@@ -171,7 +171,8 @@
MLX5_FLOW_ACTION_INC_TCP_SEQ | \
MLX5_FLOW_ACTION_DEC_TCP_SEQ | \
MLX5_FLOW_ACTION_INC_TCP_ACK | \
- MLX5_FLOW_ACTION_DEC_TCP_ACK)
+ MLX5_FLOW_ACTION_DEC_TCP_ACK | \
+ MLX5_FLOW_ACTION_OF_SET_VLAN_VID)
#define MLX5_FLOW_VLAN_ACTIONS (MLX5_FLOW_ACTION_OF_POP_VLAN | \
MLX5_FLOW_ACTION_OF_PUSH_VLAN)
@@ -123,6 +123,12 @@ struct field_modify_info modify_eth[] = {
{0, 0, 0},
};
+struct field_modify_info modify_vlan_out_first_vid[] = {
+ /* Size in bits !!! */
+ {12, 0, MLX5_MODI_OUT_FIRST_VID},
+ {0, 0, 0},
+};
+
struct field_modify_info modify_ipv4[] = {
{1, 8, MLX5_MODI_OUT_IPV4_TTL},
{4, 12, MLX5_MODI_OUT_SIPV4},
@@ -421,6 +427,46 @@ struct field_modify_info modify_tcp[] = {
}
/**
+ * Convert modify-header set VLAN VID action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_vlan_vid
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_of_set_vlan_vid *conf =
+ (const struct rte_flow_action_of_set_vlan_vid *)(action->conf);
+ int i = resource->actions_num;
+ struct mlx5_modification_cmd *actions = &resource->actions[i];
+ struct field_modify_info *field = modify_vlan_out_first_vid;
+
+ if (i >= MLX5_MODIFY_NUM)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "too many items to modify");
+ actions[i].action_type = MLX5_MODIFICATION_TYPE_SET;
+ actions[i].field = field->id;
+ actions[i].length = field->size;
+ actions[i].offset = field->offset;
+ actions[i].data0 = rte_cpu_to_be_32(actions[i].data0);
+ actions[i].data1 = conf->vlan_vid;
+ actions[i].data1 = actions[i].data1 << 16;
+ resource->actions_num = ++i;
+ return 0;
+}
+
+/**
* Convert modify-header set TP action to DV specification.
*
* @param[in,out] resource
@@ -1026,8 +1072,8 @@ struct field_modify_info modify_tcp[] = {
/**
* Validate the set VLAN VID.
*
- * @param[in] action_flags
- * Holds the actions detected until now.
+ * @param[in] item_flags
+ * Holds the items detected in this rule.
* @param[in] actions
* Pointer to the list of actions remaining in the flow rule.
* @param[in] attr
@@ -1039,7 +1085,7 @@ struct field_modify_info modify_tcp[] = {
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-flow_dv_validate_action_set_vlan_vid(uint64_t action_flags,
+flow_dv_validate_action_set_vlan_vid(uint64_t item_flags,
const struct rte_flow_action actions[],
struct rte_flow_error *error)
{
@@ -1050,17 +1096,27 @@ struct field_modify_info modify_tcp[] = {
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"VLAN VID value to too big");
+ /* If a push VLAN action follows then it will handle this action */
if (mlx5_flow_find_action(actions,
- RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN) == NULL)
+ RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN))
+ return 0;
+
+ /*
+ * Action is on an existing VLAN header:
+ * Need to verify this is a single modify CID action.
+ * Rule mast include a match on outer VLAN.
+ */
+ if (mlx5_flow_find_action(++action,
+ RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
- "set VLAN VID can only be used "
- "with push VLAN action");
- if (action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN)
- return rte_flow_error_set(error, ENOTSUP,
+ "Multiple VLAN VID modifications are "
+ "not supported");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_VLAN))
+ return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
- "set VLAN VID action must precede "
- "the push VLAN action");
+ "match on VLAN is required in order "
+ "to set VLAN VID");
return 0;
}
@@ -3482,7 +3538,7 @@ struct field_modify_info modify_tcp[] = {
break;
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
ret = flow_dv_validate_action_set_vlan_vid
- (action_flags, actions, error);
+ (item_flags, actions, error);
if (ret < 0)
return ret;
/* Count VID with push_vlan command. */
@@ -5203,6 +5259,8 @@ struct field_modify_info modify_tcp[] = {
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.push_vlan_res->action;
action_flags |= MLX5_FLOW_ACTION_OF_PUSH_VLAN;
+ /* Push VLAN command is also handling this VLAN_VID */
+ action_flags &= ~MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
break;
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
vlan_tci =
@@ -5218,7 +5276,15 @@ struct field_modify_info modify_tcp[] = {
vlan.tci |=
((const struct rte_flow_action_of_set_vlan_vid *)
actions->conf)->vlan_vid;
- /* Push VLAN command will use this value */
+ if (mlx5_flow_find_action
+ (actions,
+ RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN))
+ break;
+ /* If no VLAN push - this is a modify header action */
+ if (flow_dv_convert_action_modify_vlan_vid
+ (&res, actions, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
@@ -413,6 +413,7 @@ enum mlx5_modification_field {
MLX5_MODI_OUT_DIPV6_31_0,
MLX5_MODI_OUT_SIPV4,
MLX5_MODI_OUT_DIPV4,
+ MLX5_MODI_OUT_FIRST_VID,
MLX5_MODI_IN_SMAC_47_16 = 0x31,
MLX5_MODI_IN_SMAC_15_0,
MLX5_MODI_IN_ETHERTYPE,