mbox series

[v3,0/8] Introduce support for RISC-V architecture

Message ID 20220510154849.530872-1-kda@semihalf.com (mailing list archive)
Headers
Series Introduce support for RISC-V architecture |

Message

Stanislaw Kardach May 10, 2022, 3:48 p.m. UTC
This patchset adds support for building and running DPDK on 64bit RISC-V
architecture. The initial support targets rv64gc (rv64imafdc) ISA and
was tested on SiFive Unmatched development board with the Freedom U740
SoC running Linux (freedom-u-sdk based kernel).
I have tested this codebase using DPDK unit and perf tests as well as
test-pmd, l2fwd and l3fwd examples.
The NIC attached to the DUT was Intel X520-DA2 which uses ixgbe PMD.
On the UIO side, since U740 does not have an IOMMU, I've used igb_uio,
uio_pci_generic and vfio-pci noiommu drivers.

Functional verification done using meson tests. fast-tests suite passing with
the default config.

PMD verification done using a Intel x520-DA2 NIC (ixgbe) and the test-pmd
application. Packet transfer checked using all UIO drivers available for
non-IOMMU platforms: uio_pci_generic, vfio-pci noiommu and igb_uio.

The i40e PMD driver is disabled on RISC-V as the rv64gc ISA has no vector
operations.

RISCV support is currently limited to Linux as the time measurement frequency
discovery is tied to reading a device-tree node via procfs.

Clang compilation currently not supported due to issues with missing relocation
relaxation.

Commit 1 introduces EAL and build system support for RISC-V architecture
   as well as documentation updates.
Commits 2-5 add missing defines and stubs to enable RISC-V operation in
   non-EAL parts.
Commit 6 adds RISC-V specific cpuflags test.
Commits 7-8 add RISC-V build testing to test-meson-builds.sh and github CI.

I appreciate Your comments and feedback.

Best Regards,
Stanislaw Kardach

v3:
  - Limit test-meson-builds.sh testing to a generic rv64gc configuration.
    Previous version was missing this change by mistake.
v2:
  - Separate bug-fixes into separate series.
  - Prevent RV64_CSRR leak to API users.
  - Limit test-meson-builds.sh testing to a generic rv64gc configuration.
  - Clean-up release notes and fix style issues.


Michal Mazurek (2):
  eal: add initial support for RISC-V architecture
  test/cpuflags: add test for RISC-V cpu flag

Stanislaw Kardach (6):
  net/ixgbe: enable vector stubs for RISC-V
  net/memif: set memfd syscall ID on RISC-V
  net/tap: set BPF syscall ID for RISC-V
  examples/l3fwd: enable RISC-V operation
  devtools: add RISC-V to test-meson-builds.sh
  ci: add RISCV64 cross compilation job

---
NOTE: I have added maintainers for each commit based on MAINTAINERS file.
   However some modules (l3fwd, net/tap and cpuflags unit tests) do not have
   any maintainers assigned, hence I've targeted dev@dpdk.org mailing list as
   if it was a commit adding new files.

 .ci/linux-build.sh                            |   4 +
 .github/workflows/build.yml                   |  11 +-
 MAINTAINERS                                   |   6 +
 app/test/test_cpuflags.c                      |  81 ++++++++++
 app/test/test_xmmt_ops.h                      |  16 ++
 config/meson.build                            |   2 +
 config/riscv/meson.build                      | 143 ++++++++++++++++++
 config/riscv/riscv64_linux_gcc                |  17 +++
 config/riscv/riscv64_sifive_u740_linux_gcc    |  19 +++
 devtools/test-meson-builds.sh                 |   4 +
 doc/guides/contributing/design.rst            |   2 +-
 .../linux_gsg/cross_build_dpdk_for_riscv.rst  | 125 +++++++++++++++
 doc/guides/linux_gsg/index.rst                |   1 +
 doc/guides/nics/features.rst                  |   5 +
 doc/guides/nics/features/default.ini          |   1 +
 doc/guides/nics/features/ixgbe.ini            |   1 +
 doc/guides/rel_notes/release_22_07.rst        |   8 +
 drivers/net/i40e/meson.build                  |   6 +
 drivers/net/ixgbe/ixgbe_rxtx.c                |   4 +-
 drivers/net/memif/rte_eth_memif.h             |   2 +
 drivers/net/tap/tap_bpf.h                     |   2 +
 examples/l3fwd/l3fwd_em.c                     |   8 +
 examples/l3fwd/l3fwd_fib.c                    |   2 +
 lib/eal/riscv/include/meson.build             |  23 +++
 lib/eal/riscv/include/rte_atomic.h            |  52 +++++++
 lib/eal/riscv/include/rte_byteorder.h         |  44 ++++++
 lib/eal/riscv/include/rte_cpuflags.h          |  55 +++++++
 lib/eal/riscv/include/rte_cycles.h            | 105 +++++++++++++
 lib/eal/riscv/include/rte_io.h                |  21 +++
 lib/eal/riscv/include/rte_mcslock.h           |  18 +++
 lib/eal/riscv/include/rte_memcpy.h            |  63 ++++++++
 lib/eal/riscv/include/rte_pause.h             |  31 ++++
 lib/eal/riscv/include/rte_pflock.h            |  17 +++
 lib/eal/riscv/include/rte_power_intrinsics.h  |  22 +++
 lib/eal/riscv/include/rte_prefetch.h          |  50 ++++++
 lib/eal/riscv/include/rte_rwlock.h            |  44 ++++++
 lib/eal/riscv/include/rte_spinlock.h          |  67 ++++++++
 lib/eal/riscv/include/rte_ticketlock.h        |  21 +++
 lib/eal/riscv/include/rte_vect.h              |  55 +++++++
 lib/eal/riscv/meson.build                     |  11 ++
 lib/eal/riscv/rte_cpuflags.c                  | 122 +++++++++++++++
 lib/eal/riscv/rte_cycles.c                    |  77 ++++++++++
 lib/eal/riscv/rte_hypervisor.c                |  13 ++
 lib/eal/riscv/rte_power_intrinsics.c          |  56 +++++++
 meson.build                                   |   2 +
 45 files changed, 1435 insertions(+), 4 deletions(-)
 create mode 100644 config/riscv/meson.build
 create mode 100644 config/riscv/riscv64_linux_gcc
 create mode 100644 config/riscv/riscv64_sifive_u740_linux_gcc
 create mode 100644 doc/guides/linux_gsg/cross_build_dpdk_for_riscv.rst
 create mode 100644 lib/eal/riscv/include/meson.build
 create mode 100644 lib/eal/riscv/include/rte_atomic.h
 create mode 100644 lib/eal/riscv/include/rte_byteorder.h
 create mode 100644 lib/eal/riscv/include/rte_cpuflags.h
 create mode 100644 lib/eal/riscv/include/rte_cycles.h
 create mode 100644 lib/eal/riscv/include/rte_io.h
 create mode 100644 lib/eal/riscv/include/rte_mcslock.h
 create mode 100644 lib/eal/riscv/include/rte_memcpy.h
 create mode 100644 lib/eal/riscv/include/rte_pause.h
 create mode 100644 lib/eal/riscv/include/rte_pflock.h
 create mode 100644 lib/eal/riscv/include/rte_power_intrinsics.h
 create mode 100644 lib/eal/riscv/include/rte_prefetch.h
 create mode 100644 lib/eal/riscv/include/rte_rwlock.h
 create mode 100644 lib/eal/riscv/include/rte_spinlock.h
 create mode 100644 lib/eal/riscv/include/rte_ticketlock.h
 create mode 100644 lib/eal/riscv/include/rte_vect.h
 create mode 100644 lib/eal/riscv/meson.build
 create mode 100644 lib/eal/riscv/rte_cpuflags.c
 create mode 100644 lib/eal/riscv/rte_cycles.c
 create mode 100644 lib/eal/riscv/rte_hypervisor.c
 create mode 100644 lib/eal/riscv/rte_power_intrinsics.c