test_plans: add ethertype flow to fdir
diff mbox series

Message ID 1595492760-4039-1-git-send-email-yuan.peng@intel.com
State Accepted
Headers show
Series
  • test_plans: add ethertype flow to fdir
Related show

Commit Message

Peng, Yuan July 23, 2020, 8:26 a.m. UTC
add ethertype flow to cvl fdir
add IPV6 pattern to conflict rule case.

Signed-off-by: Peng Yuan <yuan.peng@intel.com>

Comments

Tu, Lijuan July 24, 2020, 1:31 a.m. UTC | #1
Applied, thanks

> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Peng Yuan
> Sent: 2020年7月23日 16:26
> To: dts@dpdk.org
> Cc: Peng, Yuan <yuan.peng@intel.com>
> Subject: [dts] [PATCH]test_plans: add ethertype flow to fdir
> 
> add ethertype flow to cvl fdir
> add IPV6 pattern to conflict rule case.
> 
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
> 
> diff --git a/test_plans/cvl_fdir_test_plan.rst b/test_plans/cvl_fdir_test_plan.rst
> index 63ad6f2..c1b9223 100644
> --- a/test_plans/cvl_fdir_test_plan.rst
> +++ b/test_plans/cvl_fdir_test_plan.rst
> @@ -37,6 +37,7 @@ CVL:Classification:Flow Director  Enable fdir filter for
> IPv4/IPv6 + TCP/UDP/SCTP  (OS default package)  Enable fdir filter for UDP
> tunnel: Vxlan / NVGRE (OS default package)  Enable fdir filter for GTP (comm #1
> package)
> +Enable fdir filter for L2 Ethertype (comm #1 package)
> 
>  Pattern and input set
>  ---------------------
> @@ -81,6 +82,8 @@ Pattern and input set
>      +------------------------------+----------------------------+--------------------------------
> -----------------------------------------------+
>      |                              | MAC_IPV4_GTPU_EH           | [TEID], [QFI]
> |
>      +------------------------------+----------------------------+--------------------------------
> -----------------------------------------------+
> +    | L2 Ethertype                 |      L2 Ethertype          | [Ethertype]
> |
> +
> + +------------------------------+----------------------------+---------
> + ----------------------------------------------------------------------
> + +
> 
>  .. note::
> 
> @@ -131,7 +134,7 @@ Prerequisites
> 
>  5. Launch the app ``testpmd`` with the following arguments::
> 
> -    ./testpmd -c 0xff -n 6 -w 86:00.0,,flow-mark-support=1 -- -i --portmask=0xff -
> -rxq=64 --txq=64 --port-topology=loop
> +    ./testpmd -c 0xff -n 6 -w 86:00.0,,flow-mark-support=1
> + --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64
> + --port-topology=loop
>      testpmd> set fwd rxonly
>      testpmd> set verbose 1
> 
> @@ -142,7 +145,7 @@ Prerequisites
> 
>     Notes: if need two ports environment, launch ``testpmd`` with the following
> arguments::
> 
> -    ./testpmd -c 0xff -n 6 -w 86:00.0,flow-mark-support=1 -w 86:00.1,flow-
> mark-support=1 -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
> +    ./testpmd -c 0xff -n 6 -w 86:00.0,flow-mark-support=1 -w
> + 86:00.1,flow-mark-support=1 --log-level="ice,7" -- -i --portmask=0xff
> + --rxq=64 --txq=64 --port-topology=loop
> 
> 
>  Default parameters
> @@ -185,6 +188,9 @@ Default parameters
>      [TEID]: 0x12345678
>      [QFI]: 0x34
> 
> +   L2 Ethertype::
> +
> +    [Ethertype]: 0x8863 0x8864 0x0806 0x8100 0x88f7
> 
>  Send packets
>  ------------
> @@ -440,6 +446,32 @@ Send packets
>      p_gtpu14 = Ether(src="a4:bf:01:51:27:ca",
> dst="00:11:22:33:44:55")/IP(src="192.168.0.20",
> dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255,
> teid=0x12345678)/IPv6()/SCTP()/Raw('x'*20)
>      p_gtpu15 = Ether(src="a4:bf:01:51:27:ca",
> dst="00:11:22:33:44:55")/IP(src="192.168.0.20",
> dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255,
> teid=0x1234567)/IP()/Raw('x'*20)
> 
> +* L2 Ethertype
> +
> +   PPPoED packets::
> +
> +    sendp([Ether(dst="00:11:22:33:44:55")/PPPoED()/PPP()/IP()/Raw('x'
> *80)],iface="enp134s0f1")
> +    sendp([Ether(dst="00:11:22:33:44:55", type=0x8863)/IP()/Raw('x' *
> + 80)],iface="enp134s0f1")
> +
> +   PPPoE packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/PPPoE()/PPP(proto=0x0021)/IP()/Raw('x'
> * 80)],iface="enp134s0f1")
> +    sendp([Ether(dst="00:11:22:33:44:55", type=0x8864)/IP()/Raw('x' *
> + 80)],iface="enp134s0f1")
> +
> +   ARP packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/ARP(pdst="192.168.1.1")],iface="enp134
> s0f1")
> +    sendp([Ether(dst="00:11:22:33:44:55", type=0x0806)/Raw('x'
> + *80)],iface="enp134s0f1")
> +
> +   EAPS packets::
> +
> +    sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)],iface="enp134s0f1")
> +
> + sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)],iface="enp134s0f1
> + ")
> +
> +   ieee1588 packet::
> +
> +    sendp([Ether(dst="00:11:22:33:44:55",type=0x88f7)/"\\x00\\x02"],
> + iface="enp134s0f1")
> +
> 
>  Test case: flow validation
>  ==========================
> @@ -1705,6 +1737,175 @@ Subcase 6: MAC_IPV4_GTPU mark  2. repeat the
> steps of passthru in subcase 3,
>     get the same result.
> 
> +Test case: L2 Ethertype pattern
> +===============================
> +
> +Subcase 1: L2 Ethertype queue index
> +-----------------------------------
> +
> +1. create rule for PPPoED::
> +
> +    flow create 0 ingress pattern eth type is 0x8863 / end actions
> + queue index 1 / mark id 1 / end
> +
> +   send PPPoED packet,
> +   check the packets are distributed to expected queue with specific FDIR
> matched ID.
> +
> +2. create rule for PPPoE::
> +
> +    flow create 0 ingress pattern eth type is 0x8864 / end actions
> + queue index 2 / mark id 2 / end
> +
> +   send PPPoE packet,
> +   check the packets are distributed to expected queue with specific FDIR
> matched ID.
> +
> +3. create rule for ARP::
> +
> +    flow create 0 ingress pattern eth type is 0x0806 / end actions
> + queue index 3 / mark id 3 / end
> +
> +   send ARP packet,
> +   Check the packets are distributed to expected queue with specific FDIR
> matched ID.
> +
> +4. create rule for EAPS::
> +
> +    flow create 0 ingress pattern eth type is 0x8100 / end actions
> + queue index 4 / mark id 4 / end
> +
> +   send EAPS packet,
> +   check the packets are distributed to expected queue with specific FDIR
> matched ID.
> +
> +5. create rule for ieee1588::
> +
> +    flow create 0 ingress pattern eth type is 0x88f7 / end actions
> + queue index 5 / mark id 5 / end
> +
> +   send ieee1588 packet,
> +   check the packets are distributed to expected queue with specific FDIR
> matched ID.
> +
> +6. send a mismatched packet::
> +
> +
> + sendp([Ether(dst="00:11:22:33:44:55",type=0x8847)],iface="enp134s0f1")
> +
> +   check the packet received has not FDIR matched ID.
> +
> +7. verify rules can be listed and destroyed::
> +
> +    testpmd> flow list 0
> +
> +   check the 5 rules listed.
> +   flush all the rules::
> +
> +    testpmd> flow flush 0
> +
> +8. verify matched packets are received without FDIR matched ID.
> +   Then check there is no rule listed.
> +
> +Subcase 2: L2 Ethertype rss queues
> +----------------------------------
> +
> +1. create rules for PPPoED with rss queues action::
> +
> +    flow create 0 ingress pattern eth type is 0x8863 / end actions rss
> + queues 2 3 end / mark id 2 / end
> +
> +2. send matched packet,
> +   check the packets received have FDIR matched ID=0x2,
> +   the packets are directed to queue 0,
> +   because L2 Ethertype are not supported by RSS.
> +
> +3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
> +   get the same result.
> +
> +4. repeat step 6-7 of subcase 1.
> +
> +5. verify matched packets received have not FDIR matched ID.
> +   Then check there is no rule listed.
> +
> +Subcase 3: L2 Ethertype passthru
> +--------------------------------
> +
> +1. create rules for PPPoED with passthru action::
> +
> +    flow create 0 ingress pattern eth type is 0x8863 / end actions
> + passthru / mark id 2 / end
> +
> +2. send matched packet,
> +   check the packets received have FDIR matched ID=0x2,
> +   the packets are directed to queue 0,
> +   because L2 Ethertype are not supported by RSS.
> +
> +3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
> +   get the same result.
> +
> +4. repeat step 6-7 of subcase 1.
> +
> +5. verify matched packets received have not FDIR matched ID.
> +   Then check there is no rule listed.
> +
> +Subcase 4: L2 Ethertype drop
> +----------------------------
> +
> +1. create rules for PPPoED with drop action::
> +
> +    flow create 0 ingress pattern eth type is 0x8863 / end actions drop
> + / end
> +
> +2. send matched packet,
> +   check the packets are dropped,
> +
> +3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
> +   get the same result.
> +
> +4. repeat step 6-7 of subcase 1.
> +
> +5. verify matched packets are received.
> +   Then check there is no rule listed.
> +
> +Subcase 5: L2 Ethertype mark+rss
> +--------------------------------
> +
> +1. create rules for PPPoED with rss queues action::
> +
> +    flow create 0 ingress pattern eth type is 0x8863 / end actions mark
> + id 1 / rss / end
> +
> +2. send matched packet,
> +   check the packets received have FDIR matched ID=0x1,
> +   the packets are directed to queue 0,
> +   because L2 Ethertype are not supported by RSS.
> +
> +3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
> +   get the same result.
> +
> +4. repeat step 6-7 of subcase 1.
> +
> +5. verify matched packets received have not FDIR matched ID.
> +   Then check there is no rule listed.
> +
> +Subcase 6: L2 Ethertype mark
> +----------------------------
> +
> +1. create rules for PPPoED with mark action::
> +
> +    flow create 0 ingress pattern eth type is 0x8863 / end actions mark
> + / end
> +
> +2. send matched packet,
> +   check the packets received have FDIR matched ID=0x0,
> +
> +3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
> +   get the same result.
> +
> +4. repeat step 6-7 of subcase 1.
> +
> +5. verify matched packets received have not FDIR matched ID.
> +   Then check there is no rule listed.
> +
> +Subcase 7: unsupported Ethertype
> +--------------------------------
> +
> +1. create rules for IP/IPV6::
> +
> +    flow create 0 ingress pattern eth type is 0x0800 / end actions queue index 1 /
> end
> +    flow create 0 ingress pattern eth type is 0x86dd / end actions
> + queue index 1 / end
> +
> +   the two rules can be created successfully, but report below message::
> +
> +    ice_flow_create(): Succeeded to create (2) flow
> +    Flow rule #0 created
> +
> +   the number "2" stands for switch rule, fdir doesn't support IPV4/IPV6
> ethertype.
> 
>  Test case: negative cases
>  =========================
> @@ -1812,6 +2013,7 @@ Subcase 6: conflicted rules  1. Create a FDIR rule::
> 
>      flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is
> 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
> +    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6
> + dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end
> + actions queue index 1 / mark / end
> 
>     the rule is created successfully.
> 
> @@ -1821,12 +2023,17 @@ Subcase 6: conflicted rules
>      flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is
> 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions drop / end
>      flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is
> 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 3 / mark / end
>      flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is
> 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / udp src is 22 dst is 23 / end
> actions queue index 3 / mark / end
> +    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions queue
> index 2 / mark / end
> +    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions rss
> queues 2 3 end / mark / end
> +    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6 dst is
> CDCD:910A:2222:5498:8475:1111:3900:2021 / end actions mark / end
> +    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6
> + dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / udp
> + src is 22 dst is 23 / end actions queue index 1 / mark / end
> 
>     Failed to create the two flows, report message::
> 
> -    first two rules:
>      Rule already exists!: File exists
> -    last two rules:
> +
> +   or::
> +
>      Invalid input action number: Invalid argument
> 
>  3. check there is only one rule listed.
> --
> 2.7.4

Patch
diff mbox series

diff --git a/test_plans/cvl_fdir_test_plan.rst b/test_plans/cvl_fdir_test_plan.rst
index 63ad6f2..c1b9223 100644
--- a/test_plans/cvl_fdir_test_plan.rst
+++ b/test_plans/cvl_fdir_test_plan.rst
@@ -37,6 +37,7 @@  CVL:Classification:Flow Director
 Enable fdir filter for IPv4/IPv6 + TCP/UDP/SCTP  (OS default package)
 Enable fdir filter for UDP tunnel: Vxlan / NVGRE (OS default package)
 Enable fdir filter for GTP (comm #1 package)
+Enable fdir filter for L2 Ethertype (comm #1 package)
 
 Pattern and input set
 ---------------------
@@ -81,6 +82,8 @@  Pattern and input set
     +------------------------------+----------------------------+-------------------------------------------------------------------------------+
     |                              | MAC_IPV4_GTPU_EH           | [TEID], [QFI]                                                                 |
     +------------------------------+----------------------------+-------------------------------------------------------------------------------+
+    | L2 Ethertype                 |      L2 Ethertype          | [Ethertype]                                                                   |
+    +------------------------------+----------------------------+-------------------------------------------------------------------------------+
 
 .. note::
 
@@ -131,7 +134,7 @@  Prerequisites
 
 5. Launch the app ``testpmd`` with the following arguments::
 
-    ./testpmd -c 0xff -n 6 -w 86:00.0,,flow-mark-support=1 -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+    ./testpmd -c 0xff -n 6 -w 86:00.0,,flow-mark-support=1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
     testpmd> set fwd rxonly
     testpmd> set verbose 1
 
@@ -142,7 +145,7 @@  Prerequisites
 
    Notes: if need two ports environment, launch ``testpmd`` with the following arguments::
 
-    ./testpmd -c 0xff -n 6 -w 86:00.0,flow-mark-support=1 -w 86:00.1,flow-mark-support=1 -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+    ./testpmd -c 0xff -n 6 -w 86:00.0,flow-mark-support=1 -w 86:00.1,flow-mark-support=1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
 
 
 Default parameters
@@ -185,6 +188,9 @@  Default parameters
     [TEID]: 0x12345678
     [QFI]: 0x34
 
+   L2 Ethertype::
+
+    [Ethertype]: 0x8863 0x8864 0x0806 0x8100 0x88f7
 
 Send packets
 ------------
@@ -440,6 +446,32 @@  Send packets
     p_gtpu14 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x12345678)/IPv6()/SCTP()/Raw('x'*20)
     p_gtpu15 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP(src="192.168.0.20", dst="192.168.0.21")/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x1234567)/IP()/Raw('x'*20)
 
+* L2 Ethertype
+
+   PPPoED packets::
+
+    sendp([Ether(dst="00:11:22:33:44:55")/PPPoED()/PPP()/IP()/Raw('x' *80)],iface="enp134s0f1")
+    sendp([Ether(dst="00:11:22:33:44:55", type=0x8863)/IP()/Raw('x' * 80)],iface="enp134s0f1")
+
+   PPPoE packets::
+
+    sendp([Ether(dst="00:11:22:33:44:55")/PPPoE()/PPP(proto=0x0021)/IP()/Raw('x' * 80)],iface="enp134s0f1")
+    sendp([Ether(dst="00:11:22:33:44:55", type=0x8864)/IP()/Raw('x' * 80)],iface="enp134s0f1")
+
+   ARP packets::
+
+    sendp([Ether(dst="00:11:22:33:44:55")/ARP(pdst="192.168.1.1")],iface="enp134s0f1")
+    sendp([Ether(dst="00:11:22:33:44:55", type=0x0806)/Raw('x' *80)],iface="enp134s0f1")
+
+   EAPS packets::
+
+    sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)],iface="enp134s0f1")
+    sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)],iface="enp134s0f1")
+
+   ieee1588 packet::
+
+    sendp([Ether(dst="00:11:22:33:44:55",type=0x88f7)/"\\x00\\x02"], iface="enp134s0f1")
+
 
 Test case: flow validation
 ==========================
@@ -1705,6 +1737,175 @@  Subcase 6: MAC_IPV4_GTPU mark
 2. repeat the steps of passthru in subcase 3,
    get the same result.
 
+Test case: L2 Ethertype pattern
+===============================
+
+Subcase 1: L2 Ethertype queue index
+-----------------------------------
+
+1. create rule for PPPoED::
+
+    flow create 0 ingress pattern eth type is 0x8863 / end actions queue index 1 / mark id 1 / end
+
+   send PPPoED packet,
+   check the packets are distributed to expected queue with specific FDIR matched ID.
+
+2. create rule for PPPoE::
+
+    flow create 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / mark id 2 / end
+
+   send PPPoE packet,
+   check the packets are distributed to expected queue with specific FDIR matched ID.
+
+3. create rule for ARP::
+
+    flow create 0 ingress pattern eth type is 0x0806 / end actions queue index 3 / mark id 3 / end
+
+   send ARP packet,
+   Check the packets are distributed to expected queue with specific FDIR matched ID.
+
+4. create rule for EAPS::
+
+    flow create 0 ingress pattern eth type is 0x8100 / end actions queue index 4 / mark id 4 / end
+
+   send EAPS packet,
+   check the packets are distributed to expected queue with specific FDIR matched ID.
+
+5. create rule for ieee1588::
+
+    flow create 0 ingress pattern eth type is 0x88f7 / end actions queue index 5 / mark id 5 / end
+
+   send ieee1588 packet,
+   check the packets are distributed to expected queue with specific FDIR matched ID.
+
+6. send a mismatched packet::
+
+    sendp([Ether(dst="00:11:22:33:44:55",type=0x8847)],iface="enp134s0f1")
+
+   check the packet received has not FDIR matched ID.
+
+7. verify rules can be listed and destroyed::
+
+    testpmd> flow list 0
+
+   check the 5 rules listed.
+   flush all the rules::
+
+    testpmd> flow flush 0
+
+8. verify matched packets are received without FDIR matched ID.
+   Then check there is no rule listed.
+
+Subcase 2: L2 Ethertype rss queues
+----------------------------------
+
+1. create rules for PPPoED with rss queues action::
+
+    flow create 0 ingress pattern eth type is 0x8863 / end actions rss queues 2 3 end / mark id 2 / end
+
+2. send matched packet,
+   check the packets received have FDIR matched ID=0x2,
+   the packets are directed to queue 0,
+   because L2 Ethertype are not supported by RSS.
+
+3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
+   get the same result.
+
+4. repeat step 6-7 of subcase 1.
+
+5. verify matched packets received have not FDIR matched ID.
+   Then check there is no rule listed.
+
+Subcase 3: L2 Ethertype passthru
+--------------------------------
+
+1. create rules for PPPoED with passthru action::
+
+    flow create 0 ingress pattern eth type is 0x8863 / end actions passthru / mark id 2 / end
+
+2. send matched packet,
+   check the packets received have FDIR matched ID=0x2,
+   the packets are directed to queue 0,
+   because L2 Ethertype are not supported by RSS.
+
+3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
+   get the same result.
+
+4. repeat step 6-7 of subcase 1.
+
+5. verify matched packets received have not FDIR matched ID.
+   Then check there is no rule listed.
+
+Subcase 4: L2 Ethertype drop
+----------------------------
+
+1. create rules for PPPoED with drop action::
+
+    flow create 0 ingress pattern eth type is 0x8863 / end actions drop / end
+
+2. send matched packet,
+   check the packets are dropped,
+
+3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
+   get the same result.
+
+4. repeat step 6-7 of subcase 1.
+
+5. verify matched packets are received.
+   Then check there is no rule listed.
+
+Subcase 5: L2 Ethertype mark+rss
+--------------------------------
+
+1. create rules for PPPoED with rss queues action::
+
+    flow create 0 ingress pattern eth type is 0x8863 / end actions mark id 1 / rss / end
+
+2. send matched packet,
+   check the packets received have FDIR matched ID=0x1,
+   the packets are directed to queue 0,
+   because L2 Ethertype are not supported by RSS.
+
+3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
+   get the same result.
+
+4. repeat step 6-7 of subcase 1.
+
+5. verify matched packets received have not FDIR matched ID.
+   Then check there is no rule listed.
+
+Subcase 6: L2 Ethertype mark
+----------------------------
+
+1. create rules for PPPoED with mark action::
+
+    flow create 0 ingress pattern eth type is 0x8863 / end actions mark / end
+
+2. send matched packet,
+   check the packets received have FDIR matched ID=0x0,
+
+3. Repeat step 1-2 with PPPoE/ARP/EAPS/ieee1588,
+   get the same result.
+
+4. repeat step 6-7 of subcase 1.
+
+5. verify matched packets received have not FDIR matched ID.
+   Then check there is no rule listed.
+
+Subcase 7: unsupported Ethertype
+--------------------------------
+
+1. create rules for IP/IPV6::
+
+    flow create 0 ingress pattern eth type is 0x0800 / end actions queue index 1 / end
+    flow create 0 ingress pattern eth type is 0x86dd / end actions queue index 1 / end
+
+   the two rules can be created successfully, but report below message::
+
+    ice_flow_create(): Succeeded to create (2) flow
+    Flow rule #0 created
+
+   the number "2" stands for switch rule, fdir doesn't support IPV4/IPV6 ethertype.
 
 Test case: negative cases
 =========================
@@ -1812,6 +2013,7 @@  Subcase 6: conflicted rules
 1. Create a FDIR rule::
 
     flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
+    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions queue index 1 / mark / end
 
    the rule is created successfully.
 
@@ -1821,12 +2023,17 @@  Subcase 6: conflicted rules
     flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions drop / end
     flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 3 / mark / end
     flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / udp src is 22 dst is 23 / end actions queue index 3 / mark / end
+    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions queue index 2 / mark / end
+    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / end actions rss queues 2 3 end / mark / end
+    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2021 / end actions mark / end
+    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end
 
    Failed to create the two flows, report message::
 
-    first two rules:
     Rule already exists!: File exists
-    last two rules:
+
+   or::
+
     Invalid input action number: Invalid argument
 
 3. check there is only one rule listed.