diff mbox

[dpdk-dev,1/3] pci: allow access to PCI config space

Message ID 1430948228-1426-2-git-send-email-stephen@networkplumber.org (mailing list archive)
State Superseded, archived
Headers

Commit Message

Stephen Hemminger May 6, 2015, 9:37 p.m. UTC 
  From: Stephen Hemminger <shemming@brocade.com>

Some drivers need ability to access PCI config (for example for power
management). This adds an abstraction to do this; only implemented
on Linux, but should be possible on BSD.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_eal/common/include/rte_pci.h    | 28 +++++++++++++++++
 lib/librte_eal/linuxapp/eal/eal_pci.c      | 48 ++++++++++++++++++++++++++++++
 lib/librte_eal/linuxapp/eal/eal_pci_init.h | 11 +++++++
 lib/librte_eal/linuxapp/eal/eal_pci_uio.c  | 14 +++++++++
 lib/librte_eal/linuxapp/eal/eal_pci_vfio.c | 16 ++++++++++
 5 files changed, 117 insertions(+)

Comments

Neil Horman May 7, 2015, 10:35 a.m. UTC | #1 
On Wed, May 06, 2015 at 02:37:06PM -0700, Stephen Hemminger wrote:
> From: Stephen Hemminger <shemming@brocade.com>
> 
> Some drivers need ability to access PCI config (for example for power
> management). This adds an abstraction to do this; only implemented
> on Linux, but should be possible on BSD.
> 
You didn't test this with shared libraries.  Not having added these new symbols
to the version map will cause a build break.  Also I think you need to implement
this on BSD, its not ok to just have bnx2x break on non-linux platforms.

Thanks
Neil
diff mbox

Patch

diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
index 223d3cd..cea982a 100644
--- a/lib/librte_eal/common/include/rte_pci.h
+++ b/lib/librte_eal/common/include/rte_pci.h
@@ -393,6 +393,34 @@  void rte_eal_pci_register(struct rte_pci_driver *driver);
  */
 void rte_eal_pci_unregister(struct rte_pci_driver *driver);
 
+/**
+ * Read PCI config space.
+ *
+ * @param device
+ *   A pointer to a rte_pci_device structure describing the device
+ *   to use
+ * @param buf
+ *   A data buffer where the bytes should be read into
+ * @param size
+ *   The length of the data buffer.
+ */
+int rte_eal_pci_read_config(const struct rte_pci_device *device,
+			    void *buf, size_t len, off_t offset);
+
+/**
+ * Write PCI config space.
+ *
+ * @param device
+ *   A pointer to a rte_pci_device structure describing the device
+ *   to use
+ * @param buf
+ *   A data buffer containing the bytes should be written
+ * @param size
+ *   The length of the data buffer.
+ */
+int rte_eal_pci_write_config(const struct rte_pci_device *device,
+			     const void *buf, size_t len, off_t offset);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index d2adc66..6d79a08 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -756,6 +756,54 @@  rte_eal_pci_close_one_driver(struct rte_pci_driver *dr __rte_unused,
 }
 #endif /* RTE_LIBRTE_EAL_HOTPLUG */
 
+/* Read PCI config space. */
+int rte_eal_pci_read_config(const struct rte_pci_device *device,
+			    void *buf, size_t len, off_t offset)
+{
+	const struct rte_intr_handle *intr_handle = &device->intr_handle;
+
+	switch (intr_handle->type) {
+	case RTE_INTR_HANDLE_UIO:
+		return pci_uio_read_config(intr_handle, buf, len, offset);
+
+#ifdef VFIO_PRESENT
+	case RTE_INTR_HANDLE_VFIO_MSIX:
+	case RTE_INTR_HANDLE_VFIO_MSI:
+	case RTE_INTR_HANDLE_VFIO_LEGACY:
+		return pci_vfio_read_config(intr_handle, buf, len, offset);
+#endif
+	default:
+		RTE_LOG(ERR, EAL,
+			"Unknown handle type of fd %d\n",
+					intr_handle->fd);
+		return -1;
+	}
+}
+
+/* Write PCI config space. */
+int rte_eal_pci_write_config(const struct rte_pci_device *device,
+			     const void *buf, size_t len, off_t offset)
+{
+	const struct rte_intr_handle *intr_handle = &device->intr_handle;
+
+	switch (intr_handle->type) {
+	case RTE_INTR_HANDLE_UIO:
+		return pci_uio_write_config(intr_handle, buf, len, offset);
+
+#ifdef VFIO_PRESENT
+	case RTE_INTR_HANDLE_VFIO_MSIX:
+	case RTE_INTR_HANDLE_VFIO_MSI:
+	case RTE_INTR_HANDLE_VFIO_LEGACY:
+		return pci_vfio_write_config(intr_handle, buf, len, offset);
+#endif
+	default:
+		RTE_LOG(ERR, EAL,
+			"Unknown handle type of fd %d\n",
+					intr_handle->fd);
+		return -1;
+	}
+}
+
 /* Init the PCI EAL subsystem */
 int
 rte_eal_pci_init(void)
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_init.h b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
index aa7b755..c28e5b0 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_init.h
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
@@ -68,6 +68,11 @@  void *pci_find_max_end_va(void);
 void *pci_map_resource(void *requested_addr, int fd, off_t offset,
 	       size_t size, int additional_flags);
 
+int pci_uio_read_config(const struct rte_intr_handle *intr_handle,
+			void *buf, size_t len, off_t offs);
+int pci_uio_write_config(const struct rte_intr_handle *intr_handle,
+			 const void *buf, size_t len, off_t offs);
+
 /* map IGB_UIO resource prototype */
 int pci_uio_map_resource(struct rte_pci_device *dev);
 
@@ -86,6 +91,12 @@  int pci_vfio_enable(void);
 int pci_vfio_is_enabled(void);
 int pci_vfio_mp_sync_setup(void);
 
+/* access config space */
+int pci_vfio_read_config(const struct rte_intr_handle *intr_handle,
+			 void *buf, size_t len, off_t offs);
+int pci_vfio_write_config(const struct rte_intr_handle *intr_handle,
+			  const void *buf, size_t len, off_t offs);
+
 /* map VFIO resource prototype */
 int pci_vfio_map_resource(struct rte_pci_device *dev);
 int pci_vfio_get_group_fd(int iommu_group_fd);
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
index 2d1c69b..bbc59ed 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
@@ -58,6 +58,20 @@  EAL_REGISTER_TAILQ(rte_uio_tailq)
 
 #define OFF_MAX              ((uint64_t)(off_t)-1)
 
+int
+pci_uio_read_config(const struct rte_intr_handle *intr_handle,
+		    void *buf, size_t len, off_t offset)
+{
+	return pread(intr_handle->uio_cfg_fd, buf, len, offset);
+}
+
+int
+pci_uio_write_config(const struct rte_intr_handle *intr_handle,
+		     const void *buf, size_t len, off_t offset)
+{
+	return pwrite(intr_handle->uio_cfg_fd, buf, len, offset);
+}
+
 static int
 pci_uio_set_bus_master(int dev_fd)
 {
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
index aea1fb1..092a369 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
@@ -77,6 +77,22 @@  EAL_REGISTER_TAILQ(rte_vfio_tailq)
 /* per-process VFIO config */
 static struct vfio_config vfio_cfg;
 
+int
+pci_vfio_read_config(const struct rte_intr_handle *intr_handle,
+		    void *buf, size_t len, off_t offs)
+{
+	return pread64(intr_handle->vfio_dev_fd, buf, len,
+	       VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + offs);
+}
+
+int
+pci_vfio_write_config(const struct rte_intr_handle *intr_handle,
+		    const void *buf, size_t len, off_t offs)
+{
+	return pwrite64(intr_handle->vfio_dev_fd, buf, len,
+	       VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + offs);
+}
+
 /* get PCI BAR number where MSI-X interrupts are */
 static int
 pci_vfio_get_msix_bar(int fd, int *msix_bar, uint32_t *msix_table_offset,