mbox series

[00/11] Wanguxn NICs fixes and supports

Message ID 20230928094758.1076236-1-jiawenwu@trustnetic.com (mailing list archive)
Headers
Series Wanguxn NICs fixes and supports |

Message

Jiawen Wu Sept. 28, 2023, 9:47 a.m. UTC 
  Fix some bugs in txgbe/ngbe driver, and support new feature in
ngbe driver.

Jiawen Wu (11):
  net/txgbe: add Tx queue maximum limit
  net/txgbe: fix GRE tunnel packet checksum
  net/ngbe: fix to set flow control
  net/ngbe: prevent the NIC from slowing down link speed
  net/txgbe: reconfigure MAC Rx when link update
  net/ngbe: reconfigure MAC Rx when link update
  net/txgbe: fix to keep link down after device close
  net/ngbe: fix to keep link down after device close
  net/txgbe: check process type in close operation
  net/ngbe: check process type in close operation
  net/ngbe: add YT PHY fiber mode autoneg 100M support

 doc/guides/rel_notes/release_23_11.rst |   4 +
 drivers/net/ngbe/base/ngbe_phy_rtl.c   |   5 ++
 drivers/net/ngbe/base/ngbe_phy_yt.c    |  66 +++++++++++-----
 drivers/net/ngbe/base/ngbe_type.h      |  40 ++++++++++
 drivers/net/ngbe/ngbe_ethdev.c         | 102 ++++++++++++++++++++++++-
 drivers/net/txgbe/txgbe_ethdev.c       |  41 +++++++---
 drivers/net/txgbe/txgbe_ethdev.h       |   1 +
 drivers/net/txgbe/txgbe_ptypes.c       |  16 ----
 drivers/net/txgbe/txgbe_ptypes.h       |   5 ++
 drivers/net/txgbe/txgbe_rxtx.c         |  23 +++---
 10 files changed, 246 insertions(+), 57 deletions(-)

Comments

Ferruh Yigit Sept. 29, 2023, 1:33 p.m. UTC | #1 
On 9/28/2023 10:47 AM, Jiawen Wu wrote:
> Fix some bugs in txgbe/ngbe driver, and support new feature in
> ngbe driver.
> 
> Jiawen Wu (11):
>   net/txgbe: add Tx queue maximum limit
>   net/txgbe: fix GRE tunnel packet checksum
>   net/ngbe: fix to set flow control
>   net/ngbe: prevent the NIC from slowing down link speed
>   net/txgbe: reconfigure MAC Rx when link update
>   net/ngbe: reconfigure MAC Rx when link update
>   net/txgbe: fix to keep link down after device close
>   net/ngbe: fix to keep link down after device close
>   net/txgbe: check process type in close operation
>   net/ngbe: check process type in close operation
>   net/ngbe: add YT PHY fiber mode autoneg 100M support
> 

Series applied to dpdk-next-net/main, thanks.