[dpdk-dev,v7,1/7] net/ark: stub PMD for Atomic Rules Arkville

Message ID 1490823145-13012-1-git-send-email-ed.czeck@atomicrules.com (mailing list archive)
State Superseded, archived
Delegated to: Ferruh Yigit
Headers

Checks

Context Check Description
ci/checkpatch warning coding style issues
ci/Intel-compilation success Compilation OK

Commit Message

Ed Czeck March 29, 2017, 9:32 p.m. UTC
  Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time

v6:
* Address review comments
* Unify messaging, logging and debug macros to ark_logs.h

v5:
* Address comments from Ferruh Yigit <ferruh.yigit@intel.com>
* Added documentation on driver args
* Makefile fixes
* Safe argument processing
* vdev args to dev args

v4:
* Address issues report from review
* Add internal comments on driver arg
* provide a bare-bones dev init to avoid compiler warnings

v3:
* Split large patch into several smaller ones

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
---
 MAINTAINERS                              |   8 +
 config/common_base                       |  10 ++
 config/defconfig_arm-armv7a-linuxapp-gcc |   1 +
 doc/guides/nics/ark.rst                  | 296 +++++++++++++++++++++++++++++++
 doc/guides/nics/index.rst                |   1 +
 drivers/net/Makefile                     |   2 +
 drivers/net/ark/Makefile                 |  56 ++++++
 drivers/net/ark/ark_ethdev.c             | 288 ++++++++++++++++++++++++++++++
 drivers/net/ark/ark_ethdev.h             |  41 +++++
 drivers/net/ark/ark_global.h             | 116 ++++++++++++
 drivers/net/ark/ark_logs.h               | 119 +++++++++++++
 drivers/net/ark/rte_pmd_ark_version.map  |   4 +
 mk/rte.app.mk                            |   1 +
 13 files changed, 943 insertions(+)
 create mode 100644 doc/guides/nics/ark.rst
 create mode 100644 drivers/net/ark/Makefile
 create mode 100644 drivers/net/ark/ark_ethdev.c
 create mode 100644 drivers/net/ark/ark_ethdev.h
 create mode 100644 drivers/net/ark/ark_global.h
 create mode 100644 drivers/net/ark/ark_logs.h
 create mode 100644 drivers/net/ark/rte_pmd_ark_version.map
  

Comments

Ferruh Yigit March 31, 2017, 2:51 p.m. UTC | #1
On 3/29/2017 10:32 PM, Ed Czeck wrote:
> Enable Arkville on supported configurations
> Add overview documentation
> Minimum driver support for valid compile
> Arkville PMD is not supported on ARM or PowerPC at this time
> 
> v6:
> * Address review comments
> * Unify messaging, logging and debug macros to ark_logs.h
> 
> v5:
> * Address comments from Ferruh Yigit <ferruh.yigit@intel.com>
> * Added documentation on driver args
> * Makefile fixes
> * Safe argument processing
> * vdev args to dev args
> 
> v4:
> * Address issues report from review
> * Add internal comments on driver arg
> * provide a bare-bones dev init to avoid compiler warnings
> 
> v3:
> * Split large patch into several smaller ones
> 
> Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
> Signed-off-by: John Miller <john.miller@atomicrules.com>

Hi Ed,

Can you please update release notes [1] to announce the ARK PMD?


Apart from that, overall PMD looks good to me.

Still I suggest pushing the PMD integration to RC2 phase, to give more
chance for reviews.

If PMD gets acked before that time, we can integrate earlier. If there
is no objection till RC2, it gets merged in RC2.

This means less time for testing after integration, is merging on RC2
will leave you enough time for testing?

Thanks,
ferruh


[1]
doc/guides/rel_notes/release_17_05.rst
  
Shepard Siegel March 31, 2017, 3:09 p.m. UTC | #2
Hi Ferruh,

Thank you for the terrific news.

Ed is traveling today; we agree with you that pushing to RC2 will allow
more chance for reviews with little or no other impact. We will update the
release notes [1] to announce ARK PMD on Tuesday by 5PM EDT.

As an aside, I want to mention that Atomic Rules has joined LF/DPDK as a
Silver Member. I've been in contact with Tim and Thomas on this. Atomic
Rules will included in some of the press around next week's ONS event. We
are honored to be part of this group!

-Shep for the Atomic Rules team

Shepard Siegel, CTO
atomicrules.com


On Fri, Mar 31, 2017 at 10:51 AM, Ferruh Yigit <ferruh.yigit@intel.com>
wrote:

> On 3/29/2017 10:32 PM, Ed Czeck wrote:
> > Enable Arkville on supported configurations
> > Add overview documentation
> > Minimum driver support for valid compile
> > Arkville PMD is not supported on ARM or PowerPC at this time
> >
> > v6:
> > * Address review comments
> > * Unify messaging, logging and debug macros to ark_logs.h
> >
> > v5:
> > * Address comments from Ferruh Yigit <ferruh.yigit@intel.com>
> > * Added documentation on driver args
> > * Makefile fixes
> > * Safe argument processing
> > * vdev args to dev args
> >
> > v4:
> > * Address issues report from review
> > * Add internal comments on driver arg
> > * provide a bare-bones dev init to avoid compiler warnings
> >
> > v3:
> > * Split large patch into several smaller ones
> >
> > Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
> > Signed-off-by: John Miller <john.miller@atomicrules.com>
>
> Hi Ed,
>
> Can you please update release notes [1] to announce the ARK PMD?
>
>
> Apart from that, overall PMD looks good to me.
>
> Still I suggest pushing the PMD integration to RC2 phase, to give more
> chance for reviews.
>
> If PMD gets acked before that time, we can integrate earlier. If there
> is no objection till RC2, it gets merged in RC2.
>
> This means less time for testing after integration, is merging on RC2
> will leave you enough time for testing?
>
> Thanks,
> ferruh
>
>
> [1]
> doc/guides/rel_notes/release_17_05.rst
>
>
>
  
Ed Czeck April 4, 2017, 8:58 p.m. UTC | #3
Hi Ferruh,

The patch series was updated to apply on the latest dpdk-next-net (d7f06ea2)

On Fri, Mar 31, 2017 at 10:51 AM, Ferruh Yigit <ferruh.yigit@intel.com>
wrote:
>
> On 3/29/2017 10:32 PM, Ed Czeck wrote:
> > Enable Arkville on supported configurations
>
>
> Can you please update release notes [1] to announce the ARK PMD?

Release note have been updated in patch 7/7.


> Apart from that, overall PMD looks good to me.
>
> Still I suggest pushing the PMD integration to RC2 phase, to give more
> chance for reviews.

We at Atomic Rules are fine with moving this in RC2.  When do you expect
that to occur?

> If PMD gets acked before that time, we can integrate earlier. If there
> is no objection till RC2, it gets merged in RC2.
>
> This means less time for testing after integration, is merging on RC2
> will leave you enough time for testing?

We have been continually testing with the latest code from dpdk-next-net.
Aside from occasional merge issues, the core dpdk code which we depend upon
remains stable.

> Thanks,
> ferruh
>
>
> [1]
> doc/guides/rel_notes/release_17_05.rst
>
>
  

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 96d2cd0..0ccc4cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -278,6 +278,14 @@  M: Evgeny Schemeilin <evgenys@amazon.com>
 F: drivers/net/ena/
 F: doc/guides/nics/ena.rst
 
+Atomic Rules ARK
+M: Shepard Siegel <shepard.siegel@atomicrules.com>
+M: Ed Czeck       <ed.czeck@atomicrules.com>
+M: John Miller    <john.miller@atomicrules.com>
+F: drivers/net/ark/
+F: doc/guides/nics/ark.rst
+F: doc/guides/nics/features/ark.ini
+
 Broadcom bnxt
 M: Stephen Hurd <stephen.hurd@broadcom.com>
 M: Ajit Khaparde <ajit.khaparde@broadcom.com>
diff --git a/config/common_base b/config/common_base
index 8000665..7dbc0a8 100644
--- a/config/common_base
+++ b/config/common_base
@@ -385,6 +385,16 @@  CONFIG_RTE_LIBRTE_QEDE_FW=""
 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
 
 #
+# Compile ARK PMD
+#
+CONFIG_RTE_LIBRTE_ARK_PMD=y
+CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
+CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
+CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
+
+#
 # Compile WRS accelerated virtual port (AVP) guest PMD driver
 #
 CONFIG_RTE_LIBRTE_AVP_PMD=n
diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
index d9bd2a8..6d2b5e0 100644
--- a/config/defconfig_arm-armv7a-linuxapp-gcc
+++ b/config/defconfig_arm-armv7a-linuxapp-gcc
@@ -61,6 +61,7 @@  CONFIG_RTE_SCHED_VECTOR=n
 
 # cannot use those on ARM
 CONFIG_RTE_KNI_KMOD=n
+CONFIG_RTE_LIBRTE_ARK_PMD=n
 CONFIG_RTE_LIBRTE_EM_PMD=n
 CONFIG_RTE_LIBRTE_IGB_PMD=n
 CONFIG_RTE_LIBRTE_CXGBE_PMD=n
diff --git a/doc/guides/nics/ark.rst b/doc/guides/nics/ark.rst
new file mode 100644
index 0000000..064ed11
--- /dev/null
+++ b/doc/guides/nics/ark.rst
@@ -0,0 +1,296 @@ 
+.. BSD LICENSE
+
+    Copyright (c) 2015-2017 Atomic Rules LLC
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Atomic Rules LLC nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ARK Poll Mode Driver
+====================
+
+The ARK PMD is a DPDK poll-mode driver for the Atomic Rules Arkville
+(ARK) family of devices.
+
+More information can be found at the `Atomic Rules website
+<http://atomicrules.com>`_.
+
+Overview
+--------
+
+The Atomic Rules Arkville product is DPDK and AXI compliant product
+that marshals packets across a PCIe conduit between host DPDK mbufs and
+FPGA AXI streams.
+
+The ARK PMD, and the spirit of the overall Arkville product,
+has been to take the DPDK API/ABI as a fixed specification;
+then implement much of the business logic in FPGA RTL circuits.
+The approach of *working backwards* from the DPDK API/ABI and having
+the GPP host software *dictate*, while the FPGA hardware *copes*,
+results in significant performance gains over a naive implementation.
+
+While this document describes the ARK PMD software, it is helpful to
+understand what the FPGA hardware is and is not. The Arkville RTL
+component provides a single PCIe Physical Function (PF) supporting
+some number of RX/Ingress and TX/Egress Queues. The ARK PMD controls
+the Arkville core through a dedicated opaque Core BAR (CBAR).
+To allow users full freedom for their own FPGA application IP,
+an independent FPGA Application BAR (ABAR) is provided.
+
+One popular way to imagine Arkville's FPGA hardware aspect is as the
+FPGA PCIe-facing side of a so-called Smart NIC. The Arkville core does
+not contain any MACs, and is link-speed independent, as well as
+agnostic to the number of physical ports the application chooses to
+use. The ARK driver exposes the familiar PMD interface to allow packet
+movement to and from mbufs across multiple queues.
+
+However FPGA RTL applications could contain a universe of added
+functionality that an Arkville RTL core does not provide or can
+not anticipate. To allow for this expectation of user-defined
+innovation, the ARK PMD provides a dynamic mechanism of adding
+capabilities without having to modify the ARK PMD.
+
+The ARK PMD is intended to support all instances of the Arkville
+RTL Core, regardless of configuration, FPGA vendor, or target
+board. While specific capabilities such as number of physical
+hardware queue-pairs are negotiated; the driver is designed to
+remain constant over a broad and extendable feature set.
+
+Intentionally, Arkville by itself DOES NOT provide common NIC
+capabilities such as offload or receive-side scaling (RSS).
+These capabilities would be viewed as a gate-level "tax" on
+Green-box FPGA applications that do not require such function.
+Instead, they can be added as needed with essentially no
+overhead to the FPGA Application.
+
+The ARK PMD also supports optional user extensions, through dynamic linking.
+The ARK PMD user extensions are a feature of Arkville’s DPDK
+net/ark poll mode driver, allowing users to add their
+own code to extend the net/ark functionality without
+having to make source code changes to the driver. One motivation for
+this capability is that while DPDK provides a rich set of functions
+to interact with NIC-like capabilities (e.g. MAC addresses and statistics),
+the Arkville RTL IP does not include a MAC.  Users can supply their
+own MAC or custom FPGA applications, which may require control from
+the PMD.  The user extension is the means providing the control
+between the user's FPGA application and the existing DPDK features via
+the PMD.
+
+Device Parameters
+-------------------
+
+The ARK PMD supports device parameters that are used for packet
+routing and for internal packet generation and packet checking.  This
+section describes the supported parameters.  These features are
+primarily used for diagnostics, testing, and performance verification
+under the guidance of an Arkville specialist.  The nominal use of
+Arkville does not require any configuration using these parameters.
+
+"Pkt_dir"
+
+The Packet Director controls connectivity between Arkville's internal
+hardware components. The features of the Pkt_dir are only used for
+diagnostics and testing; it is not intended for nominal use.  The full
+set of features are not published at this level.
+
+Format:
+Pkt_dir=0x00110F10
+
+"Pkt_gen"
+
+The packet generator parameter takes a file as its argument.  The file
+contains configuration parameters used internally for regression
+testing and are not intended to be published at this level.  The
+packet generator is an internal Arkville hardware component.
+
+Format:
+Pkt_gen=./config/pg.conf
+
+"Pkt_chkr"
+
+The packet checker parameter takes a file as its argument.  The file
+contains configuration parameters used internally for regression
+testing and are not intended to be published at this level.  The
+packet checker is an internal Arkville hardware component.
+
+Format:
+Pkt_chkr=./config/pc.conf
+
+
+Data Path Interface
+-------------------
+
+Ingress RX and Egress TX operation is by the nominal DPDK API .
+The driver supports single-port, multi-queue for both RX and TX.
+
+Refer to ``ark_ethdev.h`` for the list of supported methods to
+act upon RX and TX Queues.
+
+Configuration Information
+-------------------------
+
+**DPDK Configuration Parameters**
+
+  The following configuration options are available for the ARK PMD:
+
+   * **CONFIG_RTE_LIBRTE_ARK_PMD** (default y): Enables or disables inclusion
+     of the ARK PMD driver in the DPDK compilation.
+
+   * **CONFIG_RTE_LIBRTE_ARK_PAD_TX** (default y):  When enabled TX
+     packets are padded to 60 bytes to support downstream MACS.
+
+   * **CONFIG_RTE_LIBRTE_ARK_DEBUG_RX** (default n): Enables or disables debug
+     logging and internal checking of RX ingress logic within the ARK PMD driver.
+
+   * **CONFIG_RTE_LIBRTE_ARK_DEBUG_TX** (default n): Enables or disables debug
+     logging and internal checking of TX egress logic within the ARK PMD driver.
+
+   * **CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS** (default n): Enables or disables debug
+     logging of detailed packet and performance statistics gathered in
+     the PMD and FPGA.
+
+   * **CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE** (default n): Enables or disables debug
+     logging of detailed PMD events and status.
+
+
+Building DPDK
+-------------
+
+See the :ref:`DPDK Getting Started Guide for Linux <linux_gsg>` for
+instructions on how to build DPDK.
+
+By default the ARK PMD library will be built into the DPDK library.
+
+For configuring and using UIO and VFIO frameworks, please also refer :ref:`the
+documentation that comes with DPDK suite <linux_gsg>`.
+
+Supported ARK RTL PCIe Instances
+--------------------------------
+
+ARK PMD supports the following Arkville RTL PCIe instances including:
+
+* ``1d6c:100d`` - AR-ARKA-FX0 [Arkville 32B DPDK Data Mover]
+* ``1d6c:100e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover]
+
+Supported Operating Systems
+---------------------------
+
+Any Linux distribution fulfilling the conditions described in ``System Requirements``
+section of :ref:`the DPDK documentation <linux_gsg>` or refer to *DPDK
+Release Notes*.  ARM and PowerPC architectures are not supported at this time.
+
+
+Supported Features
+------------------
+
+* Dynamic ARK PMD extensions
+* Multiple receive and transmit queues
+* Jumbo frames up to 9K
+* Hardware Statistics
+
+Unsupported Features
+--------------------
+
+Features that may be part of, or become part of, the Arkville RTL IP that are
+not currently supported or exposed by the ARK PMD include:
+
+* PCIe SR-IOV Virtual Functions (VFs)
+* Arkville's Packet Generator Control and Status
+* Arkville's Packet Director Control and Status
+* Arkville's Packet Checker Control and Status
+* Arkville's Timebase Management
+
+Pre-Requisites
+--------------
+
+#. Prepare the system as recommended by DPDK suite.  This includes environment
+   variables, hugepages configuration, tool-chains and configuration
+
+#. Insert igb_uio kernel module using the command 'modprobe igb_uio'
+
+#. Bind the intended ARK device to igb_uio module
+
+At this point the system should be ready to run DPDK applications. Once the
+application runs to completion, the ARK PMD can be detached from igb_uio if necessary.
+
+Usage Example
+-------------
+
+This section demonstrates how to launch **testpmd** with Atomic Rules ARK
+devices managed by librte_pmd_ark.
+
+#. Load the kernel modules:
+
+   .. code-block:: console
+
+      modprobe uio
+      insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
+
+   .. note::
+
+      The ARK PMD driver depends upon the igb_uio user space I/O kernel module
+
+#. Mount and request huge pages:
+
+   .. code-block:: console
+
+      mount -t hugetlbfs nodev /mnt/huge
+      echo 256 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
+
+#. Bind UIO driver to ARK device at 0000:01:00.0 (using dpdk-devbind.py):
+
+   .. code-block:: console
+
+      ./usertools/dpdk-devbind.py --bind=igb_uio 0000:01:00.0
+
+   .. note::
+
+      The last argument to dpdk-devbind.py is the 4-tuple that indentifies a specific PCIe
+      device. You can use lspci -d 1d6c: to indentify all Atomic Rules devices in the system,
+      and thus determine the correct 4-tuple argument to dpdk-devbind.py
+
+#. Start testpmd with basic parameters:
+
+   .. code-block:: console
+
+      ./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -- -i
+
+   Example output:
+
+   .. code-block:: console
+
+      [...]
+      EAL: PCI device 0000:01:00.0 on NUMA socket -1
+      EAL:   probe driver: 1d6c:100e rte_ark_pmd
+      EAL:   PCI memory mapped at 0x7f9b6c400000
+      PMD: eth_ark_dev_init(): Initializing 0:2:0.1
+      ARKP PMD CommitID: 378f3a67
+      Configuring Port 0 (socket 0)
+      Port 0: DC:3C:F6:00:00:01
+      Checking link statuses...
+      Port 0 Link Up - speed 100000 Mbps - full-duplex
+      Done
+      testpmd>
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 503fd82..03391d0 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -36,6 +36,7 @@  Network Interface Controller Drivers
     :numbered:
 
     overview
+    ark
     avp
     bnx2x
     bnxt
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6c691a5..91f635c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -36,6 +36,8 @@  core-libs += librte_net librte_kvargs
 
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += af_packet
 DEPDIRS-af_packet = $(core-libs)
+DIRS-$(CONFIG_RTE_LIBRTE_ARK_PMD) += ark
+DEPDIRS-ark = $(core-libs)
 DIRS-$(CONFIG_RTE_LIBRTE_AVP_PMD) += avp
 DEPDIRS-avp = $(core-libs)
 DIRS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x
diff --git a/drivers/net/ark/Makefile b/drivers/net/ark/Makefile
new file mode 100644
index 0000000..86a36ee
--- /dev/null
+++ b/drivers/net/ark/Makefile
@@ -0,0 +1,56 @@ 
+# BSD LICENSE
+#
+# Copyright (c) 2015-2017 Atomic Rules LLC
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in
+#   the documentation and/or other materials provided with the
+#   distribution.
+# * Neither the name of copyright holder nor the names of its
+#   contributors may be used to endorse or promote products derived
+#   from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_ark.a
+
+CFLAGS += -O3 -I./
+CFLAGS += $(WERROR_FLAGS) -Werror
+
+EXPORT_MAP := rte_pmd_ark_version.map
+
+LIBABIVER := 1
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_ARK_PMD) += ark_ethdev.c
+
+
+# this lib depends upon:
+LDLIBS += -lpthread
+LDLIBS += -ldl
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/ark/ark_ethdev.c b/drivers/net/ark/ark_ethdev.c
new file mode 100644
index 0000000..fa5c9aa
--- /dev/null
+++ b/drivers/net/ark/ark_ethdev.c
@@ -0,0 +1,288 @@ 
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2015-2017 Atomic Rules LLC
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <sys/stat.h>
+#include <dlfcn.h>
+
+#include <rte_kvargs.h>
+
+#include "ark_global.h"
+#include "ark_logs.h"
+#include "ark_ethdev.h"
+
+/*  Internal prototypes */
+static int eth_ark_check_args(struct ark_adapter *ark, const char *params);
+static int eth_ark_dev_init(struct rte_eth_dev *dev);
+static int eth_ark_dev_uninit(struct rte_eth_dev *eth_dev);
+static int eth_ark_dev_configure(struct rte_eth_dev *dev);
+static void eth_ark_dev_info_get(struct rte_eth_dev *dev,
+				 struct rte_eth_dev_info *dev_info);
+
+/*
+ * The packet generator is a functional block used to generate packet
+ * patterns for testing.  It is not intended for nominal use.
+ */
+#define ARK_PKTGEN_ARG "Pkt_gen"
+
+/*
+ * The packet checker is a functional block used to verify packet
+ * patterns for testing.  It is not intended for nominal use.
+ */
+#define ARK_PKTCHKR_ARG "Pkt_chkr"
+
+/*
+ * The packet director is used to select the internal ingress and
+ * egress packets paths during testing.  It is not intended for
+ * nominal use.
+ */
+#define ARK_PKTDIR_ARG "Pkt_dir"
+
+/* Devinfo configurations */
+#define ARK_RX_MAX_QUEUE (4096 * 4)
+#define ARK_RX_MIN_QUEUE (512)
+#define ARK_RX_MAX_PKT_LEN ((16 * 1024) - 128)
+#define ARK_RX_MIN_BUFSIZE (1024)
+
+#define ARK_TX_MAX_QUEUE (4096 * 4)
+#define ARK_TX_MIN_QUEUE (256)
+
+static const char * const valid_arguments[] = {
+	ARK_PKTGEN_ARG,
+	ARK_PKTCHKR_ARG,
+	ARK_PKTDIR_ARG,
+	NULL
+};
+
+static const struct rte_pci_id pci_id_ark_map[] = {
+	{RTE_PCI_DEVICE(0x1d6c, 0x100d)},
+	{RTE_PCI_DEVICE(0x1d6c, 0x100e)},
+	{.vendor_id = 0, /* sentinel */ },
+};
+
+static struct eth_driver rte_ark_pmd = {
+	.pci_drv = {
+		.probe = rte_eth_dev_pci_probe,
+		.remove = rte_eth_dev_pci_remove,
+		.id_table = pci_id_ark_map,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC
+	},
+	.eth_dev_init = eth_ark_dev_init,
+	.eth_dev_uninit = eth_ark_dev_uninit,
+	.dev_private_size = sizeof(struct ark_adapter),
+};
+
+static const struct eth_dev_ops ark_eth_dev_ops = {
+	.dev_configure = eth_ark_dev_configure,
+	.dev_infos_get = eth_ark_dev_info_get,
+};
+
+static int
+eth_ark_dev_init(struct rte_eth_dev *dev)
+{
+	struct ark_adapter *ark =
+		(struct ark_adapter *)dev->data->dev_private;
+	struct rte_pci_device *pci_dev;
+	int ret = -1;
+
+	ark->eth_dev = dev;
+
+	PMD_FUNC_LOG(DEBUG, "\n");
+
+	pci_dev = ARK_DEV_TO_PCI(dev);
+	rte_eth_copy_pci_info(dev, pci_dev);
+
+	ark->bar0 = (uint8_t *)pci_dev->mem_resource[0].addr;
+	ark->a_bar = (uint8_t *)pci_dev->mem_resource[2].addr;
+
+	dev->dev_ops = &ark_eth_dev_ops;
+	dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
+
+	if (pci_dev->device.devargs)
+		ret = eth_ark_check_args(ark, pci_dev->device.devargs->args);
+	else
+		PMD_DRV_LOG(INFO, "No Device args found\n");
+
+	return ret;
+}
+
+static int
+eth_ark_dev_uninit(struct rte_eth_dev *dev)
+{
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+		return 0;
+
+	dev->dev_ops = NULL;
+	dev->rx_pkt_burst = NULL;
+	dev->tx_pkt_burst = NULL;
+	return 0;
+}
+
+static int
+eth_ark_dev_configure(struct rte_eth_dev *dev __rte_unused)
+{
+	PMD_FUNC_LOG(DEBUG, "\n");
+	return 0;
+}
+
+static void
+eth_ark_dev_info_get(struct rte_eth_dev *dev,
+		     struct rte_eth_dev_info *dev_info)
+{
+	dev_info->max_rx_pktlen = ARK_RX_MAX_PKT_LEN;
+	dev_info->min_rx_bufsize = ARK_RX_MIN_BUFSIZE;
+
+	dev_info->rx_desc_lim = (struct rte_eth_desc_lim) {
+		.nb_max = ARK_RX_MAX_QUEUE,
+		.nb_min = ARK_RX_MIN_QUEUE,
+		.nb_align = ARK_RX_MIN_QUEUE}; /* power of 2 */
+
+	dev_info->tx_desc_lim = (struct rte_eth_desc_lim) {
+		.nb_max = ARK_TX_MAX_QUEUE,
+		.nb_min = ARK_TX_MIN_QUEUE,
+		.nb_align = ARK_TX_MIN_QUEUE}; /* power of 2 */
+
+	/* ARK PMD supports all line rates, how do we indicate that here ?? */
+	dev_info->speed_capa = (ETH_LINK_SPEED_1G |
+				ETH_LINK_SPEED_10G |
+				ETH_LINK_SPEED_25G |
+				ETH_LINK_SPEED_40G |
+				ETH_LINK_SPEED_50G |
+				ETH_LINK_SPEED_100G);
+	dev_info->pci_dev = ARK_DEV_TO_PCI(dev);
+}
+
+static inline int
+process_pktdir_arg(const char *key, const char *value,
+		   void *extra_args)
+{
+	PMD_FUNC_LOG(DEBUG, "key = %s, value = %s\n",
+		    key, value);
+	struct ark_adapter *ark =
+		(struct ark_adapter *)extra_args;
+
+	ark->pkt_dir_v = strtol(value, NULL, 16);
+	PMD_FUNC_LOG(DEBUG, "pkt_dir_v = 0x%x\n", ark->pkt_dir_v);
+	return 0;
+}
+
+static inline int
+process_file_args(const char *key, const char *value, void *extra_args)
+{
+	PMD_FUNC_LOG(DEBUG, "key = %s, value = %s\n",
+		    key, value);
+	char *args = (char *)extra_args;
+
+	/* Open the configuration file */
+	FILE *file = fopen(value, "r");
+	char line[ARK_MAX_ARG_LEN];
+	int  size = 0;
+	int first = 1;
+
+	while (fgets(line, sizeof(line), file)) {
+		size += strlen(line);
+		if (size >= ARK_MAX_ARG_LEN) {
+			PMD_DRV_LOG(ERR, "Unable to parse file %s args, "
+				    "parameter list is too long\n", value);
+			fclose(file);
+			return -1;
+		}
+		if (first) {
+			strncpy(args, line, ARK_MAX_ARG_LEN);
+			first = 0;
+		} else {
+			strncat(args, line, ARK_MAX_ARG_LEN);
+		}
+	}
+	PMD_FUNC_LOG(DEBUG, "file = %s\n", args);
+	fclose(file);
+	return 0;
+}
+
+static int
+eth_ark_check_args(struct ark_adapter *ark, const char *params)
+{
+	struct rte_kvargs *kvlist;
+	unsigned int k_idx;
+	struct rte_kvargs_pair *pair = NULL;
+
+	kvlist = rte_kvargs_parse(params, valid_arguments);
+	if (kvlist == NULL)
+		return 0;
+
+	ark->pkt_gen_args[0] = 0;
+	ark->pkt_chkr_args[0] = 0;
+
+	for (k_idx = 0; k_idx < kvlist->count; k_idx++) {
+		pair = &kvlist->pairs[k_idx];
+		PMD_FUNC_LOG(DEBUG, "**** Arg passed to PMD = %s:%s\n",
+			     pair->key,
+			     pair->value);
+	}
+
+	if (rte_kvargs_process(kvlist,
+			       ARK_PKTDIR_ARG,
+			       &process_pktdir_arg,
+			       ark) != 0) {
+		PMD_DRV_LOG(ERR, "Unable to parse arg %s\n", ARK_PKTDIR_ARG);
+		return -1;
+	}
+
+	if (rte_kvargs_process(kvlist,
+			       ARK_PKTGEN_ARG,
+			       &process_file_args,
+			       ark->pkt_gen_args) != 0) {
+		PMD_DRV_LOG(ERR, "Unable to parse arg %s\n", ARK_PKTGEN_ARG);
+		return -1;
+	}
+
+	if (rte_kvargs_process(kvlist,
+			       ARK_PKTCHKR_ARG,
+			       &process_file_args,
+			       ark->pkt_chkr_args) != 0) {
+		PMD_DRV_LOG(ERR, "Unable to parse arg %s\n", ARK_PKTCHKR_ARG);
+		return -1;
+	}
+
+	PMD_DRV_LOG(INFO, "packet director set to 0x%x\n", ark->pkt_dir_v);
+
+	return 0;
+}
+
+RTE_PMD_REGISTER_PCI(net_ark, rte_ark_pmd.pci_drv);
+RTE_PMD_REGISTER_KMOD_DEP(net_ark, "* igb_uio | uio_pci_generic ");
+RTE_PMD_REGISTER_PCI_TABLE(net_ark, pci_id_ark_map);
+RTE_PMD_REGISTER_PARAM_STRING(net_ark,
+			      ARK_PKTGEN_ARG "=<filename> "
+			      ARK_PKTCHKR_ARG "=<filename> "
+			      ARK_PKTDIR_ARG "=<bitmap>");
diff --git a/drivers/net/ark/ark_ethdev.h b/drivers/net/ark/ark_ethdev.h
new file mode 100644
index 0000000..9f8d32f
--- /dev/null
+++ b/drivers/net/ark/ark_ethdev.h
@@ -0,0 +1,41 @@ 
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2015-2017 Atomic Rules LLC
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ARK_ETHDEV_H_
+#define _ARK_ETHDEV_H_
+
+#define ARK_DEV_TO_PCI(eth_dev)			\
+	RTE_DEV_TO_PCI((eth_dev)->device)
+
+
+#endif
diff --git a/drivers/net/ark/ark_global.h b/drivers/net/ark/ark_global.h
new file mode 100644
index 0000000..033ac87
--- /dev/null
+++ b/drivers/net/ark/ark_global.h
@@ -0,0 +1,116 @@ 
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2015-2017 Atomic Rules LLC
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ARK_GLOBAL_H_
+#define _ARK_GLOBAL_H_
+
+#include <time.h>
+#include <assert.h>
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+#include <rte_string_fns.h>
+#include <rte_cycles.h>
+#include <rte_kvargs.h>
+#include <rte_dev.h>
+#include <rte_version.h>
+
+#define ETH_ARK_ARG_MAXLEN	64
+#define ARK_SYSCTRL_BASE  0x0
+#define ARK_PKTGEN_BASE   0x10000
+#define ARK_MPU_RX_BASE   0x20000
+#define ARK_UDM_BASE      0x30000
+#define ARK_MPU_TX_BASE   0x40000
+#define ARK_DDM_BASE      0x60000
+#define ARK_CMAC_BASE     0x80000
+#define ARK_PKTDIR_BASE   0xa0000
+#define ARK_PKTCHKR_BASE  0x90000
+#define ARK_RCPACING_BASE 0xb0000
+#define ARK_EXTERNAL_BASE 0x100000
+#define ARK_MPU_QOFFSET   0x00100
+#define ARK_MAX_PORTS     8
+
+#define offset8(n)     n
+#define offset16(n)   ((n) / 2)
+#define offset32(n)   ((n) / 4)
+#define offset64(n)   ((n) / 8)
+
+/* Maximum length of arg list in bytes */
+#define ARK_MAX_ARG_LEN 256
+
+/*
+ * Structure to store private data for each PF/VF instance.
+ */
+#define def_ptr(type, name) \
+	union type {		   \
+		uint64_t *t64;	   \
+		uint32_t *t32;	   \
+		uint16_t *t16;	   \
+		uint8_t  *t8;	   \
+		void     *v;	   \
+	} name
+
+struct ark_port {
+	struct rte_eth_dev *eth_dev;
+	int id;
+};
+
+struct ark_adapter {
+	/* User extension private data */
+	void *user_data;
+
+	struct ark_port port[ARK_MAX_PORTS];
+	int num_ports;
+
+	/* Packet generator/checker args */
+	char pkt_gen_args[ARK_MAX_ARG_LEN];
+	char pkt_chkr_args[ARK_MAX_ARG_LEN];
+	uint32_t pkt_dir_v;
+
+	/* eth device */
+	struct rte_eth_dev *eth_dev;
+
+	void *d_handle;
+
+	/* Our Bar 0 */
+	uint8_t *bar0;
+
+	/* Application Bar */
+	uint8_t *a_bar;
+};
+
+typedef uint32_t *ark_t;
+
+#endif
diff --git a/drivers/net/ark/ark_logs.h b/drivers/net/ark/ark_logs.h
new file mode 100644
index 0000000..8aff296
--- /dev/null
+++ b/drivers/net/ark/ark_logs.h
@@ -0,0 +1,119 @@ 
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2015-2017 Atomic Rules LLC
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ARK_DEBUG_H_
+#define _ARK_DEBUG_H_
+
+#include <inttypes.h>
+#include <rte_log.h>
+
+
+/* Configuration option to pad TX packets to 60 bytes */
+#ifdef RTE_LIBRTE_ARK_PAD_TX
+#define ARK_TX_PAD_TO_60   1
+#else
+#define ARK_TX_PAD_TO_60   0
+#endif
+
+/* system camel case definition changed to upper case */
+#define PRIU32 PRIu32
+#define PRIU64 PRIu64
+
+/* Format specifiers for string data pairs */
+#define ARK_SU32  "\n\t%-20s    %'20" PRIU32
+#define ARK_SU64  "\n\t%-20s    %'20" PRIU64
+#define ARK_SU64X "\n\t%-20s    %#20" PRIx64
+#define ARK_SPTR  "\n\t%-20s    %20p"
+
+
+
+#define PMD_DRV_LOG(level, fmt, args...)	\
+	RTE_LOG(level, PMD, fmt, ## args)
+
+/* Conditional trace definitions */
+#define ARK_TRACE_ON(level, fmt, ...)		\
+	RTE_LOG(level, PMD, fmt, ##__VA_ARGS__)
+
+/* This pattern allows compiler check arguments even if disabled  */
+#define ARK_TRACE_OFF(level, fmt, ...)					\
+	do {if (0) RTE_LOG(level, PMD, fmt, ##__VA_ARGS__); }		\
+	while (0)
+
+
+/* tracing including the function name */
+#define ARK_FUNC_ON(level, fmt, args...) \
+	RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args)
+
+/* tracing including the function name */
+#define ARK_FUNC_OFF(level, fmt, args...)				\
+	do { if (0) RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args); } \
+	while (0)
+
+
+/* Debug macro for tracing full behavior, function tracing and messages*/
+#ifdef RTE_LIBRTE_ARK_DEBUG_TRACE
+#define PMD_FUNC_LOG(level, fmt, ...) ARK_FUNC_ON(level, fmt, ##__VA_ARGS__)
+#define PMD_DEBUG_LOG(level, fmt, ...) ARK_TRACE_ON(level, fmt, ##__VA_ARGS__)
+#else
+#define PMD_FUNC_LOG(level, fmt, ...) ARK_FUNC_OFF(level, fmt, ##__VA_ARGS__)
+#define PMD_DEBUG_LOG(level, fmt, ...) ARK_TRACE_OFF(level, fmt, ##__VA_ARGS__)
+#endif
+
+
+/* Debug macro for reporting FPGA statistics */
+#ifdef RTE_LIBRTE_ARK_DEBUG_STATS
+#define PMD_STATS_LOG(level, fmt, ...) ARK_TRACE_ON(level, fmt, ##__VA_ARGS__)
+#else
+#define PMD_STATS_LOG(level, fmt, ...)  ARK_TRACE_OFF(level, fmt, ##__VA_ARGS__)
+#endif
+
+
+/* Debug macro for RX path */
+#ifdef RTE_LIBRTE_ARK_DEBUG_RX
+#define ARK_RX_DEBUG 1
+#define PMD_RX_LOG(level, fmt, ...)  ARK_TRACE_ON(level, fmt, ##__VA_ARGS__)
+#else
+#define ARK_RX_DEBUG 0
+#define PMD_RX_LOG(level, fmt, ...)  ARK_TRACE_OFF(level, fmt, ##__VA_ARGS__)
+#endif
+
+/* Debug macro for TX path */
+#ifdef RTE_LIBRTE_ARK_DEBUG_TX
+#define ARK_TX_DEBUG       1
+#define PMD_TX_LOG(level, fmt, ...)  ARK_TRACE_ON(level, fmt, ##__VA_ARGS__)
+#else
+#define ARK_TX_DEBUG       0
+#define PMD_TX_LOG(level, fmt, ...)  ARK_TRACE_OFF(level, fmt, ##__VA_ARGS__)
+#endif
+
+#endif
diff --git a/drivers/net/ark/rte_pmd_ark_version.map b/drivers/net/ark/rte_pmd_ark_version.map
new file mode 100644
index 0000000..1062e04
--- /dev/null
+++ b/drivers/net/ark/rte_pmd_ark_version.map
@@ -0,0 +1,4 @@ 
+DPDK_17.05 {
+	 local: *;
+
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index b67d509..bdc8ea5 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -102,6 +102,7 @@  ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 # plugins (link only if static libraries)
 
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET)  += -lrte_pmd_af_packet
+_LDLIBS-$(CONFIG_RTE_LIBRTE_ARK_PMD)        += -lrte_pmd_ark
 _LDLIBS-$(CONFIG_RTE_LIBRTE_AVP_PMD)        += -lrte_pmd_avp
 _LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD)      += -lrte_pmd_bnx2x -lz
 _LDLIBS-$(CONFIG_RTE_LIBRTE_BNXT_PMD)       += -lrte_pmd_bnxt