[v7,4/4] examples/ipsec-secgw: add offload fallback tests
Checks
Commit Message
Add tests for offload fallback feature; add inbound config modificator
SGW_CFG_XPRM_IN (offload fallback setting can be set only for inbound
SAs). Tests are using cryptodev for outbound SA.
To test fragmentation with QAT set:
MULTI_SEG_TEST="--reassemble=4096 --cryptodev_mask=0x5555"
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
---
doc/guides/sample_app_ug/ipsec_secgw.rst | 5 +++++
examples/ipsec-secgw/test/trs_aesgcm_common_defs.sh | 4 ++--
.../test/trs_aesgcm_inline_crypto_fallback_defs.sh | 5 +++++
examples/ipsec-secgw/test/tun_aesgcm_common_defs.sh | 6 ++++--
.../test/tun_aesgcm_inline_crypto_fallback_defs.sh | 5 +++++
5 files changed, 21 insertions(+), 4 deletions(-)
create mode 100644 examples/ipsec-secgw/test/trs_aesgcm_inline_crypto_fallback_defs.sh
create mode 100644 examples/ipsec-secgw/test/tun_aesgcm_inline_crypto_fallback_defs.sh
@@ -753,6 +753,11 @@ Also the user can optionally setup:
* ``CRYPTO_DEV``: crypto device to be used ('-w <pci-id>'). If none specified
appropriate vdevs will be created by the script
+* ``MULTI_SEG_TEST``: ipsec-secgw option to enable reassembly support and
+ specify size of reassembly table (e.g.
+ ``MULTI_SEG_TEST='--reassemble 128'``). This option must be set for
+ fallback session tests.
+
Note that most of the tests require the appropriate crypto PMD/device to be
available.
@@ -29,11 +29,11 @@ sp ipv6 out esp bypass pri 1 sport 0:65535 dport 0:65535
#SA in rules
sa in 7 aead_algo aes-128-gcm \
aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport ${SGW_CFG_XPRM}
+mode transport ${SGW_CFG_XPRM} ${SGW_CFG_XPRM_IN}
sa in 9 aead_algo aes-128-gcm \
aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport ${SGW_CFG_XPRM}
+mode transport ${SGW_CFG_XPRM} ${SGW_CFG_XPRM_IN}
#SA out rules
sa out 7 aead_algo aes-128-gcm \
new file mode 100644
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/trs_aesgcm_defs.sh
+
+SGW_CFG_XPRM_IN='port_id 0 type inline-crypto-offload fallback lookaside-none'
@@ -29,11 +29,13 @@ sp ipv6 out esp bypass pri 1 sport 0:65535 dport 0:65535
#SA in rules
sa in 7 aead_algo aes-128-gcm \
aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4} ${SGW_CFG_XPRM}
+mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4} ${SGW_CFG_XPRM} \
+${SGW_CFG_XPRM_IN}
sa in 9 aead_algo aes-128-gcm \
aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6} ${SGW_CFG_XPRM}
+mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6} ${SGW_CFG_XPRM} \
+${SGW_CFG_XPRM_IN}
#SA out rules
sa out 7 aead_algo aes-128-gcm \
new file mode 100644
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+. ${DIR}/tun_aesgcm_defs.sh
+
+SGW_CFG_XPRM_IN='port_id 0 type inline-crypto-offload fallback lookaside-none'