[v7,2/2] app/testpmd: add send scheduling test capability

Message ID 1594384782-17799-2-git-send-email-viacheslavo@mellanox.com (mailing list archive)
State Accepted, archived
Delegated to: Ferruh Yigit
Headers
Series [v7,1/2] mbuf: introduce accurate packet Tx scheduling |

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/travis-robot success Travis build: passed
ci/Intel-compilation success Compilation OK

Commit Message

Slava Ovsiienko July 10, 2020, 12:39 p.m. UTC
  This commit adds testpmd capability to provide timestamps on the packets
being sent in the txonly mode. This includes:

 - SEND_ON_TIMESTAMP support
   new device Tx offload capability support added, example:

     testpmd> port config 0 tx_offload send_on_timestamp on

 - set txtimes, registers field and flag, example:

     testpmd> set txtimes 1000000,0

   This command enables the packet send scheduling on timestamps if
   the first parameter is not zero, generic format:

     testpmd> set txtimes (inter),(intra)

   where:

     inter - is the delay between the bursts in the device clock units.
     If "intra" (next parameter) is zero, this is the time between the
     beginnings of the first packets in the neighbour bursts, if "intra"
     is not zero, "inter" specifies the time between the beginning of the
     first packet of the current burst and the beginning of the last packet
     of the previous burst. If "inter"parameter is zero the send scheduling
     on timestamps is disabled (default).

     intra - is the delay between the packets within the burst specified
     in the device clock units. The number of packets in the burst is
     defined by regular burst setting. If "intra" parameter is zero no
     timestamps provided in the packets excepting  the first one in
     the burst.

     As the result the bursts of packet will be transmitted with
     specific delay between the packets within the burst and specific
     delay between the bursts. The rte_eth_read_clock() is supposed to be
     engaged to get the current device clock value and provide
     the reference for the timestamps. If there is no supported
     rte_eth_read_clock() there will be no provided send scheduling
     on the device.

 - show txtimes, displays the timing settings
 - txonly burst time pattern

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
 app/test-pmd/cmdline.c                      | 63 ++++++++++++++++++++--
 app/test-pmd/config.c                       | 61 +++++++++++++++++++++
 app/test-pmd/testpmd.c                      |  6 +++
 app/test-pmd/testpmd.h                      |  4 ++
 app/test-pmd/txonly.c                       | 83 +++++++++++++++++++++++++++--
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 38 ++++++++++++-
 6 files changed, 246 insertions(+), 9 deletions(-)
  

Patch

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 39ad938..def0709 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -294,6 +294,10 @@  static void cmd_help_long_parsed(void *parsed_result,
 			" Right now only applicable for CSUM and TXONLY"
 			" modes\n\n"
 
+			"set txtimes (x, y)\n"
+			"    Set the scheduling on timestamps"
+			" timings for the TXOMLY mode\n\n"
+
 			"set corelist (x[,y]*)\n"
 			"    Set the list of forwarding cores.\n\n"
 
@@ -3930,6 +3934,52 @@  struct cmd_set_txsplit_result {
 	},
 };
 
+/* *** SET TIMES FOR TXONLY PACKETS SCHEDULING ON TIMESTAMPS *** */
+
+struct cmd_set_txtimes_result {
+	cmdline_fixed_string_t cmd_keyword;
+	cmdline_fixed_string_t txtimes;
+	cmdline_fixed_string_t tx_times;
+};
+
+static void
+cmd_set_txtimes_parsed(void *parsed_result,
+		       __rte_unused struct cmdline *cl,
+		       __rte_unused void *data)
+{
+	struct cmd_set_txtimes_result *res;
+	unsigned int tx_times[2] = {0, 0};
+	unsigned int n_times;
+
+	res = parsed_result;
+	n_times = parse_item_list(res->tx_times, "tx times",
+				  2, tx_times, 0);
+	if (n_times == 2)
+		set_tx_pkt_times(tx_times);
+}
+
+cmdline_parse_token_string_t cmd_set_txtimes_keyword =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_txtimes_result,
+				 cmd_keyword, "set");
+cmdline_parse_token_string_t cmd_set_txtimes_name =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_txtimes_result,
+				 txtimes, "txtimes");
+cmdline_parse_token_string_t cmd_set_txtimes_value =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_txtimes_result,
+				 tx_times, NULL);
+
+cmdline_parse_inst_t cmd_set_txtimes = {
+	.f = cmd_set_txtimes_parsed,
+	.data = NULL,
+	.help_str = "set txtimes <inter_burst>,<intra_burst>",
+	.tokens = {
+		(void *)&cmd_set_txtimes_keyword,
+		(void *)&cmd_set_txtimes_name,
+		(void *)&cmd_set_txtimes_value,
+		NULL,
+	},
+};
+
 /* *** ADD/REMOVE ALL VLAN IDENTIFIERS TO/FROM A PORT VLAN RX FILTER *** */
 struct cmd_rx_vlan_filter_all_result {
 	cmdline_fixed_string_t rx_vlan;
@@ -7418,6 +7468,8 @@  static void cmd_showcfg_parsed(void *parsed_result,
 		pkt_fwd_config_display(&cur_fwd_config);
 	else if (!strcmp(res->what, "txpkts"))
 		show_tx_pkt_segments();
+	else if (!strcmp(res->what, "txtimes"))
+		show_tx_pkt_times();
 }
 
 cmdline_parse_token_string_t cmd_showcfg_show =
@@ -7426,12 +7478,12 @@  static void cmd_showcfg_parsed(void *parsed_result,
 	TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, cfg, "config");
 cmdline_parse_token_string_t cmd_showcfg_what =
 	TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, what,
-				 "rxtx#cores#fwd#txpkts");
+				 "rxtx#cores#fwd#txpkts#txtimes");
 
 cmdline_parse_inst_t cmd_showcfg = {
 	.f = cmd_showcfg_parsed,
 	.data = NULL,
-	.help_str = "show config rxtx|cores|fwd|txpkts",
+	.help_str = "show config rxtx|cores|fwd|txpkts|txtimes",
 	.tokens = {
 		(void *)&cmd_showcfg_show,
 		(void *)&cmd_showcfg_port,
@@ -18670,7 +18722,8 @@  struct cmd_config_per_port_tx_offload_result {
 			  "sctp_cksum#tcp_tso#udp_tso#outer_ipv4_cksum#"
 			  "qinq_insert#vxlan_tnl_tso#gre_tnl_tso#"
 			  "ipip_tnl_tso#geneve_tnl_tso#macsec_insert#"
-			  "mt_lockfree#multi_segs#mbuf_fast_free#security");
+			  "mt_lockfree#multi_segs#mbuf_fast_free#security#"
+			  "send_on_timestamp");
 cmdline_parse_token_string_t cmd_config_per_port_tx_offload_result_on_off =
 	TOKEN_STRING_INITIALIZER
 		(struct cmd_config_per_port_tx_offload_result,
@@ -18755,7 +18808,8 @@  struct cmd_config_per_port_tx_offload_result {
 		    "sctp_cksum|tcp_tso|udp_tso|outer_ipv4_cksum|"
 		    "qinq_insert|vxlan_tnl_tso|gre_tnl_tso|"
 		    "ipip_tnl_tso|geneve_tnl_tso|macsec_insert|"
-		    "mt_lockfree|multi_segs|mbuf_fast_free|security on|off",
+		    "mt_lockfree|multi_segs|mbuf_fast_free|security|"
+		    "send_on_timestamp on|off",
 	.tokens = {
 		(void *)&cmd_config_per_port_tx_offload_result_port,
 		(void *)&cmd_config_per_port_tx_offload_result_config,
@@ -19427,6 +19481,7 @@  struct cmd_showport_macs_result {
 	(cmdline_parse_inst_t *)&cmd_set_log,
 	(cmdline_parse_inst_t *)&cmd_set_txpkts,
 	(cmdline_parse_inst_t *)&cmd_set_txsplit,
+	(cmdline_parse_inst_t *)&cmd_set_txtimes,
 	(cmdline_parse_inst_t *)&cmd_set_fwd_list,
 	(cmdline_parse_inst_t *)&cmd_set_fwd_mask,
 	(cmdline_parse_inst_t *)&cmd_set_fwd_mode,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 53a9b97..48a8790 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1046,6 +1046,15 @@  static int bus_match_all(const struct rte_bus *bus, const void *data)
 			printf("off\n");
 	}
 
+	if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP) {
+		printf("Tx scheduling on timestamp:    ");
+		if (ports[port_id].dev_conf.txmode.offloads &
+		    DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP)
+			printf("on\n");
+		else
+			printf("off\n");
+	}
+
 }
 
 int
@@ -3067,6 +3076,58 @@  struct igb_ring_desc_16_bytes {
 }
 
 void
+show_tx_pkt_times(void)
+{
+	printf("Interburst gap: %u\n", tx_pkt_times_inter);
+	printf("Intraburst gap: %u\n", tx_pkt_times_intra);
+}
+
+void
+set_tx_pkt_times(unsigned int *tx_times)
+{
+	uint16_t port_id;
+	int offload_found = 0;
+	int offset;
+	int flag;
+
+	static const struct rte_mbuf_dynfield desc_offs = {
+		.name = RTE_MBUF_DYNFIELD_TIMESTAMP_NAME,
+		.size = sizeof(uint64_t),
+		.align = __alignof__(uint64_t),
+	};
+	static const struct rte_mbuf_dynflag desc_flag = {
+		.name = RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME,
+	};
+
+	RTE_ETH_FOREACH_DEV(port_id) {
+		struct rte_eth_dev_info dev_info = { 0 };
+		int ret;
+
+		ret = rte_eth_dev_info_get(port_id, &dev_info);
+		if (ret == 0 && dev_info.tx_offload_capa &
+				DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP) {
+			offload_found = 1;
+			break;
+		}
+	}
+	if (!offload_found) {
+		printf("No device supporting Tx timestamp scheduling found, "
+		       "dynamic flag and field not registered\n");
+		return;
+	}
+	offset = rte_mbuf_dynfield_register(&desc_offs);
+	if (offset < 0 && rte_errno != EEXIST)
+		printf("Dynamic timestamp field registration error: %d",
+		       rte_errno);
+	flag = rte_mbuf_dynflag_register(&desc_flag);
+	if (flag < 0 && rte_errno != EEXIST)
+		printf("Dynamic timestamp flag registration error: %d",
+		       rte_errno);
+	tx_pkt_times_inter = tx_times[0];
+	tx_pkt_times_intra = tx_times[1];
+}
+
+void
 setup_gro(const char *onoff, portid_t port_id)
 {
 	if (!rte_eth_dev_is_valid_port(port_id)) {
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index f5feb62..d1216e0 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -223,6 +223,12 @@  struct fwd_engine * fwd_engines[] = {
 uint8_t txonly_multi_flow;
 /**< Whether multiple flows are generated in TXONLY mode. */
 
+uint32_t tx_pkt_times_inter;
+/**< Timings for send scheduling in TXONLY mode, time between bursts. */
+
+uint32_t tx_pkt_times_intra;
+/**< Timings for send scheduling in TXONLY mode, time between packets. */
+
 uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */
 uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */
 
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index a803750..9825649 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -442,6 +442,8 @@  struct queue_stats_mappings {
 extern uint16_t tx_pkt_length; /**< Length of TXONLY packet */
 extern uint16_t tx_pkt_seg_lengths[RTE_MAX_SEGS_PER_PKT]; /**< Seg. lengths */
 extern uint8_t  tx_pkt_nb_segs; /**< Number of segments in TX packets */
+extern uint32_t tx_pkt_times_intra;
+extern uint32_t tx_pkt_times_inter;
 
 enum tx_pkt_split {
 	TX_PKT_SPLIT_OFF,
@@ -794,6 +796,8 @@  void vlan_tpid_set(portid_t port_id, enum rte_vlan_type vlan_type,
 void set_verbose_level(uint16_t vb_level);
 void set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs);
 void show_tx_pkt_segments(void);
+void set_tx_pkt_times(unsigned int *tx_times);
+void show_tx_pkt_times(void);
 void set_tx_pkt_split(const char *name);
 void set_nb_pkt_per_burst(uint16_t pkt_burst);
 char *list_pkt_forwarding_modes(void);
diff --git a/app/test-pmd/txonly.c b/app/test-pmd/txonly.c
index 076ccaf..97f4a45 100644
--- a/app/test-pmd/txonly.c
+++ b/app/test-pmd/txonly.c
@@ -53,6 +53,12 @@ 
 static struct rte_ipv4_hdr pkt_ip_hdr; /**< IP header of transmitted packets. */
 RTE_DEFINE_PER_LCORE(uint8_t, _ip_var); /**< IP address variation */
 static struct rte_udp_hdr pkt_udp_hdr; /**< UDP header of tx packets. */
+RTE_DEFINE_PER_LCORE(uint64_t, timestamp_qskew);
+					/**< Timestamp offset per queue */
+static uint64_t timestamp_mask; /**< Timestamp dynamic flag mask */
+static int32_t timestamp_off; /**< Timestamp dynamic field offset */
+static bool timestamp_enable; /**< Timestamp enable */
+static uint64_t timestamp_initial[RTE_MAX_ETHPORTS];
 
 static void
 copy_buf_to_pkt_segs(void* buf, unsigned len, struct rte_mbuf *pkt,
@@ -150,7 +156,8 @@ 
 static inline bool
 pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool *mbp,
 		struct rte_ether_hdr *eth_hdr, const uint16_t vlan_tci,
-		const uint16_t vlan_tci_outer, const uint64_t ol_flags)
+		const uint16_t vlan_tci_outer, const uint64_t ol_flags,
+		const uint16_t idx, const struct fwd_stream *fs)
 {
 	struct rte_mbuf *pkt_segs[RTE_MAX_SEGS_PER_PKT];
 	struct rte_mbuf *pkt_seg;
@@ -213,6 +220,53 @@ 
 	copy_buf_to_pkt(&pkt_udp_hdr, sizeof(pkt_udp_hdr), pkt,
 			sizeof(struct rte_ether_hdr) +
 			sizeof(struct rte_ipv4_hdr));
+	if (unlikely(timestamp_enable)) {
+		uint64_t skew = RTE_PER_LCORE(timestamp_qskew);
+		struct {
+			rte_be32_t signature;
+			rte_be16_t pkt_idx;
+			rte_be16_t queue_idx;
+			rte_be64_t ts;
+		} timestamp_mark;
+
+		if (unlikely(!skew)) {
+			struct rte_eth_dev *dev = &rte_eth_devices[fs->tx_port];
+			unsigned int txqs_n = dev->data->nb_tx_queues;
+			uint64_t phase = tx_pkt_times_inter * fs->tx_queue /
+					 (txqs_n ? txqs_n : 1);
+			/*
+			 * Initialize the scheduling time phase shift
+			 * depending on queue index.
+			 */
+			skew = timestamp_initial[fs->tx_port] +
+			       tx_pkt_times_inter + phase;
+			RTE_PER_LCORE(timestamp_qskew) = skew;
+		}
+		timestamp_mark.pkt_idx = rte_cpu_to_be_16(idx);
+		timestamp_mark.queue_idx = rte_cpu_to_be_16(fs->tx_queue);
+		timestamp_mark.signature = rte_cpu_to_be_32(0xBEEFC0DE);
+		if (unlikely(!idx)) {
+			skew +=	tx_pkt_times_inter;
+			pkt->ol_flags |= timestamp_mask;
+			*RTE_MBUF_DYNFIELD
+				(pkt, timestamp_off, uint64_t *) = skew;
+			RTE_PER_LCORE(timestamp_qskew) = skew;
+			timestamp_mark.ts = rte_cpu_to_be_64(skew);
+		} else if (tx_pkt_times_intra) {
+			skew +=	tx_pkt_times_intra;
+			pkt->ol_flags |= timestamp_mask;
+			*RTE_MBUF_DYNFIELD
+				(pkt, timestamp_off, uint64_t *) = skew;
+			RTE_PER_LCORE(timestamp_qskew) = skew;
+			timestamp_mark.ts = rte_cpu_to_be_64(skew);
+		} else {
+			timestamp_mark.ts = RTE_BE64(0);
+		}
+		copy_buf_to_pkt(&timestamp_mark, sizeof(timestamp_mark), pkt,
+			sizeof(struct rte_ether_hdr) +
+			sizeof(struct rte_ipv4_hdr) +
+			sizeof(pkt_udp_hdr));
+	}
 	/*
 	 * Complete first mbuf of packet and append it to the
 	 * burst of packets to be transmitted.
@@ -275,7 +329,8 @@ 
 			if (unlikely(!pkt_burst_prepare(pkts_burst[nb_pkt], mbp,
 							&eth_hdr, vlan_tci,
 							vlan_tci_outer,
-							ol_flags))) {
+							ol_flags,
+							nb_pkt, fs))) {
 				rte_mempool_put_bulk(mbp,
 						(void **)&pkts_burst[nb_pkt],
 						nb_pkt_per_burst - nb_pkt);
@@ -290,7 +345,8 @@ 
 			if (unlikely(!pkt_burst_prepare(pkt, mbp, &eth_hdr,
 							vlan_tci,
 							vlan_tci_outer,
-							ol_flags))) {
+							ol_flags,
+							nb_pkt, fs))) {
 				rte_pktmbuf_free(pkt);
 				break;
 			}
@@ -302,6 +358,7 @@ 
 		return;
 
 	nb_tx = rte_eth_tx_burst(fs->tx_port, fs->tx_queue, pkts_burst, nb_pkt);
+
 	/*
 	 * Retry if necessary
 	 */
@@ -342,15 +399,33 @@ 
 }
 
 static void
-tx_only_begin(__rte_unused portid_t pi)
+tx_only_begin(portid_t pi)
 {
 	uint16_t pkt_data_len;
+	int dynf;
 
 	pkt_data_len = (uint16_t) (tx_pkt_length - (
 					sizeof(struct rte_ether_hdr) +
 					sizeof(struct rte_ipv4_hdr) +
 					sizeof(struct rte_udp_hdr)));
 	setup_pkt_udp_ip_headers(&pkt_ip_hdr, &pkt_udp_hdr, pkt_data_len);
+
+	timestamp_enable = false;
+	timestamp_mask = 0;
+	timestamp_off = -1;
+	RTE_PER_LCORE(timestamp_qskew) = 0;
+	dynf = rte_mbuf_dynflag_lookup
+				(RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME, NULL);
+	if (dynf >= 0)
+		timestamp_mask = 1ULL << dynf;
+	dynf = rte_mbuf_dynfield_lookup
+				(RTE_MBUF_DYNFIELD_TIMESTAMP_NAME, NULL);
+	if (dynf >= 0)
+		timestamp_off = dynf;
+	timestamp_enable = tx_pkt_times_inter &&
+			   timestamp_mask &&
+			   timestamp_off >= 0 &&
+			   !rte_eth_read_clock(pi, &timestamp_initial[pi]);
 }
 
 struct fwd_engine tx_only_engine = {
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index a808b6a..3f54787 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -266,7 +266,7 @@  show config
 Displays the configuration of the application.
 The configuration comes from the command-line, the runtime or the application defaults::
 
-   testpmd> show config (rxtx|cores|fwd|txpkts)
+   testpmd> show config (rxtx|cores|fwd|txpkts|txtimes)
 
 The available information categories are:
 
@@ -278,6 +278,8 @@  The available information categories are:
 
 * ``txpkts``: Packets to TX configuration.
 
+* ``txtimes``: Burst time pattern for Tx only mode.
+
 For example:
 
 .. code-block:: console
@@ -725,6 +727,40 @@  Set the length of each segment of the TX-ONLY packets or length of packet for FL
 
 Where x[,y]* represents a CSV list of values, without white space.
 
+set txtimes
+~~~~~~~~~~~
+
+Configure the timing burst pattern for Tx only mode. This command enables
+the packet send scheduling on dynamic timestamp mbuf field and configures
+timing pattern in Tx only mode. In this mode, if scheduling is enabled
+application provides timestamps in the packets being sent. It is possible
+to configure delay (in unspecified device clock units) between bursts
+and between the packets within the burst::
+
+   testpmd> set txtimes (inter),(intra)
+
+where:
+
+* ``inter``  is the delay between the bursts in the device clock units.
+  If ``intra`` is zero, this is the time between the beginnings of the
+  first packets in the neighbour bursts, if ``intra`` is not zero,
+  ``inter`` specifies the time between the beginning of the first packet
+  of the current burst and the beginning of the last packet of the
+  previous burst. If ``inter`` parameter is zero the send scheduling
+  on timestamps is disabled (default).
+
+* ``intra`` is the delay between the packets within the burst specified
+  in the device clock units. The number of packets in the burst is defined
+  by regular burst setting. If ``intra`` parameter is zero no timestamps
+  provided in the packets excepting  the first one in the burst.
+
+As the result the bursts of packet will be transmitted with specific
+delays between the packets within the burst and specific delay between
+the bursts. The rte_eth_read_clock() must be supported by the device(s)
+and is supposed to be engaged to get the current device clock value
+and provide the reference for the timestamps. If there is no supported
+rte_eth_read_clock() there will be no send scheduling provided on the port.
+
 set txsplit
 ~~~~~~~~~~~