@@ -208,7 +208,6 @@ CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
-CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1
#
# Compile burst-oriented Cisco ENIC PMD driver
@@ -205,7 +205,6 @@ CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
-CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1
#
# Compile burst-oriented Cisco ENIC PMD driver
@@ -125,11 +125,6 @@ Compilation options
Toggle software counters. No counters are available if this option is
disabled since hardware counters are not supported.
-- ``CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE`` (default **1**)
-
- Toggle VMware compatibility code. It also requires the environment
- variable ``MLX4_COMPAT_VMWARE`` set to a nonzero value at runtime.
-
Environment variables
~~~~~~~~~~~~~~~~~~~~~
@@ -139,12 +134,6 @@ Environment variables
significantly improve performance in some cases but lower it in
others. Requires careful testing.
-- ``MLX4_COMPAT_VMWARE``
-
- Only supported when compiled with
- ``CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1``. Adds workarounds to run in
- VMware systems that do not support the flows API properly.
-
Run-time configuration
~~~~~~~~~~~~~~~~~~~~~~
@@ -87,10 +87,6 @@ ifdef CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS
CFLAGS += -DMLX4_PMD_SOFT_COUNTERS=$(CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS)
endif
-ifdef CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE
-CFLAGS += -DMLX4_PMD_COMPAT_VMWARE=$(CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE)
-endif
-
include $(RTE_SDK)/mk/rte.lib.mk
# Generate and clean-up mlx4_autoconf.h.
@@ -278,9 +278,6 @@ struct priv {
unsigned int hw_tss:1; /* TSS is supported. */
unsigned int hw_rss:1; /* RSS is supported. */
unsigned int rss:1; /* RSS is enabled. */
-#ifdef MLX4_COMPAT_VMWARE
- unsigned int vmware:1; /* Use VMware compatibility. */
-#endif
unsigned int vf:1; /* This is a VF device. */
#ifdef INLINE_RECV
unsigned int inl_recv_size; /* Inline recv size */
@@ -1825,7 +1822,7 @@ rxq_free_elts(struct rxq *rxq)
static void
rxq_mac_addr_del(struct rxq *rxq, unsigned int mac_index)
{
-#if defined(NDEBUG) || defined(MLX4_COMPAT_VMWARE)
+#ifndef NDEBUG
struct priv *priv = rxq->priv;
const uint8_t (*mac)[ETHER_ADDR_LEN] =
(const uint8_t (*)[ETHER_ADDR_LEN])
@@ -1842,16 +1839,6 @@ rxq_mac_addr_del(struct rxq *rxq, unsigned int mac_index)
(void *)rxq,
(*mac)[0], (*mac)[1], (*mac)[2], (*mac)[3], (*mac)[4], (*mac)[5],
mac_index);
-#ifdef MLX4_COMPAT_VMWARE
- if (priv->vmware) {
- union ibv_gid gid = { .raw = { 0 } };
-
- memcpy(&gid.raw[10], *mac, sizeof(*mac));
- claim_zero(ibv_detach_mcast(rxq->qp, &gid, 0));
- BITFIELD_RESET(rxq->mac_configured, mac_index);
- return;
- }
-#endif
assert(rxq->mac_flow[mac_index] != NULL);
claim_zero(ibv_exp_destroy_flow(rxq->mac_flow[mac_index]));
rxq->mac_flow[mac_index] = NULL;
@@ -1960,22 +1947,6 @@ rxq_mac_addr_add(struct rxq *rxq, unsigned int mac_index)
(*mac)[0], (*mac)[1], (*mac)[2], (*mac)[3], (*mac)[4], (*mac)[5],
mac_index,
vlans);
-#ifdef MLX4_COMPAT_VMWARE
- if (priv->vmware) {
- union ibv_gid gid = { .raw = { 0 } };
-
- /* Call multicast attach with unicast mac to get traffic. */
- memcpy(&gid.raw[10], *mac, sizeof(*mac));
- errno = 0;
- if (ibv_attach_mcast(rxq->qp, &gid, 0)) {
- if (errno)
- return errno;
- return EINVAL;
- }
- BITFIELD_SET(rxq->mac_configured, mac_index);
- return 0;
- }
-#endif
/* Create related flow. */
errno = 0;
flow = ibv_exp_create_flow(rxq->qp, attr);
@@ -2173,13 +2144,6 @@ rxq_allmulticast_enable(struct rxq *rxq)
.flags = 0
};
-#ifdef MLX4_COMPAT_VMWARE
- if (rxq->priv->vmware) {
- ERROR("%p: allmulticast mode is not supported in VMware",
- (void *)rxq);
- return EINVAL;
- }
-#endif
DEBUG("%p: enabling allmulticast mode", (void *)rxq);
if (rxq->allmulti_flow != NULL)
return EBUSY;
@@ -2208,13 +2172,6 @@ rxq_allmulticast_enable(struct rxq *rxq)
static void
rxq_allmulticast_disable(struct rxq *rxq)
{
-#ifdef MLX4_COMPAT_VMWARE
- if (rxq->priv->vmware) {
- ERROR("%p: allmulticast mode is not supported in VMware",
- (void *)rxq);
- return;
- }
-#endif
DEBUG("%p: disabling allmulticast mode", (void *)rxq);
if (rxq->allmulti_flow == NULL)
return;
@@ -2243,13 +2200,6 @@ rxq_promiscuous_enable(struct rxq *rxq)
.flags = 0
};
-#ifdef MLX4_COMPAT_VMWARE
- if (rxq->priv->vmware) {
- ERROR("%p: promiscuous mode is not supported in VMware",
- (void *)rxq);
- return EINVAL;
- }
-#endif
if (rxq->priv->vf)
return 0;
DEBUG("%p: enabling promiscuous mode", (void *)rxq);
@@ -2280,13 +2230,6 @@ rxq_promiscuous_enable(struct rxq *rxq)
static void
rxq_promiscuous_disable(struct rxq *rxq)
{
-#ifdef MLX4_COMPAT_VMWARE
- if (rxq->priv->vmware) {
- ERROR("%p: promiscuous mode is not supported in VMware",
- (void *)rxq);
- return;
- }
-#endif
if (rxq->priv->vf)
return;
DEBUG("%p: disabling promiscuous mode", (void *)rxq);
@@ -4594,12 +4537,7 @@ mlx4_pci_devinit(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
}
#endif /* INLINE_RECV */
-#ifdef MLX4_COMPAT_VMWARE
- if (mlx4_getenv_int("MLX4_COMPAT_VMWARE"))
- priv->vmware = 1;
-#else /* MLX4_COMPAT_VMWARE */
(void)mlx4_getenv_int;
-#endif /* MLX4_COMPAT_VMWARE */
priv->vf = vf;
if (ibv_query_gid(ctx, port, 0, &temp_gid)) {
ERROR("ibv_query_gid() failure");
@@ -80,14 +80,6 @@
#define MLX4_PMD_SOFT_COUNTERS 1
#endif
-/*
- * If defined, enable VMware compatibility code. It also requires the
- * environment variable MLX4_COMPAT_VMWARE set to a nonzero value at runtime.
- */
-#ifndef MLX4_COMPAT_VMWARE
-#define MLX4_COMPAT_VMWARE 1
-#endif
-
enum {
PCI_VENDOR_ID_MELLANOX = 0x15b3,
};