@@ -342,7 +342,7 @@ vhost_cuse_driver_register(struct vhost_driver *drv)
cuse_info.dev_info_argv = device_argv;
cuse_info.flags = CUSE_UNRESTRICTED_IOCTL;
- ops = get_virtio_net_callbacks();
+ ops = get_virtio_net_callbacks(drv->type);
drv->session = cuse_lowlevel_setup(3, fuse_argv,
&cuse_info, &vhost_net_ops, 0, NULL);
@@ -109,5 +109,6 @@ struct vhost_net_device_ops {
};
-struct vhost_net_device_ops const *get_virtio_net_callbacks(void);
+struct vhost_net_device_ops const *get_virtio_net_callbacks(
+ vhost_driver_type_t type);
#endif /* _VHOST_NET_CDEV_H_ */
new file mode 100644
@@ -0,0 +1,492 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 IGEL Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of IGEL nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dirent.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+#include <rte_virtio_net.h>
+
+#include "vhost-net.h"
+#include "eventfd_link/eventfd_link.h"
+
+const char eventfd_cdev[] = "/dev/eventfd-link";
+
+/* Line size for reading maps file. */
+const uint32_t BUFSIZE = PATH_MAX;
+
+/* Size of prot char array in procmap. */
+#define PROT_SZ 5
+
+/* Number of elements in procmap struct. */
+#define PROCMAP_SZ 8
+
+/* Structure containing information gathered from maps file. */
+struct procmap {
+ uint64_t va_start; /* Start virtual address in file. */
+ uint64_t va_end; /* End virtual address in file. */
+ uint64_t len; /* Size of file. */
+ uint64_t pgoff; /* Not used. */
+ uint32_t maj; /* Not used. */
+ uint32_t min; /* Not used. */
+ uint32_t ino; /* Not used. */
+ char prot[PROT_SZ]; /* Not used. */
+ char fname[PATH_MAX];/* File name. */
+};
+
+/*
+ * Locate the file containing QEMU's memory space and map it to our address space.
+ */
+static int
+host_memory_map(struct virtio_net *dev, struct virtio_memory *mem,
+ pid_t pid, uint64_t addr)
+{
+ struct dirent *dptr = NULL;
+ struct procmap procmap;
+ DIR *dp = NULL;
+ int fd;
+ int i;
+ char memfile[PATH_MAX];
+ char mapfile[PATH_MAX];
+ char procdir[PATH_MAX];
+ char resolved_path[PATH_MAX];
+ char *path = NULL;
+ FILE *fmap;
+ void *map;
+ uint8_t found = 0;
+ char line[BUFSIZE];
+ char dlm[] = "- : ";
+ char *str, *sp, *in[PROCMAP_SZ];
+ char *end = NULL;
+
+ /* Path where mem files are located. */
+ snprintf(procdir, PATH_MAX, "/proc/%u/fd/", pid);
+ /* Maps file used to locate mem file. */
+ snprintf(mapfile, PATH_MAX, "/proc/%u/maps", pid);
+
+ fmap = fopen(mapfile, "r");
+ if (fmap == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to open maps file for pid %d\n",
+ dev->device_fh, pid);
+ return -1;
+ }
+
+ /* Read through maps file until we find out base_address. */
+ while (fgets(line, BUFSIZE, fmap) != 0) {
+ str = line;
+ errno = 0;
+ /* Split line in to fields. */
+ for (i = 0; i < PROCMAP_SZ; i++) {
+ in[i] = strtok_r(str, &dlm[i], &sp);
+ if ((in[i] == NULL) || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+ str = NULL;
+ }
+
+ /* Convert/Copy each field as needed. */
+ procmap.va_start = strtoull(in[0], &end, 16);
+ if ((in[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.va_end = strtoull(in[1], &end, 16);
+ if ((in[1] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.pgoff = strtoull(in[3], &end, 16);
+ if ((in[3] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.maj = strtoul(in[4], &end, 16);
+ if ((in[4] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.min = strtoul(in[5], &end, 16);
+ if ((in[5] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.ino = strtoul(in[6], &end, 16);
+ if ((in[6] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ memcpy(&procmap.prot, in[2], PROT_SZ);
+ memcpy(&procmap.fname, in[7], PATH_MAX);
+
+ if ((procmap.va_start <= addr) && (procmap.va_end >= addr)) {
+ procmap.len = procmap.va_end - procmap.va_start;
+ found = 1;
+ break;
+ }
+ }
+ fclose(fmap);
+
+ if (!found) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find memory file in pid %d maps file\n", dev->device_fh, pid);
+ return -1;
+ }
+
+ /* Find the guest memory file among the process fds. */
+ dp = opendir(procdir);
+ if (dp == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Cannot open pid %d process directory\n", dev->device_fh, pid);
+ return -1;
+
+ }
+
+ found = 0;
+
+ /* Read the fd directory contents. */
+ while (NULL != (dptr = readdir(dp))) {
+ snprintf(memfile, PATH_MAX, "/proc/%u/fd/%s",
+ pid, dptr->d_name);
+ path = realpath(memfile, resolved_path);
+ if (path == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to resolve fd directory\n",
+ dev->device_fh);
+ closedir(dp);
+ return -1;
+ }
+ if (strncmp(resolved_path, procmap.fname,
+ strnlen(procmap.fname, PATH_MAX)) == 0) {
+ found = 1;
+ break;
+ }
+ }
+
+ closedir(dp);
+
+ if (found == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find memory file for pid %d\n", dev->device_fh, pid);
+ return -1;
+ }
+ /* Open the shared memory file and map the memory into this process. */
+ fd = open(memfile, O_RDWR);
+
+ if (fd == -1) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to open %s for pid %d\n", dev->device_fh, memfile, pid);
+ return -1;
+ }
+
+ map = mmap(0, (size_t)procmap.len, PROT_READ|PROT_WRITE ,
+ MAP_POPULATE|MAP_SHARED, fd, 0);
+ close(fd);
+
+ if (map == MAP_FAILED) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Error mapping the file %s for pid %d\n", dev->device_fh, memfile, pid);
+ return -1;
+ }
+
+ /* Store the memory address and size in the device data structure */
+ mem->mapped_address = (uint64_t)(uintptr_t)map;
+ mem->mapped_size = procmap.len;
+
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Mem File: %s->%s - Size: %llu - VA: %p\n", dev->device_fh,
+ memfile, resolved_path, (long long unsigned)mem->mapped_size, map);
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_MEM_TABLE
+ * This function creates and populates the memory structure for the device. This includes
+ * storing offsets used to translate buffer addresses.
+ */
+static int
+cuse_set_mem_table(struct vhost_device_ctx ctx, const void *mem_regions_addr,
+ uint32_t nregions)
+{
+ struct virtio_net *dev;
+ struct vhost_memory_region *mem_regions;
+ struct virtio_memory *mem;
+ uint64_t size = offsetof(struct vhost_memory, regions);
+ uint32_t regionidx, valid_regions;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ if (dev->mem) {
+ munmap((void *)(uintptr_t)dev->mem->mapped_address,
+ (size_t)dev->mem->mapped_size);
+ free(dev->mem);
+ }
+
+ /* Malloc the memory structure depending on the number of regions. */
+ mem = calloc(1, sizeof(struct virtio_memory) +
+ (sizeof(struct virtio_memory_regions) * nregions));
+ if (mem == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for dev->mem.\n", dev->device_fh);
+ return -1;
+ }
+
+ mem->nregions = nregions;
+
+ mem_regions = (void *)(uintptr_t)
+ ((uint64_t)(uintptr_t)mem_regions_addr + size);
+
+ for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
+ /* Populate the region structure for each region. */
+ mem->regions[regionidx].guest_phys_address =
+ mem_regions[regionidx].guest_phys_addr;
+ mem->regions[regionidx].guest_phys_address_end =
+ mem->regions[regionidx].guest_phys_address +
+ mem_regions[regionidx].memory_size;
+ mem->regions[regionidx].memory_size =
+ mem_regions[regionidx].memory_size;
+ mem->regions[regionidx].userspace_address =
+ mem_regions[regionidx].userspace_addr;
+
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") REGION: %u - GPA: %p - QEMU VA: %p - SIZE (%"PRIu64")\n", dev->device_fh,
+ regionidx, (void *)(uintptr_t)mem->regions[regionidx].guest_phys_address,
+ (void *)(uintptr_t)mem->regions[regionidx].userspace_address,
+ mem->regions[regionidx].memory_size);
+
+ /*set the base address mapping*/
+ if (mem->regions[regionidx].guest_phys_address == 0x0) {
+ mem->base_address = mem->regions[regionidx].userspace_address;
+ /* Map VM memory file */
+ if (host_memory_map(dev, mem, ctx.pid, mem->base_address) != 0) {
+ free(mem);
+ return -1;
+ }
+ }
+ }
+
+ /* Check that we have a valid base address. */
+ if (mem->base_address == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find base address of qemu memory file.\n", dev->device_fh);
+ free(mem);
+ return -1;
+ }
+
+ /* Check if all of our regions have valid mappings. Usually one does not exist in the QEMU memory file. */
+ valid_regions = mem->nregions;
+ for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
+ if ((mem->regions[regionidx].userspace_address < mem->base_address) ||
+ (mem->regions[regionidx].userspace_address > (mem->base_address + mem->mapped_size)))
+ valid_regions--;
+ }
+
+ /* If a region does not have a valid mapping we rebuild our memory struct to contain only valid entries. */
+ if (valid_regions != mem->nregions) {
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Not all memory regions exist in the QEMU mem file. Re-populating mem structure\n",
+ dev->device_fh);
+
+ /* Re-populate the memory structure with only valid regions. Invalid regions are over-written with memmove. */
+ valid_regions = 0;
+
+ for (regionidx = mem->nregions; 0 != regionidx--;) {
+ if ((mem->regions[regionidx].userspace_address < mem->base_address) ||
+ (mem->regions[regionidx].userspace_address > (mem->base_address + mem->mapped_size))) {
+ memmove(&mem->regions[regionidx], &mem->regions[regionidx + 1],
+ sizeof(struct virtio_memory_regions) * valid_regions);
+ } else {
+ valid_regions++;
+ }
+ }
+ }
+ mem->nregions = valid_regions;
+ dev->mem = mem;
+
+ /*
+ * Calculate the address offset for each region. This offset is used to identify the vhost virtual address
+ * corresponding to a QEMU guest physical address.
+ */
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
+ dev->mem->regions[regionidx].address_offset = dev->mem->regions[regionidx].userspace_address - dev->mem->base_address
+ + dev->mem->mapped_address - dev->mem->regions[regionidx].guest_phys_address;
+
+ }
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_GET_VRING_BASE
+ * We send the virtio device our available ring last used index.
+ */
+static int
+cuse_get_vring_base(struct vhost_device_ctx ctx, uint32_t index,
+ struct vhost_vring_state *state)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ state->index = index;
+ /* State->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ state->num = dev->virtqueue[state->index]->last_used_idx;
+
+ return 0;
+}
+
+/*
+ * This function uses the eventfd_link kernel module to copy an eventfd file descriptor
+ * provided by QEMU in to our process space.
+ */
+static int
+eventfd_copy(struct virtio_net *dev, struct eventfd_copy *eventfd_copy)
+{
+ int eventfd_link, ret;
+
+ /* Open the character device to the kernel module. */
+ eventfd_link = open(eventfd_cdev, O_RDWR);
+ if (eventfd_link < 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") eventfd_link module is not loaded\n", dev->device_fh);
+ return -1;
+ }
+
+ /* Call the IOCTL to copy the eventfd. */
+ ret = ioctl(eventfd_link, EVENTFD_COPY, eventfd_copy);
+ close(eventfd_link);
+
+ if (ret < 0) {
+ RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") EVENTFD_COPY ioctl failed\n", dev->device_fh);
+ return -1;
+ }
+
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_VRING_CALL
+ * The virtio device sends an eventfd to interrupt the guest. This fd gets copied in
+ * to our process space.
+ */
+static int
+cuse_set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
+{
+ struct virtio_net *dev;
+ struct eventfd_copy eventfd_kick;
+ struct vhost_virtqueue *vq;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ vq = dev->virtqueue[file->index];
+
+ if (vq->kickfd)
+ close((int)vq->kickfd);
+
+ /* Populate the eventfd_copy structure and call eventfd_copy. */
+ vq->kickfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
+ eventfd_kick.source_fd = vq->kickfd;
+ eventfd_kick.target_fd = file->fd;
+ eventfd_kick.target_pid = ctx.pid;
+
+ if (eventfd_copy(dev, &eventfd_kick))
+ return -1;
+
+ return 0;
+}
+
+/*
+ * Called from CUSE IOCTL: VHOST_SET_VRING_KICK
+ * The virtio device sends an eventfd that it can use to notify us. This fd gets copied in
+ * to our process space.
+ */
+static int
+cuse_set_vring_kick(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
+{
+ struct virtio_net *dev;
+ struct eventfd_copy eventfd_call;
+ struct vhost_virtqueue *vq;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
+ vq = dev->virtqueue[file->index];
+
+ if (vq->callfd)
+ close((int)vq->callfd);
+
+ /* Populate the eventfd_copy structure and call eventfd_copy. */
+ vq->callfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
+ eventfd_call.source_fd = vq->callfd;
+ eventfd_call.target_fd = file->fd;
+ eventfd_call.target_pid = ctx.pid;
+
+ if (eventfd_copy(dev, &eventfd_call))
+ return -1;
+
+ return 0;
+}
+
+/*
+ * Function pointers are set for the device operations to allow CUSE to call functions
+ * when an IOCTL, device_add or device_release is received.
+ */
+static const struct vhost_net_device_ops vhost_cuse_device_ops = {
+ .new_device = new_device,
+ .destroy_device = destroy_device,
+
+ .get_features = get_features,
+ .set_features = set_features,
+
+ .set_mem_table = cuse_set_mem_table,
+
+ .set_vring_num = set_vring_num,
+ .set_vring_addr = set_vring_addr,
+ .set_vring_base = set_vring_base,
+ .get_vring_base = cuse_get_vring_base,
+
+ .set_vring_kick = cuse_set_vring_kick,
+ .set_vring_call = cuse_set_vring_call,
+
+ .set_backend = set_backend,
+
+ .set_owner = set_owner,
+ .reset_owner = reset_owner,
+};
@@ -50,7 +50,6 @@
#include <rte_virtio_net.h>
#include "vhost-net.h"
-#include "eventfd_link/eventfd_link.h"
/**
* Device linked list structure for configuration.
@@ -60,8 +59,6 @@ struct virtio_net_config_ll {
struct virtio_net_config_ll *next; /* Next entry on linked list.*/
};
-const char eventfd_cdev[] = "/dev/eventfd-link";
-
/* device ops to add/remove device to data core. */
static struct virtio_net_device_ops const *notify_ops;
/* Root address of the linked list in the configuration core. */
@@ -71,28 +68,6 @@ static struct virtio_net_config_ll *ll_root;
#define VHOST_SUPPORTED_FEATURES (1ULL << VIRTIO_NET_F_MRG_RXBUF)
static uint64_t VHOST_FEATURES = VHOST_SUPPORTED_FEATURES;
-/* Line size for reading maps file. */
-const uint32_t BUFSIZE = PATH_MAX;
-
-/* Size of prot char array in procmap. */
-#define PROT_SZ 5
-
-/* Number of elements in procmap struct. */
-#define PROCMAP_SZ 8
-
-/* Structure containing information gathered from maps file. */
-struct procmap {
- uint64_t va_start; /* Start virtual address in file. */
- uint64_t va_end; /* End virtual address in file. */
- uint64_t len; /* Size of file. */
- uint64_t pgoff; /* Not used. */
- uint32_t maj; /* Not used. */
- uint32_t min; /* Not used. */
- uint32_t ino; /* Not used. */
- char prot[PROT_SZ]; /* Not used. */
- char fname[PATH_MAX];/* File name. */
-};
-
/*
* Converts QEMU virtual address to Vhost virtual address. This function is used
* to convert the ring addresses to our address space.
@@ -119,173 +94,6 @@ qva_to_vva(struct virtio_net *dev, uint64_t qemu_va)
}
/*
- * Locate the file containing QEMU's memory space and map it to our address space.
- */
-static int
-host_memory_map(struct virtio_net *dev, struct virtio_memory *mem,
- pid_t pid, uint64_t addr)
-{
- struct dirent *dptr = NULL;
- struct procmap procmap;
- DIR *dp = NULL;
- int fd;
- int i;
- char memfile[PATH_MAX];
- char mapfile[PATH_MAX];
- char procdir[PATH_MAX];
- char resolved_path[PATH_MAX];
- char *path = NULL;
- FILE *fmap;
- void *map;
- uint8_t found = 0;
- char line[BUFSIZE];
- char dlm[] = "- : ";
- char *str, *sp, *in[PROCMAP_SZ];
- char *end = NULL;
-
- /* Path where mem files are located. */
- snprintf(procdir, PATH_MAX, "/proc/%u/fd/", pid);
- /* Maps file used to locate mem file. */
- snprintf(mapfile, PATH_MAX, "/proc/%u/maps", pid);
-
- fmap = fopen(mapfile, "r");
- if (fmap == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG,
- "(%"PRIu64") Failed to open maps file for pid %d\n",
- dev->device_fh, pid);
- return -1;
- }
-
- /* Read through maps file until we find out base_address. */
- while (fgets(line, BUFSIZE, fmap) != 0) {
- str = line;
- errno = 0;
- /* Split line in to fields. */
- for (i = 0; i < PROCMAP_SZ; i++) {
- in[i] = strtok_r(str, &dlm[i], &sp);
- if ((in[i] == NULL) || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
- str = NULL;
- }
-
- /* Convert/Copy each field as needed. */
- procmap.va_start = strtoull(in[0], &end, 16);
- if ((in[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.va_end = strtoull(in[1], &end, 16);
- if ((in[1] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.pgoff = strtoull(in[3], &end, 16);
- if ((in[3] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.maj = strtoul(in[4], &end, 16);
- if ((in[4] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.min = strtoul(in[5], &end, 16);
- if ((in[5] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- procmap.ino = strtoul(in[6], &end, 16);
- if ((in[6] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) {
- fclose(fmap);
- return -1;
- }
-
- memcpy(&procmap.prot, in[2], PROT_SZ);
- memcpy(&procmap.fname, in[7], PATH_MAX);
-
- if ((procmap.va_start <= addr) && (procmap.va_end >= addr)) {
- procmap.len = procmap.va_end - procmap.va_start;
- found = 1;
- break;
- }
- }
- fclose(fmap);
-
- if (!found) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find memory file in pid %d maps file\n", dev->device_fh, pid);
- return -1;
- }
-
- /* Find the guest memory file among the process fds. */
- dp = opendir(procdir);
- if (dp == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Cannot open pid %d process directory\n", dev->device_fh, pid);
- return -1;
-
- }
-
- found = 0;
-
- /* Read the fd directory contents. */
- while (NULL != (dptr = readdir(dp))) {
- snprintf(memfile, PATH_MAX, "/proc/%u/fd/%s",
- pid, dptr->d_name);
- path = realpath(memfile, resolved_path);
- if (path == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG,
- "(%"PRIu64") Failed to resolve fd directory\n",
- dev->device_fh);
- closedir(dp);
- return -1;
- }
- if (strncmp(resolved_path, procmap.fname,
- strnlen(procmap.fname, PATH_MAX)) == 0) {
- found = 1;
- break;
- }
- }
-
- closedir(dp);
-
- if (found == 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find memory file for pid %d\n", dev->device_fh, pid);
- return -1;
- }
- /* Open the shared memory file and map the memory into this process. */
- fd = open(memfile, O_RDWR);
-
- if (fd == -1) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to open %s for pid %d\n", dev->device_fh, memfile, pid);
- return -1;
- }
-
- map = mmap(0, (size_t)procmap.len, PROT_READ|PROT_WRITE ,
- MAP_POPULATE|MAP_SHARED, fd, 0);
- close(fd);
-
- if (map == MAP_FAILED) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Error mapping the file %s for pid %d\n", dev->device_fh, memfile, pid);
- return -1;
- }
-
- /* Store the memory address and size in the device data structure */
- mem->mapped_address = (uint64_t)(uintptr_t)map;
- mem->mapped_size = procmap.len;
-
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Mem File: %s->%s - Size: %llu - VA: %p\n", dev->device_fh,
- memfile, resolved_path, (long long unsigned)mem->mapped_size, map);
-
- return 0;
-}
-
-/*
* Retrieves an entry from the devices configuration linked list.
*/
static struct virtio_net_config_ll *
@@ -439,7 +247,7 @@ init_device(struct virtio_net *dev)
}
/*
- * Function is called from the CUSE open function. The device structure is
+ * Function is called from the open function. The device structure is
* initialised and a new entry is added to the device configuration linked
* list.
*/
@@ -492,7 +300,7 @@ new_device(struct vhost_device_ctx ctx)
}
/*
- * Function is called from the CUSE release function. This function will cleanup
+ * Function is called from the release function. This function will cleanup
* the device and remove it from device configuration linked list.
*/
static void
@@ -521,7 +329,7 @@ destroy_device(struct vhost_device_ctx ctx)
}
/*
- * Called from CUSE IOCTL: VHOST_SET_OWNER
+ * Called from IOCTL: VHOST_SET_OWNER
* This function just returns success at the moment unless the device hasn't been initialised.
*/
static int
@@ -537,7 +345,7 @@ set_owner(struct vhost_device_ctx ctx)
}
/*
- * Called from CUSE IOCTL: VHOST_RESET_OWNER
+ * Called from IOCTL: VHOST_RESET_OWNER
*/
static int
reset_owner(struct vhost_device_ctx ctx)
@@ -553,7 +361,7 @@ reset_owner(struct vhost_device_ctx ctx)
}
/*
- * Called from CUSE IOCTL: VHOST_GET_FEATURES
+ * Called from IOCTL: VHOST_GET_FEATURES
* The features that we support are requested.
*/
static int
@@ -571,7 +379,7 @@ get_features(struct vhost_device_ctx ctx, uint64_t *pu)
}
/*
- * Called from CUSE IOCTL: VHOST_SET_FEATURES
+ * Called from IOCTL: VHOST_SET_FEATURES
* We receive the negotiated set of features supported by us and the virtio device.
*/
static int
@@ -605,123 +413,8 @@ set_features(struct vhost_device_ctx ctx, uint64_t *pu)
return 0;
}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_MEM_TABLE
- * This function creates and populates the memory structure for the device. This includes
- * storing offsets used to translate buffer addresses.
- */
-static int
-set_mem_table(struct vhost_device_ctx ctx, const void *mem_regions_addr,
- uint32_t nregions)
-{
- struct virtio_net *dev;
- struct vhost_memory_region *mem_regions;
- struct virtio_memory *mem;
- uint64_t size = offsetof(struct vhost_memory, regions);
- uint32_t regionidx, valid_regions;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- if (dev->mem) {
- munmap((void *)(uintptr_t)dev->mem->mapped_address,
- (size_t)dev->mem->mapped_size);
- free(dev->mem);
- }
-
- /* Malloc the memory structure depending on the number of regions. */
- mem = calloc(1, sizeof(struct virtio_memory) +
- (sizeof(struct virtio_memory_regions) * nregions));
- if (mem == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to allocate memory for dev->mem.\n", dev->device_fh);
- return -1;
- }
-
- mem->nregions = nregions;
-
- mem_regions = (void *)(uintptr_t)
- ((uint64_t)(uintptr_t)mem_regions_addr + size);
-
- for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
- /* Populate the region structure for each region. */
- mem->regions[regionidx].guest_phys_address =
- mem_regions[regionidx].guest_phys_addr;
- mem->regions[regionidx].guest_phys_address_end =
- mem->regions[regionidx].guest_phys_address +
- mem_regions[regionidx].memory_size;
- mem->regions[regionidx].memory_size =
- mem_regions[regionidx].memory_size;
- mem->regions[regionidx].userspace_address =
- mem_regions[regionidx].userspace_addr;
-
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") REGION: %u - GPA: %p - QEMU VA: %p - SIZE (%"PRIu64")\n", dev->device_fh,
- regionidx, (void *)(uintptr_t)mem->regions[regionidx].guest_phys_address,
- (void *)(uintptr_t)mem->regions[regionidx].userspace_address,
- mem->regions[regionidx].memory_size);
-
- /*set the base address mapping*/
- if (mem->regions[regionidx].guest_phys_address == 0x0) {
- mem->base_address = mem->regions[regionidx].userspace_address;
- /* Map VM memory file */
- if (host_memory_map(dev, mem, ctx.pid, mem->base_address) != 0) {
- free(mem);
- return -1;
- }
- }
- }
-
- /* Check that we have a valid base address. */
- if (mem->base_address == 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") Failed to find base address of qemu memory file.\n", dev->device_fh);
- free(mem);
- return -1;
- }
-
- /* Check if all of our regions have valid mappings. Usually one does not exist in the QEMU memory file. */
- valid_regions = mem->nregions;
- for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
- if ((mem->regions[regionidx].userspace_address < mem->base_address) ||
- (mem->regions[regionidx].userspace_address > (mem->base_address + mem->mapped_size)))
- valid_regions--;
- }
-
- /* If a region does not have a valid mapping we rebuild our memory struct to contain only valid entries. */
- if (valid_regions != mem->nregions) {
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") Not all memory regions exist in the QEMU mem file. Re-populating mem structure\n",
- dev->device_fh);
-
- /* Re-populate the memory structure with only valid regions. Invalid regions are over-written with memmove. */
- valid_regions = 0;
-
- for (regionidx = mem->nregions; 0 != regionidx--;) {
- if ((mem->regions[regionidx].userspace_address < mem->base_address) ||
- (mem->regions[regionidx].userspace_address > (mem->base_address + mem->mapped_size))) {
- memmove(&mem->regions[regionidx], &mem->regions[regionidx + 1],
- sizeof(struct virtio_memory_regions) * valid_regions);
- } else {
- valid_regions++;
- }
- }
- }
- mem->nregions = valid_regions;
- dev->mem = mem;
-
- /*
- * Calculate the address offset for each region. This offset is used to identify the vhost virtual address
- * corresponding to a QEMU guest physical address.
- */
- for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
- dev->mem->regions[regionidx].address_offset = dev->mem->regions[regionidx].userspace_address - dev->mem->base_address
- + dev->mem->mapped_address - dev->mem->regions[regionidx].guest_phys_address;
-
- }
- return 0;
-}
-
/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_NUM
+ * Called from IOCTL: VHOST_SET_VRING_NUM
* The virtio device sends us the size of the descriptor ring.
*/
static int
@@ -740,7 +433,7 @@ set_vring_num(struct vhost_device_ctx ctx, struct vhost_vring_state *state)
}
/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_ADDR
+ * Called from IOCTL: VHOST_SET_VRING_ADDR
* The virtio device sends us the desc, used and avail ring addresses. This function
* then converts these to our address space.
*/
@@ -784,7 +477,7 @@ set_vring_addr(struct vhost_device_ctx ctx, struct vhost_vring_addr *addr)
}
/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_BASE
+ * Called from IOCTL: VHOST_SET_VRING_BASE
* The virtio device sends us the available ring last used index.
*/
static int
@@ -804,125 +497,7 @@ set_vring_base(struct vhost_device_ctx ctx, struct vhost_vring_state *state)
}
/*
- * Called from CUSE IOCTL: VHOST_GET_VRING_BASE
- * We send the virtio device our available ring last used index.
- */
-static int
-get_vring_base(struct vhost_device_ctx ctx, uint32_t index,
- struct vhost_vring_state *state)
-{
- struct virtio_net *dev;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- state->index = index;
- /* State->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- state->num = dev->virtqueue[state->index]->last_used_idx;
-
- return 0;
-}
-
-/*
- * This function uses the eventfd_link kernel module to copy an eventfd file descriptor
- * provided by QEMU in to our process space.
- */
-static int
-eventfd_copy(struct virtio_net *dev, struct eventfd_copy *eventfd_copy)
-{
- int eventfd_link, ret;
-
- /* Open the character device to the kernel module. */
- eventfd_link = open(eventfd_cdev, O_RDWR);
- if (eventfd_link < 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") eventfd_link module is not loaded\n", dev->device_fh);
- return -1;
- }
-
- /* Call the IOCTL to copy the eventfd. */
- ret = ioctl(eventfd_link, EVENTFD_COPY, eventfd_copy);
- close(eventfd_link);
-
- if (ret < 0) {
- RTE_LOG(ERR, VHOST_CONFIG, "(%"PRIu64") EVENTFD_COPY ioctl failed\n", dev->device_fh);
- return -1;
- }
-
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_CALL
- * The virtio device sends an eventfd to interrupt the guest. This fd gets copied in
- * to our process space.
- */
-static int
-set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
-{
- struct virtio_net *dev;
- struct eventfd_copy eventfd_kick;
- struct vhost_virtqueue *vq;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- vq = dev->virtqueue[file->index];
-
- if (vq->kickfd)
- close((int)vq->kickfd);
-
- /* Populate the eventfd_copy structure and call eventfd_copy. */
- vq->kickfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
- eventfd_kick.source_fd = vq->kickfd;
- eventfd_kick.target_fd = file->fd;
- eventfd_kick.target_pid = ctx.pid;
-
- if (eventfd_copy(dev, &eventfd_kick))
- return -1;
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_SET_VRING_KICK
- * The virtio device sends an eventfd that it can use to notify us. This fd gets copied in
- * to our process space.
- */
-static int
-set_vring_kick(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
-{
- struct virtio_net *dev;
- struct eventfd_copy eventfd_call;
- struct vhost_virtqueue *vq;
-
- dev = get_device(ctx);
- if (dev == NULL)
- return -1;
-
- /* file->index refers to the queue index. The TX queue is 1, RX queue is 0. */
- vq = dev->virtqueue[file->index];
-
- if (vq->callfd)
- close((int)vq->callfd);
-
- /* Populate the eventfd_copy structure and call eventfd_copy. */
- vq->callfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
- eventfd_call.source_fd = vq->callfd;
- eventfd_call.target_fd = file->fd;
- eventfd_call.target_pid = ctx.pid;
-
- if (eventfd_copy(dev, &eventfd_call))
- return -1;
-
- return 0;
-}
-
-/*
- * Called from CUSE IOCTL: VHOST_NET_SET_BACKEND
+ * Called from IOCTL: VHOST_NET_SET_BACKEND
* To complete device initialisation when the virtio driver is loaded we are provided with a
* valid fd for a tap device (not used by us). If this happens then we can add the device to a
* data core. When the virtio driver is removed we get fd=-1. At that point we remove the device
@@ -953,39 +528,24 @@ set_backend(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
}
/*
- * Function pointers are set for the device operations to allow CUSE to call functions
- * when an IOCTL, device_add or device_release is received.
+ * Include cuse depend functions and definitions.
*/
-static const struct vhost_net_device_ops vhost_device_ops = {
- .new_device = new_device,
- .destroy_device = destroy_device,
-
- .get_features = get_features,
- .set_features = set_features,
-
- .set_mem_table = set_mem_table,
-
- .set_vring_num = set_vring_num,
- .set_vring_addr = set_vring_addr,
- .set_vring_base = set_vring_base,
- .get_vring_base = get_vring_base,
-
- .set_vring_kick = set_vring_kick,
- .set_vring_call = set_vring_call,
-
- .set_backend = set_backend,
-
- .set_owner = set_owner,
- .reset_owner = reset_owner,
-};
+#include "virtio-net-cdev.c"
/*
- * Called by main to setup callbacks when registering CUSE device.
+ * Called by main to setup callbacks when registering device.
*/
struct vhost_net_device_ops const *
-get_virtio_net_callbacks(void)
+get_virtio_net_callbacks(vhost_driver_type_t type)
{
- return &vhost_device_ops;
+ switch (type) {
+ case VHOST_DRV_CUSE:
+ return &vhost_cuse_device_ops;
+ default:
+ break;
+ }
+
+ return NULL;
}
int rte_vhost_enable_guest_notification(struct virtio_net *dev,