0x0100
+#define BMAN_REV20 0x0200
+#define BMAN_REV21 0x0201
+
+#define BMAN_PORTAL_IRQ_PATH "/dev/fsl-usdpaa-irq"
+#define BMAN_CCSR_MAP "/dev/mem"
+
+/* This mask contains all the "irqsource" bits visible to API users */
+#define BM_PIRQ_VISIBLE	(BM_PIRQ_RCRI | BM_PIRQ_BSCN)
+
+/* These are bm_<reg>_<verb>(). So for example, bm_disable_write() means "write
+ * the disable register" rather than "disable the ability to write".
+ */
+#define bm_isr_status_read(bm)		__bm_isr_read(bm, bm_isr_status)
+#define bm_isr_status_clear(bm, m)	__bm_isr_write(bm, bm_isr_status, m)
+#define bm_isr_enable_read(bm)		__bm_isr_read(bm, bm_isr_enable)
+#define bm_isr_enable_write(bm, v)	__bm_isr_write(bm, bm_isr_enable, v)
+#define bm_isr_disable_read(bm)		__bm_isr_read(bm, bm_isr_disable)
+#define bm_isr_disable_write(bm, v)	__bm_isr_write(bm, bm_isr_disable, v)
+#define bm_isr_inhibit(bm)		__bm_isr_write(bm, bm_isr_inhibit, 1)
+#define bm_isr_uninhibit(bm)		__bm_isr_write(bm, bm_isr_inhibit, 0)
+
+/*
+ * Global variables of the max portal/pool number this bman version supported
+ */
+extern u16 bman_pool_max;
+
+/* used by CCSR and portal interrupt code */
+enum bm_isr_reg {
+	bm_isr_status = 0,
+	bm_isr_enable = 1,
+	bm_isr_disable = 2,
+	bm_isr_inhibit = 3
+};
+
+struct bm_portal_config {
+	/*
+	 * Corenet portal addresses;
+	 * [0]==cache-enabled, [1]==cache-inhibited.
+	 */
+	void __iomem *addr_virt[2];
+	/* Allow these to be joined in lists */
+	struct list_head list;
+	/* User-visible portal configuration settings */
+	/* This is used for any "core-affine" portals, ie. default portals
+	 * associated to the corresponding cpu. -1 implies that there is no
+	 * core affinity configured.
+	 */
+	int cpu;
+	/* portal interrupt line */
+	int irq;
+	/* the unique index of this portal */
+	u32 index;
+	/* Is this portal shared? (If so, it has coarser locking and demuxes
+	 * processing on behalf of other CPUs.).
+	 */
+	int is_shared;
+	/* These are the buffer pool IDs that may be used via this portal. */
+	struct bman_depletion mask;
+
+};
+
+int bman_init_ccsr(const struct device_node *node);
+
+struct bman_portal *bman_create_affine_portal(
+			const struct bm_portal_config *config);
+const struct bm_portal_config *bman_destroy_affine_portal(void);
+
+/* Set depletion thresholds associated with a buffer pool. Requires that the
+ * operating system have access to Bman CCSR (ie. compiled in support and
+ * run-time access courtesy of the device-tree).
+ */
+int bm_pool_set(u32 bpid, const u32 *thresholds);
+
+/* Read the free buffer count for a given buffer */
+u32 bm_pool_free_buffers(u32 bpid);
+
+#endif /* __BMAN_PRIV_H */
diff --git a/drivers/bus/dpaa/include/fsl_bman.h b/drivers/bus/dpaa/include/fsl_bman.h
new file mode 100644
index 0000000..383106b
--- /dev/null
+++ b/drivers/bus/dpaa/include/fsl_bman.h
@@ -0,0 +1,375 @@ 
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ *   BSD LICENSE
+ *
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *   GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_BMAN_H
+#define __FSL_BMAN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* This wrapper represents a bit-array for the depletion state of the 64 Bman
+ * buffer pools.
+ */
+struct bman_depletion {
+	u32 state[2];
+};
+
+static inline void bman_depletion_init(struct bman_depletion *c)
+{
+	c->state[0] = c->state[1] = 0;
+}
+
+static inline void bman_depletion_fill(struct bman_depletion *c)
+{
+	c->state[0] = c->state[1] = ~0;
+}
+
+/* --- Bman data structures (and associated constants) --- */
+
+/* Represents s/w corenet portal mapped data structures */
+struct bm_rcr_entry;	/* RCR (Release Command Ring) entries */
+struct bm_mc_command;	/* MC (Management Command) command */
+struct bm_mc_result;	/* MC result */
+
+/* Code-reduction, define a wrapper for 48-bit buffers. In cases where a buffer
+ * pool id specific to this buffer is needed (BM_RCR_VERB_CMD_BPID_MULTI,
+ * BM_MCC_VERB_ACQUIRE), the 'bpid' field is used.
+ */
+struct bm_buffer {
+	union {
+		struct {
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+			u8 __reserved1;
+			u8 bpid;
+			u16 hi; /* High 16-bits of 48-bit address */
+			u32 lo; /* Low 32-bits of 48-bit address */
+#else
+			u32 lo;
+			u16 hi;
+			u8 bpid;
+			u8 __reserved;
+#endif
+		};
+		struct {
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+			u64 __notaddress:16;
+			u64 addr:48;
+#else
+			u64 addr:48;
+			u64 __notaddress:16;
+#endif
+		};
+		u64 opaque;
+	};
+} __attribute__((aligned(8)));
+static inline u64 bm_buffer_get64(const struct bm_buffer *buf)
+{
+	return buf->addr;
+}
+
+static inline dma_addr_t bm_buf_addr(const struct bm_buffer *buf)
+{
+	return (dma_addr_t)buf->addr;
+}
+
+#define bm_buffer_set64(buf, v) \
+	do { \
+		struct bm_buffer *__buf931 = (buf); \
+		__buf931->hi = upper_32_bits(v); \
+		__buf931->lo = lower_32_bits(v); \
+	} while (0)
+
+/* See 1.5.3.5.4: "Release Command" */
+struct bm_rcr_entry {
+	union {
+		struct {
+			u8 __dont_write_directly__verb;
+			u8 bpid; /* used with BM_RCR_VERB_CMD_BPID_SINGLE */
+			u8 __reserved1[62];
+		};
+		struct bm_buffer bufs[8];
+	};
+} __packed;
+#define BM_RCR_VERB_VBIT		0x80
+#define BM_RCR_VERB_CMD_MASK		0x70	/* one of two values; */
+#define BM_RCR_VERB_CMD_BPID_SINGLE	0x20
+#define BM_RCR_VERB_CMD_BPID_MULTI	0x30
+#define BM_RCR_VERB_BUFCOUNT_MASK	0x0f	/* values 1..8 */
+
+/* See 1.5.3.1: "Acquire Command" */
+/* See 1.5.3.2: "Query Command" */
+struct bm_mcc_acquire {
+	u8 bpid;
+	u8 __reserved1[62];
+} __packed;
+struct bm_mcc_query {
+	u8 __reserved2[63];
+} __packed;
+struct bm_mc_command {
+	u8 __dont_write_directly__verb;
+	union {
+		struct bm_mcc_acquire acquire;
+		struct bm_mcc_query query;
+	};
+} __packed;
+#define BM_MCC_VERB_VBIT		0x80
+#define BM_MCC_VERB_CMD_MASK		0x70	/* where the verb contains; */
+#define BM_MCC_VERB_CMD_ACQUIRE		0x10
+#define BM_MCC_VERB_CMD_QUERY		0x40
+#define BM_MCC_VERB_ACQUIRE_BUFCOUNT	0x0f	/* values 1..8 go here */
+
+/* See 1.5.3.3: "Acquire Response" */
+/* See 1.5.3.4: "Query Response" */
+struct bm_pool_state {
+	u8 __reserved1[32];
+	/* "availability state" and "depletion state" */
+	struct {
+		u8 __reserved1[8];
+		/* Access using bman_depletion_***() */
+		struct bman_depletion state;
+	} as, ds;
+};
+
+struct bm_mc_result {
+	union {
+		struct {
+			u8 verb;
+			u8 __reserved1[63];
+		};
+		union {
+			struct {
+				u8 __reserved1;
+				u8 bpid;
+				u8 __reserved2[62];
+			};
+			struct bm_buffer bufs[8];
+		} acquire;
+		struct bm_pool_state query;
+	};
+} __packed;
+#define BM_MCR_VERB_VBIT		0x80
+#define BM_MCR_VERB_CMD_MASK		BM_MCC_VERB_CMD_MASK
+#define BM_MCR_VERB_CMD_ACQUIRE		BM_MCC_VERB_CMD_ACQUIRE
+#define BM_MCR_VERB_CMD_QUERY		BM_MCC_VERB_CMD_QUERY
+#define BM_MCR_VERB_CMD_ERR_INVALID	0x60
+#define BM_MCR_VERB_CMD_ERR_ECC		0x70
+#define BM_MCR_VERB_ACQUIRE_BUFCOUNT	BM_MCC_VERB_ACQUIRE_BUFCOUNT /* 0..8 */
+
+/* Portal and Buffer Pools */
+/* Represents a managed portal */
+struct bman_portal;
+
+/* This object type represents Bman buffer pools. */
+struct bman_pool;
+
+/* This struct specifies parameters for a bman_pool object. */
+struct bman_pool_params {
+	/* index of the buffer pool to encapsulate (0-63), ignored if
+	 * BMAN_POOL_FLAG_DYNAMIC_BPID is set.
+	 */
+	u32 bpid;
+	/* bit-mask of BMAN_POOL_FLAG_*** options */
+	u32 flags;
+	/* depletion-entry/exit thresholds, if BMAN_POOL_FLAG_THRESH is set. NB:
+	 * this is only allowed if BMAN_POOL_FLAG_DYNAMIC_BPID is used *and*
+	 * when run in the control plane (which controls Bman CCSR). This array
+	 * matches the definition of bm_pool_set().
+	 */
+	u32 thresholds[4];
+};
+
+/* Flags to bman_new_pool() */
+#define BMAN_POOL_FLAG_NO_RELEASE    0x00000001 /* can't release to pool */
+#define BMAN_POOL_FLAG_ONLY_RELEASE  0x00000002 /* can only release to pool */
+#define BMAN_POOL_FLAG_DYNAMIC_BPID  0x00000008 /* (de)allocate bpid */
+#define BMAN_POOL_FLAG_THRESH        0x00000010 /* set depletion thresholds */
+
+/* Flags to bman_release() */
+#define BMAN_RELEASE_FLAG_NOW        0x00000008 /* issue immediate release */
+
+
+/**
+ * bman_get_portal_index - get portal configuration index
+ */
+int bman_get_portal_index(void);
+
+/**
+ * bman_rcr_is_empty - Determine if portal's RCR is empty
+ *
+ * For use in situations where a cpu-affine caller needs to determine when all
+ * releases for the local portal have been processed by Bman but can't use the
+ * BMAN_RELEASE_FLAG_WAIT_SYNC flag to do this from the final bman_release().
+ * The function forces tracking of RCR consumption (which normally doesn't
+ * happen until release processing needs to find space to put new release
+ * commands), and returns zero if the ring still has unprocessed entries,
+ * non-zero if it is empty.
+ */
+int bman_rcr_is_empty(void);
+
+/**
+ * bman_alloc_bpid_range - Allocate a contiguous range of BPIDs
+ * @result: is set by the API to the base BPID of the allocated range
+ * @count: the number of BPIDs required
+ * @align: required alignment of the allocated range
+ * @partial: non-zero if the API can return fewer than @count BPIDs
+ *
+ * Returns the number of buffer pools allocated, or a negative error code. If
+ * @partial is non zero, the allocation request may return a smaller range of
+ * BPs than requested (though alignment will be as requested). If @partial is
+ * zero, the return value will either be 'count' or negative.
+ */
+int bman_alloc_bpid_range(u32 *result, u32 count, u32 align, int partial);
+static inline int bman_alloc_bpid(u32 *result)
+{
+	int ret = bman_alloc_bpid_range(result, 1, 0, 0);
+
+	return (ret > 0) ? 0 : ret;
+}
+
+/**
+ * bman_release_bpid_range - Release the specified range of buffer pool IDs
+ * @bpid: the base BPID of the range to deallocate
+ * @count: the number of BPIDs in the range
+ *
+ * This function can also be used to seed the allocator with ranges of BPIDs
+ * that it can subsequently allocate from.
+ */
+void bman_release_bpid_range(u32 bpid, unsigned int count);
+static inline void bman_release_bpid(u32 bpid)
+{
+	bman_release_bpid_range(bpid, 1);
+}
+
+int bman_reserve_bpid_range(u32 bpid, unsigned int count);
+static inline int bman_reserve_bpid(u32 bpid)
+{
+	return bman_reserve_bpid_range(bpid, 1);
+}
+
+void bman_seed_bpid_range(u32 bpid, unsigned int count);
+
+int bman_shutdown_pool(u32 bpid);
+
+/**
+ * bman_new_pool - Allocates a Buffer Pool object
+ * @params: parameters specifying the buffer pool ID and behaviour
+ *
+ * Creates a pool object for the given @params. A portal and the depletion
+ * callback field of @params are only used if the BMAN_POOL_FLAG_DEPLETION flag
+ * is set. NB, the fields from @params are copied into the new pool object, so
+ * the structure provided by the caller can be released or reused after the
+ * function returns.
+ */
+struct bman_pool *bman_new_pool(const struct bman_pool_params *params);
+
+/**
+ * bman_free_pool - Deallocates a Buffer Pool object
+ * @pool: the pool object to release
+ */
+void bman_free_pool(struct bman_pool *pool);
+
+/**
+ * bman_get_params - Returns a pool object's parameters.
+ * @pool: the pool object
+ *
+ * The returned pointer refers to state within the pool object so must not be
+ * modified and can no longer be read once the pool object is destroyed.
+ */
+const struct bman_pool_params *bman_get_params(const struct bman_pool *pool);
+
+/**
+ * bman_release - Release buffer(s) to the buffer pool
+ * @pool: the buffer pool object to release to
+ * @bufs: an array of buffers to release
+ * @num: the number of buffers in @bufs (1-8)
+ * @flags: bit-mask of BMAN_RELEASE_FLAG_*** options
+ *
+ */
+int bman_release(struct bman_pool *pool, const struct bm_buffer *bufs, u8 num,
+		 u32 flags);
+
+/**
+ * bman_acquire - Acquire buffer(s) from a buffer pool
+ * @pool: the buffer pool object to acquire from
+ * @bufs: array for storing the acquired buffers
+ * @num: the number of buffers desired (@bufs is at least this big)
+ *
+ * Issues an "Acquire" command via the portal's management command interface.
+ * The return value will be the number of buffers obtained from the pool, or a
+ * negative error code if a h/w error or pool starvation was encountered.
+ */
+int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num,
+		 u32 flags);
+
+/**
+ * bman_query_pools - Query all buffer pool states
+ * @state: storage for the queried availability and depletion states
+ */
+int bman_query_pools(struct bm_pool_state *state);
+
+/**
+ * bman_query_free_buffers - Query how many free buffers are in buffer pool
+ * @pool: the buffer pool object to query
+ *
+ * Return the number of the free buffers
+ */
+u32 bman_query_free_buffers(struct bman_pool *pool);
+
+/**
+ * bman_update_pool_thresholds - Change the buffer pool's depletion thresholds
+ * @pool: the buffer pool object to which the thresholds will be set
+ * @thresholds: the new thresholds
+ */
+int bman_update_pool_thresholds(struct bman_pool *pool, const u32 *thresholds);
+
+/**
+ * bm_pool_set_hw_threshold - Change the buffer pool's thresholds
+ * @pool: Pool id
+ * @low_thresh: low threshold
+ * @high_thresh: high threshold
+ */
+int bm_pool_set_hw_threshold(u32 bpid, const u32 low_thresh,
+			     const u32 high_thresh);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __FSL_BMAN_H */
diff --git a/drivers/bus/dpaa/include/fsl_usd.h b/drivers/bus/dpaa/include/fsl_usd.h
index a4897b0..a3243af 100644
--- a/drivers/bus/dpaa/include/fsl_usd.h
+++ b/drivers/bus/dpaa/include/fsl_usd.h
@@ -50,7 +50,9 @@  extern "C" {
 
 /* Thread-entry/exit hooks; */
 int qman_thread_init(void);
+int bman_thread_init(void);
 int qman_thread_finish(void);
+int bman_thread_finish(void);
 
 #define QBMAN_ANY_PORTAL_IDX 0xffffffff
 
@@ -92,9 +94,12 @@  int bman_free_raw_portal(struct dpaa_raw_portal *portal);
  * into another blocking read/select/poll.
  */
 void qman_thread_irq(void);
+void bman_thread_irq(void);
 
 /* Global setup */
 int qman_global_init(void);
+int bman_global_init(void);
+
 #ifdef __cplusplus
 }
 #endif