[dpdk-dev,v2,3/3] doc: add support for Intel QAT device D15xx
Checks
Commit Message
Add instructions for D15xx device to the QAT PMD guide.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
doc/guides/cryptodevs/qat.rst | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
Comments
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Fiona Trahe
> Sent: Thursday, March 9, 2017 7:21 PM
> To: dev@dpdk.org; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>;
> Kusztal, ArkadiuszX <arkadiuszx.kusztal@intel.com>
> Cc: Jain, Deepak K <deepak.k.jain@intel.com>; Trahe, Fiona
> <fiona.trahe@intel.com>; Griffin, John <john.griffin@intel.com>
> Subject: [dpdk-dev] [PATCH v2 3/3] doc: add support for Intel QAT device
> D15xx
>
> Add instructions for D15xx device to the QAT PMD guide.
>
This will need to be rebased/updated to match the comments from the patch 2/3.
Regards,
John
@@ -36,6 +36,7 @@ hardware accelerator devices:
* ``Intel QuickAssist Technology DH895xCC``
* ``Intel QuickAssist Technology C62x``
* ``Intel QuickAssist Technology C3xxx``
+* ``Intel QuickAssist Technology D15xx``
Features
@@ -111,12 +112,15 @@ available kernel drivers and device ids are :
DH895xCC,4.4+,qat_dh895xcc,dh895xcc,435,1,443,32
C62x,4.5+,qat_c62x,c6xx,37c8,3,37c9,16
C3xxx,4.5+,qat_c3xxx,c3xxx,19e2,1,19e3,16
+ D15xx,**,qat_d15xx,d15xx,6f54,1,6f55,16
The ``driver`` column indicates either the linux kernel version in which support
for this device was introduced or a driver available on Intel's 01.org website.
There are both linux and 01.org kernel drivers available for some devices.
+ ** Release to be confirmed.
+
If you are running on a kernel which includes a driver for your device, see
`Installation using kernel.org driver`_ below. Otherwise see
@@ -308,7 +312,7 @@ the unbind command below::
done; \
done
-For **Intel(R) QuickAssist Technology C3xxx** device:
+For **Intel(R) QuickAssist Technology C3xxx or D15xx** device:
The unbind command below assumes ``bdfs`` of ``01:01.00-01:02.07``,
if your VFs are different adjust the unbind command below::