diff mbox series

[V1,1/2] test_plans/dynamic_flowtype: remove a cmd to adapt dpdk

Message ID 1622620919-59787-2-git-send-email-xiangx.an@intel.com (mailing list archive)
State Accepted
Headers
Series dynamic_flowtype: remove a cmd to adapt dpdk |

Commit Message

Xiang An June 2, 2021, 8:01 a.m. UTC 
  Signed-off-by: Xiang An <xiangx.an@intel.com>
---
 test_plans/dynamic_flowtype_test_plan.rst | 48 +++++++++++--------------------
 1 file changed, 16 insertions(+), 32 deletions(-)

Comments

Lin, Xueqin June 7, 2021, 8:53 a.m. UTC | #1 
> -----Original Message-----
> From: An, XiangX <xiangx.an@intel.com>
> Sent: Wednesday, June 2, 2021 4:02 PM
> To: dts@dpdk.org
> Cc: Lin, Xueqin <xueqin.lin@intel.com>; An, XiangX <xiangx.an@intel.com>
> Subject: [dts][PATCH V1 1/2] test_plans/dynamic_flowtype: remove a cmd to
> adapt dpdk
> 
> Signed-off-by: Xiang An <xiangx.an@intel.com>
Acked-by: Xueqin Lin <Xueqin.lin@intel.com>
diff mbox series

Patch

diff --git a/test_plans/dynamic_flowtype_test_plan.rst b/test_plans/dynamic_flowtype_test_plan.rst
index 83ed5eb..ad68536 100644
--- a/test_plans/dynamic_flowtype_test_plan.rst
+++ b/test_plans/dynamic_flowtype_test_plan.rst
@@ -176,22 +176,18 @@  Test Case: Update flow type to GTP-U IPv4 pctype mapping item
 
     testpmd> show port 0 pctype mapping
 	
-4. Add udp key to hash input set for flow type id 26 on port 0::
-
-    testpmd> set_hash_input_set 0 26 udp-key add
-
-5. Enable flow type id 26's RSS::
+4. Enable flow type id 26's RSS::
 
     testpmd> port config all rss 26
 
-6. Start testpmd
+5. Start testpmd
 
-7. Send GTP-U IPv4 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-U IPv4 packets, check RSS could work, print PKT_RX_RSS_HASH::
 
     >>> p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header()/IP()/Raw('x'*20)
     >>> p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP()/Raw('x'*20)
 
-8. Send GTP-U IPv6, GTP-U PAY4 and GTP-C PAY4 packets, check receive packets 
+7. Send GTP-U IPv6, GTP-U PAY4 and GTP-C PAY4 packets, check receive packets 
    from queue 0 and don't have PKT_RX_RSS_HASH print.
   
 
@@ -209,22 +205,18 @@  Test Case: Update flow type to GTP-U IPv6 pctype mapping item
 
     testpmd> show port 0 pctype mapping
 	
-4. Add udp key to hash input set for flow type id 23 on port 0::
-
-    testpmd> set_hash_input_set 0 23 udp-key add
-
-5. Enable flow type id 23's RSS::
+4. Enable flow type id 23's RSS::
 
     testpmd> port config all rss 23
 
-6. Start testpmd
+5. Start testpmd
 
-7. Send GTP-U IPv6 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-U IPv6 packets, check RSS could work, print PKT_RX_RSS_HASH::
 
     >>> p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header()/IPv6()/Raw('x'*20)
     >>> p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IPv6()/Raw('x'*20)
 
-8. Send GTP-U IPv4, GTP-U PAY4 and GTP-C PAY4 packets, check receive 
+7. Send GTP-U IPv4, GTP-U PAY4 and GTP-C PAY4 packets, check receive 
    packets from queue 0 and don't have PKT_RX_RSS_HASH print
   
 
@@ -243,22 +235,18 @@  Test Case: Update flow type to GTP-U PAY4 pctype mapping item
 
     testpmd> show port 0 pctype mapping
 	
-4. Add udp key to hash input set for flow type id 24 on port 0::
-
-    testpmd> set_hash_input_set 0 24 udp-key add
-
-5. Enable flow type id 24's RSS::
+4. Enable flow type id 24's RSS::
 
     testpmd> port config all rss 24
 
-6. Start testpmd
+5. Start testpmd
 
-7. Send GTP-U, PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-U, PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
 
     >>> p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header()/Raw('x'*20)
     >>> p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/Raw('x'*20)
 
-8. Send GTP-U IPv4, GTP-U IPv6 and GTP-C PAY4 packets, check receive 
+7. Send GTP-U IPv4, GTP-U IPv6 and GTP-C PAY4 packets, check receive 
    packets from queue 0 and don't have PKT_RX_RSS_HASH print.
  
 	  
@@ -274,22 +262,18 @@  Test Case: Update flow type to GTP-C PAY4 pctype mapping item
 	
 3. Check flow ptype to pctype mapping adds 25 this mapping 
 	
-4. Add udp key to hash input set for flow type id 25 on port 0::
-
-    testpmd> set_hash_input_set 0 25 udp-key add
-
-5. Enable flow type id 25's RSS::
+4. Enable flow type id 25's RSS::
 
     testpmd> port config all rss 25
 
-6. Start testpmd
+5. Start testpmd
 
-7. Send GTP-C PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-C PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
 
     >>> p=Ether()/IP()/UDP(dport=2123)/GTP_U_Header()/Raw('x'*20)
     >>> p=Ether()/IPv6()/UDP(dport=2123)/GTP_U_Header()/Raw('x'*20)
 
-8. Send GTP-U IPv4, GTP-U IPv6 and GTP-U PAY4 packets, check receive packets
+7. Send GTP-U IPv4, GTP-U IPv6 and GTP-U PAY4 packets, check receive packets
    from queue 0 and don't have PKT_RX_RSS_HASH print.