[v2,7/8] net/virtio: add IN_ORDER Rx/Tx into selection
Checks
Commit Message
After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
logic.
Rx path select logic: If IN_ORDER is disabled will select normal Rx
path. If IN_ORDER is enabled, Rx offload and merge-able are disabled
will select simple Rx path. Otherwise will select IN_ORDER Rx path.
Tx path select logic: If IN_ORDER is disabled will select normal Tx
path. If IN_ORDER is enabled and merge-able is disabled will select
simple Tx path. Otherwise will select IN_ORDER Tx path.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Comments
On 06/25/2018 05:17 PM, Marvin Liu wrote:
> After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
> logic.
>
> Rx path select logic: If IN_ORDER is disabled will select normal Rx
> path. If IN_ORDER is enabled, Rx offload and merge-able are disabled
> will select simple Rx path. Otherwise will select IN_ORDER Rx path.
>
> Tx path select logic: If IN_ORDER is disabled will select normal Tx
> path. If IN_ORDER is enabled and merge-able is disabled will select
> simple Tx path. Otherwise will select IN_ORDER Tx path.
>
> Signed-off-by: Marvin Liu <yong.liu@intel.com>
>
> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> index df50a571a..f48a84a11 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -1320,6 +1320,11 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
> PMD_INIT_LOG(INFO, "virtio: using simple Rx path on port %u",
> eth_dev->data->port_id);
> eth_dev->rx_pkt_burst = virtio_recv_pkts_vec;
> + } else if (hw->use_inorder_rx) {
> + PMD_INIT_LOG(INFO,
> + "virtio: using inorder mergeable buffer Rx path on port %u",
> + eth_dev->data->port_id);
> + eth_dev->rx_pkt_burst = &virtio_recv_mergeable_pkts_inorder;
> } else if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> PMD_INIT_LOG(INFO,
> "virtio: using mergeable buffer Rx path on port %u",
> @@ -1335,6 +1340,10 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
> PMD_INIT_LOG(INFO, "virtio: using simple Tx path on port %u",
> eth_dev->data->port_id);
> eth_dev->tx_pkt_burst = virtio_xmit_pkts_simple;
> + } else if (hw->use_inorder_tx) {
> + PMD_INIT_LOG(INFO, "virtio: using inorder Tx path on port %u",
> + eth_dev->data->port_id);
> + eth_dev->tx_pkt_burst = virtio_xmit_pkts_inorder;
> } else {
> PMD_INIT_LOG(INFO, "virtio: using standard Tx path on port %u",
> eth_dev->data->port_id);
> @@ -1871,23 +1880,25 @@ virtio_dev_configure(struct rte_eth_dev *dev)
>
> rte_spinlock_init(&hw->state_lock);
>
> - hw->use_simple_rx = 1;
> - hw->use_simple_tx = 1;
> -
> #if defined RTE_ARCH_ARM64 || defined RTE_ARCH_ARM
> if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON)) {
> hw->use_simple_rx = 0;
> hw->use_simple_tx = 0;
> }
> #endif
> - if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> - hw->use_simple_rx = 0;
> - hw->use_simple_tx = 0;
> - }
> + if (vtpci_with_feature(hw, VIRTIO_F_IN_ORDER)) {
> + if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> + hw->use_inorder_rx = 1;
> + hw->use_inorder_tx = 1;
> + } else {
> + hw->use_simple_rx = 1;
> + hw->use_simple_tx = 1;
> + }
>
> - if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
> - DEV_RX_OFFLOAD_TCP_CKSUM))
> - hw->use_simple_rx = 0;
> + if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
> + DEV_RX_OFFLOAD_TCP_CKSUM))
> + hw->use_inorder_rx = 1;
Isn't there a problem here if mrg_rxbuf has been negotiated?
> + }
>
> return 0;
> }
>
> -----Original Message-----
> From: Maxime Coquelin [mailto:maxime.coquelin@redhat.com]
> Sent: Wednesday, June 27, 2018 4:20 PM
> To: Liu, Yong <yong.liu@intel.com>; Bie, Tiwei <tiwei.bie@intel.com>
> Cc: Wang, Zhihong <zhihong.wang@intel.com>; dev@dpdk.org
> Subject: Re: [PATCH v2 7/8] net/virtio: add IN_ORDER Rx/Tx into selection
>
>
>
> On 06/25/2018 05:17 PM, Marvin Liu wrote:
> > After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
> > logic.
> >
> > Rx path select logic: If IN_ORDER is disabled will select normal Rx
> > path. If IN_ORDER is enabled, Rx offload and merge-able are disabled
> > will select simple Rx path. Otherwise will select IN_ORDER Rx path.
> >
> > Tx path select logic: If IN_ORDER is disabled will select normal Tx
> > path. If IN_ORDER is enabled and merge-able is disabled will select
> > simple Tx path. Otherwise will select IN_ORDER Tx path.
> >
> > Signed-off-by: Marvin Liu <yong.liu@intel.com>
> >
> > diff --git a/drivers/net/virtio/virtio_ethdev.c
> b/drivers/net/virtio/virtio_ethdev.c
> > index df50a571a..f48a84a11 100644
> > --- a/drivers/net/virtio/virtio_ethdev.c
> > +++ b/drivers/net/virtio/virtio_ethdev.c
> > @@ -1320,6 +1320,11 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
> > PMD_INIT_LOG(INFO, "virtio: using simple Rx path on port %u",
> > eth_dev->data->port_id);
> > eth_dev->rx_pkt_burst = virtio_recv_pkts_vec;
> > + } else if (hw->use_inorder_rx) {
> > + PMD_INIT_LOG(INFO,
> > + "virtio: using inorder mergeable buffer Rx path on
> port %u",
> > + eth_dev->data->port_id);
> > + eth_dev->rx_pkt_burst = &virtio_recv_mergeable_pkts_inorder;
> > } else if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> > PMD_INIT_LOG(INFO,
> > "virtio: using mergeable buffer Rx path on port %u",
> > @@ -1335,6 +1340,10 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
> > PMD_INIT_LOG(INFO, "virtio: using simple Tx path on port %u",
> > eth_dev->data->port_id);
> > eth_dev->tx_pkt_burst = virtio_xmit_pkts_simple;
> > + } else if (hw->use_inorder_tx) {
> > + PMD_INIT_LOG(INFO, "virtio: using inorder Tx path on port %u",
> > + eth_dev->data->port_id);
> > + eth_dev->tx_pkt_burst = virtio_xmit_pkts_inorder;
> > } else {
> > PMD_INIT_LOG(INFO, "virtio: using standard Tx path on port %u",
> > eth_dev->data->port_id);
> > @@ -1871,23 +1880,25 @@ virtio_dev_configure(struct rte_eth_dev *dev)
> >
> > rte_spinlock_init(&hw->state_lock);
> >
> > - hw->use_simple_rx = 1;
> > - hw->use_simple_tx = 1;
> > -
> > #if defined RTE_ARCH_ARM64 || defined RTE_ARCH_ARM
> > if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON)) {
> > hw->use_simple_rx = 0;
> > hw->use_simple_tx = 0;
> > }
> > #endif
> > - if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> > - hw->use_simple_rx = 0;
> > - hw->use_simple_tx = 0;
> > - }
> > + if (vtpci_with_feature(hw, VIRTIO_F_IN_ORDER)) {
> > + if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> > + hw->use_inorder_rx = 1;
> > + hw->use_inorder_tx = 1;
> > + } else {
> > + hw->use_simple_rx = 1;
> > + hw->use_simple_tx = 1;
> > + }
> >
> > - if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
> > - DEV_RX_OFFLOAD_TCP_CKSUM))
> > - hw->use_simple_rx = 0;
> > + if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
> > + DEV_RX_OFFLOAD_TCP_CKSUM))
> > + hw->use_inorder_rx = 1;
> Isn't there a problem here if mrg_rxbuf has been negotiated?
>
That's the problem, has changed selection logic in v3. Thanks for review.
> > + }
> >
> > return 0;
> > }
> >
@@ -1320,6 +1320,11 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
PMD_INIT_LOG(INFO, "virtio: using simple Rx path on port %u",
eth_dev->data->port_id);
eth_dev->rx_pkt_burst = virtio_recv_pkts_vec;
+ } else if (hw->use_inorder_rx) {
+ PMD_INIT_LOG(INFO,
+ "virtio: using inorder mergeable buffer Rx path on port %u",
+ eth_dev->data->port_id);
+ eth_dev->rx_pkt_burst = &virtio_recv_mergeable_pkts_inorder;
} else if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
PMD_INIT_LOG(INFO,
"virtio: using mergeable buffer Rx path on port %u",
@@ -1335,6 +1340,10 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
PMD_INIT_LOG(INFO, "virtio: using simple Tx path on port %u",
eth_dev->data->port_id);
eth_dev->tx_pkt_burst = virtio_xmit_pkts_simple;
+ } else if (hw->use_inorder_tx) {
+ PMD_INIT_LOG(INFO, "virtio: using inorder Tx path on port %u",
+ eth_dev->data->port_id);
+ eth_dev->tx_pkt_burst = virtio_xmit_pkts_inorder;
} else {
PMD_INIT_LOG(INFO, "virtio: using standard Tx path on port %u",
eth_dev->data->port_id);
@@ -1871,23 +1880,25 @@ virtio_dev_configure(struct rte_eth_dev *dev)
rte_spinlock_init(&hw->state_lock);
- hw->use_simple_rx = 1;
- hw->use_simple_tx = 1;
-
#if defined RTE_ARCH_ARM64 || defined RTE_ARCH_ARM
if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON)) {
hw->use_simple_rx = 0;
hw->use_simple_tx = 0;
}
#endif
- if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
- hw->use_simple_rx = 0;
- hw->use_simple_tx = 0;
- }
+ if (vtpci_with_feature(hw, VIRTIO_F_IN_ORDER)) {
+ if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
+ hw->use_inorder_rx = 1;
+ hw->use_inorder_tx = 1;
+ } else {
+ hw->use_simple_rx = 1;
+ hw->use_simple_tx = 1;
+ }
- if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
- DEV_RX_OFFLOAD_TCP_CKSUM))
- hw->use_simple_rx = 0;
+ if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))
+ hw->use_inorder_rx = 1;
+ }
return 0;
}