[dpdk-dev] ixgbe: fix x550 flow director issue

Message ID 1434347966-29668-1-git-send-email-wenzhuo.lu@intel.com (mailing list archive)
State Accepted, archived
Headers

Commit Message

Wenzhuo Lu June 15, 2015, 5:59 a.m. UTC
  On x550, flow director doesn't support other IP packets directly.
If we want to monitor IP other packets, the L4 protocol and ports must
be masked. It means, on x550, if we want to add a flow director filter
for other IP packets, a flow director mask must have been configed to
mask L4 protocol and ports.

Return err when the user try to config a flow director filter for other
IP packets without flow director mask configed before. And print err log
for it.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
 drivers/net/ixgbe/ixgbe_fdir.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)
  

Comments

Jingjing Wu June 15, 2015, 7:19 a.m. UTC | #1
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> Sent: Monday, June 15, 2015 1:59 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH] ixgbe: fix x550 flow director issue
> 
> On x550, flow director doesn't support other IP packets directly.
> If we want to monitor IP other packets, the L4 protocol and ports must be
> masked. It means, on x550, if we want to add a flow director filter for other
> IP packets, a flow director mask must have been configed to mask L4
> protocol and ports.
> 
> Return err when the user try to config a flow director filter for other IP
> packets without flow director mask configed before. And print err log for it.
> 
> Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
> ---
>  drivers/net/ixgbe/ixgbe_fdir.c | 24 +++++++++++++++++++++++-
>  1 file changed, 23 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ixgbe/ixgbe_fdir.c b/drivers/net/ixgbe/ixgbe_fdir.c
> index db48817..40824ba 100644
> --- a/drivers/net/ixgbe/ixgbe_fdir.c
> +++ b/drivers/net/ixgbe/ixgbe_fdir.c
> @@ -334,9 +334,10 @@ fdir_set_input_mask_82599(struct rte_eth_dev
> *dev,
>  	fdirtcpm = reverse_fdir_bitmasks(input_mask->dst_port_mask,
>  					 input_mask->src_port_mask);
> 
> -	/* write both the same so that UDP and TCP use the same mask */
> +	/* write all the same so that UDP, TCP and SCTP use the same mask
> */
>  	IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
>  	IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
> +	IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
>  	info->mask.src_port_mask = input_mask->src_port_mask;
>  	info->mask.dst_port_mask = input_mask->dst_port_mask;
> 
> @@ -899,10 +900,31 @@ ixgbe_add_del_fdir_filter(struct rte_eth_dev *dev,
>  	uint8_t queue;
>  	bool is_perfect = FALSE;
>  	int err;
> +	struct ixgbe_hw_fdir_info *info =
> +			IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data-
> >dev_private);
> 
>  	if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_NONE)
>  		return -ENOTSUP;
> 
> +	/*
> +	 * Sanity check for x550.
> +	 * When adding a new filter with flow type set to IPv4-other,
> +	 * the flow director mask should be configed before,
> +	 * and the L4 protocol and ports are masked.
> +	 */
> +	if ((!del) &&
> +	    (hw->mac.type == ixgbe_mac_X550 ||
> +	     hw->mac.type == ixgbe_mac_X550EM_x) &&
> +	    (fdir_filter->input.flow_type ==
> +	       RTE_ETH_FLOW_NONFRAG_IPV4_OTHER) &&
> +	    (info->mask.src_port_mask != 0 ||
> +	     info->mask.dst_port_mask != 0)) {
> +		PMD_DRV_LOG(ERR, "By this device,"
> +				 " IPv4-other is not supported without"
> +				 " L4 protocol and ports masked!");
> +		return -ENOTSUP;
> +	}
> +
>  	if (dev->data->dev_conf.fdir_conf.mode ==
> RTE_FDIR_MODE_PERFECT)
>  		is_perfect = TRUE;
> 
> --
> 1.9.3
  
Thomas Monjalon June 15, 2015, 8:59 p.m. UTC | #2
> > On x550, flow director doesn't support other IP packets directly.
> > If we want to monitor IP other packets, the L4 protocol and ports must be
> > masked. It means, on x550, if we want to add a flow director filter for other
> > IP packets, a flow director mask must have been configed to mask L4
> > protocol and ports.
> > 
> > Return err when the user try to config a flow director filter for other IP
> > packets without flow director mask configed before. And print err log for it.
> > 
> > Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
> 
> Acked-by: Jingjing Wu <jingjing.wu@intel.com>

Applied, thanks
  

Patch

diff --git a/drivers/net/ixgbe/ixgbe_fdir.c b/drivers/net/ixgbe/ixgbe_fdir.c
index db48817..40824ba 100644
--- a/drivers/net/ixgbe/ixgbe_fdir.c
+++ b/drivers/net/ixgbe/ixgbe_fdir.c
@@ -334,9 +334,10 @@  fdir_set_input_mask_82599(struct rte_eth_dev *dev,
 	fdirtcpm = reverse_fdir_bitmasks(input_mask->dst_port_mask,
 					 input_mask->src_port_mask);
 
-	/* write both the same so that UDP and TCP use the same mask */
+	/* write all the same so that UDP, TCP and SCTP use the same mask */
 	IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
 	IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
 	info->mask.src_port_mask = input_mask->src_port_mask;
 	info->mask.dst_port_mask = input_mask->dst_port_mask;
 
@@ -899,10 +900,31 @@  ixgbe_add_del_fdir_filter(struct rte_eth_dev *dev,
 	uint8_t queue;
 	bool is_perfect = FALSE;
 	int err;
+	struct ixgbe_hw_fdir_info *info =
+			IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data->dev_private);
 
 	if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_NONE)
 		return -ENOTSUP;
 
+	/*
+	 * Sanity check for x550.
+	 * When adding a new filter with flow type set to IPv4-other,
+	 * the flow director mask should be configed before,
+	 * and the L4 protocol and ports are masked.
+	 */
+	if ((!del) &&
+	    (hw->mac.type == ixgbe_mac_X550 ||
+	     hw->mac.type == ixgbe_mac_X550EM_x) &&
+	    (fdir_filter->input.flow_type ==
+	       RTE_ETH_FLOW_NONFRAG_IPV4_OTHER) &&
+	    (info->mask.src_port_mask != 0 ||
+	     info->mask.dst_port_mask != 0)) {
+		PMD_DRV_LOG(ERR, "By this device,"
+				 " IPv4-other is not supported without"
+				 " L4 protocol and ports masked!");
+		return -ENOTSUP;
+	}
+
 	if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_PERFECT)
 		is_perfect = TRUE;