diff mbox

[dpdk-dev,15/15] i40e/base: add capability of disabling all link

Message ID 1462438424-22574-16-git-send-email-helin.zhang@intel.com (mailing list archive)
State Superseded, archived
Delegated to: Bruce Richardson
Headers show

Commit Message

Helin Zhang May 5, 2016, 8:53 a.m. UTC
It adds a flag, which can be used to tell the firmware to
disable the link on all ports.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
 doc/guides/rel_notes/release_16_07.rst  | 7 +++++++
 drivers/net/i40e/Makefile               | 2 +-
 drivers/net/i40e/base/i40e_adminq_cmd.h | 3 +++
 3 files changed, 11 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/doc/guides/rel_notes/release_16_07.rst b/doc/guides/rel_notes/release_16_07.rst
index 001888f..235f3cb 100644
--- a/doc/guides/rel_notes/release_16_07.rst
+++ b/doc/guides/rel_notes/release_16_07.rst
@@ -34,6 +34,13 @@  This section should contain new features added in this release. Sample format:
 
   Refer to the previous release notes for examples.
 
+* **Updated the i40e base driver.**
+
+  The i40e base driver was updated with changes which includes the
+  following:
+
+  * Add new X722 and XXV710 device IDs
+
 
 Resolved Issues
 ---------------
diff --git a/drivers/net/i40e/Makefile b/drivers/net/i40e/Makefile
index 6dd6eaa..dd941f4 100644
--- a/drivers/net/i40e/Makefile
+++ b/drivers/net/i40e/Makefile
@@ -85,7 +85,7 @@  VPATH += $(SRCDIR)/base
 
 #
 # all source are stored in SRCS-y
-# base driver is based on the package of dpdk-i40e.2016.01.07.14.tar.gz.
+# base driver is based on the package of dpdk-i40e.2016.04.18.12.tar.gz.
 #
 SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_adminq.c
 SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_common.c
diff --git a/drivers/net/i40e/base/i40e_adminq_cmd.h b/drivers/net/i40e/base/i40e_adminq_cmd.h
index cccc968..2b7a760 100644
--- a/drivers/net/i40e/base/i40e_adminq_cmd.h
+++ b/drivers/net/i40e/base/i40e_adminq_cmd.h
@@ -1899,7 +1899,10 @@  struct i40e_aqc_set_phy_debug {
 #define I40E_AQ_PHY_DEBUG_RESET_EXTERNAL_NONE	0x00
 #define I40E_AQ_PHY_DEBUG_RESET_EXTERNAL_HARD	0x01
 #define I40E_AQ_PHY_DEBUG_RESET_EXTERNAL_SOFT	0x02
+/* Disable link manageability on a single port */
 #define I40E_AQ_PHY_DEBUG_DISABLE_LINK_FW	0x10
+/* Disable link manageability on all ports needs both bits 4 and 5 */
+#define I40E_AQ_PHY_DEBUG_DISABLE_ALL_LINK_FW	0x20
 	u8	reserved[15];
 };