diff mbox

[dpdk-dev,v7,07/10] ethdev: add rx intr enable, disable and ctl functions

Message ID 1430804386-28949-8-git-send-email-cunming.liang@intel.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Cunming Liang May 5, 2015, 5:39 a.m. UTC
The patch adds two dev_ops functions to enable and disable rx queue interrupts.
In addtion, it adds rte_eth_dev_rx_intr_ctl/rx_intr_q to support per port or per queue rx intr event set.

Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
---
v7 changes
 - remove rx_intr_vec_get
 - add rx_intr_ctl and rx_intr_ctl_q

v6 changes
 - add rx_intr_vec_get to retrieve the vector num of the queue.

v5 changes
 - Rebase the patchset onto the HEAD

v4 changes
 - Export interrupt enable/disable functions for shared libraries
 - Put new functions at the end of eth_dev_ops to avoid breaking ABI

v3 changes
 - Add return value for interrupt enable/disable functions

 lib/librte_ether/rte_ethdev.c          | 132 +++++++++++++++++++++++++++++++++
 lib/librte_ether/rte_ethdev.h          | 104 ++++++++++++++++++++++++++
 lib/librte_ether/rte_ether_version.map |   4 +
 3 files changed, 240 insertions(+)
diff mbox

Patch

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 024fe8b..cdde14c 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -3281,6 +3281,138 @@  _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
 	}
 	rte_spinlock_unlock(&rte_eth_dev_cb_lock);
 }
+
+int
+rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data)
+{
+	uint32_t vec;
+	struct rte_eth_dev *dev;
+	struct rte_intr_handle *intr_handle;
+	uint16_t qid;
+	int rc;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	if (dev == NULL) {
+		PMD_DEBUG_TRACE("Invalid port device\n");
+		return -ENODEV;
+	}
+
+	intr_handle = &dev->pci_dev->intr_handle;
+	if (!intr_handle->intr_vec) {
+		PMD_DEBUG_TRACE("RX Intr vector unset\n");
+		return -EPERM;
+	}
+
+	for (qid = 0; qid < dev->data->nb_rx_queues; qid++) {
+		if (intr_handle->intr_vec[qid] < 0) {
+			PMD_DEBUG_TRACE("RX Intr vector invalid on %d\n", qid);
+			continue;
+		}
+
+		vec = intr_handle->intr_vec[qid];
+		rc = rte_intr_rx_ctl(intr_handle, epfd, op, vec,
+				     data, rte_eth_dev_socket_id(port_id));
+		if (rc) {
+			PMD_DEBUG_TRACE("p %d q %d rx ctl error"
+					" op %d epfd %d vec %u\n",
+					port_id, qid, op, epfd, vec);
+		}
+	}
+
+	return 0;
+}
+
+int
+rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
+			  int epfd, int op, void *data)
+{
+	uint32_t vec;
+	struct rte_eth_dev *dev;
+	struct rte_intr_handle *intr_handle;
+	int rc;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	if (dev == NULL) {
+		PMD_DEBUG_TRACE("Invalid port device\n");
+		return -ENODEV;
+	}
+
+	if (queue_id >= dev->data->nb_rx_queues) {
+		PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", rx_queue_id);
+		return -EINVAL;
+	}
+
+	intr_handle = &dev->pci_dev->intr_handle;
+	if (!intr_handle->intr_vec || intr_handle->intr_vec[queue_id] < 0) {
+		PMD_DEBUG_TRACE("RX Intr vector unset on %d\n", rx_queue_id);
+		return -EPERM;
+	}
+
+	vec = intr_handle->intr_vec[queue_id];
+	rc = rte_intr_rx_ctl(intr_handle, epfd, op, vec,
+			     data, rte_eth_dev_socket_id(port_id));
+	if (rc) {
+		PMD_DEBUG_TRACE("p %d q %d rx ctl error"
+				" op %d epfd %d vec %u\n",
+				port_id, queue_id, op, epfd, vec);
+		return rc;
+	}
+
+	return 0;
+}
+
+int
+rte_eth_dev_rx_intr_enable(uint8_t port_id,
+			   uint16_t queue_id)
+{
+	struct rte_eth_dev *dev;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	if (dev == NULL) {
+		PMD_DEBUG_TRACE("Invalid port device\n");
+		return -ENODEV;
+	}
+
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_enable, -ENOTSUP);
+	return (*dev->dev_ops->rx_queue_intr_enable)(dev, queue_id);
+}
+
+int
+rte_eth_dev_rx_intr_disable(uint8_t port_id,
+			    uint16_t queue_id)
+{
+	struct rte_eth_dev *dev;
+
+	if (!rte_eth_dev_is_valid_port(port_id)) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[port_id];
+	if (dev == NULL) {
+		PMD_DEBUG_TRACE("Invalid port device\n");
+		return -ENODEV;
+	}
+
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_disable, -ENOTSUP);
+	return (*dev->dev_ops->rx_queue_intr_disable)(dev, queue_id);
+}
+
 #ifdef RTE_NIC_BYPASS
 int rte_eth_dev_bypass_init(uint8_t port_id)
 {
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 4648290..e5efec0 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -829,6 +829,8 @@  struct rte_eth_fdir {
 struct rte_intr_conf {
 	/** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
 	uint16_t lsc;
+	/** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */
+	uint16_t rxq;
 };
 
 /**
@@ -1034,6 +1036,14 @@  typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev *dev,
 				    const struct rte_eth_txconf *tx_conf);
 /**< @internal Setup a transmit queue of an Ethernet device. */
 
+typedef int (*eth_rx_enable_intr_t)(struct rte_eth_dev *dev,
+				    uint16_t rx_queue_id);
+/**< @internal Enable interrupt of a receive queue of an Ethernet device. */
+
+typedef int (*eth_rx_disable_intr_t)(struct rte_eth_dev *dev,
+				    uint16_t rx_queue_id);
+/**< @internal Disable interrupt of a receive queue of an Ethernet device. */
+
 typedef void (*eth_queue_release_t)(void *queue);
 /**< @internal Release memory resources allocated by given RX/TX queue. */
 
@@ -1385,6 +1395,10 @@  struct eth_dev_ops {
 	/** Get current RSS hash configuration. */
 	rss_hash_conf_get_t rss_hash_conf_get;
 	eth_filter_ctrl_t              filter_ctrl;          /**< common filter control*/
+
+	/** Enable/disable Rx queue interrupt. */
+	eth_rx_enable_intr_t       rx_queue_intr_enable; /**< Enable Rx queue interrupt. */
+	eth_rx_disable_intr_t      rx_queue_intr_disable; /**< Disable Rx queue interrupt.*/
 };
 
 /**
@@ -2867,6 +2881,96 @@  void _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
 				enum rte_eth_event_type event);
 
 /**
+ * When there is no rx packet coming in Rx Queue for a long time, we can
+ * sleep lcore related to RX Queue for power saving, and enable rx interrupt
+ * to be triggered when rx packect arrives.
+ *
+ * The rte_eth_dev_rx_intr_enable() function enables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the receive queue from which to retrieve input packets.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ *     that operation.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_intr_enable(uint8_t port_id,
+			       uint16_t queue_id);
+
+/**
+ * When lcore wakes up from rx interrupt indicating packet coming, disable rx
+ * interrupt and returns to polling mode.
+ *
+ * The rte_eth_dev_rx_intr_disable() function disables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the receive queue from which to retrieve input packets.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ *     that operation.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_intr_disable(uint8_t port_id,
+				uint16_t queue_id);
+
+/**
+ * RX Interrupt control per port.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param epfd
+ *   Epoll instance fd which the intr vector associated to.
+ *   Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ *   The operation be performed for the vector.
+ *   Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ *   User raw data.
+ * @return
+ *   - On success, zero.
+ *   - On failure, a negative value.
+ */
+int
+rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data);
+
+/**
+ * RX Interrupt control per queue.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param queue_id
+ *   The index of the receive queue from which to retrieve input packets.
+ *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ *   to rte_eth_dev_configure().
+ * @param epfd
+ *   Epoll instance fd which the intr vector associated to.
+ *   Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ *   The operation be performed for the vector.
+ *   Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ *   User raw data.
+ * @return
+ *   - On success, zero.
+ *   - On failure, a negative value.
+ */
+int
+rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
+			  int epfd, int op, void *data);
+
+/**
  * Turn on the LED on the Ethernet device.
  * This function turns on the LED on the Ethernet device.
  *
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index a2d25a6..2799b99 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -48,6 +48,10 @@  DPDK_2.0 {
 	rte_eth_dev_rss_hash_update;
 	rte_eth_dev_rss_reta_query;
 	rte_eth_dev_rss_reta_update;
+	rte_eth_dev_rx_intr_ctl;
+	rte_eth_dev_rx_intr_ctl_q;
+	rte_eth_dev_rx_intr_disable;
+	rte_eth_dev_rx_intr_enable;
 	rte_eth_dev_rx_queue_start;
 	rte_eth_dev_rx_queue_stop;
 	rte_eth_dev_set_link_down;