[dpdk-dev] i40e: workaround for X710 performance issues
Commit Message
As the fixes of below performance issues on X710 may not be integrated
in latest version of firmware, a workaround in software PMD is needed.
It is to re-configure 3 specific registers after being initialized.
- Cannot achieve line rate on X710.
- Performance reduction when promiscuous mode is disabled.
Note that this workaround can be removed if the fixes are integrated
in the firmware in future.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
lib/librte_pmd_i40e/i40e_ethdev.c | 87 +++++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
@@ -198,6 +198,7 @@ static int i40e_dev_filter_ctrl(struct rte_eth_dev *dev,
enum rte_filter_type filter_type,
enum rte_filter_op filter_op,
void *arg);
+static void i40e_configure_registers(struct i40e_hw *hw);
/* Default hash key buffer for RSS */
static uint32_t rss_key_default[I40E_PFQF_HKEY_MAX_INDEX + 1];
@@ -443,6 +444,15 @@ eth_i40e_dev_init(__rte_unused struct eth_driver *eth_drv,
/* Clear PXE mode */
i40e_clear_pxe_mode(hw);
+ /*
+ * On X710, as old version of firmwares may have performance issues,
+ * 3 registers need to be re-configured with new values. And the latest
+ * version of firmware may not contain the fixes, workaround in SW
+ * driver is needed. This workaround can be removed when the fixes are
+ * integrated in firmware in future.
+ */
+ i40e_configure_registers(hw);
+
/* Get hw capabilities */
ret = i40e_get_cap(hw);
if (ret != I40E_SUCCESS) {
@@ -5294,3 +5304,80 @@ i40e_pctype_to_flowtype(enum i40e_filter_pctype pctype)
return flowtype_table[pctype];
}
+
+static int
+i40e_debug_read_register(struct i40e_hw *hw, uint32_t addr, uint64_t *val)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aqc_debug_reg_read_write *cmd =
+ (struct i40e_aqc_debug_reg_read_write *)&desc.params.raw;
+ enum i40e_status_code status;
+
+ i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_debug_read_reg);
+ cmd->address = rte_cpu_to_le_32(addr);
+ status = i40e_asq_send_command(hw, &desc, NULL, 0, NULL);
+ if (status < 0)
+ return status;
+
+ *val = ((uint64_t)(rte_le_to_cpu_32(cmd->value_high)) << (CHAR_BIT *
+ sizeof(uint32_t))) + rte_le_to_cpu_32(cmd->value_low);
+
+ return status;
+}
+
+/*
+ * On X710, as old version of firmwares may have performance issues,
+ * 3 registers need to be re-configured with new values. And the latest version
+ * of firmware may not contain the fixes, workaround in SW driver is needed.
+ * This workaround can be removed when the fixes are integrated in firmware in
+ * future.
+ */
+static void
+i40e_configure_registers(struct i40e_hw *hw)
+{
+#define I40E_GL_SWR_PRI_JOIN_MAP_0 0x26CE00
+#define I40E_GL_SWR_PRI_JOIN_MAP_2 0x26CE08
+#define I40E_GL_SWR_PM_UP_THR 0x269FBC
+#define I40E_GL_SWR_PRI_JOIN_MAP_0_VALUE 0x10000200
+#define I40E_GL_SWR_PRI_JOIN_MAP_2_VALUE 0x011f0200
+#define I40E_GL_SWR_PM_UP_THR_VALUE 0x03030303
+
+ static const struct {
+ uint32_t addr;
+ uint64_t val;
+ } reg_table[] = {
+ {I40E_GL_SWR_PRI_JOIN_MAP_0, I40E_GL_SWR_PRI_JOIN_MAP_0_VALUE},
+ {I40E_GL_SWR_PRI_JOIN_MAP_2, I40E_GL_SWR_PRI_JOIN_MAP_2_VALUE},
+ {I40E_GL_SWR_PM_UP_THR, I40E_GL_SWR_PM_UP_THR_VALUE},
+ };
+ uint64_t reg;
+ uint32_t i;
+ int ret;
+
+ /* Below fix is for X710 only */
+ if (i40e_is_40G_device(hw->device_id))
+ return;
+
+ for (i = 0; i < RTE_DIM(reg_table); i++) {
+ ret = i40e_debug_read_register(hw, reg_table[i].addr, ®);
+ if (ret < 0) {
+ PMD_DRV_LOG(ERR, "Failed to read from 0x%x\n",
+ reg_table[i].addr);
+ break;
+ }
+ PMD_DRV_LOG(DEBUG, "Read from 0x%x: 0x%lx", reg_table[i].addr,
+ reg);
+ if (reg == reg_table[i].val)
+ continue;
+
+ ret = i40e_aq_debug_write_register(hw, reg_table[i].addr,
+ reg_table[i].val, NULL);
+ if (ret < 0) {
+ PMD_DRV_LOG(ERR, "Failed to write 0x%x to 0x%x\n",
+ reg_table[i].val, reg_table[i].addr);
+ break;
+ }
+ PMD_DRV_LOG(DEBUG, "Write to 0x%x: 0x%lx", reg_table[i].addr,
+ reg_table[i].val);
+ }
+}