[V3,1/7] app/testpmd: fix forward lcores number when DCB test
Checks
Commit Message
Currently, 'nb_fwd_lcores' value are both adjusted based on
'nb_fwd_streams' in rss/simple/icmp_echo_fwd_config_setup.
But the operation is missing in dcb_fwd_config_setup, which
may lead to a bad behavior in which multiple polling threads
operate on the same queue. In this case, the device sends and
receives packets, causing unexpected results. The procedure is
as follows:
1/ run testpmd with "--rxq=8 --txq=8"
2/ port stop all
3/ set nbcore 8
4/ port config 0 dcb vt off 4 pfc on
5/ port config all rxq 16
6/ port config all txq 16
7/ port start all
8/ set fwd mac
9/ start
For the DCB forwarding test, each core is assigned to each
traffic class and each core is assigned a multi-stream.
Therefore, 'nb_fwd_lcores' value needs to be adjusted based
on 'total_tc_num' in all forwarding ports.
Fixes: 900550de04a7 ("app/testpmd: add dcb support")
Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
---
app/test-pmd/config.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
Comments
> -----Original Message-----
> From: Huisong Li <lihuisong@huawei.com>
> Sent: Tuesday, April 20, 2021 17:01
> To: dev@dpdk.org
> Cc: Yigit, Ferruh <ferruh.yigit@intel.com>; Li, Xiaoyun <xiaoyun.li@intel.com>;
> linuxarm@openeuler.org; lihuisong@huawei.com
> Subject: [PATCH V3 1/7] app/testpmd: fix forward lcores number when DCB test
>
> Currently, 'nb_fwd_lcores' value are both adjusted based on 'nb_fwd_streams' in
> rss/simple/icmp_echo_fwd_config_setup.
> But the operation is missing in dcb_fwd_config_setup, which may lead to a bad
> behavior in which multiple polling threads operate on the same queue. In this
> case, the device sends and receives packets, causing unexpected results. The
> procedure is as follows:
> 1/ run testpmd with "--rxq=8 --txq=8"
> 2/ port stop all
> 3/ set nbcore 8
> 4/ port config 0 dcb vt off 4 pfc on
> 5/ port config all rxq 16
> 6/ port config all txq 16
> 7/ port start all
> 8/ set fwd mac
> 9/ start
>
Same as v2 comment.
Please check that.
> For the DCB forwarding test, each core is assigned to each traffic class and each
> core is assigned a multi-stream.
> Therefore, 'nb_fwd_lcores' value needs to be adjusted based on 'total_tc_num'
> in all forwarding ports.
>
> Fixes: 900550de04a7 ("app/testpmd: add dcb support")
> Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
> Cc: stable@dpdk.org
>
> Signed-off-by: Huisong Li <lihuisong@huawei.com>
> Signed-off-by: Lijun Ou <oulijun@huawei.com>
> ---
> app/test-pmd/config.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index
> ccb9bd3..03ee40c 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -2961,6 +2961,21 @@ rss_fwd_config_setup(void)
> }
> }
>
> +static uint16_t
> +get_fwd_port_total_tc_num(void)
> +{
> + struct rte_eth_dcb_info dcb_info;
> + uint16_t total_tc_num = 0;
> + unsigned int i;
> +
> + for (i = 0; i < nb_fwd_ports; i++) {
> + (void)rte_eth_dev_get_dcb_info(fwd_ports_ids[i], &dcb_info);
> + total_tc_num += dcb_info.nb_tcs;
> + }
> +
> + return total_tc_num;
> +}
> +
> /**
> * For the DCB forwarding test, each core is assigned on each traffic class.
> *
> @@ -2980,12 +2995,16 @@ dcb_fwd_config_setup(void)
> lcoreid_t lc_id;
> uint16_t nb_rx_queue, nb_tx_queue;
> uint16_t i, j, k, sm_id = 0;
> + uint16_t total_tc_num;
> uint8_t tc = 0;
>
> cur_fwd_config.nb_fwd_lcores = (lcoreid_t) nb_fwd_lcores;
> cur_fwd_config.nb_fwd_ports = nb_fwd_ports;
> cur_fwd_config.nb_fwd_streams =
> (streamid_t) (nb_rxq * cur_fwd_config.nb_fwd_ports);
> + total_tc_num = get_fwd_port_total_tc_num();
> + if (cur_fwd_config.nb_fwd_lcores > total_tc_num)
> + cur_fwd_config.nb_fwd_lcores = total_tc_num;
>
> /* reinitialize forwarding streams */
> init_fwd_streams();
> --
> 2.7.4
@@ -2961,6 +2961,21 @@ rss_fwd_config_setup(void)
}
}
+static uint16_t
+get_fwd_port_total_tc_num(void)
+{
+ struct rte_eth_dcb_info dcb_info;
+ uint16_t total_tc_num = 0;
+ unsigned int i;
+
+ for (i = 0; i < nb_fwd_ports; i++) {
+ (void)rte_eth_dev_get_dcb_info(fwd_ports_ids[i], &dcb_info);
+ total_tc_num += dcb_info.nb_tcs;
+ }
+
+ return total_tc_num;
+}
+
/**
* For the DCB forwarding test, each core is assigned on each traffic class.
*
@@ -2980,12 +2995,16 @@ dcb_fwd_config_setup(void)
lcoreid_t lc_id;
uint16_t nb_rx_queue, nb_tx_queue;
uint16_t i, j, k, sm_id = 0;
+ uint16_t total_tc_num;
uint8_t tc = 0;
cur_fwd_config.nb_fwd_lcores = (lcoreid_t) nb_fwd_lcores;
cur_fwd_config.nb_fwd_ports = nb_fwd_ports;
cur_fwd_config.nb_fwd_streams =
(streamid_t) (nb_rxq * cur_fwd_config.nb_fwd_ports);
+ total_tc_num = get_fwd_port_total_tc_num();
+ if (cur_fwd_config.nb_fwd_lcores > total_tc_num)
+ cur_fwd_config.nb_fwd_lcores = total_tc_num;
/* reinitialize forwarding streams */
init_fwd_streams();