diff mbox

[dpdk-dev] doc: revise sample testpmd flow commands

Message ID 1492525246-2776-1-git-send-email-bernard.iremonger@intel.com (mailing list archive)
State Accepted, archived
Delegated to: Thomas Monjalon
Headers show

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation fail Compilation issues

Commit Message

Iremonger, Bernard April 18, 2017, 2:20 p.m. UTC
Stop port before enabling QinQ.
Add commands to set inner and outer TPID's and start port.
Remove TPID's from flow validate and and flow create commands.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33 ++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 12 deletions(-)

Comments

Mcnamara, John April 26, 2017, 3:04 p.m. UTC | #1
> -----Original Message-----
> From: Iremonger, Bernard
> Sent: Tuesday, April 18, 2017 3:21 PM
> To: dev@dpdk.org
> Cc: Mcnamara, John <john.mcnamara@intel.com>; Lu, Wenzhuo
> <wenzhuo.lu@intel.com>; Xing, Beilei <beilei.xing@intel.com>; Pei, Yulong
> <yulong.pei@intel.com>; Iremonger, Bernard <bernard.iremonger@intel.com>
> Subject: [PATCH] doc: revise sample testpmd flow commands
> 
> Stop port before enabling QinQ.
> Add commands to set inner and outer TPID's and start port.
> Remove TPID's from flow validate and and flow create commands.
> 
> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>

Acked-by: John McNamara <john.mcnamara@intel.com>
Thomas Monjalon May 1, 2017, 8:39 p.m. UTC | #2
> > Stop port before enabling QinQ.
> > Add commands to set inner and outer TPID's and start port.
> > Remove TPID's from flow validate and and flow create commands.
> > 
> > Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
> 
> Acked-by: John McNamara <john.mcnamara@intel.com>

Applied, thanks
diff mbox

Patch

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index ddd1d9257..bc949b755 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -2834,16 +2834,29 @@  Output can be limited to specific groups::
 Sample QinQ flow rules
 ~~~~~~~~~~~~~~~~~~~~~~
 
+Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
+
+   testpmd> port stop 0
+   testpmd> vlan set qinq on 0
+
+The above command sets the inner and outer TPID's to 0x8100.
+
+To change the TPID's the following commands should be used::
+
+   testpmd> vlan set outer tpid 0xa100 0
+   testpmd> vlan set inner tpid 0x9100 0
+   testpmd> port start 0
+
 Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
 
 ::
 
-   testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
-       vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+   testpmd> flow validate 0 ingress pattern eth / vlan tci is 123 /
+       vlan tci is 456 / end actions vf id 1 / queue index 0 / end
    Flow rule #0 validated
 
-   testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
-       vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+   testpmd> flow create 0 ingress pattern eth / vlan tci is 4 /
+       vlan tci is 456 / end actions vf id 123 / queue index 0 / end
    Flow rule #0 created
 
    testpmd> flow list 0
@@ -2854,12 +2867,12 @@  Validate and create a QinQ rule on port 0 to steer traffic to a queue on the hos
 
 ::
 
-   testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
-        vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 0 / end
+   testpmd> flow validate 0 ingress pattern eth / vlan tci is 321 /
+        vlan tci is 654 / end actions pf / queue index 0 / end
    Flow rule #1 validated
 
-   testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
-        vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 1 / end
+   testpmd> flow create 0 ingress pattern eth / vlan tci is 321 /
+        vlan tci is 654 / end actions pf / queue index 1 / end
    Flow rule #1 created
 
    testpmd> flow list 0
@@ -2867,7 +2880,3 @@  Validate and create a QinQ rule on port 0 to steer traffic to a queue on the hos
    0       0       0       i-      ETH VLAN VLAN=>VF QUEUE
    1       0       0       i-      ETH VLAN VLAN=>PF QUEUE
 
-After creating QinQ rule(s) the following command should be issued to enable QinQ::
-
-   testpmd> vlan set qinq on 0
-