@@ -36,6 +36,7 @@
#include <sys/un.h>
#include <pthread.h>
#include <fcntl.h>
+#include <sys/eventfd.h>
#include <rte_malloc.h>
@@ -43,6 +44,12 @@
#include "virtio_ethdev.h"
#include "qtest_utils.h"
+/* PIIX3 configuration registers */
+#define PIIX3_REG_ADDR_PIRQA 0x60
+#define PIIX3_REG_ADDR_PIRQB 0x61
+#define PIIX3_REG_ADDR_PIRQC 0x62
+#define PIIX3_REG_ADDR_PIRQD 0x63
+
/* ivshmem configuration */
#define IVSHMEM_PROTOCOL_VERSION 0
@@ -74,6 +81,14 @@ struct qtest_session {
size_t evq_total_len;
union qtest_pipefds msgfds;
+
+ int irqno;
+ pthread_t intr_th;
+ int intr_th_started;
+ int eventfd;
+ rte_atomic16_t enable_intr;
+ rte_intr_callback_fn cb;
+ void *cb_arg;
};
static int
@@ -230,6 +245,29 @@ qtest_pci_inb(struct qtest_session *s, uint8_t bus, uint8_t device,
return (tmp >> ((offset & 0x3) * 8)) & 0xff;
}
+static void
+qtest_pci_outb(struct qtest_session *s, uint8_t bus, uint8_t device,
+ uint8_t function, uint8_t offset, uint8_t value)
+{
+ uint32_t addr, tmp, pos;
+
+ addr = PCI_CONFIG_ADDR(bus, device, function, offset);
+ pos = (offset % 4) * 8;
+
+ if (pthread_mutex_lock(&s->qtest_session_lock) < 0)
+ rte_panic("Cannot lock mutex\n");
+
+ qtest_raw_out(s, 0xcf8, addr, 'l');
+ tmp = qtest_raw_in(s, 0xcfc, 'l');
+ tmp = (tmp & ~(0xff << pos)) | (value << pos);
+
+ qtest_raw_out(s, 0xcf8, addr, 'l');
+ qtest_raw_out(s, 0xcfc, tmp, 'l');
+
+ if (pthread_mutex_unlock(&s->qtest_session_lock) < 0)
+ rte_panic("Cannot unlock mutex\n");
+}
+
static uint32_t
qtest_pci_inl(struct qtest_session *s, uint8_t bus, uint8_t device,
uint8_t function, uint8_t offset)
@@ -389,15 +427,112 @@ qtest_find_device(struct qtest_session *s, const char *name)
return NULL;
}
+int
+qtest_intr_enable(struct qtest_session *s)
+{
+ rte_atomic16_set(&s->enable_intr, 1);
+
+ return 0;
+}
+
+int
+qtest_intr_disable(struct qtest_session *s)
+{
+ rte_atomic16_set(&s->enable_intr, 0);
+
+ return 0;
+}
+
+void
+qtest_intr_callback_register(struct qtest_session *s,
+ rte_intr_callback_fn cb, void *cb_arg)
+{
+ s->cb = cb;
+ s->cb_arg = cb_arg;
+ rte_atomic16_set(&s->enable_intr, 1);
+}
+
+void
+qtest_intr_callback_unregister(struct qtest_session *s,
+ rte_intr_callback_fn cb __rte_unused,
+ void *cb_arg __rte_unused)
+{
+ rte_atomic16_set(&s->enable_intr, 0);
+ s->cb = NULL;
+ s->cb_arg = NULL;
+}
+
+static void *
+qtest_intr_handler(void *data) {
+ struct qtest_session *s = (struct qtest_session *)data;
+ eventfd_t value;
+ int ret;
+
+ for (;;) {
+ ret = eventfd_read(s->eventfd, &value);
+ if (ret < 0)
+ return NULL;
+ s->cb(NULL, s->cb_arg);
+ }
+ return NULL;
+}
+
+static int
+qtest_intr_initialize(struct qtest_session *s)
+{
+ char buf[64];
+ int ret;
+
+ snprintf(buf, sizeof(buf), "irq_intercept_in ioapic\n");
+
+ if (pthread_mutex_lock(&s->qtest_session_lock) < 0)
+ rte_panic("Cannot lock mutex\n");
+
+ /* To enable interrupt, send "irq_intercept_in" message to QEMU */
+ ret = qtest_raw_send(s->qtest_socket, buf, strlen(buf));
+ if (ret < 0) {
+ pthread_mutex_unlock(&s->qtest_session_lock);
+ return -1;
+ }
+
+ /* just ignore QEMU response */
+ ret = qtest_raw_recv(s->msgfds.readfd, buf, sizeof(buf));
+ if (ret < 0) {
+ pthread_mutex_unlock(&s->qtest_session_lock);
+ return -1;
+ }
+
+ if (pthread_mutex_unlock(&s->qtest_session_lock) < 0)
+ rte_panic("Cannot lock mutex\n");
+
+ return 0;
+}
+
static void
qtest_event_send(struct qtest_session *s, char *buf)
{
+ char interrupt_message[32];
int ret;
- /* relay normal message to pipe */
- ret = qtest_raw_send(s->msgfds.writefd, buf, strlen(buf));
- if (ret < 0)
- rte_panic("cannot relay normal message\n");
+ /* This message will come when interrupt occurs */
+ snprintf(interrupt_message, sizeof(interrupt_message),
+ "IRQ raise %d", s->irqno);
+
+ if (strncmp(buf, interrupt_message,
+ strlen(interrupt_message)) == 0) {
+ if (rte_atomic16_read(&s->enable_intr) == 0)
+ return;
+
+ /* relay interrupt to eventfd */
+ ret = eventfd_write(s->eventfd, 1);
+ if (ret < 0)
+ rte_panic("cannot relay interrupt\n");
+ } else {
+ /* relay normal message to pipe */
+ ret = qtest_raw_send(s->msgfds.writefd, buf, strlen(buf));
+ if (ret < 0)
+ rte_panic("cannot relay normal message\n");
+ }
}
static void
@@ -415,6 +550,7 @@ qtest_close_sockets(struct qtest_session *s)
qtest_close_one_socket(&s->qtest_socket);
qtest_close_one_socket(&s->msgfds.readfd);
qtest_close_one_socket(&s->msgfds.writefd);
+ qtest_close_one_socket(&s->eventfd);
qtest_close_one_socket(&s->ivshmem_socket);
}
@@ -518,6 +654,57 @@ qtest_event_handler(void *data) {
return NULL;
}
+/* This function should be fixed when multiple target devices are supported */
+int
+qtest_init_piix3_device(struct qtest_session *s, struct qtest_pci_device *dev)
+{
+ uint8_t bus, device, slot = 0;
+ struct qtest_pci_device *tmpdev;
+ uint8_t pcislot2regaddr[] = { 0xff,
+ 0xff,
+ 0xff,
+ PIIX3_REG_ADDR_PIRQC,
+ PIIX3_REG_ADDR_PIRQD,
+ PIIX3_REG_ADDR_PIRQA,
+ PIIX3_REG_ADDR_PIRQB};
+
+ bus = dev->bus_addr;
+ device = dev->device_addr;
+
+ PMD_DRV_LOG(INFO,
+ "Find %s on virtual PCI bus: %04x:%02x:00.0\n",
+ dev->name, bus, device);
+
+ /* Get slot id that is connected to target device(virtio-net device) */
+ TAILQ_FOREACH(tmpdev, &s->head, next) {
+ if (strcmp(tmpdev->name, "piix3") != 0 &&
+ strcmp(tmpdev->name, "ivshmem") != 0) {
+ slot = tmpdev->device_addr;
+ break;
+ }
+ }
+
+ if (slot == 0)
+ return -1;
+
+ /*
+ * Set interrupt routing for target device.
+ * Here is i440fx/piix3 connection settings
+ * ---------------------------------------
+ * PCI Slot3 -> PIRQC
+ * PCI Slot4 -> PIRQD
+ * PCI Slot5 -> PIRQA
+ * PCI Slot6 -> PIRQB
+ */
+ if (pcislot2regaddr[slot] != 0xff) {
+ qtest_pci_outb(s, bus, device, 0,
+ pcislot2regaddr[slot],
+ s->irqno);
+ }
+
+ return 0;
+}
+
/*
* Common initialization of PCI device.
* To know detail, see pci specification.
@@ -855,6 +1042,12 @@ qtest_vdev_uninit(struct qtest_session *s)
s->event_th_started = 0;
}
+ if (s->intr_th_started) {
+ pthread_cancel(s->intr_th);
+ pthread_join(s->intr_th, NULL);
+ s->intr_th_started = 0;
+ }
+
pthread_mutex_destroy(&s->qtest_session_lock);
qtest_remove_target_devices(s);
rte_free(s);
@@ -862,7 +1055,7 @@ qtest_vdev_uninit(struct qtest_session *s)
struct qtest_session *
qtest_vdev_init(char *qtest_path, char *ivshmem_path,
- struct qtest_pci_device *devices, int devnum)
+ int irqno, struct qtest_pci_device *devices, int devnum)
{
struct qtest_session *s;
int ret;
@@ -886,12 +1079,21 @@ qtest_vdev_init(char *qtest_path, char *ivshmem_path,
goto error;
}
+ s->eventfd = eventfd(0, 0);
+ if (s->eventfd < 0) {
+ PMD_DRV_LOG(ERR, "Failed to open eventfd\n");
+ goto error;
+ }
+
ret = qtest_register_target_devices(s, devices, devnum);
if (ret != 0) {
PMD_DRV_LOG(ERR, "Failed to initialize qtest session\n");
goto error;
}
+ rte_atomic16_set(&s->enable_intr, 0);
+ s->irqno = irqno;
+
s->ivshmem_socket = qtest_open_socket(ivshmem_path);
if (s->ivshmem_socket < 0) {
PMD_DRV_LOG(ERR, "Failed to open %s\n", ivshmem_path);
@@ -911,6 +1113,19 @@ qtest_vdev_init(char *qtest_path, char *ivshmem_path,
}
s->event_th_started = 1;
+ ret = pthread_create(&s->intr_th, NULL, qtest_intr_handler, s);
+ if (ret != 0) {
+ PMD_DRV_LOG(ERR, "Failed to create interrupt handler\n");
+ goto error;
+ }
+ s->intr_th_started = 1;
+
+ ret = qtest_intr_initialize(s);
+ if (ret != 0) {
+ PMD_DRV_LOG(ERR, "Failed to initialize interrupt\n");
+ goto error;
+ }
+
ret = qtest_setup_shared_memory(s);
if (ret != 0) {
PMD_DRV_LOG(ERR, "Failed to setup shared memory\n");
@@ -134,6 +134,8 @@ struct qtest_pci_device {
* Path of qtest socket.
* @param ivshmem_path
* Path of ivshmem socket.
+ * @param irqno
+ * Interrupt number of the target device(virtio-net device).
* @param devices
* Array of device information. It should contain piix3, ivshmem and target
* device(virtio-net device).
@@ -143,7 +145,7 @@ struct qtest_pci_device {
* The pointer to qtest session structure.
*/
struct qtest_session *qtest_vdev_init(char *qtest_path, char *ivshmem_path,
- struct qtest_pci_device *devices, int devnum);
+ int irqno, struct qtest_pci_device *devices, int devnum);
/**
* @internal
@@ -156,6 +158,56 @@ void qtest_vdev_uninit(struct qtest_session *s);
/**
* @internal
+ * Register interrupt callback.
+ *
+ * @param s
+ * The pointer to qtest session structure.
+ * @param cb
+ * The pointer to callback.
+ * @param cb_arg
+ * The pointer to callback argument.
+ */
+void qtest_intr_callback_register(struct qtest_session *s,
+ rte_intr_callback_fn cb, void *cb_arg);
+
+/**
+ * @internal
+ * Unregister interrupt callback.
+ *
+ * @param s
+ * The pointer to qtest session structure.
+ * @param cb
+ * The pointer to callback.
+ * @param cb_arg
+ * The pointer to callback argument.
+ */
+void qtest_intr_callback_unregister(struct qtest_session *s,
+ rte_intr_callback_fn cb, void *cb_arg);
+
+/**
+ * @internal
+ * Enable interrupt callback.
+ *
+ * @param s
+ * The pointer to qtest session structure.
+ * @return
+ * 0 on success, negative on error
+ */
+int qtest_intr_enable(struct qtest_session *s);
+
+/**
+ * @internal
+ * Disable interrupt callback.
+ *
+ * @param s
+ * The pointer to qtest session structure.
+ * @return
+ * 0 on success, negative on error
+ */
+int qtest_intr_disable(struct qtest_session *s);
+
+/**
+ * @internal
* Read a port of QEMU guest.
*
* @param s
@@ -218,6 +270,20 @@ void qtest_write(struct qtest_session *s, uint64_t addr,
/**
* @internal
+ * Initialization function of piix3 device.
+ *
+ * @param s
+ * The pointer to qtest session structure.
+ * @param dev
+ * The pointer of pci device.
+ * @return
+ * 0 on success, negative on error
+ */
+int qtest_init_piix3_device(struct qtest_session *s,
+ struct qtest_pci_device *dev);
+
+/**
+ * @internal
* Initialization function of general device.
*
* @param s