net/ixgbe: do not return internal code in rte_eth_dev_reset
Checks
Commit Message
In case of a temporary failure the ixgbe driver can return the internal
error IXGBE_ERR_RESET_FAILED to the application. Instead, return
-EAGAIN as per the public API specification.
Signed-off-by: Luca Boccassi <bluca@debian.org>
---
drivers/net/ixgbe/base/ixgbe_vf.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
Comments
> -----Original Message-----
> From: Luca Boccassi [mailto:bluca@debian.org]
> Sent: Tuesday, August 21, 2018 12:07 PM
> To: dev@dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin <konstantin.ananyev@intel.com>
> Subject: [PATCH] net/ixgbe: do not return internal code in rte_eth_dev_reset
>
> In case of a temporary failure the ixgbe driver can return the internal
> error IXGBE_ERR_RESET_FAILED to the application. Instead, return
> -EAGAIN as per the public API specification.
>
> Signed-off-by: Luca Boccassi <bluca@debian.org>
> ---
> drivers/net/ixgbe/base/ixgbe_vf.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c b/drivers/net/ixgbe/base/ixgbe_vf.c
> index 5b25a6b4d4..62f2bf2e7d 100644
> --- a/drivers/net/ixgbe/base/ixgbe_vf.c
> +++ b/drivers/net/ixgbe/base/ixgbe_vf.c
> @@ -203,8 +203,13 @@ s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw)
> usec_delay(5);
> }
>
> + /*
> + * This error code will be propagated to the app by rte_eth_dev_reset,
> + * so use a public error code rather than the internal-only
> + * IXGBE_ERR_RESET_FAILED
> + */
> if (!timeout)
> - return IXGBE_ERR_RESET_FAILED;
> + return -EAGAIN;
>
> /* Reset VF registers to initial values */
> ixgbe_virt_clr_reg(hw);
> --
> 2.18.0
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Luca Boccassi
> Sent: Tuesday, August 21, 2018 7:07 PM
> To: dev@dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> <konstantin.ananyev@intel.com>
> Subject: [dpdk-dev] [PATCH] net/ixgbe: do not return internal code in
> rte_eth_dev_reset
>
> In case of a temporary failure the ixgbe driver can return the internal error
> IXGBE_ERR_RESET_FAILED to the application. Instead, return -EAGAIN as per
> the public API specification.
>
> Signed-off-by: Luca Boccassi <bluca@debian.org>
> ---
> drivers/net/ixgbe/base/ixgbe_vf.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c
> b/drivers/net/ixgbe/base/ixgbe_vf.c
> index 5b25a6b4d4..62f2bf2e7d 100644
> --- a/drivers/net/ixgbe/base/ixgbe_vf.c
> +++ b/drivers/net/ixgbe/base/ixgbe_vf.c
> @@ -203,8 +203,13 @@ s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw)
> usec_delay(5);
> }
>
> + /*
> + * This error code will be propagated to the app by rte_eth_dev_reset,
> + * so use a public error code rather than the internal-only
> + * IXGBE_ERR_RESET_FAILED
> + */
> if (!timeout)
> - return IXGBE_ERR_RESET_FAILED;
> + return -EAGAIN;
I think it's better not to change this in base code which are assumed to only return IXGBE_ERR_xxx
And also this is not the only place in ixgbe_reset_hw_vf that will propagated the internal error.
Why not convert it in "eth_ixgbevf_dev_init" which looks like a right place?
>
> /* Reset VF registers to initial values */
> ixgbe_virt_clr_reg(hw);
> --
> 2.18.0
On Mon, 2018-09-03 at 12:54 +0000, Zhang, Qi Z wrote:
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Luca Boccassi
> > Sent: Tuesday, August 21, 2018 7:07 PM
> > To: dev@dpdk.org
> > Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> > <konstantin.ananyev@intel.com>
> > Subject: [dpdk-dev] [PATCH] net/ixgbe: do not return internal code
> > in
> > rte_eth_dev_reset
> >
> > In case of a temporary failure the ixgbe driver can return the
> > internal error
> > IXGBE_ERR_RESET_FAILED to the application. Instead, return -EAGAIN
> > as per
> > the public API specification.
> >
> > Signed-off-by: Luca Boccassi <bluca@debian.org>
> > ---
> > drivers/net/ixgbe/base/ixgbe_vf.c | 7 ++++++-
> > 1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c
> > b/drivers/net/ixgbe/base/ixgbe_vf.c
> > index 5b25a6b4d4..62f2bf2e7d 100644
> > --- a/drivers/net/ixgbe/base/ixgbe_vf.c
> > +++ b/drivers/net/ixgbe/base/ixgbe_vf.c
> > @@ -203,8 +203,13 @@ s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw)
> > usec_delay(5);
> > }
> >
> > + /*
> > + * This error code will be propagated to the app by
> > rte_eth_dev_reset,
> > + * so use a public error code rather than the internal-
> > only
> > + * IXGBE_ERR_RESET_FAILED
> > + */
> > if (!timeout)
> > - return IXGBE_ERR_RESET_FAILED;
> > + return -EAGAIN;
>
> I think it's better not to change this in base code which are assumed
> to only return IXGBE_ERR_xxx
> And also this is not the only place in ixgbe_reset_hw_vf that will
> propagated the internal error.
> Why not convert it in "eth_ixgbevf_dev_init" which looks like a right
> place?
Ok, done in v2
@@ -203,8 +203,13 @@ s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw)
usec_delay(5);
}
+ /*
+ * This error code will be propagated to the app by rte_eth_dev_reset,
+ * so use a public error code rather than the internal-only
+ * IXGBE_ERR_RESET_FAILED
+ */
if (!timeout)
- return IXGBE_ERR_RESET_FAILED;
+ return -EAGAIN;
/* Reset VF registers to initial values */
ixgbe_virt_clr_reg(hw);