diff mbox

[dpdk-dev,2/2] doc: add QinQ flow information to testpmd

Message ID 1491578092-5823-2-git-send-email-bernard.iremonger@intel.com (mailing list archive)
State Accepted, archived
Delegated to: Ferruh Yigit
Headers

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Iremonger, Bernard April 7, 2017, 3:14 p.m. UTC 
  Add information on validating and creating QinQ flow rules to
the flow rules management section of the Testpmd User Guide.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 41 +++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

Comments

John McNamara April 10, 2017, 7:56 a.m. UTC | #1 
> -----Original Message-----
> From: Iremonger, Bernard
> Sent: Friday, April 7, 2017 4:15 PM
> To: dev@dpdk.org
> Cc: Xing, Beilei <beilei.xing@intel.com>; Lu, Wenzhuo
> <wenzhuo.lu@intel.com>; Mcnamara, John <john.mcnamara@intel.com>;
> Iremonger, Bernard <bernard.iremonger@intel.com>
> Subject: [PATCH 2/2] doc: add QinQ flow information to testpmd
> 
> Add information on validating and creating QinQ flow rules to the flow
> rules management section of the Testpmd User Guide.
> 
> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>

It is good to see an example as well as the command added to the docs.

Acked-by: John McNamara <john.mcnamara@intel.com>
diff mbox

Patch

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 497e2dd70..e9124f324 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -2794,3 +2794,44 @@  Output can be limited to specific groups::
    5       0       1000    i-      ETH IPV6 ICMP => QUEUE
    7       63      0       i-      ETH IPV6 UDP VXLAN => MARK QUEUE
    testpmd>
+
+Sample QinQ flow rules
+~~~~~~~~~~~~~~~~~~~~~~
+
+Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
+
+::
+
+   testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
+       vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+   Flow rule #0 validated
+
+   testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
+       vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+   Flow rule #0 created
+
+   testpmd> flow list 0
+   ID      Group   Prio    Attr    Rule
+   0       0       0       i-      ETH VLAN VLAN=>VF QUEUE
+
+Validate and create a QinQ rule on port 0 to steer traffic to a queue on the host.
+
+::
+
+   testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
+        vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 0 / end
+   Flow rule #1 validated
+
+   testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
+        vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 1 / end
+   Flow rule #1 created
+
+   testpmd> flow list 0
+   ID      Group   Prio    Attr    Rule
+   0       0       0       i-      ETH VLAN VLAN=>VF QUEUE
+   1       0       0       i-      ETH VLAN VLAN=>PF QUEUE
+
+After creating QinQ rule(s) the following command should be issued to enable QinQ::
+
+   testpmd> vlan set qinq on 0
+