[dpdk-dev,v9,09/12] test: add test cases for scan and probe on BUS
Checks
Commit Message
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
app/test/test_bus.c | 152 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 152 insertions(+)
@@ -120,12 +120,15 @@ static int scan_fn_for_busB(void);
/* generic implementations wrapped around by above declarations */
static int generic_scan_fn(struct rte_bus *bus);
+static int generic_probe_fn(void);
+static int dummy_match_fn(struct rte_driver *drv, struct rte_device *dev);
struct dummy_bus busA = {
.name = "busA_impl", /* busA */
.bus = {
.name = "busA",
.scan = scan_fn_for_busA,
+ .probe = generic_probe_fn,
},
};
@@ -134,6 +137,7 @@ struct dummy_bus busB = {
.bus = {
.name = "busB",
.scan = scan_fn_for_busB,
+ .probe = generic_probe_fn,
},
};
@@ -288,6 +292,46 @@ generic_scan_fn(struct rte_bus *bus)
return 0;
}
+/* @internal
+ * Obtain bus from driver object. Match the address of rte_device object
+ * with all the devices associated with that bus.
+ *
+ * Being a test function, all this does is validate that device object
+ * provided is available on the same bus to which driver is registered.
+ *
+ * @param drv
+ * driver to match with
+ * @param dev
+ * device object
+ * @return
+ * 0 for successful match
+ * !0 for failed match
+ */
+static int
+dummy_match_fn(struct rte_driver *drv __rte_unused, struct rte_device *dev)
+{
+ struct rte_bus *bus;
+ struct dummy_device *ddev = NULL;
+ struct dummy_device *ddev_as_arg;
+ struct dummy_bus *dbus = NULL;
+
+ /* Match is based entirely on address of 'dev' and 'dev_p' extracted
+ * from bus->device_list.
+ */
+
+ /* a driver is registered with the bus *before* the scan. */
+ bus = dev->bus;
+ dbus = container_of(bus, struct dummy_bus, bus);
+ ddev_as_arg = container_of(dev, struct dummy_device, dev);
+
+ TAILQ_FOREACH(ddev, &dbus->device_list, next) {
+ if (ddev == ddev_as_arg)
+ return 0;
+ }
+
+ return 1;
+}
+
int
scan_fn_for_busA(void) {
struct dummy_bus_map *dbm;
@@ -504,6 +548,110 @@ test_bus_scan(void)
return 0;
}
+/*
+ *
+ */
+static int
+generic_probe_fn(void)
+{
+ int ret = 0;
+ int i, j;
+ struct rte_driver *drv;
+ struct rte_device *dev;
+ struct dummy_bus *dbus = NULL;
+ struct dummy_device *ddev = NULL;
+ struct dummy_driver *ddrv = NULL;
+
+ /* In case of this test:
+ * 1. for each bus in rte_bus_list
+ * 2. for each device on that bus (bus specific->device_list)
+ * 3. for each driver on that bus (bus specific->driver_list)
+ * 4. call match
+ * 5. link driver and device
+ * 6. Verify the linkage.
+ */
+ for (i = 0; bus_map[i].name; i++) {
+ /* get bus pointer from bus_map itself */
+ dbus = bus_map[i].dbus;
+
+ /* Looping over all scanned devices */
+ TAILQ_FOREACH(ddev, &dbus->device_list, next) {
+ /* There is a list of drivers within dummy_bus_map.
+ * In case of PMDs, this would be driver registration
+ * APIs/list
+ */
+ for (j = 0; bus_map[i].ddrivers[j]; j++) {
+ ddrv = bus_map[i].ddrivers[j];
+
+ drv = &ddrv->drv;
+ dev = &ddev->dev;
+ ret = dummy_match_fn(drv, dev);
+ if (!ret) {
+ /* As match is generic, it always
+ * results in dev->drv pointing to
+ * first driver entry in bus_map[i]
+ */
+ dev->driver = drv;
+ dev->bus = &dbus->bus;
+ }
+ /* Else, continue */
+ }
+ }
+ }
+
+ /* Verify the linkage. All devices belonging to a bus_map[i]
+ * should have same driver (first driver entry of bus_map[i])
+ */
+ for (i = 0; bus_map[i].name; i++) {
+ ddrv = bus_map[i].ddrivers[0];
+ drv = &ddrv->drv;
+
+ for (j = 0; bus_map[i].ddevices[j]; j++) {
+ ddev = bus_map[i].ddevices[j];
+ dev = &ddev->dev;
+ if (dev->driver != drv) {
+ printf("Incorrect driver<->device linkage.\n");
+ return -1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* @internal
+ * Function to perform 'probe' and link devices and drivers on a bus.
+ * This would work over all the buses registered, and all devices and drivers
+ * registered with it - call match on each pair.
+ *
+ * @param void
+ * @return
+ * 0 for successful probe
+ * !0 for failure in probe
+ *
+ */
+static int
+test_probe_on_bus(void)
+{
+ int ret = 0;
+ int i;
+ struct dummy_bus *dbus;
+ struct rte_bus *bus;
+
+ for (i = 0; bus_map[i].name; i++) {
+ /* get bus pointer from bus_map itself */
+ dbus = bus_map[i].dbus;
+ bus = &dbus->bus;
+ ret = bus->probe();
+ if (ret)
+ printf("Probe for %s failed.\n", bus_map[i].name);
+ }
+
+ printf("Probe on all buses successful.\n");
+ dump_device_tree();
+
+ return 0;
+}
int
test_bus(void)
@@ -518,6 +666,10 @@ test_bus(void)
if (test_bus_scan())
return -1;
+ /* Now that the devices and drivers are registered, perform probe */
+ if (test_probe_on_bus())
+ return -1;
+
if (test_device_unregistration_on_bus())
return -1;