[dpdk-dev,v6,5/6] enicpmd: DPDK-ENIC PMD interface

Message ID 1416936405-25333-6-git-send-email-ssujith@cisco.com (mailing list archive)
State Accepted, archived
Headers

Commit Message

Sujith Sankar Nov. 25, 2014, 5:26 p.m. UTC
  Signed-off-by: Sujith Sankar <ssujith@cisco.com>
---
 lib/librte_pmd_enic/enic_etherdev.c | 613 ++++++++++++++++++++++++++++++++++++
 1 file changed, 613 insertions(+)
 create mode 100644 lib/librte_pmd_enic/enic_etherdev.c
  

Comments

Jingjing Wu Dec. 29, 2014, 8:15 a.m. UTC | #1
Hi, ssujith

> +	.tx_queue_release     = enicpmd_dev_tx_queue_release,
> +	.dev_led_on           = NULL,
> +	.dev_led_off          = NULL,
> +	.flow_ctrl_get        = NULL,
> +	.flow_ctrl_set        = NULL,
> +	.priority_flow_ctrl_set = NULL,
> +	.mac_addr_add         = enicpmd_add_mac_addr,
> +	.mac_addr_remove      = enicpmd_remove_mac_addr,
> +	.fdir_add_signature_filter    = NULL,
> +	.fdir_update_signature_filter = NULL,
> +	.fdir_remove_signature_filter = NULL,
> +	.fdir_infos_get               = enicpmd_fdir_info_get,
> +	.fdir_add_perfect_filter      = enicpmd_fdir_add_perfect_filter,
> +	.fdir_update_perfect_filter   = enicpmd_fdir_add_perfect_filter,
> +	.fdir_remove_perfect_filter   = enicpmd_fdir_remove_perfect_filter,
> +	.fdir_set_masks               = NULL,
> +};
> +

I found that in perfect fdir is also supported in enic driver.

During the R1.8 development, we defined a new dev_ops call filter_ctrl, which can be used to control kinds of filters, flow director is included too. Which is mentioned in  http://www.dpdk.org/ml/archives/dev/2014-September/005179.html .
In R1.8, filter_ctrl is only used by i40e driver. And we also planned use it in the existing ixgbe/e1000 driver in the next days. The old APIs such as fdir_add_perfect_filter, fdir_remove_perfect_filter can be replaced then.

So, do you have any plan to migrate the fdir in enic to the filter_ctrl API?

Jingjing

Thanks!

> +struct enic *enicpmd_list_head = NULL;
> +/* Initialize the driver
> + * It returns 0 on success.
> + */
> +static int eth_enicpmd_dev_init(
> +	__attribute__((unused))struct eth_driver *eth_drv,
> +	struct rte_eth_dev *eth_dev)
> +{
> +	struct rte_pci_device *pdev;
> +	struct rte_pci_addr *addr;
> +	struct enic *enic = pmd_priv(eth_dev);
> +
> +	ENICPMD_FUNC_TRACE();
> +
> +	enic->rte_dev = eth_dev;
> +	eth_dev->dev_ops = &enicpmd_eth_dev_ops;
> +	eth_dev->rx_pkt_burst = &enicpmd_recv_pkts;
> +	eth_dev->tx_pkt_burst = &enicpmd_xmit_pkts;
> +
> +	pdev = eth_dev->pci_dev;
> +	enic->pdev = pdev;
> +	addr = &pdev->addr;
> +
> +	snprintf(enic->bdf_name, ENICPMD_BDF_LENGTH,
> "%04x:%02x:%02x.%x",
> +		addr->domain, addr->bus, addr->devid, addr->function);
> +
> +	return enic_probe(enic);
> +}
> +
> +static struct eth_driver rte_enic_pmd = {
> +	{
> +		.name = "rte_enic_pmd",
> +		.id_table = pci_id_enic_map,
> +		.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
> +	},
> +	.eth_dev_init = eth_enicpmd_dev_init,
> +	.dev_private_size = sizeof(struct enic), };
> +
> +/* Driver initialization routine.
> + * Invoked once at EAL init time.
> + * Register as the [Poll Mode] Driver of Cisco ENIC device.
> + */
> +int rte_enic_pmd_init(const char *name __rte_unused,
> +	const char *params __rte_unused)
> +{
> +	ENICPMD_FUNC_TRACE();
> +
> +	rte_eth_driver_register(&rte_enic_pmd);
> +	return 0;
> +}
> +
> +static struct rte_driver rte_enic_driver = {
> +	.type = PMD_PDEV,
> +	.init = rte_enic_pmd_init,
> +};
> +
> +PMD_REGISTER_DRIVER(rte_enic_driver);
> +
> --
> 1.9.1
  
Sujith Sankar Dec. 30, 2014, 4:45 a.m. UTC | #2
On 29/12/14 1:45 pm, "Wu, Jingjing" <jingjing.wu@intel.com> wrote:

>Hi, ssujith
>
>> +	.tx_queue_release     = enicpmd_dev_tx_queue_release,
>> +	.dev_led_on           = NULL,
>> +	.dev_led_off          = NULL,
>> +	.flow_ctrl_get        = NULL,
>> +	.flow_ctrl_set        = NULL,
>> +	.priority_flow_ctrl_set = NULL,
>> +	.mac_addr_add         = enicpmd_add_mac_addr,
>> +	.mac_addr_remove      = enicpmd_remove_mac_addr,
>> +	.fdir_add_signature_filter    = NULL,
>> +	.fdir_update_signature_filter = NULL,
>> +	.fdir_remove_signature_filter = NULL,
>> +	.fdir_infos_get               = enicpmd_fdir_info_get,
>> +	.fdir_add_perfect_filter      = enicpmd_fdir_add_perfect_filter,
>> +	.fdir_update_perfect_filter   = enicpmd_fdir_add_perfect_filter,
>> +	.fdir_remove_perfect_filter   = enicpmd_fdir_remove_perfect_filter,
>> +	.fdir_set_masks               = NULL,
>> +};
>> +
>
>I found that in perfect fdir is also supported in enic driver.
>
>During the R1.8 development, we defined a new dev_ops call filter_ctrl,
>which can be used to control kinds of filters, flow director is included
>too. Which is mentioned in
>http://www.dpdk.org/ml/archives/dev/2014-September/005179.html .
>In R1.8, filter_ctrl is only used by i40e driver. And we also planned use
>it in the existing ixgbe/e1000 driver in the next days. The old APIs such
>as fdir_add_perfect_filter, fdir_remove_perfect_filter can be replaced
>then.


Hi Jingjing,
Thanks for the info and the link.  I shall take a look at it.
It looks like bringing in one interface for all filter related operations.
 I believe ENIC should also move to it.

Thanks,
-Sujith

>
>So, do you have any plan to migrate the fdir in enic to the filter_ctrl
>API?
>
>Jingjing
>
>Thanks!
>
>> +struct enic *enicpmd_list_head = NULL;
>> +/* Initialize the driver
>> + * It returns 0 on success.
>> + */
>> +static int eth_enicpmd_dev_init(
>> +	__attribute__((unused))struct eth_driver *eth_drv,
>> +	struct rte_eth_dev *eth_dev)
>> +{
>> +	struct rte_pci_device *pdev;
>> +	struct rte_pci_addr *addr;
>> +	struct enic *enic = pmd_priv(eth_dev);
>> +
>> +	ENICPMD_FUNC_TRACE();
>> +
>> +	enic->rte_dev = eth_dev;
>> +	eth_dev->dev_ops = &enicpmd_eth_dev_ops;
>> +	eth_dev->rx_pkt_burst = &enicpmd_recv_pkts;
>> +	eth_dev->tx_pkt_burst = &enicpmd_xmit_pkts;
>> +
>> +	pdev = eth_dev->pci_dev;
>> +	enic->pdev = pdev;
>> +	addr = &pdev->addr;
>> +
>> +	snprintf(enic->bdf_name, ENICPMD_BDF_LENGTH,
>> "%04x:%02x:%02x.%x",
>> +		addr->domain, addr->bus, addr->devid, addr->function);
>> +
>> +	return enic_probe(enic);
>> +}
>> +
>> +static struct eth_driver rte_enic_pmd = {
>> +	{
>> +		.name = "rte_enic_pmd",
>> +		.id_table = pci_id_enic_map,
>> +		.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
>> +	},
>> +	.eth_dev_init = eth_enicpmd_dev_init,
>> +	.dev_private_size = sizeof(struct enic), };
>> +
>> +/* Driver initialization routine.
>> + * Invoked once at EAL init time.
>> + * Register as the [Poll Mode] Driver of Cisco ENIC device.
>> + */
>> +int rte_enic_pmd_init(const char *name __rte_unused,
>> +	const char *params __rte_unused)
>> +{
>> +	ENICPMD_FUNC_TRACE();
>> +
>> +	rte_eth_driver_register(&rte_enic_pmd);
>> +	return 0;
>> +}
>> +
>> +static struct rte_driver rte_enic_driver = {
>> +	.type = PMD_PDEV,
>> +	.init = rte_enic_pmd_init,
>> +};
>> +
>> +PMD_REGISTER_DRIVER(rte_enic_driver);
>> +
>> --
>> 1.9.1
>
  
Thomas Monjalon Jan. 6, 2015, 9:41 a.m. UTC | #3
2014-12-30 04:45, Sujith Sankar:
> On 29/12/14 1:45 pm, "Wu, Jingjing" <jingjing.wu@intel.com> wrote:
> >I found that in perfect fdir is also supported in enic driver.
> >
> >During the R1.8 development, we defined a new dev_ops call filter_ctrl,
> >which can be used to control kinds of filters, flow director is included
> >too. Which is mentioned in
> >http://www.dpdk.org/ml/archives/dev/2014-September/005179.html .
> >In R1.8, filter_ctrl is only used by i40e driver. And we also planned use
> >it in the existing ixgbe/e1000 driver in the next days. The old APIs such
> >as fdir_add_perfect_filter, fdir_remove_perfect_filter can be replaced
> >then.
> 
> Hi Jingjing,
> Thanks for the info and the link.  I shall take a look at it.
> It looks like bringing in one interface for all filter related operations.
>  I believe ENIC should also move to it.

Yes please.
It is planned to remove or deprecate old flow director API.
  
Jingjing Wu Jan. 30, 2015, 8:53 a.m. UTC | #4
Hi, ssujith

> -----Original Message-----
> From: Sujith Sankar (ssujith) [mailto:ssujith@cisco.com]
> Sent: Tuesday, December 30, 2014 12:46 PM
> To: Wu, Jingjing; dev@dpdk.org
> Cc: Prasad Rao (prrao)
> Subject: Re: [dpdk-dev] [PATCH v6 5/6] enicpmd: DPDK-ENIC PMD interface
> 
> 
> 
> On 29/12/14 1:45 pm, "Wu, Jingjing" <jingjing.wu@intel.com> wrote:
> 
> >Hi, ssujith
> >
> >> +	.tx_queue_release     = enicpmd_dev_tx_queue_release,
> >> +	.dev_led_on           = NULL,
> >> +	.dev_led_off          = NULL,
> >> +	.flow_ctrl_get        = NULL,
> >> +	.flow_ctrl_set        = NULL,
> >> +	.priority_flow_ctrl_set = NULL,
> >> +	.mac_addr_add         = enicpmd_add_mac_addr,
> >> +	.mac_addr_remove      = enicpmd_remove_mac_addr,
> >> +	.fdir_add_signature_filter    = NULL,
> >> +	.fdir_update_signature_filter = NULL,
> >> +	.fdir_remove_signature_filter = NULL,
> >> +	.fdir_infos_get               = enicpmd_fdir_info_get,
> >> +	.fdir_add_perfect_filter      = enicpmd_fdir_add_perfect_filter,
> >> +	.fdir_update_perfect_filter   = enicpmd_fdir_add_perfect_filter,
> >> +	.fdir_remove_perfect_filter   = enicpmd_fdir_remove_perfect_filter,
> >> +	.fdir_set_masks               = NULL,
> >> +};
> >> +
> >
> >I found that in perfect fdir is also supported in enic driver.
> >
> >During the R1.8 development, we defined a new dev_ops call filter_ctrl,
> >which can be used to control kinds of filters, flow director is
> >included too. Which is mentioned in
> >http://www.dpdk.org/ml/archives/dev/2014-September/005179.html .
> >In R1.8, filter_ctrl is only used by i40e driver. And we also planned
> >use it in the existing ixgbe/e1000 driver in the next days. The old
> >APIs such as fdir_add_perfect_filter, fdir_remove_perfect_filter can be
> >replaced then.
> 
> 
> Hi Jingjing,
> Thanks for the info and the link.  I shall take a look at it.
> It looks like bringing in one interface for all filter related operations.
>  I believe ENIC should also move to it.
> 
> Thanks,
> -Sujith
> 

Just let you know that, I already sent the patch to migrate the flow director in ixgbe driver to new filter_ctrl API.
http://www.dpdk.org/ml/archives/dev/2015-January/011830.html 
To avoid compile error and influence to enic driver. I didn't remove the old APIs and structures in rte_ethdev. I think they can be removed when the migration in enic driver is done. Do you have any plan for this?

Thank u!
Jingjing

> >
> >So, do you have any plan to migrate the fdir in enic to the filter_ctrl
> >API?
> >
> >Jingjing
> >
> >Thanks!
> >
> >> +struct enic *enicpmd_list_head = NULL;
> >> +/* Initialize the driver
> >> + * It returns 0 on success.
> >> + */
> >> +static int eth_enicpmd_dev_init(
> >> +	__attribute__((unused))struct eth_driver *eth_drv,
> >> +	struct rte_eth_dev *eth_dev)
> >> +{
> >> +	struct rte_pci_device *pdev;
> >> +	struct rte_pci_addr *addr;
> >> +	struct enic *enic = pmd_priv(eth_dev);
> >> +
> >> +	ENICPMD_FUNC_TRACE();
> >> +
> >> +	enic->rte_dev = eth_dev;
> >> +	eth_dev->dev_ops = &enicpmd_eth_dev_ops;
> >> +	eth_dev->rx_pkt_burst = &enicpmd_recv_pkts;
> >> +	eth_dev->tx_pkt_burst = &enicpmd_xmit_pkts;
> >> +
> >> +	pdev = eth_dev->pci_dev;
> >> +	enic->pdev = pdev;
> >> +	addr = &pdev->addr;
> >> +
> >> +	snprintf(enic->bdf_name, ENICPMD_BDF_LENGTH,
> >> "%04x:%02x:%02x.%x",
> >> +		addr->domain, addr->bus, addr->devid, addr->function);
> >> +
> >> +	return enic_probe(enic);
> >> +}
> >> +
> >> +static struct eth_driver rte_enic_pmd = {
> >> +	{
> >> +		.name = "rte_enic_pmd",
> >> +		.id_table = pci_id_enic_map,
> >> +		.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
> >> +	},
> >> +	.eth_dev_init = eth_enicpmd_dev_init,
> >> +	.dev_private_size = sizeof(struct enic), };
> >> +
> >> +/* Driver initialization routine.
> >> + * Invoked once at EAL init time.
> >> + * Register as the [Poll Mode] Driver of Cisco ENIC device.
> >> + */
> >> +int rte_enic_pmd_init(const char *name __rte_unused,
> >> +	const char *params __rte_unused)
> >> +{
> >> +	ENICPMD_FUNC_TRACE();
> >> +
> >> +	rte_eth_driver_register(&rte_enic_pmd);
> >> +	return 0;
> >> +}
> >> +
> >> +static struct rte_driver rte_enic_driver = {
> >> +	.type = PMD_PDEV,
> >> +	.init = rte_enic_pmd_init,
> >> +};
> >> +
> >> +PMD_REGISTER_DRIVER(rte_enic_driver);
> >> +
> >> --
> >> 1.9.1
> >
  

Patch

diff --git a/lib/librte_pmd_enic/enic_etherdev.c b/lib/librte_pmd_enic/enic_etherdev.c
new file mode 100644
index 0000000..d0577aa
--- /dev/null
+++ b/lib/librte_pmd_enic/enic_etherdev.c
@@ -0,0 +1,613 @@ 
+/*
+ * Copyright 2008-2014 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ *
+ * Copyright (c) 2014, Cisco Systems, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ident "$Id$"
+
+#include <stdio.h>
+#include <stdint.h>
+
+#include <rte_dev.h>
+#include <rte_pci.h>
+#include <rte_ethdev.h>
+#include <rte_string_fns.h>
+
+#include "vnic_intr.h"
+#include "vnic_cq.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "vnic_enet.h"
+#include "enic.h"
+
+#define ENICPMD_FUNC_TRACE() \
+	RTE_LOG(DEBUG, PMD, "ENICPMD trace: %s\n", __func__)
+
+/*
+ * The set of PCI devices this driver supports
+ */
+static struct rte_pci_id pci_id_enic_map[] = {
+#define RTE_PCI_DEV_ID_DECL_ENIC(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
+#ifndef PCI_VENDOR_ID_CISCO
+#define PCI_VENDOR_ID_CISCO	0x1137
+#endif
+#include "rte_pci_dev_ids.h"
+RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET)
+RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET_VF)
+{.vendor_id = 0, /* Sentinal */},
+};
+
+static int enicpmd_fdir_remove_perfect_filter(struct rte_eth_dev *eth_dev,
+		struct rte_fdir_filter *fdir_filter,
+		uint16_t soft_id)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	return enic_fdir_del_fltr(enic, fdir_filter);
+}
+
+static int enicpmd_fdir_add_perfect_filter(struct rte_eth_dev *eth_dev,
+	struct rte_fdir_filter *fdir_filter, uint16_t soft_id,
+	uint8_t queue, uint8_t drop)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	return enic_fdir_add_fltr(enic, fdir_filter, (uint16_t)queue, drop);
+}
+
+static void enicpmd_fdir_info_get(struct rte_eth_dev *eth_dev,
+	struct rte_eth_fdir *fdir)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	*fdir = enic->fdir.stats;
+}
+
+static void enicpmd_dev_tx_queue_release(void *txq)
+{
+	ENICPMD_FUNC_TRACE();
+	enic_free_wq(txq);
+}
+
+static int enicpmd_dev_setup_intr(struct enic *enic)
+{
+	int ret;
+	int index;
+
+	ENICPMD_FUNC_TRACE();
+
+	/* Are we done with the init of all the queues? */
+	for (index = 0; index < enic->cq_count; index++) {
+		if (!enic->cq[index].ctrl)
+			break;
+	}
+
+	if (enic->cq_count != index)
+		return 0;
+
+	ret = enic_alloc_intr_resources(enic);
+	if (ret) {
+		dev_err(enic, "alloc intr failed\n");
+		return ret;
+	}
+	enic_init_vnic_resources(enic);
+
+	ret = enic_setup_finish(enic);
+	if (ret)
+		dev_err(enic, "setup could not be finished\n");
+
+	return ret;
+}
+
+static int enicpmd_dev_tx_queue_setup(struct rte_eth_dev *eth_dev,
+	uint16_t queue_idx,
+	uint16_t nb_desc,
+	unsigned int socket_id,
+	const struct rte_eth_txconf *tx_conf)
+{
+	int ret;
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	eth_dev->data->tx_queues[queue_idx] = (void *)&enic->wq[queue_idx];
+
+	ret = enic_alloc_wq(enic, queue_idx, socket_id, nb_desc);
+	if (ret) {
+		dev_err(enic, "error in allocating wq\n");
+		return ret;
+	}
+
+	return enicpmd_dev_setup_intr(enic);
+}
+
+static int enicpmd_dev_tx_queue_start(struct rte_eth_dev *eth_dev,
+	uint16_t queue_idx)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+
+	enic_start_wq(enic, queue_idx);
+
+	return 0;
+}
+
+static int enicpmd_dev_tx_queue_stop(struct rte_eth_dev *eth_dev,
+	uint16_t queue_idx)
+{
+	int ret;
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+
+	ret = enic_stop_wq(enic, queue_idx);
+	if (ret)
+		dev_err(enic, "error in stopping wq %d\n", queue_idx);
+
+	return ret;
+}
+
+static int enicpmd_dev_rx_queue_start(struct rte_eth_dev *eth_dev,
+	uint16_t queue_idx)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+
+	enic_start_rq(enic, queue_idx);
+
+	return 0;
+}
+
+static int enicpmd_dev_rx_queue_stop(struct rte_eth_dev *eth_dev,
+	uint16_t queue_idx)
+{
+	int ret;
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+
+	ret = enic_stop_rq(enic, queue_idx);
+	if (ret)
+		dev_err(enic, "error in stopping rq %d\n", queue_idx);
+
+	return ret;
+}
+
+static void enicpmd_dev_rx_queue_release(void *rxq)
+{
+	ENICPMD_FUNC_TRACE();
+	enic_free_rq(rxq);
+}
+
+static int enicpmd_dev_rx_queue_setup(struct rte_eth_dev *eth_dev,
+	uint16_t queue_idx,
+	uint16_t nb_desc,
+	unsigned int socket_id,
+	const struct rte_eth_rxconf *rx_conf,
+	struct rte_mempool *mp)
+{
+	int ret;
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	eth_dev->data->rx_queues[queue_idx] = (void *)&enic->rq[queue_idx];
+
+	ret = enic_alloc_rq(enic, queue_idx, socket_id, mp, nb_desc);
+	if (ret) {
+		dev_err(enic, "error in allocating rq\n");
+		return ret;
+	}
+
+	return enicpmd_dev_setup_intr(enic);
+}
+
+static int enicpmd_vlan_filter_set(struct rte_eth_dev *eth_dev,
+	uint16_t vlan_id, int on)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	if (on)
+		enic_add_vlan(enic, vlan_id);
+	else
+		enic_del_vlan(enic, vlan_id);
+	return 0;
+}
+
+static void enicpmd_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+
+	if (mask & ETH_VLAN_STRIP_MASK) {
+		if (eth_dev->data->dev_conf.rxmode.hw_vlan_strip)
+			enic->ig_vlan_strip_en = 1;
+		else
+			enic->ig_vlan_strip_en = 0;
+	}
+	enic_set_rss_nic_cfg(enic);
+
+
+	if (mask & ETH_VLAN_FILTER_MASK) {
+		dev_warning(enic,
+			"Configuration of VLAN filter is not supported\n");
+	}
+
+	if (mask & ETH_VLAN_EXTEND_MASK) {
+		dev_warning(enic,
+			"Configuration of extended VLAN is not supported\n");
+	}
+}
+
+static int enicpmd_dev_configure(struct rte_eth_dev *eth_dev)
+{
+	int ret;
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	ret = enic_set_vnic_res(enic);
+	if (ret) {
+		dev_err(enic, "Set vNIC resource num  failed, aborting\n");
+		return ret;
+	}
+
+	if (eth_dev->data->dev_conf.rxmode.split_hdr_size &&
+		eth_dev->data->dev_conf.rxmode.header_split) {
+		/* Enable header-data-split */
+		enic_set_hdr_split_size(enic,
+			eth_dev->data->dev_conf.rxmode.split_hdr_size);
+	}
+
+	enic->hw_ip_checksum = eth_dev->data->dev_conf.rxmode.hw_ip_checksum;
+	return 0;
+}
+
+/* Start the device.
+ * It returns 0 on success.
+ */
+static int enicpmd_dev_start(struct rte_eth_dev *eth_dev)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	return enic_enable(enic);
+}
+
+/*
+ * Stop device: disable rx and tx functions to allow for reconfiguring.
+ */
+static void enicpmd_dev_stop(struct rte_eth_dev *eth_dev)
+{
+	struct rte_eth_link link;
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic_disable(enic);
+	memset(&link, 0, sizeof(link));
+	rte_atomic64_cmpset((uint64_t *)&eth_dev->data->dev_link,
+		*(uint64_t *)&eth_dev->data->dev_link,
+		*(uint64_t *)&link);
+}
+
+/*
+ * Stop device.
+ */
+static void enicpmd_dev_close(struct rte_eth_dev *eth_dev)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic_remove(enic);
+}
+
+static int enicpmd_dev_link_update(struct rte_eth_dev *eth_dev,
+	int wait_to_complete)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+	int ret;
+	int link_status = 0;
+
+	ENICPMD_FUNC_TRACE();
+	link_status = enic_get_link_status(enic);
+	ret = (link_status == enic->link_status);
+	enic->link_status = link_status;
+	eth_dev->data->dev_link.link_status = link_status;
+	eth_dev->data->dev_link.link_duplex = ETH_LINK_FULL_DUPLEX;
+	eth_dev->data->dev_link.link_speed = vnic_dev_port_speed(enic->vdev);
+	return ret;
+}
+
+static void enicpmd_dev_stats_get(struct rte_eth_dev *eth_dev,
+	struct rte_eth_stats *stats)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic_dev_stats_get(enic, stats);
+}
+
+static void enicpmd_dev_stats_reset(struct rte_eth_dev *eth_dev)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic_dev_stats_clear(enic);
+}
+
+static void enicpmd_dev_info_get(struct rte_eth_dev *eth_dev,
+	struct rte_eth_dev_info *device_info)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	device_info->max_rx_queues = enic->rq_count;
+	device_info->max_tx_queues = enic->wq_count;
+	device_info->min_rx_bufsize = ENIC_MIN_MTU;
+	device_info->max_rx_pktlen = enic->config.mtu;
+	device_info->max_mac_addrs = 1;
+	device_info->rx_offload_capa =
+		DEV_RX_OFFLOAD_VLAN_STRIP |
+		DEV_RX_OFFLOAD_IPV4_CKSUM |
+		DEV_RX_OFFLOAD_UDP_CKSUM  |
+		DEV_RX_OFFLOAD_TCP_CKSUM;
+	device_info->tx_offload_capa =
+		DEV_TX_OFFLOAD_VLAN_INSERT |
+		DEV_TX_OFFLOAD_IPV4_CKSUM  |
+		DEV_TX_OFFLOAD_UDP_CKSUM   |
+		DEV_TX_OFFLOAD_TCP_CKSUM;
+}
+
+static void enicpmd_dev_promiscuous_enable(struct rte_eth_dev *eth_dev)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic->promisc = 1;
+	enic_add_packet_filter(enic);
+}
+
+static void enicpmd_dev_promiscuous_disable(struct rte_eth_dev *eth_dev)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic->promisc = 0;
+	enic_add_packet_filter(enic);
+}
+
+static void enicpmd_dev_allmulticast_enable(struct rte_eth_dev *eth_dev)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic->allmulti = 1;
+	enic_add_packet_filter(enic);
+}
+
+static void enicpmd_dev_allmulticast_disable(struct rte_eth_dev *eth_dev)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic->allmulti = 0;
+	enic_add_packet_filter(enic);
+}
+
+static void enicpmd_add_mac_addr(struct rte_eth_dev *eth_dev,
+	struct ether_addr *mac_addr,
+	uint32_t index, uint32_t pool)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic_set_mac_address(enic, mac_addr->addr_bytes);
+}
+
+static void enicpmd_remove_mac_addr(struct rte_eth_dev *eth_dev, uint32_t index)
+{
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+	enic_del_mac_address(enic);
+}
+
+
+static uint16_t enicpmd_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+	uint16_t nb_pkts)
+{
+	unsigned int index;
+	unsigned int frags;
+	unsigned int pkt_len;
+	unsigned int seg_len;
+	unsigned int inc_len;
+	unsigned int nb_segs;
+	struct rte_mbuf *tx_pkt;
+	struct vnic_wq *wq = (struct vnic_wq *)tx_queue;
+	struct enic *enic = vnic_dev_priv(wq->vdev);
+	unsigned char *buf;
+	unsigned short vlan_id;
+	unsigned short ol_flags;
+
+	for (index = 0; index < nb_pkts; index++) {
+		tx_pkt = *tx_pkts++;
+		inc_len = 0;
+		nb_segs = tx_pkt->nb_segs;
+		if (nb_segs > vnic_wq_desc_avail(wq)) {
+			/* wq cleanup and try again */
+			if (!enic_cleanup_wq(enic, wq) ||
+				(nb_segs > vnic_wq_desc_avail(wq)))
+				return index;
+		}
+		pkt_len = tx_pkt->pkt_len;
+		vlan_id = tx_pkt->vlan_tci;
+		ol_flags = tx_pkt->ol_flags;
+		for (frags = 0; inc_len < pkt_len; frags++) {
+			if (!tx_pkt)
+				break;
+			seg_len = tx_pkt->data_len;
+			inc_len += seg_len;
+			if (enic_send_pkt(enic, wq, tx_pkt,
+				    (unsigned short)seg_len, !frags,
+				    (pkt_len == inc_len), ol_flags, vlan_id)) {
+				break;
+			}
+			tx_pkt = tx_pkt->next;
+		}
+	}
+
+	enic_cleanup_wq(enic, wq);
+	return index;
+}
+
+static uint16_t enicpmd_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
+	uint16_t nb_pkts)
+{
+	struct vnic_rq *rq = (struct vnic_rq *)rx_queue;
+	unsigned int work_done;
+
+	if (enic_poll(rq, rx_pkts, (unsigned int)nb_pkts, &work_done))
+		dev_err(enic, "error in enicpmd poll\n");
+
+	return work_done;
+}
+
+static struct eth_dev_ops enicpmd_eth_dev_ops = {
+	.dev_configure        = enicpmd_dev_configure,
+	.dev_start            = enicpmd_dev_start,
+	.dev_stop             = enicpmd_dev_stop,
+	.dev_set_link_up      = NULL,
+	.dev_set_link_down    = NULL,
+	.dev_close            = enicpmd_dev_close,
+	.promiscuous_enable   = enicpmd_dev_promiscuous_enable,
+	.promiscuous_disable  = enicpmd_dev_promiscuous_disable,
+	.allmulticast_enable  = enicpmd_dev_allmulticast_enable,
+	.allmulticast_disable = enicpmd_dev_allmulticast_disable,
+	.link_update          = enicpmd_dev_link_update,
+	.stats_get            = enicpmd_dev_stats_get,
+	.stats_reset          = enicpmd_dev_stats_reset,
+	.queue_stats_mapping_set = NULL,
+	.dev_infos_get        = enicpmd_dev_info_get,
+	.mtu_set              = NULL,
+	.vlan_filter_set      = enicpmd_vlan_filter_set,
+	.vlan_tpid_set        = NULL,
+	.vlan_offload_set     = enicpmd_vlan_offload_set,
+	.vlan_strip_queue_set = NULL,
+	.rx_queue_start       = enicpmd_dev_rx_queue_start,
+	.rx_queue_stop        = enicpmd_dev_rx_queue_stop,
+	.tx_queue_start       = enicpmd_dev_tx_queue_start,
+	.tx_queue_stop        = enicpmd_dev_tx_queue_stop,
+	.rx_queue_setup       = enicpmd_dev_rx_queue_setup,
+	.rx_queue_release     = enicpmd_dev_rx_queue_release,
+	.rx_queue_count       = NULL,
+	.rx_descriptor_done   = NULL,
+	.tx_queue_setup       = enicpmd_dev_tx_queue_setup,
+	.tx_queue_release     = enicpmd_dev_tx_queue_release,
+	.dev_led_on           = NULL,
+	.dev_led_off          = NULL,
+	.flow_ctrl_get        = NULL,
+	.flow_ctrl_set        = NULL,
+	.priority_flow_ctrl_set = NULL,
+	.mac_addr_add         = enicpmd_add_mac_addr,
+	.mac_addr_remove      = enicpmd_remove_mac_addr,
+	.fdir_add_signature_filter    = NULL,
+	.fdir_update_signature_filter = NULL,
+	.fdir_remove_signature_filter = NULL,
+	.fdir_infos_get               = enicpmd_fdir_info_get,
+	.fdir_add_perfect_filter      = enicpmd_fdir_add_perfect_filter,
+	.fdir_update_perfect_filter   = enicpmd_fdir_add_perfect_filter,
+	.fdir_remove_perfect_filter   = enicpmd_fdir_remove_perfect_filter,
+	.fdir_set_masks               = NULL,
+};
+
+struct enic *enicpmd_list_head = NULL;
+/* Initialize the driver
+ * It returns 0 on success.
+ */
+static int eth_enicpmd_dev_init(
+	__attribute__((unused))struct eth_driver *eth_drv,
+	struct rte_eth_dev *eth_dev)
+{
+	struct rte_pci_device *pdev;
+	struct rte_pci_addr *addr;
+	struct enic *enic = pmd_priv(eth_dev);
+
+	ENICPMD_FUNC_TRACE();
+
+	enic->rte_dev = eth_dev;
+	eth_dev->dev_ops = &enicpmd_eth_dev_ops;
+	eth_dev->rx_pkt_burst = &enicpmd_recv_pkts;
+	eth_dev->tx_pkt_burst = &enicpmd_xmit_pkts;
+
+	pdev = eth_dev->pci_dev;
+	enic->pdev = pdev;
+	addr = &pdev->addr;
+
+	snprintf(enic->bdf_name, ENICPMD_BDF_LENGTH, "%04x:%02x:%02x.%x",
+		addr->domain, addr->bus, addr->devid, addr->function);
+
+	return enic_probe(enic);
+}
+
+static struct eth_driver rte_enic_pmd = {
+	{
+		.name = "rte_enic_pmd",
+		.id_table = pci_id_enic_map,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+	},
+	.eth_dev_init = eth_enicpmd_dev_init,
+	.dev_private_size = sizeof(struct enic),
+};
+
+/* Driver initialization routine.
+ * Invoked once at EAL init time.
+ * Register as the [Poll Mode] Driver of Cisco ENIC device.
+ */
+int rte_enic_pmd_init(const char *name __rte_unused,
+	const char *params __rte_unused)
+{
+	ENICPMD_FUNC_TRACE();
+
+	rte_eth_driver_register(&rte_enic_pmd);
+	return 0;
+}
+
+static struct rte_driver rte_enic_driver = {
+	.type = PMD_PDEV,
+	.init = rte_enic_pmd_init,
+};
+
+PMD_REGISTER_DRIVER(rte_enic_driver);
+