diff mbox

[dpdk-dev] doc: update bonding device name in prog guide

Message ID 1494423532-3525-1-git-send-email-herakliusz.lipiec@intel.com (mailing list archive)
State Accepted, archived
Headers

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Herakliusz Lipiec May 10, 2017, 1:38 p.m. UTC 
  Fixes: 35b09d76f89e ("doc: use corelist instead of coremask")
Fixes: 58c82067f1ae ("app/testpmd: use consistent vdev names")

Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
---
 doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

John McNamara May 10, 2017, 1:51 p.m. UTC | #1 
> -----Original Message-----
> From: stable [mailto:stable-bounces@dpdk.org] On Behalf Of Herakliusz
> Lipiec
> Sent: Wednesday, May 10, 2017 2:39 PM
> To: Doherty, Declan <declan.doherty@intel.com>
> Cc: dev@dpdk.org; stable@dpdk.org
> Subject: [dpdk-stable] [PATCH] doc: update bonding device name in prog
> guide
> 
> Fixes: 35b09d76f89e ("doc: use corelist instead of coremask")
> Fixes: 58c82067f1ae ("app/testpmd: use consistent vdev names")
> 
> Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>


Acked-by: John McNamara <john.mcnamara@intel.com>
Thomas Monjalon May 10, 2017, 8:41 p.m. UTC | #2 
10/05/2017 15:51, Mcnamara, John:
> From: On Behalf Of Herakliusz Lipiec
> > 
> > Fixes: 35b09d76f89e ("doc: use corelist instead of coremask")
> > Fixes: 58c82067f1ae ("app/testpmd: use consistent vdev names")
> > 
> > Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
> 
> Acked-by: John McNamara <john.mcnamara@intel.com>

Applied, thanks
diff mbox

Patch

diff --git a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
index 73fefce..1ef231d 100644
--- a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
+++ b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst
@@ -356,7 +356,7 @@  Using Link Bonding Devices from the EAL Command Line
 
 Link bonding devices can be created at application startup time using the
 ``--vdev`` EAL command line option. The device name must start with the
-net_bond prefix followed by numbers or letters. The name must be unique for
+net_bonding prefix followed by numbers or letters. The name must be unique for
 each device. Each device can have multiple options arranged in a comma
 separated list. Multiple devices definitions can be arranged by calling the
 ``--vdev`` option multiple times.
@@ -365,7 +365,7 @@  Device names and bonding options must be separated by commas as shown below:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,bond_opt0=..,bond opt1=..'--vdev 'net_bond1,bond _opt0=..,bond_opt1=..'
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,bond_opt0=..,bond opt1=..'--vdev 'net_bonding1,bond _opt0=..,bond_opt1=..'
 
 Link Bonding EAL Options
 ^^^^^^^^^^^^^^^^^^^^^^^^
@@ -373,7 +373,7 @@  Link Bonding EAL Options
 There are multiple ways of definitions that can be assessed and combined as
 long as the following two rules are respected:
 
-*   A unique device name, in the format of net_bondX is provided,
+*   A unique device name, in the format of net_bondingX is provided,
     where X can be any combination of numbers and/or letters,
     and the name is no greater than 32 characters long.
 
@@ -465,22 +465,22 @@  Create a bonded device in round robin mode with two slaves specified by their PC
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00' -- --port-topology=chained
 
 Create a bonded device in round robin mode with two slaves specified by their PCI address and an overriding MAC address:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00,mac=00:1e:67:1d:fd:1d' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00,mac=00:1e:67:1d:fd:1d' -- --port-topology=chained
 
 Create a bonded device in active backup mode with two slaves specified, and a primary slave specified by their PCI addresses:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=1, slave=0000:00a:00.01,slave=0000:004:00.00,primary=0000:00a:00.01' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=1, slave=0000:00a:00.01,slave=0000:004:00.00,primary=0000:00a:00.01' -- --port-topology=chained
 
 Create a bonded device in balance mode with two slaves specified by their PCI addresses, and a transmission policy of layer 3 + 4 forwarding:
 
 .. code-block:: console
 
-    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=2, slave=0000:00a:00.01,slave=0000:004:00.00,xmit_policy=l34' -- --port-topology=chained
+    $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=2, slave=0000:00a:00.01,slave=0000:004:00.00,xmit_policy=l34' -- --port-topology=chained