@@ -165,6 +165,8 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_set_port_parameters = 0x0203,
i40e_aqc_opc_get_switch_resource_alloc = 0x0204,
i40e_aqc_opc_set_switch_config = 0x0205,
+ i40e_aqc_opc_rx_ctl_reg_read = 0x0206,
+ i40e_aqc_opc_rx_ctl_reg_write = 0x0207,
i40e_aqc_opc_add_vsi = 0x0210,
i40e_aqc_opc_update_vsi_parameters = 0x0211,
@@ -752,6 +754,20 @@ struct i40e_aqc_set_switch_config {
I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config);
+/* Read Receive control registers (direct 0x0206)
+ * Write Receive control registers (direct 0x0207)
+ * used for accessing Rx control registers that can be
+ * slow and need special handling when under high Rx load
+ */
+struct i40e_aqc_rx_ctl_reg_read_write {
+ __le32 reserved1;
+ __le32 address;
+ __le32 reserved2;
+ __le32 value;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_rx_ctl_reg_read_write);
+
/* Add VSI (indirect 0x0210)
* this indirect command uses struct i40e_aqc_vsi_properties_data
* as the indirect buffer (128 bytes)
@@ -5356,7 +5356,7 @@ enum i40e_status_code i40e_set_filter_control(struct i40e_hw *hw,
return ret;
/* Read the PF Queue Filter control register */
- val = rd32(hw, I40E_PFQF_CTL_0);
+ val = i40e_read_rx_ctl(hw, I40E_PFQF_CTL_0);
/* Program required PE hash buckets for the PF */
val &= ~I40E_PFQF_CTL_0_PEHSIZE_MASK;
@@ -5393,7 +5393,7 @@ enum i40e_status_code i40e_set_filter_control(struct i40e_hw *hw,
if (settings->enable_macvlan)
val |= I40E_PFQF_CTL_0_MACVLAN_ENA_MASK;
- wr32(hw, I40E_PFQF_CTL_0, val);
+ i40e_write_rx_ctl(hw, I40E_PFQF_CTL_0, val);
return I40E_SUCCESS;
}
@@ -6317,6 +6317,128 @@ restore_config:
return status;
}
#endif /* PF_DRIVER */
+
+/**
+ * i40e_aq_rx_ctl_read_register - use FW to read from an Rx control register
+ * @hw: pointer to the hw struct
+ * @reg_addr: register address
+ * @reg_val: ptr to register value
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Use the firmware to read the Rx control register,
+ * especially useful if the Rx unit is under heavy pressure
+ **/
+enum i40e_status_code i40e_aq_rx_ctl_read_register(struct i40e_hw *hw,
+ u32 reg_addr, u32 *reg_val,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aqc_rx_ctl_reg_read_write *cmd_resp =
+ (struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw;
+ enum i40e_status_code status;
+
+ if (reg_val == NULL)
+ return I40E_ERR_PARAM;
+
+ i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_rx_ctl_reg_read);
+
+ cmd_resp->address = CPU_TO_LE32(reg_addr);
+
+ status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+ if (status == I40E_SUCCESS)
+ *reg_val = LE32_TO_CPU(cmd_resp->value);
+
+ return status;
+}
+
+/**
+ * i40e_read_rx_ctl - read from an Rx control register
+ * @hw: pointer to the hw struct
+ * @reg_addr: register address
+ **/
+u32 i40e_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr)
+{
+ enum i40e_status_code status = I40E_SUCCESS;
+ bool use_register;
+ int retry = 5;
+ u32 val = 0;
+
+ use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
+ if (!use_register) {
+do_retry:
+ status = i40e_aq_rx_ctl_read_register(hw, reg_addr, &val, NULL);
+ if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) {
+ i40e_msec_delay(1);
+ retry--;
+ goto do_retry;
+ }
+ }
+
+ /* if the AQ access failed, try the old-fashioned way */
+ if (status || use_register)
+ val = rd32(hw, reg_addr);
+
+ return val;
+}
+
+/**
+ * i40e_aq_rx_ctl_write_register
+ * @hw: pointer to the hw struct
+ * @reg_addr: register address
+ * @reg_val: register value
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Use the firmware to write to an Rx control register,
+ * especially useful if the Rx unit is under heavy pressure
+ **/
+enum i40e_status_code i40e_aq_rx_ctl_write_register(struct i40e_hw *hw,
+ u32 reg_addr, u32 reg_val,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aqc_rx_ctl_reg_read_write *cmd =
+ (struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw;
+ enum i40e_status_code status;
+
+ i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_rx_ctl_reg_write);
+
+ cmd->address = CPU_TO_LE32(reg_addr);
+ cmd->value = CPU_TO_LE32(reg_val);
+
+ status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+ return status;
+}
+
+/**
+ * i40e_write_rx_ctl - write to an Rx control register
+ * @hw: pointer to the hw struct
+ * @reg_addr: register address
+ * @reg_val: register value
+ **/
+void i40e_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val)
+{
+ enum i40e_status_code status = I40E_SUCCESS;
+ bool use_register;
+ int retry = 5;
+
+ use_register = (hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver < 5);
+ if (!use_register) {
+do_retry:
+ status = i40e_aq_rx_ctl_write_register(hw, reg_addr,
+ reg_val, NULL);
+ if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) {
+ i40e_msec_delay(1);
+ retry--;
+ goto do_retry;
+ }
+ }
+
+ /* if the AQ access failed, try the old-fashioned way */
+ if (status || use_register)
+ wr32(hw, reg_addr, reg_val);
+}
#ifdef VF_DRIVER
/**
@@ -117,6 +117,42 @@ do { \
##__VA_ARGS__); \
} while (0)
+/* AQ commands based interfaces of i40e_read_rx_ctl() and i40e_write_rx_ctl()
+ * are required for reading/writing below registers, as reading/writing it
+ * directly may not function correctly if the device is under heavy small
+ * packet traffic. Note that those interfaces are available from FVL5 and not
+ * suitable before the AdminQ is ready during initialization.
+ *
+ * I40E_PFQF_CTL_0
+ * I40E_PFQF_HENA
+ * I40E_PFQF_FDALLOC
+ * I40E_PFQF_HREGION
+ * I40E_PFLAN_QALLOC
+ * I40E_VPQF_CTL
+ * I40E_VFQF_HENA
+ * I40E_VFQF_HREGION
+ * I40E_VSIQF_CTL
+ * I40E_VSILAN_QBASE
+ * I40E_VSILAN_QTABLE
+ * I40E_VSIQF_TCREGION
+ * I40E_PFQF_HKEY
+ * I40E_VFQF_HKEY
+ * I40E_PRTQF_CTL_0
+ * I40E_GLFCOE_RCTL
+ * I40E_GLFCOE_RSOF
+ * I40E_GLQF_CTL
+ * I40E_GLQF_SWAP
+ * I40E_GLQF_HASH_MSK
+ * I40E_GLQF_HASH_INSET
+ * I40E_GLQF_HSYM
+ * I40E_GLQF_FC_MSK
+ * I40E_GLQF_FC_INSET
+ * I40E_GLQF_FD_MSK
+ * I40E_PRTQF_FD_INSET
+ * I40E_PRTQF_FD_FLXINSET
+ * I40E_PRTQF_FD_MSK
+ */
+
#define I40E_PCI_REG(reg) (*((volatile uint32_t *)(reg)))
#define I40E_PCI_REG_ADDR(a, reg) \
((volatile uint32_t *)((char *)(a)->hw_addr + (reg)))
@@ -516,6 +516,14 @@ enum i40e_status_code i40e_aq_debug_dump(struct i40e_hw *hw, u8 cluster_id,
struct i40e_asq_cmd_details *cmd_details);
void i40e_add_filter_to_drop_tx_flow_control_frames(struct i40e_hw *hw,
u16 vsi_seid);
+enum i40e_status_code i40e_aq_rx_ctl_read_register(struct i40e_hw *hw,
+ u32 reg_addr, u32 *reg_val,
+ struct i40e_asq_cmd_details *cmd_details);
+u32 i40e_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr);
+enum i40e_status_code i40e_aq_rx_ctl_write_register(struct i40e_hw *hw,
+ u32 reg_addr, u32 reg_val,
+ struct i40e_asq_cmd_details *cmd_details);
+void i40e_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val);
#ifdef X722_SUPPORT
enum i40e_status_code i40e_aq_set_arp_proxy_config(struct i40e_hw *hw,
struct i40e_aqc_arp_proxy_data *proxy_config,