ethdev: add HIGIG2 key field to flow API
diff mbox series

Message ID 20191014042956.18616-1-kirankumark@marvell.com
State Superseded, archived
Delegated to: Ferruh Yigit
Headers show
Series
  • ethdev: add HIGIG2 key field to flow API
Related show

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/iol-compilation success Compile Testing PASS
ci/iol-intel-Performance success Performance Testing PASS
ci/Intel-compilation fail Compilation issues
ci/iol-mellanox-Performance success Performance Testing PASS

Commit Message

Kiran Kumar Kokkilagadda Oct. 14, 2019, 4:29 a.m. UTC
From: Kiran Kumar K <kirankumark@marvell.com>

Add new rte_flow_item_higig2_hdr in order to match higig2 header.
It is a layer 2.5 protocol and used in broadcom switches.
Header format is based on the following document.
http://read.pudn.com/downloads558/doc/comm/2301468/HiGig_protocol.pdf

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
---
 doc/guides/prog_guide/rte_flow.rst |  8 ++++
 lib/librte_ethdev/rte_flow.c       |  1 +
 lib/librte_ethdev/rte_flow.h       | 77 ++++++++++++++++++++++++++++++
 3 files changed, 86 insertions(+)

Comments

Andrew Rybchenko Oct. 14, 2019, 7:08 a.m. UTC | #1
On 10/14/19 7:29 AM, kirankumark@marvell.com wrote:
> From: Kiran Kumar K <kirankumark@marvell.com>
>
> Add new rte_flow_item_higig2_hdr in order to match higig2 header.
> It is a layer 2.5 protocol and used in broadcom switches.
> Header format is based on the following document.
> http://read.pudn.com/downloads558/doc/comm/2301468/HiGig_protocol.pdf
>
> Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
> ---
>   doc/guides/prog_guide/rte_flow.rst |  8 ++++
>   lib/librte_ethdev/rte_flow.c       |  1 +
>   lib/librte_ethdev/rte_flow.h       | 77 ++++++++++++++++++++++++++++++

As far as I remember support in testpmd is a must requirement
to add new RTE flow API feature.

>   3 files changed, 86 insertions(+)
>
> diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
> index 1c837ff13..71365b159 100644
> --- a/doc/guides/prog_guide/rte_flow.rst
> +++ b/doc/guides/prog_guide/rte_flow.rst
> @@ -1290,6 +1290,14 @@ Matches a IP Authentication Header (RFC 4302).
>   - Default ``mask`` matches spi.
>   
>   
> +Item: ``HIGIG2``
> +^^^^^^^^^^^^^^^^^
> +
> +Matches a HIGIG2 header field. It is layer 2.5 protocol and used in
> +broadcom switches.
> +
> +- Default ``mask`` matches classification and vlan.
> +


Right now there is one empty line between items and two between
the last item and actions. It should be preserved.

>   Actions
>   ~~~~~~~
>   
> diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
> index 81a85b995..ca0f68016 100644
> --- a/lib/librte_ethdev/rte_flow.c
> +++ b/lib/librte_ethdev/rte_flow.c
> @@ -83,6 +83,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
>   	MK_FLOW_ITEM(NSH, sizeof(struct rte_flow_item_nsh)),
>   	MK_FLOW_ITEM(IGMP, sizeof(struct rte_flow_item_igmp)),
>   	MK_FLOW_ITEM(AH, sizeof(struct rte_flow_item_ah)),
> +	MK_FLOW_ITEM(HIGIG2, sizeof(struct rte_flow_item_higig2_hdr)),
>   };
>   
>   /** Generate flow_action[] entry. */
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index bcfc06cdc..59e37f714 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -491,6 +491,12 @@ enum rte_flow_item_type {
>   	 *
>   	 */
>   	RTE_FLOW_ITEM_TYPE_AH,
> +
> +	/**
> +	 * Matches a HIGIG header.
> +	 * see struct rte_flow_item_higig2_hdr.
> +	 */
> +	RTE_FLOW_ITEM_TYPE_HIGIG2,
>   };
>   
>   /**
> @@ -515,6 +521,77 @@ static const struct rte_flow_item_any rte_flow_item_any_mask = {
>   };
>   #endif
>   
> +/**
> + * RTE_FLOW_ITEM_TYPE_HIGIG2
> + * Matches higig2 header.
> + */
> +struct rte_higig2_frc {
> +	uint32_t ksop:8;
> +	uint32_t resv:3;
> +	uint32_t mcst:1;
> +	uint32_t tc:4;
> +	uint32_t dst_modid:8;
> +	uint32_t dst_pid:8;
> +	uint32_t src_modid:8;
> +	uint32_t src_pid:8;
> +	uint32_t lbid:8;
> +	uint32_t dp:2;
> +	uint32_t resv1:3;
> +	uint32_t ppd_type:3;
> +} __attribute__((packed));
> +
> +struct rte_higig2_ppt_type0 {
> +	uint32_t dst_t:1;
> +	uint32_t dst_tgid:3;
> +	uint32_t ingress_tagged:1;
> +	uint32_t mirror_only:1;
> +	uint32_t mirror_done:1;
> +	uint32_t mirror:1;
> +	uint32_t res:2;
> +	uint32_t l3:1;
> +	uint32_t label_present:1;
> +	uint32_t vc_label2:4;
> +	uint32_t vc_label1:8;
> +	uint32_t vc_label0:8;
> +	uint32_t vid_high:8;
> +	uint32_t vid_low:8;
> +	uint32_t pfm:2;
> +	uint32_t src_t:1;
> +	uint32_t res1:2;
> +	uint32_t opcode:3;
> +	uint32_t hdr_ext_len:3;
> +	uint32_t res2:5;
> +} __attribute__((packed));
> +
> +struct rte_higig2_ppt_type1 {
> +	uint32_t classification:16;
> +	uint32_t resv:16;
> +	uint32_t vid:16;
> +	uint32_t pfm:2;
> +	uint32_t src_t:1;
> +	uint32_t resv1:2;
> +	uint32_t opcode:3;
> +	uint32_t hdr_ext_len:3;
> +	uint32_t resv2:5;
> +} __attribute__((packed));
> +

Usage of bit fields in network headers require
big/little endian handling. See lib/librte_net/rte_gre.h
Also other network protocol headers are defined in
lib/librte_net.

> +RTE_STD_C11
> +struct rte_flow_item_higig2_hdr {
> +	struct rte_higig2_frc fcr;
> +	union {
> +		struct rte_higig2_ppt_type0 ppt0;
> +		struct rte_higig2_ppt_type1 ppt1;
> +	};
> +} __attribute__((packed));
> +
> +/** Default mask for RTE_FLOW_ITEM_TYPE_HIGIG2. */
> +#ifndef __cplusplus
> +static const struct rte_flow_item_higig2_hdr rte_flow_item_higig2_hdr_mask = {
> +	.ppt1.classification = 0xffff,
> +	.ppt1.vid = 0xfff,
> +};

It would be useful to see default mask choice motivation.

> +#endif
> +
>   /**
>    * RTE_FLOW_ITEM_TYPE_VF
>    *
Kiran Kumar Kokkilagadda Oct. 15, 2019, 4:23 a.m. UTC | #2
-----Original Message-----
From: Andrew Rybchenko <arybchenko@solarflare.com> 
Sent: Monday, October 14, 2019 12:38 PM
To: Kiran Kumar Kokkilagadda <kirankumark@marvell.com>; Adrien Mazarguil <adrien.mazarguil@6wind.com>; John McNamara <john.mcnamara@intel.com>; Marko Kovacevic <marko.kovacevic@intel.com>; Thomas Monjalon <thomas@monjalon.net>; Ferruh Yigit <ferruh.yigit@intel.com>
Cc: dev@dpdk.org; ajit.khaparde@broadcom.com
Subject: [EXT] Re: [dpdk-dev] [PATCH] ethdev: add HIGIG2 key field to flow API

External Email

----------------------------------------------------------------------
On 10/14/19 7:29 AM, kirankumark@marvell.com wrote:

> From: Kiran Kumar K <kirankumark@marvell.com>

>

> Add new rte_flow_item_higig2_hdr in order to match higig2 header.

> It is a layer 2.5 protocol and used in broadcom switches.

> Header format is based on the following document.

> https://urldefense.proofpoint.com/v2/url?u=http-3A__read.pudn.com_downloads558_doc_comm_2301468_HiGig-5Fprotocol.pdf&d=DwICaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=owEKckYY4FTmil1Z6oBURwkTThyuRbLAY9LdfiaT6HA&m=E--ycNQdWbQ_5bNBEDLQHwLS3axpOnsTIAtUe290BPU&s=IDtfzPnjppslgp0Wrkv_TGxl1wIqDspU6jNzC3LKciM&e= 

>

> Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>

> ---

>   doc/guides/prog_guide/rte_flow.rst |  8 ++++

>   lib/librte_ethdev/rte_flow.c       |  1 +

>   lib/librte_ethdev/rte_flow.h       | 77 ++++++++++++++++++++++++++++++



As far as I remember support in testpmd is a must requirement

to add new RTE flow API feature.

>> Will add support to parse this item in testpmd, Will be adding basic fields/ non bitmap fields to parse, like classification and vid. 

>   3 files changed, 86 insertions(+)

>

> diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst

> index 1c837ff13..71365b159 100644

> --- a/doc/guides/prog_guide/rte_flow.rst

> +++ b/doc/guides/prog_guide/rte_flow.rst

> @@ -1290,6 +1290,14 @@ Matches a IP Authentication Header (RFC 4302).

>   - Default ``mask`` matches spi.

>   

>   

> +Item: ``HIGIG2``

> +^^^^^^^^^^^^^^^^^

> +

> +Matches a HIGIG2 header field. It is layer 2.5 protocol and used in

> +broadcom switches.

> +

> +- Default ``mask`` matches classification and vlan.

> +





Right now there is one empty line between items and two between

the last item and actions. It should be preserved.

>> Ack, Will add this change.


>   Actions

>   ~~~~~~~

>   

> diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c

> index 81a85b995..ca0f68016 100644

> --- a/lib/librte_ethdev/rte_flow.c

> +++ b/lib/librte_ethdev/rte_flow.c

> @@ -83,6 +83,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {

>   	MK_FLOW_ITEM(NSH, sizeof(struct rte_flow_item_nsh)),

>   	MK_FLOW_ITEM(IGMP, sizeof(struct rte_flow_item_igmp)),

>   	MK_FLOW_ITEM(AH, sizeof(struct rte_flow_item_ah)),

> +	MK_FLOW_ITEM(HIGIG2, sizeof(struct rte_flow_item_higig2_hdr)),

>   };

>   

>   /** Generate flow_action[] entry. */

> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h

> index bcfc06cdc..59e37f714 100644

> --- a/lib/librte_ethdev/rte_flow.h

> +++ b/lib/librte_ethdev/rte_flow.h

> @@ -491,6 +491,12 @@ enum rte_flow_item_type {

>   	 *

>   	 */

>   	RTE_FLOW_ITEM_TYPE_AH,

> +

> +	/**

> +	 * Matches a HIGIG header.

> +	 * see struct rte_flow_item_higig2_hdr.

> +	 */

> +	RTE_FLOW_ITEM_TYPE_HIGIG2,

>   };

>   

>   /**

> @@ -515,6 +521,77 @@ static const struct rte_flow_item_any rte_flow_item_any_mask = {

>   };

>   #endif

>   

> +/**

> + * RTE_FLOW_ITEM_TYPE_HIGIG2

> + * Matches higig2 header.

> + */

> +struct rte_higig2_frc {

> +	uint32_t ksop:8;

> +	uint32_t resv:3;

> +	uint32_t mcst:1;

> +	uint32_t tc:4;

> +	uint32_t dst_modid:8;

> +	uint32_t dst_pid:8;

> +	uint32_t src_modid:8;

> +	uint32_t src_pid:8;

> +	uint32_t lbid:8;

> +	uint32_t dp:2;

> +	uint32_t resv1:3;

> +	uint32_t ppd_type:3;

> +} __attribute__((packed));

> +

> +struct rte_higig2_ppt_type0 {

> +	uint32_t dst_t:1;

> +	uint32_t dst_tgid:3;

> +	uint32_t ingress_tagged:1;

> +	uint32_t mirror_only:1;

> +	uint32_t mirror_done:1;

> +	uint32_t mirror:1;

> +	uint32_t res:2;

> +	uint32_t l3:1;

> +	uint32_t label_present:1;

> +	uint32_t vc_label2:4;

> +	uint32_t vc_label1:8;

> +	uint32_t vc_label0:8;

> +	uint32_t vid_high:8;

> +	uint32_t vid_low:8;

> +	uint32_t pfm:2;

> +	uint32_t src_t:1;

> +	uint32_t res1:2;

> +	uint32_t opcode:3;

> +	uint32_t hdr_ext_len:3;

> +	uint32_t res2:5;

> +} __attribute__((packed));

> +

> +struct rte_higig2_ppt_type1 {

> +	uint32_t classification:16;

> +	uint32_t resv:16;

> +	uint32_t vid:16;

> +	uint32_t pfm:2;

> +	uint32_t src_t:1;

> +	uint32_t resv1:2;

> +	uint32_t opcode:3;

> +	uint32_t hdr_ext_len:3;

> +	uint32_t resv2:5;

> +} __attribute__((packed));

> +



Usage of bit fields in network headers require

big/little endian handling. See lib/librte_net/rte_gre.h

Also other network protocol headers are defined in

lib/librte_net.

>> Will move the header to new file lib/librte_net/rte_higig.h

> +RTE_STD_C11

> +struct rte_flow_item_higig2_hdr {

> +	struct rte_higig2_frc fcr;

> +	union {

> +		struct rte_higig2_ppt_type0 ppt0;

> +		struct rte_higig2_ppt_type1 ppt1;

> +	};

> +} __attribute__((packed));

> +

> +/** Default mask for RTE_FLOW_ITEM_TYPE_HIGIG2. */

> +#ifndef __cplusplus

> +static const struct rte_flow_item_higig2_hdr rte_flow_item_higig2_hdr_mask = {

> +	.ppt1.classification = 0xffff,

> +	.ppt1.vid = 0xfff,

> +};



It would be useful to see default mask choice motivation.

>> Most of the use case scenarios we have, the traffic will be scattered based on classification and vid fields, so added these 2 fields as default mask.


> +#endif

> +

>   /**

>    * RTE_FLOW_ITEM_TYPE_VF

>    *
Stephen Hemminger Oct. 15, 2019, 4:47 p.m. UTC | #3
On Mon, 14 Oct 2019 09:59:56 +0530
<kirankumark@marvell.com> wrote:

> +/**
> + * RTE_FLOW_ITEM_TYPE_HIGIG2
> + * Matches higig2 header.
> + */
> +struct rte_higig2_frc {
> +	uint32_t ksop:8;
> +	uint32_t resv:3;
> +	uint32_t mcst:1;
> +	uint32_t tc:4;
> +	uint32_t dst_modid:8;
> +	uint32_t dst_pid:8;
> +	uint32_t src_modid:8;
> +	uint32_t src_pid:8;
> +	uint32_t lbid:8;
> +	uint32_t dp:2;
> +	uint32_t resv1:3;
> +	uint32_t ppd_type:3;
> +} __attribute__((packed));
> +
> +struct rte_higig2_ppt_type0 {
> +	uint32_t dst_t:1;
> +	uint32_t dst_tgid:3;
> +	uint32_t ingress_tagged:1;
> +	uint32_t mirror_only:1;
> +	uint32_t mirror_done:1;
> +	uint32_t mirror:1;
> +	uint32_t res:2;
> +	uint32_t l3:1;
> +	uint32_t label_present:1;
> +	uint32_t vc_label2:4;
> +	uint32_t vc_label1:8;
> +	uint32_t vc_label0:8;
> +	uint32_t vid_high:8;
> +	uint32_t vid_low:8;
> +	uint32_t pfm:2;
> +	uint32_t src_t:1;
> +	uint32_t res1:2;
> +	uint32_t opcode:3;
> +	uint32_t hdr_ext_len:3;
> +	uint32_t res2:5;
> +} __attribute__((packed));
> +
> +struct rte_higig2_ppt_type1 {
> +	uint32_t classification:16;
> +	uint32_t resv:16;
> +	uint32_t vid:16;
> +	uint32_t pfm:2;
> +	uint32_t src_t:1;
> +	uint32_t resv1:2;
> +	uint32_t opcode:3;
> +	uint32_t hdr_ext_len:3;
> +	uint32_t resv2:5;
> +} __attribute__((packed));
> +
> +RTE_STD_C11
> +struct rte_flow_item_higig2_hdr {
> +	struct rte_higig2_frc fcr;
> +	union {
> +		struct rte_higig2_ppt_type0 ppt0;
> +		struct rte_higig2_ppt_type1 ppt1;
> +	};
> +} __attribute__((packed));
> +
> +/** Default mask for RTE_FLOW_ITEM_TYPE_HIGIG2. */
> +#ifndef __cplusplus
> +static const struct rte_flow_item_higig2_hdr rte_flow_item_higig2_hdr_mask = {
> +	.ppt1.classification = 0xffff,
> +	.ppt1.vid = 0xfff,
> +};
> +#endif
> +

Why do all these structures have to be packed. They are all uint32.
Kiran Kumar Kokkilagadda Oct. 16, 2019, 3:14 a.m. UTC | #4
> -----Original Message-----
> From: Stephen Hemminger <stephen@networkplumber.org>
> Sent: Tuesday, October 15, 2019 10:17 PM
> To: Kiran Kumar Kokkilagadda <kirankumark@marvell.com>
> Cc: Adrien Mazarguil <adrien.mazarguil@6wind.com>; John McNamara
> <john.mcnamara@intel.com>; Marko Kovacevic <marko.kovacevic@intel.com>;
> Thomas Monjalon <thomas@monjalon.net>; Ferruh Yigit
> <ferruh.yigit@intel.com>; Andrew Rybchenko <arybchenko@solarflare.com>;
> dev@dpdk.org; ajit.khaparde@broadcom.com
> Subject: [EXT] Re: [dpdk-dev] [PATCH] ethdev: add HIGIG2 key field to flow API
> 
> External Email
> 
> ----------------------------------------------------------------------
> On Mon, 14 Oct 2019 09:59:56 +0530
> <kirankumark@marvell.com> wrote:
> 
> > +/**
> > + * RTE_FLOW_ITEM_TYPE_HIGIG2
> > + * Matches higig2 header.
> > + */
> > +struct rte_higig2_frc {
> > +	uint32_t ksop:8;
> > +	uint32_t resv:3;
> > +	uint32_t mcst:1;
> > +	uint32_t tc:4;
> > +	uint32_t dst_modid:8;
> > +	uint32_t dst_pid:8;
> > +	uint32_t src_modid:8;
> > +	uint32_t src_pid:8;
> > +	uint32_t lbid:8;
> > +	uint32_t dp:2;
> > +	uint32_t resv1:3;
> > +	uint32_t ppd_type:3;
> > +} __attribute__((packed));
> > +
> > +struct rte_higig2_ppt_type0 {
> > +	uint32_t dst_t:1;
> > +	uint32_t dst_tgid:3;
> > +	uint32_t ingress_tagged:1;
> > +	uint32_t mirror_only:1;
> > +	uint32_t mirror_done:1;
> > +	uint32_t mirror:1;
> > +	uint32_t res:2;
> > +	uint32_t l3:1;
> > +	uint32_t label_present:1;
> > +	uint32_t vc_label2:4;
> > +	uint32_t vc_label1:8;
> > +	uint32_t vc_label0:8;
> > +	uint32_t vid_high:8;
> > +	uint32_t vid_low:8;
> > +	uint32_t pfm:2;
> > +	uint32_t src_t:1;
> > +	uint32_t res1:2;
> > +	uint32_t opcode:3;
> > +	uint32_t hdr_ext_len:3;
> > +	uint32_t res2:5;
> > +} __attribute__((packed));
> > +
> > +struct rte_higig2_ppt_type1 {
> > +	uint32_t classification:16;
> > +	uint32_t resv:16;
> > +	uint32_t vid:16;
> > +	uint32_t pfm:2;
> > +	uint32_t src_t:1;
> > +	uint32_t resv1:2;
> > +	uint32_t opcode:3;
> > +	uint32_t hdr_ext_len:3;
> > +	uint32_t resv2:5;
> > +} __attribute__((packed));
> > +
> > +RTE_STD_C11
> > +struct rte_flow_item_higig2_hdr {
> > +	struct rte_higig2_frc fcr;
> > +	union {
> > +		struct rte_higig2_ppt_type0 ppt0;
> > +		struct rte_higig2_ppt_type1 ppt1;
> > +	};
> > +} __attribute__((packed));
> > +
> > +/** Default mask for RTE_FLOW_ITEM_TYPE_HIGIG2. */ #ifndef
> > +__cplusplus static const struct rte_flow_item_higig2_hdr
> > +rte_flow_item_higig2_hdr_mask = {
> > +	.ppt1.classification = 0xffff,
> > +	.ppt1.vid = 0xfff,
> > +};
> > +#endif
> > +
> 
> Why do all these structures have to be packed. They are all uint32.
Will fix in V4.

Patch
diff mbox series

diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index 1c837ff13..71365b159 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1290,6 +1290,14 @@  Matches a IP Authentication Header (RFC 4302).
 - Default ``mask`` matches spi.
 
 
+Item: ``HIGIG2``
+^^^^^^^^^^^^^^^^^
+
+Matches a HIGIG2 header field. It is layer 2.5 protocol and used in
+broadcom switches.
+
+- Default ``mask`` matches classification and vlan.
+
 Actions
 ~~~~~~~
 
diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
index 81a85b995..ca0f68016 100644
--- a/lib/librte_ethdev/rte_flow.c
+++ b/lib/librte_ethdev/rte_flow.c
@@ -83,6 +83,7 @@  static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(NSH, sizeof(struct rte_flow_item_nsh)),
 	MK_FLOW_ITEM(IGMP, sizeof(struct rte_flow_item_igmp)),
 	MK_FLOW_ITEM(AH, sizeof(struct rte_flow_item_ah)),
+	MK_FLOW_ITEM(HIGIG2, sizeof(struct rte_flow_item_higig2_hdr)),
 };
 
 /** Generate flow_action[] entry. */
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index bcfc06cdc..59e37f714 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -491,6 +491,12 @@  enum rte_flow_item_type {
 	 *
 	 */
 	RTE_FLOW_ITEM_TYPE_AH,
+
+	/**
+	 * Matches a HIGIG header.
+	 * see struct rte_flow_item_higig2_hdr.
+	 */
+	RTE_FLOW_ITEM_TYPE_HIGIG2,
 };
 
 /**
@@ -515,6 +521,77 @@  static const struct rte_flow_item_any rte_flow_item_any_mask = {
 };
 #endif
 
+/**
+ * RTE_FLOW_ITEM_TYPE_HIGIG2
+ * Matches higig2 header.
+ */
+struct rte_higig2_frc {
+	uint32_t ksop:8;
+	uint32_t resv:3;
+	uint32_t mcst:1;
+	uint32_t tc:4;
+	uint32_t dst_modid:8;
+	uint32_t dst_pid:8;
+	uint32_t src_modid:8;
+	uint32_t src_pid:8;
+	uint32_t lbid:8;
+	uint32_t dp:2;
+	uint32_t resv1:3;
+	uint32_t ppd_type:3;
+} __attribute__((packed));
+
+struct rte_higig2_ppt_type0 {
+	uint32_t dst_t:1;
+	uint32_t dst_tgid:3;
+	uint32_t ingress_tagged:1;
+	uint32_t mirror_only:1;
+	uint32_t mirror_done:1;
+	uint32_t mirror:1;
+	uint32_t res:2;
+	uint32_t l3:1;
+	uint32_t label_present:1;
+	uint32_t vc_label2:4;
+	uint32_t vc_label1:8;
+	uint32_t vc_label0:8;
+	uint32_t vid_high:8;
+	uint32_t vid_low:8;
+	uint32_t pfm:2;
+	uint32_t src_t:1;
+	uint32_t res1:2;
+	uint32_t opcode:3;
+	uint32_t hdr_ext_len:3;
+	uint32_t res2:5;
+} __attribute__((packed));
+
+struct rte_higig2_ppt_type1 {
+	uint32_t classification:16;
+	uint32_t resv:16;
+	uint32_t vid:16;
+	uint32_t pfm:2;
+	uint32_t src_t:1;
+	uint32_t resv1:2;
+	uint32_t opcode:3;
+	uint32_t hdr_ext_len:3;
+	uint32_t resv2:5;
+} __attribute__((packed));
+
+RTE_STD_C11
+struct rte_flow_item_higig2_hdr {
+	struct rte_higig2_frc fcr;
+	union {
+		struct rte_higig2_ppt_type0 ppt0;
+		struct rte_higig2_ppt_type1 ppt1;
+	};
+} __attribute__((packed));
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_HIGIG2. */
+#ifndef __cplusplus
+static const struct rte_flow_item_higig2_hdr rte_flow_item_higig2_hdr_mask = {
+	.ppt1.classification = 0xffff,
+	.ppt1.vid = 0xfff,
+};
+#endif
+
 /**
  * RTE_FLOW_ITEM_TYPE_VF
  *