[dpdk-dev,v3,1/6] ether: enhancement for VMDQ support
Commit Message
From: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
The change includes several parts:
1. Clear pool bitmap when trying to remove specific MAC.
2. Define RSS, DCB and VMDQ flags to combine rx_mq_mode.
3. Use 'struct' to replace 'union', which to expand the rx_adv_conf
arguments to better support RSS, DCB and VMDQ.
4. Fix bug in rte_eth_dev_config_restore function, which will restore
all MAC address to default pool.
5. Define additional 3 arguments for better VMDQ support.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
---
lib/librte_ether/rte_ethdev.c | 6 +++++-
lib/librte_ether/rte_ethdev.h | 41 ++++++++++++++++++++++++++++++-----------
2 files changed, 35 insertions(+), 12 deletions(-)
@@ -813,7 +813,8 @@ rte_eth_dev_config_restore(uint8_t port_id)
continue;
/* add address to the hardware */
- if (*dev->dev_ops->mac_addr_add)
+ if (*dev->dev_ops->mac_addr_add &&
+ dev->data->mac_pool_sel[i] & (1ULL << pool))
(*dev->dev_ops->mac_addr_add)(dev, &addr, i, pool);
else {
PMD_DEBUG_TRACE("port %d: MAC address array not supported\n",
@@ -2220,6 +2221,9 @@ rte_eth_dev_mac_addr_remove(uint8_t port_id, struct ether_addr *addr)
/* Update address in NIC data structure */
ether_addr_copy(&null_mac_addr, &dev->data->mac_addrs[index]);
+ /* reset pool bitmap */
+ dev->data->mac_pool_sel[index] = 0;
+
return 0;
}
@@ -253,20 +253,36 @@ struct rte_eth_thresh {
};
/**
+ * Simple flags are used for rte_eth_conf.rxmode.mq_mode.
+ */
+#define ETH_MQ_RX_RSS_FLAG 0x1
+#define ETH_MQ_RX_DCB_FLAG 0x2
+#define ETH_MQ_RX_VMDQ_FLAG 0x4
+
+/**
* A set of values to identify what method is to be used to route
* packets to multiple queues.
*/
enum rte_eth_rx_mq_mode {
- ETH_MQ_RX_NONE = 0, /**< None of DCB,RSS or VMDQ mode */
-
- ETH_MQ_RX_RSS, /**< For RX side, only RSS is on */
- ETH_MQ_RX_DCB, /**< For RX side,only DCB is on. */
- ETH_MQ_RX_DCB_RSS, /**< Both DCB and RSS enable */
-
- ETH_MQ_RX_VMDQ_ONLY, /**< Only VMDQ, no RSS nor DCB */
- ETH_MQ_RX_VMDQ_RSS, /**< RSS mode with VMDQ */
- ETH_MQ_RX_VMDQ_DCB, /**< Use VMDQ+DCB to route traffic to queues */
- ETH_MQ_RX_VMDQ_DCB_RSS, /**< Enable both VMDQ and DCB in VMDq */
+ /** None of DCB,RSS or VMDQ mode */
+ ETH_MQ_RX_NONE = 0,
+
+ /** For RX side, only RSS is on */
+ ETH_MQ_RX_RSS = ETH_MQ_RX_RSS_FLAG,
+ /** For RX side,only DCB is on. */
+ ETH_MQ_RX_DCB = ETH_MQ_RX_DCB_FLAG,
+ /** Both DCB and RSS enable */
+ ETH_MQ_RX_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG,
+
+ /** Only VMDQ, no RSS nor DCB */
+ ETH_MQ_RX_VMDQ_ONLY = ETH_MQ_RX_VMDQ_FLAG,
+ /** RSS mode with VMDQ */
+ ETH_MQ_RX_VMDQ_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_VMDQ_FLAG,
+ /** Use VMDQ+DCB to route traffic to queues */
+ ETH_MQ_RX_VMDQ_DCB = ETH_MQ_RX_VMDQ_FLAG | ETH_MQ_RX_DCB_FLAG,
+ /** Enable both VMDQ and DCB in VMDq */
+ ETH_MQ_RX_VMDQ_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG |
+ ETH_MQ_RX_VMDQ_FLAG,
};
/**
@@ -850,7 +866,7 @@ struct rte_eth_conf {
Read the datasheet of given ethernet controller
for details. The possible values of this field
are defined in implementation of each driver. */
- union {
+ struct {
struct rte_eth_rss_conf rss_conf; /**< Port RSS configuration */
struct rte_eth_vmdq_dcb_conf vmdq_dcb_conf;
/**< Port vmdq+dcb configuration. */
@@ -918,6 +934,9 @@ struct rte_eth_dev_info {
uint32_t tx_offload_capa; /**< Device TX offload capabilities. */
struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */
struct rte_eth_txconf default_txconf; /**< Default TX configuration */
+ uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */
+ uint16_t vmdq_queue_num; /**< Queue number for VMDQ pools. */
+ uint16_t vmdq_pool_base; /**< First ID of VMDQ pools. */
};
/** Maximum name length for extended statistics counters */