This patch cleans up some IXGBE base codes, such as remove unnecessary return statement,
and reduce goto statement etc.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
---
lib/librte_pmd_ixgbe/ixgbe/ixgbe_82598.c | 2 --
lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c | 7 +++----
lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c | 2 +-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h | 2 --
lib/librte_pmd_ixgbe/ixgbe/ixgbe_dcb_82598.c | 2 ++
lib/librte_pmd_ixgbe/ixgbe/ixgbe_dcb_82599.c | 1 +
lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c | 3 ++-
7 files changed, 9 insertions(+), 10 deletions(-)
@@ -1417,8 +1417,6 @@ STATIC void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
/* Setup Tx packet buffer sizes */
for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
-
- return;
}
/**
@@ -2103,7 +2103,7 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
if (status != IXGBE_SUCCESS) {
/* 82599 10GBASE-T requires an external PHY */
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
- goto out;
+ return status;
else
status = ixgbe_identify_module_generic(hw);
}
@@ -2111,14 +2111,13 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
/* Set PHY type none if no PHY detected */
if (hw->phy.type == ixgbe_phy_unknown) {
hw->phy.type = ixgbe_phy_none;
- status = IXGBE_SUCCESS;
+ return IXGBE_SUCCESS;
}
/* Return error if SFP module has been detected but is not supported */
if (hw->phy.type == ixgbe_phy_sfp_unsupported)
- status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
-out:
return status;
}
@@ -1060,7 +1060,7 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
hw->adapter_stopped = true;
/* Disable the receive unit */
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, 0);
+ ixgbe_disable_rx(hw);
/* Clear interrupt mask to stop interrupts from being generated */
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
@@ -41,9 +41,7 @@ POSSIBILITY OF SUCH DAMAGE.
IXGBE_WRITE_REG(hw, reg, (u32) value); \
IXGBE_WRITE_REG(hw, reg + 4, (u32) (value >> 32)); \
} while (0)
-#ifndef IXGBE_REMOVED
#define IXGBE_REMOVED(a) (0)
-#endif /* IXGBE_REMOVED */
struct ixgbe_pba {
u16 word[2];
u16 *pba_block;
@@ -347,6 +347,8 @@ s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, int link_speed,
u16 *refill, u16 *max, u8 *bwg_id,
u8 *tsa)
{
+ UNREFERENCED_1PARAMETER(link_speed);
+
ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, tsa);
ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max, bwg_id,
tsa);
@@ -580,6 +580,7 @@ s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, int link_speed,
u16 *refill, u16 *max, u8 *bwg_id, u8 *tsa,
u8 *map)
{
+ UNREFERENCED_1PARAMETER(link_speed);
ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id, tsa,
map);
@@ -1804,7 +1804,7 @@ STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
ack = ixgbe_get_i2c_data(&i2cctl);
usec_delay(1);
- if (ack == 0)
+ if (!ack)
break;
}
@@ -1886,6 +1886,7 @@ STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
return status;
}
+
/**
* ixgbe_raise_i2c_clk - Raises the I2C SCL clock
* @hw: pointer to hardware structure