[V1] tests/cvl_dcf_switch_filter: set vf vlan for dcf mode
Commit Message
Confirm with developer, dpdk is changed for VF DCF mode,
'vf-vlan-prune-disable' needs to be set before VF receives VLAN packets
Signed-off-by: Qin Sun <qinx.sun@intel.com>
---
tests/TestSuite_cvl_dcf_switch_filter.py | 4 ++++
tests/TestSuite_cvl_dcf_switch_filter_pppoe.py | 4 ++++
2 files changed, 8 insertions(+)
mode change 100755 => 100644 tests/TestSuite_cvl_dcf_switch_filter.py
Comments
> -----Original Message-----
> From: Sun, QinX <qinx.sun@intel.com>
> Sent: Saturday, May 1, 2021 12:57 AM
> To: dts@dpdk.org
> Cc: Sun, QinX <qinx.sun@intel.com>
> Subject: [dts] [PATCH V1] tests/cvl_dcf_switch_filter: set vf vlan for dcf mode
Tested-by: Qin Sun <qinx.sun@intel.com>
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Sun, QinX
> Sent: 2021年5月6日 12:08
> To: dts@dpdk.org
> Subject: Re: [dts] [PATCH V1] tests/cvl_dcf_switch_filter: set vf vlan for dcf
> mode
>
> > -----Original Message-----
> > From: Sun, QinX <qinx.sun@intel.com>
> > Sent: Saturday, May 1, 2021 12:57 AM
> > To: dts@dpdk.org
> > Cc: Sun, QinX <qinx.sun@intel.com>
> > Subject: [dts] [PATCH V1] tests/cvl_dcf_switch_filter: set vf vlan for dcf mode
>
> Tested-by: Qin Sun <qinx.sun@intel.com>
Applied
old mode 100755
new mode 100644
@@ -1025,6 +1025,8 @@ class CVLDCFSwitchFilterTest(TestCase):
# Verify that enough ports are available
self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
localPort = self.tester.get_local_port(self.dut_ports[0])
+ self.used_dut_port_0 = self.dut_ports[0]
+ self.pf0_intf = self.dut.ports_info[self.used_dut_port_0]['intf']
self.__tx_iface = self.tester.get_interface(localPort)
self.pkt = Packet()
self.testpmd_status = "close"
@@ -1042,6 +1044,7 @@ class CVLDCFSwitchFilterTest(TestCase):
#get PF interface name
self.pf0_intf = self.dut.ports_info[self.used_dut_port_0]['intf']
out = self.dut.send_expect('ethtool -i %s' % self.pf0_intf, '#')
+ self.dut.send_expect('ethtool --set-priv-flags {} vf-vlan-prune-disable on'.format(self.pf0_intf), '#')
#generate 4 VFs on PF
self.dut.generate_sriov_vfs_by_port(self.used_dut_port_0, 4, driver=driver)
self.sriov_vfs_port_0 = self.dut.ports_info[self.used_dut_port_0]['vfs_port']
@@ -1877,4 +1880,5 @@ class CVLDCFSwitchFilterTest(TestCase):
"""
Run after each test suite.
"""
+ self.dut.send_expect('ethtool --set-priv-flags {} vf-vlan-prune-disable off'.format(self.pf0_intf), '#')
self.dut.kill_all()
@@ -521,6 +521,8 @@ class CVLDCFSwitchFilterPPPOETest(TestCase):
# Verify that enough ports are available
self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
localPort = self.tester.get_local_port(self.dut_ports[0])
+ self.used_dut_port_0 = self.dut_ports[0]
+ self.pf0_intf = self.dut.ports_info[self.used_dut_port_0]['intf']
self.__tx_iface = self.tester.get_interface(localPort)
self.pkt = Packet()
self.testpmd_status = "close"
@@ -538,6 +540,7 @@ class CVLDCFSwitchFilterPPPOETest(TestCase):
#get PF interface name
self.pf0_intf = self.dut.ports_info[self.used_dut_port_0]['intf']
out = self.dut.send_expect('ethtool -i %s' % self.pf0_intf, '#')
+ self.dut.send_expect('ethtool --set-priv-flags {} vf-vlan-prune-disable on'.format(self.pf0_intf), '#')
#generate 4 VFs on PF
self.dut.generate_sriov_vfs_by_port(self.used_dut_port_0, 4, driver=driver)
self.sriov_vfs_port_0 = self.dut.ports_info[self.used_dut_port_0]['vfs_port']
@@ -913,4 +916,5 @@ class CVLDCFSwitchFilterPPPOETest(TestCase):
"""
Run after each test suite.
"""
+ self.dut.send_expect('ethtool --set-priv-flags {} vf-vlan-prune-disable off'.format(self.pf0_intf), '#')
self.dut.kill_all()