@@ -99,6 +99,168 @@
}
/**
+ * Validate the tunnel encap action.
+ *
+ * @param[in] action_flags
+ * holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+flow_dv_validate_action_tunnel_encap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_tunnel_encap *tunnel_encap = action->conf;
+
+ if (!tunnel_encap || !(tunnel_encap->buf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and encap in same flow");
+ if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
+ MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 encap actions in same"
+ " flow");
+ if (attr->ingress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "encap action not supported for "
+ "ingress");
+ return 0;
+}
+
+/**
+ * Validate the tunnel encap L3 action
+ *
+ * @param[in] action_flags
+ * holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+flow_dv_validate_action_tunnel_encap_l3(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_tunnel_encap_l3 *tunnel_encap_l3 =
+ action->conf;
+
+ if (!tunnel_encap_l3 || !(tunnel_encap_l3->buf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and encap in same flow");
+ if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
+ MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 encap actions in same"
+ " flow");
+ if (attr->ingress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "encap action not supported for "
+ "ingress");
+ return 0;
+}
+
+/**
+ * Convert encap action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * Pointer to action on success, NULL otherwise and rte_errno is set.
+ */
+static struct ibv_flow_action *
+flow_dv_create_encap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ struct ibv_flow_action *encap_verb = NULL;
+ const struct rte_flow_action_tunnel_encap *encap_data;
+ struct priv *priv = dev->data->dev_private;
+
+ encap_data = (const struct rte_flow_action_tunnel_encap *)action->conf;
+ encap_verb = mlx5_glue->dv_create_flow_action_packet_reformat
+ (priv->ctx, encap_data->size,
+ encap_data->size ? encap_data->buf : NULL,
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
+ MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
+ if (!encap_verb)
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "cannot create encap action");
+ return encap_verb;
+}
+
+/**
+ * Convert encap L3 action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * Pointer to action on success, NULL otherwise and rte_errno is set.
+ */
+static struct ibv_flow_action *
+flow_dv_create_encap_l3(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ struct ibv_flow_action *encap_l3_verb = NULL;
+ const struct rte_flow_action_tunnel_encap_l3 *encap_l3_data;
+ struct priv *priv = dev->data->dev_private;
+
+ encap_l3_data =
+ (const struct rte_flow_action_tunnel_encap_l3 *)action->conf;
+ encap_l3_verb = mlx5_glue->dv_create_flow_action_packet_reformat
+ (priv->ctx, encap_l3_data->size,
+ encap_l3_data->size ? encap_l3_data->buf : NULL,
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L3_TUNNEL,
+ MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
+ if (!encap_l3_verb)
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "cannot create encap L3 action");
+ return encap_l3_verb;
+}
+
+/**
* Verify the @p attributes will be correctly understood by the NIC and store
* them in the @p flow if everything is correct.
*
@@ -346,6 +508,20 @@
action_flags |= MLX5_FLOW_ACTION_COUNT;
++actions_n;
break;
+ case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP:
+ ret = flow_dv_validate_action_tunnel_encap
+ (action_flags, actions, attr, error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_TUNNEL_ENCAP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP_L3:
+ ret = flow_dv_validate_action_tunnel_encap_l3
+ (action_flags, actions, attr, error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
+ break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
@@ -1054,14 +1230,23 @@
/**
* Store the requested actions in an array.
*
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
* @param[in] action
* Flow action to translate.
* @param[in, out] dev_flow
* Pointer to the mlx5_flow.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
*/
-static void
-flow_dv_create_action(const struct rte_flow_action *action,
- struct mlx5_flow *dev_flow)
+static int
+flow_dv_create_action(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
{
const struct rte_flow_action_queue *queue;
const struct rte_flow_action_rss *rss;
@@ -1108,10 +1293,35 @@
/* Added to array only in apply since we need the QP */
flow->actions |= MLX5_FLOW_ACTION_RSS;
break;
+ case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP:
+ dev_flow->dv.actions[actions_n].type =
+ MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+ dev_flow->dv.actions[actions_n].action =
+ flow_dv_create_encap(dev, action, error);
+ if (!(dev_flow->dv.actions[actions_n].action))
+ return -rte_errno;
+ dev_flow->dv.encap_verb =
+ dev_flow->dv.actions[actions_n].action;
+ flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP;
+ actions_n++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP_L3:
+ dev_flow->dv.actions[actions_n].type =
+ MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+ dev_flow->dv.actions[actions_n].action =
+ flow_dv_create_encap_l3(dev, action, error);
+ if (!(dev_flow->dv.actions[actions_n].action))
+ return -rte_errno;
+ dev_flow->dv.encap_verb =
+ dev_flow->dv.actions[actions_n].action;
+ flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
+ actions_n++;
+ break;
default:
break;
}
dev_flow->dv.actions_n = actions_n;
+ return 0;
}
static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
@@ -1275,8 +1485,10 @@
matcher.egress = attr->egress;
if (flow_dv_matcher_register(dev, &matcher, dev_flow, error))
return -rte_errno;
- for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
- flow_dv_create_action(actions, dev_flow);
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ if (flow_dv_create_action(dev, actions, dev_flow, error))
+ return -rte_errno;
+ }
return 0;
}
@@ -1460,6 +1672,11 @@
LIST_REMOVE(dev_flow, next);
if (dev_flow->dv.matcher)
flow_dv_matcher_release(dev, dev_flow->dv.matcher);
+ if (dev_flow->dv.encap_verb) {
+ claim_zero(mlx5_glue->destroy_flow_action
+ (dev_flow->dv.encap_verb));
+ dev_flow->dv.encap_verb = NULL;
+ }
rte_free(dev_flow);
}
}