@@ -1059,11 +1059,13 @@ M: Pablo de Lara <pablo.de.lara.guarch@intel.com>
F: drivers/crypto/ipsec_mb/
F: doc/guides/cryptodevs/aesni_gcm.rst
F: doc/guides/cryptodevs/aesni_mb.rst
+F: doc/guides/cryptodevs/chacha20_poly1305.rst
F: doc/guides/cryptodevs/kasumi.rst
F: doc/guides/cryptodevs/snow3g.rst
F: doc/guides/cryptodevs/zuc.rst
F: doc/guides/cryptodevs/features/aesni_gcm.ini
F: doc/guides/cryptodevs/features/aesni_mb.ini
+F: doc/guides/cryptodevs/features/chacha20_poly1305.ini
F: doc/guides/cryptodevs/features/kasumi.ini
F: doc/guides/cryptodevs/features/snow3g.ini
F: doc/guides/cryptodevs/features/zuc.ini
new file mode 100644
@@ -0,0 +1,99 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2021 Intel Corporation.
+
+Chacha20-poly1305 Crypto Poll Mode Driver
+=========================================
+
+The Chacha20-poly1305 PMD provides poll mode crypto driver support for
+utilizing `Intel IPSec Multi-buffer library <https://github.com/01org/intel-ipsec-mb>`_.
+
+Features
+--------
+
+Chacha20-poly1305 PMD has support for:
+
+AEAD algorithms:
+
+* RTE_CRYPTO_AEAD_CHACHA20_POLY1305
+
+
+Installation
+------------
+
+To build DPDK with the Chacha20-poly1305 PMD the user is required to download
+the multi-buffer library from `here <https://github.com/01org/intel-ipsec-mb>`_
+and compile it on their user system before building DPDK.
+The latest version of the library supported by this PMD is v1.0, which
+can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.0.zip>`_.
+
+After downloading the library, the user needs to unpack and compile it
+on their system before building DPDK:
+
+.. code-block:: console
+
+ make
+ make install
+
+The library requires NASM to be built. Depending on the library version, it might
+require a minimum NASM version (e.g. v0.54 requires at least NASM 2.14).
+
+NASM is packaged for different OS. However, on some OS the version is too old,
+so a manual installation is required. In that case, NASM can be downloaded from
+`NASM website <https://www.nasm.us/pub/nasm/releasebuilds/?C=M;O=D>`_.
+Once it is downloaded, extract it and follow these steps:
+
+.. code-block:: console
+
+ ./configure
+ make
+ make install
+
+.. note::
+
+ Compilation of the Multi-Buffer library is broken when GCC < 5.0, if library <= v0.53.
+ If a lower GCC version than 5.0, the workaround proposed by the following link
+ should be used: `<https://github.com/intel/intel-ipsec-mb/issues/40>`_.
+
+As a reference, the following table shows a mapping between the past DPDK versions
+and the external crypto libraries supported by them:
+
+.. _table_chacha20_poly1305_versions:
+
+.. table:: DPDK and external crypto library version compatibility
+
+ ============= ================================
+ DPDK version Crypto library version
+ ============= ================================
+ 21.11+ Multi-buffer library 1.0*
+ ============= ================================
+
+\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
+
+Initialization
+--------------
+
+In order to enable this virtual crypto PMD, user must:
+
+* Build the multi buffer library (explained in Installation section).
+
+To use the PMD in an application, user must:
+
+* Call rte_vdev_init("crypto_chacha20_poly1305") within the application.
+
+* Use --vdev="crypto_chacha20_poly1305" in the EAL options, which will call
+ rte_vdev_init() internally.
+
+The following parameters (all optional) can be provided in the previous two calls:
+
+* socket_id: Specify the socket where the memory for the device is going to be allocated
+ (by default, socket_id will be the socket where the core that is creating the PMD is running on).
+
+* max_nb_queue_pairs: Specify the maximum number of queue pairs in the device (8 by default).
+
+* max_nb_sessions: Specify the maximum number of sessions that can be created (2048 by default).
+
+Example:
+
+.. code-block:: console
+
+ --vdev="crypto_chacha20_poly1305,socket_id=0,max_nb_sessions=128"
new file mode 100644
@@ -0,0 +1,35 @@
+;
+; Supported features of the 'chacha20_poly1305' crypto driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Symmetric crypto = Y
+Sym operation chaining = Y
+Symmetric sessionless = Y
+Non-Byte aligned data = Y
+In Place SGL = Y
+OOP SGL In LB Out = Y
+OOP LB In LB Out = Y
+CPU crypto = Y
+
+;
+; Supported crypto algorithms of the 'chacha20_poly1305' crypto driver.
+;
+[Cipher]
+
+;
+; Supported authentication algorithms of the 'chacha20_poly1305' crypto driver.
+;
+[Auth]
+
+;
+; Supported AEAD algorithms of the 'chacha20_poly1305' crypto driver.
+;
+[AEAD]
+CHACHA20-POLY1305 = Y
+
+;
+; Supported Asymmetric algorithms of the 'chacha20_poly1305' crypto driver.
+;
+[Asymmetric]
@@ -16,6 +16,7 @@ Crypto Device Drivers
bcmfs
caam_jr
ccp
+ chacha20_poly1305
cnxk
dpaa2_sec
dpaa_sec
@@ -109,6 +109,7 @@ New Features
* KASUMI PMD.
* SNOW3G PMD.
* ZUC PMD.
+ * CHACHA20_POLY1305 PMD.
* **Updated the aesni_mb crypto PMD.**
@@ -49,6 +49,9 @@ extern RTE_DEFINE_PER_LCORE(IMB_MGR *, mb_mgr);
#define CRYPTODEV_NAME_ZUC_PMD crypto_zuc
/**< IPSEC Multi buffer PMD zuc device name */
+#define CRYPTODEV_NAME_CHACHA20_POLY1305_PMD crypto_chacha20_poly1305
+/**< IPSEC Multi buffer PMD chacha20_poly1305 device name */
+
/** PMD LOGTYPE DRIVER, common to all PMDs */
extern int ipsec_mb_logtype_driver;
#define IPSEC_MB_LOG(level, fmt, ...) \
@@ -62,6 +65,7 @@ enum ipsec_mb_pmd_types {
IPSEC_MB_PMD_TYPE_KASUMI,
IPSEC_MB_PMD_TYPE_SNOW3G,
IPSEC_MB_PMD_TYPE_ZUC,
+ IPSEC_MB_PMD_TYPE_CHACHA20_POLY1305,
IPSEC_MB_N_PMD_TYPES
};
@@ -85,6 +89,7 @@ extern uint8_t pmd_driver_id_aesni_gcm;
extern uint8_t pmd_driver_id_kasumi;
extern uint8_t pmd_driver_id_snow3g;
extern uint8_t pmd_driver_id_zuc;
+extern uint8_t pmd_driver_id_chacha20_poly1305;
/** Helper function. Gets driver ID based on PMD type */
static __rte_always_inline uint8_t
@@ -101,6 +106,8 @@ ipsec_mb_get_driver_id(enum ipsec_mb_pmd_types pmd_type)
return pmd_driver_id_snow3g;
case IPSEC_MB_PMD_TYPE_ZUC:
return pmd_driver_id_zuc;
+ case IPSEC_MB_PMD_TYPE_CHACHA20_POLY1305:
+ return pmd_driver_id_chacha20_poly1305;
default:
break;
}
@@ -25,6 +25,7 @@ sources = files('ipsec_mb_private.c',
'ipsec_mb_ops.c',
'pmd_aesni_mb.c',
'pmd_aesni_gcm.c',
+ 'pmd_chacha_poly.c',
'pmd_kasumi.c',
'pmd_snow3g.c',
'pmd_zuc.c'
new file mode 100644
@@ -0,0 +1,408 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2021 Intel Corporation
+ */
+
+#include "pmd_chacha_poly_priv.h"
+
+/** Parse crypto xform chain and set private session parameters. */
+static int
+chacha20_poly1305_session_configure(IMB_MGR * mb_mgr __rte_unused,
+ void *priv_sess, const struct rte_crypto_sym_xform *xform)
+{
+ struct chacha20_poly1305_session *sess = priv_sess;
+ const struct rte_crypto_sym_xform *auth_xform;
+ const struct rte_crypto_sym_xform *cipher_xform;
+ const struct rte_crypto_sym_xform *aead_xform;
+
+ uint8_t key_length;
+ const uint8_t *key;
+ enum ipsec_mb_operation mode;
+ int ret = 0;
+
+ ret = ipsec_mb_parse_xform(xform, &mode, &auth_xform,
+ &cipher_xform, &aead_xform);
+ if (ret)
+ return ret;
+
+ sess->op = mode;
+
+ switch (sess->op) {
+ case IPSEC_MB_OP_AEAD_AUTHENTICATED_ENCRYPT:
+ case IPSEC_MB_OP_AEAD_AUTHENTICATED_DECRYPT:
+ if (aead_xform->aead.algo !=
+ RTE_CRYPTO_AEAD_CHACHA20_POLY1305) {
+ IPSEC_MB_LOG(ERR,
+ "The only combined operation supported is CHACHA20 POLY1305");
+ ret = -ENOTSUP;
+ goto error_exit;
+ }
+ /* Set IV parameters */
+ sess->iv.offset = aead_xform->aead.iv.offset;
+ sess->iv.length = aead_xform->aead.iv.length;
+ key_length = aead_xform->aead.key.length;
+ key = aead_xform->aead.key.data;
+ sess->aad_length = aead_xform->aead.aad_length;
+ sess->req_digest_length = aead_xform->aead.digest_length;
+ break;
+ default:
+ IPSEC_MB_LOG(
+ ERR, "Wrong xform type, has to be AEAD or authentication");
+ ret = -ENOTSUP;
+ goto error_exit;
+ }
+
+ /* IV check */
+ if (sess->iv.length != CHACHA20_POLY1305_IV_LENGTH &&
+ sess->iv.length != 0) {
+ IPSEC_MB_LOG(ERR, "Wrong IV length");
+ ret = -EINVAL;
+ goto error_exit;
+ }
+
+ /* Check key length */
+ if (key_length != CHACHA20_POLY1305_KEY_SIZE) {
+ IPSEC_MB_LOG(ERR, "Invalid key length");
+ ret = -EINVAL;
+ goto error_exit;
+ } else {
+ memcpy(sess->key, key, CHACHA20_POLY1305_KEY_SIZE);
+ }
+
+ /* Digest check */
+ if (sess->req_digest_length != CHACHA20_POLY1305_DIGEST_LENGTH) {
+ IPSEC_MB_LOG(ERR, "Invalid digest length");
+ ret = -EINVAL;
+ goto error_exit;
+ } else {
+ sess->gen_digest_length = CHACHA20_POLY1305_DIGEST_LENGTH;
+ }
+
+error_exit:
+ return ret;
+}
+
+/**
+ * Process a crypto operation, calling
+ * the direct chacha poly API from the multi buffer library.
+ *
+ * @param qp queue pair
+ * @param op symmetric crypto operation
+ * @param session chacha poly session
+ *
+ * @return
+ * - Return 0 if success
+ */
+static int
+chacha20_poly1305_crypto_op(struct ipsec_mb_qp *qp, struct rte_crypto_op *op,
+ struct chacha20_poly1305_session *session)
+{
+ struct chacha20_poly1305_qp_data *qp_data =
+ ipsec_mb_get_qp_private_data(qp);
+ uint8_t *src, *dst;
+ uint8_t *iv_ptr;
+ struct rte_crypto_sym_op *sym_op = op->sym;
+ struct rte_mbuf *m_src = sym_op->m_src;
+ uint32_t offset, data_offset, data_length;
+ uint32_t part_len, data_len;
+ int total_len;
+ uint8_t *tag;
+ unsigned int oop = 0;
+
+ offset = sym_op->aead.data.offset;
+ data_offset = offset;
+ data_length = sym_op->aead.data.length;
+ RTE_ASSERT(m_src != NULL);
+
+ while (offset >= m_src->data_len && data_length != 0) {
+ offset -= m_src->data_len;
+ m_src = m_src->next;
+
+ RTE_ASSERT(m_src != NULL);
+ }
+
+ src = rte_pktmbuf_mtod_offset(m_src, uint8_t *, offset);
+
+ data_len = m_src->data_len - offset;
+ part_len = (data_len < data_length) ? data_len :
+ data_length;
+
+ /* In-place */
+ if (sym_op->m_dst == NULL || (sym_op->m_dst == sym_op->m_src))
+ dst = src;
+ /* Out-of-place */
+ else {
+ oop = 1;
+ /* Segmented destination buffer is not supported
+ * if operation is Out-of-place
+ */
+ RTE_ASSERT(rte_pktmbuf_is_contiguous(sym_op->m_dst));
+ dst = rte_pktmbuf_mtod_offset(sym_op->m_dst, uint8_t *,
+ data_offset);
+ }
+
+ iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
+ session->iv.offset);
+
+ IMB_CHACHA20_POLY1305_INIT(qp->mb_mgr, session->key,
+ &qp_data->chacha20_poly1305_ctx_data,
+ iv_ptr, sym_op->aead.aad.data,
+ (uint64_t)session->aad_length);
+
+ if (session->op == IPSEC_MB_OP_AEAD_AUTHENTICATED_ENCRYPT) {
+ IMB_CHACHA20_POLY1305_ENC_UPDATE(qp->mb_mgr,
+ session->key,
+ &qp_data->chacha20_poly1305_ctx_data,
+ dst, src, (uint64_t)part_len);
+ total_len = data_length - part_len;
+
+ while (total_len) {
+ m_src = m_src->next;
+ RTE_ASSERT(m_src != NULL);
+
+ src = rte_pktmbuf_mtod(m_src, uint8_t *);
+ if (oop)
+ dst += part_len;
+ else
+ dst = src;
+ part_len = (m_src->data_len < total_len) ?
+ m_src->data_len : total_len;
+
+ if (dst == NULL || src == NULL) {
+ IPSEC_MB_LOG(ERR, "Invalid src or dst input");
+ return -EINVAL;
+ }
+ IMB_CHACHA20_POLY1305_ENC_UPDATE(qp->mb_mgr,
+ session->key,
+ &qp_data->chacha20_poly1305_ctx_data,
+ dst, src, (uint64_t)part_len);
+ total_len -= part_len;
+ if (total_len < 0) {
+ IPSEC_MB_LOG(ERR, "Invalid part len");
+ return -EINVAL;
+ }
+ }
+
+ tag = sym_op->aead.digest.data;
+ IMB_CHACHA20_POLY1305_ENC_FINALIZE(qp->mb_mgr,
+ &qp_data->chacha20_poly1305_ctx_data,
+ tag, session->gen_digest_length);
+
+ } else {
+ IMB_CHACHA20_POLY1305_DEC_UPDATE(qp->mb_mgr,
+ session->key,
+ &qp_data->chacha20_poly1305_ctx_data,
+ dst, src, (uint64_t)part_len);
+
+ total_len = data_length - part_len;
+
+ while (total_len) {
+ m_src = m_src->next;
+
+ RTE_ASSERT(m_src != NULL);
+
+ src = rte_pktmbuf_mtod(m_src, uint8_t *);
+ if (oop)
+ dst += part_len;
+ else
+ dst = src;
+ part_len = (m_src->data_len < total_len) ?
+ m_src->data_len : total_len;
+
+ if (dst == NULL || src == NULL) {
+ IPSEC_MB_LOG(ERR, "Invalid src or dst input");
+ return -EINVAL;
+ }
+ IMB_CHACHA20_POLY1305_DEC_UPDATE(qp->mb_mgr,
+ session->key,
+ &qp_data->chacha20_poly1305_ctx_data,
+ dst, src, (uint64_t)part_len);
+ total_len -= part_len;
+ if (total_len < 0) {
+ IPSEC_MB_LOG(ERR, "Invalid part len");
+ return -EINVAL;
+ }
+ }
+
+ tag = qp_data->temp_digest;
+ IMB_CHACHA20_POLY1305_DEC_FINALIZE(qp->mb_mgr,
+ &qp_data->chacha20_poly1305_ctx_data,
+ tag, session->gen_digest_length);
+ }
+
+ return 0;
+}
+
+/**
+ * Process a completed chacha poly op
+ *
+ * @param qp Queue Pair to process
+ * @param op Crypto operation
+ * @param sess Crypto session
+ *
+ * @return
+ * - void
+ */
+static void
+post_process_chacha20_poly1305_crypto_op(struct ipsec_mb_qp *qp,
+ struct rte_crypto_op *op,
+ struct chacha20_poly1305_session *session)
+{
+ struct chacha20_poly1305_qp_data *qp_data =
+ ipsec_mb_get_qp_private_data(qp);
+
+ op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+ /* Verify digest if required */
+ if (session->op == IPSEC_MB_OP_AEAD_AUTHENTICATED_DECRYPT ||
+ session->op == IPSEC_MB_OP_HASH_VERIFY_ONLY) {
+ uint8_t *digest = op->sym->aead.digest.data;
+ uint8_t *tag = qp_data->temp_digest;
+
+#ifdef RTE_LIBRTE_PMD_CHACHA20_POLY1305_DEBUG
+ rte_hexdump(stdout, "auth tag (orig):",
+ digest, session->req_digest_length);
+ rte_hexdump(stdout, "auth tag (calc):",
+ tag, session->req_digest_length);
+#endif
+ if (memcmp(tag, digest, session->req_digest_length) != 0)
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+
+ }
+
+}
+
+/**
+ * Process a completed Chacha20_poly1305 request
+ *
+ * @param qp Queue Pair to process
+ * @param op Crypto operation
+ * @param sess Crypto session
+ *
+ * @return
+ * - void
+ */
+static void
+handle_completed_chacha20_poly1305_crypto_op(struct ipsec_mb_qp *qp,
+ struct rte_crypto_op *op,
+ struct chacha20_poly1305_session *sess)
+{
+ post_process_chacha20_poly1305_crypto_op(qp, op, sess);
+
+ /* Free session if a session-less crypto op */
+ if (op->sess_type == RTE_CRYPTO_OP_SESSIONLESS) {
+ memset(sess, 0, sizeof(struct chacha20_poly1305_session));
+ memset(op->sym->session, 0,
+ rte_cryptodev_sym_get_existing_header_session_size(
+ op->sym->session));
+ rte_mempool_put(qp->sess_mp_priv, sess);
+ rte_mempool_put(qp->sess_mp, op->sym->session);
+ op->sym->session = NULL;
+ }
+}
+
+static uint16_t
+chacha20_poly1305_pmd_dequeue_burst(void *queue_pair,
+ struct rte_crypto_op **ops, uint16_t nb_ops)
+{
+ struct chacha20_poly1305_session *sess;
+ struct ipsec_mb_qp *qp = queue_pair;
+
+ int retval = 0;
+ unsigned int i = 0, nb_dequeued;
+
+ nb_dequeued = rte_ring_dequeue_burst(qp->ingress_queue,
+ (void **)ops, nb_ops, NULL);
+
+ for (i = 0; i < nb_dequeued; i++) {
+
+ sess = ipsec_mb_get_session_private(qp, ops[i]);
+ if (unlikely(sess == NULL)) {
+ ops[i]->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
+ qp->stats.dequeue_err_count++;
+ break;
+ }
+
+ retval = chacha20_poly1305_crypto_op(qp, ops[i], sess);
+ if (retval < 0) {
+ ops[i]->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
+ qp->stats.dequeue_err_count++;
+ break;
+ }
+
+ handle_completed_chacha20_poly1305_crypto_op(qp, ops[i], sess);
+ }
+
+ qp->stats.dequeued_count += i;
+
+ return i;
+}
+
+struct rte_cryptodev_ops chacha20_poly1305_pmd_ops = {
+ .dev_configure = ipsec_mb_config,
+ .dev_start = ipsec_mb_start,
+ .dev_stop = ipsec_mb_stop,
+ .dev_close = ipsec_mb_close,
+
+ .stats_get = ipsec_mb_stats_get,
+ .stats_reset = ipsec_mb_stats_reset,
+
+ .dev_infos_get = ipsec_mb_info_get,
+
+ .queue_pair_setup = ipsec_mb_qp_setup,
+ .queue_pair_release = ipsec_mb_qp_release,
+
+ .sym_session_get_size = ipsec_mb_sym_session_get_size,
+ .sym_session_configure = ipsec_mb_sym_session_configure,
+ .sym_session_clear = ipsec_mb_sym_session_clear
+};
+
+struct rte_cryptodev_ops *rte_chacha20_poly1305_pmd_ops =
+ &chacha20_poly1305_pmd_ops;
+
+static int
+chacha20_poly1305_probe(struct rte_vdev_device *vdev)
+{
+ return ipsec_mb_create(vdev, IPSEC_MB_PMD_TYPE_CHACHA20_POLY1305);
+}
+
+static struct rte_vdev_driver cryptodev_chacha20_poly1305_pmd_drv = {
+ .probe = chacha20_poly1305_probe,
+ .remove = ipsec_mb_remove
+};
+
+static struct cryptodev_driver chacha20_poly1305_crypto_drv;
+
+RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_CHACHA20_POLY1305_PMD,
+ cryptodev_chacha20_poly1305_pmd_drv);
+RTE_PMD_REGISTER_ALIAS(CRYPTODEV_NAME_CHACHA20_POLY1305_PMD,
+ cryptodev_chacha20_poly1305_pmd);
+RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_CHACHA20_POLY1305_PMD,
+ "max_nb_queue_pairs=<int> socket_id=<int>");
+RTE_PMD_REGISTER_CRYPTO_DRIVER(chacha20_poly1305_crypto_drv,
+ cryptodev_chacha20_poly1305_pmd_drv.driver,
+ pmd_driver_id_chacha20_poly1305);
+
+/* Constructor function to register chacha20_poly1305 PMD */
+RTE_INIT(ipsec_mb_register_chacha20_poly1305)
+{
+ struct ipsec_mb_internals *chacha_poly_data
+ = &ipsec_mb_pmds[IPSEC_MB_PMD_TYPE_CHACHA20_POLY1305];
+
+ chacha_poly_data->caps = chacha20_poly1305_capabilities;
+ chacha_poly_data->dequeue_burst = chacha20_poly1305_pmd_dequeue_burst;
+ chacha_poly_data->feature_flags =
+ RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+ RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
+ RTE_CRYPTODEV_FF_IN_PLACE_SGL |
+ RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT |
+ RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT |
+ RTE_CRYPTODEV_FF_SYM_CPU_CRYPTO |
+ RTE_CRYPTODEV_FF_SYM_SESSIONLESS;
+ chacha_poly_data->internals_priv_size = 0;
+ chacha_poly_data->ops = &chacha20_poly1305_pmd_ops;
+ chacha_poly_data->qp_priv_size =
+ sizeof(struct chacha20_poly1305_qp_data);
+ chacha_poly_data->session_configure =
+ chacha20_poly1305_session_configure;
+ chacha_poly_data->session_priv_size =
+ sizeof(struct chacha20_poly1305_session);
+}
new file mode 100644
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2021 Intel Corporation
+ */
+
+#ifndef _PMD_CHACHA_POLY_PRIV_H_
+#define _PMD_CHACHA_POLY_PRIV_H_
+
+#include "ipsec_mb_private.h"
+
+#define CHACHA20_POLY1305_IV_LENGTH 12
+#define CHACHA20_POLY1305_DIGEST_LENGTH 16
+#define CHACHA20_POLY1305_KEY_SIZE 32
+
+static const
+struct rte_cryptodev_capabilities chacha20_poly1305_capabilities[] = {
+ {/* CHACHA20-POLY1305 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AEAD,
+ {.aead = {
+ .algo = RTE_CRYPTO_AEAD_CHACHA20_POLY1305,
+ .block_size = 64,
+ .key_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0},
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0},
+ .aad_size = {
+ .min = 0,
+ .max = 240,
+ .increment = 1},
+ .iv_size = {
+ .min = 12,
+ .max = 12,
+ .increment = 0},
+ },
+ }
+ },}
+ },
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+uint8_t pmd_driver_id_chacha20_poly1305;
+
+/** CHACHA20 POLY1305 private session structure */
+struct chacha20_poly1305_session {
+ struct {
+ uint16_t length;
+ uint16_t offset;
+ } iv;
+ /**< IV parameters */
+ uint16_t aad_length;
+ /**< AAD length */
+ uint16_t req_digest_length;
+ /**< Requested digest length */
+ uint16_t gen_digest_length;
+ /**< Generated digest length */
+ uint8_t key[CHACHA20_POLY1305_KEY_SIZE];
+ enum ipsec_mb_operation op;
+} __rte_cache_aligned;
+
+struct chacha20_poly1305_qp_data {
+ struct chacha20_poly1305_context_data chacha20_poly1305_ctx_data;
+ uint8_t temp_digest[CHACHA20_POLY1305_DIGEST_LENGTH];
+ /**< Buffer used to store the digest generated
+ * by the driver when verifying a digest provided
+ * by the user (using authentication verify operation)
+ */
+};
+
+#endif /* _PMD_CHACHA_POLY_PRIV_H_ */