[dpdk-dev,2/2] testpmd: fix dcb in vt mode

  From: Pawel Wodkowski <pawelx.wodkowski@intel.com>

This patch incorporate fixes to support DCB in SRIOV mode for testpmd.
It also clean up some old code that is not needed or wrong.

Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
---
 app/test-pmd/cmdline.c |    4 ++--
 app/test-pmd/testpmd.c |   39 +++++++++++++++++++++++++++++----------
 app/test-pmd/testpmd.h |   10 ----------
 3 files changed, 31 insertions(+), 22 deletions(-)
  

On 01/12/15 17:50, Michal Jastrzebski wrote:
> From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
>
> This patch incorporate fixes to support DCB in SRIOV mode for testpmd.
> It also clean up some old code that is not needed or wrong.

The same here: could u, pls., separate the "cleanup" part of the patch 
from the "fixes" part into separate patches?

thanks,
vlad

>
> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
> ---
>   app/test-pmd/cmdline.c |    4 ++--
>   app/test-pmd/testpmd.c |   39 +++++++++++++++++++++++++++++----------
>   app/test-pmd/testpmd.h |   10 ----------
>   3 files changed, 31 insertions(+), 22 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index 882a5a2..3c60087 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -1947,9 +1947,9 @@ cmd_config_dcb_parsed(void *parsed_result,
>   
>   	/* DCB in VT mode */
>   	if (!strncmp(res->vt_en, "on",2))
> -		dcb_conf.dcb_mode = DCB_VT_ENABLED;
> +		dcb_conf.vt_en = 1;
>   	else
> -		dcb_conf.dcb_mode = DCB_ENABLED;
> +		dcb_conf.vt_en = 0;
>   
>   	if (!strncmp(res->pfc_en, "on",2)) {
>   		dcb_conf.pfc_en = 1;
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index 8c69756..6677a5e 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -1733,7 +1733,8 @@ const uint16_t vlan_tags[] = {
>   };
>   
>   static  int
> -get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
> +get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf,
> +	uint16_t sriov)
>   {
>           uint8_t i;
>   
> @@ -1741,7 +1742,7 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
>    	 * Builds up the correct configuration for dcb+vt based on the vlan tags array
>    	 * given above, and the number of traffic classes available for use.
>    	 */
> -	if (dcb_conf->dcb_mode == DCB_VT_ENABLED) {
> +	if (dcb_conf->vt_en == 1) {
>   		struct rte_eth_vmdq_dcb_conf vmdq_rx_conf;
>   		struct rte_eth_vmdq_dcb_tx_conf vmdq_tx_conf;
>   
> @@ -1758,9 +1759,17 @@ get_eth_dcb_conf(struct rte_eth_conf *eth_conf, struct dcb_config *dcb_conf)
>   			vmdq_rx_conf.pool_map[i].vlan_id = vlan_tags[ i ];
>   			vmdq_rx_conf.pool_map[i].pools = 1 << (i % vmdq_rx_conf.nb_queue_pools);
>   		}
> -		for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
> -			vmdq_rx_conf.dcb_queue[i] = i;
> -			vmdq_tx_conf.dcb_queue[i] = i;
> +
> +		if (sriov == 0) {
> +			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
> +				vmdq_rx_conf.dcb_queue[i] = i;
> +				vmdq_tx_conf.dcb_queue[i] = i;
> +			}
> +		} else {
> +			for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
> +				vmdq_rx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;
> +				vmdq_tx_conf.dcb_queue[i] = i % dcb_conf->num_tcs;
> +			}
>   		}
>   
>   		/*set DCB mode of RX and TX of multiple queues*/
> @@ -1818,22 +1827,32 @@ init_port_dcb_config(portid_t pid,struct dcb_config *dcb_conf)
>   	uint16_t nb_vlan;
>   	uint16_t i;
>   
> -	/* rxq and txq configuration in dcb mode */
> -	nb_rxq = 128;
> -	nb_txq = 128;
>   	rx_free_thresh = 64;
>   
> +	rte_port = &ports[pid];
>   	memset(&port_conf,0,sizeof(struct rte_eth_conf));
>   	/* Enter DCB configuration status */
>   	dcb_config = 1;
>   
>   	nb_vlan = sizeof( vlan_tags )/sizeof( vlan_tags[ 0 ]);
>   	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
> -	retval = get_eth_dcb_conf(&port_conf, dcb_conf);
> +	retval = get_eth_dcb_conf(&port_conf, dcb_conf, rte_port->dev_info.max_vfs);
> +
> +	/* rxq and txq configuration in dcb mode */
> +	nb_rxq = rte_port->dev_info.max_rx_queues;
> +	nb_txq = rte_port->dev_info.max_tx_queues;
> +
> +	if (rte_port->dev_info.max_vfs) {
> +		if (port_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)
> +			nb_rxq /= port_conf.rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;
> +
> +		if (port_conf.txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)
> +			nb_txq /= port_conf.tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;
> +	}
> +
>   	if (retval < 0)
>   		return retval;
>   
> -	rte_port = &ports[pid];
>   	memcpy(&rte_port->dev_conf, &port_conf,sizeof(struct rte_eth_conf));
>   
>   	rte_port->rx_conf.rx_thresh = rx_thresh;
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index f8b0740..8976acc 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -227,20 +227,10 @@ struct fwd_config {
>   	portid_t   nb_fwd_ports;    /**< Nb. of ports involved. */
>   };
>   
> -/**
> - * DCB mode enable
> - */
> -enum dcb_mode_enable
> -{
> -	DCB_VT_ENABLED,
> -	DCB_ENABLED
> -};
> -
>   /*
>    * DCB general config info
>    */
>   struct dcb_config {
> -	enum dcb_mode_enable dcb_mode;
>   	uint8_t vt_en;
>   	enum rte_eth_nb_tcs num_tcs;
>   	uint8_t pfc_en;
  

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Vlad Zolotarov
> Sent: Tuesday, January 13, 2015 11:16 AM
> To: Jastrzebski, MichalX K; dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 2/2] testpmd: fix dcb in vt mode
> 
> 
> On 01/12/15 17:50, Michal Jastrzebski wrote:
> > From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
> >
> > This patch incorporate fixes to support DCB in SRIOV mode for testpmd.
> > It also clean up some old code that is not needed or wrong.
> 
> The same here: could u, pls., separate the "cleanup" part of the patch
> from the "fixes" part into separate patches?
> 

Maybe little confusion I introduced by saying cleanups. Some code became
obsolete (like enum dcb_mode_enable) when I fixed DCV in VT mode, so
removing those parts I called "cleanups". Please consider them to be a fixes.

Pawel