[dpdk-dev] doc: commands changed in testpmd_funcs for ethertype filter

new commands for ethertype filter
      - ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr)
        (mac_address) ethertype (ether_type) (drop|fwd) queue (queue_id)

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 46 +++++++----------------------
 1 file changed, 11 insertions(+), 35 deletions(-)

Hi Jingjing,

Thanks for providing a patch quickly for the missing doc.
I have a few comments.

2015-01-21 16:30, Jingjing Wu:
> new commands for ethertype filter
>       - ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr)
>         (mac_address) ethertype (ether_type) (drop|fwd) queue (queue_id)
> 
> Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
> ---
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst | 46 +++++++----------------------
>  1 file changed, 11 insertions(+), 35 deletions(-)
> 
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index be935c2..61a7f6d 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -1397,56 +1397,32 @@ add_ethertype_filter
>  
>  Add a L2 Ethertype filter, which identify packets by their L2 Ethertype mainly assign them to a receive queue.
>  
> -add_ethertype_filter (port_id) ethertype (eth_value) priority (enable|disable) (pri_value) queue (queue_id) index (idx)
> +ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr) (mac_address) ethertype (ether_type) (drop|fwd) queue (queue_id)
>  
>  The available information parameters are:
>  
>  *   port_id:  the port which the Ethertype filter assigned on.
>  
> -*   eth_value: the EtherType value want to match,
> -    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
> -
> -*   enable: user priority participates in the match.
> -
> -*   disable: user priority doesn't participate in the match.
> -
> -*   pri_value: user priority value that want to match.
> -
> -*   queue_id : The receive queue associated with this EtherType filter
> +*   mac_addr: need compare destination mac address.

is "need" needed? ;)
mac_addr: compare destination mac address.

>  
> -*   index: the index of this EtherType filter
> -
> -Example:
> -
> -.. code-block:: console
> +*   mac_ignr: ignore destination mac address match.
>  
> -    testpmd> add_ethertype_filter 0 ethertype 0x0806 priority disable 0 queue 3 index 0
> -    Assign ARP packet to receive queue 3
> +*   mac_address: destination mac address need to match.

again, I would remove "need"
mac_address: destination mac address to match.

>  
> -remove_ethertype_filter
> -~~~~~~~~~~~~~~~~~~~~~~~
> -
> -Remove a L2 Ethertype filter
> -
> -remove_ethertype_filter (port_id) index (idx)
> -
> -get_ethertype_filter
> -~~~~~~~~~~~~~~~~~~~~
> -
> -Get and display a L2 Ethertype filter
> +*   ether_type: the EtherType value want to match,
> +    for example 0x0806 for ARP packet. 0x0800 (IPv4) and 0x86DD (IPv6) are invalid.
>  
> -get_ethertype_filter (port_id) index (idx)
> +*   queue_id : The receive queue associated with this EtherType filter. It is meaningless when deleting or dropping.

Do you mean queue_id is optional?

>  
>  Example:
>  
>  .. code-block:: console
>  
> -    testpmd> get_ethertype_filter 0 index 0
> +    testpmd> ethertype_filter 0 add mac_ignr ethertype 0x0806 fwd queue 3
> +    add a rule to assign ARP packet to receive queue 3

You are adding a comment in the code-block. Not sure it is a good idea.

>  
> -    filter[0]:
> -        ethertype: 0x0806
> -        priority: disable, 0
> -        queue: 3
> +	testpmd> ethertype_filter 0 del mac_ignr ethertype 0x0806 fwd queue 3

The indent is strange here.

> +    delete the rule to assign ARP packet to receive queue 3
>  
>  add_2tuple_filter
>  ~~~~~~~~~~~~~~~~~
>