diff mbox

[dpdk-dev,v2,1/4] doc: Added new commands in testpmd UG

Message ID 1416330293-2947-2-git-send-email-pablo.de.lara.guarch@intel.com (mailing list archive)
State Changes Requested, archived
Headers

Commit Message

De Lara Guarch, Pablo Nov. 18, 2014, 5:04 p.m. UTC 
  Added info in testpmd functions section for the following commands:

- tunnel_filter add
- tunnel_filter rm
- rx_vxlan_port add
- rx_vxlan_port rm
- port stop/start queue
- set port mac address filter (for VF)

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |   47 +++++++++++++++++++++++++++
 1 files changed, 47 insertions(+), 0 deletions(-)

Comments

Iremonger, Bernard Nov. 19, 2014, 1:40 p.m. UTC | #1 
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
> Sent: Tuesday, November 18, 2014 5:05 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2 1/4] doc: Added new commands in testpmd UG
> 
> Added info in testpmd functions section for the following commands:
> 
> - tunnel_filter add
> - tunnel_filter rm
> - rx_vxlan_port add
> - rx_vxlan_port rm
> - port stop/start queue
> - set port mac address filter (for VF)
> 
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Acked-by: Bernard Iremonger <bernard.iremonger@intel.com> 
I have applied the patch to my tree next/dpdk-doc.

> ---
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   47 +++++++++++++++++++++++++++
>  1 files changed, 47 insertions(+), 0 deletions(-)
>
diff mbox

Patch

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index c0d0033..8647227 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -456,6 +456,36 @@  Set the outer VLAN TPID for packet filtering on a port:
 
 rx_vlan set tpid (value) (port_id)
 
+tunnel_filter add
+~~~~~~~~~~~~~~~~~
+
+Add a tunnel filter on a port:
+
+tunnel_filter add (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+tunnel_filter remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove a tunnel filter on a port:
+
+tunnel_filter rm (port_id) (outer_mac) (inner_mac) (ip_addr) (inner_vlan)
+ (tunnel_type) (filter_type) (tenant_id) (queue_id)
+
+rx_vxlan_port add
+~~~~~~~~~~~~~~~~~
+
+Add an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port add (udp_port) (port_id)
+
+rx_vxlan_port remove
+~~~~~~~~~~~~~~~~~~~~
+
+Remove an UDP port for VXLAN packet filter on a port:
+
+rx_vxlan_port rm (udp_port) (port_id)
+
 tx_vlan set
 ~~~~~~~~~~~
 
@@ -635,6 +665,14 @@  Set VF receive/transmit from a port:
 
 set port (port_id) vf (vf_id) (rx|tx) (on|off)
 
+set port - mac address filter (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Add/Remove unicast or multicast MAC addr filter for a VF:
+
+set port (port_id) vf (vf_id) (mac_addr)
+ (exact-mac|exact-mac-vlan|hashmac|hashmac-vlan) (on|off)
+
 set port - rx mode(for VF)
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1061,6 +1099,15 @@  Close all ports or a specific port:
 
 port close (port_id|all)
 
+port start/stop queue
+~~~~~~~~~~~~~~~~~~~~~
+
+Start/stop a rx/tx queue on a specific port:
+
+port (port_id) (rxq|txq) (queue_id) (start|stop)
+
+Only take effect when port is started.
+
 port config - speed
 ~~~~~~~~~~~~~~~~~~~