@@ -73,6 +73,10 @@ sff_port_module_eeprom_parse(uint16_t port_id, struct rte_tel_data *d)
case RTE_ETH_MODULE_SFF_8079:
sff_8079_show_all(einfo.data, d);
break;
+ case RTE_ETH_MODULE_SFF_8472:
+ sff_8079_show_all(einfo.data, d);
+ sff_8472_show_all(einfo.data, d);
+ break;
default:
RTE_ETHDEV_LOG(NOTICE, "Unsupported module type: %u\n", minfo.type);
break;
@@ -14,6 +14,7 @@ sources = files(
'ethdev_sff_telemetry.c',
'sff_common.c',
'sff_8079.c',
+ 'sff_8472.c',
)
headers = files(
new file mode 100644
@@ -0,0 +1,287 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Intel Corporation
+ *
+ * Implements SFF-8472 optics diagnostics.
+ *
+ */
+
+#include <stdio.h>
+#include <math.h>
+#include <arpa/inet.h>
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+#include <rte_flow.h>
+#include "sff_common.h"
+#include "ethdev_sff_telemetry.h"
+
+/* Offsets in decimal, for direct comparison with the SFF specs */
+
+/* A0-based EEPROM offsets for DOM support checks */
+#define SFF_A0_DOM 92
+#define SFF_A0_OPTIONS 93
+#define SFF_A0_COMP 94
+
+/* EEPROM bit values for various registers */
+#define SFF_A0_DOM_EXTCAL (1 << 4)
+#define SFF_A0_DOM_INTCAL (1 << 5)
+#define SFF_A0_DOM_IMPL (1 << 6)
+#define SFF_A0_DOM_PWRT (1 << 3)
+
+#define SFF_A0_OPTIONS_AW (1 << 7)
+
+/*
+ * This is the offset at which the A2 page is in the EEPROM
+ * blob returned by the kernel.
+ */
+#define SFF_A2_BASE 0x100
+
+/* A2-based offsets for DOM */
+#define SFF_A2_TEMP 96
+#define SFF_A2_TEMP_HALRM 0
+#define SFF_A2_TEMP_LALRM 2
+#define SFF_A2_TEMP_HWARN 4
+#define SFF_A2_TEMP_LWARN 6
+
+#define SFF_A2_VCC 98
+#define SFF_A2_VCC_HALRM 8
+#define SFF_A2_VCC_LALRM 10
+#define SFF_A2_VCC_HWARN 12
+#define SFF_A2_VCC_LWARN 14
+
+#define SFF_A2_BIAS 100
+#define SFF_A2_BIAS_HALRM 16
+#define SFF_A2_BIAS_LALRM 18
+#define SFF_A2_BIAS_HWARN 20
+#define SFF_A2_BIAS_LWARN 22
+
+#define SFF_A2_TX_PWR 102
+#define SFF_A2_TX_PWR_HALRM 24
+#define SFF_A2_TX_PWR_LALRM 26
+#define SFF_A2_TX_PWR_HWARN 28
+#define SFF_A2_TX_PWR_LWARN 30
+
+#define SFF_A2_RX_PWR 104
+#define SFF_A2_RX_PWR_HALRM 32
+#define SFF_A2_RX_PWR_LALRM 34
+#define SFF_A2_RX_PWR_HWARN 36
+#define SFF_A2_RX_PWR_LWARN 38
+
+#define SFF_A2_ALRM_FLG 112
+#define SFF_A2_WARN_FLG 116
+
+/* 32-bit little-endian calibration constants */
+#define SFF_A2_CAL_RXPWR4 56
+#define SFF_A2_CAL_RXPWR3 60
+#define SFF_A2_CAL_RXPWR2 64
+#define SFF_A2_CAL_RXPWR1 68
+#define SFF_A2_CAL_RXPWR0 72
+
+/* 16-bit little endian calibration constants */
+#define SFF_A2_CAL_TXI_SLP 76
+#define SFF_A2_CAL_TXI_OFF 78
+#define SFF_A2_CAL_TXPWR_SLP 80
+#define SFF_A2_CAL_TXPWR_OFF 82
+#define SFF_A2_CAL_T_SLP 84
+#define SFF_A2_CAL_T_OFF 86
+#define SFF_A2_CAL_V_SLP 88
+#define SFF_A2_CAL_V_OFF 90
+
+static struct sff_8472_aw_flags {
+ const char *str; /* Human-readable string, null at the end */
+ int offset; /* A2-relative address offset */
+ uint8_t value; /* Alarm is on if (offset & value) != 0. */
+} sff_8472_aw_flags[] = {
+ { "Laser bias current high alarm", SFF_A2_ALRM_FLG, (1 << 3) },
+ { "Laser bias current low alarm", SFF_A2_ALRM_FLG, (1 << 2) },
+ { "Laser bias current high warning", SFF_A2_WARN_FLG, (1 << 3) },
+ { "Laser bias current low warning", SFF_A2_WARN_FLG, (1 << 2) },
+
+ { "Laser output power high alarm", SFF_A2_ALRM_FLG, (1 << 1) },
+ { "Laser output power low alarm", SFF_A2_ALRM_FLG, (1 << 0) },
+ { "Laser output power high warning", SFF_A2_WARN_FLG, (1 << 1) },
+ { "Laser output power low warning", SFF_A2_WARN_FLG, (1 << 0) },
+
+ { "Module temperature high alarm", SFF_A2_ALRM_FLG, (1 << 7) },
+ { "Module temperature low alarm", SFF_A2_ALRM_FLG, (1 << 6) },
+ { "Module temperature high warning", SFF_A2_WARN_FLG, (1 << 7) },
+ { "Module temperature low warning", SFF_A2_WARN_FLG, (1 << 6) },
+
+ { "Module voltage high alarm", SFF_A2_ALRM_FLG, (1 << 5) },
+ { "Module voltage low alarm", SFF_A2_ALRM_FLG, (1 << 4) },
+ { "Module voltage high warning", SFF_A2_WARN_FLG, (1 << 5) },
+ { "Module voltage low warning", SFF_A2_WARN_FLG, (1 << 4) },
+
+ { "Laser rx power high alarm", SFF_A2_ALRM_FLG + 1, (1 << 7) },
+ { "Laser rx power low alarm", SFF_A2_ALRM_FLG + 1, (1 << 6) },
+ { "Laser rx power high warning", SFF_A2_WARN_FLG + 1, (1 << 7) },
+ { "Laser rx power low warning", SFF_A2_WARN_FLG + 1, (1 << 6) },
+
+ { NULL, 0, 0 },
+};
+
+/* Most common case: 16-bit unsigned integer in a certain unit */
+#define A2_OFFSET_TO_U16(offset) \
+ (data[SFF_A2_BASE + (offset)] << 8 | data[SFF_A2_BASE + (offset) + 1])
+
+/* Calibration slope is a number between 0.0 included and 256.0 excluded. */
+#define A2_OFFSET_TO_SLP(offset) \
+ (data[SFF_A2_BASE + (offset)] + data[SFF_A2_BASE + (offset) + 1] / 256.)
+
+/* Calibration offset is an integer from -32768 to 32767 */
+#define A2_OFFSET_TO_OFF(offset) \
+ ((int16_t)A2_OFFSET_TO_U16(offset))
+
+/* RXPWR(x) are IEEE-754 floating point numbers in big-endian format */
+#define A2_OFFSET_TO_RXPWRx(offset) \
+ (befloattoh((const uint32_t *)(data + SFF_A2_BASE + (offset))))
+
+/*
+ * 2-byte internal temperature conversions:
+ * First byte is a signed 8-bit integer, which is the temp decimal part
+ * Second byte are 1/256th of degree, which are added to the dec part.
+ */
+#define A2_OFFSET_TO_TEMP(offset) ((int16_t)A2_OFFSET_TO_U16(offset))
+
+static void sff_8472_dom_parse(const uint8_t *data, struct sff_diags *sd)
+{
+ sd->bias_cur[MCURR] = A2_OFFSET_TO_U16(SFF_A2_BIAS);
+ sd->bias_cur[HALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HALRM);
+ sd->bias_cur[LALRM] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LALRM);
+ sd->bias_cur[HWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_HWARN);
+ sd->bias_cur[LWARN] = A2_OFFSET_TO_U16(SFF_A2_BIAS_LWARN);
+
+ sd->sfp_voltage[MCURR] = A2_OFFSET_TO_U16(SFF_A2_VCC);
+ sd->sfp_voltage[HALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_HALRM);
+ sd->sfp_voltage[LALRM] = A2_OFFSET_TO_U16(SFF_A2_VCC_LALRM);
+ sd->sfp_voltage[HWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_HWARN);
+ sd->sfp_voltage[LWARN] = A2_OFFSET_TO_U16(SFF_A2_VCC_LWARN);
+
+ sd->tx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR);
+ sd->tx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HALRM);
+ sd->tx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LALRM);
+ sd->tx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_HWARN);
+ sd->tx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_TX_PWR_LWARN);
+
+ sd->rx_power[MCURR] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR);
+ sd->rx_power[HALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HALRM);
+ sd->rx_power[LALRM] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LALRM);
+ sd->rx_power[HWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_HWARN);
+ sd->rx_power[LWARN] = A2_OFFSET_TO_U16(SFF_A2_RX_PWR_LWARN);
+
+ sd->sfp_temp[MCURR] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP);
+ sd->sfp_temp[HALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HALRM);
+ sd->sfp_temp[LALRM] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LALRM);
+ sd->sfp_temp[HWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_HWARN);
+ sd->sfp_temp[LWARN] = A2_OFFSET_TO_TEMP(SFF_A2_TEMP_LWARN);
+}
+
+/* Converts to a float from a big-endian 4-byte source buffer. */
+static float befloattoh(const uint32_t *source)
+{
+ union {
+ uint32_t src;
+ float dst;
+ } converter;
+
+ converter.src = ntohl(*source);
+ return converter.dst;
+}
+
+static void sff_8472_calibration(const uint8_t *data, struct sff_diags *sd)
+{
+ unsigned long i;
+ uint16_t rx_reading;
+
+ /* Calibration should occur for all values (threshold and current) */
+ for (i = 0; i < RTE_DIM(sd->bias_cur); ++i) {
+ /*
+ * Apply calibration formula 1 (Temp., Voltage, Bias, Tx Power)
+ */
+ sd->bias_cur[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXI_SLP);
+ sd->tx_power[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_TXPWR_SLP);
+ sd->sfp_voltage[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_V_SLP);
+ sd->sfp_temp[i] *= A2_OFFSET_TO_SLP(SFF_A2_CAL_T_SLP);
+
+ sd->bias_cur[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXI_OFF);
+ sd->tx_power[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_TXPWR_OFF);
+ sd->sfp_voltage[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_V_OFF);
+ sd->sfp_temp[i] += A2_OFFSET_TO_OFF(SFF_A2_CAL_T_OFF);
+
+ /*
+ * Apply calibration formula 2 (Rx Power only)
+ */
+ rx_reading = sd->rx_power[i];
+ sd->rx_power[i] = A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR0);
+ sd->rx_power[i] += rx_reading *
+ A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR1);
+ sd->rx_power[i] += rx_reading *
+ A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR2);
+ sd->rx_power[i] += rx_reading *
+ A2_OFFSET_TO_RXPWRx(SFF_A2_CAL_RXPWR3);
+ }
+}
+
+static void sff_8472_parse_eeprom(const uint8_t *data, struct sff_diags *sd)
+{
+ sd->supports_dom = data[SFF_A0_DOM] & SFF_A0_DOM_IMPL;
+ sd->supports_alarms = data[SFF_A0_OPTIONS] & SFF_A0_OPTIONS_AW;
+ sd->calibrated_ext = data[SFF_A0_DOM] & SFF_A0_DOM_EXTCAL;
+ sd->rx_power_type = data[SFF_A0_DOM] & SFF_A0_DOM_PWRT;
+
+ sff_8472_dom_parse(data, sd);
+
+ /*
+ * If the SFP is externally calibrated, we need to read calibration data
+ * and compensate the already stored readings.
+ */
+ if (sd->calibrated_ext)
+ sff_8472_calibration(data, sd);
+}
+
+void sff_8472_show_all(const uint8_t *data, struct rte_tel_data *d)
+{
+ struct sff_diags sd = {0};
+ const char *rx_power_string = NULL;
+ char val_string[SFF_ITEM_VAL_COMPOSE_SIZE];
+ int i;
+
+ sff_8472_parse_eeprom(data, &sd);
+
+ if (!sd.supports_dom) {
+ ssf_add_dict_string(d, "Optical diagnostics support", "No");
+ return;
+ }
+ ssf_add_dict_string(d, "Optical diagnostics support", "Yes");
+
+ SPRINT_BIAS(val_string, sd.bias_cur[MCURR]);
+ ssf_add_dict_string(d, "Laser bias current", val_string);
+
+ SPRINT_xX_PWR(val_string, sd.tx_power[MCURR]);
+ ssf_add_dict_string(d, "Laser output power", val_string);
+
+ if (!sd.rx_power_type)
+ rx_power_string = "Receiver signal OMA";
+ else
+ rx_power_string = "Receiver signal average optical power";
+
+ SPRINT_xX_PWR(val_string, sd.rx_power[MCURR]);
+ ssf_add_dict_string(d, rx_power_string, val_string);
+
+ SPRINT_TEMP(val_string, sd.sfp_temp[MCURR]);
+ ssf_add_dict_string(d, "Module temperature", val_string);
+
+ SPRINT_VCC(val_string, sd.sfp_voltage[MCURR]);
+ ssf_add_dict_string(d, "Module voltage", val_string);
+
+ ssf_add_dict_string(d, "Alarm/warning flags implemented",
+ (sd.supports_alarms ? "Yes" : "No"));
+
+ if (sd.supports_alarms) {
+ for (i = 0; sff_8472_aw_flags[i].str; ++i) {
+ ssf_add_dict_string(d, sff_8472_aw_flags[i].str,
+ data[SFF_A2_BASE + sff_8472_aw_flags[i].offset]
+ & sff_8472_aw_flags[i].value ? "On" : "Off");
+ }
+ sff_show_thresholds(sd, d);
+ }
+}