[dpdk-dev] eal: remove kni file from bsdapp eal
diff mbox

Message ID 1409743120-2827-1-git-send-email-bruce.richardson@intel.com
State Accepted, archived
Headers show

Commit Message

Bruce Richardson Sept. 3, 2014, 11:18 a.m. UTC
KNI applies only to linux, so there should be no need for any kni files to
be present in the bsdapp eal folder.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 lib/librte_eal/bsdapp/eal/Makefile                 |   2 +-
 .../bsdapp/eal/include/exec-env/rte_kni_common.h   | 166 ---------------------
 2 files changed, 1 insertion(+), 167 deletions(-)
 delete mode 100644 lib/librte_eal/bsdapp/eal/include/exec-env/rte_kni_common.h

Comments

Thomas Monjalon Sept. 23, 2014, 3:38 p.m. UTC | #1
> KNI applies only to linux, so there should be no need for any kni files to
> be present in the bsdapp eal folder.
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Applied

Thanks

Patch
diff mbox

diff --git a/lib/librte_eal/bsdapp/eal/Makefile b/lib/librte_eal/bsdapp/eal/Makefile
index 8f44273..876bec7 100644
--- a/lib/librte_eal/bsdapp/eal/Makefile
+++ b/lib/librte_eal/bsdapp/eal/Makefile
@@ -84,7 +84,7 @@  CFLAGS_eal_thread.o += -Wno-return-type
 CFLAGS_eal_hpet.o += -Wno-return-type
 endif
 
-INC := rte_per_lcore.h rte_lcore.h rte_interrupts.h rte_kni_common.h
+INC := rte_per_lcore.h rte_lcore.h rte_interrupts.h
 
 SYMLINK-$(CONFIG_RTE_LIBRTE_EAL_BSDAPP)-include/exec-env := \
 	$(addprefix include/exec-env/,$(INC))
diff --git a/lib/librte_eal/bsdapp/eal/include/exec-env/rte_kni_common.h b/lib/librte_eal/bsdapp/eal/include/exec-env/rte_kni_common.h
deleted file mode 100644
index d0b82da..0000000
--- a/lib/librte_eal/bsdapp/eal/include/exec-env/rte_kni_common.h
+++ /dev/null
@@ -1,166 +0,0 @@ 
-/*-
- *   This file is provided under a dual BSD/LGPLv2 license.  When using or
- *   redistributing this file, you may do so under either license.
- *
- *   GNU LESSER GENERAL PUBLIC LICENSE
- *
- *   Copyright(c) 2007-2014 Intel Corporation. All rights reserved.
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of version 2.1 of the GNU Lesser General Public License
- *   as published by the Free Software Foundation.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *   Lesser General Public License for more details.
- *
- *   You should have received a copy of the GNU Lesser General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- *   Contact Information:
- *   Intel Corporation
- *
- *
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- *    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef _RTE_KNI_COMMON_H_
-#define _RTE_KNI_COMMON_H_
-
-#ifdef __KERNEL__
-#include <linux/if.h>
-#endif
-
-/**
- * KNI name is part of memzone name.
- */
-#define RTE_KNI_NAMESIZE 32
-
-/*
- * Request id.
- */
-enum rte_kni_req_id {
-	RTE_KNI_REQ_UNKNOWN = 0,
-	RTE_KNI_REQ_CHANGE_MTU,
-	RTE_KNI_REQ_CFG_NETWORK_IF,
-	RTE_KNI_REQ_MAX,
-};
-
-/*
- * Structure for KNI request.
- */
-struct rte_kni_request {
-	uint32_t req_id;             /**< Request id */
-	union {
-		uint32_t new_mtu;    /**< New MTU */
-		uint8_t if_up;       /**< 1: interface up, 0: interface down */
-	};
-	int32_t result;               /**< Result for processing request */
-} __attribute__((__packed__));
-
-/*
- * Fifo struct mapped in a shared memory. It describes a circular buffer FIFO
- * Write and read should wrap around. Fifo is empty when write == read
- * Writing should never overwrite the read position
- */
-struct rte_kni_fifo {
-	volatile unsigned write;     /**< Next position to be written*/
-	volatile unsigned read;      /**< Next position to be read */
-	unsigned len;                /**< Circular buffer length */
-	unsigned elem_size;          /**< Pointer size - for 32/64 bit OS */
-	void * volatile buffer[0];   /**< The buffer contains mbuf pointers */
-};
-
-/*
- * The kernel image of the rte_mbuf struct, with only the relevant fields.
- * Padding is necessary to assure the offsets of these fields
- */
-struct rte_kni_mbuf {
-	void *pool;
-	void *buf_addr;
-	char pad0[14];
-	uint16_t ol_flags;      /**< Offload features. */
-	void *next;
-	void *data;             /**< Start address of data in segment buffer. */
-	uint16_t data_len;      /**< Amount of data in segment buffer. */
-	char pad2[2];
-	uint16_t pkt_len;       /**< Total pkt len: sum of all segment data_len. */
-} __attribute__((__aligned__(64)));
-
-/*
- * Struct used to create a KNI device. Passed to the kernel in IOCTL call
- */
-
-struct rte_kni_device_info {
-	char name[RTE_KNI_NAMESIZE];  /**< Network device name for KNI */
-
-	phys_addr_t tx_phys;
-	phys_addr_t rx_phys;
-	phys_addr_t alloc_phys;
-	phys_addr_t free_phys;
-
-	/* Used by Ethtool */
-	phys_addr_t req_phys;
-	phys_addr_t resp_phys;
-	phys_addr_t sync_phys;
-	void * sync_va;
-
-	/* mbuf mempool */
-	void * mbuf_va;
-	phys_addr_t mbuf_phys;
-
-	/* PCI info */
-	uint16_t vendor_id;           /**< Vendor ID or PCI_ANY_ID. */
-	uint16_t device_id;           /**< Device ID or PCI_ANY_ID. */
-	uint8_t bus;                  /**< Device bus */
-	uint8_t devid;                /**< Device ID */
-	uint8_t function;             /**< Device function. */
-
-	uint16_t group_id;            /**< Group ID */
-	uint32_t core_id;             /**< core ID to bind for kernel thread */
-
-	uint8_t force_bind : 1;       /**< Flag for kernel thread binding */
-
-	/* mbuf size */
-	unsigned mbuf_size;
-};
-
-#define KNI_DEVICE "kni"
-
-#define RTE_KNI_IOCTL_TEST    _IOWR(0, 1, int)
-#define RTE_KNI_IOCTL_CREATE  _IOWR(0, 2, struct rte_kni_device_info)
-#define RTE_KNI_IOCTL_RELEASE _IOWR(0, 3, struct rte_kni_device_info)
-
-#endif /* _RTE_KNI_COMMON_H_ */