[v6,3/6] net/mlx5: add VXLAN decap action to Direct Verbs
Checks
Commit Message
This patch implements the VXLAN decap action in DV flow for MLX5 PMD.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
---
drivers/net/mlx5/mlx5_flow.h | 1 +
drivers/net/mlx5/mlx5_flow_dv.c | 103 ++++++++++++++++++++++++++++++++++++++--
2 files changed, 100 insertions(+), 4 deletions(-)
Comments
Thursday, October 25, 2018 11:08 PM, Dekel Peled:
> Subject: [dpdk-dev] [PATCH v6 3/6] net/mlx5: add VXLAN decap action to
> Direct Verbs
>
> This patch implements the VXLAN decap action in DV flow for MLX5 PMD.
>
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow.h | 1 +
> drivers/net/mlx5/mlx5_flow_dv.c | 103
> ++++++++++++++++++++++++++++++++++++++--
> 2 files changed, 100 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index 6e92afe..3795644 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -93,6 +93,7 @@
> #define MLX5_FLOW_ACTION_SET_MAC_SRC (1u << 20) #define
> MLX5_FLOW_ACTION_SET_MAC_DST (1u << 21) #define
> MLX5_FLOW_ACTION_VXLAN_ENCAP (1u << 22)
> +#define MLX5_FLOW_ACTION_VXLAN_DECAP (1u << 23)
>
> #define MLX5_FLOW_FATE_ACTIONS \
> (MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE |
> MLX5_FLOW_ACTION_RSS) diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c index 14110c5..e84a2b6 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -131,11 +131,12 @@
> return rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> "can't drop and encap in same
> flow");
> - if (action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP)
> + if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
> + MLX5_FLOW_ACTION_VXLAN_DECAP))
> return rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> - "can only have a single encap"
> - " action in a flow");
> + "can only have a single encap or"
> + " decap action in a flow");
> if (attr->ingress)
> return rte_flow_error_set(error, ENOTSUP,
>
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, @@ -146,6 +147,47 @@ }
>
> /**
> + * Validate the L2 decap action.
> + * Used for VXLAN decap action.
Same like before
> + *
> + * @param[in] action_flags
> + * Holds the actions detected until now.
> + * @param[in] action
> + * Pointer to the decap action.
> + * @param[in] attr
> + * Pointer to flow attributes
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_action_l2_decap(uint64_t action_flags,
> + const struct rte_flow_action *action __rte_unused,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> + "can't drop and decap in same
> flow");
> + if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
> + MLX5_FLOW_ACTION_VXLAN_DECAP))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> + "can only have a single encap or"
> + " decap action in a flow");
> + if (attr->egress)
> + return rte_flow_error_set(error, ENOTSUP,
> +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> + NULL,
> + "decap action not supported for "
> + "egress");
> + return 0;
> +}
> +
> +/**
> * Get the size of specific rte_flow_item_type
> *
> * @param[in] item_type
> @@ -396,6 +438,38 @@
> }
>
> /**
> + * Convert L2 decap action to DV specification.
> + * Used for VXLAN decap action.
Same
> + *
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[in] action
> + * Pointer to action structure.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * Pointer to action on success, NULL otherwise and rte_errno is set.
> + */
> +static struct ibv_flow_action *
> +flow_dv_create_action_l2_decap(struct rte_eth_dev *dev,
> + const struct rte_flow_action *action __rte_unused,
> + struct rte_flow_error *error)
> +{
> + struct ibv_flow_action *verbs_action = NULL;
> + struct priv *priv = dev->data->dev_private;
> +
> + verbs_action = mlx5_glue-
> >dv_create_flow_action_packet_reformat
> + (priv->ctx, 0, NULL,
> +
> MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
> + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> + if (!verbs_action)
> + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "cannot create L2 decap action");
> + return verbs_action;
> +}
> +
> +/**
> * Verify the @p attributes will be correctly understood by the NIC and store
> * them in the @p flow if everything is correct.
> *
> @@ -648,7 +722,15 @@
> action_flags |=
> MLX5_FLOW_ACTION_VXLAN_ENCAP;
> ++actions_n;
> break;
> -
> + case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
> + ret =
> flow_dv_validate_action_l2_decap(action_flags,
> + actions, attr,
> + error);
> + if (ret < 0)
> + return ret;
> + action_flags |=
> MLX5_FLOW_ACTION_VXLAN_DECAP;
> + ++actions_n;
> + break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
>
> RTE_FLOW_ERROR_TYPE_ACTION,
> @@ -1435,6 +1517,19 @@
> flow->actions |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
> actions_n++;
> break;
> + case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
> + dev_flow->dv.actions[actions_n].type =
> + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_action_l2_decap(dev,
> action,
> + error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.verbs_action =
> + dev_flow->dv.actions[actions_n].action;
> + flow->actions |= MLX5_FLOW_ACTION_VXLAN_DECAP;
> + actions_n++;
> + break;
> default:
> break;
> }
> --
> 1.8.3.1
Thanks, PSB.
> -----Original Message-----
> From: Shahaf Shuler
> Sent: Monday, October 29, 2018 12:03 PM
> To: Dekel Peled <dekelp@mellanox.com>; Yongseok Koh
> <yskoh@mellanox.com>
> Cc: dev@dpdk.org; Ori Kam <orika@mellanox.com>
> Subject: RE: [dpdk-dev] [PATCH v6 3/6] net/mlx5: add VXLAN decap action to
> Direct Verbs
>
> Thursday, October 25, 2018 11:08 PM, Dekel Peled:
> > Subject: [dpdk-dev] [PATCH v6 3/6] net/mlx5: add VXLAN decap action to
> > Direct Verbs
> >
> > This patch implements the VXLAN decap action in DV flow for MLX5 PMD.
> >
> > Signed-off-by: Dekel Peled <dekelp@mellanox.com>
> > ---
> > drivers/net/mlx5/mlx5_flow.h | 1 +
> > drivers/net/mlx5/mlx5_flow_dv.c | 103
> > ++++++++++++++++++++++++++++++++++++++--
> > 2 files changed, 100 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow.h
> > b/drivers/net/mlx5/mlx5_flow.h index 6e92afe..3795644 100644
> > --- a/drivers/net/mlx5/mlx5_flow.h
> > +++ b/drivers/net/mlx5/mlx5_flow.h
> > @@ -93,6 +93,7 @@
> > #define MLX5_FLOW_ACTION_SET_MAC_SRC (1u << 20) #define
> > MLX5_FLOW_ACTION_SET_MAC_DST (1u << 21) #define
> > MLX5_FLOW_ACTION_VXLAN_ENCAP (1u << 22)
> > +#define MLX5_FLOW_ACTION_VXLAN_DECAP (1u << 23)
> >
> > #define MLX5_FLOW_FATE_ACTIONS \
> > (MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE |
> > MLX5_FLOW_ACTION_RSS) diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> > b/drivers/net/mlx5/mlx5_flow_dv.c index 14110c5..e84a2b6 100644
> > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > @@ -131,11 +131,12 @@
> > return rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > "can't drop and encap in same
> > flow");
> > - if (action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP)
> > + if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
> > + MLX5_FLOW_ACTION_VXLAN_DECAP))
> > return rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > - "can only have a single encap"
> > - " action in a flow");
> > + "can only have a single encap or"
> > + " decap action in a flow");
> > if (attr->ingress)
> > return rte_flow_error_set(error, ENOTSUP,
> >
> > RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, @@ -146,6 +147,47 @@ }
> >
> > /**
> > + * Validate the L2 decap action.
> > + * Used for VXLAN decap action.
>
> Same like before
I will remove it.
>
> > + *
> > + * @param[in] action_flags
> > + * Holds the actions detected until now.
> > + * @param[in] action
> > + * Pointer to the decap action.
> > + * @param[in] attr
> > + * Pointer to flow attributes
> > + * @param[out] error
> > + * Pointer to error structure.
> > + *
> > + * @return
> > + * 0 on success, a negative errno value otherwise and rte_errno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_l2_decap(uint64_t action_flags,
> > + const struct rte_flow_action *action __rte_unused,
> > + const struct rte_flow_attr *attr,
> > + struct rte_flow_error *error)
> > +{
> > + if (action_flags & MLX5_FLOW_ACTION_DROP)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > + "can't drop and decap in same
> > flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
> > + MLX5_FLOW_ACTION_VXLAN_DECAP))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > + "can only have a single encap or"
> > + " decap action in a flow");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> > RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > + NULL,
> > + "decap action not supported for "
> > + "egress");
> > + return 0;
> > +}
> > +
> > +/**
> > * Get the size of specific rte_flow_item_type
> > *
> > * @param[in] item_type
> > @@ -396,6 +438,38 @@
> > }
> >
> > /**
> > + * Convert L2 decap action to DV specification.
> > + * Used for VXLAN decap action.
>
> Same
I will remove it.
>
> > + *
> > + * @param[in] dev
> > + * Pointer to rte_eth_dev structure.
> > + * @param[in] action
> > + * Pointer to action structure.
> > + * @param[out] error
> > + * Pointer to the error structure.
> > + *
> > + * @return
> > + * Pointer to action on success, NULL otherwise and rte_errno is set.
> > + */
> > +static struct ibv_flow_action *
> > +flow_dv_create_action_l2_decap(struct rte_eth_dev *dev,
> > + const struct rte_flow_action *action __rte_unused,
> > + struct rte_flow_error *error)
> > +{
> > + struct ibv_flow_action *verbs_action = NULL;
> > + struct priv *priv = dev->data->dev_private;
> > +
> > + verbs_action = mlx5_glue-
> > >dv_create_flow_action_packet_reformat
> > + (priv->ctx, 0, NULL,
> > +
> > MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
> > + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> > + if (!verbs_action)
> > + rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > + NULL, "cannot create L2 decap action");
> > + return verbs_action;
> > +}
> > +
> > +/**
> > * Verify the @p attributes will be correctly understood by the NIC and
> store
> > * them in the @p flow if everything is correct.
> > *
> > @@ -648,7 +722,15 @@
> > action_flags |=
> > MLX5_FLOW_ACTION_VXLAN_ENCAP;
> > ++actions_n;
> > break;
> > -
> > + case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
> > + ret =
> > flow_dv_validate_action_l2_decap(action_flags,
> > + actions, attr,
> > + error);
> > + if (ret < 0)
> > + return ret;
> > + action_flags |=
> > MLX5_FLOW_ACTION_VXLAN_DECAP;
> > + ++actions_n;
> > + break;
> > default:
> > return rte_flow_error_set(error, ENOTSUP,
> >
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > @@ -1435,6 +1517,19 @@
> > flow->actions |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
> > actions_n++;
> > break;
> > + case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
> > + dev_flow->dv.actions[actions_n].type =
> > + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> > + dev_flow->dv.actions[actions_n].action =
> > + flow_dv_create_action_l2_decap(dev,
> > action,
> > + error);
> > + if (!(dev_flow->dv.actions[actions_n].action))
> > + return -rte_errno;
> > + dev_flow->dv.verbs_action =
> > + dev_flow->dv.actions[actions_n].action;
> > + flow->actions |= MLX5_FLOW_ACTION_VXLAN_DECAP;
> > + actions_n++;
> > + break;
> > default:
> > break;
> > }
> > --
> > 1.8.3.1
@@ -93,6 +93,7 @@
#define MLX5_FLOW_ACTION_SET_MAC_SRC (1u << 20)
#define MLX5_FLOW_ACTION_SET_MAC_DST (1u << 21)
#define MLX5_FLOW_ACTION_VXLAN_ENCAP (1u << 22)
+#define MLX5_FLOW_ACTION_VXLAN_DECAP (1u << 23)
#define MLX5_FLOW_FATE_ACTIONS \
(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | MLX5_FLOW_ACTION_RSS)
@@ -131,11 +131,12 @@
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't drop and encap in same flow");
- if (action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP)
+ if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
+ MLX5_FLOW_ACTION_VXLAN_DECAP))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
- "can only have a single encap"
- " action in a flow");
+ "can only have a single encap or"
+ " decap action in a flow");
if (attr->ingress)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
@@ -146,6 +147,47 @@
}
/**
+ * Validate the L2 decap action.
+ * Used for VXLAN decap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the decap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_l2_decap(uint64_t action_flags,
+ const struct rte_flow_action *action __rte_unused,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and decap in same flow");
+ if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
+ MLX5_FLOW_ACTION_VXLAN_DECAP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single encap or"
+ " decap action in a flow");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
+ NULL,
+ "decap action not supported for "
+ "egress");
+ return 0;
+}
+
+/**
* Get the size of specific rte_flow_item_type
*
* @param[in] item_type
@@ -396,6 +438,38 @@
}
/**
+ * Convert L2 decap action to DV specification.
+ * Used for VXLAN decap action.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * Pointer to action on success, NULL otherwise and rte_errno is set.
+ */
+static struct ibv_flow_action *
+flow_dv_create_action_l2_decap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action __rte_unused,
+ struct rte_flow_error *error)
+{
+ struct ibv_flow_action *verbs_action = NULL;
+ struct priv *priv = dev->data->dev_private;
+
+ verbs_action = mlx5_glue->dv_create_flow_action_packet_reformat
+ (priv->ctx, 0, NULL,
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
+ if (!verbs_action)
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "cannot create L2 decap action");
+ return verbs_action;
+}
+
+/**
* Verify the @p attributes will be correctly understood by the NIC and store
* them in the @p flow if everything is correct.
*
@@ -648,7 +722,15 @@
action_flags |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
++actions_n;
break;
-
+ case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
+ ret = flow_dv_validate_action_l2_decap(action_flags,
+ actions, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_VXLAN_DECAP;
+ ++actions_n;
+ break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
@@ -1435,6 +1517,19 @@
flow->actions |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
actions_n++;
break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
+ dev_flow->dv.actions[actions_n].type =
+ MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+ dev_flow->dv.actions[actions_n].action =
+ flow_dv_create_action_l2_decap(dev, action,
+ error);
+ if (!(dev_flow->dv.actions[actions_n].action))
+ return -rte_errno;
+ dev_flow->dv.verbs_action =
+ dev_flow->dv.actions[actions_n].action;
+ flow->actions |= MLX5_FLOW_ACTION_VXLAN_DECAP;
+ actions_n++;
+ break;
default:
break;
}