diff mbox

[dpdk-dev,RFC,6/6] ixgbe: PMD for bifurc ixgbe net device

Message ID 1416924682-24170-7-git-send-email-cunming.liang@intel.com (mailing list archive)
State RFC, archived
Headers show

Commit Message

Cunming Liang Nov. 25, 2014, 2:11 p.m. UTC
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
---
 lib/librte_pmd_ixgbe/Makefile          |  13 +-
 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303 +++++++++++++++++++++++++++++++++
 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h |  57 +++++++
 lib/librte_pmd_ixgbe/ixgbe_rxtx.c      |  40 ++++-
 lib/librte_pmd_ixgbe/ixgbe_rxtx.h      |  10 ++
 5 files changed, 415 insertions(+), 8 deletions(-)
 create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
 create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h

Comments

Bruce Richardson Nov. 25, 2014, 2:34 p.m. UTC | #1
On Tue, Nov 25, 2014 at 10:11:22PM +0800, Cunming Liang wrote:
> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
> ---
>  lib/librte_pmd_ixgbe/Makefile          |  13 +-
>  lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303 +++++++++++++++++++++++++++++++++
>  lib/librte_pmd_ixgbe/ixgbe_bifurcate.h |  57 +++++++
>  lib/librte_pmd_ixgbe/ixgbe_rxtx.c      |  40 ++++-
>  lib/librte_pmd_ixgbe/ixgbe_rxtx.h      |  10 ++
>  5 files changed, 415 insertions(+), 8 deletions(-)
>  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
>  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> 

These changes are the ones that I'm not too sure about. I'd prefer if all
material for the bifurcated driver be kept within the librte_pmd_bifurc directory.
Is it possible to leave ixgbe largely unmodified and simply have the new
bifurcated driver pull in the needed ixgbe (and later i40e) functions at
compile time i.e. refer from one Makefile to the sources in the other
driver's directory?
My thinking is that the bifurcated driver is so significantly different in
the way it works, and the limits on it's functionality e.g. no direct filter
support or queue management, that it's best kept completely separate and only
"borrow" the needed descriptor read/write functions from the other drivers as is
needed.

Just my 2c. I'm curious as to what others think.

/Bruce

> diff --git a/lib/librte_pmd_ixgbe/Makefile b/lib/librte_pmd_ixgbe/Makefile
> index 3588047..6867f17 100644
> --- a/lib/librte_pmd_ixgbe/Makefile
> +++ b/lib/librte_pmd_ixgbe/Makefile
> @@ -37,7 +37,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>  LIB = librte_pmd_ixgbe.a
>  
>  CFLAGS += -O3
> -CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += $(WERROR_FLAGS) -Wno-cast-qual
>  
>  ifeq ($(CC), icc)
>  #
> @@ -108,10 +108,21 @@ SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bypass.c
>  SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c
>  endif
>  
> +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
> +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> +SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bifurcate.c
> +endif
> +endif
>  
>  # this lib depends upon:
>  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_eal lib/librte_ether
>  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_mempool lib/librte_mbuf
>  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_net lib/librte_malloc
> +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
> +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_bifurc
> +endif
> +endif
> +
>  
>  include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> new file mode 100644
> index 0000000..84c445a
> --- /dev/null
> +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> @@ -0,0 +1,303 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + *   All rights reserved.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of Intel Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <rte_eal.h>
> +#include <rte_malloc.h>
> +#include <rte_memzone.h>
> +#include <rte_dev.h>
> +#include <rte_pci.h>
> +#include <rte_ethdev.h>
> +#include <rte_kvargs.h>
> +#include <rte_bifurc.h>
> +
> +#include <linux/if_ether.h>
> +#include <linux/if_packet.h>
> +#include <arpa/inet.h>
> +#include <net/if.h>
> +#include <sys/types.h>
> +#include <sys/socket.h>
> +#include <sys/ioctl.h>
> +#include <sys/mman.h>
> +#include <unistd.h>
> +#include <poll.h>
> +#include <errno.h>
> +
> +#include "ixgbe_logs.h"
> +#include "ixgbe_ethdev.h"
> +#include "ixgbe/ixgbe_api.h"
> +
> +#include <rte_mbuf.h>
> +#include <rte_bifurc.h>
> +#include "ixgbe_rxtx.h"
> +
> +static int
> +ixgbe_dev_bfc_configure(struct rte_eth_dev *dev __rte_unused)
> +{
> +	return 0;
> +}
> +
> +static void
> +ixgbe_dev_bfc_info(struct rte_eth_dev *dev,
> +		   struct rte_eth_dev_info *dev_info)
> +{
> +	rte_bifurc_ethdev_get_info(dev, dev_info);
> +}
> +
> +static void
> +ixgbe_dev_bfc_stats_get(__rte_unused struct rte_eth_dev *dev,
> +			__rte_unused struct rte_eth_stats *igb_stats)
> +{
> +	return;
> +}
> +
> +static int
> +ixgbe_dev_bfc_start(struct rte_eth_dev *dev)
> +{
> +	int err;
> +
> +	/* initialize transmission unit */
> +	ixgbe_dev_tx_init(dev);
> +
> +	/* This can fail when allocating mbufs for descriptor rings */
> +	err = ixgbe_dev_rx_init(dev);
> +	if (err) {
> +		PMD_INIT_LOG(ERR, "Unable to initialize RX hardware\n");
> +		goto error;
> +	}
> +
> +	ixgbe_dev_rxtx_start(dev);
> +
> +	return 0;
> +
> +error:
> +	PMD_INIT_LOG(ERR, "failure in ixgbe_dev_start(): %d", err);
> +	ixgbe_dev_clear_queues(dev);
> +	return -EIO;
> +}
> +
> +static void
> +ixgbe_dev_bfc_stop(struct rte_eth_dev *dev)
> +{
> +	unsigned i;
> +
> +	PMD_INIT_FUNC_TRACE();
> +
> +	for (i = 0; i < dev->data->nb_tx_queues; i++)
> +		ixgbe_dev_tx_queue_stop(dev, i);
> +
> +	for (i = 0; i < dev->data->nb_rx_queues; i++)
> +		ixgbe_dev_rx_queue_stop(dev, i);
> +}
> +
> +static void
> +ixgbe_dev_bfc_close(struct rte_eth_dev *dev)
> +{
> +	ixgbe_dev_bfc_stop(dev);
> +
> +	rte_bifurc_ethdev_free(dev);
> +}
> +
> +static inline int
> +rte_ixgbe_dev_atomic_write_link_status(struct rte_eth_dev *dev,
> +				struct rte_eth_link *link)
> +{
> +	struct rte_eth_link *dst = &(dev->data->dev_link);
> +	struct rte_eth_link *src = link;
> +
> +	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
> +					*(uint64_t *)src) == 0)
> +		return -1;
> +
> +	return 0;
> +}
> +
> +static int
> +ixgbe_dev_bfc_link_update(__rte_unused struct rte_eth_dev *dev,
> +			  __rte_unused int wait_to_complete)
> +{
> +	struct rte_eth_link link;
> +
> +	link.link_status = 1;
> +	link.link_duplex = ETH_LINK_FULL_DUPLEX;
> +	link.link_speed = ETH_LINK_SPEED_10000;
> +
> +	rte_ixgbe_dev_atomic_write_link_status(dev, &link);
> +
> +	return 0;
> +}
> +
> +static int
> +ixgbe_dev_bfc_rx_queue_setup(struct rte_eth_dev *dev,
> +			 uint16_t queue_idx,
> +			 uint16_t nb_desc,
> +			 unsigned int socket_id,
> +			 const struct rte_eth_rxconf *rx_conf,
> +			 struct rte_mempool *mp)
> +{
> +	uint16_t offset = rte_bifurc_qp_base(dev);
> +	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
> +				   socket_id, rx_conf, mp);
> +}
> +
> +static int
> +ixgbe_dev_bfc_tx_queue_setup(struct rte_eth_dev *dev,
> +			     uint16_t queue_idx,
> +			     uint16_t nb_desc,
> +			     unsigned int socket_id,
> +			     const struct rte_eth_txconf *tx_conf)
> +{
> +	uint16_t offset = rte_bifurc_qp_base(dev);
> +	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
> +				   nb_desc, socket_id, tx_conf);
> +}
> +
> +static struct eth_dev_ops ixgbe_bifurc_ops = {
> +	.dev_start = ixgbe_dev_bfc_start,
> +	.dev_stop = ixgbe_dev_bfc_stop,
> +	.dev_close = ixgbe_dev_bfc_close,
> +	.dev_configure = ixgbe_dev_bfc_configure,
> +	.dev_infos_get = ixgbe_dev_bfc_info,
> +	.rx_queue_setup = ixgbe_dev_bfc_rx_queue_setup,
> +	.tx_queue_setup = ixgbe_dev_bfc_tx_queue_setup,
> +	.rx_queue_release = ixgbe_dev_rx_queue_release,
> +	.tx_queue_release = ixgbe_dev_tx_queue_release,
> +	.link_update = ixgbe_dev_bfc_link_update,
> +	.stats_get = ixgbe_dev_bfc_stats_get,
> +	.stats_reset = NULL,
> +};
> +
> +static int
> +eth_ixgbe_bifurc_dev_init(struct eth_driver *eth_drv __rte_unused,
> +			  struct rte_eth_dev *eth_dev)
> +{
> +	struct rte_pci_device *pci_dev;
> +	struct ixgbe_hw *hw =
> +		IXGBE_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
> +	int diag;
> +
> +	PMD_INIT_FUNC_TRACE();
> +
> +	eth_dev->dev_ops = &ixgbe_bifurc_ops;
> +	eth_dev->rx_pkt_burst = &ixgbe_recv_pkts;
> +	eth_dev->tx_pkt_burst = &ixgbe_xmit_pkts;
> +
> +	/* for secondary processes, we don't initialise any further as primary
> +	 * has already done this work. Only check we don't need a different
> +	 * RX function */
> +	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> +		if (eth_dev->data->scattered_rx)
> +			eth_dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
> +		return 0;
> +	}
> +	pci_dev = eth_dev->pci_dev;
> +
> +	/* Vendor and Device ID need to be set before init of shared code */
> +	hw->device_id = pci_dev->id.device_id;
> +	hw->vendor_id = pci_dev->id.vendor_id;
> +	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
> +
> +#ifdef RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP
> +	hw->allow_unsupported_sfp = 1;
> +#endif
> +
> +	/* Initialize the shared code (base driver) */
> +#ifdef RTE_NIC_BYPASS
> +	diag = ixgbe_bypass_init_shared_code(hw);
> +#else
> +	diag = ixgbe_init_shared_code(hw);
> +#endif /* RTE_NIC_BYPASS */
> +
> +	if (diag != IXGBE_SUCCESS) {
> +		PMD_INIT_LOG(ERR, "Shared code init failed: %d", diag);
> +		return -EIO;
> +	}
> +
> +	/* Allocate memory for storing MAC addresses */
> +	eth_dev->data->mac_addrs = rte_zmalloc("ixgbe", ETHER_ADDR_LEN *
> +			hw->mac.num_rar_entries, 0);
> +	if (eth_dev->data->mac_addrs == NULL) {
> +		PMD_INIT_LOG(ERR,
> +			"Failed to allocate %u bytes needed to store "
> +			"MAC addresses",
> +			ETHER_ADDR_LEN * hw->mac.num_rar_entries);
> +		return -ENOMEM;
> +	}
> +	rte_bifurc_mac_addr(eth_dev, &eth_dev->data->mac_addrs[0]);
> +
> +	return diag;
> +}
> +
> +/*
> + * The set of PCI devices this driver supports
> + */
> +static struct rte_pci_id pci_id_ixgbe_map[] = {
> +
> +#define RTE_PCI_DEV_ID_DECL_IXGBE(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
> +#define RTE_PCI_DEV_ID_DECL_IXGBEVF(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
> +#include "rte_pci_dev_ids.h"
> +
> +{ .vendor_id = 0, /* sentinel */ },
> +};
> +
> +static struct eth_driver rte_ixgbe_bifurc_pmd = {
> +	{
> +		.name = "rte_ixgbe_bifurc_pmd",
> +		.id_table = pci_id_ixgbe_map,
> +		.drv_flags = RTE_PCI_DRV_NEED_MAPPING |
> +			RTE_PCI_DRV_BIFURC,
> +	},
> +	.eth_dev_init = eth_ixgbe_bifurc_dev_init,
> +	.dev_private_size = sizeof(struct ixgbe_adapter),
> +};
> +
> +/*
> + * Driver initialization routine.
> + * Invoked once at EAL init time.
> + * Register itself as the [Poll Mode] Driver of PCI IXGBE devices.
> + */
> +static int
> +rte_ixgbe_bifurc_pmd_init(const char *name __rte_unused,
> +			  const char *params __rte_unused)
> +{
> +	PMD_INIT_FUNC_TRACE();
> +
> +	rte_eth_driver_register(&rte_ixgbe_bifurc_pmd);
> +	return 0;
> +}
> +
> +static struct rte_driver rte_ixgbe_bifurc_driver = {
> +	.type = PMD_PDEV,
> +	.init = rte_ixgbe_bifurc_pmd_init,
> +};
> +
> +PMD_REGISTER_DRIVER(rte_ixgbe_bifurc_driver);
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> new file mode 100644
> index 0000000..d40b21d
> --- /dev/null
> +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> @@ -0,0 +1,57 @@
> +/*-
> + *   BSD LICENSE
> + *
> + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + *   All rights reserved.
> + *
> + *   Redistribution and use in source and binary forms, with or without
> + *   modification, are permitted provided that the following conditions
> + *   are met:
> + *
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in
> + *       the documentation and/or other materials provided with the
> + *       distribution.
> + *     * Neither the name of Intel Corporation nor the names of its
> + *       contributors may be used to endorse or promote products derived
> + *       from this software without specific prior written permission.
> + *
> + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef _IXGBE_BIFFURCATE_H_
> +#define _IXGBE_BIFFURCATE_H_
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +#define IXGBE_82599_MAX_RX_QUEUES 128
> +
> +#define RTE_PMD_PACKET_RING_SPLITOFF_LOWER_LIMIT 32
> +#define RTE_PMD_PACKET_MAX_RING_PAIRS  IXGBE_82599_MAX_RX_QUEUES
> +
> +
> +/**
> + * For use by the EAL only. Called as part of EAL init to set up any dummy NICs
> + * configured on command line.
> + */
> +int rte_ixgbe_bfc_pmd_init(const char *name, const char *params);
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> index e240376..2d32907 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> @@ -100,6 +100,12 @@ rte_rxmbuf_alloc(struct rte_mempool *mp)
>  	return (m);
>  }
>  
> +static inline uint16_t
> +ixgbe_dev_queue_offset(struct rte_eth_dev *dev)
> +{
> +	return (RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> +		0 : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx;
> +}
>  
>  #if 1
>  #define RTE_PMD_USE_PREFETCH
> @@ -1726,6 +1732,17 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
>  			 unsigned int socket_id,
>  			 const struct rte_eth_txconf *tx_conf)
>  {
> +	uint16_t offset = ixgbe_dev_queue_offset(dev);
> +	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
> +				   nb_desc, socket_id, tx_conf);
> +}
> +
> +int
> +ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
> +		    uint16_t queue_idx, uint16_t offset,
> +		    uint16_t nb_desc, unsigned int socket_id,
> +		    const struct rte_eth_txconf *tx_conf)
> +{
>  	const struct rte_memzone *tz;
>  	struct igb_tx_queue *txq;
>  	struct ixgbe_hw     *hw;
> @@ -1849,8 +1866,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
>  	txq->hthresh = tx_conf->tx_thresh.hthresh;
>  	txq->wthresh = tx_conf->tx_thresh.wthresh;
>  	txq->queue_id = queue_idx;
> -	txq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> -		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
> +	txq->reg_idx  = queue_idx + offset;
>  	txq->port_id = dev->data->port_id;
>  	txq->txq_flags = tx_conf->txq_flags;
>  	txq->ops = &def_txq_ops;
> @@ -2083,6 +2099,18 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
>  			 const struct rte_eth_rxconf *rx_conf,
>  			 struct rte_mempool *mp)
>  {
> +	uint16_t offset = ixgbe_dev_queue_offset(dev);
> +	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
> +				   socket_id, rx_conf, mp);
> +}
> +
> +int
> +ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
> +		    uint16_t queue_idx, uint16_t offset,
> +		    uint16_t nb_desc, unsigned int socket_id,
> +		    const struct rte_eth_rxconf *rx_conf,
> +		    struct rte_mempool *mp)
> +{
>  	const struct rte_memzone *rz;
>  	struct igb_rx_queue *rxq;
>  	struct ixgbe_hw     *hw;
> @@ -2118,8 +2146,7 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
>  	rxq->nb_rx_desc = nb_desc;
>  	rxq->rx_free_thresh = rx_conf->rx_free_thresh;
>  	rxq->queue_id = queue_idx;
> -	rxq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> -		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
> +	rxq->reg_idx  =	queue_idx + offset;
>  	rxq->port_id = dev->data->port_id;
>  	rxq->crc_len = (uint8_t) ((dev->data->dev_conf.rxmode.hw_strip_crc) ?
>  							0 : ETHER_CRC_LEN);
> @@ -3402,9 +3429,9 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
>  	uint32_t fctrl;
>  	uint32_t hlreg0;
>  	uint32_t maxfrs;
> -	uint32_t srrctl;
>  	uint32_t rdrxctl;
>  	uint32_t rxcsum;
> +	uint32_t srrctl;
>  	uint16_t buf_size;
>  	uint16_t i;
>  
> @@ -3684,9 +3711,9 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>  	struct ixgbe_hw     *hw;
>  	struct igb_tx_queue *txq;
>  	struct igb_rx_queue *rxq;
> -	uint32_t txdctl;
>  	uint32_t dmatxctl;
>  	uint32_t rxctrl;
> +	uint32_t txdctl;
>  	uint16_t i;
>  
>  	PMD_INIT_FUNC_TRACE();
> @@ -3731,7 +3758,6 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>  	if (hw->mac.type == ixgbe_mac_82599EB &&
>  			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
>  		ixgbe_setup_loopback_link_82599(hw);
> -
>  }
>  
>  /*
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> index eb89715..aeffb5f 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> @@ -243,6 +243,16 @@ struct ixgbe_txq_ops {
>  			 IXGBE_ADVTXD_DCMD_DEXT |\
>  			 IXGBE_ADVTXD_DCMD_EOP)
>  
> +int ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
> +			uint16_t queue_idx, uint16_t offset,
> +			uint16_t nb_desc, unsigned int socket_id,
> +			const struct rte_eth_txconf *tx_conf);
> +int ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
> +			uint16_t queue_idx, uint16_t offset,
> +			uint16_t nb_desc, unsigned int socket_id,
> +			const struct rte_eth_rxconf *rx_conf,
> +			struct rte_mempool *mp);
> +
>  #ifdef RTE_IXGBE_INC_VECTOR
>  uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
>  		uint16_t nb_pkts);
> -- 
> 1.8.1.4
>
Cunming Liang Nov. 25, 2014, 2:48 p.m. UTC | #2
> -----Original Message-----
> From: Richardson, Bruce
> Sent: Tuesday, November 25, 2014 10:34 PM
> To: Liang, Cunming
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device
> 
> On Tue, Nov 25, 2014 at 10:11:22PM +0800, Cunming Liang wrote:
> > Signed-off-by: Cunming Liang <cunming.liang@intel.com>
> > ---
> >  lib/librte_pmd_ixgbe/Makefile          |  13 +-
> >  lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303
> +++++++++++++++++++++++++++++++++
> >  lib/librte_pmd_ixgbe/ixgbe_bifurcate.h |  57 +++++++
> >  lib/librte_pmd_ixgbe/ixgbe_rxtx.c      |  40 ++++-
> >  lib/librte_pmd_ixgbe/ixgbe_rxtx.h      |  10 ++
> >  5 files changed, 415 insertions(+), 8 deletions(-)
> >  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> >  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> >
> 
> These changes are the ones that I'm not too sure about. I'd prefer if all
> material for the bifurcated driver be kept within the librte_pmd_bifurc directory.
[Liang, Cunming] I haven't a librte_pmd_bifurc library. 
So far the purpose of librte_bifurc is for device scan, not used as a pmd.
During driver probe, depend on device id, it asks for correct pmd from 'librte_pmd_ixgbe, librte_pmd_i40e'.

> Is it possible to leave ixgbe largely unmodified and simply have the new
> bifurcated driver pull in the needed ixgbe (and later i40e) functions at
> compile time i.e. refer from one Makefile to the sources in the other
> driver's directory?
[Liang, Cunming] Nice point. If we have single directory gathering all direct ring access.
e.g. We have aka "librte_pmd_bifurc", inside it, we'll have bifurc_ixgbe, bifurc_i40e, ...
Each of them still depend on other libraries like librte_pmd_ixgbe/librte_pmd_i40e.
We may remove the internal dependence inside one pmd driver, but between libraries we add more.

> My thinking is that the bifurcated driver is so significantly different in
> the way it works, and the limits on it's functionality e.g. no direct filter
> support or queue management, that it's best kept completely separate and only
> "borrow" the needed descriptor read/write functions from the other drivers as is
> needed.
> 
> Just my 2c. I'm curious as to what others think.
> 
> /Bruce
> 
> > diff --git a/lib/librte_pmd_ixgbe/Makefile b/lib/librte_pmd_ixgbe/Makefile
> > index 3588047..6867f17 100644
> > --- a/lib/librte_pmd_ixgbe/Makefile
> > +++ b/lib/librte_pmd_ixgbe/Makefile
> > @@ -37,7 +37,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
> >  LIB = librte_pmd_ixgbe.a
> >
> >  CFLAGS += -O3
> > -CFLAGS += $(WERROR_FLAGS)
> > +CFLAGS += $(WERROR_FLAGS) -Wno-cast-qual
> >
> >  ifeq ($(CC), icc)
> >  #
> > @@ -108,10 +108,21 @@ SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) +=
> ixgbe_bypass.c
> >  SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c
> >  endif
> >
> > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
> > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> > +SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bifurcate.c
> > +endif
> > +endif
> >
> >  # this lib depends upon:
> >  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_eal
> lib/librte_ether
> >  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_mempool
> lib/librte_mbuf
> >  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_net
> lib/librte_malloc
> > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
> > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> > +DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_bifurc
> > +endif
> > +endif
> > +
> >
> >  include $(RTE_SDK)/mk/rte.lib.mk
> > diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > new file mode 100644
> > index 0000000..84c445a
> > --- /dev/null
> > +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > @@ -0,0 +1,303 @@
> > +/*-
> > + *   BSD LICENSE
> > + *
> > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > + *   All rights reserved.
> > + *
> > + *   Redistribution and use in source and binary forms, with or without
> > + *   modification, are permitted provided that the following conditions
> > + *   are met:
> > + *
> > + *     * Redistributions of source code must retain the above copyright
> > + *       notice, this list of conditions and the following disclaimer.
> > + *     * Redistributions in binary form must reproduce the above copyright
> > + *       notice, this list of conditions and the following disclaimer in
> > + *       the documentation and/or other materials provided with the
> > + *       distribution.
> > + *     * Neither the name of Intel Corporation nor the names of its
> > + *       contributors may be used to endorse or promote products derived
> > + *       from this software without specific prior written permission.
> > + *
> > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY
> > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> > + */
> > +
> > +#include <rte_eal.h>
> > +#include <rte_malloc.h>
> > +#include <rte_memzone.h>
> > +#include <rte_dev.h>
> > +#include <rte_pci.h>
> > +#include <rte_ethdev.h>
> > +#include <rte_kvargs.h>
> > +#include <rte_bifurc.h>
> > +
> > +#include <linux/if_ether.h>
> > +#include <linux/if_packet.h>
> > +#include <arpa/inet.h>
> > +#include <net/if.h>
> > +#include <sys/types.h>
> > +#include <sys/socket.h>
> > +#include <sys/ioctl.h>
> > +#include <sys/mman.h>
> > +#include <unistd.h>
> > +#include <poll.h>
> > +#include <errno.h>
> > +
> > +#include "ixgbe_logs.h"
> > +#include "ixgbe_ethdev.h"
> > +#include "ixgbe/ixgbe_api.h"
> > +
> > +#include <rte_mbuf.h>
> > +#include <rte_bifurc.h>
> > +#include "ixgbe_rxtx.h"
> > +
> > +static int
> > +ixgbe_dev_bfc_configure(struct rte_eth_dev *dev __rte_unused)
> > +{
> > +	return 0;
> > +}
> > +
> > +static void
> > +ixgbe_dev_bfc_info(struct rte_eth_dev *dev,
> > +		   struct rte_eth_dev_info *dev_info)
> > +{
> > +	rte_bifurc_ethdev_get_info(dev, dev_info);
> > +}
> > +
> > +static void
> > +ixgbe_dev_bfc_stats_get(__rte_unused struct rte_eth_dev *dev,
> > +			__rte_unused struct rte_eth_stats *igb_stats)
> > +{
> > +	return;
> > +}
> > +
> > +static int
> > +ixgbe_dev_bfc_start(struct rte_eth_dev *dev)
> > +{
> > +	int err;
> > +
> > +	/* initialize transmission unit */
> > +	ixgbe_dev_tx_init(dev);
> > +
> > +	/* This can fail when allocating mbufs for descriptor rings */
> > +	err = ixgbe_dev_rx_init(dev);
> > +	if (err) {
> > +		PMD_INIT_LOG(ERR, "Unable to initialize RX hardware\n");
> > +		goto error;
> > +	}
> > +
> > +	ixgbe_dev_rxtx_start(dev);
> > +
> > +	return 0;
> > +
> > +error:
> > +	PMD_INIT_LOG(ERR, "failure in ixgbe_dev_start(): %d", err);
> > +	ixgbe_dev_clear_queues(dev);
> > +	return -EIO;
> > +}
> > +
> > +static void
> > +ixgbe_dev_bfc_stop(struct rte_eth_dev *dev)
> > +{
> > +	unsigned i;
> > +
> > +	PMD_INIT_FUNC_TRACE();
> > +
> > +	for (i = 0; i < dev->data->nb_tx_queues; i++)
> > +		ixgbe_dev_tx_queue_stop(dev, i);
> > +
> > +	for (i = 0; i < dev->data->nb_rx_queues; i++)
> > +		ixgbe_dev_rx_queue_stop(dev, i);
> > +}
> > +
> > +static void
> > +ixgbe_dev_bfc_close(struct rte_eth_dev *dev)
> > +{
> > +	ixgbe_dev_bfc_stop(dev);
> > +
> > +	rte_bifurc_ethdev_free(dev);
> > +}
> > +
> > +static inline int
> > +rte_ixgbe_dev_atomic_write_link_status(struct rte_eth_dev *dev,
> > +				struct rte_eth_link *link)
> > +{
> > +	struct rte_eth_link *dst = &(dev->data->dev_link);
> > +	struct rte_eth_link *src = link;
> > +
> > +	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
> > +					*(uint64_t *)src) == 0)
> > +		return -1;
> > +
> > +	return 0;
> > +}
> > +
> > +static int
> > +ixgbe_dev_bfc_link_update(__rte_unused struct rte_eth_dev *dev,
> > +			  __rte_unused int wait_to_complete)
> > +{
> > +	struct rte_eth_link link;
> > +
> > +	link.link_status = 1;
> > +	link.link_duplex = ETH_LINK_FULL_DUPLEX;
> > +	link.link_speed = ETH_LINK_SPEED_10000;
> > +
> > +	rte_ixgbe_dev_atomic_write_link_status(dev, &link);
> > +
> > +	return 0;
> > +}
> > +
> > +static int
> > +ixgbe_dev_bfc_rx_queue_setup(struct rte_eth_dev *dev,
> > +			 uint16_t queue_idx,
> > +			 uint16_t nb_desc,
> > +			 unsigned int socket_id,
> > +			 const struct rte_eth_rxconf *rx_conf,
> > +			 struct rte_mempool *mp)
> > +{
> > +	uint16_t offset = rte_bifurc_qp_base(dev);
> > +	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
> > +				   socket_id, rx_conf, mp);
> > +}
> > +
> > +static int
> > +ixgbe_dev_bfc_tx_queue_setup(struct rte_eth_dev *dev,
> > +			     uint16_t queue_idx,
> > +			     uint16_t nb_desc,
> > +			     unsigned int socket_id,
> > +			     const struct rte_eth_txconf *tx_conf)
> > +{
> > +	uint16_t offset = rte_bifurc_qp_base(dev);
> > +	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
> > +				   nb_desc, socket_id, tx_conf);
> > +}
> > +
> > +static struct eth_dev_ops ixgbe_bifurc_ops = {
> > +	.dev_start = ixgbe_dev_bfc_start,
> > +	.dev_stop = ixgbe_dev_bfc_stop,
> > +	.dev_close = ixgbe_dev_bfc_close,
> > +	.dev_configure = ixgbe_dev_bfc_configure,
> > +	.dev_infos_get = ixgbe_dev_bfc_info,
> > +	.rx_queue_setup = ixgbe_dev_bfc_rx_queue_setup,
> > +	.tx_queue_setup = ixgbe_dev_bfc_tx_queue_setup,
> > +	.rx_queue_release = ixgbe_dev_rx_queue_release,
> > +	.tx_queue_release = ixgbe_dev_tx_queue_release,
> > +	.link_update = ixgbe_dev_bfc_link_update,
> > +	.stats_get = ixgbe_dev_bfc_stats_get,
> > +	.stats_reset = NULL,
> > +};
> > +
> > +static int
> > +eth_ixgbe_bifurc_dev_init(struct eth_driver *eth_drv __rte_unused,
> > +			  struct rte_eth_dev *eth_dev)
> > +{
> > +	struct rte_pci_device *pci_dev;
> > +	struct ixgbe_hw *hw =
> > +		IXGBE_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
> > +	int diag;
> > +
> > +	PMD_INIT_FUNC_TRACE();
> > +
> > +	eth_dev->dev_ops = &ixgbe_bifurc_ops;
> > +	eth_dev->rx_pkt_burst = &ixgbe_recv_pkts;
> > +	eth_dev->tx_pkt_burst = &ixgbe_xmit_pkts;
> > +
> > +	/* for secondary processes, we don't initialise any further as primary
> > +	 * has already done this work. Only check we don't need a different
> > +	 * RX function */
> > +	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> > +		if (eth_dev->data->scattered_rx)
> > +			eth_dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
> > +		return 0;
> > +	}
> > +	pci_dev = eth_dev->pci_dev;
> > +
> > +	/* Vendor and Device ID need to be set before init of shared code */
> > +	hw->device_id = pci_dev->id.device_id;
> > +	hw->vendor_id = pci_dev->id.vendor_id;
> > +	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
> > +
> > +#ifdef RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP
> > +	hw->allow_unsupported_sfp = 1;
> > +#endif
> > +
> > +	/* Initialize the shared code (base driver) */
> > +#ifdef RTE_NIC_BYPASS
> > +	diag = ixgbe_bypass_init_shared_code(hw);
> > +#else
> > +	diag = ixgbe_init_shared_code(hw);
> > +#endif /* RTE_NIC_BYPASS */
> > +
> > +	if (diag != IXGBE_SUCCESS) {
> > +		PMD_INIT_LOG(ERR, "Shared code init failed: %d", diag);
> > +		return -EIO;
> > +	}
> > +
> > +	/* Allocate memory for storing MAC addresses */
> > +	eth_dev->data->mac_addrs = rte_zmalloc("ixgbe", ETHER_ADDR_LEN *
> > +			hw->mac.num_rar_entries, 0);
> > +	if (eth_dev->data->mac_addrs == NULL) {
> > +		PMD_INIT_LOG(ERR,
> > +			"Failed to allocate %u bytes needed to store "
> > +			"MAC addresses",
> > +			ETHER_ADDR_LEN * hw->mac.num_rar_entries);
> > +		return -ENOMEM;
> > +	}
> > +	rte_bifurc_mac_addr(eth_dev, &eth_dev->data->mac_addrs[0]);
> > +
> > +	return diag;
> > +}
> > +
> > +/*
> > + * The set of PCI devices this driver supports
> > + */
> > +static struct rte_pci_id pci_id_ixgbe_map[] = {
> > +
> > +#define RTE_PCI_DEV_ID_DECL_IXGBE(vend, dev) {RTE_PCI_DEVICE(vend,
> dev)},
> > +#define RTE_PCI_DEV_ID_DECL_IXGBEVF(vend, dev) {RTE_PCI_DEVICE(vend,
> dev)},
> > +#include "rte_pci_dev_ids.h"
> > +
> > +{ .vendor_id = 0, /* sentinel */ },
> > +};
> > +
> > +static struct eth_driver rte_ixgbe_bifurc_pmd = {
> > +	{
> > +		.name = "rte_ixgbe_bifurc_pmd",
> > +		.id_table = pci_id_ixgbe_map,
> > +		.drv_flags = RTE_PCI_DRV_NEED_MAPPING |
> > +			RTE_PCI_DRV_BIFURC,
> > +	},
> > +	.eth_dev_init = eth_ixgbe_bifurc_dev_init,
> > +	.dev_private_size = sizeof(struct ixgbe_adapter),
> > +};
> > +
> > +/*
> > + * Driver initialization routine.
> > + * Invoked once at EAL init time.
> > + * Register itself as the [Poll Mode] Driver of PCI IXGBE devices.
> > + */
> > +static int
> > +rte_ixgbe_bifurc_pmd_init(const char *name __rte_unused,
> > +			  const char *params __rte_unused)
> > +{
> > +	PMD_INIT_FUNC_TRACE();
> > +
> > +	rte_eth_driver_register(&rte_ixgbe_bifurc_pmd);
> > +	return 0;
> > +}
> > +
> > +static struct rte_driver rte_ixgbe_bifurc_driver = {
> > +	.type = PMD_PDEV,
> > +	.init = rte_ixgbe_bifurc_pmd_init,
> > +};
> > +
> > +PMD_REGISTER_DRIVER(rte_ixgbe_bifurc_driver);
> > diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > new file mode 100644
> > index 0000000..d40b21d
> > --- /dev/null
> > +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > @@ -0,0 +1,57 @@
> > +/*-
> > + *   BSD LICENSE
> > + *
> > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > + *   All rights reserved.
> > + *
> > + *   Redistribution and use in source and binary forms, with or without
> > + *   modification, are permitted provided that the following conditions
> > + *   are met:
> > + *
> > + *     * Redistributions of source code must retain the above copyright
> > + *       notice, this list of conditions and the following disclaimer.
> > + *     * Redistributions in binary form must reproduce the above copyright
> > + *       notice, this list of conditions and the following disclaimer in
> > + *       the documentation and/or other materials provided with the
> > + *       distribution.
> > + *     * Neither the name of Intel Corporation nor the names of its
> > + *       contributors may be used to endorse or promote products derived
> > + *       from this software without specific prior written permission.
> > + *
> > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY
> > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> > + */
> > +
> > +#ifndef _IXGBE_BIFFURCATE_H_
> > +#define _IXGBE_BIFFURCATE_H_
> > +
> > +#ifdef __cplusplus
> > +extern "C" {
> > +#endif
> > +
> > +#define IXGBE_82599_MAX_RX_QUEUES 128
> > +
> > +#define RTE_PMD_PACKET_RING_SPLITOFF_LOWER_LIMIT 32
> > +#define RTE_PMD_PACKET_MAX_RING_PAIRS
> IXGBE_82599_MAX_RX_QUEUES
> > +
> > +
> > +/**
> > + * For use by the EAL only. Called as part of EAL init to set up any dummy NICs
> > + * configured on command line.
> > + */
> > +int rte_ixgbe_bfc_pmd_init(const char *name, const char *params);
> > +
> > +#ifdef __cplusplus
> > +}
> > +#endif
> > +
> > +#endif
> > diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > index e240376..2d32907 100644
> > --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > @@ -100,6 +100,12 @@ rte_rxmbuf_alloc(struct rte_mempool *mp)
> >  	return (m);
> >  }
> >
> > +static inline uint16_t
> > +ixgbe_dev_queue_offset(struct rte_eth_dev *dev)
> > +{
> > +	return (RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> > +		0 : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx;
> > +}
> >
> >  #if 1
> >  #define RTE_PMD_USE_PREFETCH
> > @@ -1726,6 +1732,17 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev
> *dev,
> >  			 unsigned int socket_id,
> >  			 const struct rte_eth_txconf *tx_conf)
> >  {
> > +	uint16_t offset = ixgbe_dev_queue_offset(dev);
> > +	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
> > +				   nb_desc, socket_id, tx_conf);
> > +}
> > +
> > +int
> > +ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
> > +		    uint16_t queue_idx, uint16_t offset,
> > +		    uint16_t nb_desc, unsigned int socket_id,
> > +		    const struct rte_eth_txconf *tx_conf)
> > +{
> >  	const struct rte_memzone *tz;
> >  	struct igb_tx_queue *txq;
> >  	struct ixgbe_hw     *hw;
> > @@ -1849,8 +1866,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev
> *dev,
> >  	txq->hthresh = tx_conf->tx_thresh.hthresh;
> >  	txq->wthresh = tx_conf->tx_thresh.wthresh;
> >  	txq->queue_id = queue_idx;
> > -	txq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> > -		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
> > +	txq->reg_idx  = queue_idx + offset;
> >  	txq->port_id = dev->data->port_id;
> >  	txq->txq_flags = tx_conf->txq_flags;
> >  	txq->ops = &def_txq_ops;
> > @@ -2083,6 +2099,18 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev
> *dev,
> >  			 const struct rte_eth_rxconf *rx_conf,
> >  			 struct rte_mempool *mp)
> >  {
> > +	uint16_t offset = ixgbe_dev_queue_offset(dev);
> > +	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
> > +				   socket_id, rx_conf, mp);
> > +}
> > +
> > +int
> > +ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
> > +		    uint16_t queue_idx, uint16_t offset,
> > +		    uint16_t nb_desc, unsigned int socket_id,
> > +		    const struct rte_eth_rxconf *rx_conf,
> > +		    struct rte_mempool *mp)
> > +{
> >  	const struct rte_memzone *rz;
> >  	struct igb_rx_queue *rxq;
> >  	struct ixgbe_hw     *hw;
> > @@ -2118,8 +2146,7 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev
> *dev,
> >  	rxq->nb_rx_desc = nb_desc;
> >  	rxq->rx_free_thresh = rx_conf->rx_free_thresh;
> >  	rxq->queue_id = queue_idx;
> > -	rxq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> > -		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
> > +	rxq->reg_idx  =	queue_idx + offset;
> >  	rxq->port_id = dev->data->port_id;
> >  	rxq->crc_len = (uint8_t) ((dev->data->dev_conf.rxmode.hw_strip_crc) ?
> >  							0 : ETHER_CRC_LEN);
> > @@ -3402,9 +3429,9 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
> >  	uint32_t fctrl;
> >  	uint32_t hlreg0;
> >  	uint32_t maxfrs;
> > -	uint32_t srrctl;
> >  	uint32_t rdrxctl;
> >  	uint32_t rxcsum;
> > +	uint32_t srrctl;
> >  	uint16_t buf_size;
> >  	uint16_t i;
> >
> > @@ -3684,9 +3711,9 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
> >  	struct ixgbe_hw     *hw;
> >  	struct igb_tx_queue *txq;
> >  	struct igb_rx_queue *rxq;
> > -	uint32_t txdctl;
> >  	uint32_t dmatxctl;
> >  	uint32_t rxctrl;
> > +	uint32_t txdctl;
> >  	uint16_t i;
> >
> >  	PMD_INIT_FUNC_TRACE();
> > @@ -3731,7 +3758,6 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
> >  	if (hw->mac.type == ixgbe_mac_82599EB &&
> >  			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
> >  		ixgbe_setup_loopback_link_82599(hw);
> > -
> >  }
> >
> >  /*
> > diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > index eb89715..aeffb5f 100644
> > --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > @@ -243,6 +243,16 @@ struct ixgbe_txq_ops {
> >  			 IXGBE_ADVTXD_DCMD_DEXT |\
> >  			 IXGBE_ADVTXD_DCMD_EOP)
> >
> > +int ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
> > +			uint16_t queue_idx, uint16_t offset,
> > +			uint16_t nb_desc, unsigned int socket_id,
> > +			const struct rte_eth_txconf *tx_conf);
> > +int ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
> > +			uint16_t queue_idx, uint16_t offset,
> > +			uint16_t nb_desc, unsigned int socket_id,
> > +			const struct rte_eth_rxconf *rx_conf,
> > +			struct rte_mempool *mp);
> > +
> >  #ifdef RTE_IXGBE_INC_VECTOR
> >  uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
> >  		uint16_t nb_pkts);
> > --
> > 1.8.1.4
> >
Bruce Richardson Nov. 25, 2014, 3:01 p.m. UTC | #3
On Tue, Nov 25, 2014 at 02:48:51PM +0000, Liang, Cunming wrote:
> 
> 
> > -----Original Message-----
> > From: Richardson, Bruce
> > Sent: Tuesday, November 25, 2014 10:34 PM
> > To: Liang, Cunming
> > Cc: dev@dpdk.org
> > Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device
> > 
> > On Tue, Nov 25, 2014 at 10:11:22PM +0800, Cunming Liang wrote:
> > > Signed-off-by: Cunming Liang <cunming.liang@intel.com>
> > > ---
> > >  lib/librte_pmd_ixgbe/Makefile          |  13 +-
> > >  lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303
> > +++++++++++++++++++++++++++++++++
> > >  lib/librte_pmd_ixgbe/ixgbe_bifurcate.h |  57 +++++++
> > >  lib/librte_pmd_ixgbe/ixgbe_rxtx.c      |  40 ++++-
> > >  lib/librte_pmd_ixgbe/ixgbe_rxtx.h      |  10 ++
> > >  5 files changed, 415 insertions(+), 8 deletions(-)
> > >  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > >  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > >
> > 
> > These changes are the ones that I'm not too sure about. I'd prefer if all
> > material for the bifurcated driver be kept within the librte_pmd_bifurc directory.
> [Liang, Cunming] I haven't a librte_pmd_bifurc library. 
> So far the purpose of librte_bifurc is for device scan, not used as a pmd.
> During driver probe, depend on device id, it asks for correct pmd from 'librte_pmd_ixgbe, librte_pmd_i40e'.
> 
> > Is it possible to leave ixgbe largely unmodified and simply have the new
> > bifurcated driver pull in the needed ixgbe (and later i40e) functions at
> > compile time i.e. refer from one Makefile to the sources in the other
> > driver's directory?
> [Liang, Cunming] Nice point. If we have single directory gathering all direct ring access.
> e.g. We have aka "librte_pmd_bifurc", inside it, we'll have bifurc_ixgbe, bifurc_i40e, ...
> Each of them still depend on other libraries like librte_pmd_ixgbe/librte_pmd_i40e.
> We may remove the internal dependence inside one pmd driver, but between libraries we add more.

I'm not sure about all that. Two points:

* Why would we need separate subdirectories within the bifurcated driver directory?
The *only* thing that is different between an implementation of ixgbe and i40e to
use the bifurcated driver infrastructure is the code to map between NIC descriptors
and rte_mbufs. All the other code would be identical as far as I can work out. So the
only two routines that differ are going to be the rx_burst and tx_burst functions.
So why not just pull in those two specific functions (or sets of functions) from
their respective drivers, and keep the rest of the codebase common? It's surely
simpler than having the ixgbe driver having to be aware of whether it's operating
in bifurcated mode or uio/vfio/nic_uio mode, to check what operations are supported
or not.

* It's not really an inter-library dependency - or at least not a hugely problematic
one to my mind. With my proposal there is no need for the ixgbe or i40e drivers to
be compiled up for the bifurcated driver to work with them. It simply makes use
of the rx and tx code functions to do the mapping from descriptors to mbufs. While
there will be a dependency on those functions, the nice thing is that those functions
are already standardized by the ethdev API, so we don't need to worry about
internal changes inside the drivers changing the APIs of those functions.

/Bruce


> 
> > My thinking is that the bifurcated driver is so significantly different in
> > the way it works, and the limits on it's functionality e.g. no direct filter
> > support or queue management, that it's best kept completely separate and only
> > "borrow" the needed descriptor read/write functions from the other drivers as is
> > needed.
> > 
> > Just my 2c. I'm curious as to what others think.
> > 
> > /Bruce
> > 
> > > diff --git a/lib/librte_pmd_ixgbe/Makefile b/lib/librte_pmd_ixgbe/Makefile
> > > index 3588047..6867f17 100644
> > > --- a/lib/librte_pmd_ixgbe/Makefile
> > > +++ b/lib/librte_pmd_ixgbe/Makefile
> > > @@ -37,7 +37,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
> > >  LIB = librte_pmd_ixgbe.a
> > >
> > >  CFLAGS += -O3
> > > -CFLAGS += $(WERROR_FLAGS)
> > > +CFLAGS += $(WERROR_FLAGS) -Wno-cast-qual
> > >
> > >  ifeq ($(CC), icc)
> > >  #
> > > @@ -108,10 +108,21 @@ SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) +=
> > ixgbe_bypass.c
> > >  SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c
> > >  endif
> > >
> > > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
> > > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> > > +SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bifurcate.c
> > > +endif
> > > +endif
> > >
> > >  # this lib depends upon:
> > >  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_eal
> > lib/librte_ether
> > >  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_mempool
> > lib/librte_mbuf
> > >  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_net
> > lib/librte_malloc
> > > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
> > > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> > > +DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_bifurc
> > > +endif
> > > +endif
> > > +
> > >
> > >  include $(RTE_SDK)/mk/rte.lib.mk
> > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > > new file mode 100644
> > > index 0000000..84c445a
> > > --- /dev/null
> > > +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > > @@ -0,0 +1,303 @@
> > > +/*-
> > > + *   BSD LICENSE
> > > + *
> > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > + *   All rights reserved.
> > > + *
> > > + *   Redistribution and use in source and binary forms, with or without
> > > + *   modification, are permitted provided that the following conditions
> > > + *   are met:
> > > + *
> > > + *     * Redistributions of source code must retain the above copyright
> > > + *       notice, this list of conditions and the following disclaimer.
> > > + *     * Redistributions in binary form must reproduce the above copyright
> > > + *       notice, this list of conditions and the following disclaimer in
> > > + *       the documentation and/or other materials provided with the
> > > + *       distribution.
> > > + *     * Neither the name of Intel Corporation nor the names of its
> > > + *       contributors may be used to endorse or promote products derived
> > > + *       from this software without specific prior written permission.
> > > + *
> > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > NOT
> > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > OF USE,
> > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> > ON ANY
> > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > THE USE
> > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > > + */
> > > +
> > > +#include <rte_eal.h>
> > > +#include <rte_malloc.h>
> > > +#include <rte_memzone.h>
> > > +#include <rte_dev.h>
> > > +#include <rte_pci.h>
> > > +#include <rte_ethdev.h>
> > > +#include <rte_kvargs.h>
> > > +#include <rte_bifurc.h>
> > > +
> > > +#include <linux/if_ether.h>
> > > +#include <linux/if_packet.h>
> > > +#include <arpa/inet.h>
> > > +#include <net/if.h>
> > > +#include <sys/types.h>
> > > +#include <sys/socket.h>
> > > +#include <sys/ioctl.h>
> > > +#include <sys/mman.h>
> > > +#include <unistd.h>
> > > +#include <poll.h>
> > > +#include <errno.h>
> > > +
> > > +#include "ixgbe_logs.h"
> > > +#include "ixgbe_ethdev.h"
> > > +#include "ixgbe/ixgbe_api.h"
> > > +
> > > +#include <rte_mbuf.h>
> > > +#include <rte_bifurc.h>
> > > +#include "ixgbe_rxtx.h"
> > > +
> > > +static int
> > > +ixgbe_dev_bfc_configure(struct rte_eth_dev *dev __rte_unused)
> > > +{
> > > +	return 0;
> > > +}
> > > +
> > > +static void
> > > +ixgbe_dev_bfc_info(struct rte_eth_dev *dev,
> > > +		   struct rte_eth_dev_info *dev_info)
> > > +{
> > > +	rte_bifurc_ethdev_get_info(dev, dev_info);
> > > +}
> > > +
> > > +static void
> > > +ixgbe_dev_bfc_stats_get(__rte_unused struct rte_eth_dev *dev,
> > > +			__rte_unused struct rte_eth_stats *igb_stats)
> > > +{
> > > +	return;
> > > +}
> > > +
> > > +static int
> > > +ixgbe_dev_bfc_start(struct rte_eth_dev *dev)
> > > +{
> > > +	int err;
> > > +
> > > +	/* initialize transmission unit */
> > > +	ixgbe_dev_tx_init(dev);
> > > +
> > > +	/* This can fail when allocating mbufs for descriptor rings */
> > > +	err = ixgbe_dev_rx_init(dev);
> > > +	if (err) {
> > > +		PMD_INIT_LOG(ERR, "Unable to initialize RX hardware\n");
> > > +		goto error;
> > > +	}
> > > +
> > > +	ixgbe_dev_rxtx_start(dev);
> > > +
> > > +	return 0;
> > > +
> > > +error:
> > > +	PMD_INIT_LOG(ERR, "failure in ixgbe_dev_start(): %d", err);
> > > +	ixgbe_dev_clear_queues(dev);
> > > +	return -EIO;
> > > +}
> > > +
> > > +static void
> > > +ixgbe_dev_bfc_stop(struct rte_eth_dev *dev)
> > > +{
> > > +	unsigned i;
> > > +
> > > +	PMD_INIT_FUNC_TRACE();
> > > +
> > > +	for (i = 0; i < dev->data->nb_tx_queues; i++)
> > > +		ixgbe_dev_tx_queue_stop(dev, i);
> > > +
> > > +	for (i = 0; i < dev->data->nb_rx_queues; i++)
> > > +		ixgbe_dev_rx_queue_stop(dev, i);
> > > +}
> > > +
> > > +static void
> > > +ixgbe_dev_bfc_close(struct rte_eth_dev *dev)
> > > +{
> > > +	ixgbe_dev_bfc_stop(dev);
> > > +
> > > +	rte_bifurc_ethdev_free(dev);
> > > +}
> > > +
> > > +static inline int
> > > +rte_ixgbe_dev_atomic_write_link_status(struct rte_eth_dev *dev,
> > > +				struct rte_eth_link *link)
> > > +{
> > > +	struct rte_eth_link *dst = &(dev->data->dev_link);
> > > +	struct rte_eth_link *src = link;
> > > +
> > > +	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
> > > +					*(uint64_t *)src) == 0)
> > > +		return -1;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int
> > > +ixgbe_dev_bfc_link_update(__rte_unused struct rte_eth_dev *dev,
> > > +			  __rte_unused int wait_to_complete)
> > > +{
> > > +	struct rte_eth_link link;
> > > +
> > > +	link.link_status = 1;
> > > +	link.link_duplex = ETH_LINK_FULL_DUPLEX;
> > > +	link.link_speed = ETH_LINK_SPEED_10000;
> > > +
> > > +	rte_ixgbe_dev_atomic_write_link_status(dev, &link);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int
> > > +ixgbe_dev_bfc_rx_queue_setup(struct rte_eth_dev *dev,
> > > +			 uint16_t queue_idx,
> > > +			 uint16_t nb_desc,
> > > +			 unsigned int socket_id,
> > > +			 const struct rte_eth_rxconf *rx_conf,
> > > +			 struct rte_mempool *mp)
> > > +{
> > > +	uint16_t offset = rte_bifurc_qp_base(dev);
> > > +	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
> > > +				   socket_id, rx_conf, mp);
> > > +}
> > > +
> > > +static int
> > > +ixgbe_dev_bfc_tx_queue_setup(struct rte_eth_dev *dev,
> > > +			     uint16_t queue_idx,
> > > +			     uint16_t nb_desc,
> > > +			     unsigned int socket_id,
> > > +			     const struct rte_eth_txconf *tx_conf)
> > > +{
> > > +	uint16_t offset = rte_bifurc_qp_base(dev);
> > > +	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
> > > +				   nb_desc, socket_id, tx_conf);
> > > +}
> > > +
> > > +static struct eth_dev_ops ixgbe_bifurc_ops = {
> > > +	.dev_start = ixgbe_dev_bfc_start,
> > > +	.dev_stop = ixgbe_dev_bfc_stop,
> > > +	.dev_close = ixgbe_dev_bfc_close,
> > > +	.dev_configure = ixgbe_dev_bfc_configure,
> > > +	.dev_infos_get = ixgbe_dev_bfc_info,
> > > +	.rx_queue_setup = ixgbe_dev_bfc_rx_queue_setup,
> > > +	.tx_queue_setup = ixgbe_dev_bfc_tx_queue_setup,
> > > +	.rx_queue_release = ixgbe_dev_rx_queue_release,
> > > +	.tx_queue_release = ixgbe_dev_tx_queue_release,
> > > +	.link_update = ixgbe_dev_bfc_link_update,
> > > +	.stats_get = ixgbe_dev_bfc_stats_get,
> > > +	.stats_reset = NULL,
> > > +};
> > > +
> > > +static int
> > > +eth_ixgbe_bifurc_dev_init(struct eth_driver *eth_drv __rte_unused,
> > > +			  struct rte_eth_dev *eth_dev)
> > > +{
> > > +	struct rte_pci_device *pci_dev;
> > > +	struct ixgbe_hw *hw =
> > > +		IXGBE_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
> > > +	int diag;
> > > +
> > > +	PMD_INIT_FUNC_TRACE();
> > > +
> > > +	eth_dev->dev_ops = &ixgbe_bifurc_ops;
> > > +	eth_dev->rx_pkt_burst = &ixgbe_recv_pkts;
> > > +	eth_dev->tx_pkt_burst = &ixgbe_xmit_pkts;
> > > +
> > > +	/* for secondary processes, we don't initialise any further as primary
> > > +	 * has already done this work. Only check we don't need a different
> > > +	 * RX function */
> > > +	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> > > +		if (eth_dev->data->scattered_rx)
> > > +			eth_dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
> > > +		return 0;
> > > +	}
> > > +	pci_dev = eth_dev->pci_dev;
> > > +
> > > +	/* Vendor and Device ID need to be set before init of shared code */
> > > +	hw->device_id = pci_dev->id.device_id;
> > > +	hw->vendor_id = pci_dev->id.vendor_id;
> > > +	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
> > > +
> > > +#ifdef RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP
> > > +	hw->allow_unsupported_sfp = 1;
> > > +#endif
> > > +
> > > +	/* Initialize the shared code (base driver) */
> > > +#ifdef RTE_NIC_BYPASS
> > > +	diag = ixgbe_bypass_init_shared_code(hw);
> > > +#else
> > > +	diag = ixgbe_init_shared_code(hw);
> > > +#endif /* RTE_NIC_BYPASS */
> > > +
> > > +	if (diag != IXGBE_SUCCESS) {
> > > +		PMD_INIT_LOG(ERR, "Shared code init failed: %d", diag);
> > > +		return -EIO;
> > > +	}
> > > +
> > > +	/* Allocate memory for storing MAC addresses */
> > > +	eth_dev->data->mac_addrs = rte_zmalloc("ixgbe", ETHER_ADDR_LEN *
> > > +			hw->mac.num_rar_entries, 0);
> > > +	if (eth_dev->data->mac_addrs == NULL) {
> > > +		PMD_INIT_LOG(ERR,
> > > +			"Failed to allocate %u bytes needed to store "
> > > +			"MAC addresses",
> > > +			ETHER_ADDR_LEN * hw->mac.num_rar_entries);
> > > +		return -ENOMEM;
> > > +	}
> > > +	rte_bifurc_mac_addr(eth_dev, &eth_dev->data->mac_addrs[0]);
> > > +
> > > +	return diag;
> > > +}
> > > +
> > > +/*
> > > + * The set of PCI devices this driver supports
> > > + */
> > > +static struct rte_pci_id pci_id_ixgbe_map[] = {
> > > +
> > > +#define RTE_PCI_DEV_ID_DECL_IXGBE(vend, dev) {RTE_PCI_DEVICE(vend,
> > dev)},
> > > +#define RTE_PCI_DEV_ID_DECL_IXGBEVF(vend, dev) {RTE_PCI_DEVICE(vend,
> > dev)},
> > > +#include "rte_pci_dev_ids.h"
> > > +
> > > +{ .vendor_id = 0, /* sentinel */ },
> > > +};
> > > +
> > > +static struct eth_driver rte_ixgbe_bifurc_pmd = {
> > > +	{
> > > +		.name = "rte_ixgbe_bifurc_pmd",
> > > +		.id_table = pci_id_ixgbe_map,
> > > +		.drv_flags = RTE_PCI_DRV_NEED_MAPPING |
> > > +			RTE_PCI_DRV_BIFURC,
> > > +	},
> > > +	.eth_dev_init = eth_ixgbe_bifurc_dev_init,
> > > +	.dev_private_size = sizeof(struct ixgbe_adapter),
> > > +};
> > > +
> > > +/*
> > > + * Driver initialization routine.
> > > + * Invoked once at EAL init time.
> > > + * Register itself as the [Poll Mode] Driver of PCI IXGBE devices.
> > > + */
> > > +static int
> > > +rte_ixgbe_bifurc_pmd_init(const char *name __rte_unused,
> > > +			  const char *params __rte_unused)
> > > +{
> > > +	PMD_INIT_FUNC_TRACE();
> > > +
> > > +	rte_eth_driver_register(&rte_ixgbe_bifurc_pmd);
> > > +	return 0;
> > > +}
> > > +
> > > +static struct rte_driver rte_ixgbe_bifurc_driver = {
> > > +	.type = PMD_PDEV,
> > > +	.init = rte_ixgbe_bifurc_pmd_init,
> > > +};
> > > +
> > > +PMD_REGISTER_DRIVER(rte_ixgbe_bifurc_driver);
> > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > > new file mode 100644
> > > index 0000000..d40b21d
> > > --- /dev/null
> > > +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > > @@ -0,0 +1,57 @@
> > > +/*-
> > > + *   BSD LICENSE
> > > + *
> > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > + *   All rights reserved.
> > > + *
> > > + *   Redistribution and use in source and binary forms, with or without
> > > + *   modification, are permitted provided that the following conditions
> > > + *   are met:
> > > + *
> > > + *     * Redistributions of source code must retain the above copyright
> > > + *       notice, this list of conditions and the following disclaimer.
> > > + *     * Redistributions in binary form must reproduce the above copyright
> > > + *       notice, this list of conditions and the following disclaimer in
> > > + *       the documentation and/or other materials provided with the
> > > + *       distribution.
> > > + *     * Neither the name of Intel Corporation nor the names of its
> > > + *       contributors may be used to endorse or promote products derived
> > > + *       from this software without specific prior written permission.
> > > + *
> > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS FOR
> > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > COPYRIGHT
> > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > INCIDENTAL,
> > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > NOT
> > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> > OF USE,
> > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> > ON ANY
> > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> > THE USE
> > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > > + */
> > > +
> > > +#ifndef _IXGBE_BIFFURCATE_H_
> > > +#define _IXGBE_BIFFURCATE_H_
> > > +
> > > +#ifdef __cplusplus
> > > +extern "C" {
> > > +#endif
> > > +
> > > +#define IXGBE_82599_MAX_RX_QUEUES 128
> > > +
> > > +#define RTE_PMD_PACKET_RING_SPLITOFF_LOWER_LIMIT 32
> > > +#define RTE_PMD_PACKET_MAX_RING_PAIRS
> > IXGBE_82599_MAX_RX_QUEUES
> > > +
> > > +
> > > +/**
> > > + * For use by the EAL only. Called as part of EAL init to set up any dummy NICs
> > > + * configured on command line.
> > > + */
> > > +int rte_ixgbe_bfc_pmd_init(const char *name, const char *params);
> > > +
> > > +#ifdef __cplusplus
> > > +}
> > > +#endif
> > > +
> > > +#endif
> > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > > index e240376..2d32907 100644
> > > --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > > +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > > @@ -100,6 +100,12 @@ rte_rxmbuf_alloc(struct rte_mempool *mp)
> > >  	return (m);
> > >  }
> > >
> > > +static inline uint16_t
> > > +ixgbe_dev_queue_offset(struct rte_eth_dev *dev)
> > > +{
> > > +	return (RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> > > +		0 : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx;
> > > +}
> > >
> > >  #if 1
> > >  #define RTE_PMD_USE_PREFETCH
> > > @@ -1726,6 +1732,17 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev
> > *dev,
> > >  			 unsigned int socket_id,
> > >  			 const struct rte_eth_txconf *tx_conf)
> > >  {
> > > +	uint16_t offset = ixgbe_dev_queue_offset(dev);
> > > +	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
> > > +				   nb_desc, socket_id, tx_conf);
> > > +}
> > > +
> > > +int
> > > +ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
> > > +		    uint16_t queue_idx, uint16_t offset,
> > > +		    uint16_t nb_desc, unsigned int socket_id,
> > > +		    const struct rte_eth_txconf *tx_conf)
> > > +{
> > >  	const struct rte_memzone *tz;
> > >  	struct igb_tx_queue *txq;
> > >  	struct ixgbe_hw     *hw;
> > > @@ -1849,8 +1866,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev
> > *dev,
> > >  	txq->hthresh = tx_conf->tx_thresh.hthresh;
> > >  	txq->wthresh = tx_conf->tx_thresh.wthresh;
> > >  	txq->queue_id = queue_idx;
> > > -	txq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> > > -		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
> > > +	txq->reg_idx  = queue_idx + offset;
> > >  	txq->port_id = dev->data->port_id;
> > >  	txq->txq_flags = tx_conf->txq_flags;
> > >  	txq->ops = &def_txq_ops;
> > > @@ -2083,6 +2099,18 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev
> > *dev,
> > >  			 const struct rte_eth_rxconf *rx_conf,
> > >  			 struct rte_mempool *mp)
> > >  {
> > > +	uint16_t offset = ixgbe_dev_queue_offset(dev);
> > > +	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
> > > +				   socket_id, rx_conf, mp);
> > > +}
> > > +
> > > +int
> > > +ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
> > > +		    uint16_t queue_idx, uint16_t offset,
> > > +		    uint16_t nb_desc, unsigned int socket_id,
> > > +		    const struct rte_eth_rxconf *rx_conf,
> > > +		    struct rte_mempool *mp)
> > > +{
> > >  	const struct rte_memzone *rz;
> > >  	struct igb_rx_queue *rxq;
> > >  	struct ixgbe_hw     *hw;
> > > @@ -2118,8 +2146,7 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev
> > *dev,
> > >  	rxq->nb_rx_desc = nb_desc;
> > >  	rxq->rx_free_thresh = rx_conf->rx_free_thresh;
> > >  	rxq->queue_id = queue_idx;
> > > -	rxq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> > > -		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
> > > +	rxq->reg_idx  =	queue_idx + offset;
> > >  	rxq->port_id = dev->data->port_id;
> > >  	rxq->crc_len = (uint8_t) ((dev->data->dev_conf.rxmode.hw_strip_crc) ?
> > >  							0 : ETHER_CRC_LEN);
> > > @@ -3402,9 +3429,9 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
> > >  	uint32_t fctrl;
> > >  	uint32_t hlreg0;
> > >  	uint32_t maxfrs;
> > > -	uint32_t srrctl;
> > >  	uint32_t rdrxctl;
> > >  	uint32_t rxcsum;
> > > +	uint32_t srrctl;
> > >  	uint16_t buf_size;
> > >  	uint16_t i;
> > >
> > > @@ -3684,9 +3711,9 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
> > >  	struct ixgbe_hw     *hw;
> > >  	struct igb_tx_queue *txq;
> > >  	struct igb_rx_queue *rxq;
> > > -	uint32_t txdctl;
> > >  	uint32_t dmatxctl;
> > >  	uint32_t rxctrl;
> > > +	uint32_t txdctl;
> > >  	uint16_t i;
> > >
> > >  	PMD_INIT_FUNC_TRACE();
> > > @@ -3731,7 +3758,6 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
> > >  	if (hw->mac.type == ixgbe_mac_82599EB &&
> > >  			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
> > >  		ixgbe_setup_loopback_link_82599(hw);
> > > -
> > >  }
> > >
> > >  /*
> > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > > index eb89715..aeffb5f 100644
> > > --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > > +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > > @@ -243,6 +243,16 @@ struct ixgbe_txq_ops {
> > >  			 IXGBE_ADVTXD_DCMD_DEXT |\
> > >  			 IXGBE_ADVTXD_DCMD_EOP)
> > >
> > > +int ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
> > > +			uint16_t queue_idx, uint16_t offset,
> > > +			uint16_t nb_desc, unsigned int socket_id,
> > > +			const struct rte_eth_txconf *tx_conf);
> > > +int ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
> > > +			uint16_t queue_idx, uint16_t offset,
> > > +			uint16_t nb_desc, unsigned int socket_id,
> > > +			const struct rte_eth_rxconf *rx_conf,
> > > +			struct rte_mempool *mp);
> > > +
> > >  #ifdef RTE_IXGBE_INC_VECTOR
> > >  uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
> > >  		uint16_t nb_pkts);
> > > --
> > > 1.8.1.4
> > >
Cunming Liang Nov. 26, 2014, 8:22 a.m. UTC | #4
Thanks Bruce's valuable comments.

> -----Original Message-----
> From: Richardson, Bruce
> Sent: Tuesday, November 25, 2014 11:01 PM
> To: Liang, Cunming
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device
> 
> On Tue, Nov 25, 2014 at 02:48:51PM +0000, Liang, Cunming wrote:
> >
> >
> > > -----Original Message-----
> > > From: Richardson, Bruce
> > > Sent: Tuesday, November 25, 2014 10:34 PM
> > > To: Liang, Cunming
> > > Cc: dev@dpdk.org
> > > Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net
> device
> > >
> > > On Tue, Nov 25, 2014 at 10:11:22PM +0800, Cunming Liang wrote:
> > > > Signed-off-by: Cunming Liang <cunming.liang@intel.com>
> > > > ---
> > > >  lib/librte_pmd_ixgbe/Makefile          |  13 +-
> > > >  lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303
> > > +++++++++++++++++++++++++++++++++
> > > >  lib/librte_pmd_ixgbe/ixgbe_bifurcate.h |  57 +++++++
> > > >  lib/librte_pmd_ixgbe/ixgbe_rxtx.c      |  40 ++++-
> > > >  lib/librte_pmd_ixgbe/ixgbe_rxtx.h      |  10 ++
> > > >  5 files changed, 415 insertions(+), 8 deletions(-)
> > > >  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > > >  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > > >
> > >
> > > These changes are the ones that I'm not too sure about. I'd prefer if all
> > > material for the bifurcated driver be kept within the librte_pmd_bifurc
> directory.
> > [Liang, Cunming] I haven't a librte_pmd_bifurc library.
> > So far the purpose of librte_bifurc is for device scan, not used as a pmd.
> > During driver probe, depend on device id, it asks for correct pmd from
> 'librte_pmd_ixgbe, librte_pmd_i40e'.
> >
> > > Is it possible to leave ixgbe largely unmodified and simply have the new
> > > bifurcated driver pull in the needed ixgbe (and later i40e) functions at
> > > compile time i.e. refer from one Makefile to the sources in the other
> > > driver's directory?
> > [Liang, Cunming] Nice point. If we have single directory gathering all direct ring
> access.
> > e.g. We have aka "librte_pmd_bifurc", inside it, we'll have bifurc_ixgbe,
> bifurc_i40e, ...
> > Each of them still depend on other libraries like
> librte_pmd_ixgbe/librte_pmd_i40e.
> > We may remove the internal dependence inside one pmd driver, but between
> libraries we add more.
> 
> I'm not sure about all that. Two points:
> 
> * Why would we need separate subdirectories within the bifurcated driver
> directory?
> The *only* thing that is different between an implementation of ixgbe and i40e
> to
> use the bifurcated driver infrastructure is the code to map between NIC
> descriptors
> and rte_mbufs. All the other code would be identical as far as I can work out. So
> the
> only two routines that differ are going to be the rx_burst and tx_burst functions.
[Liang, Cunming] Not really. If not using the fake page, we need to provide init/start/stop case by case.
> So why not just pull in those two specific functions (or sets of functions) from
> their respective drivers, and keep the rest of the codebase common? 

[Liang, Cunming] I'm not sure all the rest of codebase can be common.
For rx/tx or queue_setup, we know it can, we already do it in xxx_rxtx.c. For other ops, may not.
Even for the part we can, if we provide such common method template, it looks like we still need to register 'ops'.
(e.g. xxx_init_shared_code, xxx_dev_tx/rx_init, xxx_dev_rxtx_start) They're not part of eth_dev_ops.
If we consider more like enable all other DPDK ethdev API (by using ioctl like ethtools does).
These message wrap and translation are definitely the case to put into such common codes.

So I agree with the idea to put more common method into librte_bifurc.
But don't think it's good to make it as a common PMD driver.
I still prefer ixgbe_bifurc.c in librte_pmd_ixgbe as an independent driver.
Per codebase common, rxtx common stuffs already done in xxx_rxtx.c.
Other common method provides by librte_bifurc, be used by each specific PMD.

> simpler than having the ixgbe driver having to be aware of whether it's operating
> in bifurcated mode or uio/vfio/nic_uio mode, to check what operations are
> supported
> or not.
[Liang, Cunming] If you go through the codes. You'll find it's not ixgbe driver to aware of these modes.
We already have ixgbe driver and ixgbevf driver, now have ixgbe_bifurc driver, that's it.
BTW ideally, it's better for ixgbe and ixgbevf in self-contain .c files, now all are in ixgbe_ethdev.c
Ixgbe_bifurc  has weaker NIC control than ixgbevf, both are mainly focus on rx and tx.
Ixgbe has full HW control, ixgbevf has limited HW control, ixgbe_bifurc no HW control.
All of them has the same capability to do rx and tx.
On this point of view, it makes sense to have such standalone driver.
> 
> * It's not really an inter-library dependency - or at least not a hugely problematic
> one to my mind. With my proposal there is no need for the ixgbe or i40e drivers
> to
> be compiled up for the bifurcated driver to work with them. It simply makes use
> of the rx and tx code functions to do the mapping from descriptors to mbufs.
> While
> there will be a dependency on those functions, the nice thing is that those
> functions
> are already standardized by the ethdev API, so we don't need to worry about
> internal changes inside the drivers changing the APIs of those functions.
[Liang, Cunming] I think I haven't fully got your point.
Do you propose we don't need the specific PMD bifurc, instead to provide a driver directly on top of all other PMD ?
We expose more low level function to ethdev API as needed.
In this way, there's a risk that we assume kernel always guarantee the illegal register access only goes into the fake pages.
If not, such register access by normal PMD is un-expectable. 

> 
> /Bruce
> 
> 
> >
> > > My thinking is that the bifurcated driver is so significantly different in
> > > the way it works, and the limits on it's functionality e.g. no direct filter
> > > support or queue management, that it's best kept completely separate and
> only
> > > "borrow" the needed descriptor read/write functions from the other drivers
> as is
> > > needed.
> > >
> > > Just my 2c. I'm curious as to what others think.
> > >
> > > /Bruce
> > >
> > > > diff --git a/lib/librte_pmd_ixgbe/Makefile b/lib/librte_pmd_ixgbe/Makefile
> > > > index 3588047..6867f17 100644
> > > > --- a/lib/librte_pmd_ixgbe/Makefile
> > > > +++ b/lib/librte_pmd_ixgbe/Makefile
> > > > @@ -37,7 +37,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
> > > >  LIB = librte_pmd_ixgbe.a
> > > >
> > > >  CFLAGS += -O3
> > > > -CFLAGS += $(WERROR_FLAGS)
> > > > +CFLAGS += $(WERROR_FLAGS) -Wno-cast-qual
> > > >
> > > >  ifeq ($(CC), icc)
> > > >  #
> > > > @@ -108,10 +108,21 @@ SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) +=
> > > ixgbe_bypass.c
> > > >  SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c
> > > >  endif
> > > >
> > > > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
> > > > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> > > > +SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bifurcate.c
> > > > +endif
> > > > +endif
> > > >
> > > >  # this lib depends upon:
> > > >  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_eal
> > > lib/librte_ether
> > > >  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_mempool
> > > lib/librte_mbuf
> > > >  DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_net
> > > lib/librte_malloc
> > > > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
> > > > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> > > > +DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_bifurc
> > > > +endif
> > > > +endif
> > > > +
> > > >
> > > >  include $(RTE_SDK)/mk/rte.lib.mk
> > > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > > b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > > > new file mode 100644
> > > > index 0000000..84c445a
> > > > --- /dev/null
> > > > +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > > > @@ -0,0 +1,303 @@
> > > > +/*-
> > > > + *   BSD LICENSE
> > > > + *
> > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > + *   All rights reserved.
> > > > + *
> > > > + *   Redistribution and use in source and binary forms, with or without
> > > > + *   modification, are permitted provided that the following conditions
> > > > + *   are met:
> > > > + *
> > > > + *     * Redistributions of source code must retain the above copyright
> > > > + *       notice, this list of conditions and the following disclaimer.
> > > > + *     * Redistributions in binary form must reproduce the above copyright
> > > > + *       notice, this list of conditions and the following disclaimer in
> > > > + *       the documentation and/or other materials provided with the
> > > > + *       distribution.
> > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > + *       contributors may be used to endorse or promote products derived
> > > > + *       from this software without specific prior written permission.
> > > > + *
> > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > NOT
> > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> BUT
> > > NOT
> > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> LOSS
> > > OF USE,
> > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND
> > > ON ANY
> > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> OF
> > > THE USE
> > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > > + */
> > > > +
> > > > +#include <rte_eal.h>
> > > > +#include <rte_malloc.h>
> > > > +#include <rte_memzone.h>
> > > > +#include <rte_dev.h>
> > > > +#include <rte_pci.h>
> > > > +#include <rte_ethdev.h>
> > > > +#include <rte_kvargs.h>
> > > > +#include <rte_bifurc.h>
> > > > +
> > > > +#include <linux/if_ether.h>
> > > > +#include <linux/if_packet.h>
> > > > +#include <arpa/inet.h>
> > > > +#include <net/if.h>
> > > > +#include <sys/types.h>
> > > > +#include <sys/socket.h>
> > > > +#include <sys/ioctl.h>
> > > > +#include <sys/mman.h>
> > > > +#include <unistd.h>
> > > > +#include <poll.h>
> > > > +#include <errno.h>
> > > > +
> > > > +#include "ixgbe_logs.h"
> > > > +#include "ixgbe_ethdev.h"
> > > > +#include "ixgbe/ixgbe_api.h"
> > > > +
> > > > +#include <rte_mbuf.h>
> > > > +#include <rte_bifurc.h>
> > > > +#include "ixgbe_rxtx.h"
> > > > +
> > > > +static int
> > > > +ixgbe_dev_bfc_configure(struct rte_eth_dev *dev __rte_unused)
> > > > +{
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static void
> > > > +ixgbe_dev_bfc_info(struct rte_eth_dev *dev,
> > > > +		   struct rte_eth_dev_info *dev_info)
> > > > +{
> > > > +	rte_bifurc_ethdev_get_info(dev, dev_info);
> > > > +}
> > > > +
> > > > +static void
> > > > +ixgbe_dev_bfc_stats_get(__rte_unused struct rte_eth_dev *dev,
> > > > +			__rte_unused struct rte_eth_stats *igb_stats)
> > > > +{
> > > > +	return;
> > > > +}
> > > > +
> > > > +static int
> > > > +ixgbe_dev_bfc_start(struct rte_eth_dev *dev)
> > > > +{
> > > > +	int err;
> > > > +
> > > > +	/* initialize transmission unit */
> > > > +	ixgbe_dev_tx_init(dev);
> > > > +
> > > > +	/* This can fail when allocating mbufs for descriptor rings */
> > > > +	err = ixgbe_dev_rx_init(dev);
> > > > +	if (err) {
> > > > +		PMD_INIT_LOG(ERR, "Unable to initialize RX hardware\n");
> > > > +		goto error;
> > > > +	}
> > > > +
> > > > +	ixgbe_dev_rxtx_start(dev);
> > > > +
> > > > +	return 0;
> > > > +
> > > > +error:
> > > > +	PMD_INIT_LOG(ERR, "failure in ixgbe_dev_start(): %d", err);
> > > > +	ixgbe_dev_clear_queues(dev);
> > > > +	return -EIO;
> > > > +}
> > > > +
> > > > +static void
> > > > +ixgbe_dev_bfc_stop(struct rte_eth_dev *dev)
> > > > +{
> > > > +	unsigned i;
> > > > +
> > > > +	PMD_INIT_FUNC_TRACE();
> > > > +
> > > > +	for (i = 0; i < dev->data->nb_tx_queues; i++)
> > > > +		ixgbe_dev_tx_queue_stop(dev, i);
> > > > +
> > > > +	for (i = 0; i < dev->data->nb_rx_queues; i++)
> > > > +		ixgbe_dev_rx_queue_stop(dev, i);
> > > > +}
> > > > +
> > > > +static void
> > > > +ixgbe_dev_bfc_close(struct rte_eth_dev *dev)
> > > > +{
> > > > +	ixgbe_dev_bfc_stop(dev);
> > > > +
> > > > +	rte_bifurc_ethdev_free(dev);
> > > > +}
> > > > +
> > > > +static inline int
> > > > +rte_ixgbe_dev_atomic_write_link_status(struct rte_eth_dev *dev,
> > > > +				struct rte_eth_link *link)
> > > > +{
> > > > +	struct rte_eth_link *dst = &(dev->data->dev_link);
> > > > +	struct rte_eth_link *src = link;
> > > > +
> > > > +	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
> > > > +					*(uint64_t *)src) == 0)
> > > > +		return -1;
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int
> > > > +ixgbe_dev_bfc_link_update(__rte_unused struct rte_eth_dev *dev,
> > > > +			  __rte_unused int wait_to_complete)
> > > > +{
> > > > +	struct rte_eth_link link;
> > > > +
> > > > +	link.link_status = 1;
> > > > +	link.link_duplex = ETH_LINK_FULL_DUPLEX;
> > > > +	link.link_speed = ETH_LINK_SPEED_10000;
> > > > +
> > > > +	rte_ixgbe_dev_atomic_write_link_status(dev, &link);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int
> > > > +ixgbe_dev_bfc_rx_queue_setup(struct rte_eth_dev *dev,
> > > > +			 uint16_t queue_idx,
> > > > +			 uint16_t nb_desc,
> > > > +			 unsigned int socket_id,
> > > > +			 const struct rte_eth_rxconf *rx_conf,
> > > > +			 struct rte_mempool *mp)
> > > > +{
> > > > +	uint16_t offset = rte_bifurc_qp_base(dev);
> > > > +	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
> > > > +				   socket_id, rx_conf, mp);
> > > > +}
> > > > +
> > > > +static int
> > > > +ixgbe_dev_bfc_tx_queue_setup(struct rte_eth_dev *dev,
> > > > +			     uint16_t queue_idx,
> > > > +			     uint16_t nb_desc,
> > > > +			     unsigned int socket_id,
> > > > +			     const struct rte_eth_txconf *tx_conf)
> > > > +{
> > > > +	uint16_t offset = rte_bifurc_qp_base(dev);
> > > > +	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
> > > > +				   nb_desc, socket_id, tx_conf);
> > > > +}
> > > > +
> > > > +static struct eth_dev_ops ixgbe_bifurc_ops = {
> > > > +	.dev_start = ixgbe_dev_bfc_start,
> > > > +	.dev_stop = ixgbe_dev_bfc_stop,
> > > > +	.dev_close = ixgbe_dev_bfc_close,
> > > > +	.dev_configure = ixgbe_dev_bfc_configure,
> > > > +	.dev_infos_get = ixgbe_dev_bfc_info,
> > > > +	.rx_queue_setup = ixgbe_dev_bfc_rx_queue_setup,
> > > > +	.tx_queue_setup = ixgbe_dev_bfc_tx_queue_setup,
> > > > +	.rx_queue_release = ixgbe_dev_rx_queue_release,
> > > > +	.tx_queue_release = ixgbe_dev_tx_queue_release,
> > > > +	.link_update = ixgbe_dev_bfc_link_update,
> > > > +	.stats_get = ixgbe_dev_bfc_stats_get,
> > > > +	.stats_reset = NULL,
> > > > +};
> > > > +
> > > > +static int
> > > > +eth_ixgbe_bifurc_dev_init(struct eth_driver *eth_drv __rte_unused,
> > > > +			  struct rte_eth_dev *eth_dev)
> > > > +{
> > > > +	struct rte_pci_device *pci_dev;
> > > > +	struct ixgbe_hw *hw =
> > > > +		IXGBE_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
> > > > +	int diag;
> > > > +
> > > > +	PMD_INIT_FUNC_TRACE();
> > > > +
> > > > +	eth_dev->dev_ops = &ixgbe_bifurc_ops;
> > > > +	eth_dev->rx_pkt_burst = &ixgbe_recv_pkts;
> > > > +	eth_dev->tx_pkt_burst = &ixgbe_xmit_pkts;
> > > > +
> > > > +	/* for secondary processes, we don't initialise any further as primary
> > > > +	 * has already done this work. Only check we don't need a different
> > > > +	 * RX function */
> > > > +	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> > > > +		if (eth_dev->data->scattered_rx)
> > > > +			eth_dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
> > > > +		return 0;
> > > > +	}
> > > > +	pci_dev = eth_dev->pci_dev;
> > > > +
> > > > +	/* Vendor and Device ID need to be set before init of shared code */
> > > > +	hw->device_id = pci_dev->id.device_id;
> > > > +	hw->vendor_id = pci_dev->id.vendor_id;
> > > > +	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
> > > > +
> > > > +#ifdef RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP
> > > > +	hw->allow_unsupported_sfp = 1;
> > > > +#endif
> > > > +
> > > > +	/* Initialize the shared code (base driver) */
> > > > +#ifdef RTE_NIC_BYPASS
> > > > +	diag = ixgbe_bypass_init_shared_code(hw);
> > > > +#else
> > > > +	diag = ixgbe_init_shared_code(hw);
> > > > +#endif /* RTE_NIC_BYPASS */
> > > > +
> > > > +	if (diag != IXGBE_SUCCESS) {
> > > > +		PMD_INIT_LOG(ERR, "Shared code init failed: %d", diag);
> > > > +		return -EIO;
> > > > +	}
> > > > +
> > > > +	/* Allocate memory for storing MAC addresses */
> > > > +	eth_dev->data->mac_addrs = rte_zmalloc("ixgbe", ETHER_ADDR_LEN *
> > > > +			hw->mac.num_rar_entries, 0);
> > > > +	if (eth_dev->data->mac_addrs == NULL) {
> > > > +		PMD_INIT_LOG(ERR,
> > > > +			"Failed to allocate %u bytes needed to store "
> > > > +			"MAC addresses",
> > > > +			ETHER_ADDR_LEN * hw->mac.num_rar_entries);
> > > > +		return -ENOMEM;
> > > > +	}
> > > > +	rte_bifurc_mac_addr(eth_dev, &eth_dev->data->mac_addrs[0]);
> > > > +
> > > > +	return diag;
> > > > +}
> > > > +
> > > > +/*
> > > > + * The set of PCI devices this driver supports
> > > > + */
> > > > +static struct rte_pci_id pci_id_ixgbe_map[] = {
> > > > +
> > > > +#define RTE_PCI_DEV_ID_DECL_IXGBE(vend, dev) {RTE_PCI_DEVICE(vend,
> > > dev)},
> > > > +#define RTE_PCI_DEV_ID_DECL_IXGBEVF(vend, dev)
> {RTE_PCI_DEVICE(vend,
> > > dev)},
> > > > +#include "rte_pci_dev_ids.h"
> > > > +
> > > > +{ .vendor_id = 0, /* sentinel */ },
> > > > +};
> > > > +
> > > > +static struct eth_driver rte_ixgbe_bifurc_pmd = {
> > > > +	{
> > > > +		.name = "rte_ixgbe_bifurc_pmd",
> > > > +		.id_table = pci_id_ixgbe_map,
> > > > +		.drv_flags = RTE_PCI_DRV_NEED_MAPPING |
> > > > +			RTE_PCI_DRV_BIFURC,
> > > > +	},
> > > > +	.eth_dev_init = eth_ixgbe_bifurc_dev_init,
> > > > +	.dev_private_size = sizeof(struct ixgbe_adapter),
> > > > +};
> > > > +
> > > > +/*
> > > > + * Driver initialization routine.
> > > > + * Invoked once at EAL init time.
> > > > + * Register itself as the [Poll Mode] Driver of PCI IXGBE devices.
> > > > + */
> > > > +static int
> > > > +rte_ixgbe_bifurc_pmd_init(const char *name __rte_unused,
> > > > +			  const char *params __rte_unused)
> > > > +{
> > > > +	PMD_INIT_FUNC_TRACE();
> > > > +
> > > > +	rte_eth_driver_register(&rte_ixgbe_bifurc_pmd);
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static struct rte_driver rte_ixgbe_bifurc_driver = {
> > > > +	.type = PMD_PDEV,
> > > > +	.init = rte_ixgbe_bifurc_pmd_init,
> > > > +};
> > > > +
> > > > +PMD_REGISTER_DRIVER(rte_ixgbe_bifurc_driver);
> > > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > > b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > > > new file mode 100644
> > > > index 0000000..d40b21d
> > > > --- /dev/null
> > > > +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > > > @@ -0,0 +1,57 @@
> > > > +/*-
> > > > + *   BSD LICENSE
> > > > + *
> > > > + *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > > > + *   All rights reserved.
> > > > + *
> > > > + *   Redistribution and use in source and binary forms, with or without
> > > > + *   modification, are permitted provided that the following conditions
> > > > + *   are met:
> > > > + *
> > > > + *     * Redistributions of source code must retain the above copyright
> > > > + *       notice, this list of conditions and the following disclaimer.
> > > > + *     * Redistributions in binary form must reproduce the above copyright
> > > > + *       notice, this list of conditions and the following disclaimer in
> > > > + *       the documentation and/or other materials provided with the
> > > > + *       distribution.
> > > > + *     * Neither the name of Intel Corporation nor the names of its
> > > > + *       contributors may be used to endorse or promote products derived
> > > > + *       from this software without specific prior written permission.
> > > > + *
> > > > + *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > > CONTRIBUTORS
> > > > + *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > > NOT
> > > > + *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > > FITNESS FOR
> > > > + *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > > COPYRIGHT
> > > > + *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> > > INCIDENTAL,
> > > > + *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
> BUT
> > > NOT
> > > > + *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> LOSS
> > > OF USE,
> > > > + *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND
> > > ON ANY
> > > > + *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> > > > + *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> OF
> > > THE USE
> > > > + *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > > DAMAGE.
> > > > + */
> > > > +
> > > > +#ifndef _IXGBE_BIFFURCATE_H_
> > > > +#define _IXGBE_BIFFURCATE_H_
> > > > +
> > > > +#ifdef __cplusplus
> > > > +extern "C" {
> > > > +#endif
> > > > +
> > > > +#define IXGBE_82599_MAX_RX_QUEUES 128
> > > > +
> > > > +#define RTE_PMD_PACKET_RING_SPLITOFF_LOWER_LIMIT 32
> > > > +#define RTE_PMD_PACKET_MAX_RING_PAIRS
> > > IXGBE_82599_MAX_RX_QUEUES
> > > > +
> > > > +
> > > > +/**
> > > > + * For use by the EAL only. Called as part of EAL init to set up any dummy
> NICs
> > > > + * configured on command line.
> > > > + */
> > > > +int rte_ixgbe_bfc_pmd_init(const char *name, const char *params);
> > > > +
> > > > +#ifdef __cplusplus
> > > > +}
> > > > +#endif
> > > > +
> > > > +#endif
> > > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > > b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > > > index e240376..2d32907 100644
> > > > --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > > > +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> > > > @@ -100,6 +100,12 @@ rte_rxmbuf_alloc(struct rte_mempool *mp)
> > > >  	return (m);
> > > >  }
> > > >
> > > > +static inline uint16_t
> > > > +ixgbe_dev_queue_offset(struct rte_eth_dev *dev)
> > > > +{
> > > > +	return (RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> > > > +		0 : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx;
> > > > +}
> > > >
> > > >  #if 1
> > > >  #define RTE_PMD_USE_PREFETCH
> > > > @@ -1726,6 +1732,17 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev
> > > *dev,
> > > >  			 unsigned int socket_id,
> > > >  			 const struct rte_eth_txconf *tx_conf)
> > > >  {
> > > > +	uint16_t offset = ixgbe_dev_queue_offset(dev);
> > > > +	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
> > > > +				   nb_desc, socket_id, tx_conf);
> > > > +}
> > > > +
> > > > +int
> > > > +ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
> > > > +		    uint16_t queue_idx, uint16_t offset,
> > > > +		    uint16_t nb_desc, unsigned int socket_id,
> > > > +		    const struct rte_eth_txconf *tx_conf)
> > > > +{
> > > >  	const struct rte_memzone *tz;
> > > >  	struct igb_tx_queue *txq;
> > > >  	struct ixgbe_hw     *hw;
> > > > @@ -1849,8 +1866,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev
> > > *dev,
> > > >  	txq->hthresh = tx_conf->tx_thresh.hthresh;
> > > >  	txq->wthresh = tx_conf->tx_thresh.wthresh;
> > > >  	txq->queue_id = queue_idx;
> > > > -	txq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> > > > -		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx +
> queue_idx);
> > > > +	txq->reg_idx  = queue_idx + offset;
> > > >  	txq->port_id = dev->data->port_id;
> > > >  	txq->txq_flags = tx_conf->txq_flags;
> > > >  	txq->ops = &def_txq_ops;
> > > > @@ -2083,6 +2099,18 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev
> > > *dev,
> > > >  			 const struct rte_eth_rxconf *rx_conf,
> > > >  			 struct rte_mempool *mp)
> > > >  {
> > > > +	uint16_t offset = ixgbe_dev_queue_offset(dev);
> > > > +	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
> > > > +				   socket_id, rx_conf, mp);
> > > > +}
> > > > +
> > > > +int
> > > > +ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
> > > > +		    uint16_t queue_idx, uint16_t offset,
> > > > +		    uint16_t nb_desc, unsigned int socket_id,
> > > > +		    const struct rte_eth_rxconf *rx_conf,
> > > > +		    struct rte_mempool *mp)
> > > > +{
> > > >  	const struct rte_memzone *rz;
> > > >  	struct igb_rx_queue *rxq;
> > > >  	struct ixgbe_hw     *hw;
> > > > @@ -2118,8 +2146,7 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev
> > > *dev,
> > > >  	rxq->nb_rx_desc = nb_desc;
> > > >  	rxq->rx_free_thresh = rx_conf->rx_free_thresh;
> > > >  	rxq->queue_id = queue_idx;
> > > > -	rxq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
> > > > -		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx +
> queue_idx);
> > > > +	rxq->reg_idx  =	queue_idx + offset;
> > > >  	rxq->port_id = dev->data->port_id;
> > > >  	rxq->crc_len = (uint8_t) ((dev->data->dev_conf.rxmode.hw_strip_crc) ?
> > > >  							0 : ETHER_CRC_LEN);
> > > > @@ -3402,9 +3429,9 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
> > > >  	uint32_t fctrl;
> > > >  	uint32_t hlreg0;
> > > >  	uint32_t maxfrs;
> > > > -	uint32_t srrctl;
> > > >  	uint32_t rdrxctl;
> > > >  	uint32_t rxcsum;
> > > > +	uint32_t srrctl;
> > > >  	uint16_t buf_size;
> > > >  	uint16_t i;
> > > >
> > > > @@ -3684,9 +3711,9 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
> > > >  	struct ixgbe_hw     *hw;
> > > >  	struct igb_tx_queue *txq;
> > > >  	struct igb_rx_queue *rxq;
> > > > -	uint32_t txdctl;
> > > >  	uint32_t dmatxctl;
> > > >  	uint32_t rxctrl;
> > > > +	uint32_t txdctl;
> > > >  	uint16_t i;
> > > >
> > > >  	PMD_INIT_FUNC_TRACE();
> > > > @@ -3731,7 +3758,6 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
> > > >  	if (hw->mac.type == ixgbe_mac_82599EB &&
> > > >  			dev->data->dev_conf.lpbk_mode ==
> IXGBE_LPBK_82599_TX_RX)
> > > >  		ixgbe_setup_loopback_link_82599(hw);
> > > > -
> > > >  }
> > > >
> > > >  /*
> > > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > > b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > > > index eb89715..aeffb5f 100644
> > > > --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > > > +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
> > > > @@ -243,6 +243,16 @@ struct ixgbe_txq_ops {
> > > >  			 IXGBE_ADVTXD_DCMD_DEXT |\
> > > >  			 IXGBE_ADVTXD_DCMD_EOP)
> > > >
> > > > +int ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
> > > > +			uint16_t queue_idx, uint16_t offset,
> > > > +			uint16_t nb_desc, unsigned int socket_id,
> > > > +			const struct rte_eth_txconf *tx_conf);
> > > > +int ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
> > > > +			uint16_t queue_idx, uint16_t offset,
> > > > +			uint16_t nb_desc, unsigned int socket_id,
> > > > +			const struct rte_eth_rxconf *rx_conf,
> > > > +			struct rte_mempool *mp);
> > > > +
> > > >  #ifdef RTE_IXGBE_INC_VECTOR
> > > >  uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
> > > >  		uint16_t nb_pkts);
> > > > --
> > > > 1.8.1.4
> > > >
Bruce Richardson Nov. 26, 2014, 10:35 a.m. UTC | #5
On Wed, Nov 26, 2014 at 08:22:05AM +0000, Liang, Cunming wrote:
> Thanks Bruce's valuable comments.
> 
> > -----Original Message-----
> > From: Richardson, Bruce
> > Sent: Tuesday, November 25, 2014 11:01 PM
> > To: Liang, Cunming
> > Cc: dev@dpdk.org
> > Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device
> > 
> > On Tue, Nov 25, 2014 at 02:48:51PM +0000, Liang, Cunming wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Richardson, Bruce
> > > > Sent: Tuesday, November 25, 2014 10:34 PM
> > > > To: Liang, Cunming
> > > > Cc: dev@dpdk.org
> > > > Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net
> > device
> > > >
> > > > On Tue, Nov 25, 2014 at 10:11:22PM +0800, Cunming Liang wrote:
> > > > > Signed-off-by: Cunming Liang <cunming.liang@intel.com>
> > > > > ---
> > > > >  lib/librte_pmd_ixgbe/Makefile          |  13 +-
> > > > >  lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303
> > > > +++++++++++++++++++++++++++++++++
> > > > >  lib/librte_pmd_ixgbe/ixgbe_bifurcate.h |  57 +++++++
> > > > >  lib/librte_pmd_ixgbe/ixgbe_rxtx.c      |  40 ++++-
> > > > >  lib/librte_pmd_ixgbe/ixgbe_rxtx.h      |  10 ++
> > > > >  5 files changed, 415 insertions(+), 8 deletions(-)
> > > > >  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
> > > > >  create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
> > > > >
> > > >
> > > > These changes are the ones that I'm not too sure about. I'd prefer if all
> > > > material for the bifurcated driver be kept within the librte_pmd_bifurc
> > directory.
> > > [Liang, Cunming] I haven't a librte_pmd_bifurc library.
> > > So far the purpose of librte_bifurc is for device scan, not used as a pmd.
> > > During driver probe, depend on device id, it asks for correct pmd from
> > 'librte_pmd_ixgbe, librte_pmd_i40e'.
> > >
> > > > Is it possible to leave ixgbe largely unmodified and simply have the new
> > > > bifurcated driver pull in the needed ixgbe (and later i40e) functions at
> > > > compile time i.e. refer from one Makefile to the sources in the other
> > > > driver's directory?
> > > [Liang, Cunming] Nice point. If we have single directory gathering all direct ring
> > access.
> > > e.g. We have aka "librte_pmd_bifurc", inside it, we'll have bifurc_ixgbe,
> > bifurc_i40e, ...
> > > Each of them still depend on other libraries like
> > librte_pmd_ixgbe/librte_pmd_i40e.
> > > We may remove the internal dependence inside one pmd driver, but between
> > libraries we add more.
> > 
> > I'm not sure about all that. Two points:
> > 
> > * Why would we need separate subdirectories within the bifurcated driver
> > directory?
> > The *only* thing that is different between an implementation of ixgbe and i40e
> > to
> > use the bifurcated driver infrastructure is the code to map between NIC
> > descriptors
> > and rte_mbufs. All the other code would be identical as far as I can work out. So
> > the
> > only two routines that differ are going to be the rx_burst and tx_burst functions.
> [Liang, Cunming] Not really. If not using the fake page, we need to provide init/start/stop case by case.
> > So why not just pull in those two specific functions (or sets of functions) from
> > their respective drivers, and keep the rest of the codebase common? 
> 
> [Liang, Cunming] I'm not sure all the rest of codebase can be common.
> For rx/tx or queue_setup, we know it can, we already do it in xxx_rxtx.c. For other ops, may not.
> Even for the part we can, if we provide such common method template, it looks like we still need to register 'ops'.
> (e.g. xxx_init_shared_code, xxx_dev_tx/rx_init, xxx_dev_rxtx_start) They're not part of eth_dev_ops.
> If we consider more like enable all other DPDK ethdev API (by using ioctl like ethtools does).
> These message wrap and translation are definitely the case to put into such common codes.
> 
> So I agree with the idea to put more common method into librte_bifurc.
> But don't think it's good to make it as a common PMD driver.
> I still prefer ixgbe_bifurc.c in librte_pmd_ixgbe as an independent driver.
> Per codebase common, rxtx common stuffs already done in xxx_rxtx.c.
> Other common method provides by librte_bifurc, be used by each specific PMD.
> 
> > simpler than having the ixgbe driver having to be aware of whether it's operating
> > in bifurcated mode or uio/vfio/nic_uio mode, to check what operations are
> > supported
> > or not.
> [Liang, Cunming] If you go through the codes. You'll find it's not ixgbe driver to aware of these modes.
> We already have ixgbe driver and ixgbevf driver, now have ixgbe_bifurc driver, that's it.
> BTW ideally, it's better for ixgbe and ixgbevf in self-contain .c files, now all are in ixgbe_ethdev.c
> Ixgbe_bifurc  has weaker NIC control than ixgbevf, both are mainly focus on rx and tx.
> Ixgbe has full HW control, ixgbevf has limited HW control, ixgbe_bifurc no HW control.
> All of them has the same capability to do rx and tx.
> On this point of view, it makes sense to have such standalone driver.
> > 
> > * It's not really an inter-library dependency - or at least not a hugely problematic
> > one to my mind. With my proposal there is no need for the ixgbe or i40e drivers
> > to
> > be compiled up for the bifurcated driver to work with them. It simply makes use
> > of the rx and tx code functions to do the mapping from descriptors to mbufs.
> > While
> > there will be a dependency on those functions, the nice thing is that those
> > functions
> > are already standardized by the ethdev API, so we don't need to worry about
> > internal changes inside the drivers changing the APIs of those functions.
> [Liang, Cunming] I think I haven't fully got your point.
> Do you propose we don't need the specific PMD bifurc, instead to provide a driver directly on top of all other PMD ?
> We expose more low level function to ethdev API as needed.
> In this way, there's a risk that we assume kernel always guarantee the illegal register access only goes into the fake pages.
> If not, such register access by normal PMD is un-expectable. 
> 

My main thinking is that the ethdev HW APIs applicable to the bifurcated driver
are going to be very, very limited. Even the we can set up RX and TX queues
and perform RX and TX on them, but everything else, as far as I can see, is
going to be controlled externally via ethtool access to the kernel. Therefore, it
seems to me that an i40e device in bifurcated mode has much more in common with
an ixgbe device in bifurcated mode that with an i40e device being directly
controlled by DPDK. For these reasons I think a single driver for all bifurcated
drivers makes more sense.

However, without having prototyped such a scheme one cannot be sure if it will
really work, so I'm curious what other people think is the best approach to
producing such a driver.

/Bruce

> > 
> > /Bruce
> > 
> > 
> > >
> > > > My thinking is that the bifurcated driver is so significantly different in
> > > > the way it works, and the limits on it's functionality e.g. no direct filter
> > > > support or queue management, that it's best kept completely separate and
> > only
> > > > "borrow" the needed descriptor read/write functions from the other drivers
> > as is
> > > > needed.
> > > >
> > > > Just my 2c. I'm curious as to what others think.
> > > >
> > > > /Bruce
> > > >
diff mbox

Patch

diff --git a/lib/librte_pmd_ixgbe/Makefile b/lib/librte_pmd_ixgbe/Makefile
index 3588047..6867f17 100644
--- a/lib/librte_pmd_ixgbe/Makefile
+++ b/lib/librte_pmd_ixgbe/Makefile
@@ -37,7 +37,7 @@  include $(RTE_SDK)/mk/rte.vars.mk
 LIB = librte_pmd_ixgbe.a
 
 CFLAGS += -O3
-CFLAGS += $(WERROR_FLAGS)
+CFLAGS += $(WERROR_FLAGS) -Wno-cast-qual
 
 ifeq ($(CC), icc)
 #
@@ -108,10 +108,21 @@  SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bypass.c
 SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c
 endif
 
+ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bifurcate.c
+endif
+endif
 
 # this lib depends upon:
 DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_eal lib/librte_ether
 DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_mempool lib/librte_mbuf
 DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_net lib/librte_malloc
+ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y)
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_bifurc
+endif
+endif
+
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
new file mode 100644
index 0000000..84c445a
--- /dev/null
+++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c
@@ -0,0 +1,303 @@ 
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_eal.h>
+#include <rte_malloc.h>
+#include <rte_memzone.h>
+#include <rte_dev.h>
+#include <rte_pci.h>
+#include <rte_ethdev.h>
+#include <rte_kvargs.h>
+#include <rte_bifurc.h>
+
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <unistd.h>
+#include <poll.h>
+#include <errno.h>
+
+#include "ixgbe_logs.h"
+#include "ixgbe_ethdev.h"
+#include "ixgbe/ixgbe_api.h"
+
+#include <rte_mbuf.h>
+#include <rte_bifurc.h>
+#include "ixgbe_rxtx.h"
+
+static int
+ixgbe_dev_bfc_configure(struct rte_eth_dev *dev __rte_unused)
+{
+	return 0;
+}
+
+static void
+ixgbe_dev_bfc_info(struct rte_eth_dev *dev,
+		   struct rte_eth_dev_info *dev_info)
+{
+	rte_bifurc_ethdev_get_info(dev, dev_info);
+}
+
+static void
+ixgbe_dev_bfc_stats_get(__rte_unused struct rte_eth_dev *dev,
+			__rte_unused struct rte_eth_stats *igb_stats)
+{
+	return;
+}
+
+static int
+ixgbe_dev_bfc_start(struct rte_eth_dev *dev)
+{
+	int err;
+
+	/* initialize transmission unit */
+	ixgbe_dev_tx_init(dev);
+
+	/* This can fail when allocating mbufs for descriptor rings */
+	err = ixgbe_dev_rx_init(dev);
+	if (err) {
+		PMD_INIT_LOG(ERR, "Unable to initialize RX hardware\n");
+		goto error;
+	}
+
+	ixgbe_dev_rxtx_start(dev);
+
+	return 0;
+
+error:
+	PMD_INIT_LOG(ERR, "failure in ixgbe_dev_start(): %d", err);
+	ixgbe_dev_clear_queues(dev);
+	return -EIO;
+}
+
+static void
+ixgbe_dev_bfc_stop(struct rte_eth_dev *dev)
+{
+	unsigned i;
+
+	PMD_INIT_FUNC_TRACE();
+
+	for (i = 0; i < dev->data->nb_tx_queues; i++)
+		ixgbe_dev_tx_queue_stop(dev, i);
+
+	for (i = 0; i < dev->data->nb_rx_queues; i++)
+		ixgbe_dev_rx_queue_stop(dev, i);
+}
+
+static void
+ixgbe_dev_bfc_close(struct rte_eth_dev *dev)
+{
+	ixgbe_dev_bfc_stop(dev);
+
+	rte_bifurc_ethdev_free(dev);
+}
+
+static inline int
+rte_ixgbe_dev_atomic_write_link_status(struct rte_eth_dev *dev,
+				struct rte_eth_link *link)
+{
+	struct rte_eth_link *dst = &(dev->data->dev_link);
+	struct rte_eth_link *src = link;
+
+	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
+					*(uint64_t *)src) == 0)
+		return -1;
+
+	return 0;
+}
+
+static int
+ixgbe_dev_bfc_link_update(__rte_unused struct rte_eth_dev *dev,
+			  __rte_unused int wait_to_complete)
+{
+	struct rte_eth_link link;
+
+	link.link_status = 1;
+	link.link_duplex = ETH_LINK_FULL_DUPLEX;
+	link.link_speed = ETH_LINK_SPEED_10000;
+
+	rte_ixgbe_dev_atomic_write_link_status(dev, &link);
+
+	return 0;
+}
+
+static int
+ixgbe_dev_bfc_rx_queue_setup(struct rte_eth_dev *dev,
+			 uint16_t queue_idx,
+			 uint16_t nb_desc,
+			 unsigned int socket_id,
+			 const struct rte_eth_rxconf *rx_conf,
+			 struct rte_mempool *mp)
+{
+	uint16_t offset = rte_bifurc_qp_base(dev);
+	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
+				   socket_id, rx_conf, mp);
+}
+
+static int
+ixgbe_dev_bfc_tx_queue_setup(struct rte_eth_dev *dev,
+			     uint16_t queue_idx,
+			     uint16_t nb_desc,
+			     unsigned int socket_id,
+			     const struct rte_eth_txconf *tx_conf)
+{
+	uint16_t offset = rte_bifurc_qp_base(dev);
+	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
+				   nb_desc, socket_id, tx_conf);
+}
+
+static struct eth_dev_ops ixgbe_bifurc_ops = {
+	.dev_start = ixgbe_dev_bfc_start,
+	.dev_stop = ixgbe_dev_bfc_stop,
+	.dev_close = ixgbe_dev_bfc_close,
+	.dev_configure = ixgbe_dev_bfc_configure,
+	.dev_infos_get = ixgbe_dev_bfc_info,
+	.rx_queue_setup = ixgbe_dev_bfc_rx_queue_setup,
+	.tx_queue_setup = ixgbe_dev_bfc_tx_queue_setup,
+	.rx_queue_release = ixgbe_dev_rx_queue_release,
+	.tx_queue_release = ixgbe_dev_tx_queue_release,
+	.link_update = ixgbe_dev_bfc_link_update,
+	.stats_get = ixgbe_dev_bfc_stats_get,
+	.stats_reset = NULL,
+};
+
+static int
+eth_ixgbe_bifurc_dev_init(struct eth_driver *eth_drv __rte_unused,
+			  struct rte_eth_dev *eth_dev)
+{
+	struct rte_pci_device *pci_dev;
+	struct ixgbe_hw *hw =
+		IXGBE_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+	int diag;
+
+	PMD_INIT_FUNC_TRACE();
+
+	eth_dev->dev_ops = &ixgbe_bifurc_ops;
+	eth_dev->rx_pkt_burst = &ixgbe_recv_pkts;
+	eth_dev->tx_pkt_burst = &ixgbe_xmit_pkts;
+
+	/* for secondary processes, we don't initialise any further as primary
+	 * has already done this work. Only check we don't need a different
+	 * RX function */
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+		if (eth_dev->data->scattered_rx)
+			eth_dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
+		return 0;
+	}
+	pci_dev = eth_dev->pci_dev;
+
+	/* Vendor and Device ID need to be set before init of shared code */
+	hw->device_id = pci_dev->id.device_id;
+	hw->vendor_id = pci_dev->id.vendor_id;
+	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
+
+#ifdef RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP
+	hw->allow_unsupported_sfp = 1;
+#endif
+
+	/* Initialize the shared code (base driver) */
+#ifdef RTE_NIC_BYPASS
+	diag = ixgbe_bypass_init_shared_code(hw);
+#else
+	diag = ixgbe_init_shared_code(hw);
+#endif /* RTE_NIC_BYPASS */
+
+	if (diag != IXGBE_SUCCESS) {
+		PMD_INIT_LOG(ERR, "Shared code init failed: %d", diag);
+		return -EIO;
+	}
+
+	/* Allocate memory for storing MAC addresses */
+	eth_dev->data->mac_addrs = rte_zmalloc("ixgbe", ETHER_ADDR_LEN *
+			hw->mac.num_rar_entries, 0);
+	if (eth_dev->data->mac_addrs == NULL) {
+		PMD_INIT_LOG(ERR,
+			"Failed to allocate %u bytes needed to store "
+			"MAC addresses",
+			ETHER_ADDR_LEN * hw->mac.num_rar_entries);
+		return -ENOMEM;
+	}
+	rte_bifurc_mac_addr(eth_dev, &eth_dev->data->mac_addrs[0]);
+
+	return diag;
+}
+
+/*
+ * The set of PCI devices this driver supports
+ */
+static struct rte_pci_id pci_id_ixgbe_map[] = {
+
+#define RTE_PCI_DEV_ID_DECL_IXGBE(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
+#define RTE_PCI_DEV_ID_DECL_IXGBEVF(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
+#include "rte_pci_dev_ids.h"
+
+{ .vendor_id = 0, /* sentinel */ },
+};
+
+static struct eth_driver rte_ixgbe_bifurc_pmd = {
+	{
+		.name = "rte_ixgbe_bifurc_pmd",
+		.id_table = pci_id_ixgbe_map,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING |
+			RTE_PCI_DRV_BIFURC,
+	},
+	.eth_dev_init = eth_ixgbe_bifurc_dev_init,
+	.dev_private_size = sizeof(struct ixgbe_adapter),
+};
+
+/*
+ * Driver initialization routine.
+ * Invoked once at EAL init time.
+ * Register itself as the [Poll Mode] Driver of PCI IXGBE devices.
+ */
+static int
+rte_ixgbe_bifurc_pmd_init(const char *name __rte_unused,
+			  const char *params __rte_unused)
+{
+	PMD_INIT_FUNC_TRACE();
+
+	rte_eth_driver_register(&rte_ixgbe_bifurc_pmd);
+	return 0;
+}
+
+static struct rte_driver rte_ixgbe_bifurc_driver = {
+	.type = PMD_PDEV,
+	.init = rte_ixgbe_bifurc_pmd_init,
+};
+
+PMD_REGISTER_DRIVER(rte_ixgbe_bifurc_driver);
diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
new file mode 100644
index 0000000..d40b21d
--- /dev/null
+++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.h
@@ -0,0 +1,57 @@ 
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _IXGBE_BIFFURCATE_H_
+#define _IXGBE_BIFFURCATE_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define IXGBE_82599_MAX_RX_QUEUES 128
+
+#define RTE_PMD_PACKET_RING_SPLITOFF_LOWER_LIMIT 32
+#define RTE_PMD_PACKET_MAX_RING_PAIRS  IXGBE_82599_MAX_RX_QUEUES
+
+
+/**
+ * For use by the EAL only. Called as part of EAL init to set up any dummy NICs
+ * configured on command line.
+ */
+int rte_ixgbe_bfc_pmd_init(const char *name, const char *params);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index e240376..2d32907 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -100,6 +100,12 @@  rte_rxmbuf_alloc(struct rte_mempool *mp)
 	return (m);
 }
 
+static inline uint16_t
+ixgbe_dev_queue_offset(struct rte_eth_dev *dev)
+{
+	return (RTE_ETH_DEV_SRIOV(dev).active == 0) ?
+		0 : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx;
+}
 
 #if 1
 #define RTE_PMD_USE_PREFETCH
@@ -1726,6 +1732,17 @@  ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
 			 unsigned int socket_id,
 			 const struct rte_eth_txconf *tx_conf)
 {
+	uint16_t offset = ixgbe_dev_queue_offset(dev);
+	return ixgbe_dev_txq_setup(dev, queue_idx, offset,
+				   nb_desc, socket_id, tx_conf);
+}
+
+int
+ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
+		    uint16_t queue_idx, uint16_t offset,
+		    uint16_t nb_desc, unsigned int socket_id,
+		    const struct rte_eth_txconf *tx_conf)
+{
 	const struct rte_memzone *tz;
 	struct igb_tx_queue *txq;
 	struct ixgbe_hw     *hw;
@@ -1849,8 +1866,7 @@  ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
 	txq->hthresh = tx_conf->tx_thresh.hthresh;
 	txq->wthresh = tx_conf->tx_thresh.wthresh;
 	txq->queue_id = queue_idx;
-	txq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
-		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
+	txq->reg_idx  = queue_idx + offset;
 	txq->port_id = dev->data->port_id;
 	txq->txq_flags = tx_conf->txq_flags;
 	txq->ops = &def_txq_ops;
@@ -2083,6 +2099,18 @@  ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
 			 const struct rte_eth_rxconf *rx_conf,
 			 struct rte_mempool *mp)
 {
+	uint16_t offset = ixgbe_dev_queue_offset(dev);
+	return ixgbe_dev_rxq_setup(dev, queue_idx, offset, nb_desc,
+				   socket_id, rx_conf, mp);
+}
+
+int
+ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
+		    uint16_t queue_idx, uint16_t offset,
+		    uint16_t nb_desc, unsigned int socket_id,
+		    const struct rte_eth_rxconf *rx_conf,
+		    struct rte_mempool *mp)
+{
 	const struct rte_memzone *rz;
 	struct igb_rx_queue *rxq;
 	struct ixgbe_hw     *hw;
@@ -2118,8 +2146,7 @@  ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
 	rxq->nb_rx_desc = nb_desc;
 	rxq->rx_free_thresh = rx_conf->rx_free_thresh;
 	rxq->queue_id = queue_idx;
-	rxq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
-		queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
+	rxq->reg_idx  =	queue_idx + offset;
 	rxq->port_id = dev->data->port_id;
 	rxq->crc_len = (uint8_t) ((dev->data->dev_conf.rxmode.hw_strip_crc) ?
 							0 : ETHER_CRC_LEN);
@@ -3402,9 +3429,9 @@  ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 	uint32_t fctrl;
 	uint32_t hlreg0;
 	uint32_t maxfrs;
-	uint32_t srrctl;
 	uint32_t rdrxctl;
 	uint32_t rxcsum;
+	uint32_t srrctl;
 	uint16_t buf_size;
 	uint16_t i;
 
@@ -3684,9 +3711,9 @@  ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
 	struct ixgbe_hw     *hw;
 	struct igb_tx_queue *txq;
 	struct igb_rx_queue *rxq;
-	uint32_t txdctl;
 	uint32_t dmatxctl;
 	uint32_t rxctrl;
+	uint32_t txdctl;
 	uint16_t i;
 
 	PMD_INIT_FUNC_TRACE();
@@ -3731,7 +3758,6 @@  ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
 	if (hw->mac.type == ixgbe_mac_82599EB &&
 			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
 		ixgbe_setup_loopback_link_82599(hw);
-
 }
 
 /*
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
index eb89715..aeffb5f 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
@@ -243,6 +243,16 @@  struct ixgbe_txq_ops {
 			 IXGBE_ADVTXD_DCMD_DEXT |\
 			 IXGBE_ADVTXD_DCMD_EOP)
 
+int ixgbe_dev_txq_setup(struct rte_eth_dev *dev,
+			uint16_t queue_idx, uint16_t offset,
+			uint16_t nb_desc, unsigned int socket_id,
+			const struct rte_eth_txconf *tx_conf);
+int ixgbe_dev_rxq_setup(struct rte_eth_dev *dev,
+			uint16_t queue_idx, uint16_t offset,
+			uint16_t nb_desc, unsigned int socket_id,
+			const struct rte_eth_rxconf *rx_conf,
+			struct rte_mempool *mp);
+
 #ifdef RTE_IXGBE_INC_VECTOR
 uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
 		uint16_t nb_pkts);