From patchwork Thu Jul 18 03:36:16 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ajit Khaparde X-Patchwork-Id: 56690 X-Patchwork-Delegate: ferruh.yigit@amd.com Return-Path: X-Original-To: patchwork@dpdk.org Delivered-To: patchwork@dpdk.org Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id BF1211BE18; Thu, 18 Jul 2019 05:37:45 +0200 (CEST) Received: from rnd-relay.smtp.broadcom.com (rnd-relay.smtp.broadcom.com [192.19.229.170]) by dpdk.org (Postfix) with ESMTP id 9E8671B959 for ; Thu, 18 Jul 2019 05:37:12 +0200 (CEST) Received: from nis-sj1-27.broadcom.com (nis-sj1-27.lvn.broadcom.net [10.75.144.136]) by rnd-relay.smtp.broadcom.com (Postfix) with ESMTP id 1B93C30C39F; Wed, 17 Jul 2019 20:37:10 -0700 (PDT) DKIM-Filter: OpenDKIM Filter v2.10.3 rnd-relay.smtp.broadcom.com 1B93C30C39F DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=broadcom.com; s=dkimrelay; t=1563421030; bh=fMGoFD0CTWArMNBeXjpd3g6d78pf7P64g/vmuSIFVts=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=dy3OkPon6WXYH+DAN5EDmhQTsyrfqJ434cjH7Gkgyuo8bASyP6BLabo0ZlaO4s9C3 94GTEqQT/lBfvxeZKaDX+7lEHZjCfXZj+GjRN3O6oK2vbf3fjzNtozpJE6iqSjE74N snJY0NHYUelKcA16/SDhPuFKf8lk/FALEb1swp7w= Received: from C02VPB22HTD6.wifi.broadcom.net (c02vpb22htd6.wifi.broadcom.net [10.122.43.105]) by nis-sj1-27.broadcom.com (Postfix) with ESMTP id 0BBFDAC0761; Wed, 17 Jul 2019 20:37:09 -0700 (PDT) From: Ajit Khaparde To: dev@dpdk.org Cc: ferruh.yigit@intel.com Date: Thu, 18 Jul 2019 09:06:16 +0530 Message-Id: <20190718033616.37605-23-ajit.khaparde@broadcom.com> X-Mailer: git-send-email 2.20.1 (Apple Git-117) In-Reply-To: <20190718033616.37605-1-ajit.khaparde@broadcom.com> References: <20190718033616.37605-1-ajit.khaparde@broadcom.com> MIME-Version: 1.0 Subject: [dpdk-dev] [PATCH 22/22] net/bnxt: update HWRM API to version 1.10.0.91 X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Update HWRM API to version 1.10.0.91 Signed-off-by: Ajit Khaparde --- drivers/net/bnxt/hsi_struct_def_dpdk.h | 1283 ++++++++++++++++++++---- 1 file changed, 1100 insertions(+), 183 deletions(-) diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h index c64cd8609..79c1f3d7c 100644 --- a/drivers/net/bnxt/hsi_struct_def_dpdk.h +++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h @@ -72,10 +72,8 @@ struct hwrm_resp_hdr { #define TLV_TYPE_QUERY_ROCE_CC_GEN1 UINT32_C(0x4) /* RoCE slow path command to modify CC Gen1 support. */ #define TLV_TYPE_MODIFY_ROCE_CC_GEN1 UINT32_C(0x5) -/* Engine CKV - The device's serial number. */ -#define TLV_TYPE_ENGINE_CKV_DEVICE_SERIAL_NUMBER UINT32_C(0x8001) -/* Engine CKV - Per-function random nonce data. */ -#define TLV_TYPE_ENGINE_CKV_NONCE UINT32_C(0x8002) +/* Engine CKV - The Alias key EC curve and ECC public key information. */ +#define TLV_TYPE_ENGINE_CKV_ALIAS_ECC_PUBLIC_KEY UINT32_C(0x8001) /* Engine CKV - Initialization vector. */ #define TLV_TYPE_ENGINE_CKV_IV UINT32_C(0x8003) /* Engine CKV - Authentication tag. */ @@ -84,12 +82,14 @@ struct hwrm_resp_hdr { #define TLV_TYPE_ENGINE_CKV_CIPHERTEXT UINT32_C(0x8005) /* Engine CKV - Supported algorithms. */ #define TLV_TYPE_ENGINE_CKV_ALGORITHMS UINT32_C(0x8006) -/* Engine CKV - The EC curve name and ECC public key information. */ -#define TLV_TYPE_ENGINE_CKV_ECC_PUBLIC_KEY UINT32_C(0x8007) +/* Engine CKV - The Host EC curve name and ECC public key information. */ +#define TLV_TYPE_ENGINE_CKV_HOST_ECC_PUBLIC_KEY UINT32_C(0x8007) /* Engine CKV - The ECDSA signature. */ #define TLV_TYPE_ENGINE_CKV_ECDSA_SIGNATURE UINT32_C(0x8008) +/* Engine CKV - The SRT EC curve name and ECC public key information. */ +#define TLV_TYPE_ENGINE_CKV_SRT_ECC_PUBLIC_KEY UINT32_C(0x8009) #define TLV_TYPE_LAST \ - TLV_TYPE_ENGINE_CKV_ECDSA_SIGNATURE + TLV_TYPE_ENGINE_CKV_SRT_ECC_PUBLIC_KEY /* tlv (size:64b/8B) */ @@ -386,6 +386,10 @@ struct cmd_nums { #define HWRM_FW_QSTATUS UINT32_C(0xc1) #define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2) #define HWRM_FW_SYNC UINT32_C(0xc3) + #define HWRM_FW_STATE_BUFFER_QCAPS UINT32_C(0xc4) + #define HWRM_FW_STATE_QUIESCE UINT32_C(0xc5) + #define HWRM_FW_STATE_BACKUP UINT32_C(0xc6) + #define HWRM_FW_STATE_RESTORE UINT32_C(0xc7) /* Experimental */ #define HWRM_FW_SET_TIME UINT32_C(0xc8) /* Experimental */ @@ -497,8 +501,6 @@ struct cmd_nums { #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS UINT32_C(0x124) /* Experimental */ #define HWRM_CFA_TFLIB UINT32_C(0x125) - /* Engine CKV - Ping the device and SRT firmware to get the public key. */ - #define HWRM_ENGINE_CKV_HELLO UINT32_C(0x12d) /* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */ #define HWRM_ENGINE_CKV_STATUS UINT32_C(0x12e) /* Engine CKV - Add a new CKEK used to encrypt keys. */ @@ -589,6 +591,8 @@ struct cmd_nums { #define HWRM_FUNC_VF_BW_CFG UINT32_C(0x195) /* Queries the BW of any VF */ #define HWRM_FUNC_VF_BW_QCFG UINT32_C(0x196) + /* Queries pf ids belong to specified host(s) */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY UINT32_C(0x197) /* Experimental */ #define HWRM_SELFTEST_QLIST UINT32_C(0x200) /* Experimental */ @@ -835,8 +839,8 @@ struct hwrm_err_output { #define HWRM_VERSION_MINOR 10 #define HWRM_VERSION_UPDATE 0 /* non-zero means beta version */ -#define HWRM_VERSION_RSVD 74 -#define HWRM_VERSION_STR "1.10.0.74" +#define HWRM_VERSION_RSVD 91 +#define HWRM_VERSION_STR "1.10.0.91" /**************** * hwrm_ver_get * @@ -1211,7 +1215,13 @@ struct hwrm_ver_get_output { */ uint8_t flags; /* - * If set to 1, device is not ready. + * If set to 1, it will indicate to host drivers that firmware is + * not ready to start full blown HWRM commands. Host drivers should + * re-try HWRM_VER_GET with some timeout period. The timeout period + * can be selected up to 5 seconds. + * For Example, PCIe hot-plug: + * Hot plug timing is system dependent. It generally takes up to + * 600 miliseconds for firmware to clear DEV_NOT_RDY flag. * If set to 0, device is ready to accept all HWRM commands. */ #define HWRM_VER_GET_OUTPUT_FLAGS_DEV_NOT_RDY UINT32_C(0x1) @@ -2909,6 +2919,10 @@ struct rx_pkt_cmpl_hi { #define RX_PKT_CMPL_REORDER_SFT 0 } __attribute__((packed)); +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + */ /* rx_tpa_start_cmpl (size:128b/16B) */ struct rx_tpa_start_cmpl { uint16_t flags_type; @@ -3070,7 +3084,12 @@ struct rx_tpa_start_cmpl { uint32_t rss_hash; } __attribute__((packed)); -/* Last 16 bytes of rx_tpq_start_cmpl. */ +/* + * Last 16 bytes of rx_tpa_start_cmpl. + * + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + */ /* rx_tpa_start_cmpl_hi (size:128b/16B) */ struct rx_tpa_start_cmpl_hi { uint32_t flags2; @@ -3079,34 +3098,29 @@ struct rx_tpa_start_cmpl_hi { * inner packet and that the sum passed for all segments * included in the aggregation. */ - #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC \ - UINT32_C(0x1) + #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1) /* * This indicates that the TCP, UDP or ICMP checksum was * calculated for the inner packet and that the sum passed * for all segments included in the aggregation. */ - #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC \ - UINT32_C(0x2) + #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2) /* * This indicates that the ip checksum was calculated for the * tunnel header and that the sum passed for all segments * included in the aggregation. */ - #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC \ - UINT32_C(0x4) + #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4) /* * This indicates that the UDP checksum was * calculated for the tunnel packet and that the sum passed for * all segments included in the aggregation. */ - #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC \ - UINT32_C(0x8) + #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8) /* This value indicates what format the metadata field is. */ - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK \ - UINT32_C(0xf0) - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4 - /* No metadata informtaion. Value is zero. */ + #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) + #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4 + /* No metadata information. Value is zero. */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE \ (UINT32_C(0x0) << 4) /* @@ -3118,71 +3132,13 @@ struct rx_tpa_start_cmpl_hi { */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN \ (UINT32_C(0x1) << 4) - /* - * If ext_meta_format is equal to 1, the metadata field - * contains the lower 16b of the tunnel ID value, justified - * to LSB - * - VXLAN = VNI[23:0] -> VXLAN Network ID - * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier. - * - NVGRE = TNI[23:0] -> Tenant Network ID - * - GRE = KEY[31:0 -> key fieled with bit mask. zero if K = 0 - * - IPV4 = 0 (not populated) - * - IPV6 = Flow Label[19:0] - * - PPPoE = sessionID[15:0] - * - MPLs = Outer label[19:0] - * - UPAR = Selected[31:0] with bit mask - */ - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \ - (UINT32_C(0x2) << 4) - /* - * if ext_meta_format is equal to 1, metadata field contains - * 16b metadata from the prepended header (chdr_data). - */ - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \ - (UINT32_C(0x3) << 4) - /* - * If ext_meta_format is equal to 1, the metadata field contains - * the outer_l3_offset, inner_l2_offset, inner_l3_offset and - * inner_l4_size. - * - metadata[8:0] contains the outer_l3_offset. - * - metadata[17:9] contains the inner_l2_offset. - * - metadata[26:18] contains the inner_l3_offset. - * - metadata[31:27] contains the inner_l4_size. - */ - #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \ - (UINT32_C(0x4) << 4) #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \ - RX_TPA_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET + RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN /* * This field indicates the IP type for the inner-most IP header. * A value of '0' indicates IPv4. A value of '1' indicates IPv6. */ - #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE \ - UINT32_C(0x100) - /* - * This indicates that the complete 1's complement checksum was - * calculated for the packet. - */ - #define RX_TPA_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC \ - UINT32_C(0x200) - /* - * The combination of this value and meta_format indicated what - * format the metadata field is. - */ - #define RX_TPA_START_CMPL_FLAGS2_EXT_META_FORMAT_MASK \ - UINT32_C(0xc00) - #define RX_TPA_START_CMPL_FLAGS2_EXT_META_FORMAT_SFT 10 - /* - * This value is the complete 1's complement checksum calculated from - * the start of the outer L3 header to the end of the packet (not - * including the ethernet crc). It is valid when the - * 'complete_checksum_calc' flag is set. For TPA Start completions, - * the complete checksum is calculated for the first packet in the - * aggregation only. - */ - #define RX_TPA_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \ - UINT32_C(0xffff0000) - #define RX_TPA_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16 + #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) /* * This is data from the CFA block as indicated by the meta_format * field. @@ -3199,41 +3155,13 @@ struct rx_tpa_start_cmpl_hi { /* When meta_format=1, this value is the VLAN TPID. */ #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000) #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16 - uint16_t errors_v2; + uint16_t v2; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ - #define RX_TPA_START_CMPL_V2 UINT32_C(0x1) - #define RX_TPA_START_CMPL_ERRORS_MASK \ - UINT32_C(0xfffe) - #define RX_TPA_START_CMPL_ERRORS_SFT 1 - /* - * This error indicates that there was some sort of problem with - * the BDs for the packet that was found after part of the - * packet was already placed. The packet should be treated as - * invalid. - */ - #define RX_TPA_START_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) - #define RX_TPA_START_CMPL_ERRORS_BUFFER_ERROR_SFT 1 - /* No buffer error */ - #define RX_TPA_START_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \ - (UINT32_C(0x0) << 1) - /* - * Bad Format: - * BDs were not formatted correctly. - */ - #define RX_TPA_START_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ - (UINT32_C(0x3) << 1) - /* - * Flush: - * There was a bad_format error on the previous operation - */ - #define RX_TPA_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH \ - (UINT32_C(0x5) << 1) - #define RX_TPA_START_CMPL_ERRORS_BUFFER_ERROR_LAST \ - RX_TPA_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH + #define RX_TPA_START_CMPL_V2 UINT32_C(0x1) /* * This field identifies the CFA action rule that was used for this * packet. @@ -3273,6 +3201,10 @@ struct rx_tpa_start_cmpl_hi { #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27 } __attribute__((packed)); +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + */ /* rx_tpa_end_cmpl (size:128b/16B) */ struct rx_tpa_end_cmpl { uint16_t flags_type; @@ -3426,35 +3358,21 @@ struct rx_tpa_end_cmpl { uint32_t tsdelta; } __attribute__((packed)); -/* Last 16 bytes of rx_tpa_end_cmpl. */ +/* + * Last 16 bytes of rx_tpa_end_cmpl. + * + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is 0. + */ /* rx_tpa_end_cmpl_hi (size:128b/16B) */ struct rx_tpa_end_cmpl_hi { - /* - * This value is the number of duplicate ACKs that have been - * received as part of the TPA operation. - */ - uint16_t tpa_dup_acks; + uint32_t tpa_dup_acks; /* * This value is the number of duplicate ACKs that have been * received as part of the TPA operation. */ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf) #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0 - /* - * This value indicated the offset in bytes from the beginning of - * the packet where the inner payload starts. This value is valid - * for TCP, UDP, FCoE and RoCE packets - */ - uint8_t payload_offset; - /* - * The value is the total number of aggregation buffers that were - * used in the TPA operation. All TPA aggregation buffer completions - * precede the TPA End completion. If the value is zero, then the - * aggregation is completely contained in the buffer space provided - * in the aggregation start completion. - * Note that the field is simply provided as a cross check. - */ - uint8_t tpa_agg_bufs; /* * This value is the valid when TPA completion is active. It * indicates the length of the longest segment of the TPA operation @@ -3474,19 +3392,632 @@ struct rx_tpa_end_cmpl_hi { * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ - #define RX_TPA_END_CMPL_V2 UINT32_C(0x1) - #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe) - #define RX_TPA_END_CMPL_ERRORS_SFT 1 + #define RX_TPA_END_CMPL_V2 UINT32_C(0x1) + #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe) + #define RX_TPA_END_CMPL_ERRORS_SFT 1 + /* + * This error indicates that there was some sort of problem with + * the BDs for the packet that was found after part of the + * packet was already placed. The packet should be treated as + * invalid. + */ + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + /* + * This error occurs when there is a fatal HW problem in + * the chip only. It indicates that there were not + * BDs on chip but that there was adequate reservation. + * provided by the TPA block. + */ + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ + (UINT32_C(0x2) << 1) + /* + * This error occurs when TPA block was not configured to + * reserve adequate BDs for TPA operations on this RX + * ring. All data for the TPA operation was not placed. + * + * This error can also be generated when the number of + * segments is not programmed correctly in TPA and the + * 33 total aggregation buffers allowed for the TPA + * operation has been exceeded. + */ + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \ + (UINT32_C(0x4) << 1) + #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \ + RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR + /* unused5 is 16 b */ + uint16_t unused_4; + /* + * This is the opaque value that was completed for the TPA start + * completion that corresponds to this TPA end completion. + */ + uint32_t start_opaque; +} __attribute__((packed)); + +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_start_cmpl (size:128b/16B) */ +struct rx_tpa_v2_start_cmpl { + uint16_t flags_type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define RX_TPA_V2_START_CMPL_TYPE_MASK \ + UINT32_C(0x3f) + #define RX_TPA_V2_START_CMPL_TYPE_SFT 0 + /* + * RX L2 TPA Start Completion: + * Completion at the beginning of a TPA operation. + * Length = 32B + */ + #define RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START \ + UINT32_C(0x13) + #define RX_TPA_V2_START_CMPL_TYPE_LAST \ + RX_TPA_V2_START_CMPL_TYPE_RX_TPA_START + #define RX_TPA_V2_START_CMPL_FLAGS_MASK \ + UINT32_C(0xffc0) + #define RX_TPA_V2_START_CMPL_FLAGS_SFT 6 + /* This bit will always be '0' for TPA start completions. */ + #define RX_TPA_V2_START_CMPL_FLAGS_ERROR \ + UINT32_C(0x40) + /* This field indicates how the packet was placed in the buffer. */ + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_MASK \ + UINT32_C(0x380) + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_SFT 7 + /* + * Jumbo: + * TPA Packet was placed using jumbo algorithm. This means + * that the first buffer will be filled with data before + * moving to aggregation buffers. Each aggregation buffer + * will be filled before moving to the next aggregation + * buffer. + */ + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_JUMBO \ + (UINT32_C(0x1) << 7) + /* + * Header/Data Separation: + * Packet was placed using Header/Data separation algorithm. + * The separation location is indicated by the itype field. + */ + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_HDS \ + (UINT32_C(0x2) << 7) + /* + * GRO/Jumbo: + * Packet will be placed using GRO/Jumbo where the first + * packet is filled with data. Subsequent packets will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. + */ + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ + (UINT32_C(0x5) << 7) + /* + * GRO/Header-Data Separation: + * Packet will be placed using GRO/HDS where the header + * is in the first packet. + * Payload of each packet will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. + */ + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \ + (UINT32_C(0x6) << 7) + #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_LAST \ + RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_GRO_HDS + /* This bit is '1' if the RSS field in this completion is valid. */ + #define RX_TPA_V2_START_CMPL_FLAGS_RSS_VALID \ + UINT32_C(0x400) + /* + * For devices that support timestamps, when this bit is cleared the + * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset` + * field contains the 32b timestamp for + * the packet from the MAC. When this bit is set, the + * `inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset` + * field contains the outer_l3_offset, inner_l2_offset, + * inner_l3_offset, and inner_l4_size. + */ + #define RX_TPA_V2_START_CMPL_FLAGS_TIMESTAMP_FLD_FORMAT \ + UINT32_C(0x800) + /* + * This value indicates what the inner packet determined for the + * packet was. + */ + #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_MASK \ + UINT32_C(0xf000) + #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_SFT 12 + /* + * TCP Packet: + * Indicates that the packet was IP and TCP. + */ + #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP \ + (UINT32_C(0x2) << 12) + #define RX_TPA_V2_START_CMPL_FLAGS_ITYPE_LAST \ + RX_TPA_V2_START_CMPL_FLAGS_ITYPE_TCP + /* + * This value indicates the amount of packet data written to the + * buffer the opaque field in this completion corresponds to. + */ + uint16_t len; + /* + * This is a copy of the opaque field from the RX BD this completion + * corresponds to. + */ + uint32_t opaque; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + uint8_t v1; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define RX_TPA_V2_START_CMPL_V1 UINT32_C(0x1) + #define RX_TPA_V2_START_CMPL_LAST RX_TPA_V2_START_CMPL_V1 + /* + * This is the RSS hash type for the packet. The value is packed + * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. + * + * The value of tuple_extrac_op provides the information about + * what fields the hash was computed on. + * * 0: The RSS hash was computed over source IP address, + * destination IP address, source port, and destination port of inner + * IP and TCP or UDP headers. Note: For non-tunneled packets, + * the packet headers are considered inner packet headers for the RSS + * hash computation purpose. + * * 1: The RSS hash was computed over source IP address and destination + * IP address of inner IP header. Note: For non-tunneled packets, + * the packet headers are considered inner packet headers for the RSS + * hash computation purpose. + * * 2: The RSS hash was computed over source IP address, + * destination IP address, source port, and destination port of + * IP and TCP or UDP headers of outer tunnel headers. + * Note: For non-tunneled packets, this value is not applicable. + * * 3: The RSS hash was computed over source IP address and + * destination IP address of IP header of outer tunnel headers. + * Note: For non-tunneled packets, this value is not applicable. + * + * Note that 4-tuples values listed above are applicable + * for layer 4 protocols supported and enabled for RSS in the hardware, + * HWRM firmware, and drivers. For example, if RSS hash is supported and + * enabled for TCP traffic only, then the values of tuple_extract_op + * corresponding to 4-tuples are only valid for TCP traffic. + */ + uint8_t rss_hash_type; + /* + * This is the aggregation ID that the completion is associated + * with. Use this number to correlate the TPA start completion + * with the TPA end completion. + */ + uint16_t agg_id; + /* + * This value is the RSS hash value calculated for the packet + * based on the mode bits and key value in the VNIC. + */ + uint32_t rss_hash; +} __attribute__((packed)); + +/* + * Last 16 bytes of rx_tpa_v2_start_cmpl. + * + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_start_cmpl_hi (size:128b/16B) */ +struct rx_tpa_v2_start_cmpl_hi { + uint32_t flags2; + /* + * This indicates that the ip checksum was calculated for the + * inner packet and that the sum passed for all segments + * included in the aggregation. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_IP_CS_CALC \ + UINT32_C(0x1) + /* + * This indicates that the TCP, UDP or ICMP checksum was + * calculated for the inner packet and that the sum passed + * for all segments included in the aggregation. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_L4_CS_CALC \ + UINT32_C(0x2) + /* + * This indicates that the ip checksum was calculated for the + * tunnel header and that the sum passed for all segments + * included in the aggregation. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_T_IP_CS_CALC \ + UINT32_C(0x4) + /* + * This indicates that the UDP checksum was + * calculated for the tunnel packet and that the sum passed for + * all segments included in the aggregation. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_T_L4_CS_CALC \ + UINT32_C(0x8) + /* This value indicates what format the metadata field is. */ + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_MASK \ + UINT32_C(0xf0) + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_SFT 4 + /* No metadata informtaion. Value is zero. */ + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_NONE \ + (UINT32_C(0x0) << 4) + /* + * The metadata field contains the VLAN tag and TPID value. + * - metadata[11:0] contains the vlan VID value. + * - metadata[12] contains the vlan DE value. + * - metadata[15:13] contains the vlan PRI value. + * - metadata[31:16] contains the vlan TPID value. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_VLAN \ + (UINT32_C(0x1) << 4) + /* + * If ext_meta_format is equal to 1, the metadata field + * contains the lower 16b of the tunnel ID value, justified + * to LSB + * - VXLAN = VNI[23:0] -> VXLAN Network ID + * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier. + * - NVGRE = TNI[23:0] -> Tenant Network ID + * - GRE = KEY[31:0 -> key fieled with bit mask. zero if K = 0 + * - IPV4 = 0 (not populated) + * - IPV6 = Flow Label[19:0] + * - PPPoE = sessionID[15:0] + * - MPLs = Outer label[19:0] + * - UPAR = Selected[31:0] with bit mask + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_TUNNEL_ID \ + (UINT32_C(0x2) << 4) + /* + * if ext_meta_format is equal to 1, metadata field contains + * 16b metadata from the prepended header (chdr_data). + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_CHDR_DATA \ + (UINT32_C(0x3) << 4) + /* + * If ext_meta_format is equal to 1, the metadata field contains + * the outer_l3_offset, inner_l2_offset, inner_l3_offset and + * inner_l4_size. + * - metadata[8:0] contains the outer_l3_offset. + * - metadata[17:9] contains the inner_l2_offset. + * - metadata[26:18] contains the inner_l3_offset. + * - metadata[31:27] contains the inner_l4_size. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET \ + (UINT32_C(0x4) << 4) + #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_LAST \ + RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET + /* + * This field indicates the IP type for the inner-most IP header. + * A value of '0' indicates IPv4. A value of '1' indicates IPv6. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_IP_TYPE \ + UINT32_C(0x100) + /* + * This indicates that the complete 1's complement checksum was + * calculated for the packet. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_CALC \ + UINT32_C(0x200) + /* + * The combination of this value and meta_format indicated what + * format the metadata field is. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_MASK \ + UINT32_C(0xc00) + #define RX_TPA_V2_START_CMPL_FLAGS2_EXT_META_FORMAT_SFT 10 + /* + * This value is the complete 1's complement checksum calculated from + * the start of the outer L3 header to the end of the packet (not + * including the ethernet crc). It is valid when the + * 'complete_checksum_calc' flag is set. For TPA Start completions, + * the complete checksum is calculated for the first packet in the + * aggregation only. + */ + #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_MASK \ + UINT32_C(0xffff0000) + #define RX_TPA_V2_START_CMPL_FLAGS2_COMPLETE_CHECKSUM_SFT 16 + /* + * This is data from the CFA block as indicated by the meta_format + * field. + */ + uint32_t metadata; + /* When {ext_meta_format,meta_format}=1, this value is the VLAN VID. */ + #define RX_TPA_V2_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff) + #define RX_TPA_V2_START_CMPL_METADATA_VID_SFT 0 + /* When {ext_meta_format,meta_format}=1, this value is the VLAN DE. */ + #define RX_TPA_V2_START_CMPL_METADATA_DE UINT32_C(0x1000) + /* When {ext_meta_format,meta_format}=1, this value is the VLAN PRI. */ + #define RX_TPA_V2_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000) + #define RX_TPA_V2_START_CMPL_METADATA_PRI_SFT 13 + /* When {ext_meta_format,meta_format}=1, this value is the VLAN TPID. */ + #define RX_TPA_V2_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000) + #define RX_TPA_V2_START_CMPL_METADATA_TPID_SFT 16 + uint16_t errors_v2; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define RX_TPA_V2_START_CMPL_V2 \ + UINT32_C(0x1) + #define RX_TPA_V2_START_CMPL_ERRORS_MASK \ + UINT32_C(0xfffe) + #define RX_TPA_V2_START_CMPL_ERRORS_SFT 1 + /* + * This error indicates that there was some sort of problem with + * the BDs for the packet that was found after part of the + * packet was already placed. The packet should be treated as + * invalid. + */ + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_MASK \ + UINT32_C(0xe) + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + /* No buffer error */ + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \ + (UINT32_C(0x0) << 1) + /* + * Bad Format: + * BDs were not formatted correctly. + */ + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ + (UINT32_C(0x3) << 1) + /* + * Flush: + * There was a bad_format error on the previous operation + */ + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH \ + (UINT32_C(0x5) << 1) + #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_LAST \ + RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_FLUSH + /* + * This field identifies the CFA action rule that was used for this + * packet. + */ + uint16_t cfa_code; + /* + * For devices that support timestamps this field is overridden + * with the timestamp value. When `flags.timestamp_fld_format` is + * cleared, this field contains the 32b timestamp for the packet from the + * MAC. + * + * When `flags.timestamp_fld_format` is set, this field contains the + * outer_l3_offset, inner_l2_offset, inner_l3_offset, and inner_l4_size + * as defined below. + */ + uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset; + /* + * This is the offset from the beginning of the packet in bytes for + * the outer L3 header. If there is no outer L3 header, then this + * value is zero. + */ + #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff) + #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_SFT 0 + /* + * This is the offset from the beginning of the packet in bytes for + * the inner most L2 header. + */ + #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00) + #define RX_TPA_V2_START_CMPL_INNER_L2_OFFSET_SFT 9 + /* + * This is the offset from the beginning of the packet in bytes for + * the inner most L3 header. + */ + #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000) + #define RX_TPA_V2_START_CMPL_INNER_L3_OFFSET_SFT 18 + /* + * This is the size in bytes of the inner most L4 header. + * This can be subtracted from the payload_offset to determine + * the start of the inner most L4 header. + */ + #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000) + #define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_SFT 27 +} __attribute__((packed)); + +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_end_cmpl (size:128b/16B) */ +struct rx_tpa_v2_end_cmpl { + uint16_t flags_type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f) + #define RX_TPA_V2_END_CMPL_TYPE_SFT 0 + /* + * RX L2 TPA End Completion: + * Completion at the end of a TPA operation. + * Length = 32B + */ + #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15) + #define RX_TPA_V2_END_CMPL_TYPE_LAST \ + RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END + #define RX_TPA_V2_END_CMPL_FLAGS_MASK UINT32_C(0xffc0) + #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6 + /* + * When this bit is '1', it indicates a packet that has an + * error of some type. Type of error is indicated in + * error_flags. + */ + #define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40) + /* This field indicates how the packet was placed in the buffer. */ + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7 + /* + * Jumbo: + * TPA Packet was placed using jumbo algorithm. This means + * that the first buffer will be filled with data before + * moving to aggregation buffers. Each aggregation buffer + * will be filled before moving to the next aggregation + * buffer. + */ + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_JUMBO \ + (UINT32_C(0x1) << 7) + /* + * Header/Data Separation: + * Packet was placed using Header/Data separation algorithm. + * The separation location is indicated by the itype field. + */ + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_HDS \ + (UINT32_C(0x2) << 7) + /* + * GRO/Jumbo: + * Packet will be placed using GRO/Jumbo where the first + * packet is filled with data. Subsequent packets will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. + */ + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ + (UINT32_C(0x5) << 7) + /* + * GRO/Header-Data Separation: + * Packet will be placed using GRO/HDS where the header + * is in the first packet. + * Payload of each packet will be + * placed such that any one packet does not span two + * aggregation buffers unless it starts at the beginning of + * an aggregation buffer. + */ + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \ + (UINT32_C(0x6) << 7) + #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_LAST \ + RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS + /* unused is 2 b */ + #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00) + #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_SFT 10 + /* + * This value indicates what the inner packet determined for the + * packet was. + * - 2 TCP Packet + * Indicates that the packet was IP and TCP. This indicates + * that the ip_cs field is valid and that the tcp_udp_cs + * field is valid and contains the TCP checksum. + * This also indicates that the payload_offset field is valid. + */ + #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) + #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12 + /* + * This value is zero for TPA End completions. + * There is no data in the buffer that corresponds to the opaque + * value in this completion. + */ + uint16_t len; + /* + * This is a copy of the opaque field from the RX BD this completion + * corresponds to. + */ + uint32_t opaque; + uint8_t v1; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define RX_TPA_V2_END_CMPL_V1 UINT32_C(0x1) + /* This value is the number of segments in the TPA operation. */ + uint8_t tpa_segs; + /* + * This is the aggregation ID that the completion is associated + * with. Use this number to correlate the TPA start completion + * with the TPA end completion. + */ + uint16_t agg_id; + /* + * For non-GRO packets, this value is the + * timestamp delta between earliest and latest timestamp values for + * TPA packet. If packets were not time stamped, then delta will be + * zero. + * + * For GRO packets, this field is zero except for the following + * sub-fields. + * - tsdelta[31] + * Timestamp present indication. When '0', no Timestamp + * option is in the packet. When '1', then a Timestamp + * option is present in the packet. + */ + uint32_t tsdelta; +} __attribute__((packed)); + +/* + * Last 16 bytes of rx_tpa_v2_end_cmpl. + * + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_end_cmpl_hi (size:128b/16B) */ +struct rx_tpa_v2_end_cmpl_hi { + /* + * This value is the number of duplicate ACKs that have been + * received as part of the TPA operation. + */ + uint16_t tpa_dup_acks; + /* + * This value is the number of duplicate ACKs that have been + * received as part of the TPA operation. + */ + #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf) + #define RX_TPA_V2_END_CMPL_TPA_DUP_ACKS_SFT 0 + /* + * This value indicated the offset in bytes from the beginning of + * the packet where the inner payload starts. This value is valid + * for TCP, UDP, FCoE and RoCE packets + */ + uint8_t payload_offset; + /* + * The value is the total number of aggregation buffers that were + * used in the TPA operation. All TPA aggregation buffer completions + * preceed the TPA End completion. If the value is zero, then the + * aggregation is completely contained in the buffer space provided + * in the aggregation start completion. + * Note that the field is simply provided as a cross check. + */ + uint8_t tpa_agg_bufs; + /* + * This value is the valid when TPA completion is active. It + * indicates the length of the longest segment of the TPA operation + * for LRO mode and the length of the first segment in GRO mode. + * + * This value may be used by GRO software to re-construct the original + * packet stream from the TPA packet. This is the length of all + * but the last segment for GRO. In LRO mode this value may be used + * to indicate MSS size to the stack. + */ + uint16_t tpa_seg_len; + uint16_t unused_1; + uint16_t errors_v2; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define RX_TPA_V2_END_CMPL_V2 UINT32_C(0x1) + #define RX_TPA_V2_END_CMPL_ERRORS_MASK \ + UINT32_C(0xfffe) + #define RX_TPA_V2_END_CMPL_ERRORS_SFT 1 /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the * packet was already placed. The packet should be treated as * invalid. */ - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1 + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_MASK \ + UINT32_C(0xe) + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1 /* No buffer error */ - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \ + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \ (UINT32_C(0x0) << 1) /* * This error occurs when there is a fatal HW problem in @@ -3494,13 +4025,13 @@ struct rx_tpa_end_cmpl_hi { * BDs on chip but that there was adequate reservation. * provided by the TPA block. */ - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ (UINT32_C(0x2) << 1) /* * Bad Format: * BDs were not formatted correctly. */ - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ (UINT32_C(0x3) << 1) /* * This error occurs when TPA block was not configured to @@ -3512,18 +4043,17 @@ struct rx_tpa_end_cmpl_hi { * 33 total aggregation buffers allowed for the TPA * operation has been exceeded. */ - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \ + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \ (UINT32_C(0x4) << 1) /* * Flush: * There was a bad_format error on the previous operation */ - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH \ + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH \ (UINT32_C(0x5) << 1) - #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \ - RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH - /* unused5 is 16 b */ - uint16_t unused_4; + #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_LAST \ + RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_FLUSH + uint16_t unused_2; /* * This is the opaque value that was completed for the TPA start * completion that corresponds to this TPA end completion. @@ -3531,6 +4061,60 @@ struct rx_tpa_end_cmpl_hi { uint32_t start_opaque; } __attribute__((packed)); +/* + * This TPA completion structure is used on devices where the + * `hwrm_vnic_qcaps.max_aggs_supported` value is greater than 0. + */ +/* rx_tpa_v2_abuf_cmpl (size:128b/16B) */ +struct rx_tpa_v2_abuf_cmpl { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define RX_TPA_V2_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f) + #define RX_TPA_V2_ABUF_CMPL_TYPE_SFT 0 + /* + * RX TPA Aggregation Buffer completion : + * Completion of an L2 aggregation buffer in support of + * TPA packet completion. Length = 16B + */ + #define RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG UINT32_C(0x16) + #define RX_TPA_V2_ABUF_CMPL_TYPE_LAST \ + RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG + /* + * This is the length of the data for the packet stored in this + * aggregation buffer identified by the opaque value. This does not + * include the length of any + * data placed in other aggregation BDs or in the packet or buffer + * BDs. This length does not include any space added due to + * hdr_offset register during HDS placement mode. + */ + uint16_t len; + /* + * This is a copy of the opaque field from the RX BD this aggregation + * buffer corresponds to. + */ + uint32_t opaque; + uint16_t v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define RX_TPA_V2_ABUF_CMPL_V UINT32_C(0x1) + /* + * This is the aggregation ID that the completion is associated with. Use + * this number to correlate the TPA agg completion with the TPA start + * completion and the TPA end completion. + */ + uint16_t agg_id; + uint32_t unused_1; +} __attribute__((packed)); + /* rx_abuf_cmpl (size:128b/16B) */ struct rx_abuf_cmpl { uint16_t type; @@ -3873,13 +4457,13 @@ struct hwrm_async_event_cmpl { #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEBUG_NOTIFICATION \ UINT32_C(0x37) /* - * A EEM flow cached memory flush request event being posted to the PF - * driver. + * An EEM flow cached memory flush for all flows request event being + * posted to the PF driver. */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CACHE_FLUSH_REQ \ UINT32_C(0x38) /* - * A EEM flow cache memory flush completion event being posted to the + * An EEM flow cache memory flush completion event being posted to the * firmware by the PF driver. This is indication that host EEM flush * has completed by the PF. */ @@ -3894,7 +4478,7 @@ struct hwrm_async_event_cmpl { #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TCP_FLAG_ACTION_CHANGE \ UINT32_C(0x3a) /* - * A eem flow active event being posted to the PF or trusted VF driver + * An EEM flow active event being posted to the PF or trusted VF driver * by the firmware. The PF or trusted VF driver should update the * flow's aging timer after receiving this async event. */ @@ -4016,7 +4600,7 @@ struct hwrm_async_event_cmpl_link_status_change { UINT32_C(0xffff0) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_SFT \ 4 - /* Indicates the physical function this event occurred on. */ + /* Indicates the physical function this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_MASK \ UINT32_C(0xff00000) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_SFT \ @@ -4997,7 +5581,7 @@ struct hwrm_async_event_cmpl_vf_flr { #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_SFT 0 - /* Indicates the physical function this event occurred on. */ + /* Indicates the physical function this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_MASK \ UINT32_C(0xff0000) #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_SFT 16 @@ -5345,12 +5929,12 @@ struct hwrm_async_event_cmpl_default_vnic_change { UINT32_C(0x2) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_LAST \ HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE - /* Indicates the physical function this event occurred on. */ + /* Indicates the physical function this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_MASK \ UINT32_C(0x3fc) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_SFT \ 2 - /* Indicates the virtual function this event occurred on */ + /* Indicates the virtual function this event occured on */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_MASK \ UINT32_C(0x3fffc00) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_SFT \ @@ -5400,12 +5984,12 @@ struct hwrm_async_event_cmpl_hw_flow_aged { uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; - /* Indicates flow ID this event occurred on. */ + /* Indicates flow ID this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_ID_MASK \ UINT32_C(0x7fffffff) #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_ID_SFT \ 0 - /* Indicates flow direction this event occurred on. */ + /* Indicates flow direction this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION \ UINT32_C(0x80000000) /* @@ -5521,7 +6105,7 @@ struct hwrm_async_event_cmpl_eem_cache_flush_done { uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; - /* Indicates function ID that this event occurred on. */ + /* Indicates function ID that this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_SFT \ @@ -5603,7 +6187,7 @@ struct hwrm_async_event_cmpl_eem_flow_active { HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_EEM_FLOW_ACTIVE /* Event specific data */ uint32_t event_data2; - /* Indicates the 2nd global id this event occurred on. */ + /* Indicates the 2nd global id this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_MASK \ UINT32_C(0x3fffffff) #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_SFT \ @@ -5639,7 +6223,7 @@ struct hwrm_async_event_cmpl_eem_flow_active { uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; - /* Indicates the 1st global id this event occurred on. */ + /* Indicates the 1st global id this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_MASK \ UINT32_C(0x3fffffff) #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_SFT \ @@ -5659,7 +6243,7 @@ struct hwrm_async_event_cmpl_eem_flow_active { #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_LAST \ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_TX /* - * Indicates EEM flow aging mode this event occurred on. If + * Indicates EEM flow aging mode this event occured on. If * this bit is set to 0, the event_data1 is the EEM global * ID. If this bit is set to 1, the event_data1 is the number * of global ID in the context memory. @@ -7002,6 +7586,16 @@ struct hwrm_func_qcfg_output { */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_SECURE_MODE_ENABLED \ UINT32_C(0x80) + /* + * If set to 1, then this PF is enabled with a preboot driver that + * requires access to the legacy L2 ring model and legacy 32b + * doorbells. If set to 0, then this PF is not allowed to use + * the legacy L2 rings. This feature is not allowed on VFs and + * is only relevant for devices that require a context backing + * store. + */ + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PREBOOT_LEGACY_L2_RINGS \ + UINT32_C(0x100) /* * This value is current MAC address configured for this * function. A value of 00-00-00-00-00-00 indicates no @@ -7281,7 +7875,16 @@ struct hwrm_func_qcfg_output { * the unregister request on PF in the HOT Reset Process. */ uint16_t registered_vfs; - uint8_t unused_1[3]; + /* + * The size of the doorbell BAR in KBytes reserved for L2 including + * any area that is shared between L2 and RoCE. The L2 driver + * should only map the L2 portion of the doorbell BAR. Any rounding + * of the BAR size to the native CPU page size should be performed + * by the driver. If the value is zero, no special partitioning + * of the doorbell BAR between L2 and RoCE is required. + */ + uint16_t l2_doorbell_bar_size_kb; + uint8_t unused_1; /* * For backward compatibility this field must be set to 1. * Older drivers might look for this field to be 1 before @@ -7522,6 +8125,14 @@ struct hwrm_func_cfg_input { */ #define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_DISABLE \ UINT32_C(0x1000000) + /* + * This bit is used by preboot drivers on a PF that require access + * to the legacy L2 ring model and legacy 32b doorbells. This + * feature is not allowed on VFs and is only relevant for devices + * that require a context backing store. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_PREBOOT_LEGACY_L2_RINGS \ + UINT32_C(0x2000000) uint32_t enables; /* * This bit must be '1' for the mtu field to be @@ -12063,6 +12674,212 @@ struct hwrm_func_drv_if_change_output { uint8_t valid; } __attribute__((packed)); +/******************************* + * hwrm_func_host_pf_ids_query * + *******************************/ + + +/* hwrm_func_host_pf_ids_query_input (size:192b/24B) */ +struct hwrm_func_host_pf_ids_query_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint8_t host; + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to SOC host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_SOC UINT32_C(0x1) + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to EP0 host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_0 UINT32_C(0x2) + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to EP1 host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_1 UINT32_C(0x4) + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to EP2 host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_2 UINT32_C(0x8) + /* + * # If this bit is set to '1', the query will contain PF(s) + * belongs to EP3 host. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_HOST_EP_3 UINT32_C(0x10) + /* + * This provides a filter of what PF(s) will be returned in the + * query.. + */ + uint8_t filter; + /* + * all available PF(s) belong to the host(s) (defined in the + * host field). This includes the hidden PFs. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ALL UINT32_C(0x0) + /* + * all available PF(s) belong to the host(s) (defined in the + * host field) that is available for L2 traffic. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_L2 UINT32_C(0x1) + /* + * all available PF(s) belong to the host(s) (defined in the + * host field) that is available for ROCE traffic. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ROCE UINT32_C(0x2) + #define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_LAST \ + HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ROCE + uint8_t unused_1[6]; +} __attribute__((packed)); + +/* hwrm_func_host_pf_ids_query_output (size:128b/16B) */ +struct hwrm_func_host_pf_ids_query_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* This provides the first PF ID of the device. */ + uint16_t first_pf_id; + uint16_t pf_ordinal_mask; + /* + * When this bit is '1', it indicates first PF belongs to one of + * the hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_0 \ + UINT32_C(0x1) + /* + * When this bit is '1', it indicates 2nd PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_1 \ + UINT32_C(0x2) + /* + * When this bit is '1', it indicates 3rd PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_2 \ + UINT32_C(0x4) + /* + * When this bit is '1', it indicates 4th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_3 \ + UINT32_C(0x8) + /* + * When this bit is '1', it indicates 5th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_4 \ + UINT32_C(0x10) + /* + * When this bit is '1', it indicates 6th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_5 \ + UINT32_C(0x20) + /* + * When this bit is '1', it indicates 7th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_6 \ + UINT32_C(0x40) + /* + * When this bit is '1', it indicates 8th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_7 \ + UINT32_C(0x80) + /* + * When this bit is '1', it indicates 9th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_8 \ + UINT32_C(0x100) + /* + * When this bit is '1', it indicates 10th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_9 \ + UINT32_C(0x200) + /* + * When this bit is '1', it indicates 11th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_10 \ + UINT32_C(0x400) + /* + * When this bit is '1', it indicates 12th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_11 \ + UINT32_C(0x800) + /* + * When this bit is '1', it indicates 13th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_12 \ + UINT32_C(0x1000) + /* + * When this bit is '1', it indicates 14th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_13 \ + UINT32_C(0x2000) + /* + * When this bit is '1', it indicates 15th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_14 \ + UINT32_C(0x4000) + /* + * When this bit is '1', it indicates 16th PF belongs to one of the + * hosts defined in the input request. + */ + #define HWRM_FUNC_HOST_PF_IDS_QUERY_OUTPUT_PF_ORDINAL_MASK_FUNC_15 \ + UINT32_C(0x8000) + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + /********************* * hwrm_port_phy_cfg * *********************/ @@ -28144,6 +28961,12 @@ struct hwrm_cfa_flow_flush_input { */ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \ UINT32_C(0x2) + /* + * Set to 1 to indicate flow flush operation to cleanup all the flows by the caller. + * This flag is set to 0 by older driver. For older firmware, setting this flag has no effect. + */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_PORT \ + UINT32_C(0x4) /* Set to 1 to indicate the flow counter IDs are included in the flow table. */ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_INCL_FC \ UINT32_C(0x8000000) @@ -29316,7 +30139,15 @@ struct hwrm_cfa_ctx_mem_qcaps_output { uint16_t resp_len; /* Indicates the maximum number of context memory which can be registered. */ uint16_t max_entries; - uint8_t unused_0[6]; + uint8_t unused_0[5]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; } __attribute__((packed)); /********************** @@ -29375,7 +30206,7 @@ struct hwrm_cfa_eem_qcaps_input { uint32_t unused_0; } __attribute__((packed)); -/* hwrm_cfa_eem_qcaps_output (size:256b/32B) */ +/* hwrm_cfa_eem_qcaps_output (size:320b/40B) */ struct hwrm_cfa_eem_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; @@ -29420,29 +30251,35 @@ struct hwrm_cfa_eem_qcaps_output { uint32_t supported; /* * If set to 1, then EEM KEY0 table is supported using crc32 hash. - * If set to 0 EEM KEY0 table is not supported. + * If set to 0, EEM KEY0 table is not supported. */ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \ UINT32_C(0x1) /* * If set to 1, then EEM KEY1 table is supported using lookup3 hash. - * If set to 0 EEM KEY1 table is not supported. + * If set to 0, EEM KEY1 table is not supported. */ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \ UINT32_C(0x2) /* * If set to 1, then EEM External Record table is supported. - * If set to 0 EEM External Record table is not supported. + * If set to 0, EEM External Record table is not supported. * (This table includes action record, EFC pointers, encap pointers) */ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \ UINT32_C(0x4) /* * If set to 1, then EEM External Flow Counters table is supported. - * If set to 0 EEM External Flow Counters table is not supported. + * If set to 0, EEM External Flow Counters table is not supported. */ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \ UINT32_C(0x8) + /* + * If set to 1, then FID table used for implicit flow flush is supported. + * If set to 0, then FID table used for implicit flow flush is not supported. + */ + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \ + UINT32_C(0x10) /* * The maximum number of entries supported by EEM. When configuring the host memory * the number of numbers of entries that can supported are - @@ -29451,13 +30288,15 @@ struct hwrm_cfa_eem_qcaps_output { * number of entries. */ uint32_t max_entries_supported; - /* The entry size in bytes of each entry in the KEY0/KEY1 EEM tables. */ + /* The entry size in bytes of each entry in the EEM KEY0/KEY1 tables. */ uint16_t key_entry_size; - /* The entry size in bytes of each entry in the RECORD EEM tables. */ + /* The entry size in bytes of each entry in the EEM RECORD tables. */ uint16_t record_entry_size; - /* The entry size in bytes of each entry in the EFC EEM tables. */ + /* The entry size in bytes of each entry in the EEM EFC tables. */ uint16_t efc_entry_size; - uint8_t unused_1; + /* The FID size in bytes of each entry in the EEM FID tables. */ + uint16_t fid_entry_size; + uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -29473,7 +30312,7 @@ struct hwrm_cfa_eem_qcaps_output { ********************/ -/* hwrm_cfa_eem_cfg_input (size:320b/40B) */ +/* hwrm_cfa_eem_cfg_input (size:384b/48B) */ struct hwrm_cfa_eem_cfg_input { /* The HWRM command request type. */ uint16_t req_type; @@ -29545,6 +30384,10 @@ struct hwrm_cfa_eem_cfg_input { uint16_t record_ctx_id; /* Configured EEM with the given context if for EFC table. */ uint16_t efc_ctx_id; + /* Configured EEM with the given context if for EFC table. */ + uint16_t fid_ctx_id; + uint16_t unused_2; + uint32_t unused_3; } __attribute__((packed)); /* hwrm_cfa_eem_cfg_output (size:128b/16B) */ @@ -29611,7 +30454,7 @@ struct hwrm_cfa_eem_qcfg_input { uint32_t unused_0; } __attribute__((packed)); -/* hwrm_cfa_eem_qcfg_output (size:192b/24B) */ +/* hwrm_cfa_eem_qcfg_output (size:256b/32B) */ struct hwrm_cfa_eem_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; @@ -29633,7 +30476,17 @@ struct hwrm_cfa_eem_qcfg_output { UINT32_C(0x4) /* The number of entries the FW has configured for EEM. */ uint32_t num_entries; - uint8_t unused_0[7]; + /* Configured EEM with the given context if for KEY0 table. */ + uint16_t key0_ctx_id; + /* Configured EEM with the given context if for KEY1 table. */ + uint16_t key1_ctx_id; + /* Configured EEM with the given context if for RECORD table. */ + uint16_t record_ctx_id; + /* Configured EEM with the given context if for EFC table. */ + uint16_t efc_ctx_id; + /* Configured EEM with the given context if for EFC table. */ + uint16_t fid_ctx_id; + uint8_t unused_2[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -30287,6 +31140,53 @@ struct ctx_hw_stats { uint64_t tpa_aborts; } __attribute__((packed)); +/* Periodic statistics context DMA to host. */ +/* ctx_hw_stats_ext (size:1344b/168B) */ +struct ctx_hw_stats_ext { + /* Number of received unicast packets */ + uint64_t rx_ucast_pkts; + /* Number of received multicast packets */ + uint64_t rx_mcast_pkts; + /* Number of received broadcast packets */ + uint64_t rx_bcast_pkts; + /* Number of discarded packets on received path */ + uint64_t rx_discard_pkts; + /* Number of dropped packets on received path */ + uint64_t rx_drop_pkts; + /* Number of received bytes for unicast traffic */ + uint64_t rx_ucast_bytes; + /* Number of received bytes for multicast traffic */ + uint64_t rx_mcast_bytes; + /* Number of received bytes for broadcast traffic */ + uint64_t rx_bcast_bytes; + /* Number of transmitted unicast packets */ + uint64_t tx_ucast_pkts; + /* Number of transmitted multicast packets */ + uint64_t tx_mcast_pkts; + /* Number of transmitted broadcast packets */ + uint64_t tx_bcast_pkts; + /* Number of discarded packets on transmit path */ + uint64_t tx_discard_pkts; + /* Number of dropped packets on transmit path */ + uint64_t tx_drop_pkts; + /* Number of transmitted bytes for unicast traffic */ + uint64_t tx_ucast_bytes; + /* Number of transmitted bytes for multicast traffic */ + uint64_t tx_mcast_bytes; + /* Number of transmitted bytes for broadcast traffic */ + uint64_t tx_bcast_bytes; + /* Number of TPA eligible packets */ + uint64_t rx_tpa_eligible_pkt; + /* Number of TPA eligible bytes */ + uint64_t rx_tpa_eligible_bytes; + /* Number of TPA packets */ + uint64_t rx_tpa_pkt; + /* Number of TPA bytes */ + uint64_t rx_tpa_bytes; + /* Number of TPA errors */ + uint64_t rx_tpa_errors; +} __attribute__((packed)); + /* Periodic Engine statistics context DMA to host. */ /* ctx_eng_stats (size:512b/64B) */ struct ctx_eng_stats { @@ -30301,13 +31201,13 @@ struct ctx_eng_stats { uint64_t eng_bytes_out; /* * Count, in 4-byte (dword) units, of bytes - * that are input as auxiliary data. + * that are input as auxillary data. * This includes the aux_cmd data. */ uint64_t aux_bytes_in; /* * Count, in 4-byte (dword) units, of bytes - * that are output as auxiliary data. + * that are output as auxillary data. * This count is the buffer space for aux_data * output provided in the RQE, not the actual * aux_data written @@ -30381,6 +31281,11 @@ struct hwrm_stat_ctx_alloc_input { * shall be never done and the DMA address shall not be used. * In this case, the stat block can only be read by * hwrm_stat_ctx_query command. + * On Ethernet/L2 based devices: + * if tpa v2 supported (hwrm_vnic_qcaps[max_aggs_supported]>0), + * ctx_hw_stats_ext is used for DMA, + * else + * ctx_hw_stats is used for DMA. */ uint32_t update_period_ms; /* @@ -30397,7 +31302,13 @@ struct hwrm_stat_ctx_alloc_input { * used for network traffic or engine traffic. */ #define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1) - uint8_t unused_0[3]; + uint8_t unused_0; + /* + * This is the size of the structure (ctx_hw_stats or + * ctx_hw_stats_ext) that the driver has allocated to be used + * for the periodic DMA updates. + */ + uint16_t stats_dma_length; } __attribute__((packed)); /* hwrm_stat_ctx_alloc_output (size:128b/16B) */ @@ -30648,13 +31559,13 @@ struct hwrm_stat_ctx_eng_query_output { uint64_t eng_bytes_out; /* * Count, in 4-byte (dword) units, of bytes - * that are input as auxiliary data. + * that are input as auxillary data. * This includes the aux_cmd data. */ uint64_t aux_bytes_in; /* * Count, in 4-byte (dword) units, of bytes - * that are output as auxiliary data. + * that are output as auxillary data. * This count is the buffer space for aux_data * output provided in the RQE, not the actual * aux_data written @@ -32549,6 +33460,12 @@ struct hwrm_nvm_set_variable_input { (UINT32_C(0x3) << 1) #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_LAST \ HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FLAGS_UNUSED_0_MASK \ + UINT32_C(0x70) + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FLAGS_UNUSED_0_SFT 4 + /* When this bit is 1, update the factory default region */ + #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FACTORY_DEFAULT \ + UINT32_C(0x80) uint8_t unused_0; } __attribute__((packed));