[dpdk-dev,v4,6/7] librte_ether: remove the set VF API's
diff mbox

Message ID 1481629241-19500-7-git-send-email-bernard.iremonger@intel.com
State Accepted, archived
Delegated to: Ferruh Yigit
Headers show

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel compilation success Compilation OK

Commit Message

Bernard Iremonger Dec. 13, 2016, 11:40 a.m. UTC
remove the following API's:

rte_eth_dev_set_vf_rxmode
rte_eth_dev_set_vf_rx
rte_eth_dev_set_vf_tx
rte_eth_dev_set_vf_vlan_filter
rte_eth_dev_set_vf_rate_limit

Increment LIBABIVER in Makefile
Remove deprecation notice for removing rte_eth_dev_set_vf_* API's.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
 doc/guides/rel_notes/deprecation.rst   |  13 ---
 lib/librte_ether/Makefile              |   4 +-
 lib/librte_ether/rte_ethdev.c          | 129 ------------------------------
 lib/librte_ether/rte_ethdev.h          | 140 ---------------------------------
 lib/librte_ether/rte_ether_version.map |   7 +-
 5 files changed, 3 insertions(+), 290 deletions(-)

Patch
diff mbox

diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index 2d17bc6..c897c18 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -38,19 +38,6 @@  Deprecation Notices
   ``_rte_eth_dev_callback_process``. In 17.02 the function will return an ``int``
   instead of ``void`` and a fourth parameter ``void *ret_param`` will be added.
 
-* ethdev: for 17.02 it is planned to deprecate the following five functions
-  and move them in ixgbe:
-
-  ``rte_eth_dev_set_vf_rxmode``
-
-  ``rte_eth_dev_set_vf_rx``
-
-  ``rte_eth_dev_set_vf_tx``
-
-  ``rte_eth_dev_set_vf_vlan_filter``
-
-  ``rte_eth_set_vf_rate_limit``
-
 * ABI changes are planned for 17.02 in the ``rte_mbuf`` structure: some fields
   may be reordered to facilitate the writing of ``data_off``, ``refcnt``, and
   ``nb_segs`` in one operation, because some platforms have an overhead if the
diff --git a/lib/librte_ether/Makefile b/lib/librte_ether/Makefile
index efe1e5f..d23015c 100644
--- a/lib/librte_ether/Makefile
+++ b/lib/librte_ether/Makefile
@@ -1,6 +1,6 @@ 
 #   BSD LICENSE
 #
-#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
 #   All rights reserved.
 #
 #   Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,7 @@  CFLAGS += $(WERROR_FLAGS)
 
 EXPORT_MAP := rte_ether_version.map
 
-LIBABIVER := 5
+LIBABIVER := 6
 
 SRCS-y += rte_ethdev.c
 
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 1e0f206..6a93014 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -2137,32 +2137,6 @@  rte_eth_dev_default_mac_addr_set(uint8_t port_id, struct ether_addr *addr)
 	return 0;
 }
 
-int
-rte_eth_dev_set_vf_rxmode(uint8_t port_id,  uint16_t vf,
-				uint16_t rx_mode, uint8_t on)
-{
-	uint16_t num_vfs;
-	struct rte_eth_dev *dev;
-	struct rte_eth_dev_info dev_info;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-	rte_eth_dev_info_get(port_id, &dev_info);
-
-	num_vfs = dev_info.max_vfs;
-	if (vf > num_vfs) {
-		RTE_PMD_DEBUG_TRACE("set VF RX mode:invalid VF id %d\n", vf);
-		return -EINVAL;
-	}
-
-	if (rx_mode == 0) {
-		RTE_PMD_DEBUG_TRACE("set VF RX mode:mode mask ca not be zero\n");
-		return -EINVAL;
-	}
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rx_mode, -ENOTSUP);
-	return (*dev->dev_ops->set_vf_rx_mode)(dev, vf, rx_mode, on);
-}
 
 /*
  * Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
@@ -2252,76 +2226,6 @@  rte_eth_dev_uc_all_hash_table_set(uint8_t port_id, uint8_t on)
 	return (*dev->dev_ops->uc_all_hash_table_set)(dev, on);
 }
 
-int
-rte_eth_dev_set_vf_rx(uint8_t port_id, uint16_t vf, uint8_t on)
-{
-	uint16_t num_vfs;
-	struct rte_eth_dev *dev;
-	struct rte_eth_dev_info dev_info;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-	rte_eth_dev_info_get(port_id, &dev_info);
-
-	num_vfs = dev_info.max_vfs;
-	if (vf > num_vfs) {
-		RTE_PMD_DEBUG_TRACE("port %d: invalid vf id\n", port_id);
-		return -EINVAL;
-	}
-
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rx, -ENOTSUP);
-	return (*dev->dev_ops->set_vf_rx)(dev, vf, on);
-}
-
-int
-rte_eth_dev_set_vf_tx(uint8_t port_id, uint16_t vf, uint8_t on)
-{
-	uint16_t num_vfs;
-	struct rte_eth_dev *dev;
-	struct rte_eth_dev_info dev_info;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-	rte_eth_dev_info_get(port_id, &dev_info);
-
-	num_vfs = dev_info.max_vfs;
-	if (vf > num_vfs) {
-		RTE_PMD_DEBUG_TRACE("set pool tx:invalid pool id=%d\n", vf);
-		return -EINVAL;
-	}
-
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_tx, -ENOTSUP);
-	return (*dev->dev_ops->set_vf_tx)(dev, vf, on);
-}
-
-int
-rte_eth_dev_set_vf_vlan_filter(uint8_t port_id, uint16_t vlan_id,
-			       uint64_t vf_mask, uint8_t vlan_on)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-
-	if (vlan_id > ETHER_MAX_VLAN_ID) {
-		RTE_PMD_DEBUG_TRACE("VF VLAN filter:invalid VLAN id=%d\n",
-			vlan_id);
-		return -EINVAL;
-	}
-
-	if (vf_mask == 0) {
-		RTE_PMD_DEBUG_TRACE("VF VLAN filter:pool_mask can not be 0\n");
-		return -EINVAL;
-	}
-
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_vlan_filter, -ENOTSUP);
-	return (*dev->dev_ops->set_vf_vlan_filter)(dev, vlan_id,
-						   vf_mask, vlan_on);
-}
-
 int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
 					uint16_t tx_rate)
 {
@@ -2352,39 +2256,6 @@  int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
 	return (*dev->dev_ops->set_queue_rate_limit)(dev, queue_idx, tx_rate);
 }
 
-int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, uint16_t tx_rate,
-				uint64_t q_msk)
-{
-	struct rte_eth_dev *dev;
-	struct rte_eth_dev_info dev_info;
-	struct rte_eth_link link;
-
-	if (q_msk == 0)
-		return 0;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-	rte_eth_dev_info_get(port_id, &dev_info);
-	link = dev->data->dev_link;
-
-	if (vf > dev_info.max_vfs) {
-		RTE_PMD_DEBUG_TRACE("set VF rate limit:port %d: "
-				"invalid vf id=%d\n", port_id, vf);
-		return -EINVAL;
-	}
-
-	if (tx_rate > link.link_speed) {
-		RTE_PMD_DEBUG_TRACE("set VF rate limit:invalid tx_rate=%d, "
-				"bigger than link speed= %d\n",
-				tx_rate, link.link_speed);
-		return -EINVAL;
-	}
-
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_vf_rate_limit, -ENOTSUP);
-	return (*dev->dev_ops->set_vf_rate_limit)(dev, vf, tx_rate, q_msk);
-}
-
 int
 rte_eth_mirror_rule_set(uint8_t port_id,
 			struct rte_eth_mirror_conf *mirror_conf,
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 9678179..c602d7d 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1249,39 +1249,11 @@  typedef int (*eth_uc_all_hash_table_set_t)(struct rte_eth_dev *dev,
 				  uint8_t on);
 /**< @internal Set all Unicast Hash bitmap */
 
-typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev,
-				  uint16_t vf,
-				  uint16_t rx_mode,
-				  uint8_t on);
-/**< @internal Set a VF receive mode */
-
-typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev,
-				uint16_t vf,
-				uint8_t on);
-/**< @internal Set a VF receive  mode */
-
-typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev,
-				uint16_t vf,
-				uint8_t on);
-/**< @internal Enable or disable a VF transmit   */
-
-typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev,
-				  uint16_t vlan,
-				  uint64_t vf_mask,
-				  uint8_t vlan_on);
-/**< @internal Set VF VLAN pool filter */
-
 typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev,
 				uint16_t queue_idx,
 				uint16_t tx_rate);
 /**< @internal Set queue TX rate */
 
-typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
-				uint16_t vf,
-				uint16_t tx_rate,
-				uint64_t q_msk);
-/**< @internal Set VF TX rate */
-
 typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
 				  struct rte_eth_mirror_conf *mirror_conf,
 				  uint8_t rule_id,
@@ -1479,16 +1451,11 @@  struct eth_dev_ops {
 	eth_uc_all_hash_table_set_t uc_all_hash_table_set;  /**< Set Unicast hash bitmap */
 	eth_mirror_rule_set_t	   mirror_rule_set;  /**< Add a traffic mirror rule.*/
 	eth_mirror_rule_reset_t	   mirror_rule_reset;  /**< reset a traffic mirror rule.*/
-	eth_set_vf_rx_mode_t       set_vf_rx_mode;   /**< Set VF RX mode */
-	eth_set_vf_rx_t            set_vf_rx;  /**< enable/disable a VF receive */
-	eth_set_vf_tx_t            set_vf_tx;  /**< enable/disable a VF transmit */
-	eth_set_vf_vlan_filter_t   set_vf_vlan_filter;  /**< Set VF VLAN filter */
 	/** Add UDP tunnel port. */
 	eth_udp_tunnel_port_add_t udp_tunnel_port_add;
 	/** Del UDP tunnel port. */
 	eth_udp_tunnel_port_del_t udp_tunnel_port_del;
 	eth_set_queue_rate_limit_t set_queue_rate_limit;   /**< Set queue rate limit */
-	eth_set_vf_rate_limit_t    set_vf_rate_limit;   /**< Set VF rate limit */
 	/** Update redirection table. */
 	reta_update_t reta_update;
 	/** Query redirection table. */
@@ -3403,93 +3370,6 @@  int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr,
  */
 int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
 
- /**
- * Set RX L2 Filtering mode of a VF of an Ethernet device.
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @param vf
- *   VF id.
- * @param rx_mode
- *    The RX mode mask, which  is one or more of  accepting Untagged Packets,
- *    packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
- *    ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
- *    ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
- *    in rx_mode.
- * @param on
- *    1 - Enable a VF RX mode.
- *    0 - Disable a VF RX mode.
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode,
-				uint8_t on);
-
-/**
-* Enable or disable a VF traffic transmit of the Ethernet device.
-*
-* @param port
-*   The port identifier of the Ethernet device.
-* @param vf
-*   VF id.
-* @param on
-*    1 - Enable a VF traffic transmit.
-*    0 - Disable a VF traffic transmit.
-* @return
-*   - (0) if successful.
-*   - (-ENODEV) if *port_id* invalid.
-*   - (-ENOTSUP) if hardware doesn't support.
-*   - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on);
-
-/**
-* Enable or disable a VF traffic receive of an Ethernet device.
-*
-* @param port
-*   The port identifier of the Ethernet device.
-* @param vf
-*   VF id.
-* @param on
-*    1 - Enable a VF traffic receive.
-*    0 - Disable a VF traffic receive.
-* @return
-*   - (0) if successful.
-*   - (-ENOTSUP) if hardware doesn't support.
-*   - (-ENODEV) if *port_id* invalid.
-*   - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on);
-
-/**
-* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
-* received VLAN packets tagged with a given VLAN Tag Identifier.
-*
-* @param port id
-*   The port identifier of the Ethernet device.
-* @param vlan_id
-*   The VLAN Tag Identifier whose filtering must be enabled or disabled.
-* @param vf_mask
-*    Bitmap listing which VFs participate in the VLAN filtering.
-* @param vlan_on
-*    1 - Enable VFs VLAN filtering.
-*    0 - Disable VFs VLAN filtering.
-* @return
-*   - (0) if successful.
-*   - (-ENOTSUP) if hardware doesn't support.
-*   - (-ENODEV) if *port_id* invalid.
-*   - (-EINVAL) if bad parameter.
-*/
-int
-rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
-				uint64_t vf_mask,
-				uint8_t vlan_on);
-
 /**
  * Set a traffic mirroring rule on an Ethernet device
  *
@@ -3551,26 +3431,6 @@  int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
 			uint16_t tx_rate);
 
 /**
- * Set the rate limitation for a vf on an Ethernet device.
- *
- * @param port_id
- *   The port identifier of the Ethernet device.
- * @param vf
- *   VF id.
- * @param tx_rate
- *   The tx rate allocated from the total link speed for this VF id.
- * @param q_msk
- *   The queue mask which need to set the rate.
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support this feature.
- *   - (-ENODEV) if *port_id* invalid.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf,
-			uint16_t tx_rate, uint64_t q_msk);
-
-/**
  * Initialize bypass logic. This function needs to be called before
  * executing any other bypass API.
  *
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index 72be66d..7594416 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -61,10 +61,6 @@  DPDK_2.2 {
 	rte_eth_dev_set_mtu;
 	rte_eth_dev_set_rx_queue_stats_mapping;
 	rte_eth_dev_set_tx_queue_stats_mapping;
-	rte_eth_dev_set_vf_rx;
-	rte_eth_dev_set_vf_rxmode;
-	rte_eth_dev_set_vf_tx;
-	rte_eth_dev_set_vf_vlan_filter;
 	rte_eth_dev_set_vlan_offload;
 	rte_eth_dev_set_vlan_pvid;
 	rte_eth_dev_set_vlan_strip_on_queue;
@@ -94,7 +90,6 @@  DPDK_2.2 {
 	rte_eth_rx_queue_info_get;
 	rte_eth_rx_queue_setup;
 	rte_eth_set_queue_rate_limit;
-	rte_eth_set_vf_rate_limit;
 	rte_eth_stats;
 	rte_eth_stats_get;
 	rte_eth_stats_reset;
@@ -146,4 +141,4 @@  DPDK_16.11 {
 	rte_eth_dev_pci_probe;
 	rte_eth_dev_pci_remove;
 
-} DPDK_16.07;
+} DPDK_16.07;
\ No newline at end of file