[V1,1/2] test_plans/rxtx_offload_test_plan: adapt to CVL NIC
Commit Message
for ice NIC, it failed to enable mbuf_fast_free per_queue.
Signed-off-by: xiewei <weix.xie@intel.com>
---
test_plans/rxtx_offload_test_plan.rst | 14 ++++++++++++++
1 file changed, 14 insertions(+)
Comments
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of xiewei
> Sent: 2021年4月1日 0:47
> To: dts@dpdk.org
> Cc: Xie, WeiX <weix.xie@intel.com>
> Subject: [dts] [PATCH V1 1/2] test_plans/rxtx_offload_test_plan: adapt to CVL
> NIC
>
> for ice NIC, it failed to enable mbuf_fast_free per_queue.
>
> Signed-off-by: xiewei <weix.xie@intel.com>
> ---
> test_plans/rxtx_offload_test_plan.rst | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/test_plans/rxtx_offload_test_plan.rst
> b/test_plans/rxtx_offload_test_plan.rst
> index 246e1e16..b107aba7 100644
> --- a/test_plans/rxtx_offload_test_plan.rst
> +++ b/test_plans/rxtx_offload_test_plan.rst
> @@ -643,6 +643,20 @@ Test case: FVL Tx offload per-queue setting
>
> The port fwd can be started normally.
>
> +Note:
> +
> +But for ice NIC, it failed to enable mbuf_fast_free per_queue::
> +
> + testpmd> port stop 0
> + testpmd> port 0 txq 0 tx_offload mbuf_fast_free on
> + testpmd> port 0 txq 1 tx_offload mbuf_fast_free on
> + testpmd> port 0 txq 2 tx_offload mbuf_fast_free on
> + testpmd> port 0 txq 3 tx_offload mbuf_fast_free on
> + testpmd> port start 0
> + Configuring Port 0 (socket 0)
> + Ethdev port_id=0 tx_queue_id=0, new added offloads 0x10000 must be
> within per-queue offload capabilities 0x0 in rte_eth_tx_queue_setup()
> + Fail to configure port 0 tx queues
Seems it is a bug on cvl, at least a feature gap.
> 4. Disable mbuf_fast_free per_queue::
>
> testpmd> port stop 0
> --
> 2.17.1
@@ -643,6 +643,20 @@ Test case: FVL Tx offload per-queue setting
The port fwd can be started normally.
+Note:
+
+But for ice NIC, it failed to enable mbuf_fast_free per_queue::
+
+ testpmd> port stop 0
+ testpmd> port 0 txq 0 tx_offload mbuf_fast_free on
+ testpmd> port 0 txq 1 tx_offload mbuf_fast_free on
+ testpmd> port 0 txq 2 tx_offload mbuf_fast_free on
+ testpmd> port 0 txq 3 tx_offload mbuf_fast_free on
+ testpmd> port start 0
+ Configuring Port 0 (socket 0)
+ Ethdev port_id=0 tx_queue_id=0, new added offloads 0x10000 must be within per-queue offload capabilities 0x0 in rte_eth_tx_queue_setup()
+ Fail to configure port 0 tx queues
+
4. Disable mbuf_fast_free per_queue::
testpmd> port stop 0