[4/6] net/mlx5: separate Tx burst template to header file
Checks
Commit Message
This patch moves Tx burst and its inline functions declarations to
header file to allow its use from several separate source files and as a
possible preparation for Tx cleanup.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
---
drivers/net/mlx5/mlx5_rxtx.c | 3331 +-----------------------------------------
drivers/net/mlx5/mlx5_tx.h | 3304 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 3305 insertions(+), 3330 deletions(-)
Comments
> -----Original Message-----
> From: Michael Baum <michaelba@nvidia.com>
> Sent: Monday, April 5, 2021 17:01
> To: dev@dpdk.org
> Cc: Matan Azrad <matan@nvidia.com>; Raslan Darawsheh
> <rasland@nvidia.com>; Slava Ovsiienko <viacheslavo@nvidia.com>
> Subject: [PATCH 4/6] net/mlx5: separate Tx burst template to header file
>
> This patch moves Tx burst and its inline functions declarations to
> header file to allow its use from several separate source files and as a
> possible preparation for Tx cleanup.
>
> Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
> ---
> drivers/net/mlx5/mlx5_rxtx.c | 3331 +-----------------------------------------
> drivers/net/mlx5/mlx5_tx.h | 3304
> +++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 3305 insertions(+), 3330 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
> index 57ff407..2f36754 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.c
> +++ b/drivers/net/mlx5/mlx5_rxtx.c
> @@ -28,57 +28,6 @@
> #include "mlx5_rx.h"
> #include "mlx5_tx.h"
>
> -/* TX burst subroutines return codes. */
> -enum mlx5_txcmp_code {
> - MLX5_TXCMP_CODE_EXIT = 0,
> - MLX5_TXCMP_CODE_ERROR,
> - MLX5_TXCMP_CODE_SINGLE,
> - MLX5_TXCMP_CODE_MULTI,
> - MLX5_TXCMP_CODE_TSO,
> - MLX5_TXCMP_CODE_EMPW,
> -};
> -
> -/*
> - * These defines are used to configure Tx burst routine option set
> - * supported at compile time. The not specified options are optimized out
> - * out due to if conditions can be explicitly calculated at compile time.
> - * The offloads with bigger runtime check (require more CPU cycles to
> - * skip) overhead should have the bigger index - this is needed to
> - * select the better matching routine function if no exact match and
> - * some offloads are not actually requested.
> - */
> -#define MLX5_TXOFF_CONFIG_MULTI (1u << 0) /* Multi-segment
> packets.*/
> -#define MLX5_TXOFF_CONFIG_TSO (1u << 1) /* TCP send offload
> supported.*/
> -#define MLX5_TXOFF_CONFIG_SWP (1u << 2) /* Tunnels/SW Parser
> offloads.*/
> -#define MLX5_TXOFF_CONFIG_CSUM (1u << 3) /* Check Sums offloaded.
> */
> -#define MLX5_TXOFF_CONFIG_INLINE (1u << 4) /* Data inlining supported.
> */
> -#define MLX5_TXOFF_CONFIG_VLAN (1u << 5) /* VLAN insertion
> supported.*/
> -#define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
> -#define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW
> supported.*/
> -#define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW
> supported.*/
> -#define MLX5_TXOFF_CONFIG_TXPP (1u << 10) /* Scheduling on
> timestamp.*/
> -
> -/* The most common offloads groups. */
> -#define MLX5_TXOFF_CONFIG_NONE 0
> -#define MLX5_TXOFF_CONFIG_FULL (MLX5_TXOFF_CONFIG_MULTI | \
> - MLX5_TXOFF_CONFIG_TSO | \
> - MLX5_TXOFF_CONFIG_SWP | \
> - MLX5_TXOFF_CONFIG_CSUM | \
> - MLX5_TXOFF_CONFIG_INLINE | \
> - MLX5_TXOFF_CONFIG_VLAN | \
> - MLX5_TXOFF_CONFIG_METADATA)
> -
> -#define MLX5_TXOFF_CONFIG(mask) (olx &
> MLX5_TXOFF_CONFIG_##mask)
> -
> -#define MLX5_TXOFF_DECL(func, olx) \
> -static uint16_t mlx5_tx_burst_##func(void *txq, \
> - struct rte_mbuf **pkts, \
> - uint16_t pkts_n) \
> -{ \
> - return mlx5_tx_burst_tmpl((struct mlx5_txq_data *)txq, \
> - pkts, pkts_n, (olx)); \
> -}
> -
> #define MLX5_TXOFF_INFO(func, olx) {mlx5_tx_burst_##func, olx},
>
> /* static asserts */
> @@ -139,7 +88,6 @@ enum mlx5_txcmp_code {
> uint8_t mlx5_swp_types_table[1 << 10] __rte_cache_aligned;
>
> uint64_t rte_net_mlx5_dynf_inline_mask;
> -#define PKT_TX_DYNF_NOINLINE rte_net_mlx5_dynf_inline_mask
>
> /**
> * Build a table to translate Rx completion flags to packet type.
> @@ -366,109 +314,6 @@ enum mlx5_txcmp_code {
> }
> }
>
> -/**
> - * Set Software Parser flags and offsets in Ethernet Segment of WQE.
> - * Flags must be preliminary initialized to zero.
> - *
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param swp_flags
> - * Pointer to store Software Parser flags
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * Software Parser offsets packed in dword.
> - * Software Parser flags are set by pointer.
> - */
> -static __rte_always_inline uint32_t
> -txq_mbuf_to_swp(struct mlx5_txq_local *__rte_restrict loc,
> - uint8_t *swp_flags,
> - unsigned int olx)
> -{
> - uint64_t ol, tunnel;
> - unsigned int idx, off;
> - uint32_t set;
> -
> - if (!MLX5_TXOFF_CONFIG(SWP))
> - return 0;
> - ol = loc->mbuf->ol_flags;
> - tunnel = ol & PKT_TX_TUNNEL_MASK;
> - /*
> - * Check whether Software Parser is required.
> - * Only customized tunnels may ask for.
> - */
> - if (likely(tunnel != PKT_TX_TUNNEL_UDP && tunnel !=
> PKT_TX_TUNNEL_IP))
> - return 0;
> - /*
> - * The index should have:
> - * bit[0:1] = PKT_TX_L4_MASK
> - * bit[4] = PKT_TX_IPV6
> - * bit[8] = PKT_TX_OUTER_IPV6
> - * bit[9] = PKT_TX_OUTER_UDP
> - */
> - idx = (ol & (PKT_TX_L4_MASK | PKT_TX_IPV6 |
> PKT_TX_OUTER_IPV6)) >> 52;
> - idx |= (tunnel == PKT_TX_TUNNEL_UDP) ? (1 << 9) : 0;
> - *swp_flags = mlx5_swp_types_table[idx];
> - /*
> - * Set offsets for SW parser. Since ConnectX-5, SW parser just
> - * complements HW parser. SW parser starts to engage only if HW
> parser
> - * can't reach a header. For the older devices, HW parser will not kick
> - * in if any of SWP offsets is set. Therefore, all of the L3 offsets
> - * should be set regardless of HW offload.
> - */
> - off = loc->mbuf->outer_l2_len;
> - if (MLX5_TXOFF_CONFIG(VLAN) && ol & PKT_TX_VLAN_PKT)
> - off += sizeof(struct rte_vlan_hdr);
> - set = (off >> 1) << 8; /* Outer L3 offset. */
> - off += loc->mbuf->outer_l3_len;
> - if (tunnel == PKT_TX_TUNNEL_UDP)
> - set |= off >> 1; /* Outer L4 offset. */
> - if (ol & (PKT_TX_IPV4 | PKT_TX_IPV6)) { /* Inner IP. */
> - const uint64_t csum = ol & PKT_TX_L4_MASK;
> - off += loc->mbuf->l2_len;
> - set |= (off >> 1) << 24; /* Inner L3 offset. */
> - if (csum == PKT_TX_TCP_CKSUM ||
> - csum == PKT_TX_UDP_CKSUM ||
> - (MLX5_TXOFF_CONFIG(TSO) && ol & PKT_TX_TCP_SEG)) {
> - off += loc->mbuf->l3_len;
> - set |= (off >> 1) << 16; /* Inner L4 offset. */
> - }
> - }
> - set = rte_cpu_to_le_32(set);
> - return set;
> -}
> -
> -/**
> - * Convert the Checksum offloads to Verbs.
> - *
> - * @param buf
> - * Pointer to the mbuf.
> - *
> - * @return
> - * Converted checksum flags.
> - */
> -static __rte_always_inline uint8_t
> -txq_ol_cksum_to_cs(struct rte_mbuf *buf)
> -{
> - uint32_t idx;
> - uint8_t is_tunnel = !!(buf->ol_flags & PKT_TX_TUNNEL_MASK);
> - const uint64_t ol_flags_mask = PKT_TX_TCP_SEG |
> PKT_TX_L4_MASK |
> - PKT_TX_IP_CKSUM |
> PKT_TX_OUTER_IP_CKSUM;
> -
> - /*
> - * The index should have:
> - * bit[0] = PKT_TX_TCP_SEG
> - * bit[2:3] = PKT_TX_UDP_CKSUM, PKT_TX_TCP_CKSUM
> - * bit[4] = PKT_TX_IP_CKSUM
> - * bit[8] = PKT_TX_OUTER_IP_CKSUM
> - * bit[9] = tunnel
> - */
> - idx = ((buf->ol_flags & ol_flags_mask) >> 50) | (!!is_tunnel << 9);
> - return mlx5_cksum_table[idx];
> -}
> -
> #define MLX5_SYSTEM_LOG_DIR "/var/log"
> /**
> * Dump debug information to log file.
> @@ -720,214 +565,6 @@ enum mlx5_txcmp_code {
> }
>
> /**
> - * Free the mbufs from the linear array of pointers.
> - *
> - * @param txq
> - * Pointer to Tx queue structure.
> - * @param pkts
> - * Pointer to array of packets to be free.
> - * @param pkts_n
> - * Number of packets to be freed.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - unsigned int pkts_n,
> - unsigned int olx __rte_unused)
> -{
> - struct rte_mempool *pool = NULL;
> - struct rte_mbuf **p_free = NULL;
> - struct rte_mbuf *mbuf;
> - unsigned int n_free = 0;
> -
> - /*
> - * The implemented algorithm eliminates
> - * copying pointers to temporary array
> - * for rte_mempool_put_bulk() calls.
> - */
> - MLX5_ASSERT(pkts);
> - MLX5_ASSERT(pkts_n);
> - /*
> - * Free mbufs directly to the pool in bulk
> - * if fast free offload is engaged
> - */
> - if (!MLX5_TXOFF_CONFIG(MULTI) && txq->fast_free) {
> - mbuf = *pkts;
> - pool = mbuf->pool;
> - rte_mempool_put_bulk(pool, (void *)pkts, pkts_n);
> - return;
> - }
> - for (;;) {
> - for (;;) {
> - /*
> - * Decrement mbuf reference counter, detach
> - * indirect and external buffers if needed.
> - */
> - mbuf = rte_pktmbuf_prefree_seg(*pkts);
> - if (likely(mbuf != NULL)) {
> - MLX5_ASSERT(mbuf == *pkts);
> - if (likely(n_free != 0)) {
> - if (unlikely(pool != mbuf->pool))
> - /* From different pool. */
> - break;
> - } else {
> - /* Start new scan array. */
> - pool = mbuf->pool;
> - p_free = pkts;
> - }
> - ++n_free;
> - ++pkts;
> - --pkts_n;
> - if (unlikely(pkts_n == 0)) {
> - mbuf = NULL;
> - break;
> - }
> - } else {
> - /*
> - * This happens if mbuf is still referenced.
> - * We can't put it back to the pool, skip.
> - */
> - ++pkts;
> - --pkts_n;
> - if (unlikely(n_free != 0))
> - /* There is some array to free.*/
> - break;
> - if (unlikely(pkts_n == 0))
> - /* Last mbuf, nothing to free. */
> - return;
> - }
> - }
> - for (;;) {
> - /*
> - * This loop is implemented to avoid multiple
> - * inlining of rte_mempool_put_bulk().
> - */
> - MLX5_ASSERT(pool);
> - MLX5_ASSERT(p_free);
> - MLX5_ASSERT(n_free);
> - /*
> - * Free the array of pre-freed mbufs
> - * belonging to the same memory pool.
> - */
> - rte_mempool_put_bulk(pool, (void *)p_free,
> n_free);
> - if (unlikely(mbuf != NULL)) {
> - /* There is the request to start new scan. */
> - pool = mbuf->pool;
> - p_free = pkts++;
> - n_free = 1;
> - --pkts_n;
> - if (likely(pkts_n != 0))
> - break;
> - /*
> - * This is the last mbuf to be freed.
> - * Do one more loop iteration to complete.
> - * This is rare case of the last unique mbuf.
> - */
> - mbuf = NULL;
> - continue;
> - }
> - if (likely(pkts_n == 0))
> - return;
> - n_free = 0;
> - break;
> - }
> - }
> -}
> -/*
> - * No inline version to free buffers for optimal call
> - * on the tx_burst completion.
> - */
> -static __rte_noinline void
> -__mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - unsigned int pkts_n,
> - unsigned int olx __rte_unused)
> -{
> - mlx5_tx_free_mbuf(txq, pkts, pkts_n, olx);
> -}
> -
> -/**
> - * Free the mbuf from the elts ring buffer till new tail.
> - *
> - * @param txq
> - * Pointer to Tx queue structure.
> - * @param tail
> - * Index in elts to free up to, becomes new elts tail.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_free_elts(struct mlx5_txq_data *__rte_restrict txq,
> - uint16_t tail,
> - unsigned int olx __rte_unused)
> -{
> - uint16_t n_elts = tail - txq->elts_tail;
> -
> - MLX5_ASSERT(n_elts);
> - MLX5_ASSERT(n_elts <= txq->elts_s);
> - /*
> - * Implement a loop to support ring buffer wraparound
> - * with single inlining of mlx5_tx_free_mbuf().
> - */
> - do {
> - unsigned int part;
> -
> - part = txq->elts_s - (txq->elts_tail & txq->elts_m);
> - part = RTE_MIN(part, n_elts);
> - MLX5_ASSERT(part);
> - MLX5_ASSERT(part <= txq->elts_s);
> - mlx5_tx_free_mbuf(txq,
> - &txq->elts[txq->elts_tail & txq->elts_m],
> - part, olx);
> - txq->elts_tail += part;
> - n_elts -= part;
> - } while (n_elts);
> -}
> -
> -/**
> - * Store the mbuf being sent into elts ring buffer.
> - * On Tx completion these mbufs will be freed.
> - *
> - * @param txq
> - * Pointer to Tx queue structure.
> - * @param pkts
> - * Pointer to array of packets to be stored.
> - * @param pkts_n
> - * Number of packets to be stored.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_copy_elts(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - unsigned int pkts_n,
> - unsigned int olx __rte_unused)
> -{
> - unsigned int part;
> - struct rte_mbuf **elts = (struct rte_mbuf **)txq->elts;
> -
> - MLX5_ASSERT(pkts);
> - MLX5_ASSERT(pkts_n);
> - part = txq->elts_s - (txq->elts_head & txq->elts_m);
> - MLX5_ASSERT(part);
> - MLX5_ASSERT(part <= txq->elts_s);
> - /* This code is a good candidate for vectorizing with SIMD. */
> - rte_memcpy((void *)(elts + (txq->elts_head & txq->elts_m)),
> - (void *)pkts,
> - RTE_MIN(part, pkts_n) * sizeof(struct rte_mbuf *));
> - txq->elts_head += pkts_n;
> - if (unlikely(part < pkts_n))
> - /* The copy is wrapping around the elts array. */
> - rte_memcpy((void *)elts, (void *)(pkts + part),
> - (pkts_n - part) * sizeof(struct rte_mbuf *));
> -}
> -
> -/**
> * Update completion queue consuming index via doorbell
> * and flush the completed data buffers.
> *
> @@ -970,7 +607,7 @@ enum mlx5_txcmp_code {
> * NOTE: not inlined intentionally, it makes tx_burst
> * routine smaller, simple and faster - from experiments.
> */
> -static void
> +void
> mlx5_tx_handle_completion(struct mlx5_txq_data *__rte_restrict txq,
> unsigned int olx __rte_unused)
> {
> @@ -1047,54 +684,6 @@ enum mlx5_txcmp_code {
> }
>
> /**
> - * Check if the completion request flag should be set in the last WQE.
> - * Both pushed mbufs and WQEs are monitored and the completion request
> - * flag is set if any of thresholds is reached.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_request_completion(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - uint16_t head = txq->elts_head;
> - unsigned int part;
> -
> - part = MLX5_TXOFF_CONFIG(INLINE) ?
> - 0 : loc->pkts_sent - loc->pkts_copy;
> - head += part;
> - if ((uint16_t)(head - txq->elts_comp) >= MLX5_TX_COMP_THRESH
> ||
> - (MLX5_TXOFF_CONFIG(INLINE) &&
> - (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
> - volatile struct mlx5_wqe *last = loc->wqe_last;
> -
> - MLX5_ASSERT(last);
> - txq->elts_comp = head;
> - if (MLX5_TXOFF_CONFIG(INLINE))
> - txq->wqe_comp = txq->wqe_ci;
> - /* Request unconditional completion on last WQE. */
> - last->cseg.flags = RTE_BE32(MLX5_COMP_ALWAYS <<
> - MLX5_COMP_MODE_OFFSET);
> - /* Save elts_head in dedicated free on completion queue. */
> -#ifdef RTE_LIBRTE_MLX5_DEBUG
> - txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head |
> - (last->cseg.opcode >> 8) << 16;
> -#else
> - txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head;
> -#endif
> - /* A CQE slot must always be available. */
> - MLX5_ASSERT((txq->cq_pi - txq->cq_ci) <= txq->cqe_s);
> - }
> -}
> -
> -/**
> * DPDK callback to check the status of a tx descriptor.
> *
> * @param tx_queue
> @@ -1118,2924 +707,6 @@ enum mlx5_txcmp_code {
> return RTE_ETH_TX_DESC_DONE;
> }
>
> -/**
> - * Build the Control Segment with specified opcode:
> - * - MLX5_OPCODE_SEND
> - * - MLX5_OPCODE_ENHANCED_MPSW
> - * - MLX5_OPCODE_TSO
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param wqe
> - * Pointer to WQE to fill with built Control Segment.
> - * @param ds
> - * Supposed length of WQE in segments.
> - * @param opcode
> - * SQ WQE opcode to put into Control Segment.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_cseg_init(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc __rte_unused,
> - struct mlx5_wqe *__rte_restrict wqe,
> - unsigned int ds,
> - unsigned int opcode,
> - unsigned int olx __rte_unused)
> -{
> - struct mlx5_wqe_cseg *__rte_restrict cs = &wqe->cseg;
> -
> - /* For legacy MPW replace the EMPW by TSO with modifier. */
> - if (MLX5_TXOFF_CONFIG(MPW) && opcode ==
> MLX5_OPCODE_ENHANCED_MPSW)
> - opcode = MLX5_OPCODE_TSO | MLX5_OPC_MOD_MPW <<
> 24;
> - cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
> - cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
> - cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
> - MLX5_COMP_MODE_OFFSET);
> - cs->misc = RTE_BE32(0);
> -}
> -
> -/**
> - * Build the Synchronize Queue Segment with specified completion index.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param wqe
> - * Pointer to WQE to fill with built Control Segment.
> - * @param wci
> - * Completion index in Clock Queue to wait.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_wseg_init(struct mlx5_txq_data *restrict txq,
> - struct mlx5_txq_local *restrict loc __rte_unused,
> - struct mlx5_wqe *restrict wqe,
> - unsigned int wci,
> - unsigned int olx __rte_unused)
> -{
> - struct mlx5_wqe_qseg *qs;
> -
> - qs = RTE_PTR_ADD(wqe, MLX5_WSEG_SIZE);
> - qs->max_index = rte_cpu_to_be_32(wci);
> - qs->qpn_cqn = rte_cpu_to_be_32(txq->sh-
> >txpp.clock_queue.cq_obj.cq->id);
> - qs->reserved0 = RTE_BE32(0);
> - qs->reserved1 = RTE_BE32(0);
> -}
> -
> -/**
> - * Build the Ethernet Segment without inlined data.
> - * Supports Software Parser, Checksums and VLAN
> - * insertion Tx offload features.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param wqe
> - * Pointer to WQE to fill with built Ethernet Segment.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_eseg_none(struct mlx5_txq_data *__rte_restrict txq
> __rte_unused,
> - struct mlx5_txq_local *__rte_restrict loc,
> - struct mlx5_wqe *__rte_restrict wqe,
> - unsigned int olx)
> -{
> - struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
> - uint32_t csum;
> -
> - /*
> - * Calculate and set check sum flags first, dword field
> - * in segment may be shared with Software Parser flags.
> - */
> - csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc-
> >mbuf) : 0;
> - es->flags = rte_cpu_to_le_32(csum);
> - /*
> - * Calculate and set Software Parser offsets and flags.
> - * These flags a set for custom UDP and IP tunnel packets.
> - */
> - es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
> - /* Fill metadata field if needed. */
> - es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
> - loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
> - *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
> - /* Engage VLAN tag insertion feature if requested. */
> - if (MLX5_TXOFF_CONFIG(VLAN) &&
> - loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
> - /*
> - * We should get here only if device support
> - * this feature correctly.
> - */
> - MLX5_ASSERT(txq->vlan_en);
> - es->inline_hdr =
> rte_cpu_to_be_32(MLX5_ETH_WQE_VLAN_INSERT |
> - loc->mbuf->vlan_tci);
> - } else {
> - es->inline_hdr = RTE_BE32(0);
> - }
> -}
> -
> -/**
> - * Build the Ethernet Segment with minimal inlined data
> - * of MLX5_ESEG_MIN_INLINE_SIZE bytes length. This is
> - * used to fill the gap in single WQEBB WQEs.
> - * Supports Software Parser, Checksums and VLAN
> - * insertion Tx offload features.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param wqe
> - * Pointer to WQE to fill with built Ethernet Segment.
> - * @param vlan
> - * Length of VLAN tag insertion if any.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_eseg_dmin(struct mlx5_txq_data *__rte_restrict txq
> __rte_unused,
> - struct mlx5_txq_local *__rte_restrict loc,
> - struct mlx5_wqe *__rte_restrict wqe,
> - unsigned int vlan,
> - unsigned int olx)
> -{
> - struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
> - uint32_t csum;
> - uint8_t *psrc, *pdst;
> -
> - /*
> - * Calculate and set check sum flags first, dword field
> - * in segment may be shared with Software Parser flags.
> - */
> - csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc-
> >mbuf) : 0;
> - es->flags = rte_cpu_to_le_32(csum);
> - /*
> - * Calculate and set Software Parser offsets and flags.
> - * These flags a set for custom UDP and IP tunnel packets.
> - */
> - es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
> - /* Fill metadata field if needed. */
> - es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
> - loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
> - *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
> - psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
> - es->inline_hdr_sz = RTE_BE16(MLX5_ESEG_MIN_INLINE_SIZE);
> - es->inline_data = *(unaligned_uint16_t *)psrc;
> - psrc += sizeof(uint16_t);
> - pdst = (uint8_t *)(es + 1);
> - if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
> - /* Implement VLAN tag insertion as part inline data. */
> - memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN -
> sizeof(uint16_t));
> - pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
> - psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
> - /* Insert VLAN ethertype + VLAN tag. */
> - *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
> - ((RTE_ETHER_TYPE_VLAN <<
> 16) |
> - loc->mbuf->vlan_tci);
> - pdst += sizeof(struct rte_vlan_hdr);
> - /* Copy the rest two bytes from packet data. */
> - MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst,
> sizeof(uint16_t)));
> - *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
> - } else {
> - /* Fill the gap in the title WQEBB with inline data. */
> - rte_mov16(pdst, psrc);
> - }
> -}
> -
> -/**
> - * Build the Ethernet Segment with entire packet
> - * data inlining. Checks the boundary of WQEBB and
> - * ring buffer wrapping, supports Software Parser,
> - * Checksums and VLAN insertion Tx offload features.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param wqe
> - * Pointer to WQE to fill with built Ethernet Segment.
> - * @param vlan
> - * Length of VLAN tag insertion if any.
> - * @param inlen
> - * Length of data to inline (VLAN included, if any).
> - * @param tso
> - * TSO flag, set mss field from the packet.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * Pointer to the next Data Segment (aligned and wrapped around).
> - */
> -static __rte_always_inline struct mlx5_wqe_dseg *
> -mlx5_tx_eseg_data(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - struct mlx5_wqe *__rte_restrict wqe,
> - unsigned int vlan,
> - unsigned int inlen,
> - unsigned int tso,
> - unsigned int olx)
> -{
> - struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
> - uint32_t csum;
> - uint8_t *psrc, *pdst;
> - unsigned int part;
> -
> - /*
> - * Calculate and set check sum flags first, dword field
> - * in segment may be shared with Software Parser flags.
> - */
> - csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc-
> >mbuf) : 0;
> - if (tso) {
> - csum <<= 24;
> - csum |= loc->mbuf->tso_segsz;
> - es->flags = rte_cpu_to_be_32(csum);
> - } else {
> - es->flags = rte_cpu_to_le_32(csum);
> - }
> - /*
> - * Calculate and set Software Parser offsets and flags.
> - * These flags a set for custom UDP and IP tunnel packets.
> - */
> - es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
> - /* Fill metadata field if needed. */
> - es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
> - loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
> - *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
> - psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
> - es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
> - es->inline_data = *(unaligned_uint16_t *)psrc;
> - psrc += sizeof(uint16_t);
> - pdst = (uint8_t *)(es + 1);
> - if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
> - /* Implement VLAN tag insertion as part inline data. */
> - memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN -
> sizeof(uint16_t));
> - pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
> - psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
> - /* Insert VLAN ethertype + VLAN tag. */
> - *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
> - ((RTE_ETHER_TYPE_VLAN <<
> 16) |
> - loc->mbuf->vlan_tci);
> - pdst += sizeof(struct rte_vlan_hdr);
> - /* Copy the rest two bytes from packet data. */
> - MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst,
> sizeof(uint16_t)));
> - *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
> - psrc += sizeof(uint16_t);
> - } else {
> - /* Fill the gap in the title WQEBB with inline data. */
> - rte_mov16(pdst, psrc);
> - psrc += sizeof(rte_v128u32_t);
> - }
> - pdst = (uint8_t *)(es + 2);
> - MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
> - MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
> - inlen -= MLX5_ESEG_MIN_INLINE_SIZE;
> - if (!inlen) {
> - MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst,
> MLX5_WSEG_SIZE));
> - return (struct mlx5_wqe_dseg *)pdst;
> - }
> - /*
> - * The WQEBB space availability is checked by caller.
> - * Here we should be aware of WQE ring buffer wraparound only.
> - */
> - part = (uint8_t *)txq->wqes_end - pdst;
> - part = RTE_MIN(part, inlen);
> - do {
> - rte_memcpy(pdst, psrc, part);
> - inlen -= part;
> - if (likely(!inlen)) {
> - /*
> - * If return value is not used by the caller
> - * the code below will be optimized out.
> - */
> - pdst += part;
> - pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
> - if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
> - pdst = (uint8_t *)txq->wqes;
> - return (struct mlx5_wqe_dseg *)pdst;
> - }
> - pdst = (uint8_t *)txq->wqes;
> - psrc += part;
> - part = inlen;
> - } while (true);
> -}
> -
> -/**
> - * Copy data from chain of mbuf to the specified linear buffer.
> - * Checksums and VLAN insertion Tx offload features. If data
> - * from some mbuf copied completely this mbuf is freed. Local
> - * structure is used to keep the byte stream state.
> - *
> - * @param pdst
> - * Pointer to the destination linear buffer.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param len
> - * Length of data to be copied.
> - * @param must
> - * Length of data to be copied ignoring no inline hint.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * Number of actual copied data bytes. This is always greater than or
> - * equal to must parameter and might be lesser than len in no inline
> - * hint flag is encountered.
> - */
> -static __rte_always_inline unsigned int
> -mlx5_tx_mseg_memcpy(uint8_t *pdst,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int len,
> - unsigned int must,
> - unsigned int olx __rte_unused)
> -{
> - struct rte_mbuf *mbuf;
> - unsigned int part, dlen, copy = 0;
> - uint8_t *psrc;
> -
> - MLX5_ASSERT(len);
> - MLX5_ASSERT(must <= len);
> - do {
> - /* Allow zero length packets, must check first. */
> - dlen = rte_pktmbuf_data_len(loc->mbuf);
> - if (dlen <= loc->mbuf_off) {
> - /* Exhausted packet, just free. */
> - mbuf = loc->mbuf;
> - loc->mbuf = mbuf->next;
> - rte_pktmbuf_free_seg(mbuf);
> - loc->mbuf_off = 0;
> - MLX5_ASSERT(loc->mbuf_nseg > 1);
> - MLX5_ASSERT(loc->mbuf);
> - --loc->mbuf_nseg;
> - if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
> - unsigned int diff;
> -
> - if (copy >= must) {
> - /*
> - * We already copied the minimal
> - * requested amount of data.
> - */
> - return copy;
> - }
> - diff = must - copy;
> - if (diff <= rte_pktmbuf_data_len(loc->mbuf))
> {
> - /*
> - * Copy only the minimal required
> - * part of the data buffer.
> - */
> - len = diff;
> - }
> - }
> - continue;
> - }
> - dlen -= loc->mbuf_off;
> - psrc = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
> - loc->mbuf_off);
> - part = RTE_MIN(len, dlen);
> - rte_memcpy(pdst, psrc, part);
> - copy += part;
> - loc->mbuf_off += part;
> - len -= part;
> - if (!len) {
> - if (loc->mbuf_off >= rte_pktmbuf_data_len(loc-
> >mbuf)) {
> - loc->mbuf_off = 0;
> - /* Exhausted packet, just free. */
> - mbuf = loc->mbuf;
> - loc->mbuf = mbuf->next;
> - rte_pktmbuf_free_seg(mbuf);
> - loc->mbuf_off = 0;
> - MLX5_ASSERT(loc->mbuf_nseg >= 1);
> - --loc->mbuf_nseg;
> - }
> - return copy;
> - }
> - pdst += part;
> - } while (true);
> -}
> -
> -/**
> - * Build the Ethernet Segment with inlined data from
> - * multi-segment packet. Checks the boundary of WQEBB
> - * and ring buffer wrapping, supports Software Parser,
> - * Checksums and VLAN insertion Tx offload features.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param wqe
> - * Pointer to WQE to fill with built Ethernet Segment.
> - * @param vlan
> - * Length of VLAN tag insertion if any.
> - * @param inlen
> - * Length of data to inline (VLAN included, if any).
> - * @param tso
> - * TSO flag, set mss field from the packet.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * Pointer to the next Data Segment (aligned and
> - * possible NOT wrapped around - caller should do
> - * wrapping check on its own).
> - */
> -static __rte_always_inline struct mlx5_wqe_dseg *
> -mlx5_tx_eseg_mdat(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - struct mlx5_wqe *__rte_restrict wqe,
> - unsigned int vlan,
> - unsigned int inlen,
> - unsigned int tso,
> - unsigned int olx)
> -{
> - struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
> - uint32_t csum;
> - uint8_t *pdst;
> - unsigned int part, tlen = 0;
> -
> - /*
> - * Calculate and set check sum flags first, uint32_t field
> - * in segment may be shared with Software Parser flags.
> - */
> - csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc-
> >mbuf) : 0;
> - if (tso) {
> - csum <<= 24;
> - csum |= loc->mbuf->tso_segsz;
> - es->flags = rte_cpu_to_be_32(csum);
> - } else {
> - es->flags = rte_cpu_to_le_32(csum);
> - }
> - /*
> - * Calculate and set Software Parser offsets and flags.
> - * These flags a set for custom UDP and IP tunnel packets.
> - */
> - es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
> - /* Fill metadata field if needed. */
> - es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
> - loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
> - *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
> - MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
> - pdst = (uint8_t *)&es->inline_data;
> - if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
> - /* Implement VLAN tag insertion as part inline data. */
> - mlx5_tx_mseg_memcpy(pdst, loc,
> - 2 * RTE_ETHER_ADDR_LEN,
> - 2 * RTE_ETHER_ADDR_LEN, olx);
> - pdst += 2 * RTE_ETHER_ADDR_LEN;
> - *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
> - ((RTE_ETHER_TYPE_VLAN <<
> 16) |
> - loc->mbuf->vlan_tci);
> - pdst += sizeof(struct rte_vlan_hdr);
> - tlen += 2 * RTE_ETHER_ADDR_LEN + sizeof(struct
> rte_vlan_hdr);
> - }
> - MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
> - /*
> - * The WQEBB space availability is checked by caller.
> - * Here we should be aware of WQE ring buffer wraparound only.
> - */
> - part = (uint8_t *)txq->wqes_end - pdst;
> - part = RTE_MIN(part, inlen - tlen);
> - MLX5_ASSERT(part);
> - do {
> - unsigned int copy;
> -
> - /*
> - * Copying may be interrupted inside the routine
> - * if run into no inline hint flag.
> - */
> - copy = tlen >= txq->inlen_mode ? 0 : (txq->inlen_mode -
> tlen);
> - copy = mlx5_tx_mseg_memcpy(pdst, loc, part, copy, olx);
> - tlen += copy;
> - if (likely(inlen <= tlen) || copy < part) {
> - es->inline_hdr_sz = rte_cpu_to_be_16(tlen);
> - pdst += copy;
> - pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
> - return (struct mlx5_wqe_dseg *)pdst;
> - }
> - pdst = (uint8_t *)txq->wqes;
> - part = inlen - tlen;
> - } while (true);
> -}
> -
> -/**
> - * Build the Data Segment of pointer type.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param dseg
> - * Pointer to WQE to fill with built Data Segment.
> - * @param buf
> - * Data buffer to point.
> - * @param len
> - * Data buffer length.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_dseg_ptr(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - struct mlx5_wqe_dseg *__rte_restrict dseg,
> - uint8_t *buf,
> - unsigned int len,
> - unsigned int olx __rte_unused)
> -
> -{
> - MLX5_ASSERT(len);
> - dseg->bcount = rte_cpu_to_be_32(len);
> - dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
> - dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
> -}
> -
> -/**
> - * Build the Data Segment of pointer type or inline
> - * if data length is less than buffer in minimal
> - * Data Segment size.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param dseg
> - * Pointer to WQE to fill with built Data Segment.
> - * @param buf
> - * Data buffer to point.
> - * @param len
> - * Data buffer length.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - */
> -static __rte_always_inline void
> -mlx5_tx_dseg_iptr(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - struct mlx5_wqe_dseg *__rte_restrict dseg,
> - uint8_t *buf,
> - unsigned int len,
> - unsigned int olx __rte_unused)
> -
> -{
> - uintptr_t dst, src;
> -
> - MLX5_ASSERT(len);
> - if (len > MLX5_DSEG_MIN_INLINE_SIZE) {
> - dseg->bcount = rte_cpu_to_be_32(len);
> - dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
> - dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
> -
> - return;
> - }
> - dseg->bcount = rte_cpu_to_be_32(len |
> MLX5_ETH_WQE_DATA_INLINE);
> - /* Unrolled implementation of generic rte_memcpy. */
> - dst = (uintptr_t)&dseg->inline_data[0];
> - src = (uintptr_t)buf;
> - if (len & 0x08) {
> -#ifdef RTE_ARCH_STRICT_ALIGN
> - MLX5_ASSERT(dst == RTE_PTR_ALIGN(dst,
> sizeof(uint32_t)));
> - *(uint32_t *)dst = *(unaligned_uint32_t *)src;
> - dst += sizeof(uint32_t);
> - src += sizeof(uint32_t);
> - *(uint32_t *)dst = *(unaligned_uint32_t *)src;
> - dst += sizeof(uint32_t);
> - src += sizeof(uint32_t);
> -#else
> - *(uint64_t *)dst = *(unaligned_uint64_t *)src;
> - dst += sizeof(uint64_t);
> - src += sizeof(uint64_t);
> -#endif
> - }
> - if (len & 0x04) {
> - *(uint32_t *)dst = *(unaligned_uint32_t *)src;
> - dst += sizeof(uint32_t);
> - src += sizeof(uint32_t);
> - }
> - if (len & 0x02) {
> - *(uint16_t *)dst = *(unaligned_uint16_t *)src;
> - dst += sizeof(uint16_t);
> - src += sizeof(uint16_t);
> - }
> - if (len & 0x01)
> - *(uint8_t *)dst = *(uint8_t *)src;
> -}
> -
> -/**
> - * Build the Data Segment of inlined data from single
> - * segment packet, no VLAN insertion.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param dseg
> - * Pointer to WQE to fill with built Data Segment.
> - * @param buf
> - * Data buffer to point.
> - * @param len
> - * Data buffer length.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * Pointer to the next Data Segment after inlined data.
> - * Ring buffer wraparound check is needed. We do not
> - * do it here because it may not be needed for the
> - * last packet in the eMPW session.
> - */
> -static __rte_always_inline struct mlx5_wqe_dseg *
> -mlx5_tx_dseg_empw(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc __rte_unused,
> - struct mlx5_wqe_dseg *__rte_restrict dseg,
> - uint8_t *buf,
> - unsigned int len,
> - unsigned int olx __rte_unused)
> -{
> - unsigned int part;
> - uint8_t *pdst;
> -
> - if (!MLX5_TXOFF_CONFIG(MPW)) {
> - /* Store the descriptor byte counter for eMPW sessions. */
> - dseg->bcount = rte_cpu_to_be_32(len |
> MLX5_ETH_WQE_DATA_INLINE);
> - pdst = &dseg->inline_data[0];
> - } else {
> - /* The entire legacy MPW session counter is stored on close.
> */
> - pdst = (uint8_t *)dseg;
> - }
> - /*
> - * The WQEBB space availability is checked by caller.
> - * Here we should be aware of WQE ring buffer wraparound only.
> - */
> - part = (uint8_t *)txq->wqes_end - pdst;
> - part = RTE_MIN(part, len);
> - do {
> - rte_memcpy(pdst, buf, part);
> - len -= part;
> - if (likely(!len)) {
> - pdst += part;
> - if (!MLX5_TXOFF_CONFIG(MPW))
> - pdst = RTE_PTR_ALIGN(pdst,
> MLX5_WSEG_SIZE);
> - /* Note: no final wraparound check here. */
> - return (struct mlx5_wqe_dseg *)pdst;
> - }
> - pdst = (uint8_t *)txq->wqes;
> - buf += part;
> - part = len;
> - } while (true);
> -}
> -
> -/**
> - * Build the Data Segment of inlined data from single
> - * segment packet with VLAN insertion.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param dseg
> - * Pointer to the dseg fill with built Data Segment.
> - * @param buf
> - * Data buffer to point.
> - * @param len
> - * Data buffer length.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * Pointer to the next Data Segment after inlined data.
> - * Ring buffer wraparound check is needed.
> - */
> -static __rte_always_inline struct mlx5_wqe_dseg *
> -mlx5_tx_dseg_vlan(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc __rte_unused,
> - struct mlx5_wqe_dseg *__rte_restrict dseg,
> - uint8_t *buf,
> - unsigned int len,
> - unsigned int olx __rte_unused)
> -
> -{
> - unsigned int part;
> - uint8_t *pdst;
> -
> - MLX5_ASSERT(len > MLX5_ESEG_MIN_INLINE_SIZE);
> - if (!MLX5_TXOFF_CONFIG(MPW)) {
> - /* Store the descriptor byte counter for eMPW sessions. */
> - dseg->bcount = rte_cpu_to_be_32
> - ((len + sizeof(struct rte_vlan_hdr)) |
> - MLX5_ETH_WQE_DATA_INLINE);
> - pdst = &dseg->inline_data[0];
> - } else {
> - /* The entire legacy MPW session counter is stored on close.
> */
> - pdst = (uint8_t *)dseg;
> - }
> - memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
> - buf += MLX5_DSEG_MIN_INLINE_SIZE;
> - pdst += MLX5_DSEG_MIN_INLINE_SIZE;
> - len -= MLX5_DSEG_MIN_INLINE_SIZE;
> - /* Insert VLAN ethertype + VLAN tag. Pointer is aligned. */
> - MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
> - if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
> - pdst = (uint8_t *)txq->wqes;
> - *(uint32_t *)pdst = rte_cpu_to_be_32((RTE_ETHER_TYPE_VLAN <<
> 16) |
> - loc->mbuf->vlan_tci);
> - pdst += sizeof(struct rte_vlan_hdr);
> - /*
> - * The WQEBB space availability is checked by caller.
> - * Here we should be aware of WQE ring buffer wraparound only.
> - */
> - part = (uint8_t *)txq->wqes_end - pdst;
> - part = RTE_MIN(part, len);
> - do {
> - rte_memcpy(pdst, buf, part);
> - len -= part;
> - if (likely(!len)) {
> - pdst += part;
> - if (!MLX5_TXOFF_CONFIG(MPW))
> - pdst = RTE_PTR_ALIGN(pdst,
> MLX5_WSEG_SIZE);
> - /* Note: no final wraparound check here. */
> - return (struct mlx5_wqe_dseg *)pdst;
> - }
> - pdst = (uint8_t *)txq->wqes;
> - buf += part;
> - part = len;
> - } while (true);
> -}
> -
> -/**
> - * Build the Ethernet Segment with optionally inlined data with
> - * VLAN insertion and following Data Segments (if any) from
> - * multi-segment packet. Used by ordinary send and TSO.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param wqe
> - * Pointer to WQE to fill with built Ethernet/Data Segments.
> - * @param vlan
> - * Length of VLAN header to insert, 0 means no VLAN insertion.
> - * @param inlen
> - * Data length to inline. For TSO this parameter specifies
> - * exact value, for ordinary send routine can be aligned by
> - * caller to provide better WQE space saving and data buffer
> - * start address alignment. This length includes VLAN header
> - * being inserted.
> - * @param tso
> - * Zero means ordinary send, inlined data can be extended,
> - * otherwise this is TSO, inlined data length is fixed.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * Actual size of built WQE in segments.
> - */
> -static __rte_always_inline unsigned int
> -mlx5_tx_mseg_build(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - struct mlx5_wqe *__rte_restrict wqe,
> - unsigned int vlan,
> - unsigned int inlen,
> - unsigned int tso,
> - unsigned int olx __rte_unused)
> -{
> - struct mlx5_wqe_dseg *__rte_restrict dseg;
> - unsigned int ds;
> -
> - MLX5_ASSERT((rte_pktmbuf_pkt_len(loc->mbuf) + vlan) >= inlen);
> - loc->mbuf_nseg = NB_SEGS(loc->mbuf);
> - loc->mbuf_off = 0;
> -
> - dseg = mlx5_tx_eseg_mdat(txq, loc, wqe, vlan, inlen, tso, olx);
> - if (!loc->mbuf_nseg)
> - goto dseg_done;
> - /*
> - * There are still some mbuf remaining, not inlined.
> - * The first mbuf may be partially inlined and we
> - * must process the possible non-zero data offset.
> - */
> - if (loc->mbuf_off) {
> - unsigned int dlen;
> - uint8_t *dptr;
> -
> - /*
> - * Exhausted packets must be dropped before.
> - * Non-zero offset means there are some data
> - * remained in the packet.
> - */
> - MLX5_ASSERT(loc->mbuf_off < rte_pktmbuf_data_len(loc-
> >mbuf));
> - MLX5_ASSERT(rte_pktmbuf_data_len(loc->mbuf));
> - dptr = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
> - loc->mbuf_off);
> - dlen = rte_pktmbuf_data_len(loc->mbuf) - loc->mbuf_off;
> - /*
> - * Build the pointer/minimal data Data Segment.
> - * Do ring buffer wrapping check in advance.
> - */
> - if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> - dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> - mlx5_tx_dseg_iptr(txq, loc, dseg, dptr, dlen, olx);
> - /* Store the mbuf to be freed on completion. */
> - MLX5_ASSERT(loc->elts_free);
> - txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
> - --loc->elts_free;
> - ++dseg;
> - if (--loc->mbuf_nseg == 0)
> - goto dseg_done;
> - loc->mbuf = loc->mbuf->next;
> - loc->mbuf_off = 0;
> - }
> - do {
> - if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
> - struct rte_mbuf *mbuf;
> -
> - /* Zero length segment found, just skip. */
> - mbuf = loc->mbuf;
> - loc->mbuf = loc->mbuf->next;
> - rte_pktmbuf_free_seg(mbuf);
> - if (--loc->mbuf_nseg == 0)
> - break;
> - } else {
> - if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> - dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> - mlx5_tx_dseg_iptr
> - (txq, loc, dseg,
> - rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
> - rte_pktmbuf_data_len(loc->mbuf), olx);
> - MLX5_ASSERT(loc->elts_free);
> - txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> - --loc->elts_free;
> - ++dseg;
> - if (--loc->mbuf_nseg == 0)
> - break;
> - loc->mbuf = loc->mbuf->next;
> - }
> - } while (true);
> -
> -dseg_done:
> - /* Calculate actual segments used from the dseg pointer. */
> - if ((uintptr_t)wqe < (uintptr_t)dseg)
> - ds = ((uintptr_t)dseg - (uintptr_t)wqe) / MLX5_WSEG_SIZE;
> - else
> - ds = (((uintptr_t)dseg - (uintptr_t)wqe) +
> - txq->wqe_s * MLX5_WQE_SIZE) / MLX5_WSEG_SIZE;
> - return ds;
> -}
> -
> -/**
> - * The routine checks timestamp flag in the current packet,
> - * and push WAIT WQE into the queue if scheduling is required.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> - * MLX5_TXCMP_CODE_SINGLE - continue processing with the packet.
> - * MLX5_TXCMP_CODE_MULTI - the WAIT inserted, continue processing.
> - * Local context variables partially updated.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_schedule_send(struct mlx5_txq_data *restrict txq,
> - struct mlx5_txq_local *restrict loc,
> - unsigned int olx)
> -{
> - if (MLX5_TXOFF_CONFIG(TXPP) &&
> - loc->mbuf->ol_flags & txq->ts_mask) {
> - struct mlx5_wqe *wqe;
> - uint64_t ts;
> - int32_t wci;
> -
> - /*
> - * Estimate the required space quickly and roughly.
> - * We would like to ensure the packet can be pushed
> - * to the queue and we won't get the orphan WAIT WQE.
> - */
> - if (loc->wqe_free <= MLX5_WQE_SIZE_MAX /
> MLX5_WQE_SIZE ||
> - loc->elts_free < NB_SEGS(loc->mbuf))
> - return MLX5_TXCMP_CODE_EXIT;
> - /* Convert the timestamp into completion to wait. */
> - ts = *RTE_MBUF_DYNFIELD(loc->mbuf, txq->ts_offset,
> uint64_t *);
> - wci = mlx5_txpp_convert_tx_ts(txq->sh, ts);
> - if (unlikely(wci < 0))
> - return MLX5_TXCMP_CODE_SINGLE;
> - /* Build the WAIT WQE with specified completion. */
> - wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> - mlx5_tx_cseg_init(txq, loc, wqe, 2, MLX5_OPCODE_WAIT,
> olx);
> - mlx5_tx_wseg_init(txq, loc, wqe, wci, olx);
> - ++txq->wqe_ci;
> - --loc->wqe_free;
> - return MLX5_TXCMP_CODE_MULTI;
> - }
> - return MLX5_TXCMP_CODE_SINGLE;
> -}
> -
> -/**
> - * Tx one packet function for multi-segment TSO. Supports all
> - * types of Tx offloads, uses MLX5_OPCODE_TSO to build WQEs,
> - * sends one packet per WQE.
> - *
> - * This routine is responsible for storing processed mbuf
> - * into elts ring buffer and update elts_head.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> - * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> - * Local context variables partially updated.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_packet_multi_tso(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - struct mlx5_wqe *__rte_restrict wqe;
> - unsigned int ds, dlen, inlen, ntcp, vlan = 0;
> -
> - if (MLX5_TXOFF_CONFIG(TXPP)) {
> - enum mlx5_txcmp_code wret;
> -
> - /* Generate WAIT for scheduling if requested. */
> - wret = mlx5_tx_schedule_send(txq, loc, olx);
> - if (wret == MLX5_TXCMP_CODE_EXIT)
> - return MLX5_TXCMP_CODE_EXIT;
> - if (wret == MLX5_TXCMP_CODE_ERROR)
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - /*
> - * Calculate data length to be inlined to estimate
> - * the required space in WQE ring buffer.
> - */
> - dlen = rte_pktmbuf_pkt_len(loc->mbuf);
> - if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags &
> PKT_TX_VLAN_PKT)
> - vlan = sizeof(struct rte_vlan_hdr);
> - inlen = loc->mbuf->l2_len + vlan +
> - loc->mbuf->l3_len + loc->mbuf->l4_len;
> - if (unlikely((!inlen || !loc->mbuf->tso_segsz)))
> - return MLX5_TXCMP_CODE_ERROR;
> - if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
> - inlen += loc->mbuf->outer_l2_len + loc->mbuf-
> >outer_l3_len;
> - /* Packet must contain all TSO headers. */
> - if (unlikely(inlen > MLX5_MAX_TSO_HEADER ||
> - inlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
> - inlen > (dlen + vlan)))
> - return MLX5_TXCMP_CODE_ERROR;
> - MLX5_ASSERT(inlen >= txq->inlen_mode);
> - /*
> - * Check whether there are enough free WQEBBs:
> - * - Control Segment
> - * - Ethernet Segment
> - * - First Segment of inlined Ethernet data
> - * - ... data continued ...
> - * - Data Segments of pointer/min inline type
> - */
> - ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
> - MLX5_ESEG_MIN_INLINE_SIZE +
> - MLX5_WSEG_SIZE +
> - MLX5_WSEG_SIZE - 1) /
> MLX5_WSEG_SIZE;
> - if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
> - return MLX5_TXCMP_CODE_EXIT;
> - /* Check for maximal WQE size. */
> - if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) /
> 4)))
> - return MLX5_TXCMP_CODE_ERROR;
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes/packets counters. */
> - ntcp = (dlen - (inlen - vlan) + loc->mbuf->tso_segsz - 1) /
> - loc->mbuf->tso_segsz;
> - /*
> - * One will be added for mbuf itself
> - * at the end of the mlx5_tx_burst from
> - * loc->pkts_sent field.
> - */
> - --ntcp;
> - txq->stats.opackets += ntcp;
> - txq->stats.obytes += dlen + vlan + ntcp * inlen;
> -#endif
> - wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> - loc->wqe_last = wqe;
> - mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_TSO, olx);
> - ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 1, olx);
> - wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
> - txq->wqe_ci += (ds + 3) / 4;
> - loc->wqe_free -= (ds + 3) / 4;
> - return MLX5_TXCMP_CODE_MULTI;
> -}
> -
> -/**
> - * Tx one packet function for multi-segment SEND. Supports all
> - * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
> - * sends one packet per WQE, without any data inlining in
> - * Ethernet Segment.
> - *
> - * This routine is responsible for storing processed mbuf
> - * into elts ring buffer and update elts_head.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> - * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> - * Local context variables partially updated.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_packet_multi_send(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - struct mlx5_wqe_dseg *__rte_restrict dseg;
> - struct mlx5_wqe *__rte_restrict wqe;
> - unsigned int ds, nseg;
> -
> - MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
> - if (MLX5_TXOFF_CONFIG(TXPP)) {
> - enum mlx5_txcmp_code wret;
> -
> - /* Generate WAIT for scheduling if requested. */
> - wret = mlx5_tx_schedule_send(txq, loc, olx);
> - if (wret == MLX5_TXCMP_CODE_EXIT)
> - return MLX5_TXCMP_CODE_EXIT;
> - if (wret == MLX5_TXCMP_CODE_ERROR)
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - /*
> - * No inline at all, it means the CPU cycles saving
> - * is prioritized at configuration, we should not
> - * copy any packet data to WQE.
> - */
> - nseg = NB_SEGS(loc->mbuf);
> - ds = 2 + nseg;
> - if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
> - return MLX5_TXCMP_CODE_EXIT;
> - /* Check for maximal WQE size. */
> - if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) /
> 4)))
> - return MLX5_TXCMP_CODE_ERROR;
> - /*
> - * Some Tx offloads may cause an error if
> - * packet is not long enough, check against
> - * assumed minimal length.
> - */
> - if (rte_pktmbuf_pkt_len(loc->mbuf) <=
> MLX5_ESEG_MIN_INLINE_SIZE)
> - return MLX5_TXCMP_CODE_ERROR;
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes counter. */
> - txq->stats.obytes += rte_pktmbuf_pkt_len(loc->mbuf);
> - if (MLX5_TXOFF_CONFIG(VLAN) &&
> - loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
> - txq->stats.obytes += sizeof(struct rte_vlan_hdr);
> -#endif
> - /*
> - * SEND WQE, one WQEBB:
> - * - Control Segment, SEND opcode
> - * - Ethernet Segment, optional VLAN, no inline
> - * - Data Segments, pointer only type
> - */
> - wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> - loc->wqe_last = wqe;
> - mlx5_tx_cseg_init(txq, loc, wqe, ds, MLX5_OPCODE_SEND, olx);
> - mlx5_tx_eseg_none(txq, loc, wqe, olx);
> - dseg = &wqe->dseg[0];
> - do {
> - if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
> - struct rte_mbuf *mbuf;
> -
> - /*
> - * Zero length segment found, have to
> - * correct total size of WQE in segments.
> - * It is supposed to be rare occasion, so
> - * in normal case (no zero length segments)
> - * we avoid extra writing to the Control
> - * Segment.
> - */
> - --ds;
> - wqe->cseg.sq_ds -= RTE_BE32(1);
> - mbuf = loc->mbuf;
> - loc->mbuf = mbuf->next;
> - rte_pktmbuf_free_seg(mbuf);
> - if (--nseg == 0)
> - break;
> - } else {
> - mlx5_tx_dseg_ptr
> - (txq, loc, dseg,
> - rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
> - rte_pktmbuf_data_len(loc->mbuf), olx);
> - txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> - --loc->elts_free;
> - if (--nseg == 0)
> - break;
> - ++dseg;
> - if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> - dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> - loc->mbuf = loc->mbuf->next;
> - }
> - } while (true);
> - txq->wqe_ci += (ds + 3) / 4;
> - loc->wqe_free -= (ds + 3) / 4;
> - return MLX5_TXCMP_CODE_MULTI;
> -}
> -
> -/**
> - * Tx one packet function for multi-segment SEND. Supports all
> - * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
> - * sends one packet per WQE, with data inlining in
> - * Ethernet Segment and minimal Data Segments.
> - *
> - * This routine is responsible for storing processed mbuf
> - * into elts ring buffer and update elts_head.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> - * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> - * Local context variables partially updated.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_packet_multi_inline(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - struct mlx5_wqe *__rte_restrict wqe;
> - unsigned int ds, inlen, dlen, vlan = 0;
> -
> - MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> - MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
> - if (MLX5_TXOFF_CONFIG(TXPP)) {
> - enum mlx5_txcmp_code wret;
> -
> - /* Generate WAIT for scheduling if requested. */
> - wret = mlx5_tx_schedule_send(txq, loc, olx);
> - if (wret == MLX5_TXCMP_CODE_EXIT)
> - return MLX5_TXCMP_CODE_EXIT;
> - if (wret == MLX5_TXCMP_CODE_ERROR)
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - /*
> - * First calculate data length to be inlined
> - * to estimate the required space for WQE.
> - */
> - dlen = rte_pktmbuf_pkt_len(loc->mbuf);
> - if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags &
> PKT_TX_VLAN_PKT)
> - vlan = sizeof(struct rte_vlan_hdr);
> - inlen = dlen + vlan;
> - /* Check against minimal length. */
> - if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
> - return MLX5_TXCMP_CODE_ERROR;
> - MLX5_ASSERT(txq->inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
> - if (inlen > txq->inlen_send ||
> - loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
> - struct rte_mbuf *mbuf;
> - unsigned int nxlen;
> - uintptr_t start;
> -
> - /*
> - * Packet length exceeds the allowed inline
> - * data length, check whether the minimal
> - * inlining is required.
> - */
> - if (txq->inlen_mode) {
> - MLX5_ASSERT(txq->inlen_mode >=
> - MLX5_ESEG_MIN_INLINE_SIZE);
> - MLX5_ASSERT(txq->inlen_mode <= txq-
> >inlen_send);
> - inlen = txq->inlen_mode;
> - } else {
> - if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE
> ||
> - !vlan || txq->vlan_en) {
> - /*
> - * VLAN insertion will be done inside by HW.
> - * It is not utmost effective - VLAN flag is
> - * checked twice, but we should proceed the
> - * inlining length correctly and take into
> - * account the VLAN header being inserted.
> - */
> - return mlx5_tx_packet_multi_send
> - (txq, loc, olx);
> - }
> - inlen = MLX5_ESEG_MIN_INLINE_SIZE;
> - }
> - /*
> - * Now we know the minimal amount of data is requested
> - * to inline. Check whether we should inline the buffers
> - * from the chain beginning to eliminate some mbufs.
> - */
> - mbuf = loc->mbuf;
> - nxlen = rte_pktmbuf_data_len(mbuf);
> - if (unlikely(nxlen <= txq->inlen_send)) {
> - /* We can inline first mbuf at least. */
> - if (nxlen < inlen) {
> - unsigned int smlen;
> -
> - /* Scan mbufs till inlen filled. */
> - do {
> - smlen = nxlen;
> - mbuf = NEXT(mbuf);
> - MLX5_ASSERT(mbuf);
> - nxlen =
> rte_pktmbuf_data_len(mbuf);
> - nxlen += smlen;
> - } while (unlikely(nxlen < inlen));
> - if (unlikely(nxlen > txq->inlen_send)) {
> - /* We cannot inline entire mbuf. */
> - smlen = inlen - smlen;
> - start = rte_pktmbuf_mtod_offset
> - (mbuf, uintptr_t, smlen);
> - goto do_align;
> - }
> - }
> - do {
> - inlen = nxlen;
> - mbuf = NEXT(mbuf);
> - /* There should be not end of packet. */
> - MLX5_ASSERT(mbuf);
> - nxlen = inlen +
> rte_pktmbuf_data_len(mbuf);
> - } while (unlikely(nxlen < txq->inlen_send));
> - }
> - start = rte_pktmbuf_mtod(mbuf, uintptr_t);
> - /*
> - * Check whether we can do inline to align start
> - * address of data buffer to cacheline.
> - */
> -do_align:
> - start = (~start + 1) & (RTE_CACHE_LINE_SIZE - 1);
> - if (unlikely(start)) {
> - start += inlen;
> - if (start <= txq->inlen_send)
> - inlen = start;
> - }
> - }
> - /*
> - * Check whether there are enough free WQEBBs:
> - * - Control Segment
> - * - Ethernet Segment
> - * - First Segment of inlined Ethernet data
> - * - ... data continued ...
> - * - Data Segments of pointer/min inline type
> - *
> - * Estimate the number of Data Segments conservatively,
> - * supposing no any mbufs is being freed during inlining.
> - */
> - MLX5_ASSERT(inlen <= txq->inlen_send);
> - ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
> - MLX5_ESEG_MIN_INLINE_SIZE +
> - MLX5_WSEG_SIZE +
> - MLX5_WSEG_SIZE - 1) /
> MLX5_WSEG_SIZE;
> - if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
> - return MLX5_TXCMP_CODE_EXIT;
> - /* Check for maximal WQE size. */
> - if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) /
> 4)))
> - return MLX5_TXCMP_CODE_ERROR;
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes/packets counters. */
> - txq->stats.obytes += dlen + vlan;
> -#endif
> - wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> - loc->wqe_last = wqe;
> - mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_SEND, olx);
> - ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 0, olx);
> - wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
> - txq->wqe_ci += (ds + 3) / 4;
> - loc->wqe_free -= (ds + 3) / 4;
> - return MLX5_TXCMP_CODE_MULTI;
> -}
> -
> -/**
> - * Tx burst function for multi-segment packets. Supports all
> - * types of Tx offloads, uses MLX5_OPCODE_SEND/TSO to build WQEs,
> - * sends one packet per WQE. Function stops sending if it
> - * encounters the single-segment packet.
> - *
> - * This routine is responsible for storing processed mbuf
> - * into elts ring buffer and update elts_head.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param[in] pkts
> - * Packets to transmit.
> - * @param pkts_n
> - * Number of packets in array.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> - * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> - * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
> - * MLX5_TXCMP_CODE_TSO - TSO single-segment packet encountered.
> - * Local context variables updated.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_burst_mseg(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - unsigned int pkts_n,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> - MLX5_ASSERT(pkts_n > loc->pkts_sent);
> - pkts += loc->pkts_sent + 1;
> - pkts_n -= loc->pkts_sent;
> - for (;;) {
> - enum mlx5_txcmp_code ret;
> -
> - MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
> - /*
> - * Estimate the number of free elts quickly but
> - * conservatively. Some segment may be fully inlined
> - * and freed, ignore this here - precise estimation
> - * is costly.
> - */
> - if (loc->elts_free < NB_SEGS(loc->mbuf))
> - return MLX5_TXCMP_CODE_EXIT;
> - if (MLX5_TXOFF_CONFIG(TSO) &&
> - unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)) {
> - /* Proceed with multi-segment TSO. */
> - ret = mlx5_tx_packet_multi_tso(txq, loc, olx);
> - } else if (MLX5_TXOFF_CONFIG(INLINE)) {
> - /* Proceed with multi-segment SEND with inlining. */
> - ret = mlx5_tx_packet_multi_inline(txq, loc, olx);
> - } else {
> - /* Proceed with multi-segment SEND w/o inlining. */
> - ret = mlx5_tx_packet_multi_send(txq, loc, olx);
> - }
> - if (ret == MLX5_TXCMP_CODE_EXIT)
> - return MLX5_TXCMP_CODE_EXIT;
> - if (ret == MLX5_TXCMP_CODE_ERROR)
> - return MLX5_TXCMP_CODE_ERROR;
> - /* WQE is built, go to the next packet. */
> - ++loc->pkts_sent;
> - --pkts_n;
> - if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - loc->mbuf = *pkts++;
> - if (pkts_n > 1)
> - rte_prefetch0(*pkts);
> - if (likely(NB_SEGS(loc->mbuf) > 1))
> - continue;
> - /* Here ends the series of multi-segment packets. */
> - if (MLX5_TXOFF_CONFIG(TSO) &&
> - unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
> - return MLX5_TXCMP_CODE_TSO;
> - return MLX5_TXCMP_CODE_SINGLE;
> - }
> - MLX5_ASSERT(false);
> -}
> -
> -/**
> - * Tx burst function for single-segment packets with TSO.
> - * Supports all types of Tx offloads, except multi-packets.
> - * Uses MLX5_OPCODE_TSO to build WQEs, sends one packet per WQE.
> - * Function stops sending if it encounters the multi-segment
> - * packet or packet without TSO requested.
> - *
> - * The routine is responsible for storing processed mbuf
> - * into elts ring buffer and update elts_head if inline
> - * offloads is requested due to possible early freeing
> - * of the inlined mbufs (can not store pkts array in elts
> - * as a batch).
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param[in] pkts
> - * Packets to transmit.
> - * @param pkts_n
> - * Number of packets in array.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> - * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> - * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
> - * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
> - * Local context variables updated.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_burst_tso(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - unsigned int pkts_n,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> - MLX5_ASSERT(pkts_n > loc->pkts_sent);
> - pkts += loc->pkts_sent + 1;
> - pkts_n -= loc->pkts_sent;
> - for (;;) {
> - struct mlx5_wqe_dseg *__rte_restrict dseg;
> - struct mlx5_wqe *__rte_restrict wqe;
> - unsigned int ds, dlen, hlen, ntcp, vlan = 0;
> - uint8_t *dptr;
> -
> - MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> - if (MLX5_TXOFF_CONFIG(TXPP)) {
> - enum mlx5_txcmp_code wret;
> -
> - /* Generate WAIT for scheduling if requested. */
> - wret = mlx5_tx_schedule_send(txq, loc, olx);
> - if (wret == MLX5_TXCMP_CODE_EXIT)
> - return MLX5_TXCMP_CODE_EXIT;
> - if (wret == MLX5_TXCMP_CODE_ERROR)
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - dlen = rte_pktmbuf_data_len(loc->mbuf);
> - if (MLX5_TXOFF_CONFIG(VLAN) &&
> - loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
> - vlan = sizeof(struct rte_vlan_hdr);
> - }
> - /*
> - * First calculate the WQE size to check
> - * whether we have enough space in ring buffer.
> - */
> - hlen = loc->mbuf->l2_len + vlan +
> - loc->mbuf->l3_len + loc->mbuf->l4_len;
> - if (unlikely((!hlen || !loc->mbuf->tso_segsz)))
> - return MLX5_TXCMP_CODE_ERROR;
> - if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
> - hlen += loc->mbuf->outer_l2_len +
> - loc->mbuf->outer_l3_len;
> - /* Segment must contain all TSO headers. */
> - if (unlikely(hlen > MLX5_MAX_TSO_HEADER ||
> - hlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
> - hlen > (dlen + vlan)))
> - return MLX5_TXCMP_CODE_ERROR;
> - /*
> - * Check whether there are enough free WQEBBs:
> - * - Control Segment
> - * - Ethernet Segment
> - * - First Segment of inlined Ethernet data
> - * - ... data continued ...
> - * - Finishing Data Segment of pointer type
> - */
> - ds = 4 + (hlen - MLX5_ESEG_MIN_INLINE_SIZE +
> - MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
> - if (loc->wqe_free < ((ds + 3) / 4))
> - return MLX5_TXCMP_CODE_EXIT;
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes/packets counters. */
> - ntcp = (dlen + vlan - hlen +
> - loc->mbuf->tso_segsz - 1) /
> - loc->mbuf->tso_segsz;
> - /*
> - * One will be added for mbuf itself at the end
> - * of the mlx5_tx_burst from loc->pkts_sent field.
> - */
> - --ntcp;
> - txq->stats.opackets += ntcp;
> - txq->stats.obytes += dlen + vlan + ntcp * hlen;
> -#endif
> - /*
> - * Build the TSO WQE:
> - * - Control Segment
> - * - Ethernet Segment with hlen bytes inlined
> - * - Data Segment of pointer type
> - */
> - wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> - loc->wqe_last = wqe;
> - mlx5_tx_cseg_init(txq, loc, wqe, ds,
> - MLX5_OPCODE_TSO, olx);
> - dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan, hlen, 1, olx);
> - dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) + hlen -
> vlan;
> - dlen -= hlen - vlan;
> - mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
> - /*
> - * WQE is built, update the loop parameters
> - * and go to the next packet.
> - */
> - txq->wqe_ci += (ds + 3) / 4;
> - loc->wqe_free -= (ds + 3) / 4;
> - if (MLX5_TXOFF_CONFIG(INLINE))
> - txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> - --loc->elts_free;
> - ++loc->pkts_sent;
> - --pkts_n;
> - if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - loc->mbuf = *pkts++;
> - if (pkts_n > 1)
> - rte_prefetch0(*pkts);
> - if (MLX5_TXOFF_CONFIG(MULTI) &&
> - unlikely(NB_SEGS(loc->mbuf) > 1))
> - return MLX5_TXCMP_CODE_MULTI;
> - if (likely(!(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)))
> - return MLX5_TXCMP_CODE_SINGLE;
> - /* Continue with the next TSO packet. */
> - }
> - MLX5_ASSERT(false);
> -}
> -
> -/**
> - * Analyze the packet and select the best method to send.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - * @param newp
> - * The predefined flag whether do complete check for
> - * multi-segment packets and TSO.
> - *
> - * @return
> - * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
> - * MLX5_TXCMP_CODE_TSO - TSO required, use TSO/LSO.
> - * MLX5_TXCMP_CODE_SINGLE - single-segment packet, use SEND.
> - * MLX5_TXCMP_CODE_EMPW - single-segment packet, use MPW.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_able_to_empw(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx,
> - bool newp)
> -{
> - /* Check for multi-segment packet. */
> - if (newp &&
> - MLX5_TXOFF_CONFIG(MULTI) &&
> - unlikely(NB_SEGS(loc->mbuf) > 1))
> - return MLX5_TXCMP_CODE_MULTI;
> - /* Check for TSO packet. */
> - if (newp &&
> - MLX5_TXOFF_CONFIG(TSO) &&
> - unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
> - return MLX5_TXCMP_CODE_TSO;
> - /* Check if eMPW is enabled at all. */
> - if (!MLX5_TXOFF_CONFIG(EMPW))
> - return MLX5_TXCMP_CODE_SINGLE;
> - /* Check if eMPW can be engaged. */
> - if (MLX5_TXOFF_CONFIG(VLAN) &&
> - unlikely(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) &&
> - (!MLX5_TXOFF_CONFIG(INLINE) ||
> - unlikely((rte_pktmbuf_data_len(loc->mbuf) +
> - sizeof(struct rte_vlan_hdr)) > txq->inlen_empw))) {
> - /*
> - * eMPW does not support VLAN insertion offload,
> - * we have to inline the entire packet but
> - * packet is too long for inlining.
> - */
> - return MLX5_TXCMP_CODE_SINGLE;
> - }
> - return MLX5_TXCMP_CODE_EMPW;
> -}
> -
> -/**
> - * Check the next packet attributes to match with the eMPW batch ones.
> - * In addition, for legacy MPW the packet length is checked either.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param es
> - * Pointer to Ethernet Segment of eMPW batch.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param dlen
> - * Length of previous packet in MPW descriptor.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * true - packet match with eMPW batch attributes.
> - * false - no match, eMPW should be restarted.
> - */
> -static __rte_always_inline bool
> -mlx5_tx_match_empw(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_wqe_eseg *__rte_restrict es,
> - struct mlx5_txq_local *__rte_restrict loc,
> - uint32_t dlen,
> - unsigned int olx)
> -{
> - uint8_t swp_flags = 0;
> -
> - /* Compare the checksum flags, if any. */
> - if (MLX5_TXOFF_CONFIG(CSUM) &&
> - txq_ol_cksum_to_cs(loc->mbuf) != es->cs_flags)
> - return false;
> - /* Compare the Software Parser offsets and flags. */
> - if (MLX5_TXOFF_CONFIG(SWP) &&
> - (es->swp_offs != txq_mbuf_to_swp(loc, &swp_flags, olx) ||
> - es->swp_flags != swp_flags))
> - return false;
> - /* Fill metadata field if needed. */
> - if (MLX5_TXOFF_CONFIG(METADATA) &&
> - es->metadata != (loc->mbuf->ol_flags &
> PKT_TX_DYNF_METADATA ?
> - *RTE_FLOW_DYNF_METADATA(loc->mbuf) :
> 0))
> - return false;
> - /* Legacy MPW can send packets with the same lengt only. */
> - if (MLX5_TXOFF_CONFIG(MPW) &&
> - dlen != rte_pktmbuf_data_len(loc->mbuf))
> - return false;
> - /* There must be no VLAN packets in eMPW loop. */
> - if (MLX5_TXOFF_CONFIG(VLAN))
> - MLX5_ASSERT(!(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT));
> - /* Check if the scheduling is requested. */
> - if (MLX5_TXOFF_CONFIG(TXPP) &&
> - loc->mbuf->ol_flags & txq->ts_mask)
> - return false;
> - return true;
> -}
> -
> -/*
> - * Update send loop variables and WQE for eMPW loop
> - * without data inlining. Number of Data Segments is
> - * equal to the number of sent packets.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param ds
> - * Number of packets/Data Segments/Packets.
> - * @param slen
> - * Accumulated statistics, bytes sent
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * true - packet match with eMPW batch attributes.
> - * false - no match, eMPW should be restarted.
> - */
> -static __rte_always_inline void
> -mlx5_tx_sdone_empw(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int ds,
> - unsigned int slen,
> - unsigned int olx __rte_unused)
> -{
> - MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes counter. */
> - txq->stats.obytes += slen;
> -#else
> - (void)slen;
> -#endif
> - loc->elts_free -= ds;
> - loc->pkts_sent += ds;
> - ds += 2;
> - loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s |
> ds);
> - txq->wqe_ci += (ds + 3) / 4;
> - loc->wqe_free -= (ds + 3) / 4;
> -}
> -
> -/*
> - * Update send loop variables and WQE for eMPW loop
> - * with data inlining. Gets the size of pushed descriptors
> - * and data to the WQE.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param len
> - * Total size of descriptor/data in bytes.
> - * @param slen
> - * Accumulated statistics, data bytes sent.
> - * @param wqem
> - * The base WQE for the eMPW/MPW descriptor.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * true - packet match with eMPW batch attributes.
> - * false - no match, eMPW should be restarted.
> - */
> -static __rte_always_inline void
> -mlx5_tx_idone_empw(struct mlx5_txq_data *__rte_restrict txq,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int len,
> - unsigned int slen,
> - struct mlx5_wqe *__rte_restrict wqem,
> - unsigned int olx __rte_unused)
> -{
> - struct mlx5_wqe_dseg *dseg = &wqem->dseg[0];
> -
> - MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes counter. */
> - txq->stats.obytes += slen;
> -#else
> - (void)slen;
> -#endif
> - if (MLX5_TXOFF_CONFIG(MPW) && dseg->bcount == RTE_BE32(0)) {
> - /*
> - * If the legacy MPW session contains the inline packets
> - * we should set the only inline data segment length
> - * and align the total length to the segment size.
> - */
> - MLX5_ASSERT(len > sizeof(dseg->bcount));
> - dseg->bcount = rte_cpu_to_be_32((len - sizeof(dseg-
> >bcount)) |
> -
> MLX5_ETH_WQE_DATA_INLINE);
> - len = (len + MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE + 2;
> - } else {
> - /*
> - * The session is not legacy MPW or contains the
> - * data buffer pointer segments.
> - */
> - MLX5_ASSERT((len % MLX5_WSEG_SIZE) == 0);
> - len = len / MLX5_WSEG_SIZE + 2;
> - }
> - wqem->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
> - txq->wqe_ci += (len + 3) / 4;
> - loc->wqe_free -= (len + 3) / 4;
> - loc->wqe_last = wqem;
> -}
> -
> -/**
> - * The set of Tx burst functions for single-segment packets
> - * without TSO and with Multi-Packet Writing feature support.
> - * Supports all types of Tx offloads, except multi-packets
> - * and TSO.
> - *
> - * Uses MLX5_OPCODE_EMPW to build WQEs if possible and sends
> - * as many packet per WQE as it can. If eMPW is not configured
> - * or packet can not be sent with eMPW (VLAN insertion) the
> - * ordinary SEND opcode is used and only one packet placed
> - * in WQE.
> - *
> - * Functions stop sending if it encounters the multi-segment
> - * packet or packet with TSO requested.
> - *
> - * The routines are responsible for storing processed mbuf
> - * into elts ring buffer and update elts_head if inlining
> - * offload is requested. Otherwise the copying mbufs to elts
> - * can be postponed and completed at the end of burst routine.
> - *
> - * @param txq
> - * Pointer to TX queue structure.
> - * @param[in] pkts
> - * Packets to transmit.
> - * @param pkts_n
> - * Number of packets in array.
> - * @param loc
> - * Pointer to burst routine local context.
> - * @param olx
> - * Configured Tx offloads mask. It is fully defined at
> - * compile time and may be used for optimization.
> - *
> - * @return
> - * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> - * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> - * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
> - * MLX5_TXCMP_CODE_TSO - TSO packet encountered.
> - * MLX5_TXCMP_CODE_SINGLE - used inside functions set.
> - * MLX5_TXCMP_CODE_EMPW - used inside functions set.
> - *
> - * Local context variables updated.
> - *
> - *
> - * The routine sends packets with MLX5_OPCODE_EMPW
> - * without inlining, this is dedicated optimized branch.
> - * No VLAN insertion is supported.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_burst_empw_simple(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - unsigned int pkts_n,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - /*
> - * Subroutine is the part of mlx5_tx_burst_single()
> - * and sends single-segment packet with eMPW opcode
> - * without data inlining.
> - */
> - MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
> - MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
> - MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> - MLX5_ASSERT(pkts_n > loc->pkts_sent);
> - pkts += loc->pkts_sent + 1;
> - pkts_n -= loc->pkts_sent;
> - for (;;) {
> - struct mlx5_wqe_dseg *__rte_restrict dseg;
> - struct mlx5_wqe_eseg *__rte_restrict eseg;
> - enum mlx5_txcmp_code ret;
> - unsigned int part, loop;
> - unsigned int slen = 0;
> -
> -next_empw:
> - MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> - if (MLX5_TXOFF_CONFIG(TXPP)) {
> - enum mlx5_txcmp_code wret;
> -
> - /* Generate WAIT for scheduling if requested. */
> - wret = mlx5_tx_schedule_send(txq, loc, olx);
> - if (wret == MLX5_TXCMP_CODE_EXIT)
> - return MLX5_TXCMP_CODE_EXIT;
> - if (wret == MLX5_TXCMP_CODE_ERROR)
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
> - MLX5_MPW_MAX_PACKETS :
> - MLX5_EMPW_MAX_PACKETS);
> - if (unlikely(loc->elts_free < part)) {
> - /* We have no enough elts to save all mbufs. */
> - if (unlikely(loc->elts_free <
> MLX5_EMPW_MIN_PACKETS))
> - return MLX5_TXCMP_CODE_EXIT;
> - /* But we still able to send at least minimal eMPW. */
> - part = loc->elts_free;
> - }
> - /* Check whether we have enough WQEs */
> - if (unlikely(loc->wqe_free < ((2 + part + 3) / 4))) {
> - if (unlikely(loc->wqe_free <
> - ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
> - return MLX5_TXCMP_CODE_EXIT;
> - part = (loc->wqe_free * 4) - 2;
> - }
> - if (likely(part > 1))
> - rte_prefetch0(*pkts);
> - loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> - /*
> - * Build eMPW title WQEBB:
> - * - Control Segment, eMPW opcode
> - * - Ethernet Segment, no inline
> - */
> - mlx5_tx_cseg_init(txq, loc, loc->wqe_last, part + 2,
> - MLX5_OPCODE_ENHANCED_MPSW, olx);
> - mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
> - olx & ~MLX5_TXOFF_CONFIG_VLAN);
> - eseg = &loc->wqe_last->eseg;
> - dseg = &loc->wqe_last->dseg[0];
> - loop = part;
> - /* Store the packet length for legacy MPW. */
> - if (MLX5_TXOFF_CONFIG(MPW))
> - eseg->mss = rte_cpu_to_be_16
> - (rte_pktmbuf_data_len(loc->mbuf));
> - for (;;) {
> - uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes counter. */
> - slen += dlen;
> -#endif
> - mlx5_tx_dseg_ptr
> - (txq, loc, dseg,
> - rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
> - dlen, olx);
> - if (unlikely(--loop == 0))
> - break;
> - loc->mbuf = *pkts++;
> - if (likely(loop > 1))
> - rte_prefetch0(*pkts);
> - ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
> - /*
> - * Unroll the completion code to avoid
> - * returning variable value - it results in
> - * unoptimized sequent checking in caller.
> - */
> - if (ret == MLX5_TXCMP_CODE_MULTI) {
> - part -= loop;
> - mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> - if (unlikely(!loc->elts_free ||
> - !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - return MLX5_TXCMP_CODE_MULTI;
> - }
> - MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> - if (ret == MLX5_TXCMP_CODE_TSO) {
> - part -= loop;
> - mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> - if (unlikely(!loc->elts_free ||
> - !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - return MLX5_TXCMP_CODE_TSO;
> - }
> - if (ret == MLX5_TXCMP_CODE_SINGLE) {
> - part -= loop;
> - mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> - if (unlikely(!loc->elts_free ||
> - !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - return MLX5_TXCMP_CODE_SINGLE;
> - }
> - if (ret != MLX5_TXCMP_CODE_EMPW) {
> - MLX5_ASSERT(false);
> - part -= loop;
> - mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - /*
> - * Check whether packet parameters coincide
> - * within assumed eMPW batch:
> - * - check sum settings
> - * - metadata value
> - * - software parser settings
> - * - packets length (legacy MPW only)
> - * - scheduling is not required
> - */
> - if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
> - MLX5_ASSERT(loop);
> - part -= loop;
> - mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> - if (unlikely(!loc->elts_free ||
> - !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - pkts_n -= part;
> - goto next_empw;
> - }
> - /* Packet attributes match, continue the same
> eMPW. */
> - ++dseg;
> - if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> - dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> - }
> - /* eMPW is built successfully, update loop parameters. */
> - MLX5_ASSERT(!loop);
> - MLX5_ASSERT(pkts_n >= part);
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes counter. */
> - txq->stats.obytes += slen;
> -#endif
> - loc->elts_free -= part;
> - loc->pkts_sent += part;
> - txq->wqe_ci += (2 + part + 3) / 4;
> - loc->wqe_free -= (2 + part + 3) / 4;
> - pkts_n -= part;
> - if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - loc->mbuf = *pkts++;
> - ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
> - if (unlikely(ret != MLX5_TXCMP_CODE_EMPW))
> - return ret;
> - /* Continue sending eMPW batches. */
> - }
> - MLX5_ASSERT(false);
> -}
> -
> -/**
> - * The routine sends packets with MLX5_OPCODE_EMPW
> - * with inlining, optionally supports VLAN insertion.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_burst_empw_inline(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - unsigned int pkts_n,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - /*
> - * Subroutine is the part of mlx5_tx_burst_single()
> - * and sends single-segment packet with eMPW opcode
> - * with data inlining.
> - */
> - MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> - MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
> - MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> - MLX5_ASSERT(pkts_n > loc->pkts_sent);
> - pkts += loc->pkts_sent + 1;
> - pkts_n -= loc->pkts_sent;
> - for (;;) {
> - struct mlx5_wqe_dseg *__rte_restrict dseg;
> - struct mlx5_wqe *__rte_restrict wqem;
> - enum mlx5_txcmp_code ret;
> - unsigned int room, part, nlim;
> - unsigned int slen = 0;
> -
> - MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> - if (MLX5_TXOFF_CONFIG(TXPP)) {
> - enum mlx5_txcmp_code wret;
> -
> - /* Generate WAIT for scheduling if requested. */
> - wret = mlx5_tx_schedule_send(txq, loc, olx);
> - if (wret == MLX5_TXCMP_CODE_EXIT)
> - return MLX5_TXCMP_CODE_EXIT;
> - if (wret == MLX5_TXCMP_CODE_ERROR)
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - /*
> - * Limits the amount of packets in one WQE
> - * to improve CQE latency generation.
> - */
> - nlim = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
> - MLX5_MPW_INLINE_MAX_PACKETS :
> - MLX5_EMPW_MAX_PACKETS);
> - /* Check whether we have minimal amount WQEs */
> - if (unlikely(loc->wqe_free <
> - ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
> - return MLX5_TXCMP_CODE_EXIT;
> - if (likely(pkts_n > 1))
> - rte_prefetch0(*pkts);
> - wqem = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> - /*
> - * Build eMPW title WQEBB:
> - * - Control Segment, eMPW opcode, zero DS
> - * - Ethernet Segment, no inline
> - */
> - mlx5_tx_cseg_init(txq, loc, wqem, 0,
> - MLX5_OPCODE_ENHANCED_MPSW, olx);
> - mlx5_tx_eseg_none(txq, loc, wqem,
> - olx & ~MLX5_TXOFF_CONFIG_VLAN);
> - dseg = &wqem->dseg[0];
> - /* Store the packet length for legacy MPW. */
> - if (MLX5_TXOFF_CONFIG(MPW))
> - wqem->eseg.mss = rte_cpu_to_be_16
> - (rte_pktmbuf_data_len(loc-
> >mbuf));
> - room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
> - loc->wqe_free) * MLX5_WQE_SIZE -
> - MLX5_WQE_CSEG_SIZE -
> - MLX5_WQE_ESEG_SIZE;
> - /* Limit the room for legacy MPW sessions for performance.
> */
> - if (MLX5_TXOFF_CONFIG(MPW))
> - room = RTE_MIN(room,
> - RTE_MAX(txq->inlen_empw +
> - sizeof(dseg->bcount) +
> - (MLX5_TXOFF_CONFIG(VLAN) ?
> - sizeof(struct rte_vlan_hdr) : 0),
> -
> MLX5_MPW_INLINE_MAX_PACKETS *
> - MLX5_WQE_DSEG_SIZE));
> - /* Build WQE till we have space, packets and resources. */
> - part = room;
> - for (;;) {
> - uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
> - uint8_t *dptr = rte_pktmbuf_mtod(loc->mbuf,
> uint8_t *);
> - unsigned int tlen;
> -
> - MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
> - MLX5_ASSERT((room % MLX5_WQE_DSEG_SIZE) ==
> 0);
> - MLX5_ASSERT((uintptr_t)dseg < (uintptr_t)txq-
> >wqes_end);
> - /*
> - * Some Tx offloads may cause an error if
> - * packet is not long enough, check against
> - * assumed minimal length.
> - */
> - if (unlikely(dlen <= MLX5_ESEG_MIN_INLINE_SIZE)) {
> - part -= room;
> - if (unlikely(!part))
> - return MLX5_TXCMP_CODE_ERROR;
> - /*
> - * We have some successfully built
> - * packet Data Segments to send.
> - */
> - mlx5_tx_idone_empw(txq, loc, part,
> - slen, wqem, olx);
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - /* Inline or not inline - that's the Question. */
> - if (dlen > txq->inlen_empw ||
> - loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE)
> - goto pointer_empw;
> - if (MLX5_TXOFF_CONFIG(MPW)) {
> - if (dlen > txq->inlen_send)
> - goto pointer_empw;
> - tlen = dlen;
> - if (part == room) {
> - /* Open new inline MPW session. */
> - tlen += sizeof(dseg->bcount);
> - dseg->bcount = RTE_BE32(0);
> - dseg = RTE_PTR_ADD
> - (dseg, sizeof(dseg->bcount));
> - } else {
> - /*
> - * No pointer and inline descriptor
> - * intermix for legacy MPW sessions.
> - */
> - if (wqem->dseg[0].bcount)
> - break;
> - }
> - } else {
> - tlen = sizeof(dseg->bcount) + dlen;
> - }
> - /* Inline entire packet, optional VLAN insertion. */
> - if (MLX5_TXOFF_CONFIG(VLAN) &&
> - loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
> - /*
> - * The packet length must be checked in
> - * mlx5_tx_able_to_empw() and packet
> - * fits into inline length guaranteed.
> - */
> - MLX5_ASSERT((dlen +
> - sizeof(struct rte_vlan_hdr)) <=
> - txq->inlen_empw);
> - tlen += sizeof(struct rte_vlan_hdr);
> - if (room < tlen)
> - break;
> - dseg = mlx5_tx_dseg_vlan(txq, loc, dseg,
> - dptr, dlen, olx);
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes counter. */
> - slen += sizeof(struct rte_vlan_hdr);
> -#endif
> - } else {
> - if (room < tlen)
> - break;
> - dseg = mlx5_tx_dseg_empw(txq, loc, dseg,
> - dptr, dlen, olx);
> - }
> - if (!MLX5_TXOFF_CONFIG(MPW))
> - tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
> - MLX5_ASSERT(room >= tlen);
> - room -= tlen;
> - /*
> - * Packet data are completely inline,
> - * we can try to free the packet.
> - */
> - if (likely(loc->pkts_sent == loc->mbuf_free)) {
> - /*
> - * All the packets from the burst beginning
> - * are inline, we can free mbufs directly
> - * from the origin array on tx_burst exit().
> - */
> - loc->mbuf_free++;
> - goto next_mbuf;
> - }
> - /*
> - * In order no to call rte_pktmbuf_free_seg() here,
> - * in the most inner loop (that might be very
> - * expensive) we just save the mbuf in elts.
> - */
> - txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> - loc->elts_free--;
> - goto next_mbuf;
> -pointer_empw:
> - /*
> - * No pointer and inline descriptor
> - * intermix for legacy MPW sessions.
> - */
> - if (MLX5_TXOFF_CONFIG(MPW) &&
> - part != room &&
> - wqem->dseg[0].bcount == RTE_BE32(0))
> - break;
> - /*
> - * Not inlinable VLAN packets are
> - * proceeded outside of this routine.
> - */
> - MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
> - if (MLX5_TXOFF_CONFIG(VLAN))
> - MLX5_ASSERT(!(loc->mbuf->ol_flags &
> - PKT_TX_VLAN_PKT));
> - mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
> - /* We have to store mbuf in elts.*/
> - txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> - loc->elts_free--;
> - room -= MLX5_WQE_DSEG_SIZE;
> - /* Ring buffer wraparound is checked at the loop
> end.*/
> - ++dseg;
> -next_mbuf:
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes counter. */
> - slen += dlen;
> -#endif
> - loc->pkts_sent++;
> - pkts_n--;
> - if (unlikely(!pkts_n || !loc->elts_free)) {
> - /*
> - * We have no resources/packets to
> - * continue build descriptors.
> - */
> - part -= room;
> - mlx5_tx_idone_empw(txq, loc, part,
> - slen, wqem, olx);
> - return MLX5_TXCMP_CODE_EXIT;
> - }
> - loc->mbuf = *pkts++;
> - if (likely(pkts_n > 1))
> - rte_prefetch0(*pkts);
> - ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
> - /*
> - * Unroll the completion code to avoid
> - * returning variable value - it results in
> - * unoptimized sequent checking in caller.
> - */
> - if (ret == MLX5_TXCMP_CODE_MULTI) {
> - part -= room;
> - mlx5_tx_idone_empw(txq, loc, part,
> - slen, wqem, olx);
> - if (unlikely(!loc->elts_free ||
> - !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - return MLX5_TXCMP_CODE_MULTI;
> - }
> - MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> - if (ret == MLX5_TXCMP_CODE_TSO) {
> - part -= room;
> - mlx5_tx_idone_empw(txq, loc, part,
> - slen, wqem, olx);
> - if (unlikely(!loc->elts_free ||
> - !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - return MLX5_TXCMP_CODE_TSO;
> - }
> - if (ret == MLX5_TXCMP_CODE_SINGLE) {
> - part -= room;
> - mlx5_tx_idone_empw(txq, loc, part,
> - slen, wqem, olx);
> - if (unlikely(!loc->elts_free ||
> - !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - return MLX5_TXCMP_CODE_SINGLE;
> - }
> - if (ret != MLX5_TXCMP_CODE_EMPW) {
> - MLX5_ASSERT(false);
> - part -= room;
> - mlx5_tx_idone_empw(txq, loc, part,
> - slen, wqem, olx);
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - /* Check if we have minimal room left. */
> - nlim--;
> - if (unlikely(!nlim || room < MLX5_WQE_DSEG_SIZE))
> - break;
> - /*
> - * Check whether packet parameters coincide
> - * within assumed eMPW batch:
> - * - check sum settings
> - * - metadata value
> - * - software parser settings
> - * - packets length (legacy MPW only)
> - * - scheduling is not required
> - */
> - if (!mlx5_tx_match_empw(txq, &wqem->eseg,
> - loc, dlen, olx))
> - break;
> - /* Packet attributes match, continue the same
> eMPW. */
> - if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> - dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> - }
> - /*
> - * We get here to close an existing eMPW
> - * session and start the new one.
> - */
> - MLX5_ASSERT(pkts_n);
> - part -= room;
> - if (unlikely(!part))
> - return MLX5_TXCMP_CODE_EXIT;
> - mlx5_tx_idone_empw(txq, loc, part, slen, wqem, olx);
> - if (unlikely(!loc->elts_free ||
> - !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - /* Continue the loop with new eMPW session. */
> - }
> - MLX5_ASSERT(false);
> -}
> -
> -/**
> - * The routine sends packets with ordinary MLX5_OPCODE_SEND.
> - * Data inlining and VLAN insertion are supported.
> - */
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_burst_single_send(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - unsigned int pkts_n,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - /*
> - * Subroutine is the part of mlx5_tx_burst_single()
> - * and sends single-segment packet with SEND opcode.
> - */
> - MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> - MLX5_ASSERT(pkts_n > loc->pkts_sent);
> - pkts += loc->pkts_sent + 1;
> - pkts_n -= loc->pkts_sent;
> - for (;;) {
> - struct mlx5_wqe *__rte_restrict wqe;
> - enum mlx5_txcmp_code ret;
> -
> - MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> - if (MLX5_TXOFF_CONFIG(TXPP)) {
> - enum mlx5_txcmp_code wret;
> -
> - /* Generate WAIT for scheduling if requested. */
> - wret = mlx5_tx_schedule_send(txq, loc, olx);
> - if (wret == MLX5_TXCMP_CODE_EXIT)
> - return MLX5_TXCMP_CODE_EXIT;
> - if (wret == MLX5_TXCMP_CODE_ERROR)
> - return MLX5_TXCMP_CODE_ERROR;
> - }
> - if (MLX5_TXOFF_CONFIG(INLINE)) {
> - unsigned int inlen, vlan = 0;
> -
> - inlen = rte_pktmbuf_data_len(loc->mbuf);
> - if (MLX5_TXOFF_CONFIG(VLAN) &&
> - loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
> - vlan = sizeof(struct rte_vlan_hdr);
> - inlen += vlan;
> - }
> - /*
> - * If inlining is enabled at configuration time
> - * the limit must be not less than minimal size.
> - * Otherwise we would do extra check for data
> - * size to avoid crashes due to length overflow.
> - */
> - MLX5_ASSERT(txq->inlen_send >=
> - MLX5_ESEG_MIN_INLINE_SIZE);
> - if (inlen <= txq->inlen_send) {
> - unsigned int seg_n, wqe_n;
> -
> - rte_prefetch0(rte_pktmbuf_mtod
> - (loc->mbuf, uint8_t *));
> - /* Check against minimal length. */
> - if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
> - return MLX5_TXCMP_CODE_ERROR;
> - if (loc->mbuf->ol_flags &
> - PKT_TX_DYNF_NOINLINE) {
> - /*
> - * The hint flag not to inline packet
> - * data is set. Check whether we can
> - * follow the hint.
> - */
> - if ((!MLX5_TXOFF_CONFIG(EMPW)
> &&
> - txq->inlen_mode) ||
> - (MLX5_TXOFF_CONFIG(MPW) &&
> - txq->inlen_mode)) {
> - if (inlen <= txq->inlen_send)
> - goto single_inline;
> - /*
> - * The hardware requires the
> - * minimal inline data header.
> - */
> - goto single_min_inline;
> - }
> - if (MLX5_TXOFF_CONFIG(VLAN) &&
> - vlan && !txq->vlan_en) {
> - /*
> - * We must insert VLAN tag
> - * by software means.
> - */
> - goto single_part_inline;
> - }
> - goto single_no_inline;
> - }
> -single_inline:
> - /*
> - * Completely inlined packet data WQE:
> - * - Control Segment, SEND opcode
> - * - Ethernet Segment, no VLAN insertion
> - * - Data inlined, VLAN optionally inserted
> - * - Alignment to MLX5_WSEG_SIZE
> - * Have to estimate amount of WQEBBs
> - */
> - seg_n = (inlen + 3 * MLX5_WSEG_SIZE -
> - MLX5_ESEG_MIN_INLINE_SIZE +
> - MLX5_WSEG_SIZE - 1) /
> MLX5_WSEG_SIZE;
> - /* Check if there are enough WQEBBs. */
> - wqe_n = (seg_n + 3) / 4;
> - if (wqe_n > loc->wqe_free)
> - return MLX5_TXCMP_CODE_EXIT;
> - wqe = txq->wqes + (txq->wqe_ci & txq-
> >wqe_m);
> - loc->wqe_last = wqe;
> - mlx5_tx_cseg_init(txq, loc, wqe, seg_n,
> - MLX5_OPCODE_SEND, olx);
> - mlx5_tx_eseg_data(txq, loc, wqe,
> - vlan, inlen, 0, olx);
> - txq->wqe_ci += wqe_n;
> - loc->wqe_free -= wqe_n;
> - /*
> - * Packet data are completely inlined,
> - * free the packet immediately.
> - */
> - rte_pktmbuf_free_seg(loc->mbuf);
> - } else if ((!MLX5_TXOFF_CONFIG(EMPW) ||
> - MLX5_TXOFF_CONFIG(MPW)) &&
> - txq->inlen_mode) {
> - /*
> - * If minimal inlining is requested the eMPW
> - * feature should be disabled due to data is
> - * inlined into Ethernet Segment, which can
> - * not contain inlined data for eMPW due to
> - * segment shared for all packets.
> - */
> - struct mlx5_wqe_dseg *__rte_restrict dseg;
> - unsigned int ds;
> - uint8_t *dptr;
> -
> - /*
> - * The inline-mode settings require
> - * to inline the specified amount of
> - * data bytes to the Ethernet Segment.
> - * We should check the free space in
> - * WQE ring buffer to inline partially.
> - */
> -single_min_inline:
> - MLX5_ASSERT(txq->inlen_send >= txq-
> >inlen_mode);
> - MLX5_ASSERT(inlen > txq->inlen_mode);
> - MLX5_ASSERT(txq->inlen_mode >=
> - MLX5_ESEG_MIN_INLINE_SIZE);
> - /*
> - * Check whether there are enough free
> WQEBBs:
> - * - Control Segment
> - * - Ethernet Segment
> - * - First Segment of inlined Ethernet data
> - * - ... data continued ...
> - * - Finishing Data Segment of pointer type
> - */
> - ds = (MLX5_WQE_CSEG_SIZE +
> - MLX5_WQE_ESEG_SIZE +
> - MLX5_WQE_DSEG_SIZE +
> - txq->inlen_mode -
> - MLX5_ESEG_MIN_INLINE_SIZE +
> - MLX5_WQE_DSEG_SIZE +
> - MLX5_WSEG_SIZE - 1) /
> MLX5_WSEG_SIZE;
> - if (loc->wqe_free < ((ds + 3) / 4))
> - return MLX5_TXCMP_CODE_EXIT;
> - /*
> - * Build the ordinary SEND WQE:
> - * - Control Segment
> - * - Ethernet Segment, inline inlen_mode
> bytes
> - * - Data Segment of pointer type
> - */
> - wqe = txq->wqes + (txq->wqe_ci & txq-
> >wqe_m);
> - loc->wqe_last = wqe;
> - mlx5_tx_cseg_init(txq, loc, wqe, ds,
> - MLX5_OPCODE_SEND, olx);
> - dseg = mlx5_tx_eseg_data(txq, loc, wqe,
> vlan,
> - txq->inlen_mode,
> - 0, olx);
> - dptr = rte_pktmbuf_mtod(loc->mbuf,
> uint8_t *) +
> - txq->inlen_mode - vlan;
> - inlen -= txq->inlen_mode;
> - mlx5_tx_dseg_ptr(txq, loc, dseg,
> - dptr, inlen, olx);
> - /*
> - * WQE is built, update the loop parameters
> - * and got to the next packet.
> - */
> - txq->wqe_ci += (ds + 3) / 4;
> - loc->wqe_free -= (ds + 3) / 4;
> - /* We have to store mbuf in elts.*/
> -
> MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> - txq->elts[txq->elts_head++ & txq->elts_m] =
> - loc->mbuf;
> - --loc->elts_free;
> - } else {
> - uint8_t *dptr;
> - unsigned int dlen;
> -
> - /*
> - * Partially inlined packet data WQE, we have
> - * some space in title WQEBB, we can fill it
> - * with some packet data. It takes one
> WQEBB,
> - * it is available, no extra space check:
> - * - Control Segment, SEND opcode
> - * - Ethernet Segment, no VLAN insertion
> - * - MLX5_ESEG_MIN_INLINE_SIZE bytes of
> Data
> - * - Data Segment, pointer type
> - *
> - * We also get here if VLAN insertion is not
> - * supported by HW, the inline is enabled.
> - */
> -single_part_inline:
> - wqe = txq->wqes + (txq->wqe_ci & txq-
> >wqe_m);
> - loc->wqe_last = wqe;
> - mlx5_tx_cseg_init(txq, loc, wqe, 4,
> - MLX5_OPCODE_SEND, olx);
> - mlx5_tx_eseg_dmin(txq, loc, wqe, vlan, olx);
> - dptr = rte_pktmbuf_mtod(loc->mbuf,
> uint8_t *) +
> - MLX5_ESEG_MIN_INLINE_SIZE - vlan;
> - /*
> - * The length check is performed above, by
> - * comparing with txq->inlen_send. We
> should
> - * not get overflow here.
> - */
> - MLX5_ASSERT(inlen >
> MLX5_ESEG_MIN_INLINE_SIZE);
> - dlen = inlen - MLX5_ESEG_MIN_INLINE_SIZE;
> - mlx5_tx_dseg_ptr(txq, loc, &wqe->dseg[1],
> - dptr, dlen, olx);
> - ++txq->wqe_ci;
> - --loc->wqe_free;
> - /* We have to store mbuf in elts.*/
> -
> MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> - txq->elts[txq->elts_head++ & txq->elts_m] =
> - loc->mbuf;
> - --loc->elts_free;
> - }
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes counter. */
> - txq->stats.obytes += vlan +
> - rte_pktmbuf_data_len(loc->mbuf);
> -#endif
> - } else {
> - /*
> - * No inline at all, it means the CPU cycles saving
> - * is prioritized at configuration, we should not
> - * copy any packet data to WQE.
> - *
> - * SEND WQE, one WQEBB:
> - * - Control Segment, SEND opcode
> - * - Ethernet Segment, optional VLAN, no inline
> - * - Data Segment, pointer type
> - */
> -single_no_inline:
> - wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> - loc->wqe_last = wqe;
> - mlx5_tx_cseg_init(txq, loc, wqe, 3,
> - MLX5_OPCODE_SEND, olx);
> - mlx5_tx_eseg_none(txq, loc, wqe, olx);
> - mlx5_tx_dseg_ptr
> - (txq, loc, &wqe->dseg[0],
> - rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
> - rte_pktmbuf_data_len(loc->mbuf), olx);
> - ++txq->wqe_ci;
> - --loc->wqe_free;
> - /*
> - * We should not store mbuf pointer in elts
> - * if no inlining is configured, this is done
> - * by calling routine in a batch copy.
> - */
> - MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
> - --loc->elts_free;
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Update sent data bytes counter. */
> - txq->stats.obytes += rte_pktmbuf_data_len(loc-
> >mbuf);
> - if (MLX5_TXOFF_CONFIG(VLAN) &&
> - loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
> - txq->stats.obytes +=
> - sizeof(struct rte_vlan_hdr);
> -#endif
> - }
> - ++loc->pkts_sent;
> - --pkts_n;
> - if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
> - return MLX5_TXCMP_CODE_EXIT;
> - loc->mbuf = *pkts++;
> - if (pkts_n > 1)
> - rte_prefetch0(*pkts);
> - ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
> - if (unlikely(ret != MLX5_TXCMP_CODE_SINGLE))
> - return ret;
> - }
> - MLX5_ASSERT(false);
> -}
> -
> -static __rte_always_inline enum mlx5_txcmp_code
> -mlx5_tx_burst_single(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - unsigned int pkts_n,
> - struct mlx5_txq_local *__rte_restrict loc,
> - unsigned int olx)
> -{
> - enum mlx5_txcmp_code ret;
> -
> - ret = mlx5_tx_able_to_empw(txq, loc, olx, false);
> - if (ret == MLX5_TXCMP_CODE_SINGLE)
> - goto ordinary_send;
> - MLX5_ASSERT(ret == MLX5_TXCMP_CODE_EMPW);
> - for (;;) {
> - /* Optimize for inline/no inline eMPW send. */
> - ret = (MLX5_TXOFF_CONFIG(INLINE)) ?
> - mlx5_tx_burst_empw_inline
> - (txq, pkts, pkts_n, loc, olx) :
> - mlx5_tx_burst_empw_simple
> - (txq, pkts, pkts_n, loc, olx);
> - if (ret != MLX5_TXCMP_CODE_SINGLE)
> - return ret;
> - /* The resources to send one packet should remain. */
> - MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> -ordinary_send:
> - ret = mlx5_tx_burst_single_send(txq, pkts, pkts_n, loc, olx);
> - MLX5_ASSERT(ret != MLX5_TXCMP_CODE_SINGLE);
> - if (ret != MLX5_TXCMP_CODE_EMPW)
> - return ret;
> - /* The resources to send one packet should remain. */
> - MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> - }
> -}
> -
> -/**
> - * DPDK Tx callback template. This is configured template
> - * used to generate routines optimized for specified offload setup.
> - * One of this generated functions is chosen at SQ configuration
> - * time.
> - *
> - * @param txq
> - * Generic pointer to TX queue structure.
> - * @param[in] pkts
> - * Packets to transmit.
> - * @param pkts_n
> - * Number of packets in array.
> - * @param olx
> - * Configured offloads mask, presents the bits of
> MLX5_TXOFF_CONFIG_xxx
> - * values. Should be static to take compile time static configuration
> - * advantages.
> - *
> - * @return
> - * Number of packets successfully transmitted (<= pkts_n).
> - */
> -static __rte_always_inline uint16_t
> -mlx5_tx_burst_tmpl(struct mlx5_txq_data *__rte_restrict txq,
> - struct rte_mbuf **__rte_restrict pkts,
> - uint16_t pkts_n,
> - unsigned int olx)
> -{
> - struct mlx5_txq_local loc;
> - enum mlx5_txcmp_code ret;
> - unsigned int part;
> -
> - MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq-
> >elts_tail));
> - MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq-
> >wqe_pi));
> - if (unlikely(!pkts_n))
> - return 0;
> - if (MLX5_TXOFF_CONFIG(INLINE))
> - loc.mbuf_free = 0;
> - loc.pkts_sent = 0;
> - loc.pkts_copy = 0;
> - loc.wqe_last = NULL;
> -
> -send_loop:
> - loc.pkts_loop = loc.pkts_sent;
> - /*
> - * Check if there are some CQEs, if any:
> - * - process an encountered errors
> - * - process the completed WQEs
> - * - free related mbufs
> - * - doorbell the NIC about processed CQEs
> - */
> - rte_prefetch0(*(pkts + loc.pkts_sent));
> - mlx5_tx_handle_completion(txq, olx);
> - /*
> - * Calculate the number of available resources - elts and WQEs.
> - * There are two possible different scenarios:
> - * - no data inlining into WQEs, one WQEBB may contains up to
> - * four packets, in this case elts become scarce resource
> - * - data inlining into WQEs, one packet may require multiple
> - * WQEBBs, the WQEs become the limiting factor.
> - */
> - MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq-
> >elts_tail));
> - loc.elts_free = txq->elts_s -
> - (uint16_t)(txq->elts_head - txq->elts_tail);
> - MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq-
> >wqe_pi));
> - loc.wqe_free = txq->wqe_s -
> - (uint16_t)(txq->wqe_ci - txq->wqe_pi);
> - if (unlikely(!loc.elts_free || !loc.wqe_free))
> - goto burst_exit;
> - for (;;) {
> - /*
> - * Fetch the packet from array. Usually this is
> - * the first packet in series of multi/single
> - * segment packets.
> - */
> - loc.mbuf = *(pkts + loc.pkts_sent);
> - /* Dedicated branch for multi-segment packets. */
> - if (MLX5_TXOFF_CONFIG(MULTI) &&
> - unlikely(NB_SEGS(loc.mbuf) > 1)) {
> - /*
> - * Multi-segment packet encountered.
> - * Hardware is able to process it only
> - * with SEND/TSO opcodes, one packet
> - * per WQE, do it in dedicated routine.
> - */
> -enter_send_multi:
> - MLX5_ASSERT(loc.pkts_sent >= loc.pkts_copy);
> - part = loc.pkts_sent - loc.pkts_copy;
> - if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
> - /*
> - * There are some single-segment mbufs not
> - * stored in elts. The mbufs must be in the
> - * same order as WQEs, so we must copy the
> - * mbufs to elts here, before the coming
> - * multi-segment packet mbufs is appended.
> - */
> - mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy,
> - part, olx);
> - loc.pkts_copy = loc.pkts_sent;
> - }
> - MLX5_ASSERT(pkts_n > loc.pkts_sent);
> - ret = mlx5_tx_burst_mseg(txq, pkts, pkts_n, &loc,
> olx);
> - if (!MLX5_TXOFF_CONFIG(INLINE))
> - loc.pkts_copy = loc.pkts_sent;
> - /*
> - * These returned code checks are supposed
> - * to be optimized out due to routine inlining.
> - */
> - if (ret == MLX5_TXCMP_CODE_EXIT) {
> - /*
> - * The routine returns this code when
> - * all packets are sent or there is no
> - * enough resources to complete request.
> - */
> - break;
> - }
> - if (ret == MLX5_TXCMP_CODE_ERROR) {
> - /*
> - * The routine returns this code when
> - * some error in the incoming packets
> - * format occurred.
> - */
> - txq->stats.oerrors++;
> - break;
> - }
> - if (ret == MLX5_TXCMP_CODE_SINGLE) {
> - /*
> - * The single-segment packet was
> encountered
> - * in the array, try to send it with the
> - * best optimized way, possible engaging
> eMPW.
> - */
> - goto enter_send_single;
> - }
> - if (MLX5_TXOFF_CONFIG(TSO) &&
> - ret == MLX5_TXCMP_CODE_TSO) {
> - /*
> - * The single-segment TSO packet was
> - * encountered in the array.
> - */
> - goto enter_send_tso;
> - }
> - /* We must not get here. Something is going wrong.
> */
> - MLX5_ASSERT(false);
> - txq->stats.oerrors++;
> - break;
> - }
> - /* Dedicated branch for single-segment TSO packets. */
> - if (MLX5_TXOFF_CONFIG(TSO) &&
> - unlikely(loc.mbuf->ol_flags & PKT_TX_TCP_SEG)) {
> - /*
> - * TSO might require special way for inlining
> - * (dedicated parameters) and is sent with
> - * MLX5_OPCODE_TSO opcode only, provide this
> - * in dedicated branch.
> - */
> -enter_send_tso:
> - MLX5_ASSERT(NB_SEGS(loc.mbuf) == 1);
> - MLX5_ASSERT(pkts_n > loc.pkts_sent);
> - ret = mlx5_tx_burst_tso(txq, pkts, pkts_n, &loc, olx);
> - /*
> - * These returned code checks are supposed
> - * to be optimized out due to routine inlining.
> - */
> - if (ret == MLX5_TXCMP_CODE_EXIT)
> - break;
> - if (ret == MLX5_TXCMP_CODE_ERROR) {
> - txq->stats.oerrors++;
> - break;
> - }
> - if (ret == MLX5_TXCMP_CODE_SINGLE)
> - goto enter_send_single;
> - if (MLX5_TXOFF_CONFIG(MULTI) &&
> - ret == MLX5_TXCMP_CODE_MULTI) {
> - /*
> - * The multi-segment packet was
> - * encountered in the array.
> - */
> - goto enter_send_multi;
> - }
> - /* We must not get here. Something is going wrong.
> */
> - MLX5_ASSERT(false);
> - txq->stats.oerrors++;
> - break;
> - }
> - /*
> - * The dedicated branch for the single-segment packets
> - * without TSO. Often these ones can be sent using
> - * MLX5_OPCODE_EMPW with multiple packets in one WQE.
> - * The routine builds the WQEs till it encounters
> - * the TSO or multi-segment packet (in case if these
> - * offloads are requested at SQ configuration time).
> - */
> -enter_send_single:
> - MLX5_ASSERT(pkts_n > loc.pkts_sent);
> - ret = mlx5_tx_burst_single(txq, pkts, pkts_n, &loc, olx);
> - /*
> - * These returned code checks are supposed
> - * to be optimized out due to routine inlining.
> - */
> - if (ret == MLX5_TXCMP_CODE_EXIT)
> - break;
> - if (ret == MLX5_TXCMP_CODE_ERROR) {
> - txq->stats.oerrors++;
> - break;
> - }
> - if (MLX5_TXOFF_CONFIG(MULTI) &&
> - ret == MLX5_TXCMP_CODE_MULTI) {
> - /*
> - * The multi-segment packet was
> - * encountered in the array.
> - */
> - goto enter_send_multi;
> - }
> - if (MLX5_TXOFF_CONFIG(TSO) &&
> - ret == MLX5_TXCMP_CODE_TSO) {
> - /*
> - * The single-segment TSO packet was
> - * encountered in the array.
> - */
> - goto enter_send_tso;
> - }
> - /* We must not get here. Something is going wrong. */
> - MLX5_ASSERT(false);
> - txq->stats.oerrors++;
> - break;
> - }
> - /*
> - * Main Tx loop is completed, do the rest:
> - * - set completion request if thresholds are reached
> - * - doorbell the hardware
> - * - copy the rest of mbufs to elts (if any)
> - */
> - MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE) ||
> - loc.pkts_sent >= loc.pkts_copy);
> - /* Take a shortcut if nothing is sent. */
> - if (unlikely(loc.pkts_sent == loc.pkts_loop))
> - goto burst_exit;
> - /* Request CQE generation if limits are reached. */
> - mlx5_tx_request_completion(txq, &loc, olx);
> - /*
> - * Ring QP doorbell immediately after WQE building completion
> - * to improve latencies. The pure software related data treatment
> - * can be completed after doorbell. Tx CQEs for this SQ are
> - * processed in this thread only by the polling.
> - *
> - * The rdma core library can map doorbell register in two ways,
> - * depending on the environment variable "MLX5_SHUT_UP_BF":
> - *
> - * - as regular cached memory, the variable is either missing or
> - * set to zero. This type of mapping may cause the significant
> - * doorbell register writing latency and requires explicit
> - * memory write barrier to mitigate this issue and prevent
> - * write combining.
> - *
> - * - as non-cached memory, the variable is present and set to
> - * not "0" value. This type of mapping may cause performance
> - * impact under heavy loading conditions but the explicit write
> - * memory barrier is not required and it may improve core
> - * performance.
> - *
> - * - the legacy behaviour (prior 19.08 release) was to use some
> - * heuristics to decide whether write memory barrier should
> - * be performed. This behavior is supported with specifying
> - * tx_db_nc=2, write barrier is skipped if application
> - * provides the full recommended burst of packets, it
> - * supposes the next packets are coming and the write barrier
> - * will be issued on the next burst (after descriptor writing,
> - * at least).
> - */
> - mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, !txq->db_nc &&
> - (!txq->db_heu || pkts_n %
> MLX5_TX_DEFAULT_BURST));
> - /* Not all of the mbufs may be stored into elts yet. */
> - part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent -
> loc.pkts_copy;
> - if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
> - /*
> - * There are some single-segment mbufs not stored in elts.
> - * It can be only if the last packet was single-segment.
> - * The copying is gathered into one place due to it is
> - * a good opportunity to optimize that with SIMD.
> - * Unfortunately if inlining is enabled the gaps in
> - * pointer array may happen due to early freeing of the
> - * inlined mbufs.
> - */
> - mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy, part, olx);
> - loc.pkts_copy = loc.pkts_sent;
> - }
> - MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq-
> >elts_tail));
> - MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq-
> >wqe_pi));
> - if (pkts_n > loc.pkts_sent) {
> - /*
> - * If burst size is large there might be no enough CQE
> - * fetched from completion queue and no enough resources
> - * freed to send all the packets.
> - */
> - goto send_loop;
> - }
> -burst_exit:
> -#ifdef MLX5_PMD_SOFT_COUNTERS
> - /* Increment sent packets counter. */
> - txq->stats.opackets += loc.pkts_sent;
> -#endif
> - if (MLX5_TXOFF_CONFIG(INLINE) && loc.mbuf_free)
> - __mlx5_tx_free_mbuf(txq, pkts, loc.mbuf_free, olx);
> - return loc.pkts_sent;
> -}
> -
> /* Generate routines with Enhanced Multi-Packet Write support. */
> MLX5_TXOFF_DECL(full_empw,
> MLX5_TXOFF_CONFIG_FULL |
> MLX5_TXOFF_CONFIG_EMPW)
> diff --git a/drivers/net/mlx5/mlx5_tx.h b/drivers/net/mlx5/mlx5_tx.h
> index 7f91d04..34843d4 100644
> --- a/drivers/net/mlx5/mlx5_tx.h
> +++ b/drivers/net/mlx5/mlx5_tx.h
> @@ -20,8 +20,64 @@
> #include "mlx5_autoconf.h"
> #include "mlx5_mr.h"
>
> +/* TX burst subroutines return codes. */
> +enum mlx5_txcmp_code {
> + MLX5_TXCMP_CODE_EXIT = 0,
> + MLX5_TXCMP_CODE_ERROR,
> + MLX5_TXCMP_CODE_SINGLE,
> + MLX5_TXCMP_CODE_MULTI,
> + MLX5_TXCMP_CODE_TSO,
> + MLX5_TXCMP_CODE_EMPW,
> +};
> +
> +/*
> + * These defines are used to configure Tx burst routine option set
> supported
> + * at compile time. The not specified options are optimized out due to if
> + * conditions can be explicitly calculated at compile time.
> + * The offloads with bigger runtime check (require more CPU cycles toskip)
> + * overhead should have the bigger index - this is needed to select the
> better
> + * matching routine function if no exact match and some offloads are not
> + * actually requested.
> + */
> +#define MLX5_TXOFF_CONFIG_MULTI (1u << 0) /* Multi-segment
> packets.*/
> +#define MLX5_TXOFF_CONFIG_TSO (1u << 1) /* TCP send offload
> supported.*/
> +#define MLX5_TXOFF_CONFIG_SWP (1u << 2) /* Tunnels/SW Parser
> offloads.*/
> +#define MLX5_TXOFF_CONFIG_CSUM (1u << 3) /* Check Sums offloaded.
> */
> +#define MLX5_TXOFF_CONFIG_INLINE (1u << 4) /* Data inlining supported.
> */
> +#define MLX5_TXOFF_CONFIG_VLAN (1u << 5) /* VLAN insertion
> supported.*/
> +#define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
> +#define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW
> supported.*/
> +#define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW
> supported.*/
> +#define MLX5_TXOFF_CONFIG_TXPP (1u << 10) /* Scheduling on
> timestamp.*/
> +
> +/* The most common offloads groups. */
> +#define MLX5_TXOFF_CONFIG_NONE 0
> +#define MLX5_TXOFF_CONFIG_FULL (MLX5_TXOFF_CONFIG_MULTI | \
> + MLX5_TXOFF_CONFIG_TSO | \
> + MLX5_TXOFF_CONFIG_SWP | \
> + MLX5_TXOFF_CONFIG_CSUM | \
> + MLX5_TXOFF_CONFIG_INLINE | \
> + MLX5_TXOFF_CONFIG_VLAN | \
> + MLX5_TXOFF_CONFIG_METADATA)
> +
> +#define MLX5_TXOFF_CONFIG(mask) (olx &
> MLX5_TXOFF_CONFIG_##mask)
> +
> +#define MLX5_TXOFF_DECL(func, olx) \
> +static uint16_t mlx5_tx_burst_##func(void *txq, \
> + struct rte_mbuf **pkts, \
> + uint16_t pkts_n) \
> +{ \
> + return mlx5_tx_burst_tmpl((struct mlx5_txq_data *)txq, \
> + pkts, pkts_n, (olx)); \
> +}
> +
> /* Mbuf dynamic flag offset for inline. */
> extern uint64_t rte_net_mlx5_dynf_inline_mask;
> +#define PKT_TX_DYNF_NOINLINE rte_net_mlx5_dynf_inline_mask
> +
> +extern uint32_t mlx5_ptype_table[] __rte_cache_aligned;
> +extern uint8_t mlx5_cksum_table[1 << 10] __rte_cache_aligned;
> +extern uint8_t mlx5_swp_types_table[1 << 10] __rte_cache_aligned;
>
> struct mlx5_txq_stats {
> #ifdef MLX5_PMD_SOFT_COUNTERS
> @@ -167,6 +223,8 @@ struct mlx5_txq_ctrl *mlx5_txq_hairpin_new
>
> uint16_t removed_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts,
> uint16_t pkts_n);
> +void mlx5_tx_handle_completion(struct mlx5_txq_data *__rte_restrict
> txq,
> + unsigned int olx __rte_unused);
> int mlx5_tx_descriptor_status(void *tx_queue, uint16_t offset);
> void mlx5_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
> struct rte_eth_txq_info *qinfo);
> @@ -368,4 +426,3250 @@ uint32_t mlx5_tx_update_ext_mp(struct
> mlx5_txq_data *txq, uintptr_t addr,
> return ci;
> }
>
> +/**
> + * Set Software Parser flags and offsets in Ethernet Segment of WQE.
> + * Flags must be preliminary initialized to zero.
> + *
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param swp_flags
> + * Pointer to store Software Parser flags.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * Software Parser offsets packed in dword.
> + * Software Parser flags are set by pointer.
> + */
> +static __rte_always_inline uint32_t
> +txq_mbuf_to_swp(struct mlx5_txq_local *__rte_restrict loc,
> + uint8_t *swp_flags,
> + unsigned int olx)
> +{
> + uint64_t ol, tunnel;
> + unsigned int idx, off;
> + uint32_t set;
> +
> + if (!MLX5_TXOFF_CONFIG(SWP))
> + return 0;
> + ol = loc->mbuf->ol_flags;
> + tunnel = ol & PKT_TX_TUNNEL_MASK;
> + /*
> + * Check whether Software Parser is required.
> + * Only customized tunnels may ask for.
> + */
> + if (likely(tunnel != PKT_TX_TUNNEL_UDP && tunnel !=
> PKT_TX_TUNNEL_IP))
> + return 0;
> + /*
> + * The index should have:
> + * bit[0:1] = PKT_TX_L4_MASK
> + * bit[4] = PKT_TX_IPV6
> + * bit[8] = PKT_TX_OUTER_IPV6
> + * bit[9] = PKT_TX_OUTER_UDP
> + */
> + idx = (ol & (PKT_TX_L4_MASK | PKT_TX_IPV6 |
> PKT_TX_OUTER_IPV6)) >> 52;
> + idx |= (tunnel == PKT_TX_TUNNEL_UDP) ? (1 << 9) : 0;
> + *swp_flags = mlx5_swp_types_table[idx];
> + /*
> + * Set offsets for SW parser. Since ConnectX-5, SW parser just
> + * complements HW parser. SW parser starts to engage only if HW
> parser
> + * can't reach a header. For the older devices, HW parser will not kick
> + * in if any of SWP offsets is set. Therefore, all of the L3 offsets
> + * should be set regardless of HW offload.
> + */
> + off = loc->mbuf->outer_l2_len;
> + if (MLX5_TXOFF_CONFIG(VLAN) && ol & PKT_TX_VLAN_PKT)
> + off += sizeof(struct rte_vlan_hdr);
> + set = (off >> 1) << 8; /* Outer L3 offset. */
> + off += loc->mbuf->outer_l3_len;
> + if (tunnel == PKT_TX_TUNNEL_UDP)
> + set |= off >> 1; /* Outer L4 offset. */
> + if (ol & (PKT_TX_IPV4 | PKT_TX_IPV6)) { /* Inner IP. */
> + const uint64_t csum = ol & PKT_TX_L4_MASK;
> + off += loc->mbuf->l2_len;
> + set |= (off >> 1) << 24; /* Inner L3 offset. */
> + if (csum == PKT_TX_TCP_CKSUM ||
> + csum == PKT_TX_UDP_CKSUM ||
> + (MLX5_TXOFF_CONFIG(TSO) && ol & PKT_TX_TCP_SEG)) {
> + off += loc->mbuf->l3_len;
> + set |= (off >> 1) << 16; /* Inner L4 offset. */
> + }
> + }
> + set = rte_cpu_to_le_32(set);
> + return set;
> +}
> +
> +/**
> + * Convert the Checksum offloads to Verbs.
> + *
> + * @param buf
> + * Pointer to the mbuf.
> + *
> + * @return
> + * Converted checksum flags.
> + */
> +static __rte_always_inline uint8_t
> +txq_ol_cksum_to_cs(struct rte_mbuf *buf)
> +{
> + uint32_t idx;
> + uint8_t is_tunnel = !!(buf->ol_flags & PKT_TX_TUNNEL_MASK);
> + const uint64_t ol_flags_mask = PKT_TX_TCP_SEG |
> PKT_TX_L4_MASK |
> + PKT_TX_IP_CKSUM |
> PKT_TX_OUTER_IP_CKSUM;
> +
> + /*
> + * The index should have:
> + * bit[0] = PKT_TX_TCP_SEG
> + * bit[2:3] = PKT_TX_UDP_CKSUM, PKT_TX_TCP_CKSUM
> + * bit[4] = PKT_TX_IP_CKSUM
> + * bit[8] = PKT_TX_OUTER_IP_CKSUM
> + * bit[9] = tunnel
> + */
> + idx = ((buf->ol_flags & ol_flags_mask) >> 50) | (!!is_tunnel << 9);
> + return mlx5_cksum_table[idx];
> +}
> +
> +/**
> + * Free the mbufs from the linear array of pointers.
> + *
> + * @param txq
> + * Pointer to Tx queue structure.
> + * @param pkts
> + * Pointer to array of packets to be free.
> + * @param pkts_n
> + * Number of packets to be freed.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + unsigned int pkts_n,
> + unsigned int olx __rte_unused)
> +{
> + struct rte_mempool *pool = NULL;
> + struct rte_mbuf **p_free = NULL;
> + struct rte_mbuf *mbuf;
> + unsigned int n_free = 0;
> +
> + /*
> + * The implemented algorithm eliminates
> + * copying pointers to temporary array
> + * for rte_mempool_put_bulk() calls.
> + */
> + MLX5_ASSERT(pkts);
> + MLX5_ASSERT(pkts_n);
> + /*
> + * Free mbufs directly to the pool in bulk
> + * if fast free offload is engaged
> + */
> + if (!MLX5_TXOFF_CONFIG(MULTI) && txq->fast_free) {
> + mbuf = *pkts;
> + pool = mbuf->pool;
> + rte_mempool_put_bulk(pool, (void *)pkts, pkts_n);
> + return;
> + }
> + for (;;) {
> + for (;;) {
> + /*
> + * Decrement mbuf reference counter, detach
> + * indirect and external buffers if needed.
> + */
> + mbuf = rte_pktmbuf_prefree_seg(*pkts);
> + if (likely(mbuf != NULL)) {
> + MLX5_ASSERT(mbuf == *pkts);
> + if (likely(n_free != 0)) {
> + if (unlikely(pool != mbuf->pool))
> + /* From different pool. */
> + break;
> + } else {
> + /* Start new scan array. */
> + pool = mbuf->pool;
> + p_free = pkts;
> + }
> + ++n_free;
> + ++pkts;
> + --pkts_n;
> + if (unlikely(pkts_n == 0)) {
> + mbuf = NULL;
> + break;
> + }
> + } else {
> + /*
> + * This happens if mbuf is still referenced.
> + * We can't put it back to the pool, skip.
> + */
> + ++pkts;
> + --pkts_n;
> + if (unlikely(n_free != 0))
> + /* There is some array to free.*/
> + break;
> + if (unlikely(pkts_n == 0))
> + /* Last mbuf, nothing to free. */
> + return;
> + }
> + }
> + for (;;) {
> + /*
> + * This loop is implemented to avoid multiple
> + * inlining of rte_mempool_put_bulk().
> + */
> + MLX5_ASSERT(pool);
> + MLX5_ASSERT(p_free);
> + MLX5_ASSERT(n_free);
> + /*
> + * Free the array of pre-freed mbufs
> + * belonging to the same memory pool.
> + */
> + rte_mempool_put_bulk(pool, (void *)p_free,
> n_free);
> + if (unlikely(mbuf != NULL)) {
> + /* There is the request to start new scan. */
> + pool = mbuf->pool;
> + p_free = pkts++;
> + n_free = 1;
> + --pkts_n;
> + if (likely(pkts_n != 0))
> + break;
> + /*
> + * This is the last mbuf to be freed.
> + * Do one more loop iteration to complete.
> + * This is rare case of the last unique mbuf.
> + */
> + mbuf = NULL;
> + continue;
> + }
> + if (likely(pkts_n == 0))
> + return;
> + n_free = 0;
> + break;
> + }
> + }
> +}
> +
> +/**
> + * No inline version to free buffers for optimal call
> + * on the tx_burst completion.
> + */
> +static __rte_noinline void
> +__mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + unsigned int pkts_n,
> + unsigned int olx __rte_unused)
> +{
> + mlx5_tx_free_mbuf(txq, pkts, pkts_n, olx);
> +}
> +
> +/**
> + * Free the mbuf from the elts ring buffer till new tail.
> + *
> + * @param txq
> + * Pointer to Tx queue structure.
> + * @param tail
> + * Index in elts to free up to, becomes new elts tail.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_free_elts(struct mlx5_txq_data *__rte_restrict txq,
> + uint16_t tail,
> + unsigned int olx __rte_unused)
> +{
> + uint16_t n_elts = tail - txq->elts_tail;
> +
> + MLX5_ASSERT(n_elts);
> + MLX5_ASSERT(n_elts <= txq->elts_s);
> + /*
> + * Implement a loop to support ring buffer wraparound
> + * with single inlining of mlx5_tx_free_mbuf().
> + */
> + do {
> + unsigned int part;
> +
> + part = txq->elts_s - (txq->elts_tail & txq->elts_m);
> + part = RTE_MIN(part, n_elts);
> + MLX5_ASSERT(part);
> + MLX5_ASSERT(part <= txq->elts_s);
> + mlx5_tx_free_mbuf(txq,
> + &txq->elts[txq->elts_tail & txq->elts_m],
> + part, olx);
> + txq->elts_tail += part;
> + n_elts -= part;
> + } while (n_elts);
> +}
> +
> +/**
> + * Store the mbuf being sent into elts ring buffer.
> + * On Tx completion these mbufs will be freed.
> + *
> + * @param txq
> + * Pointer to Tx queue structure.
> + * @param pkts
> + * Pointer to array of packets to be stored.
> + * @param pkts_n
> + * Number of packets to be stored.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_copy_elts(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + unsigned int pkts_n,
> + unsigned int olx __rte_unused)
> +{
> + unsigned int part;
> + struct rte_mbuf **elts = (struct rte_mbuf **)txq->elts;
> +
> + MLX5_ASSERT(pkts);
> + MLX5_ASSERT(pkts_n);
> + part = txq->elts_s - (txq->elts_head & txq->elts_m);
> + MLX5_ASSERT(part);
> + MLX5_ASSERT(part <= txq->elts_s);
> + /* This code is a good candidate for vectorizing with SIMD. */
> + rte_memcpy((void *)(elts + (txq->elts_head & txq->elts_m)),
> + (void *)pkts,
> + RTE_MIN(part, pkts_n) * sizeof(struct rte_mbuf *));
> + txq->elts_head += pkts_n;
> + if (unlikely(part < pkts_n))
> + /* The copy is wrapping around the elts array. */
> + rte_memcpy((void *)elts, (void *)(pkts + part),
> + (pkts_n - part) * sizeof(struct rte_mbuf *));
> +}
> +
> +/**
> + * Check if the completion request flag should be set in the last WQE.
> + * Both pushed mbufs and WQEs are monitored and the completion
> request
> + * flag is set if any of thresholds is reached.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_request_completion(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + uint16_t head = txq->elts_head;
> + unsigned int part;
> +
> + part = MLX5_TXOFF_CONFIG(INLINE) ?
> + 0 : loc->pkts_sent - loc->pkts_copy;
> + head += part;
> + if ((uint16_t)(head - txq->elts_comp) >= MLX5_TX_COMP_THRESH
> ||
> + (MLX5_TXOFF_CONFIG(INLINE) &&
> + (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
> + volatile struct mlx5_wqe *last = loc->wqe_last;
> +
> + MLX5_ASSERT(last);
> + txq->elts_comp = head;
> + if (MLX5_TXOFF_CONFIG(INLINE))
> + txq->wqe_comp = txq->wqe_ci;
> + /* Request unconditional completion on last WQE. */
> + last->cseg.flags = RTE_BE32(MLX5_COMP_ALWAYS <<
> + MLX5_COMP_MODE_OFFSET);
> + /* Save elts_head in dedicated free on completion queue. */
> +#ifdef RTE_LIBRTE_MLX5_DEBUG
> + txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head |
> + (last->cseg.opcode >> 8) << 16;
> +#else
> + txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head;
> +#endif
> + /* A CQE slot must always be available. */
> + MLX5_ASSERT((txq->cq_pi - txq->cq_ci) <= txq->cqe_s);
> + }
> +}
> +
> +/**
> + * Build the Control Segment with specified opcode:
> + * - MLX5_OPCODE_SEND
> + * - MLX5_OPCODE_ENHANCED_MPSW
> + * - MLX5_OPCODE_TSO
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param wqe
> + * Pointer to WQE to fill with built Control Segment.
> + * @param ds
> + * Supposed length of WQE in segments.
> + * @param opcode
> + * SQ WQE opcode to put into Control Segment.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_cseg_init(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc __rte_unused,
> + struct mlx5_wqe *__rte_restrict wqe,
> + unsigned int ds,
> + unsigned int opcode,
> + unsigned int olx __rte_unused)
> +{
> + struct mlx5_wqe_cseg *__rte_restrict cs = &wqe->cseg;
> +
> + /* For legacy MPW replace the EMPW by TSO with modifier. */
> + if (MLX5_TXOFF_CONFIG(MPW) && opcode ==
> MLX5_OPCODE_ENHANCED_MPSW)
> + opcode = MLX5_OPCODE_TSO | MLX5_OPC_MOD_MPW <<
> 24;
> + cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
> + cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
> + cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
> + MLX5_COMP_MODE_OFFSET);
> + cs->misc = RTE_BE32(0);
> +}
> +
> +/**
> + * Build the Synchronize Queue Segment with specified completion index.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param wqe
> + * Pointer to WQE to fill with built Control Segment.
> + * @param wci
> + * Completion index in Clock Queue to wait.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_wseg_init(struct mlx5_txq_data *restrict txq,
> + struct mlx5_txq_local *restrict loc __rte_unused,
> + struct mlx5_wqe *restrict wqe,
> + unsigned int wci,
> + unsigned int olx __rte_unused)
> +{
> + struct mlx5_wqe_qseg *qs;
> +
> + qs = RTE_PTR_ADD(wqe, MLX5_WSEG_SIZE);
> + qs->max_index = rte_cpu_to_be_32(wci);
> + qs->qpn_cqn = rte_cpu_to_be_32(txq->sh-
> >txpp.clock_queue.cq_obj.cq->id);
> + qs->reserved0 = RTE_BE32(0);
> + qs->reserved1 = RTE_BE32(0);
> +}
> +
> +/**
> + * Build the Ethernet Segment without inlined data.
> + * Supports Software Parser, Checksums and VLAN insertion Tx offload
> features.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param wqe
> + * Pointer to WQE to fill with built Ethernet Segment.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_eseg_none(struct mlx5_txq_data *__rte_restrict txq
> __rte_unused,
> + struct mlx5_txq_local *__rte_restrict loc,
> + struct mlx5_wqe *__rte_restrict wqe,
> + unsigned int olx)
> +{
> + struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
> + uint32_t csum;
> +
> + /*
> + * Calculate and set check sum flags first, dword field
> + * in segment may be shared with Software Parser flags.
> + */
> + csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc-
> >mbuf) : 0;
> + es->flags = rte_cpu_to_le_32(csum);
> + /*
> + * Calculate and set Software Parser offsets and flags.
> + * These flags a set for custom UDP and IP tunnel packets.
> + */
> + es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
> + /* Fill metadata field if needed. */
> + es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
> + loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
> + *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
> + /* Engage VLAN tag insertion feature if requested. */
> + if (MLX5_TXOFF_CONFIG(VLAN) &&
> + loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
> + /*
> + * We should get here only if device support
> + * this feature correctly.
> + */
> + MLX5_ASSERT(txq->vlan_en);
> + es->inline_hdr =
> rte_cpu_to_be_32(MLX5_ETH_WQE_VLAN_INSERT |
> + loc->mbuf->vlan_tci);
> + } else {
> + es->inline_hdr = RTE_BE32(0);
> + }
> +}
> +
> +/**
> + * Build the Ethernet Segment with minimal inlined data
> + * of MLX5_ESEG_MIN_INLINE_SIZE bytes length. This is
> + * used to fill the gap in single WQEBB WQEs.
> + * Supports Software Parser, Checksums and VLAN
> + * insertion Tx offload features.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param wqe
> + * Pointer to WQE to fill with built Ethernet Segment.
> + * @param vlan
> + * Length of VLAN tag insertion if any.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_eseg_dmin(struct mlx5_txq_data *__rte_restrict txq
> __rte_unused,
> + struct mlx5_txq_local *__rte_restrict loc,
> + struct mlx5_wqe *__rte_restrict wqe,
> + unsigned int vlan,
> + unsigned int olx)
> +{
> + struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
> + uint32_t csum;
> + uint8_t *psrc, *pdst;
> +
> + /*
> + * Calculate and set check sum flags first, dword field
> + * in segment may be shared with Software Parser flags.
> + */
> + csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc-
> >mbuf) : 0;
> + es->flags = rte_cpu_to_le_32(csum);
> + /*
> + * Calculate and set Software Parser offsets and flags.
> + * These flags a set for custom UDP and IP tunnel packets.
> + */
> + es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
> + /* Fill metadata field if needed. */
> + es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
> + loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
> + *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
> + psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
> + es->inline_hdr_sz = RTE_BE16(MLX5_ESEG_MIN_INLINE_SIZE);
> + es->inline_data = *(unaligned_uint16_t *)psrc;
> + psrc += sizeof(uint16_t);
> + pdst = (uint8_t *)(es + 1);
> + if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
> + /* Implement VLAN tag insertion as part inline data. */
> + memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN -
> sizeof(uint16_t));
> + pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
> + psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
> + /* Insert VLAN ethertype + VLAN tag. */
> + *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
> + ((RTE_ETHER_TYPE_VLAN <<
> 16) |
> + loc->mbuf->vlan_tci);
> + pdst += sizeof(struct rte_vlan_hdr);
> + /* Copy the rest two bytes from packet data. */
> + MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst,
> sizeof(uint16_t)));
> + *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
> + } else {
> + /* Fill the gap in the title WQEBB with inline data. */
> + rte_mov16(pdst, psrc);
> + }
> +}
> +
> +/**
> + * Build the Ethernet Segment with entire packet data inlining. Checks the
> + * boundary of WQEBB and ring buffer wrapping, supports Software Parser,
> + * Checksums and VLAN insertion Tx offload features.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param wqe
> + * Pointer to WQE to fill with built Ethernet Segment.
> + * @param vlan
> + * Length of VLAN tag insertion if any.
> + * @param inlen
> + * Length of data to inline (VLAN included, if any).
> + * @param tso
> + * TSO flag, set mss field from the packet.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * Pointer to the next Data Segment (aligned and wrapped around).
> + */
> +static __rte_always_inline struct mlx5_wqe_dseg *
> +mlx5_tx_eseg_data(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + struct mlx5_wqe *__rte_restrict wqe,
> + unsigned int vlan,
> + unsigned int inlen,
> + unsigned int tso,
> + unsigned int olx)
> +{
> + struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
> + uint32_t csum;
> + uint8_t *psrc, *pdst;
> + unsigned int part;
> +
> + /*
> + * Calculate and set check sum flags first, dword field
> + * in segment may be shared with Software Parser flags.
> + */
> + csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc-
> >mbuf) : 0;
> + if (tso) {
> + csum <<= 24;
> + csum |= loc->mbuf->tso_segsz;
> + es->flags = rte_cpu_to_be_32(csum);
> + } else {
> + es->flags = rte_cpu_to_le_32(csum);
> + }
> + /*
> + * Calculate and set Software Parser offsets and flags.
> + * These flags a set for custom UDP and IP tunnel packets.
> + */
> + es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
> + /* Fill metadata field if needed. */
> + es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
> + loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
> + *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
> + psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
> + es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
> + es->inline_data = *(unaligned_uint16_t *)psrc;
> + psrc += sizeof(uint16_t);
> + pdst = (uint8_t *)(es + 1);
> + if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
> + /* Implement VLAN tag insertion as part inline data. */
> + memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN -
> sizeof(uint16_t));
> + pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
> + psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
> + /* Insert VLAN ethertype + VLAN tag. */
> + *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
> + ((RTE_ETHER_TYPE_VLAN <<
> 16) |
> + loc->mbuf->vlan_tci);
> + pdst += sizeof(struct rte_vlan_hdr);
> + /* Copy the rest two bytes from packet data. */
> + MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst,
> sizeof(uint16_t)));
> + *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
> + psrc += sizeof(uint16_t);
> + } else {
> + /* Fill the gap in the title WQEBB with inline data. */
> + rte_mov16(pdst, psrc);
> + psrc += sizeof(rte_v128u32_t);
> + }
> + pdst = (uint8_t *)(es + 2);
> + MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
> + MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
> + inlen -= MLX5_ESEG_MIN_INLINE_SIZE;
> + if (!inlen) {
> + MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst,
> MLX5_WSEG_SIZE));
> + return (struct mlx5_wqe_dseg *)pdst;
> + }
> + /*
> + * The WQEBB space availability is checked by caller.
> + * Here we should be aware of WQE ring buffer wraparound only.
> + */
> + part = (uint8_t *)txq->wqes_end - pdst;
> + part = RTE_MIN(part, inlen);
> + do {
> + rte_memcpy(pdst, psrc, part);
> + inlen -= part;
> + if (likely(!inlen)) {
> + /*
> + * If return value is not used by the caller
> + * the code below will be optimized out.
> + */
> + pdst += part;
> + pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
> + if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
> + pdst = (uint8_t *)txq->wqes;
> + return (struct mlx5_wqe_dseg *)pdst;
> + }
> + pdst = (uint8_t *)txq->wqes;
> + psrc += part;
> + part = inlen;
> + } while (true);
> +}
> +
> +/**
> + * Copy data from chain of mbuf to the specified linear buffer.
> + * Checksums and VLAN insertion Tx offload features. If data
> + * from some mbuf copied completely this mbuf is freed. Local
> + * structure is used to keep the byte stream state.
> + *
> + * @param pdst
> + * Pointer to the destination linear buffer.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param len
> + * Length of data to be copied.
> + * @param must
> + * Length of data to be copied ignoring no inline hint.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * Number of actual copied data bytes. This is always greater than or
> + * equal to must parameter and might be lesser than len in no inline
> + * hint flag is encountered.
> + */
> +static __rte_always_inline unsigned int
> +mlx5_tx_mseg_memcpy(uint8_t *pdst,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int len,
> + unsigned int must,
> + unsigned int olx __rte_unused)
> +{
> + struct rte_mbuf *mbuf;
> + unsigned int part, dlen, copy = 0;
> + uint8_t *psrc;
> +
> + MLX5_ASSERT(len);
> + MLX5_ASSERT(must <= len);
> + do {
> + /* Allow zero length packets, must check first. */
> + dlen = rte_pktmbuf_data_len(loc->mbuf);
> + if (dlen <= loc->mbuf_off) {
> + /* Exhausted packet, just free. */
> + mbuf = loc->mbuf;
> + loc->mbuf = mbuf->next;
> + rte_pktmbuf_free_seg(mbuf);
> + loc->mbuf_off = 0;
> + MLX5_ASSERT(loc->mbuf_nseg > 1);
> + MLX5_ASSERT(loc->mbuf);
> + --loc->mbuf_nseg;
> + if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
> + unsigned int diff;
> +
> + if (copy >= must) {
> + /*
> + * We already copied the minimal
> + * requested amount of data.
> + */
> + return copy;
> + }
> + diff = must - copy;
> + if (diff <= rte_pktmbuf_data_len(loc->mbuf))
> {
> + /*
> + * Copy only the minimal required
> + * part of the data buffer.
> + */
> + len = diff;
> + }
> + }
> + continue;
> + }
> + dlen -= loc->mbuf_off;
> + psrc = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
> + loc->mbuf_off);
> + part = RTE_MIN(len, dlen);
> + rte_memcpy(pdst, psrc, part);
> + copy += part;
> + loc->mbuf_off += part;
> + len -= part;
> + if (!len) {
> + if (loc->mbuf_off >= rte_pktmbuf_data_len(loc-
> >mbuf)) {
> + loc->mbuf_off = 0;
> + /* Exhausted packet, just free. */
> + mbuf = loc->mbuf;
> + loc->mbuf = mbuf->next;
> + rte_pktmbuf_free_seg(mbuf);
> + loc->mbuf_off = 0;
> + MLX5_ASSERT(loc->mbuf_nseg >= 1);
> + --loc->mbuf_nseg;
> + }
> + return copy;
> + }
> + pdst += part;
> + } while (true);
> +}
> +
> +/**
> + * Build the Ethernet Segment with inlined data from multi-segment packet.
> + * Checks the boundary of WQEBB and ring buffer wrapping, supports
> Software
> + * Parser, Checksums and VLAN insertion Tx offload features.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param wqe
> + * Pointer to WQE to fill with built Ethernet Segment.
> + * @param vlan
> + * Length of VLAN tag insertion if any.
> + * @param inlen
> + * Length of data to inline (VLAN included, if any).
> + * @param tso
> + * TSO flag, set mss field from the packet.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * Pointer to the next Data Segment (aligned and possible NOT wrapped
> + * around - caller should do wrapping check on its own).
> + */
> +static __rte_always_inline struct mlx5_wqe_dseg *
> +mlx5_tx_eseg_mdat(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + struct mlx5_wqe *__rte_restrict wqe,
> + unsigned int vlan,
> + unsigned int inlen,
> + unsigned int tso,
> + unsigned int olx)
> +{
> + struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
> + uint32_t csum;
> + uint8_t *pdst;
> + unsigned int part, tlen = 0;
> +
> + /*
> + * Calculate and set check sum flags first, uint32_t field
> + * in segment may be shared with Software Parser flags.
> + */
> + csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc-
> >mbuf) : 0;
> + if (tso) {
> + csum <<= 24;
> + csum |= loc->mbuf->tso_segsz;
> + es->flags = rte_cpu_to_be_32(csum);
> + } else {
> + es->flags = rte_cpu_to_le_32(csum);
> + }
> + /*
> + * Calculate and set Software Parser offsets and flags.
> + * These flags a set for custom UDP and IP tunnel packets.
> + */
> + es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
> + /* Fill metadata field if needed. */
> + es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
> + loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
> + *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
> + MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
> + pdst = (uint8_t *)&es->inline_data;
> + if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
> + /* Implement VLAN tag insertion as part inline data. */
> + mlx5_tx_mseg_memcpy(pdst, loc,
> + 2 * RTE_ETHER_ADDR_LEN,
> + 2 * RTE_ETHER_ADDR_LEN, olx);
> + pdst += 2 * RTE_ETHER_ADDR_LEN;
> + *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
> + ((RTE_ETHER_TYPE_VLAN <<
> 16) |
> + loc->mbuf->vlan_tci);
> + pdst += sizeof(struct rte_vlan_hdr);
> + tlen += 2 * RTE_ETHER_ADDR_LEN + sizeof(struct
> rte_vlan_hdr);
> + }
> + MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
> + /*
> + * The WQEBB space availability is checked by caller.
> + * Here we should be aware of WQE ring buffer wraparound only.
> + */
> + part = (uint8_t *)txq->wqes_end - pdst;
> + part = RTE_MIN(part, inlen - tlen);
> + MLX5_ASSERT(part);
> + do {
> + unsigned int copy;
> +
> + /*
> + * Copying may be interrupted inside the routine
> + * if run into no inline hint flag.
> + */
> + copy = tlen >= txq->inlen_mode ? 0 : (txq->inlen_mode -
> tlen);
> + copy = mlx5_tx_mseg_memcpy(pdst, loc, part, copy, olx);
> + tlen += copy;
> + if (likely(inlen <= tlen) || copy < part) {
> + es->inline_hdr_sz = rte_cpu_to_be_16(tlen);
> + pdst += copy;
> + pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
> + return (struct mlx5_wqe_dseg *)pdst;
> + }
> + pdst = (uint8_t *)txq->wqes;
> + part = inlen - tlen;
> + } while (true);
> +}
> +
> +/**
> + * Build the Data Segment of pointer type.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param dseg
> + * Pointer to WQE to fill with built Data Segment.
> + * @param buf
> + * Data buffer to point.
> + * @param len
> + * Data buffer length.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_dseg_ptr(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + struct mlx5_wqe_dseg *__rte_restrict dseg,
> + uint8_t *buf,
> + unsigned int len,
> + unsigned int olx __rte_unused)
> +
> +{
> + MLX5_ASSERT(len);
> + dseg->bcount = rte_cpu_to_be_32(len);
> + dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
> + dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
> +}
> +
> +/**
> + * Build the Data Segment of pointer type or inline if data length is less than
> + * buffer in minimal Data Segment size.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param dseg
> + * Pointer to WQE to fill with built Data Segment.
> + * @param buf
> + * Data buffer to point.
> + * @param len
> + * Data buffer length.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + */
> +static __rte_always_inline void
> +mlx5_tx_dseg_iptr(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + struct mlx5_wqe_dseg *__rte_restrict dseg,
> + uint8_t *buf,
> + unsigned int len,
> + unsigned int olx __rte_unused)
> +
> +{
> + uintptr_t dst, src;
> +
> + MLX5_ASSERT(len);
> + if (len > MLX5_DSEG_MIN_INLINE_SIZE) {
> + dseg->bcount = rte_cpu_to_be_32(len);
> + dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
> + dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
> +
> + return;
> + }
> + dseg->bcount = rte_cpu_to_be_32(len |
> MLX5_ETH_WQE_DATA_INLINE);
> + /* Unrolled implementation of generic rte_memcpy. */
> + dst = (uintptr_t)&dseg->inline_data[0];
> + src = (uintptr_t)buf;
> + if (len & 0x08) {
> +#ifdef RTE_ARCH_STRICT_ALIGN
> + MLX5_ASSERT(dst == RTE_PTR_ALIGN(dst,
> sizeof(uint32_t)));
> + *(uint32_t *)dst = *(unaligned_uint32_t *)src;
> + dst += sizeof(uint32_t);
> + src += sizeof(uint32_t);
> + *(uint32_t *)dst = *(unaligned_uint32_t *)src;
> + dst += sizeof(uint32_t);
> + src += sizeof(uint32_t);
> +#else
> + *(uint64_t *)dst = *(unaligned_uint64_t *)src;
> + dst += sizeof(uint64_t);
> + src += sizeof(uint64_t);
> +#endif
> + }
> + if (len & 0x04) {
> + *(uint32_t *)dst = *(unaligned_uint32_t *)src;
> + dst += sizeof(uint32_t);
> + src += sizeof(uint32_t);
> + }
> + if (len & 0x02) {
> + *(uint16_t *)dst = *(unaligned_uint16_t *)src;
> + dst += sizeof(uint16_t);
> + src += sizeof(uint16_t);
> + }
> + if (len & 0x01)
> + *(uint8_t *)dst = *(uint8_t *)src;
> +}
> +
> +/**
> + * Build the Data Segment of inlined data from single
> + * segment packet, no VLAN insertion.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param dseg
> + * Pointer to WQE to fill with built Data Segment.
> + * @param buf
> + * Data buffer to point.
> + * @param len
> + * Data buffer length.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * Pointer to the next Data Segment after inlined data.
> + * Ring buffer wraparound check is needed. We do not do it here because
> it
> + * may not be needed for the last packet in the eMPW session.
> + */
> +static __rte_always_inline struct mlx5_wqe_dseg *
> +mlx5_tx_dseg_empw(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc __rte_unused,
> + struct mlx5_wqe_dseg *__rte_restrict dseg,
> + uint8_t *buf,
> + unsigned int len,
> + unsigned int olx __rte_unused)
> +{
> + unsigned int part;
> + uint8_t *pdst;
> +
> + if (!MLX5_TXOFF_CONFIG(MPW)) {
> + /* Store the descriptor byte counter for eMPW sessions. */
> + dseg->bcount = rte_cpu_to_be_32(len |
> MLX5_ETH_WQE_DATA_INLINE);
> + pdst = &dseg->inline_data[0];
> + } else {
> + /* The entire legacy MPW session counter is stored on close.
> */
> + pdst = (uint8_t *)dseg;
> + }
> + /*
> + * The WQEBB space availability is checked by caller.
> + * Here we should be aware of WQE ring buffer wraparound only.
> + */
> + part = (uint8_t *)txq->wqes_end - pdst;
> + part = RTE_MIN(part, len);
> + do {
> + rte_memcpy(pdst, buf, part);
> + len -= part;
> + if (likely(!len)) {
> + pdst += part;
> + if (!MLX5_TXOFF_CONFIG(MPW))
> + pdst = RTE_PTR_ALIGN(pdst,
> MLX5_WSEG_SIZE);
> + /* Note: no final wraparound check here. */
> + return (struct mlx5_wqe_dseg *)pdst;
> + }
> + pdst = (uint8_t *)txq->wqes;
> + buf += part;
> + part = len;
> + } while (true);
> +}
> +
> +/**
> + * Build the Data Segment of inlined data from single
> + * segment packet with VLAN insertion.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param dseg
> + * Pointer to the dseg fill with built Data Segment.
> + * @param buf
> + * Data buffer to point.
> + * @param len
> + * Data buffer length.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * Pointer to the next Data Segment after inlined data.
> + * Ring buffer wraparound check is needed.
> + */
> +static __rte_always_inline struct mlx5_wqe_dseg *
> +mlx5_tx_dseg_vlan(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc __rte_unused,
> + struct mlx5_wqe_dseg *__rte_restrict dseg,
> + uint8_t *buf,
> + unsigned int len,
> + unsigned int olx __rte_unused)
> +
> +{
> + unsigned int part;
> + uint8_t *pdst;
> +
> + MLX5_ASSERT(len > MLX5_ESEG_MIN_INLINE_SIZE);
> + if (!MLX5_TXOFF_CONFIG(MPW)) {
> + /* Store the descriptor byte counter for eMPW sessions. */
> + dseg->bcount = rte_cpu_to_be_32
> + ((len + sizeof(struct rte_vlan_hdr)) |
> + MLX5_ETH_WQE_DATA_INLINE);
> + pdst = &dseg->inline_data[0];
> + } else {
> + /* The entire legacy MPW session counter is stored on close.
> */
> + pdst = (uint8_t *)dseg;
> + }
> + memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
> + buf += MLX5_DSEG_MIN_INLINE_SIZE;
> + pdst += MLX5_DSEG_MIN_INLINE_SIZE;
> + len -= MLX5_DSEG_MIN_INLINE_SIZE;
> + /* Insert VLAN ethertype + VLAN tag. Pointer is aligned. */
> + MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
> + if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
> + pdst = (uint8_t *)txq->wqes;
> + *(uint32_t *)pdst = rte_cpu_to_be_32((RTE_ETHER_TYPE_VLAN <<
> 16) |
> + loc->mbuf->vlan_tci);
> + pdst += sizeof(struct rte_vlan_hdr);
> + /*
> + * The WQEBB space availability is checked by caller.
> + * Here we should be aware of WQE ring buffer wraparound only.
> + */
> + part = (uint8_t *)txq->wqes_end - pdst;
> + part = RTE_MIN(part, len);
> + do {
> + rte_memcpy(pdst, buf, part);
> + len -= part;
> + if (likely(!len)) {
> + pdst += part;
> + if (!MLX5_TXOFF_CONFIG(MPW))
> + pdst = RTE_PTR_ALIGN(pdst,
> MLX5_WSEG_SIZE);
> + /* Note: no final wraparound check here. */
> + return (struct mlx5_wqe_dseg *)pdst;
> + }
> + pdst = (uint8_t *)txq->wqes;
> + buf += part;
> + part = len;
> + } while (true);
> +}
> +
> +/**
> + * Build the Ethernet Segment with optionally inlined data with
> + * VLAN insertion and following Data Segments (if any) from
> + * multi-segment packet. Used by ordinary send and TSO.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param wqe
> + * Pointer to WQE to fill with built Ethernet/Data Segments.
> + * @param vlan
> + * Length of VLAN header to insert, 0 means no VLAN insertion.
> + * @param inlen
> + * Data length to inline. For TSO this parameter specifies exact value,
> + * for ordinary send routine can be aligned by caller to provide better WQE
> + * space saving and data buffer start address alignment.
> + * This length includes VLAN header being inserted.
> + * @param tso
> + * Zero means ordinary send, inlined data can be extended,
> + * otherwise this is TSO, inlined data length is fixed.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * Actual size of built WQE in segments.
> + */
> +static __rte_always_inline unsigned int
> +mlx5_tx_mseg_build(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + struct mlx5_wqe *__rte_restrict wqe,
> + unsigned int vlan,
> + unsigned int inlen,
> + unsigned int tso,
> + unsigned int olx __rte_unused)
> +{
> + struct mlx5_wqe_dseg *__rte_restrict dseg;
> + unsigned int ds;
> +
> + MLX5_ASSERT((rte_pktmbuf_pkt_len(loc->mbuf) + vlan) >= inlen);
> + loc->mbuf_nseg = NB_SEGS(loc->mbuf);
> + loc->mbuf_off = 0;
> +
> + dseg = mlx5_tx_eseg_mdat(txq, loc, wqe, vlan, inlen, tso, olx);
> + if (!loc->mbuf_nseg)
> + goto dseg_done;
> + /*
> + * There are still some mbuf remaining, not inlined.
> + * The first mbuf may be partially inlined and we
> + * must process the possible non-zero data offset.
> + */
> + if (loc->mbuf_off) {
> + unsigned int dlen;
> + uint8_t *dptr;
> +
> + /*
> + * Exhausted packets must be dropped before.
> + * Non-zero offset means there are some data
> + * remained in the packet.
> + */
> + MLX5_ASSERT(loc->mbuf_off < rte_pktmbuf_data_len(loc-
> >mbuf));
> + MLX5_ASSERT(rte_pktmbuf_data_len(loc->mbuf));
> + dptr = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
> + loc->mbuf_off);
> + dlen = rte_pktmbuf_data_len(loc->mbuf) - loc->mbuf_off;
> + /*
> + * Build the pointer/minimal Data Segment.
> + * Do ring buffer wrapping check in advance.
> + */
> + if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> + dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> + mlx5_tx_dseg_iptr(txq, loc, dseg, dptr, dlen, olx);
> + /* Store the mbuf to be freed on completion. */
> + MLX5_ASSERT(loc->elts_free);
> + txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
> + --loc->elts_free;
> + ++dseg;
> + if (--loc->mbuf_nseg == 0)
> + goto dseg_done;
> + loc->mbuf = loc->mbuf->next;
> + loc->mbuf_off = 0;
> + }
> + do {
> + if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
> + struct rte_mbuf *mbuf;
> +
> + /* Zero length segment found, just skip. */
> + mbuf = loc->mbuf;
> + loc->mbuf = loc->mbuf->next;
> + rte_pktmbuf_free_seg(mbuf);
> + if (--loc->mbuf_nseg == 0)
> + break;
> + } else {
> + if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> + dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> + mlx5_tx_dseg_iptr
> + (txq, loc, dseg,
> + rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
> + rte_pktmbuf_data_len(loc->mbuf), olx);
> + MLX5_ASSERT(loc->elts_free);
> + txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> + --loc->elts_free;
> + ++dseg;
> + if (--loc->mbuf_nseg == 0)
> + break;
> + loc->mbuf = loc->mbuf->next;
> + }
> + } while (true);
> +
> +dseg_done:
> + /* Calculate actual segments used from the dseg pointer. */
> + if ((uintptr_t)wqe < (uintptr_t)dseg)
> + ds = ((uintptr_t)dseg - (uintptr_t)wqe) / MLX5_WSEG_SIZE;
> + else
> + ds = (((uintptr_t)dseg - (uintptr_t)wqe) +
> + txq->wqe_s * MLX5_WQE_SIZE) / MLX5_WSEG_SIZE;
> + return ds;
> +}
> +
> +/**
> + * The routine checks timestamp flag in the current packet,
> + * and push WAIT WQE into the queue if scheduling is required.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> + * MLX5_TXCMP_CODE_SINGLE - continue processing with the packet.
> + * MLX5_TXCMP_CODE_MULTI - the WAIT inserted, continue processing.
> + * Local context variables partially updated.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_schedule_send(struct mlx5_txq_data *restrict txq,
> + struct mlx5_txq_local *restrict loc,
> + unsigned int olx)
> +{
> + if (MLX5_TXOFF_CONFIG(TXPP) &&
> + loc->mbuf->ol_flags & txq->ts_mask) {
> + struct mlx5_wqe *wqe;
> + uint64_t ts;
> + int32_t wci;
> +
> + /*
> + * Estimate the required space quickly and roughly.
> + * We would like to ensure the packet can be pushed
> + * to the queue and we won't get the orphan WAIT WQE.
> + */
> + if (loc->wqe_free <= MLX5_WQE_SIZE_MAX /
> MLX5_WQE_SIZE ||
> + loc->elts_free < NB_SEGS(loc->mbuf))
> + return MLX5_TXCMP_CODE_EXIT;
> + /* Convert the timestamp into completion to wait. */
> + ts = *RTE_MBUF_DYNFIELD(loc->mbuf, txq->ts_offset,
> uint64_t *);
> + wci = mlx5_txpp_convert_tx_ts(txq->sh, ts);
> + if (unlikely(wci < 0))
> + return MLX5_TXCMP_CODE_SINGLE;
> + /* Build the WAIT WQE with specified completion. */
> + wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> + mlx5_tx_cseg_init(txq, loc, wqe, 2, MLX5_OPCODE_WAIT,
> olx);
> + mlx5_tx_wseg_init(txq, loc, wqe, wci, olx);
> + ++txq->wqe_ci;
> + --loc->wqe_free;
> + return MLX5_TXCMP_CODE_MULTI;
> + }
> + return MLX5_TXCMP_CODE_SINGLE;
> +}
> +
> +/**
> + * Tx one packet function for multi-segment TSO. Supports all
> + * types of Tx offloads, uses MLX5_OPCODE_TSO to build WQEs,
> + * sends one packet per WQE.
> + *
> + * This routine is responsible for storing processed mbuf
> + * into elts ring buffer and update elts_head.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> + * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> + * Local context variables partially updated.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_packet_multi_tso(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + struct mlx5_wqe *__rte_restrict wqe;
> + unsigned int ds, dlen, inlen, ntcp, vlan = 0;
> +
> + if (MLX5_TXOFF_CONFIG(TXPP)) {
> + enum mlx5_txcmp_code wret;
> +
> + /* Generate WAIT for scheduling if requested. */
> + wret = mlx5_tx_schedule_send(txq, loc, olx);
> + if (wret == MLX5_TXCMP_CODE_EXIT)
> + return MLX5_TXCMP_CODE_EXIT;
> + if (wret == MLX5_TXCMP_CODE_ERROR)
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + /*
> + * Calculate data length to be inlined to estimate
> + * the required space in WQE ring buffer.
> + */
> + dlen = rte_pktmbuf_pkt_len(loc->mbuf);
> + if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags &
> PKT_TX_VLAN_PKT)
> + vlan = sizeof(struct rte_vlan_hdr);
> + inlen = loc->mbuf->l2_len + vlan +
> + loc->mbuf->l3_len + loc->mbuf->l4_len;
> + if (unlikely((!inlen || !loc->mbuf->tso_segsz)))
> + return MLX5_TXCMP_CODE_ERROR;
> + if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
> + inlen += loc->mbuf->outer_l2_len + loc->mbuf-
> >outer_l3_len;
> + /* Packet must contain all TSO headers. */
> + if (unlikely(inlen > MLX5_MAX_TSO_HEADER ||
> + inlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
> + inlen > (dlen + vlan)))
> + return MLX5_TXCMP_CODE_ERROR;
> + MLX5_ASSERT(inlen >= txq->inlen_mode);
> + /*
> + * Check whether there are enough free WQEBBs:
> + * - Control Segment
> + * - Ethernet Segment
> + * - First Segment of inlined Ethernet data
> + * - ... data continued ...
> + * - Data Segments of pointer/min inline type
> + */
> + ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
> + MLX5_ESEG_MIN_INLINE_SIZE +
> + MLX5_WSEG_SIZE +
> + MLX5_WSEG_SIZE - 1) /
> MLX5_WSEG_SIZE;
> + if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
> + return MLX5_TXCMP_CODE_EXIT;
> + /* Check for maximal WQE size. */
> + if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) /
> 4)))
> + return MLX5_TXCMP_CODE_ERROR;
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes/packets counters. */
> + ntcp = (dlen - (inlen - vlan) + loc->mbuf->tso_segsz - 1) /
> + loc->mbuf->tso_segsz;
> + /*
> + * One will be added for mbuf itself at the end of the mlx5_tx_burst
> + * from loc->pkts_sent field.
> + */
> + --ntcp;
> + txq->stats.opackets += ntcp;
> + txq->stats.obytes += dlen + vlan + ntcp * inlen;
> +#endif
> + wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> + loc->wqe_last = wqe;
> + mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_TSO, olx);
> + ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 1, olx);
> + wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
> + txq->wqe_ci += (ds + 3) / 4;
> + loc->wqe_free -= (ds + 3) / 4;
> + return MLX5_TXCMP_CODE_MULTI;
> +}
> +
> +/**
> + * Tx one packet function for multi-segment SEND. Supports all types of Tx
> + * offloads, uses MLX5_OPCODE_SEND to build WQEs, sends one packet
> per WQE,
> + * without any data inlining in Ethernet Segment.
> + *
> + * This routine is responsible for storing processed mbuf
> + * into elts ring buffer and update elts_head.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> + * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> + * Local context variables partially updated.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_packet_multi_send(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + struct mlx5_wqe_dseg *__rte_restrict dseg;
> + struct mlx5_wqe *__rte_restrict wqe;
> + unsigned int ds, nseg;
> +
> + MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
> + if (MLX5_TXOFF_CONFIG(TXPP)) {
> + enum mlx5_txcmp_code wret;
> +
> + /* Generate WAIT for scheduling if requested. */
> + wret = mlx5_tx_schedule_send(txq, loc, olx);
> + if (wret == MLX5_TXCMP_CODE_EXIT)
> + return MLX5_TXCMP_CODE_EXIT;
> + if (wret == MLX5_TXCMP_CODE_ERROR)
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + /*
> + * No inline at all, it means the CPU cycles saving is prioritized at
> + * configuration, we should not copy any packet data to WQE.
> + */
> + nseg = NB_SEGS(loc->mbuf);
> + ds = 2 + nseg;
> + if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
> + return MLX5_TXCMP_CODE_EXIT;
> + /* Check for maximal WQE size. */
> + if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) /
> 4)))
> + return MLX5_TXCMP_CODE_ERROR;
> + /*
> + * Some Tx offloads may cause an error if packet is not long enough,
> + * check against assumed minimal length.
> + */
> + if (rte_pktmbuf_pkt_len(loc->mbuf) <=
> MLX5_ESEG_MIN_INLINE_SIZE)
> + return MLX5_TXCMP_CODE_ERROR;
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes counter. */
> + txq->stats.obytes += rte_pktmbuf_pkt_len(loc->mbuf);
> + if (MLX5_TXOFF_CONFIG(VLAN) &&
> + loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
> + txq->stats.obytes += sizeof(struct rte_vlan_hdr);
> +#endif
> + /*
> + * SEND WQE, one WQEBB:
> + * - Control Segment, SEND opcode
> + * - Ethernet Segment, optional VLAN, no inline
> + * - Data Segments, pointer only type
> + */
> + wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> + loc->wqe_last = wqe;
> + mlx5_tx_cseg_init(txq, loc, wqe, ds, MLX5_OPCODE_SEND, olx);
> + mlx5_tx_eseg_none(txq, loc, wqe, olx);
> + dseg = &wqe->dseg[0];
> + do {
> + if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
> + struct rte_mbuf *mbuf;
> +
> + /*
> + * Zero length segment found, have to correct total
> + * size of WQE in segments.
> + * It is supposed to be rare occasion, so in normal
> + * case (no zero length segments) we avoid extra
> + * writing to the Control Segment.
> + */
> + --ds;
> + wqe->cseg.sq_ds -= RTE_BE32(1);
> + mbuf = loc->mbuf;
> + loc->mbuf = mbuf->next;
> + rte_pktmbuf_free_seg(mbuf);
> + if (--nseg == 0)
> + break;
> + } else {
> + mlx5_tx_dseg_ptr
> + (txq, loc, dseg,
> + rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
> + rte_pktmbuf_data_len(loc->mbuf), olx);
> + txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> + --loc->elts_free;
> + if (--nseg == 0)
> + break;
> + ++dseg;
> + if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> + dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> + loc->mbuf = loc->mbuf->next;
> + }
> + } while (true);
> + txq->wqe_ci += (ds + 3) / 4;
> + loc->wqe_free -= (ds + 3) / 4;
> + return MLX5_TXCMP_CODE_MULTI;
> +}
> +
> +/**
> + * Tx one packet function for multi-segment SEND. Supports all
> + * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
> + * sends one packet per WQE, with data inlining in
> + * Ethernet Segment and minimal Data Segments.
> + *
> + * This routine is responsible for storing processed mbuf
> + * into elts ring buffer and update elts_head.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> + * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> + * Local context variables partially updated.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_packet_multi_inline(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + struct mlx5_wqe *__rte_restrict wqe;
> + unsigned int ds, inlen, dlen, vlan = 0;
> +
> + MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> + MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
> + if (MLX5_TXOFF_CONFIG(TXPP)) {
> + enum mlx5_txcmp_code wret;
> +
> + /* Generate WAIT for scheduling if requested. */
> + wret = mlx5_tx_schedule_send(txq, loc, olx);
> + if (wret == MLX5_TXCMP_CODE_EXIT)
> + return MLX5_TXCMP_CODE_EXIT;
> + if (wret == MLX5_TXCMP_CODE_ERROR)
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + /*
> + * First calculate data length to be inlined
> + * to estimate the required space for WQE.
> + */
> + dlen = rte_pktmbuf_pkt_len(loc->mbuf);
> + if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags &
> PKT_TX_VLAN_PKT)
> + vlan = sizeof(struct rte_vlan_hdr);
> + inlen = dlen + vlan;
> + /* Check against minimal length. */
> + if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
> + return MLX5_TXCMP_CODE_ERROR;
> + MLX5_ASSERT(txq->inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
> + if (inlen > txq->inlen_send ||
> + loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
> + struct rte_mbuf *mbuf;
> + unsigned int nxlen;
> + uintptr_t start;
> +
> + /*
> + * Packet length exceeds the allowed inline data length,
> + * check whether the minimal inlining is required.
> + */
> + if (txq->inlen_mode) {
> + MLX5_ASSERT(txq->inlen_mode >=
> + MLX5_ESEG_MIN_INLINE_SIZE);
> + MLX5_ASSERT(txq->inlen_mode <= txq-
> >inlen_send);
> + inlen = txq->inlen_mode;
> + } else {
> + if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE
> ||
> + !vlan || txq->vlan_en) {
> + /*
> + * VLAN insertion will be done inside by HW.
> + * It is not utmost effective - VLAN flag is
> + * checked twice, but we should proceed the
> + * inlining length correctly and take into
> + * account the VLAN header being inserted.
> + */
> + return mlx5_tx_packet_multi_send
> + (txq, loc, olx);
> + }
> + inlen = MLX5_ESEG_MIN_INLINE_SIZE;
> + }
> + /*
> + * Now we know the minimal amount of data is requested
> + * to inline. Check whether we should inline the buffers
> + * from the chain beginning to eliminate some mbufs.
> + */
> + mbuf = loc->mbuf;
> + nxlen = rte_pktmbuf_data_len(mbuf);
> + if (unlikely(nxlen <= txq->inlen_send)) {
> + /* We can inline first mbuf at least. */
> + if (nxlen < inlen) {
> + unsigned int smlen;
> +
> + /* Scan mbufs till inlen filled. */
> + do {
> + smlen = nxlen;
> + mbuf = NEXT(mbuf);
> + MLX5_ASSERT(mbuf);
> + nxlen =
> rte_pktmbuf_data_len(mbuf);
> + nxlen += smlen;
> + } while (unlikely(nxlen < inlen));
> + if (unlikely(nxlen > txq->inlen_send)) {
> + /* We cannot inline entire mbuf. */
> + smlen = inlen - smlen;
> + start = rte_pktmbuf_mtod_offset
> + (mbuf, uintptr_t, smlen);
> + goto do_align;
> + }
> + }
> + do {
> + inlen = nxlen;
> + mbuf = NEXT(mbuf);
> + /* There should be not end of packet. */
> + MLX5_ASSERT(mbuf);
> + nxlen = inlen +
> rte_pktmbuf_data_len(mbuf);
> + } while (unlikely(nxlen < txq->inlen_send));
> + }
> + start = rte_pktmbuf_mtod(mbuf, uintptr_t);
> + /*
> + * Check whether we can do inline to align start
> + * address of data buffer to cacheline.
> + */
> +do_align:
> + start = (~start + 1) & (RTE_CACHE_LINE_SIZE - 1);
> + if (unlikely(start)) {
> + start += inlen;
> + if (start <= txq->inlen_send)
> + inlen = start;
> + }
> + }
> + /*
> + * Check whether there are enough free WQEBBs:
> + * - Control Segment
> + * - Ethernet Segment
> + * - First Segment of inlined Ethernet data
> + * - ... data continued ...
> + * - Data Segments of pointer/min inline type
> + *
> + * Estimate the number of Data Segments conservatively,
> + * supposing no any mbufs is being freed during inlining.
> + */
> + MLX5_ASSERT(inlen <= txq->inlen_send);
> + ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
> + MLX5_ESEG_MIN_INLINE_SIZE +
> + MLX5_WSEG_SIZE +
> + MLX5_WSEG_SIZE - 1) /
> MLX5_WSEG_SIZE;
> + if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
> + return MLX5_TXCMP_CODE_EXIT;
> + /* Check for maximal WQE size. */
> + if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) /
> 4)))
> + return MLX5_TXCMP_CODE_ERROR;
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes/packets counters. */
> + txq->stats.obytes += dlen + vlan;
> +#endif
> + wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> + loc->wqe_last = wqe;
> + mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_SEND, olx);
> + ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 0, olx);
> + wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
> + txq->wqe_ci += (ds + 3) / 4;
> + loc->wqe_free -= (ds + 3) / 4;
> + return MLX5_TXCMP_CODE_MULTI;
> +}
> +
> +/**
> + * Tx burst function for multi-segment packets. Supports all
> + * types of Tx offloads, uses MLX5_OPCODE_SEND/TSO to build WQEs,
> + * sends one packet per WQE. Function stops sending if it
> + * encounters the single-segment packet.
> + *
> + * This routine is responsible for storing processed mbuf
> + * into elts ring buffer and update elts_head.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param[in] pkts
> + * Packets to transmit.
> + * @param pkts_n
> + * Number of packets in array.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> + * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> + * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
> + * MLX5_TXCMP_CODE_TSO - TSO single-segment packet encountered.
> + * Local context variables updated.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_burst_mseg(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + unsigned int pkts_n,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> + MLX5_ASSERT(pkts_n > loc->pkts_sent);
> + pkts += loc->pkts_sent + 1;
> + pkts_n -= loc->pkts_sent;
> + for (;;) {
> + enum mlx5_txcmp_code ret;
> +
> + MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
> + /*
> + * Estimate the number of free elts quickly but
> conservatively.
> + * Some segment may be fully inlined and freed,
> + * ignore this here - precise estimation is costly.
> + */
> + if (loc->elts_free < NB_SEGS(loc->mbuf))
> + return MLX5_TXCMP_CODE_EXIT;
> + if (MLX5_TXOFF_CONFIG(TSO) &&
> + unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)) {
> + /* Proceed with multi-segment TSO. */
> + ret = mlx5_tx_packet_multi_tso(txq, loc, olx);
> + } else if (MLX5_TXOFF_CONFIG(INLINE)) {
> + /* Proceed with multi-segment SEND with inlining. */
> + ret = mlx5_tx_packet_multi_inline(txq, loc, olx);
> + } else {
> + /* Proceed with multi-segment SEND w/o inlining. */
> + ret = mlx5_tx_packet_multi_send(txq, loc, olx);
> + }
> + if (ret == MLX5_TXCMP_CODE_EXIT)
> + return MLX5_TXCMP_CODE_EXIT;
> + if (ret == MLX5_TXCMP_CODE_ERROR)
> + return MLX5_TXCMP_CODE_ERROR;
> + /* WQE is built, go to the next packet. */
> + ++loc->pkts_sent;
> + --pkts_n;
> + if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + loc->mbuf = *pkts++;
> + if (pkts_n > 1)
> + rte_prefetch0(*pkts);
> + if (likely(NB_SEGS(loc->mbuf) > 1))
> + continue;
> + /* Here ends the series of multi-segment packets. */
> + if (MLX5_TXOFF_CONFIG(TSO) &&
> + unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
> + return MLX5_TXCMP_CODE_TSO;
> + return MLX5_TXCMP_CODE_SINGLE;
> + }
> + MLX5_ASSERT(false);
> +}
> +
> +/**
> + * Tx burst function for single-segment packets with TSO.
> + * Supports all types of Tx offloads, except multi-packets.
> + * Uses MLX5_OPCODE_TSO to build WQEs, sends one packet per WQE.
> + * Function stops sending if it encounters the multi-segment
> + * packet or packet without TSO requested.
> + *
> + * The routine is responsible for storing processed mbuf into elts ring buffer
> + * and update elts_head if inline offloads is requested due to possible early
> + * freeing of the inlined mbufs (can not store pkts array in elts as a batch).
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param[in] pkts
> + * Packets to transmit.
> + * @param pkts_n
> + * Number of packets in array.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> + * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> + * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
> + * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
> + * Local context variables updated.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_burst_tso(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + unsigned int pkts_n,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> + MLX5_ASSERT(pkts_n > loc->pkts_sent);
> + pkts += loc->pkts_sent + 1;
> + pkts_n -= loc->pkts_sent;
> + for (;;) {
> + struct mlx5_wqe_dseg *__rte_restrict dseg;
> + struct mlx5_wqe *__rte_restrict wqe;
> + unsigned int ds, dlen, hlen, ntcp, vlan = 0;
> + uint8_t *dptr;
> +
> + MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> + if (MLX5_TXOFF_CONFIG(TXPP)) {
> + enum mlx5_txcmp_code wret;
> +
> + /* Generate WAIT for scheduling if requested. */
> + wret = mlx5_tx_schedule_send(txq, loc, olx);
> + if (wret == MLX5_TXCMP_CODE_EXIT)
> + return MLX5_TXCMP_CODE_EXIT;
> + if (wret == MLX5_TXCMP_CODE_ERROR)
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + dlen = rte_pktmbuf_data_len(loc->mbuf);
> + if (MLX5_TXOFF_CONFIG(VLAN) &&
> + loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
> + vlan = sizeof(struct rte_vlan_hdr);
> + }
> + /*
> + * First calculate the WQE size to check
> + * whether we have enough space in ring buffer.
> + */
> + hlen = loc->mbuf->l2_len + vlan +
> + loc->mbuf->l3_len + loc->mbuf->l4_len;
> + if (unlikely((!hlen || !loc->mbuf->tso_segsz)))
> + return MLX5_TXCMP_CODE_ERROR;
> + if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
> + hlen += loc->mbuf->outer_l2_len +
> + loc->mbuf->outer_l3_len;
> + /* Segment must contain all TSO headers. */
> + if (unlikely(hlen > MLX5_MAX_TSO_HEADER ||
> + hlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
> + hlen > (dlen + vlan)))
> + return MLX5_TXCMP_CODE_ERROR;
> + /*
> + * Check whether there are enough free WQEBBs:
> + * - Control Segment
> + * - Ethernet Segment
> + * - First Segment of inlined Ethernet data
> + * - ... data continued ...
> + * - Finishing Data Segment of pointer type
> + */
> + ds = 4 + (hlen - MLX5_ESEG_MIN_INLINE_SIZE +
> + MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
> + if (loc->wqe_free < ((ds + 3) / 4))
> + return MLX5_TXCMP_CODE_EXIT;
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes/packets counters. */
> + ntcp = (dlen + vlan - hlen +
> + loc->mbuf->tso_segsz - 1) /
> + loc->mbuf->tso_segsz;
> + /*
> + * One will be added for mbuf itself at the end
> + * of the mlx5_tx_burst from loc->pkts_sent field.
> + */
> + --ntcp;
> + txq->stats.opackets += ntcp;
> + txq->stats.obytes += dlen + vlan + ntcp * hlen;
> +#endif
> + /*
> + * Build the TSO WQE:
> + * - Control Segment
> + * - Ethernet Segment with hlen bytes inlined
> + * - Data Segment of pointer type
> + */
> + wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> + loc->wqe_last = wqe;
> + mlx5_tx_cseg_init(txq, loc, wqe, ds,
> + MLX5_OPCODE_TSO, olx);
> + dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan, hlen, 1, olx);
> + dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) + hlen -
> vlan;
> + dlen -= hlen - vlan;
> + mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
> + /*
> + * WQE is built, update the loop parameters
> + * and go to the next packet.
> + */
> + txq->wqe_ci += (ds + 3) / 4;
> + loc->wqe_free -= (ds + 3) / 4;
> + if (MLX5_TXOFF_CONFIG(INLINE))
> + txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> + --loc->elts_free;
> + ++loc->pkts_sent;
> + --pkts_n;
> + if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + loc->mbuf = *pkts++;
> + if (pkts_n > 1)
> + rte_prefetch0(*pkts);
> + if (MLX5_TXOFF_CONFIG(MULTI) &&
> + unlikely(NB_SEGS(loc->mbuf) > 1))
> + return MLX5_TXCMP_CODE_MULTI;
> + if (likely(!(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)))
> + return MLX5_TXCMP_CODE_SINGLE;
> + /* Continue with the next TSO packet. */
> + }
> + MLX5_ASSERT(false);
> +}
> +
> +/**
> + * Analyze the packet and select the best method to send.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + * @param newp
> + * The predefined flag whether do complete check for
> + * multi-segment packets and TSO.
> + *
> + * @return
> + * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
> + * MLX5_TXCMP_CODE_TSO - TSO required, use TSO/LSO.
> + * MLX5_TXCMP_CODE_SINGLE - single-segment packet, use SEND.
> + * MLX5_TXCMP_CODE_EMPW - single-segment packet, use MPW.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_able_to_empw(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx,
> + bool newp)
> +{
> + /* Check for multi-segment packet. */
> + if (newp &&
> + MLX5_TXOFF_CONFIG(MULTI) &&
> + unlikely(NB_SEGS(loc->mbuf) > 1))
> + return MLX5_TXCMP_CODE_MULTI;
> + /* Check for TSO packet. */
> + if (newp &&
> + MLX5_TXOFF_CONFIG(TSO) &&
> + unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
> + return MLX5_TXCMP_CODE_TSO;
> + /* Check if eMPW is enabled at all. */
> + if (!MLX5_TXOFF_CONFIG(EMPW))
> + return MLX5_TXCMP_CODE_SINGLE;
> + /* Check if eMPW can be engaged. */
> + if (MLX5_TXOFF_CONFIG(VLAN) &&
> + unlikely(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) &&
> + (!MLX5_TXOFF_CONFIG(INLINE) ||
> + unlikely((rte_pktmbuf_data_len(loc->mbuf) +
> + sizeof(struct rte_vlan_hdr)) > txq->inlen_empw))) {
> + /*
> + * eMPW does not support VLAN insertion offload, we have
> to
> + * inline the entire packet but packet is too long for inlining.
> + */
> + return MLX5_TXCMP_CODE_SINGLE;
> + }
> + return MLX5_TXCMP_CODE_EMPW;
> +}
> +
> +/**
> + * Check the next packet attributes to match with the eMPW batch ones.
> + * In addition, for legacy MPW the packet length is checked either.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param es
> + * Pointer to Ethernet Segment of eMPW batch.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param dlen
> + * Length of previous packet in MPW descriptor.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * true - packet match with eMPW batch attributes.
> + * false - no match, eMPW should be restarted.
> + */
> +static __rte_always_inline bool
> +mlx5_tx_match_empw(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_wqe_eseg *__rte_restrict es,
> + struct mlx5_txq_local *__rte_restrict loc,
> + uint32_t dlen,
> + unsigned int olx)
> +{
> + uint8_t swp_flags = 0;
> +
> + /* Compare the checksum flags, if any. */
> + if (MLX5_TXOFF_CONFIG(CSUM) &&
> + txq_ol_cksum_to_cs(loc->mbuf) != es->cs_flags)
> + return false;
> + /* Compare the Software Parser offsets and flags. */
> + if (MLX5_TXOFF_CONFIG(SWP) &&
> + (es->swp_offs != txq_mbuf_to_swp(loc, &swp_flags, olx) ||
> + es->swp_flags != swp_flags))
> + return false;
> + /* Fill metadata field if needed. */
> + if (MLX5_TXOFF_CONFIG(METADATA) &&
> + es->metadata != (loc->mbuf->ol_flags &
> PKT_TX_DYNF_METADATA ?
> + *RTE_FLOW_DYNF_METADATA(loc->mbuf) :
> 0))
> + return false;
> + /* Legacy MPW can send packets with the same length only. */
> + if (MLX5_TXOFF_CONFIG(MPW) &&
> + dlen != rte_pktmbuf_data_len(loc->mbuf))
> + return false;
> + /* There must be no VLAN packets in eMPW loop. */
> + if (MLX5_TXOFF_CONFIG(VLAN))
> + MLX5_ASSERT(!(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT));
> + /* Check if the scheduling is requested. */
> + if (MLX5_TXOFF_CONFIG(TXPP) &&
> + loc->mbuf->ol_flags & txq->ts_mask)
> + return false;
> + return true;
> +}
> +
> +/**
> + * Update send loop variables and WQE for eMPW loop without data
> inlining.
> + * Number of Data Segments is equal to the number of sent packets.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param ds
> + * Number of packets/Data Segments/Packets.
> + * @param slen
> + * Accumulated statistics, bytes sent.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * true - packet match with eMPW batch attributes.
> + * false - no match, eMPW should be restarted.
> + */
> +static __rte_always_inline void
> +mlx5_tx_sdone_empw(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int ds,
> + unsigned int slen,
> + unsigned int olx __rte_unused)
> +{
> + MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes counter. */
> + txq->stats.obytes += slen;
> +#else
> + (void)slen;
> +#endif
> + loc->elts_free -= ds;
> + loc->pkts_sent += ds;
> + ds += 2;
> + loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s |
> ds);
> + txq->wqe_ci += (ds + 3) / 4;
> + loc->wqe_free -= (ds + 3) / 4;
> +}
> +
> +/**
> + * Update send loop variables and WQE for eMPW loop with data inlining.
> + * Gets the size of pushed descriptors and data to the WQE.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param len
> + * Total size of descriptor/data in bytes.
> + * @param slen
> + * Accumulated statistics, data bytes sent.
> + * @param wqem
> + * The base WQE for the eMPW/MPW descriptor.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * true - packet match with eMPW batch attributes.
> + * false - no match, eMPW should be restarted.
> + */
> +static __rte_always_inline void
> +mlx5_tx_idone_empw(struct mlx5_txq_data *__rte_restrict txq,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int len,
> + unsigned int slen,
> + struct mlx5_wqe *__rte_restrict wqem,
> + unsigned int olx __rte_unused)
> +{
> + struct mlx5_wqe_dseg *dseg = &wqem->dseg[0];
> +
> + MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes counter. */
> + txq->stats.obytes += slen;
> +#else
> + (void)slen;
> +#endif
> + if (MLX5_TXOFF_CONFIG(MPW) && dseg->bcount == RTE_BE32(0)) {
> + /*
> + * If the legacy MPW session contains the inline packets
> + * we should set the only inline data segment length
> + * and align the total length to the segment size.
> + */
> + MLX5_ASSERT(len > sizeof(dseg->bcount));
> + dseg->bcount = rte_cpu_to_be_32((len - sizeof(dseg-
> >bcount)) |
> +
> MLX5_ETH_WQE_DATA_INLINE);
> + len = (len + MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE + 2;
> + } else {
> + /*
> + * The session is not legacy MPW or contains the
> + * data buffer pointer segments.
> + */
> + MLX5_ASSERT((len % MLX5_WSEG_SIZE) == 0);
> + len = len / MLX5_WSEG_SIZE + 2;
> + }
> + wqem->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
> + txq->wqe_ci += (len + 3) / 4;
> + loc->wqe_free -= (len + 3) / 4;
> + loc->wqe_last = wqem;
> +}
> +
> +/**
> + * The set of Tx burst functions for single-segment packets without TSO
> + * and with Multi-Packet Writing feature support.
> + * Supports all types of Tx offloads, except multi-packets and TSO.
> + *
> + * Uses MLX5_OPCODE_EMPW to build WQEs if possible and sends as many
> packet
> + * per WQE as it can. If eMPW is not configured or packet can not be sent
> with
> + * eMPW (VLAN insertion) the ordinary SEND opcode is used and only one
> packet
> + * placed in WQE.
> + *
> + * Functions stop sending if it encounters the multi-segment packet or
> packet
> + * with TSO requested.
> + *
> + * The routines are responsible for storing processed mbuf into elts ring
> buffer
> + * and update elts_head if inlining offload is requested. Otherwise the
> copying
> + * mbufs to elts can be postponed and completed at the end of burst
> routine.
> + *
> + * @param txq
> + * Pointer to TX queue structure.
> + * @param[in] pkts
> + * Packets to transmit.
> + * @param pkts_n
> + * Number of packets in array.
> + * @param loc
> + * Pointer to burst routine local context.
> + * @param olx
> + * Configured Tx offloads mask. It is fully defined at
> + * compile time and may be used for optimization.
> + *
> + * @return
> + * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
> + * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
> + * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
> + * MLX5_TXCMP_CODE_TSO - TSO packet encountered.
> + * MLX5_TXCMP_CODE_SINGLE - used inside functions set.
> + * MLX5_TXCMP_CODE_EMPW - used inside functions set.
> + *
> + * Local context variables updated.
> + *
> + *
> + * The routine sends packets with MLX5_OPCODE_EMPW
> + * without inlining, this is dedicated optimized branch.
> + * No VLAN insertion is supported.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_burst_empw_simple(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + unsigned int pkts_n,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + /*
> + * Subroutine is the part of mlx5_tx_burst_single() and sends
> + * single-segment packet with eMPW opcode without data inlining.
> + */
> + MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
> + MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
> + MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> + MLX5_ASSERT(pkts_n > loc->pkts_sent);
> + pkts += loc->pkts_sent + 1;
> + pkts_n -= loc->pkts_sent;
> + for (;;) {
> + struct mlx5_wqe_dseg *__rte_restrict dseg;
> + struct mlx5_wqe_eseg *__rte_restrict eseg;
> + enum mlx5_txcmp_code ret;
> + unsigned int part, loop;
> + unsigned int slen = 0;
> +
> +next_empw:
> + MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> + if (MLX5_TXOFF_CONFIG(TXPP)) {
> + enum mlx5_txcmp_code wret;
> +
> + /* Generate WAIT for scheduling if requested. */
> + wret = mlx5_tx_schedule_send(txq, loc, olx);
> + if (wret == MLX5_TXCMP_CODE_EXIT)
> + return MLX5_TXCMP_CODE_EXIT;
> + if (wret == MLX5_TXCMP_CODE_ERROR)
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
> + MLX5_MPW_MAX_PACKETS :
> + MLX5_EMPW_MAX_PACKETS);
> + if (unlikely(loc->elts_free < part)) {
> + /* We have no enough elts to save all mbufs. */
> + if (unlikely(loc->elts_free <
> MLX5_EMPW_MIN_PACKETS))
> + return MLX5_TXCMP_CODE_EXIT;
> + /* But we still able to send at least minimal eMPW. */
> + part = loc->elts_free;
> + }
> + /* Check whether we have enough WQEs */
> + if (unlikely(loc->wqe_free < ((2 + part + 3) / 4))) {
> + if (unlikely(loc->wqe_free <
> + ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
> + return MLX5_TXCMP_CODE_EXIT;
> + part = (loc->wqe_free * 4) - 2;
> + }
> + if (likely(part > 1))
> + rte_prefetch0(*pkts);
> + loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> + /*
> + * Build eMPW title WQEBB:
> + * - Control Segment, eMPW opcode
> + * - Ethernet Segment, no inline
> + */
> + mlx5_tx_cseg_init(txq, loc, loc->wqe_last, part + 2,
> + MLX5_OPCODE_ENHANCED_MPSW, olx);
> + mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
> + olx & ~MLX5_TXOFF_CONFIG_VLAN);
> + eseg = &loc->wqe_last->eseg;
> + dseg = &loc->wqe_last->dseg[0];
> + loop = part;
> + /* Store the packet length for legacy MPW. */
> + if (MLX5_TXOFF_CONFIG(MPW))
> + eseg->mss = rte_cpu_to_be_16
> + (rte_pktmbuf_data_len(loc->mbuf));
> + for (;;) {
> + uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes counter. */
> + slen += dlen;
> +#endif
> + mlx5_tx_dseg_ptr
> + (txq, loc, dseg,
> + rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
> + dlen, olx);
> + if (unlikely(--loop == 0))
> + break;
> + loc->mbuf = *pkts++;
> + if (likely(loop > 1))
> + rte_prefetch0(*pkts);
> + ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
> + /*
> + * Unroll the completion code to avoid
> + * returning variable value - it results in
> + * unoptimized sequent checking in caller.
> + */
> + if (ret == MLX5_TXCMP_CODE_MULTI) {
> + part -= loop;
> + mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> + if (unlikely(!loc->elts_free ||
> + !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + return MLX5_TXCMP_CODE_MULTI;
> + }
> + MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> + if (ret == MLX5_TXCMP_CODE_TSO) {
> + part -= loop;
> + mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> + if (unlikely(!loc->elts_free ||
> + !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + return MLX5_TXCMP_CODE_TSO;
> + }
> + if (ret == MLX5_TXCMP_CODE_SINGLE) {
> + part -= loop;
> + mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> + if (unlikely(!loc->elts_free ||
> + !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + return MLX5_TXCMP_CODE_SINGLE;
> + }
> + if (ret != MLX5_TXCMP_CODE_EMPW) {
> + MLX5_ASSERT(false);
> + part -= loop;
> + mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + /*
> + * Check whether packet parameters coincide
> + * within assumed eMPW batch:
> + * - check sum settings
> + * - metadata value
> + * - software parser settings
> + * - packets length (legacy MPW only)
> + * - scheduling is not required
> + */
> + if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
> + MLX5_ASSERT(loop);
> + part -= loop;
> + mlx5_tx_sdone_empw(txq, loc, part, slen,
> olx);
> + if (unlikely(!loc->elts_free ||
> + !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + pkts_n -= part;
> + goto next_empw;
> + }
> + /* Packet attributes match, continue the same
> eMPW. */
> + ++dseg;
> + if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> + dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> + }
> + /* eMPW is built successfully, update loop parameters. */
> + MLX5_ASSERT(!loop);
> + MLX5_ASSERT(pkts_n >= part);
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes counter. */
> + txq->stats.obytes += slen;
> +#endif
> + loc->elts_free -= part;
> + loc->pkts_sent += part;
> + txq->wqe_ci += (2 + part + 3) / 4;
> + loc->wqe_free -= (2 + part + 3) / 4;
> + pkts_n -= part;
> + if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + loc->mbuf = *pkts++;
> + ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
> + if (unlikely(ret != MLX5_TXCMP_CODE_EMPW))
> + return ret;
> + /* Continue sending eMPW batches. */
> + }
> + MLX5_ASSERT(false);
> +}
> +
> +/**
> + * The routine sends packets with MLX5_OPCODE_EMPW
> + * with inlining, optionally supports VLAN insertion.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_burst_empw_inline(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + unsigned int pkts_n,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + /*
> + * Subroutine is the part of mlx5_tx_burst_single() and sends
> + * single-segment packet with eMPW opcode with data inlining.
> + */
> + MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> + MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
> + MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> + MLX5_ASSERT(pkts_n > loc->pkts_sent);
> + pkts += loc->pkts_sent + 1;
> + pkts_n -= loc->pkts_sent;
> + for (;;) {
> + struct mlx5_wqe_dseg *__rte_restrict dseg;
> + struct mlx5_wqe *__rte_restrict wqem;
> + enum mlx5_txcmp_code ret;
> + unsigned int room, part, nlim;
> + unsigned int slen = 0;
> +
> + MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> + if (MLX5_TXOFF_CONFIG(TXPP)) {
> + enum mlx5_txcmp_code wret;
> +
> + /* Generate WAIT for scheduling if requested. */
> + wret = mlx5_tx_schedule_send(txq, loc, olx);
> + if (wret == MLX5_TXCMP_CODE_EXIT)
> + return MLX5_TXCMP_CODE_EXIT;
> + if (wret == MLX5_TXCMP_CODE_ERROR)
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + /*
> + * Limits the amount of packets in one WQE
> + * to improve CQE latency generation.
> + */
> + nlim = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
> + MLX5_MPW_INLINE_MAX_PACKETS :
> + MLX5_EMPW_MAX_PACKETS);
> + /* Check whether we have minimal amount WQEs */
> + if (unlikely(loc->wqe_free <
> + ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
> + return MLX5_TXCMP_CODE_EXIT;
> + if (likely(pkts_n > 1))
> + rte_prefetch0(*pkts);
> + wqem = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> + /*
> + * Build eMPW title WQEBB:
> + * - Control Segment, eMPW opcode, zero DS
> + * - Ethernet Segment, no inline
> + */
> + mlx5_tx_cseg_init(txq, loc, wqem, 0,
> + MLX5_OPCODE_ENHANCED_MPSW, olx);
> + mlx5_tx_eseg_none(txq, loc, wqem,
> + olx & ~MLX5_TXOFF_CONFIG_VLAN);
> + dseg = &wqem->dseg[0];
> + /* Store the packet length for legacy MPW. */
> + if (MLX5_TXOFF_CONFIG(MPW))
> + wqem->eseg.mss = rte_cpu_to_be_16
> + (rte_pktmbuf_data_len(loc-
> >mbuf));
> + room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
> + loc->wqe_free) * MLX5_WQE_SIZE -
> + MLX5_WQE_CSEG_SIZE -
> + MLX5_WQE_ESEG_SIZE;
> + /* Limit the room for legacy MPW sessions for performance.
> */
> + if (MLX5_TXOFF_CONFIG(MPW))
> + room = RTE_MIN(room,
> + RTE_MAX(txq->inlen_empw +
> + sizeof(dseg->bcount) +
> + (MLX5_TXOFF_CONFIG(VLAN) ?
> + sizeof(struct rte_vlan_hdr) : 0),
> +
> MLX5_MPW_INLINE_MAX_PACKETS *
> + MLX5_WQE_DSEG_SIZE));
> + /* Build WQE till we have space, packets and resources. */
> + part = room;
> + for (;;) {
> + uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
> + uint8_t *dptr = rte_pktmbuf_mtod(loc->mbuf,
> uint8_t *);
> + unsigned int tlen;
> +
> + MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
> + MLX5_ASSERT((room % MLX5_WQE_DSEG_SIZE) ==
> 0);
> + MLX5_ASSERT((uintptr_t)dseg < (uintptr_t)txq-
> >wqes_end);
> + /*
> + * Some Tx offloads may cause an error if packet is
> not
> + * long enough, check against assumed minimal
> length.
> + */
> + if (unlikely(dlen <= MLX5_ESEG_MIN_INLINE_SIZE)) {
> + part -= room;
> + if (unlikely(!part))
> + return MLX5_TXCMP_CODE_ERROR;
> + /*
> + * We have some successfully built
> + * packet Data Segments to send.
> + */
> + mlx5_tx_idone_empw(txq, loc, part,
> + slen, wqem, olx);
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + /* Inline or not inline - that's the Question. */
> + if (dlen > txq->inlen_empw ||
> + loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE)
> + goto pointer_empw;
> + if (MLX5_TXOFF_CONFIG(MPW)) {
> + if (dlen > txq->inlen_send)
> + goto pointer_empw;
> + tlen = dlen;
> + if (part == room) {
> + /* Open new inline MPW session. */
> + tlen += sizeof(dseg->bcount);
> + dseg->bcount = RTE_BE32(0);
> + dseg = RTE_PTR_ADD
> + (dseg, sizeof(dseg->bcount));
> + } else {
> + /*
> + * No pointer and inline descriptor
> + * intermix for legacy MPW sessions.
> + */
> + if (wqem->dseg[0].bcount)
> + break;
> + }
> + } else {
> + tlen = sizeof(dseg->bcount) + dlen;
> + }
> + /* Inline entire packet, optional VLAN insertion. */
> + if (MLX5_TXOFF_CONFIG(VLAN) &&
> + loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
> + /*
> + * The packet length must be checked in
> + * mlx5_tx_able_to_empw() and packet
> + * fits into inline length guaranteed.
> + */
> + MLX5_ASSERT((dlen +
> + sizeof(struct rte_vlan_hdr)) <=
> + txq->inlen_empw);
> + tlen += sizeof(struct rte_vlan_hdr);
> + if (room < tlen)
> + break;
> + dseg = mlx5_tx_dseg_vlan(txq, loc, dseg,
> + dptr, dlen, olx);
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes counter. */
> + slen += sizeof(struct rte_vlan_hdr);
> +#endif
> + } else {
> + if (room < tlen)
> + break;
> + dseg = mlx5_tx_dseg_empw(txq, loc, dseg,
> + dptr, dlen, olx);
> + }
> + if (!MLX5_TXOFF_CONFIG(MPW))
> + tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
> + MLX5_ASSERT(room >= tlen);
> + room -= tlen;
> + /*
> + * Packet data are completely inline,
> + * we can try to free the packet.
> + */
> + if (likely(loc->pkts_sent == loc->mbuf_free)) {
> + /*
> + * All the packets from the burst beginning
> + * are inline, we can free mbufs directly
> + * from the origin array on tx_burst exit().
> + */
> + loc->mbuf_free++;
> + goto next_mbuf;
> + }
> + /*
> + * In order no to call rte_pktmbuf_free_seg() here,
> + * in the most inner loop (that might be very
> + * expensive) we just save the mbuf in elts.
> + */
> + txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> + loc->elts_free--;
> + goto next_mbuf;
> +pointer_empw:
> + /*
> + * No pointer and inline descriptor
> + * intermix for legacy MPW sessions.
> + */
> + if (MLX5_TXOFF_CONFIG(MPW) &&
> + part != room &&
> + wqem->dseg[0].bcount == RTE_BE32(0))
> + break;
> + /*
> + * Not inlinable VLAN packets are
> + * proceeded outside of this routine.
> + */
> + MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
> + if (MLX5_TXOFF_CONFIG(VLAN))
> + MLX5_ASSERT(!(loc->mbuf->ol_flags &
> + PKT_TX_VLAN_PKT));
> + mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
> + /* We have to store mbuf in elts.*/
> + txq->elts[txq->elts_head++ & txq->elts_m] = loc-
> >mbuf;
> + loc->elts_free--;
> + room -= MLX5_WQE_DSEG_SIZE;
> + /* Ring buffer wraparound is checked at the loop
> end.*/
> + ++dseg;
> +next_mbuf:
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes counter. */
> + slen += dlen;
> +#endif
> + loc->pkts_sent++;
> + pkts_n--;
> + if (unlikely(!pkts_n || !loc->elts_free)) {
> + /*
> + * We have no resources/packets to
> + * continue build descriptors.
> + */
> + part -= room;
> + mlx5_tx_idone_empw(txq, loc, part,
> + slen, wqem, olx);
> + return MLX5_TXCMP_CODE_EXIT;
> + }
> + loc->mbuf = *pkts++;
> + if (likely(pkts_n > 1))
> + rte_prefetch0(*pkts);
> + ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
> + /*
> + * Unroll the completion code to avoid
> + * returning variable value - it results in
> + * unoptimized sequent checking in caller.
> + */
> + if (ret == MLX5_TXCMP_CODE_MULTI) {
> + part -= room;
> + mlx5_tx_idone_empw(txq, loc, part,
> + slen, wqem, olx);
> + if (unlikely(!loc->elts_free ||
> + !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + return MLX5_TXCMP_CODE_MULTI;
> + }
> + MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> + if (ret == MLX5_TXCMP_CODE_TSO) {
> + part -= room;
> + mlx5_tx_idone_empw(txq, loc, part,
> + slen, wqem, olx);
> + if (unlikely(!loc->elts_free ||
> + !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + return MLX5_TXCMP_CODE_TSO;
> + }
> + if (ret == MLX5_TXCMP_CODE_SINGLE) {
> + part -= room;
> + mlx5_tx_idone_empw(txq, loc, part,
> + slen, wqem, olx);
> + if (unlikely(!loc->elts_free ||
> + !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + return MLX5_TXCMP_CODE_SINGLE;
> + }
> + if (ret != MLX5_TXCMP_CODE_EMPW) {
> + MLX5_ASSERT(false);
> + part -= room;
> + mlx5_tx_idone_empw(txq, loc, part,
> + slen, wqem, olx);
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + /* Check if we have minimal room left. */
> + nlim--;
> + if (unlikely(!nlim || room < MLX5_WQE_DSEG_SIZE))
> + break;
> + /*
> + * Check whether packet parameters coincide
> + * within assumed eMPW batch:
> + * - check sum settings
> + * - metadata value
> + * - software parser settings
> + * - packets length (legacy MPW only)
> + * - scheduling is not required
> + */
> + if (!mlx5_tx_match_empw(txq, &wqem->eseg,
> + loc, dlen, olx))
> + break;
> + /* Packet attributes match, continue the same
> eMPW. */
> + if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
> + dseg = (struct mlx5_wqe_dseg *)txq->wqes;
> + }
> + /*
> + * We get here to close an existing eMPW
> + * session and start the new one.
> + */
> + MLX5_ASSERT(pkts_n);
> + part -= room;
> + if (unlikely(!part))
> + return MLX5_TXCMP_CODE_EXIT;
> + mlx5_tx_idone_empw(txq, loc, part, slen, wqem, olx);
> + if (unlikely(!loc->elts_free ||
> + !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + /* Continue the loop with new eMPW session. */
> + }
> + MLX5_ASSERT(false);
> +}
> +
> +/**
> + * The routine sends packets with ordinary MLX5_OPCODE_SEND.
> + * Data inlining and VLAN insertion are supported.
> + */
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_burst_single_send(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + unsigned int pkts_n,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + /*
> + * Subroutine is the part of mlx5_tx_burst_single()
> + * and sends single-segment packet with SEND opcode.
> + */
> + MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> + MLX5_ASSERT(pkts_n > loc->pkts_sent);
> + pkts += loc->pkts_sent + 1;
> + pkts_n -= loc->pkts_sent;
> + for (;;) {
> + struct mlx5_wqe *__rte_restrict wqe;
> + enum mlx5_txcmp_code ret;
> +
> + MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
> + if (MLX5_TXOFF_CONFIG(TXPP)) {
> + enum mlx5_txcmp_code wret;
> +
> + /* Generate WAIT for scheduling if requested. */
> + wret = mlx5_tx_schedule_send(txq, loc, olx);
> + if (wret == MLX5_TXCMP_CODE_EXIT)
> + return MLX5_TXCMP_CODE_EXIT;
> + if (wret == MLX5_TXCMP_CODE_ERROR)
> + return MLX5_TXCMP_CODE_ERROR;
> + }
> + if (MLX5_TXOFF_CONFIG(INLINE)) {
> + unsigned int inlen, vlan = 0;
> +
> + inlen = rte_pktmbuf_data_len(loc->mbuf);
> + if (MLX5_TXOFF_CONFIG(VLAN) &&
> + loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
> + vlan = sizeof(struct rte_vlan_hdr);
> + inlen += vlan;
> + }
> + /*
> + * If inlining is enabled at configuration time
> + * the limit must be not less than minimal size.
> + * Otherwise we would do extra check for data
> + * size to avoid crashes due to length overflow.
> + */
> + MLX5_ASSERT(txq->inlen_send >=
> + MLX5_ESEG_MIN_INLINE_SIZE);
> + if (inlen <= txq->inlen_send) {
> + unsigned int seg_n, wqe_n;
> +
> + rte_prefetch0(rte_pktmbuf_mtod
> + (loc->mbuf, uint8_t *));
> + /* Check against minimal length. */
> + if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
> + return MLX5_TXCMP_CODE_ERROR;
> + if (loc->mbuf->ol_flags &
> + PKT_TX_DYNF_NOINLINE) {
> + /*
> + * The hint flag not to inline packet
> + * data is set. Check whether we can
> + * follow the hint.
> + */
> + if ((!MLX5_TXOFF_CONFIG(EMPW)
> &&
> + txq->inlen_mode) ||
> + (MLX5_TXOFF_CONFIG(MPW) &&
> + txq->inlen_mode)) {
> + if (inlen <= txq->inlen_send)
> + goto single_inline;
> + /*
> + * The hardware requires the
> + * minimal inline data header.
> + */
> + goto single_min_inline;
> + }
> + if (MLX5_TXOFF_CONFIG(VLAN) &&
> + vlan && !txq->vlan_en) {
> + /*
> + * We must insert VLAN tag
> + * by software means.
> + */
> + goto single_part_inline;
> + }
> + goto single_no_inline;
> + }
> +single_inline:
> + /*
> + * Completely inlined packet data WQE:
> + * - Control Segment, SEND opcode
> + * - Ethernet Segment, no VLAN insertion
> + * - Data inlined, VLAN optionally inserted
> + * - Alignment to MLX5_WSEG_SIZE
> + * Have to estimate amount of WQEBBs
> + */
> + seg_n = (inlen + 3 * MLX5_WSEG_SIZE -
> + MLX5_ESEG_MIN_INLINE_SIZE +
> + MLX5_WSEG_SIZE - 1) /
> MLX5_WSEG_SIZE;
> + /* Check if there are enough WQEBBs. */
> + wqe_n = (seg_n + 3) / 4;
> + if (wqe_n > loc->wqe_free)
> + return MLX5_TXCMP_CODE_EXIT;
> + wqe = txq->wqes + (txq->wqe_ci & txq-
> >wqe_m);
> + loc->wqe_last = wqe;
> + mlx5_tx_cseg_init(txq, loc, wqe, seg_n,
> + MLX5_OPCODE_SEND, olx);
> + mlx5_tx_eseg_data(txq, loc, wqe,
> + vlan, inlen, 0, olx);
> + txq->wqe_ci += wqe_n;
> + loc->wqe_free -= wqe_n;
> + /*
> + * Packet data are completely inlined,
> + * free the packet immediately.
> + */
> + rte_pktmbuf_free_seg(loc->mbuf);
> + } else if ((!MLX5_TXOFF_CONFIG(EMPW) ||
> + MLX5_TXOFF_CONFIG(MPW)) &&
> + txq->inlen_mode) {
> + /*
> + * If minimal inlining is requested the eMPW
> + * feature should be disabled due to data is
> + * inlined into Ethernet Segment, which can
> + * not contain inlined data for eMPW due to
> + * segment shared for all packets.
> + */
> + struct mlx5_wqe_dseg *__rte_restrict dseg;
> + unsigned int ds;
> + uint8_t *dptr;
> +
> + /*
> + * The inline-mode settings require
> + * to inline the specified amount of
> + * data bytes to the Ethernet Segment.
> + * We should check the free space in
> + * WQE ring buffer to inline partially.
> + */
> +single_min_inline:
> + MLX5_ASSERT(txq->inlen_send >= txq-
> >inlen_mode);
> + MLX5_ASSERT(inlen > txq->inlen_mode);
> + MLX5_ASSERT(txq->inlen_mode >=
> + MLX5_ESEG_MIN_INLINE_SIZE);
> + /*
> + * Check whether there are enough free
> WQEBBs:
> + * - Control Segment
> + * - Ethernet Segment
> + * - First Segment of inlined Ethernet data
> + * - ... data continued ...
> + * - Finishing Data Segment of pointer type
> + */
> + ds = (MLX5_WQE_CSEG_SIZE +
> + MLX5_WQE_ESEG_SIZE +
> + MLX5_WQE_DSEG_SIZE +
> + txq->inlen_mode -
> + MLX5_ESEG_MIN_INLINE_SIZE +
> + MLX5_WQE_DSEG_SIZE +
> + MLX5_WSEG_SIZE - 1) /
> MLX5_WSEG_SIZE;
> + if (loc->wqe_free < ((ds + 3) / 4))
> + return MLX5_TXCMP_CODE_EXIT;
> + /*
> + * Build the ordinary SEND WQE:
> + * - Control Segment
> + * - Ethernet Segment, inline inlen_mode
> bytes
> + * - Data Segment of pointer type
> + */
> + wqe = txq->wqes + (txq->wqe_ci & txq-
> >wqe_m);
> + loc->wqe_last = wqe;
> + mlx5_tx_cseg_init(txq, loc, wqe, ds,
> + MLX5_OPCODE_SEND, olx);
> + dseg = mlx5_tx_eseg_data(txq, loc, wqe,
> vlan,
> + txq->inlen_mode,
> + 0, olx);
> + dptr = rte_pktmbuf_mtod(loc->mbuf,
> uint8_t *) +
> + txq->inlen_mode - vlan;
> + inlen -= txq->inlen_mode;
> + mlx5_tx_dseg_ptr(txq, loc, dseg,
> + dptr, inlen, olx);
> + /*
> + * WQE is built, update the loop parameters
> + * and got to the next packet.
> + */
> + txq->wqe_ci += (ds + 3) / 4;
> + loc->wqe_free -= (ds + 3) / 4;
> + /* We have to store mbuf in elts.*/
> +
> MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> + txq->elts[txq->elts_head++ & txq->elts_m] =
> + loc->mbuf;
> + --loc->elts_free;
> + } else {
> + uint8_t *dptr;
> + unsigned int dlen;
> +
> + /*
> + * Partially inlined packet data WQE, we have
> + * some space in title WQEBB, we can fill it
> + * with some packet data. It takes one
> WQEBB,
> + * it is available, no extra space check:
> + * - Control Segment, SEND opcode
> + * - Ethernet Segment, no VLAN insertion
> + * - MLX5_ESEG_MIN_INLINE_SIZE bytes of
> Data
> + * - Data Segment, pointer type
> + *
> + * We also get here if VLAN insertion is not
> + * supported by HW, the inline is enabled.
> + */
> +single_part_inline:
> + wqe = txq->wqes + (txq->wqe_ci & txq-
> >wqe_m);
> + loc->wqe_last = wqe;
> + mlx5_tx_cseg_init(txq, loc, wqe, 4,
> + MLX5_OPCODE_SEND, olx);
> + mlx5_tx_eseg_dmin(txq, loc, wqe, vlan, olx);
> + dptr = rte_pktmbuf_mtod(loc->mbuf,
> uint8_t *) +
> + MLX5_ESEG_MIN_INLINE_SIZE - vlan;
> + /*
> + * The length check is performed above, by
> + * comparing with txq->inlen_send. We
> should
> + * not get overflow here.
> + */
> + MLX5_ASSERT(inlen >
> MLX5_ESEG_MIN_INLINE_SIZE);
> + dlen = inlen - MLX5_ESEG_MIN_INLINE_SIZE;
> + mlx5_tx_dseg_ptr(txq, loc, &wqe->dseg[1],
> + dptr, dlen, olx);
> + ++txq->wqe_ci;
> + --loc->wqe_free;
> + /* We have to store mbuf in elts.*/
> +
> MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
> + txq->elts[txq->elts_head++ & txq->elts_m] =
> + loc->mbuf;
> + --loc->elts_free;
> + }
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes counter. */
> + txq->stats.obytes += vlan +
> + rte_pktmbuf_data_len(loc->mbuf);
> +#endif
> + } else {
> + /*
> + * No inline at all, it means the CPU cycles saving
> + * is prioritized at configuration, we should not
> + * copy any packet data to WQE.
> + *
> + * SEND WQE, one WQEBB:
> + * - Control Segment, SEND opcode
> + * - Ethernet Segment, optional VLAN, no inline
> + * - Data Segment, pointer type
> + */
> +single_no_inline:
> + wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
> + loc->wqe_last = wqe;
> + mlx5_tx_cseg_init(txq, loc, wqe, 3,
> + MLX5_OPCODE_SEND, olx);
> + mlx5_tx_eseg_none(txq, loc, wqe, olx);
> + mlx5_tx_dseg_ptr
> + (txq, loc, &wqe->dseg[0],
> + rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
> + rte_pktmbuf_data_len(loc->mbuf), olx);
> + ++txq->wqe_ci;
> + --loc->wqe_free;
> + /*
> + * We should not store mbuf pointer in elts
> + * if no inlining is configured, this is done
> + * by calling routine in a batch copy.
> + */
> + MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
> + --loc->elts_free;
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Update sent data bytes counter. */
> + txq->stats.obytes += rte_pktmbuf_data_len(loc-
> >mbuf);
> + if (MLX5_TXOFF_CONFIG(VLAN) &&
> + loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
> + txq->stats.obytes +=
> + sizeof(struct rte_vlan_hdr);
> +#endif
> + }
> + ++loc->pkts_sent;
> + --pkts_n;
> + if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
> + return MLX5_TXCMP_CODE_EXIT;
> + loc->mbuf = *pkts++;
> + if (pkts_n > 1)
> + rte_prefetch0(*pkts);
> + ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
> + if (unlikely(ret != MLX5_TXCMP_CODE_SINGLE))
> + return ret;
> + }
> + MLX5_ASSERT(false);
> +}
> +
> +static __rte_always_inline enum mlx5_txcmp_code
> +mlx5_tx_burst_single(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + unsigned int pkts_n,
> + struct mlx5_txq_local *__rte_restrict loc,
> + unsigned int olx)
> +{
> + enum mlx5_txcmp_code ret;
> +
> + ret = mlx5_tx_able_to_empw(txq, loc, olx, false);
> + if (ret == MLX5_TXCMP_CODE_SINGLE)
> + goto ordinary_send;
> + MLX5_ASSERT(ret == MLX5_TXCMP_CODE_EMPW);
> + for (;;) {
> + /* Optimize for inline/no inline eMPW send. */
> + ret = (MLX5_TXOFF_CONFIG(INLINE)) ?
> + mlx5_tx_burst_empw_inline
> + (txq, pkts, pkts_n, loc, olx) :
> + mlx5_tx_burst_empw_simple
> + (txq, pkts, pkts_n, loc, olx);
> + if (ret != MLX5_TXCMP_CODE_SINGLE)
> + return ret;
> + /* The resources to send one packet should remain. */
> + MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> +ordinary_send:
> + ret = mlx5_tx_burst_single_send(txq, pkts, pkts_n, loc, olx);
> + MLX5_ASSERT(ret != MLX5_TXCMP_CODE_SINGLE);
> + if (ret != MLX5_TXCMP_CODE_EMPW)
> + return ret;
> + /* The resources to send one packet should remain. */
> + MLX5_ASSERT(loc->elts_free && loc->wqe_free);
> + }
> +}
> +
> +/**
> + * DPDK Tx callback template. This is configured template used to generate
> + * routines optimized for specified offload setup.
> + * One of this generated functions is chosen at SQ configuration time.
> + *
> + * @param txq
> + * Generic pointer to TX queue structure.
> + * @param[in] pkts
> + * Packets to transmit.
> + * @param pkts_n
> + * Number of packets in array.
> + * @param olx
> + * Configured offloads mask, presents the bits of
> MLX5_TXOFF_CONFIG_xxx
> + * values. Should be static to take compile time static configuration
> + * advantages.
> + *
> + * @return
> + * Number of packets successfully transmitted (<= pkts_n).
> + */
> +static __rte_always_inline uint16_t
> +mlx5_tx_burst_tmpl(struct mlx5_txq_data *__rte_restrict txq,
> + struct rte_mbuf **__rte_restrict pkts,
> + uint16_t pkts_n,
> + unsigned int olx)
> +{
> + struct mlx5_txq_local loc;
> + enum mlx5_txcmp_code ret;
> + unsigned int part;
> +
> + MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq-
> >elts_tail));
> + MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq-
> >wqe_pi));
> + if (unlikely(!pkts_n))
> + return 0;
> + if (MLX5_TXOFF_CONFIG(INLINE))
> + loc.mbuf_free = 0;
> + loc.pkts_sent = 0;
> + loc.pkts_copy = 0;
> + loc.wqe_last = NULL;
> +
> +send_loop:
> + loc.pkts_loop = loc.pkts_sent;
> + /*
> + * Check if there are some CQEs, if any:
> + * - process an encountered errors
> + * - process the completed WQEs
> + * - free related mbufs
> + * - doorbell the NIC about processed CQEs
> + */
> + rte_prefetch0(*(pkts + loc.pkts_sent));
> + mlx5_tx_handle_completion(txq, olx);
> + /*
> + * Calculate the number of available resources - elts and WQEs.
> + * There are two possible different scenarios:
> + * - no data inlining into WQEs, one WQEBB may contains up to
> + * four packets, in this case elts become scarce resource
> + * - data inlining into WQEs, one packet may require multiple
> + * WQEBBs, the WQEs become the limiting factor.
> + */
> + MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq-
> >elts_tail));
> + loc.elts_free = txq->elts_s -
> + (uint16_t)(txq->elts_head - txq->elts_tail);
> + MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq-
> >wqe_pi));
> + loc.wqe_free = txq->wqe_s -
> + (uint16_t)(txq->wqe_ci - txq->wqe_pi);
> + if (unlikely(!loc.elts_free || !loc.wqe_free))
> + goto burst_exit;
> + for (;;) {
> + /*
> + * Fetch the packet from array. Usually this is the first
> + * packet in series of multi/single segment packets.
> + */
> + loc.mbuf = *(pkts + loc.pkts_sent);
> + /* Dedicated branch for multi-segment packets. */
> + if (MLX5_TXOFF_CONFIG(MULTI) &&
> + unlikely(NB_SEGS(loc.mbuf) > 1)) {
> + /*
> + * Multi-segment packet encountered.
> + * Hardware is able to process it only
> + * with SEND/TSO opcodes, one packet
> + * per WQE, do it in dedicated routine.
> + */
> +enter_send_multi:
> + MLX5_ASSERT(loc.pkts_sent >= loc.pkts_copy);
> + part = loc.pkts_sent - loc.pkts_copy;
> + if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
> + /*
> + * There are some single-segment mbufs not
> + * stored in elts. The mbufs must be in the
> + * same order as WQEs, so we must copy the
> + * mbufs to elts here, before the coming
> + * multi-segment packet mbufs is appended.
> + */
> + mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy,
> + part, olx);
> + loc.pkts_copy = loc.pkts_sent;
> + }
> + MLX5_ASSERT(pkts_n > loc.pkts_sent);
> + ret = mlx5_tx_burst_mseg(txq, pkts, pkts_n, &loc,
> olx);
> + if (!MLX5_TXOFF_CONFIG(INLINE))
> + loc.pkts_copy = loc.pkts_sent;
> + /*
> + * These returned code checks are supposed
> + * to be optimized out due to routine inlining.
> + */
> + if (ret == MLX5_TXCMP_CODE_EXIT) {
> + /*
> + * The routine returns this code when
> + * all packets are sent or there is no
> + * enough resources to complete request.
> + */
> + break;
> + }
> + if (ret == MLX5_TXCMP_CODE_ERROR) {
> + /*
> + * The routine returns this code when some
> error
> + * in the incoming packets format occurred.
> + */
> + txq->stats.oerrors++;
> + break;
> + }
> + if (ret == MLX5_TXCMP_CODE_SINGLE) {
> + /*
> + * The single-segment packet was
> encountered
> + * in the array, try to send it with the
> + * best optimized way, possible engaging
> eMPW.
> + */
> + goto enter_send_single;
> + }
> + if (MLX5_TXOFF_CONFIG(TSO) &&
> + ret == MLX5_TXCMP_CODE_TSO) {
> + /*
> + * The single-segment TSO packet was
> + * encountered in the array.
> + */
> + goto enter_send_tso;
> + }
> + /* We must not get here. Something is going wrong.
> */
> + MLX5_ASSERT(false);
> + txq->stats.oerrors++;
> + break;
> + }
> + /* Dedicated branch for single-segment TSO packets. */
> + if (MLX5_TXOFF_CONFIG(TSO) &&
> + unlikely(loc.mbuf->ol_flags & PKT_TX_TCP_SEG)) {
> + /*
> + * TSO might require special way for inlining
> + * (dedicated parameters) and is sent with
> + * MLX5_OPCODE_TSO opcode only, provide this
> + * in dedicated branch.
> + */
> +enter_send_tso:
> + MLX5_ASSERT(NB_SEGS(loc.mbuf) == 1);
> + MLX5_ASSERT(pkts_n > loc.pkts_sent);
> + ret = mlx5_tx_burst_tso(txq, pkts, pkts_n, &loc, olx);
> + /*
> + * These returned code checks are supposed
> + * to be optimized out due to routine inlining.
> + */
> + if (ret == MLX5_TXCMP_CODE_EXIT)
> + break;
> + if (ret == MLX5_TXCMP_CODE_ERROR) {
> + txq->stats.oerrors++;
> + break;
> + }
> + if (ret == MLX5_TXCMP_CODE_SINGLE)
> + goto enter_send_single;
> + if (MLX5_TXOFF_CONFIG(MULTI) &&
> + ret == MLX5_TXCMP_CODE_MULTI) {
> + /*
> + * The multi-segment packet was
> + * encountered in the array.
> + */
> + goto enter_send_multi;
> + }
> + /* We must not get here. Something is going wrong.
> */
> + MLX5_ASSERT(false);
> + txq->stats.oerrors++;
> + break;
> + }
> + /*
> + * The dedicated branch for the single-segment packets
> + * without TSO. Often these ones can be sent using
> + * MLX5_OPCODE_EMPW with multiple packets in one WQE.
> + * The routine builds the WQEs till it encounters
> + * the TSO or multi-segment packet (in case if these
> + * offloads are requested at SQ configuration time).
> + */
> +enter_send_single:
> + MLX5_ASSERT(pkts_n > loc.pkts_sent);
> + ret = mlx5_tx_burst_single(txq, pkts, pkts_n, &loc, olx);
> + /*
> + * These returned code checks are supposed
> + * to be optimized out due to routine inlining.
> + */
> + if (ret == MLX5_TXCMP_CODE_EXIT)
> + break;
> + if (ret == MLX5_TXCMP_CODE_ERROR) {
> + txq->stats.oerrors++;
> + break;
> + }
> + if (MLX5_TXOFF_CONFIG(MULTI) &&
> + ret == MLX5_TXCMP_CODE_MULTI) {
> + /*
> + * The multi-segment packet was
> + * encountered in the array.
> + */
> + goto enter_send_multi;
> + }
> + if (MLX5_TXOFF_CONFIG(TSO) &&
> + ret == MLX5_TXCMP_CODE_TSO) {
> + /*
> + * The single-segment TSO packet was
> + * encountered in the array.
> + */
> + goto enter_send_tso;
> + }
> + /* We must not get here. Something is going wrong. */
> + MLX5_ASSERT(false);
> + txq->stats.oerrors++;
> + break;
> + }
> + /*
> + * Main Tx loop is completed, do the rest:
> + * - set completion request if thresholds are reached
> + * - doorbell the hardware
> + * - copy the rest of mbufs to elts (if any)
> + */
> + MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE) ||
> + loc.pkts_sent >= loc.pkts_copy);
> + /* Take a shortcut if nothing is sent. */
> + if (unlikely(loc.pkts_sent == loc.pkts_loop))
> + goto burst_exit;
> + /* Request CQE generation if limits are reached. */
> + mlx5_tx_request_completion(txq, &loc, olx);
> + /*
> + * Ring QP doorbell immediately after WQE building completion
> + * to improve latencies. The pure software related data treatment
> + * can be completed after doorbell. Tx CQEs for this SQ are
> + * processed in this thread only by the polling.
> + *
> + * The rdma core library can map doorbell register in two ways,
> + * depending on the environment variable "MLX5_SHUT_UP_BF":
> + *
> + * - as regular cached memory, the variable is either missing or
> + * set to zero. This type of mapping may cause the significant
> + * doorbell register writing latency and requires explicit memory
> + * write barrier to mitigate this issue and prevent write combining.
> + *
> + * - as non-cached memory, the variable is present and set to not "0"
> + * value. This type of mapping may cause performance impact under
> + * heavy loading conditions but the explicit write memory barrier is
> + * not required and it may improve core performance.
> + *
> + * - the legacy behaviour (prior 19.08 release) was to use some
> + * heuristics to decide whether write memory barrier should
> + * be performed. This behavior is supported with specifying
> + * tx_db_nc=2, write barrier is skipped if application provides
> + * the full recommended burst of packets, it supposes the next
> + * packets are coming and the write barrier will be issued on
> + * the next burst (after descriptor writing, at least).
> + */
> + mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, !txq->db_nc &&
> + (!txq->db_heu || pkts_n %
> MLX5_TX_DEFAULT_BURST));
> + /* Not all of the mbufs may be stored into elts yet. */
> + part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent -
> loc.pkts_copy;
> + if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
> + /*
> + * There are some single-segment mbufs not stored in elts.
> + * It can be only if the last packet was single-segment.
> + * The copying is gathered into one place due to it is
> + * a good opportunity to optimize that with SIMD.
> + * Unfortunately if inlining is enabled the gaps in pointer
> + * array may happen due to early freeing of the inlined
> mbufs.
> + */
> + mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy, part, olx);
> + loc.pkts_copy = loc.pkts_sent;
> + }
> + MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq-
> >elts_tail));
> + MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq-
> >wqe_pi));
> + if (pkts_n > loc.pkts_sent) {
> + /*
> + * If burst size is large there might be no enough CQE
> + * fetched from completion queue and no enough resources
> + * freed to send all the packets.
> + */
> + goto send_loop;
> + }
> +burst_exit:
> +#ifdef MLX5_PMD_SOFT_COUNTERS
> + /* Increment sent packets counter. */
> + txq->stats.opackets += loc.pkts_sent;
> +#endif
> + if (MLX5_TXOFF_CONFIG(INLINE) && loc.mbuf_free)
> + __mlx5_tx_free_mbuf(txq, pkts, loc.mbuf_free, olx);
> + return loc.pkts_sent;
> +}
> +
> #endif /* RTE_PMD_MLX5_TX_H_ */
> --
> 1.8.3.1
@@ -28,57 +28,6 @@
#include "mlx5_rx.h"
#include "mlx5_tx.h"
-/* TX burst subroutines return codes. */
-enum mlx5_txcmp_code {
- MLX5_TXCMP_CODE_EXIT = 0,
- MLX5_TXCMP_CODE_ERROR,
- MLX5_TXCMP_CODE_SINGLE,
- MLX5_TXCMP_CODE_MULTI,
- MLX5_TXCMP_CODE_TSO,
- MLX5_TXCMP_CODE_EMPW,
-};
-
-/*
- * These defines are used to configure Tx burst routine option set
- * supported at compile time. The not specified options are optimized out
- * out due to if conditions can be explicitly calculated at compile time.
- * The offloads with bigger runtime check (require more CPU cycles to
- * skip) overhead should have the bigger index - this is needed to
- * select the better matching routine function if no exact match and
- * some offloads are not actually requested.
- */
-#define MLX5_TXOFF_CONFIG_MULTI (1u << 0) /* Multi-segment packets.*/
-#define MLX5_TXOFF_CONFIG_TSO (1u << 1) /* TCP send offload supported.*/
-#define MLX5_TXOFF_CONFIG_SWP (1u << 2) /* Tunnels/SW Parser offloads.*/
-#define MLX5_TXOFF_CONFIG_CSUM (1u << 3) /* Check Sums offloaded. */
-#define MLX5_TXOFF_CONFIG_INLINE (1u << 4) /* Data inlining supported. */
-#define MLX5_TXOFF_CONFIG_VLAN (1u << 5) /* VLAN insertion supported.*/
-#define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
-#define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW supported.*/
-#define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW supported.*/
-#define MLX5_TXOFF_CONFIG_TXPP (1u << 10) /* Scheduling on timestamp.*/
-
-/* The most common offloads groups. */
-#define MLX5_TXOFF_CONFIG_NONE 0
-#define MLX5_TXOFF_CONFIG_FULL (MLX5_TXOFF_CONFIG_MULTI | \
- MLX5_TXOFF_CONFIG_TSO | \
- MLX5_TXOFF_CONFIG_SWP | \
- MLX5_TXOFF_CONFIG_CSUM | \
- MLX5_TXOFF_CONFIG_INLINE | \
- MLX5_TXOFF_CONFIG_VLAN | \
- MLX5_TXOFF_CONFIG_METADATA)
-
-#define MLX5_TXOFF_CONFIG(mask) (olx & MLX5_TXOFF_CONFIG_##mask)
-
-#define MLX5_TXOFF_DECL(func, olx) \
-static uint16_t mlx5_tx_burst_##func(void *txq, \
- struct rte_mbuf **pkts, \
- uint16_t pkts_n) \
-{ \
- return mlx5_tx_burst_tmpl((struct mlx5_txq_data *)txq, \
- pkts, pkts_n, (olx)); \
-}
-
#define MLX5_TXOFF_INFO(func, olx) {mlx5_tx_burst_##func, olx},
/* static asserts */
@@ -139,7 +88,6 @@ enum mlx5_txcmp_code {
uint8_t mlx5_swp_types_table[1 << 10] __rte_cache_aligned;
uint64_t rte_net_mlx5_dynf_inline_mask;
-#define PKT_TX_DYNF_NOINLINE rte_net_mlx5_dynf_inline_mask
/**
* Build a table to translate Rx completion flags to packet type.
@@ -366,109 +314,6 @@ enum mlx5_txcmp_code {
}
}
-/**
- * Set Software Parser flags and offsets in Ethernet Segment of WQE.
- * Flags must be preliminary initialized to zero.
- *
- * @param loc
- * Pointer to burst routine local context.
- * @param swp_flags
- * Pointer to store Software Parser flags
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Software Parser offsets packed in dword.
- * Software Parser flags are set by pointer.
- */
-static __rte_always_inline uint32_t
-txq_mbuf_to_swp(struct mlx5_txq_local *__rte_restrict loc,
- uint8_t *swp_flags,
- unsigned int olx)
-{
- uint64_t ol, tunnel;
- unsigned int idx, off;
- uint32_t set;
-
- if (!MLX5_TXOFF_CONFIG(SWP))
- return 0;
- ol = loc->mbuf->ol_flags;
- tunnel = ol & PKT_TX_TUNNEL_MASK;
- /*
- * Check whether Software Parser is required.
- * Only customized tunnels may ask for.
- */
- if (likely(tunnel != PKT_TX_TUNNEL_UDP && tunnel != PKT_TX_TUNNEL_IP))
- return 0;
- /*
- * The index should have:
- * bit[0:1] = PKT_TX_L4_MASK
- * bit[4] = PKT_TX_IPV6
- * bit[8] = PKT_TX_OUTER_IPV6
- * bit[9] = PKT_TX_OUTER_UDP
- */
- idx = (ol & (PKT_TX_L4_MASK | PKT_TX_IPV6 | PKT_TX_OUTER_IPV6)) >> 52;
- idx |= (tunnel == PKT_TX_TUNNEL_UDP) ? (1 << 9) : 0;
- *swp_flags = mlx5_swp_types_table[idx];
- /*
- * Set offsets for SW parser. Since ConnectX-5, SW parser just
- * complements HW parser. SW parser starts to engage only if HW parser
- * can't reach a header. For the older devices, HW parser will not kick
- * in if any of SWP offsets is set. Therefore, all of the L3 offsets
- * should be set regardless of HW offload.
- */
- off = loc->mbuf->outer_l2_len;
- if (MLX5_TXOFF_CONFIG(VLAN) && ol & PKT_TX_VLAN_PKT)
- off += sizeof(struct rte_vlan_hdr);
- set = (off >> 1) << 8; /* Outer L3 offset. */
- off += loc->mbuf->outer_l3_len;
- if (tunnel == PKT_TX_TUNNEL_UDP)
- set |= off >> 1; /* Outer L4 offset. */
- if (ol & (PKT_TX_IPV4 | PKT_TX_IPV6)) { /* Inner IP. */
- const uint64_t csum = ol & PKT_TX_L4_MASK;
- off += loc->mbuf->l2_len;
- set |= (off >> 1) << 24; /* Inner L3 offset. */
- if (csum == PKT_TX_TCP_CKSUM ||
- csum == PKT_TX_UDP_CKSUM ||
- (MLX5_TXOFF_CONFIG(TSO) && ol & PKT_TX_TCP_SEG)) {
- off += loc->mbuf->l3_len;
- set |= (off >> 1) << 16; /* Inner L4 offset. */
- }
- }
- set = rte_cpu_to_le_32(set);
- return set;
-}
-
-/**
- * Convert the Checksum offloads to Verbs.
- *
- * @param buf
- * Pointer to the mbuf.
- *
- * @return
- * Converted checksum flags.
- */
-static __rte_always_inline uint8_t
-txq_ol_cksum_to_cs(struct rte_mbuf *buf)
-{
- uint32_t idx;
- uint8_t is_tunnel = !!(buf->ol_flags & PKT_TX_TUNNEL_MASK);
- const uint64_t ol_flags_mask = PKT_TX_TCP_SEG | PKT_TX_L4_MASK |
- PKT_TX_IP_CKSUM | PKT_TX_OUTER_IP_CKSUM;
-
- /*
- * The index should have:
- * bit[0] = PKT_TX_TCP_SEG
- * bit[2:3] = PKT_TX_UDP_CKSUM, PKT_TX_TCP_CKSUM
- * bit[4] = PKT_TX_IP_CKSUM
- * bit[8] = PKT_TX_OUTER_IP_CKSUM
- * bit[9] = tunnel
- */
- idx = ((buf->ol_flags & ol_flags_mask) >> 50) | (!!is_tunnel << 9);
- return mlx5_cksum_table[idx];
-}
-
#define MLX5_SYSTEM_LOG_DIR "/var/log"
/**
* Dump debug information to log file.
@@ -720,214 +565,6 @@ enum mlx5_txcmp_code {
}
/**
- * Free the mbufs from the linear array of pointers.
- *
- * @param txq
- * Pointer to Tx queue structure.
- * @param pkts
- * Pointer to array of packets to be free.
- * @param pkts_n
- * Number of packets to be freed.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- unsigned int pkts_n,
- unsigned int olx __rte_unused)
-{
- struct rte_mempool *pool = NULL;
- struct rte_mbuf **p_free = NULL;
- struct rte_mbuf *mbuf;
- unsigned int n_free = 0;
-
- /*
- * The implemented algorithm eliminates
- * copying pointers to temporary array
- * for rte_mempool_put_bulk() calls.
- */
- MLX5_ASSERT(pkts);
- MLX5_ASSERT(pkts_n);
- /*
- * Free mbufs directly to the pool in bulk
- * if fast free offload is engaged
- */
- if (!MLX5_TXOFF_CONFIG(MULTI) && txq->fast_free) {
- mbuf = *pkts;
- pool = mbuf->pool;
- rte_mempool_put_bulk(pool, (void *)pkts, pkts_n);
- return;
- }
- for (;;) {
- for (;;) {
- /*
- * Decrement mbuf reference counter, detach
- * indirect and external buffers if needed.
- */
- mbuf = rte_pktmbuf_prefree_seg(*pkts);
- if (likely(mbuf != NULL)) {
- MLX5_ASSERT(mbuf == *pkts);
- if (likely(n_free != 0)) {
- if (unlikely(pool != mbuf->pool))
- /* From different pool. */
- break;
- } else {
- /* Start new scan array. */
- pool = mbuf->pool;
- p_free = pkts;
- }
- ++n_free;
- ++pkts;
- --pkts_n;
- if (unlikely(pkts_n == 0)) {
- mbuf = NULL;
- break;
- }
- } else {
- /*
- * This happens if mbuf is still referenced.
- * We can't put it back to the pool, skip.
- */
- ++pkts;
- --pkts_n;
- if (unlikely(n_free != 0))
- /* There is some array to free.*/
- break;
- if (unlikely(pkts_n == 0))
- /* Last mbuf, nothing to free. */
- return;
- }
- }
- for (;;) {
- /*
- * This loop is implemented to avoid multiple
- * inlining of rte_mempool_put_bulk().
- */
- MLX5_ASSERT(pool);
- MLX5_ASSERT(p_free);
- MLX5_ASSERT(n_free);
- /*
- * Free the array of pre-freed mbufs
- * belonging to the same memory pool.
- */
- rte_mempool_put_bulk(pool, (void *)p_free, n_free);
- if (unlikely(mbuf != NULL)) {
- /* There is the request to start new scan. */
- pool = mbuf->pool;
- p_free = pkts++;
- n_free = 1;
- --pkts_n;
- if (likely(pkts_n != 0))
- break;
- /*
- * This is the last mbuf to be freed.
- * Do one more loop iteration to complete.
- * This is rare case of the last unique mbuf.
- */
- mbuf = NULL;
- continue;
- }
- if (likely(pkts_n == 0))
- return;
- n_free = 0;
- break;
- }
- }
-}
-/*
- * No inline version to free buffers for optimal call
- * on the tx_burst completion.
- */
-static __rte_noinline void
-__mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- unsigned int pkts_n,
- unsigned int olx __rte_unused)
-{
- mlx5_tx_free_mbuf(txq, pkts, pkts_n, olx);
-}
-
-/**
- * Free the mbuf from the elts ring buffer till new tail.
- *
- * @param txq
- * Pointer to Tx queue structure.
- * @param tail
- * Index in elts to free up to, becomes new elts tail.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_free_elts(struct mlx5_txq_data *__rte_restrict txq,
- uint16_t tail,
- unsigned int olx __rte_unused)
-{
- uint16_t n_elts = tail - txq->elts_tail;
-
- MLX5_ASSERT(n_elts);
- MLX5_ASSERT(n_elts <= txq->elts_s);
- /*
- * Implement a loop to support ring buffer wraparound
- * with single inlining of mlx5_tx_free_mbuf().
- */
- do {
- unsigned int part;
-
- part = txq->elts_s - (txq->elts_tail & txq->elts_m);
- part = RTE_MIN(part, n_elts);
- MLX5_ASSERT(part);
- MLX5_ASSERT(part <= txq->elts_s);
- mlx5_tx_free_mbuf(txq,
- &txq->elts[txq->elts_tail & txq->elts_m],
- part, olx);
- txq->elts_tail += part;
- n_elts -= part;
- } while (n_elts);
-}
-
-/**
- * Store the mbuf being sent into elts ring buffer.
- * On Tx completion these mbufs will be freed.
- *
- * @param txq
- * Pointer to Tx queue structure.
- * @param pkts
- * Pointer to array of packets to be stored.
- * @param pkts_n
- * Number of packets to be stored.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_copy_elts(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- unsigned int pkts_n,
- unsigned int olx __rte_unused)
-{
- unsigned int part;
- struct rte_mbuf **elts = (struct rte_mbuf **)txq->elts;
-
- MLX5_ASSERT(pkts);
- MLX5_ASSERT(pkts_n);
- part = txq->elts_s - (txq->elts_head & txq->elts_m);
- MLX5_ASSERT(part);
- MLX5_ASSERT(part <= txq->elts_s);
- /* This code is a good candidate for vectorizing with SIMD. */
- rte_memcpy((void *)(elts + (txq->elts_head & txq->elts_m)),
- (void *)pkts,
- RTE_MIN(part, pkts_n) * sizeof(struct rte_mbuf *));
- txq->elts_head += pkts_n;
- if (unlikely(part < pkts_n))
- /* The copy is wrapping around the elts array. */
- rte_memcpy((void *)elts, (void *)(pkts + part),
- (pkts_n - part) * sizeof(struct rte_mbuf *));
-}
-
-/**
* Update completion queue consuming index via doorbell
* and flush the completed data buffers.
*
@@ -970,7 +607,7 @@ enum mlx5_txcmp_code {
* NOTE: not inlined intentionally, it makes tx_burst
* routine smaller, simple and faster - from experiments.
*/
-static void
+void
mlx5_tx_handle_completion(struct mlx5_txq_data *__rte_restrict txq,
unsigned int olx __rte_unused)
{
@@ -1047,54 +684,6 @@ enum mlx5_txcmp_code {
}
/**
- * Check if the completion request flag should be set in the last WQE.
- * Both pushed mbufs and WQEs are monitored and the completion request
- * flag is set if any of thresholds is reached.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_request_completion(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- uint16_t head = txq->elts_head;
- unsigned int part;
-
- part = MLX5_TXOFF_CONFIG(INLINE) ?
- 0 : loc->pkts_sent - loc->pkts_copy;
- head += part;
- if ((uint16_t)(head - txq->elts_comp) >= MLX5_TX_COMP_THRESH ||
- (MLX5_TXOFF_CONFIG(INLINE) &&
- (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
- volatile struct mlx5_wqe *last = loc->wqe_last;
-
- MLX5_ASSERT(last);
- txq->elts_comp = head;
- if (MLX5_TXOFF_CONFIG(INLINE))
- txq->wqe_comp = txq->wqe_ci;
- /* Request unconditional completion on last WQE. */
- last->cseg.flags = RTE_BE32(MLX5_COMP_ALWAYS <<
- MLX5_COMP_MODE_OFFSET);
- /* Save elts_head in dedicated free on completion queue. */
-#ifdef RTE_LIBRTE_MLX5_DEBUG
- txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head |
- (last->cseg.opcode >> 8) << 16;
-#else
- txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head;
-#endif
- /* A CQE slot must always be available. */
- MLX5_ASSERT((txq->cq_pi - txq->cq_ci) <= txq->cqe_s);
- }
-}
-
-/**
* DPDK callback to check the status of a tx descriptor.
*
* @param tx_queue
@@ -1118,2924 +707,6 @@ enum mlx5_txcmp_code {
return RTE_ETH_TX_DESC_DONE;
}
-/**
- * Build the Control Segment with specified opcode:
- * - MLX5_OPCODE_SEND
- * - MLX5_OPCODE_ENHANCED_MPSW
- * - MLX5_OPCODE_TSO
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Control Segment.
- * @param ds
- * Supposed length of WQE in segments.
- * @param opcode
- * SQ WQE opcode to put into Control Segment.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_cseg_init(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc __rte_unused,
- struct mlx5_wqe *__rte_restrict wqe,
- unsigned int ds,
- unsigned int opcode,
- unsigned int olx __rte_unused)
-{
- struct mlx5_wqe_cseg *__rte_restrict cs = &wqe->cseg;
-
- /* For legacy MPW replace the EMPW by TSO with modifier. */
- if (MLX5_TXOFF_CONFIG(MPW) && opcode == MLX5_OPCODE_ENHANCED_MPSW)
- opcode = MLX5_OPCODE_TSO | MLX5_OPC_MOD_MPW << 24;
- cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
- cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
- cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
- MLX5_COMP_MODE_OFFSET);
- cs->misc = RTE_BE32(0);
-}
-
-/**
- * Build the Synchronize Queue Segment with specified completion index.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Control Segment.
- * @param wci
- * Completion index in Clock Queue to wait.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_wseg_init(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc __rte_unused,
- struct mlx5_wqe *restrict wqe,
- unsigned int wci,
- unsigned int olx __rte_unused)
-{
- struct mlx5_wqe_qseg *qs;
-
- qs = RTE_PTR_ADD(wqe, MLX5_WSEG_SIZE);
- qs->max_index = rte_cpu_to_be_32(wci);
- qs->qpn_cqn = rte_cpu_to_be_32(txq->sh->txpp.clock_queue.cq_obj.cq->id);
- qs->reserved0 = RTE_BE32(0);
- qs->reserved1 = RTE_BE32(0);
-}
-
-/**
- * Build the Ethernet Segment without inlined data.
- * Supports Software Parser, Checksums and VLAN
- * insertion Tx offload features.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet Segment.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_eseg_none(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
- struct mlx5_txq_local *__rte_restrict loc,
- struct mlx5_wqe *__rte_restrict wqe,
- unsigned int olx)
-{
- struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
- uint32_t csum;
-
- /*
- * Calculate and set check sum flags first, dword field
- * in segment may be shared with Software Parser flags.
- */
- csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
- es->flags = rte_cpu_to_le_32(csum);
- /*
- * Calculate and set Software Parser offsets and flags.
- * These flags a set for custom UDP and IP tunnel packets.
- */
- es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
- /* Fill metadata field if needed. */
- es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
- /* Engage VLAN tag insertion feature if requested. */
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
- /*
- * We should get here only if device support
- * this feature correctly.
- */
- MLX5_ASSERT(txq->vlan_en);
- es->inline_hdr = rte_cpu_to_be_32(MLX5_ETH_WQE_VLAN_INSERT |
- loc->mbuf->vlan_tci);
- } else {
- es->inline_hdr = RTE_BE32(0);
- }
-}
-
-/**
- * Build the Ethernet Segment with minimal inlined data
- * of MLX5_ESEG_MIN_INLINE_SIZE bytes length. This is
- * used to fill the gap in single WQEBB WQEs.
- * Supports Software Parser, Checksums and VLAN
- * insertion Tx offload features.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet Segment.
- * @param vlan
- * Length of VLAN tag insertion if any.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_eseg_dmin(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
- struct mlx5_txq_local *__rte_restrict loc,
- struct mlx5_wqe *__rte_restrict wqe,
- unsigned int vlan,
- unsigned int olx)
-{
- struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
- uint32_t csum;
- uint8_t *psrc, *pdst;
-
- /*
- * Calculate and set check sum flags first, dword field
- * in segment may be shared with Software Parser flags.
- */
- csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
- es->flags = rte_cpu_to_le_32(csum);
- /*
- * Calculate and set Software Parser offsets and flags.
- * These flags a set for custom UDP and IP tunnel packets.
- */
- es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
- /* Fill metadata field if needed. */
- es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
- psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
- es->inline_hdr_sz = RTE_BE16(MLX5_ESEG_MIN_INLINE_SIZE);
- es->inline_data = *(unaligned_uint16_t *)psrc;
- psrc += sizeof(uint16_t);
- pdst = (uint8_t *)(es + 1);
- if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
- /* Implement VLAN tag insertion as part inline data. */
- memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
- pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
- psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
- /* Insert VLAN ethertype + VLAN tag. */
- *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
- ((RTE_ETHER_TYPE_VLAN << 16) |
- loc->mbuf->vlan_tci);
- pdst += sizeof(struct rte_vlan_hdr);
- /* Copy the rest two bytes from packet data. */
- MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
- *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
- } else {
- /* Fill the gap in the title WQEBB with inline data. */
- rte_mov16(pdst, psrc);
- }
-}
-
-/**
- * Build the Ethernet Segment with entire packet
- * data inlining. Checks the boundary of WQEBB and
- * ring buffer wrapping, supports Software Parser,
- * Checksums and VLAN insertion Tx offload features.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet Segment.
- * @param vlan
- * Length of VLAN tag insertion if any.
- * @param inlen
- * Length of data to inline (VLAN included, if any).
- * @param tso
- * TSO flag, set mss field from the packet.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Pointer to the next Data Segment (aligned and wrapped around).
- */
-static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_eseg_data(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- struct mlx5_wqe *__rte_restrict wqe,
- unsigned int vlan,
- unsigned int inlen,
- unsigned int tso,
- unsigned int olx)
-{
- struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
- uint32_t csum;
- uint8_t *psrc, *pdst;
- unsigned int part;
-
- /*
- * Calculate and set check sum flags first, dword field
- * in segment may be shared with Software Parser flags.
- */
- csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
- if (tso) {
- csum <<= 24;
- csum |= loc->mbuf->tso_segsz;
- es->flags = rte_cpu_to_be_32(csum);
- } else {
- es->flags = rte_cpu_to_le_32(csum);
- }
- /*
- * Calculate and set Software Parser offsets and flags.
- * These flags a set for custom UDP and IP tunnel packets.
- */
- es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
- /* Fill metadata field if needed. */
- es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
- psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
- es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
- es->inline_data = *(unaligned_uint16_t *)psrc;
- psrc += sizeof(uint16_t);
- pdst = (uint8_t *)(es + 1);
- if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
- /* Implement VLAN tag insertion as part inline data. */
- memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
- pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
- psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
- /* Insert VLAN ethertype + VLAN tag. */
- *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
- ((RTE_ETHER_TYPE_VLAN << 16) |
- loc->mbuf->vlan_tci);
- pdst += sizeof(struct rte_vlan_hdr);
- /* Copy the rest two bytes from packet data. */
- MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
- *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
- psrc += sizeof(uint16_t);
- } else {
- /* Fill the gap in the title WQEBB with inline data. */
- rte_mov16(pdst, psrc);
- psrc += sizeof(rte_v128u32_t);
- }
- pdst = (uint8_t *)(es + 2);
- MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
- MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
- inlen -= MLX5_ESEG_MIN_INLINE_SIZE;
- if (!inlen) {
- MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
- return (struct mlx5_wqe_dseg *)pdst;
- }
- /*
- * The WQEBB space availability is checked by caller.
- * Here we should be aware of WQE ring buffer wraparound only.
- */
- part = (uint8_t *)txq->wqes_end - pdst;
- part = RTE_MIN(part, inlen);
- do {
- rte_memcpy(pdst, psrc, part);
- inlen -= part;
- if (likely(!inlen)) {
- /*
- * If return value is not used by the caller
- * the code below will be optimized out.
- */
- pdst += part;
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
- if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
- pdst = (uint8_t *)txq->wqes;
- return (struct mlx5_wqe_dseg *)pdst;
- }
- pdst = (uint8_t *)txq->wqes;
- psrc += part;
- part = inlen;
- } while (true);
-}
-
-/**
- * Copy data from chain of mbuf to the specified linear buffer.
- * Checksums and VLAN insertion Tx offload features. If data
- * from some mbuf copied completely this mbuf is freed. Local
- * structure is used to keep the byte stream state.
- *
- * @param pdst
- * Pointer to the destination linear buffer.
- * @param loc
- * Pointer to burst routine local context.
- * @param len
- * Length of data to be copied.
- * @param must
- * Length of data to be copied ignoring no inline hint.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Number of actual copied data bytes. This is always greater than or
- * equal to must parameter and might be lesser than len in no inline
- * hint flag is encountered.
- */
-static __rte_always_inline unsigned int
-mlx5_tx_mseg_memcpy(uint8_t *pdst,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int len,
- unsigned int must,
- unsigned int olx __rte_unused)
-{
- struct rte_mbuf *mbuf;
- unsigned int part, dlen, copy = 0;
- uint8_t *psrc;
-
- MLX5_ASSERT(len);
- MLX5_ASSERT(must <= len);
- do {
- /* Allow zero length packets, must check first. */
- dlen = rte_pktmbuf_data_len(loc->mbuf);
- if (dlen <= loc->mbuf_off) {
- /* Exhausted packet, just free. */
- mbuf = loc->mbuf;
- loc->mbuf = mbuf->next;
- rte_pktmbuf_free_seg(mbuf);
- loc->mbuf_off = 0;
- MLX5_ASSERT(loc->mbuf_nseg > 1);
- MLX5_ASSERT(loc->mbuf);
- --loc->mbuf_nseg;
- if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
- unsigned int diff;
-
- if (copy >= must) {
- /*
- * We already copied the minimal
- * requested amount of data.
- */
- return copy;
- }
- diff = must - copy;
- if (diff <= rte_pktmbuf_data_len(loc->mbuf)) {
- /*
- * Copy only the minimal required
- * part of the data buffer.
- */
- len = diff;
- }
- }
- continue;
- }
- dlen -= loc->mbuf_off;
- psrc = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
- loc->mbuf_off);
- part = RTE_MIN(len, dlen);
- rte_memcpy(pdst, psrc, part);
- copy += part;
- loc->mbuf_off += part;
- len -= part;
- if (!len) {
- if (loc->mbuf_off >= rte_pktmbuf_data_len(loc->mbuf)) {
- loc->mbuf_off = 0;
- /* Exhausted packet, just free. */
- mbuf = loc->mbuf;
- loc->mbuf = mbuf->next;
- rte_pktmbuf_free_seg(mbuf);
- loc->mbuf_off = 0;
- MLX5_ASSERT(loc->mbuf_nseg >= 1);
- --loc->mbuf_nseg;
- }
- return copy;
- }
- pdst += part;
- } while (true);
-}
-
-/**
- * Build the Ethernet Segment with inlined data from
- * multi-segment packet. Checks the boundary of WQEBB
- * and ring buffer wrapping, supports Software Parser,
- * Checksums and VLAN insertion Tx offload features.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet Segment.
- * @param vlan
- * Length of VLAN tag insertion if any.
- * @param inlen
- * Length of data to inline (VLAN included, if any).
- * @param tso
- * TSO flag, set mss field from the packet.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Pointer to the next Data Segment (aligned and
- * possible NOT wrapped around - caller should do
- * wrapping check on its own).
- */
-static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_eseg_mdat(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- struct mlx5_wqe *__rte_restrict wqe,
- unsigned int vlan,
- unsigned int inlen,
- unsigned int tso,
- unsigned int olx)
-{
- struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
- uint32_t csum;
- uint8_t *pdst;
- unsigned int part, tlen = 0;
-
- /*
- * Calculate and set check sum flags first, uint32_t field
- * in segment may be shared with Software Parser flags.
- */
- csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
- if (tso) {
- csum <<= 24;
- csum |= loc->mbuf->tso_segsz;
- es->flags = rte_cpu_to_be_32(csum);
- } else {
- es->flags = rte_cpu_to_le_32(csum);
- }
- /*
- * Calculate and set Software Parser offsets and flags.
- * These flags a set for custom UDP and IP tunnel packets.
- */
- es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
- /* Fill metadata field if needed. */
- es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
- MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
- pdst = (uint8_t *)&es->inline_data;
- if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
- /* Implement VLAN tag insertion as part inline data. */
- mlx5_tx_mseg_memcpy(pdst, loc,
- 2 * RTE_ETHER_ADDR_LEN,
- 2 * RTE_ETHER_ADDR_LEN, olx);
- pdst += 2 * RTE_ETHER_ADDR_LEN;
- *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
- ((RTE_ETHER_TYPE_VLAN << 16) |
- loc->mbuf->vlan_tci);
- pdst += sizeof(struct rte_vlan_hdr);
- tlen += 2 * RTE_ETHER_ADDR_LEN + sizeof(struct rte_vlan_hdr);
- }
- MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
- /*
- * The WQEBB space availability is checked by caller.
- * Here we should be aware of WQE ring buffer wraparound only.
- */
- part = (uint8_t *)txq->wqes_end - pdst;
- part = RTE_MIN(part, inlen - tlen);
- MLX5_ASSERT(part);
- do {
- unsigned int copy;
-
- /*
- * Copying may be interrupted inside the routine
- * if run into no inline hint flag.
- */
- copy = tlen >= txq->inlen_mode ? 0 : (txq->inlen_mode - tlen);
- copy = mlx5_tx_mseg_memcpy(pdst, loc, part, copy, olx);
- tlen += copy;
- if (likely(inlen <= tlen) || copy < part) {
- es->inline_hdr_sz = rte_cpu_to_be_16(tlen);
- pdst += copy;
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
- return (struct mlx5_wqe_dseg *)pdst;
- }
- pdst = (uint8_t *)txq->wqes;
- part = inlen - tlen;
- } while (true);
-}
-
-/**
- * Build the Data Segment of pointer type.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param dseg
- * Pointer to WQE to fill with built Data Segment.
- * @param buf
- * Data buffer to point.
- * @param len
- * Data buffer length.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_dseg_ptr(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- struct mlx5_wqe_dseg *__rte_restrict dseg,
- uint8_t *buf,
- unsigned int len,
- unsigned int olx __rte_unused)
-
-{
- MLX5_ASSERT(len);
- dseg->bcount = rte_cpu_to_be_32(len);
- dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
- dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
-}
-
-/**
- * Build the Data Segment of pointer type or inline
- * if data length is less than buffer in minimal
- * Data Segment size.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param dseg
- * Pointer to WQE to fill with built Data Segment.
- * @param buf
- * Data buffer to point.
- * @param len
- * Data buffer length.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_dseg_iptr(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- struct mlx5_wqe_dseg *__rte_restrict dseg,
- uint8_t *buf,
- unsigned int len,
- unsigned int olx __rte_unused)
-
-{
- uintptr_t dst, src;
-
- MLX5_ASSERT(len);
- if (len > MLX5_DSEG_MIN_INLINE_SIZE) {
- dseg->bcount = rte_cpu_to_be_32(len);
- dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
- dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
-
- return;
- }
- dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
- /* Unrolled implementation of generic rte_memcpy. */
- dst = (uintptr_t)&dseg->inline_data[0];
- src = (uintptr_t)buf;
- if (len & 0x08) {
-#ifdef RTE_ARCH_STRICT_ALIGN
- MLX5_ASSERT(dst == RTE_PTR_ALIGN(dst, sizeof(uint32_t)));
- *(uint32_t *)dst = *(unaligned_uint32_t *)src;
- dst += sizeof(uint32_t);
- src += sizeof(uint32_t);
- *(uint32_t *)dst = *(unaligned_uint32_t *)src;
- dst += sizeof(uint32_t);
- src += sizeof(uint32_t);
-#else
- *(uint64_t *)dst = *(unaligned_uint64_t *)src;
- dst += sizeof(uint64_t);
- src += sizeof(uint64_t);
-#endif
- }
- if (len & 0x04) {
- *(uint32_t *)dst = *(unaligned_uint32_t *)src;
- dst += sizeof(uint32_t);
- src += sizeof(uint32_t);
- }
- if (len & 0x02) {
- *(uint16_t *)dst = *(unaligned_uint16_t *)src;
- dst += sizeof(uint16_t);
- src += sizeof(uint16_t);
- }
- if (len & 0x01)
- *(uint8_t *)dst = *(uint8_t *)src;
-}
-
-/**
- * Build the Data Segment of inlined data from single
- * segment packet, no VLAN insertion.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param dseg
- * Pointer to WQE to fill with built Data Segment.
- * @param buf
- * Data buffer to point.
- * @param len
- * Data buffer length.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Pointer to the next Data Segment after inlined data.
- * Ring buffer wraparound check is needed. We do not
- * do it here because it may not be needed for the
- * last packet in the eMPW session.
- */
-static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_dseg_empw(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc __rte_unused,
- struct mlx5_wqe_dseg *__rte_restrict dseg,
- uint8_t *buf,
- unsigned int len,
- unsigned int olx __rte_unused)
-{
- unsigned int part;
- uint8_t *pdst;
-
- if (!MLX5_TXOFF_CONFIG(MPW)) {
- /* Store the descriptor byte counter for eMPW sessions. */
- dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
- pdst = &dseg->inline_data[0];
- } else {
- /* The entire legacy MPW session counter is stored on close. */
- pdst = (uint8_t *)dseg;
- }
- /*
- * The WQEBB space availability is checked by caller.
- * Here we should be aware of WQE ring buffer wraparound only.
- */
- part = (uint8_t *)txq->wqes_end - pdst;
- part = RTE_MIN(part, len);
- do {
- rte_memcpy(pdst, buf, part);
- len -= part;
- if (likely(!len)) {
- pdst += part;
- if (!MLX5_TXOFF_CONFIG(MPW))
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
- /* Note: no final wraparound check here. */
- return (struct mlx5_wqe_dseg *)pdst;
- }
- pdst = (uint8_t *)txq->wqes;
- buf += part;
- part = len;
- } while (true);
-}
-
-/**
- * Build the Data Segment of inlined data from single
- * segment packet with VLAN insertion.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param dseg
- * Pointer to the dseg fill with built Data Segment.
- * @param buf
- * Data buffer to point.
- * @param len
- * Data buffer length.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Pointer to the next Data Segment after inlined data.
- * Ring buffer wraparound check is needed.
- */
-static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_dseg_vlan(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc __rte_unused,
- struct mlx5_wqe_dseg *__rte_restrict dseg,
- uint8_t *buf,
- unsigned int len,
- unsigned int olx __rte_unused)
-
-{
- unsigned int part;
- uint8_t *pdst;
-
- MLX5_ASSERT(len > MLX5_ESEG_MIN_INLINE_SIZE);
- if (!MLX5_TXOFF_CONFIG(MPW)) {
- /* Store the descriptor byte counter for eMPW sessions. */
- dseg->bcount = rte_cpu_to_be_32
- ((len + sizeof(struct rte_vlan_hdr)) |
- MLX5_ETH_WQE_DATA_INLINE);
- pdst = &dseg->inline_data[0];
- } else {
- /* The entire legacy MPW session counter is stored on close. */
- pdst = (uint8_t *)dseg;
- }
- memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
- buf += MLX5_DSEG_MIN_INLINE_SIZE;
- pdst += MLX5_DSEG_MIN_INLINE_SIZE;
- len -= MLX5_DSEG_MIN_INLINE_SIZE;
- /* Insert VLAN ethertype + VLAN tag. Pointer is aligned. */
- MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
- if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
- pdst = (uint8_t *)txq->wqes;
- *(uint32_t *)pdst = rte_cpu_to_be_32((RTE_ETHER_TYPE_VLAN << 16) |
- loc->mbuf->vlan_tci);
- pdst += sizeof(struct rte_vlan_hdr);
- /*
- * The WQEBB space availability is checked by caller.
- * Here we should be aware of WQE ring buffer wraparound only.
- */
- part = (uint8_t *)txq->wqes_end - pdst;
- part = RTE_MIN(part, len);
- do {
- rte_memcpy(pdst, buf, part);
- len -= part;
- if (likely(!len)) {
- pdst += part;
- if (!MLX5_TXOFF_CONFIG(MPW))
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
- /* Note: no final wraparound check here. */
- return (struct mlx5_wqe_dseg *)pdst;
- }
- pdst = (uint8_t *)txq->wqes;
- buf += part;
- part = len;
- } while (true);
-}
-
-/**
- * Build the Ethernet Segment with optionally inlined data with
- * VLAN insertion and following Data Segments (if any) from
- * multi-segment packet. Used by ordinary send and TSO.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet/Data Segments.
- * @param vlan
- * Length of VLAN header to insert, 0 means no VLAN insertion.
- * @param inlen
- * Data length to inline. For TSO this parameter specifies
- * exact value, for ordinary send routine can be aligned by
- * caller to provide better WQE space saving and data buffer
- * start address alignment. This length includes VLAN header
- * being inserted.
- * @param tso
- * Zero means ordinary send, inlined data can be extended,
- * otherwise this is TSO, inlined data length is fixed.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Actual size of built WQE in segments.
- */
-static __rte_always_inline unsigned int
-mlx5_tx_mseg_build(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- struct mlx5_wqe *__rte_restrict wqe,
- unsigned int vlan,
- unsigned int inlen,
- unsigned int tso,
- unsigned int olx __rte_unused)
-{
- struct mlx5_wqe_dseg *__rte_restrict dseg;
- unsigned int ds;
-
- MLX5_ASSERT((rte_pktmbuf_pkt_len(loc->mbuf) + vlan) >= inlen);
- loc->mbuf_nseg = NB_SEGS(loc->mbuf);
- loc->mbuf_off = 0;
-
- dseg = mlx5_tx_eseg_mdat(txq, loc, wqe, vlan, inlen, tso, olx);
- if (!loc->mbuf_nseg)
- goto dseg_done;
- /*
- * There are still some mbuf remaining, not inlined.
- * The first mbuf may be partially inlined and we
- * must process the possible non-zero data offset.
- */
- if (loc->mbuf_off) {
- unsigned int dlen;
- uint8_t *dptr;
-
- /*
- * Exhausted packets must be dropped before.
- * Non-zero offset means there are some data
- * remained in the packet.
- */
- MLX5_ASSERT(loc->mbuf_off < rte_pktmbuf_data_len(loc->mbuf));
- MLX5_ASSERT(rte_pktmbuf_data_len(loc->mbuf));
- dptr = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
- loc->mbuf_off);
- dlen = rte_pktmbuf_data_len(loc->mbuf) - loc->mbuf_off;
- /*
- * Build the pointer/minimal data Data Segment.
- * Do ring buffer wrapping check in advance.
- */
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- mlx5_tx_dseg_iptr(txq, loc, dseg, dptr, dlen, olx);
- /* Store the mbuf to be freed on completion. */
- MLX5_ASSERT(loc->elts_free);
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- --loc->elts_free;
- ++dseg;
- if (--loc->mbuf_nseg == 0)
- goto dseg_done;
- loc->mbuf = loc->mbuf->next;
- loc->mbuf_off = 0;
- }
- do {
- if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
- struct rte_mbuf *mbuf;
-
- /* Zero length segment found, just skip. */
- mbuf = loc->mbuf;
- loc->mbuf = loc->mbuf->next;
- rte_pktmbuf_free_seg(mbuf);
- if (--loc->mbuf_nseg == 0)
- break;
- } else {
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- mlx5_tx_dseg_iptr
- (txq, loc, dseg,
- rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
- rte_pktmbuf_data_len(loc->mbuf), olx);
- MLX5_ASSERT(loc->elts_free);
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- --loc->elts_free;
- ++dseg;
- if (--loc->mbuf_nseg == 0)
- break;
- loc->mbuf = loc->mbuf->next;
- }
- } while (true);
-
-dseg_done:
- /* Calculate actual segments used from the dseg pointer. */
- if ((uintptr_t)wqe < (uintptr_t)dseg)
- ds = ((uintptr_t)dseg - (uintptr_t)wqe) / MLX5_WSEG_SIZE;
- else
- ds = (((uintptr_t)dseg - (uintptr_t)wqe) +
- txq->wqe_s * MLX5_WQE_SIZE) / MLX5_WSEG_SIZE;
- return ds;
-}
-
-/**
- * The routine checks timestamp flag in the current packet,
- * and push WAIT WQE into the queue if scheduling is required.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_SINGLE - continue processing with the packet.
- * MLX5_TXCMP_CODE_MULTI - the WAIT inserted, continue processing.
- * Local context variables partially updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_schedule_send(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- if (MLX5_TXOFF_CONFIG(TXPP) &&
- loc->mbuf->ol_flags & txq->ts_mask) {
- struct mlx5_wqe *wqe;
- uint64_t ts;
- int32_t wci;
-
- /*
- * Estimate the required space quickly and roughly.
- * We would like to ensure the packet can be pushed
- * to the queue and we won't get the orphan WAIT WQE.
- */
- if (loc->wqe_free <= MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE ||
- loc->elts_free < NB_SEGS(loc->mbuf))
- return MLX5_TXCMP_CODE_EXIT;
- /* Convert the timestamp into completion to wait. */
- ts = *RTE_MBUF_DYNFIELD(loc->mbuf, txq->ts_offset, uint64_t *);
- wci = mlx5_txpp_convert_tx_ts(txq->sh, ts);
- if (unlikely(wci < 0))
- return MLX5_TXCMP_CODE_SINGLE;
- /* Build the WAIT WQE with specified completion. */
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- mlx5_tx_cseg_init(txq, loc, wqe, 2, MLX5_OPCODE_WAIT, olx);
- mlx5_tx_wseg_init(txq, loc, wqe, wci, olx);
- ++txq->wqe_ci;
- --loc->wqe_free;
- return MLX5_TXCMP_CODE_MULTI;
- }
- return MLX5_TXCMP_CODE_SINGLE;
-}
-
-/**
- * Tx one packet function for multi-segment TSO. Supports all
- * types of Tx offloads, uses MLX5_OPCODE_TSO to build WQEs,
- * sends one packet per WQE.
- *
- * This routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * Local context variables partially updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_packet_multi_tso(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- struct mlx5_wqe *__rte_restrict wqe;
- unsigned int ds, dlen, inlen, ntcp, vlan = 0;
-
- if (MLX5_TXOFF_CONFIG(TXPP)) {
- enum mlx5_txcmp_code wret;
-
- /* Generate WAIT for scheduling if requested. */
- wret = mlx5_tx_schedule_send(txq, loc, olx);
- if (wret == MLX5_TXCMP_CODE_EXIT)
- return MLX5_TXCMP_CODE_EXIT;
- if (wret == MLX5_TXCMP_CODE_ERROR)
- return MLX5_TXCMP_CODE_ERROR;
- }
- /*
- * Calculate data length to be inlined to estimate
- * the required space in WQE ring buffer.
- */
- dlen = rte_pktmbuf_pkt_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
- vlan = sizeof(struct rte_vlan_hdr);
- inlen = loc->mbuf->l2_len + vlan +
- loc->mbuf->l3_len + loc->mbuf->l4_len;
- if (unlikely((!inlen || !loc->mbuf->tso_segsz)))
- return MLX5_TXCMP_CODE_ERROR;
- if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
- inlen += loc->mbuf->outer_l2_len + loc->mbuf->outer_l3_len;
- /* Packet must contain all TSO headers. */
- if (unlikely(inlen > MLX5_MAX_TSO_HEADER ||
- inlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
- inlen > (dlen + vlan)))
- return MLX5_TXCMP_CODE_ERROR;
- MLX5_ASSERT(inlen >= txq->inlen_mode);
- /*
- * Check whether there are enough free WQEBBs:
- * - Control Segment
- * - Ethernet Segment
- * - First Segment of inlined Ethernet data
- * - ... data continued ...
- * - Data Segments of pointer/min inline type
- */
- ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
- MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WSEG_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- /* Check for maximal WQE size. */
- if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_ERROR;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes/packets counters. */
- ntcp = (dlen - (inlen - vlan) + loc->mbuf->tso_segsz - 1) /
- loc->mbuf->tso_segsz;
- /*
- * One will be added for mbuf itself
- * at the end of the mlx5_tx_burst from
- * loc->pkts_sent field.
- */
- --ntcp;
- txq->stats.opackets += ntcp;
- txq->stats.obytes += dlen + vlan + ntcp * inlen;
-#endif
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_TSO, olx);
- ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 1, olx);
- wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- return MLX5_TXCMP_CODE_MULTI;
-}
-
-/**
- * Tx one packet function for multi-segment SEND. Supports all
- * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
- * sends one packet per WQE, without any data inlining in
- * Ethernet Segment.
- *
- * This routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * Local context variables partially updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_packet_multi_send(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- struct mlx5_wqe_dseg *__rte_restrict dseg;
- struct mlx5_wqe *__rte_restrict wqe;
- unsigned int ds, nseg;
-
- MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
- if (MLX5_TXOFF_CONFIG(TXPP)) {
- enum mlx5_txcmp_code wret;
-
- /* Generate WAIT for scheduling if requested. */
- wret = mlx5_tx_schedule_send(txq, loc, olx);
- if (wret == MLX5_TXCMP_CODE_EXIT)
- return MLX5_TXCMP_CODE_EXIT;
- if (wret == MLX5_TXCMP_CODE_ERROR)
- return MLX5_TXCMP_CODE_ERROR;
- }
- /*
- * No inline at all, it means the CPU cycles saving
- * is prioritized at configuration, we should not
- * copy any packet data to WQE.
- */
- nseg = NB_SEGS(loc->mbuf);
- ds = 2 + nseg;
- if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- /* Check for maximal WQE size. */
- if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_ERROR;
- /*
- * Some Tx offloads may cause an error if
- * packet is not long enough, check against
- * assumed minimal length.
- */
- if (rte_pktmbuf_pkt_len(loc->mbuf) <= MLX5_ESEG_MIN_INLINE_SIZE)
- return MLX5_TXCMP_CODE_ERROR;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += rte_pktmbuf_pkt_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
- txq->stats.obytes += sizeof(struct rte_vlan_hdr);
-#endif
- /*
- * SEND WQE, one WQEBB:
- * - Control Segment, SEND opcode
- * - Ethernet Segment, optional VLAN, no inline
- * - Data Segments, pointer only type
- */
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, ds, MLX5_OPCODE_SEND, olx);
- mlx5_tx_eseg_none(txq, loc, wqe, olx);
- dseg = &wqe->dseg[0];
- do {
- if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
- struct rte_mbuf *mbuf;
-
- /*
- * Zero length segment found, have to
- * correct total size of WQE in segments.
- * It is supposed to be rare occasion, so
- * in normal case (no zero length segments)
- * we avoid extra writing to the Control
- * Segment.
- */
- --ds;
- wqe->cseg.sq_ds -= RTE_BE32(1);
- mbuf = loc->mbuf;
- loc->mbuf = mbuf->next;
- rte_pktmbuf_free_seg(mbuf);
- if (--nseg == 0)
- break;
- } else {
- mlx5_tx_dseg_ptr
- (txq, loc, dseg,
- rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
- rte_pktmbuf_data_len(loc->mbuf), olx);
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- --loc->elts_free;
- if (--nseg == 0)
- break;
- ++dseg;
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- loc->mbuf = loc->mbuf->next;
- }
- } while (true);
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- return MLX5_TXCMP_CODE_MULTI;
-}
-
-/**
- * Tx one packet function for multi-segment SEND. Supports all
- * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
- * sends one packet per WQE, with data inlining in
- * Ethernet Segment and minimal Data Segments.
- *
- * This routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * Local context variables partially updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_packet_multi_inline(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- struct mlx5_wqe *__rte_restrict wqe;
- unsigned int ds, inlen, dlen, vlan = 0;
-
- MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
- MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
- if (MLX5_TXOFF_CONFIG(TXPP)) {
- enum mlx5_txcmp_code wret;
-
- /* Generate WAIT for scheduling if requested. */
- wret = mlx5_tx_schedule_send(txq, loc, olx);
- if (wret == MLX5_TXCMP_CODE_EXIT)
- return MLX5_TXCMP_CODE_EXIT;
- if (wret == MLX5_TXCMP_CODE_ERROR)
- return MLX5_TXCMP_CODE_ERROR;
- }
- /*
- * First calculate data length to be inlined
- * to estimate the required space for WQE.
- */
- dlen = rte_pktmbuf_pkt_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
- vlan = sizeof(struct rte_vlan_hdr);
- inlen = dlen + vlan;
- /* Check against minimal length. */
- if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
- return MLX5_TXCMP_CODE_ERROR;
- MLX5_ASSERT(txq->inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
- if (inlen > txq->inlen_send ||
- loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
- struct rte_mbuf *mbuf;
- unsigned int nxlen;
- uintptr_t start;
-
- /*
- * Packet length exceeds the allowed inline
- * data length, check whether the minimal
- * inlining is required.
- */
- if (txq->inlen_mode) {
- MLX5_ASSERT(txq->inlen_mode >=
- MLX5_ESEG_MIN_INLINE_SIZE);
- MLX5_ASSERT(txq->inlen_mode <= txq->inlen_send);
- inlen = txq->inlen_mode;
- } else {
- if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE ||
- !vlan || txq->vlan_en) {
- /*
- * VLAN insertion will be done inside by HW.
- * It is not utmost effective - VLAN flag is
- * checked twice, but we should proceed the
- * inlining length correctly and take into
- * account the VLAN header being inserted.
- */
- return mlx5_tx_packet_multi_send
- (txq, loc, olx);
- }
- inlen = MLX5_ESEG_MIN_INLINE_SIZE;
- }
- /*
- * Now we know the minimal amount of data is requested
- * to inline. Check whether we should inline the buffers
- * from the chain beginning to eliminate some mbufs.
- */
- mbuf = loc->mbuf;
- nxlen = rte_pktmbuf_data_len(mbuf);
- if (unlikely(nxlen <= txq->inlen_send)) {
- /* We can inline first mbuf at least. */
- if (nxlen < inlen) {
- unsigned int smlen;
-
- /* Scan mbufs till inlen filled. */
- do {
- smlen = nxlen;
- mbuf = NEXT(mbuf);
- MLX5_ASSERT(mbuf);
- nxlen = rte_pktmbuf_data_len(mbuf);
- nxlen += smlen;
- } while (unlikely(nxlen < inlen));
- if (unlikely(nxlen > txq->inlen_send)) {
- /* We cannot inline entire mbuf. */
- smlen = inlen - smlen;
- start = rte_pktmbuf_mtod_offset
- (mbuf, uintptr_t, smlen);
- goto do_align;
- }
- }
- do {
- inlen = nxlen;
- mbuf = NEXT(mbuf);
- /* There should be not end of packet. */
- MLX5_ASSERT(mbuf);
- nxlen = inlen + rte_pktmbuf_data_len(mbuf);
- } while (unlikely(nxlen < txq->inlen_send));
- }
- start = rte_pktmbuf_mtod(mbuf, uintptr_t);
- /*
- * Check whether we can do inline to align start
- * address of data buffer to cacheline.
- */
-do_align:
- start = (~start + 1) & (RTE_CACHE_LINE_SIZE - 1);
- if (unlikely(start)) {
- start += inlen;
- if (start <= txq->inlen_send)
- inlen = start;
- }
- }
- /*
- * Check whether there are enough free WQEBBs:
- * - Control Segment
- * - Ethernet Segment
- * - First Segment of inlined Ethernet data
- * - ... data continued ...
- * - Data Segments of pointer/min inline type
- *
- * Estimate the number of Data Segments conservatively,
- * supposing no any mbufs is being freed during inlining.
- */
- MLX5_ASSERT(inlen <= txq->inlen_send);
- ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
- MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WSEG_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- /* Check for maximal WQE size. */
- if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_ERROR;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes/packets counters. */
- txq->stats.obytes += dlen + vlan;
-#endif
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_SEND, olx);
- ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 0, olx);
- wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- return MLX5_TXCMP_CODE_MULTI;
-}
-
-/**
- * Tx burst function for multi-segment packets. Supports all
- * types of Tx offloads, uses MLX5_OPCODE_SEND/TSO to build WQEs,
- * sends one packet per WQE. Function stops sending if it
- * encounters the single-segment packet.
- *
- * This routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
- * MLX5_TXCMP_CODE_TSO - TSO single-segment packet encountered.
- * Local context variables updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_mseg(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- MLX5_ASSERT(loc->elts_free && loc->wqe_free);
- MLX5_ASSERT(pkts_n > loc->pkts_sent);
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- enum mlx5_txcmp_code ret;
-
- MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
- /*
- * Estimate the number of free elts quickly but
- * conservatively. Some segment may be fully inlined
- * and freed, ignore this here - precise estimation
- * is costly.
- */
- if (loc->elts_free < NB_SEGS(loc->mbuf))
- return MLX5_TXCMP_CODE_EXIT;
- if (MLX5_TXOFF_CONFIG(TSO) &&
- unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)) {
- /* Proceed with multi-segment TSO. */
- ret = mlx5_tx_packet_multi_tso(txq, loc, olx);
- } else if (MLX5_TXOFF_CONFIG(INLINE)) {
- /* Proceed with multi-segment SEND with inlining. */
- ret = mlx5_tx_packet_multi_inline(txq, loc, olx);
- } else {
- /* Proceed with multi-segment SEND w/o inlining. */
- ret = mlx5_tx_packet_multi_send(txq, loc, olx);
- }
- if (ret == MLX5_TXCMP_CODE_EXIT)
- return MLX5_TXCMP_CODE_EXIT;
- if (ret == MLX5_TXCMP_CODE_ERROR)
- return MLX5_TXCMP_CODE_ERROR;
- /* WQE is built, go to the next packet. */
- ++loc->pkts_sent;
- --pkts_n;
- if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- loc->mbuf = *pkts++;
- if (pkts_n > 1)
- rte_prefetch0(*pkts);
- if (likely(NB_SEGS(loc->mbuf) > 1))
- continue;
- /* Here ends the series of multi-segment packets. */
- if (MLX5_TXOFF_CONFIG(TSO) &&
- unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
- return MLX5_TXCMP_CODE_TSO;
- return MLX5_TXCMP_CODE_SINGLE;
- }
- MLX5_ASSERT(false);
-}
-
-/**
- * Tx burst function for single-segment packets with TSO.
- * Supports all types of Tx offloads, except multi-packets.
- * Uses MLX5_OPCODE_TSO to build WQEs, sends one packet per WQE.
- * Function stops sending if it encounters the multi-segment
- * packet or packet without TSO requested.
- *
- * The routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head if inline
- * offloads is requested due to possible early freeing
- * of the inlined mbufs (can not store pkts array in elts
- * as a batch).
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
- * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
- * Local context variables updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_tso(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- MLX5_ASSERT(loc->elts_free && loc->wqe_free);
- MLX5_ASSERT(pkts_n > loc->pkts_sent);
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- struct mlx5_wqe_dseg *__rte_restrict dseg;
- struct mlx5_wqe *__rte_restrict wqe;
- unsigned int ds, dlen, hlen, ntcp, vlan = 0;
- uint8_t *dptr;
-
- MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
- if (MLX5_TXOFF_CONFIG(TXPP)) {
- enum mlx5_txcmp_code wret;
-
- /* Generate WAIT for scheduling if requested. */
- wret = mlx5_tx_schedule_send(txq, loc, olx);
- if (wret == MLX5_TXCMP_CODE_EXIT)
- return MLX5_TXCMP_CODE_EXIT;
- if (wret == MLX5_TXCMP_CODE_ERROR)
- return MLX5_TXCMP_CODE_ERROR;
- }
- dlen = rte_pktmbuf_data_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
- vlan = sizeof(struct rte_vlan_hdr);
- }
- /*
- * First calculate the WQE size to check
- * whether we have enough space in ring buffer.
- */
- hlen = loc->mbuf->l2_len + vlan +
- loc->mbuf->l3_len + loc->mbuf->l4_len;
- if (unlikely((!hlen || !loc->mbuf->tso_segsz)))
- return MLX5_TXCMP_CODE_ERROR;
- if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
- hlen += loc->mbuf->outer_l2_len +
- loc->mbuf->outer_l3_len;
- /* Segment must contain all TSO headers. */
- if (unlikely(hlen > MLX5_MAX_TSO_HEADER ||
- hlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
- hlen > (dlen + vlan)))
- return MLX5_TXCMP_CODE_ERROR;
- /*
- * Check whether there are enough free WQEBBs:
- * - Control Segment
- * - Ethernet Segment
- * - First Segment of inlined Ethernet data
- * - ... data continued ...
- * - Finishing Data Segment of pointer type
- */
- ds = 4 + (hlen - MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- if (loc->wqe_free < ((ds + 3) / 4))
- return MLX5_TXCMP_CODE_EXIT;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes/packets counters. */
- ntcp = (dlen + vlan - hlen +
- loc->mbuf->tso_segsz - 1) /
- loc->mbuf->tso_segsz;
- /*
- * One will be added for mbuf itself at the end
- * of the mlx5_tx_burst from loc->pkts_sent field.
- */
- --ntcp;
- txq->stats.opackets += ntcp;
- txq->stats.obytes += dlen + vlan + ntcp * hlen;
-#endif
- /*
- * Build the TSO WQE:
- * - Control Segment
- * - Ethernet Segment with hlen bytes inlined
- * - Data Segment of pointer type
- */
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, ds,
- MLX5_OPCODE_TSO, olx);
- dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan, hlen, 1, olx);
- dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) + hlen - vlan;
- dlen -= hlen - vlan;
- mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
- /*
- * WQE is built, update the loop parameters
- * and go to the next packet.
- */
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- if (MLX5_TXOFF_CONFIG(INLINE))
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- --loc->elts_free;
- ++loc->pkts_sent;
- --pkts_n;
- if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- loc->mbuf = *pkts++;
- if (pkts_n > 1)
- rte_prefetch0(*pkts);
- if (MLX5_TXOFF_CONFIG(MULTI) &&
- unlikely(NB_SEGS(loc->mbuf) > 1))
- return MLX5_TXCMP_CODE_MULTI;
- if (likely(!(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)))
- return MLX5_TXCMP_CODE_SINGLE;
- /* Continue with the next TSO packet. */
- }
- MLX5_ASSERT(false);
-}
-
-/**
- * Analyze the packet and select the best method to send.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- * @param newp
- * The predefined flag whether do complete check for
- * multi-segment packets and TSO.
- *
- * @return
- * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
- * MLX5_TXCMP_CODE_TSO - TSO required, use TSO/LSO.
- * MLX5_TXCMP_CODE_SINGLE - single-segment packet, use SEND.
- * MLX5_TXCMP_CODE_EMPW - single-segment packet, use MPW.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_able_to_empw(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx,
- bool newp)
-{
- /* Check for multi-segment packet. */
- if (newp &&
- MLX5_TXOFF_CONFIG(MULTI) &&
- unlikely(NB_SEGS(loc->mbuf) > 1))
- return MLX5_TXCMP_CODE_MULTI;
- /* Check for TSO packet. */
- if (newp &&
- MLX5_TXOFF_CONFIG(TSO) &&
- unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
- return MLX5_TXCMP_CODE_TSO;
- /* Check if eMPW is enabled at all. */
- if (!MLX5_TXOFF_CONFIG(EMPW))
- return MLX5_TXCMP_CODE_SINGLE;
- /* Check if eMPW can be engaged. */
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- unlikely(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) &&
- (!MLX5_TXOFF_CONFIG(INLINE) ||
- unlikely((rte_pktmbuf_data_len(loc->mbuf) +
- sizeof(struct rte_vlan_hdr)) > txq->inlen_empw))) {
- /*
- * eMPW does not support VLAN insertion offload,
- * we have to inline the entire packet but
- * packet is too long for inlining.
- */
- return MLX5_TXCMP_CODE_SINGLE;
- }
- return MLX5_TXCMP_CODE_EMPW;
-}
-
-/**
- * Check the next packet attributes to match with the eMPW batch ones.
- * In addition, for legacy MPW the packet length is checked either.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param es
- * Pointer to Ethernet Segment of eMPW batch.
- * @param loc
- * Pointer to burst routine local context.
- * @param dlen
- * Length of previous packet in MPW descriptor.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * true - packet match with eMPW batch attributes.
- * false - no match, eMPW should be restarted.
- */
-static __rte_always_inline bool
-mlx5_tx_match_empw(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_wqe_eseg *__rte_restrict es,
- struct mlx5_txq_local *__rte_restrict loc,
- uint32_t dlen,
- unsigned int olx)
-{
- uint8_t swp_flags = 0;
-
- /* Compare the checksum flags, if any. */
- if (MLX5_TXOFF_CONFIG(CSUM) &&
- txq_ol_cksum_to_cs(loc->mbuf) != es->cs_flags)
- return false;
- /* Compare the Software Parser offsets and flags. */
- if (MLX5_TXOFF_CONFIG(SWP) &&
- (es->swp_offs != txq_mbuf_to_swp(loc, &swp_flags, olx) ||
- es->swp_flags != swp_flags))
- return false;
- /* Fill metadata field if needed. */
- if (MLX5_TXOFF_CONFIG(METADATA) &&
- es->metadata != (loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0))
- return false;
- /* Legacy MPW can send packets with the same lengt only. */
- if (MLX5_TXOFF_CONFIG(MPW) &&
- dlen != rte_pktmbuf_data_len(loc->mbuf))
- return false;
- /* There must be no VLAN packets in eMPW loop. */
- if (MLX5_TXOFF_CONFIG(VLAN))
- MLX5_ASSERT(!(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT));
- /* Check if the scheduling is requested. */
- if (MLX5_TXOFF_CONFIG(TXPP) &&
- loc->mbuf->ol_flags & txq->ts_mask)
- return false;
- return true;
-}
-
-/*
- * Update send loop variables and WQE for eMPW loop
- * without data inlining. Number of Data Segments is
- * equal to the number of sent packets.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param ds
- * Number of packets/Data Segments/Packets.
- * @param slen
- * Accumulated statistics, bytes sent
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * true - packet match with eMPW batch attributes.
- * false - no match, eMPW should be restarted.
- */
-static __rte_always_inline void
-mlx5_tx_sdone_empw(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int ds,
- unsigned int slen,
- unsigned int olx __rte_unused)
-{
- MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += slen;
-#else
- (void)slen;
-#endif
- loc->elts_free -= ds;
- loc->pkts_sent += ds;
- ds += 2;
- loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
-}
-
-/*
- * Update send loop variables and WQE for eMPW loop
- * with data inlining. Gets the size of pushed descriptors
- * and data to the WQE.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param len
- * Total size of descriptor/data in bytes.
- * @param slen
- * Accumulated statistics, data bytes sent.
- * @param wqem
- * The base WQE for the eMPW/MPW descriptor.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * true - packet match with eMPW batch attributes.
- * false - no match, eMPW should be restarted.
- */
-static __rte_always_inline void
-mlx5_tx_idone_empw(struct mlx5_txq_data *__rte_restrict txq,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int len,
- unsigned int slen,
- struct mlx5_wqe *__rte_restrict wqem,
- unsigned int olx __rte_unused)
-{
- struct mlx5_wqe_dseg *dseg = &wqem->dseg[0];
-
- MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += slen;
-#else
- (void)slen;
-#endif
- if (MLX5_TXOFF_CONFIG(MPW) && dseg->bcount == RTE_BE32(0)) {
- /*
- * If the legacy MPW session contains the inline packets
- * we should set the only inline data segment length
- * and align the total length to the segment size.
- */
- MLX5_ASSERT(len > sizeof(dseg->bcount));
- dseg->bcount = rte_cpu_to_be_32((len - sizeof(dseg->bcount)) |
- MLX5_ETH_WQE_DATA_INLINE);
- len = (len + MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE + 2;
- } else {
- /*
- * The session is not legacy MPW or contains the
- * data buffer pointer segments.
- */
- MLX5_ASSERT((len % MLX5_WSEG_SIZE) == 0);
- len = len / MLX5_WSEG_SIZE + 2;
- }
- wqem->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
- txq->wqe_ci += (len + 3) / 4;
- loc->wqe_free -= (len + 3) / 4;
- loc->wqe_last = wqem;
-}
-
-/**
- * The set of Tx burst functions for single-segment packets
- * without TSO and with Multi-Packet Writing feature support.
- * Supports all types of Tx offloads, except multi-packets
- * and TSO.
- *
- * Uses MLX5_OPCODE_EMPW to build WQEs if possible and sends
- * as many packet per WQE as it can. If eMPW is not configured
- * or packet can not be sent with eMPW (VLAN insertion) the
- * ordinary SEND opcode is used and only one packet placed
- * in WQE.
- *
- * Functions stop sending if it encounters the multi-segment
- * packet or packet with TSO requested.
- *
- * The routines are responsible for storing processed mbuf
- * into elts ring buffer and update elts_head if inlining
- * offload is requested. Otherwise the copying mbufs to elts
- * can be postponed and completed at the end of burst routine.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
- * MLX5_TXCMP_CODE_TSO - TSO packet encountered.
- * MLX5_TXCMP_CODE_SINGLE - used inside functions set.
- * MLX5_TXCMP_CODE_EMPW - used inside functions set.
- *
- * Local context variables updated.
- *
- *
- * The routine sends packets with MLX5_OPCODE_EMPW
- * without inlining, this is dedicated optimized branch.
- * No VLAN insertion is supported.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_empw_simple(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- /*
- * Subroutine is the part of mlx5_tx_burst_single()
- * and sends single-segment packet with eMPW opcode
- * without data inlining.
- */
- MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
- MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
- MLX5_ASSERT(loc->elts_free && loc->wqe_free);
- MLX5_ASSERT(pkts_n > loc->pkts_sent);
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- struct mlx5_wqe_dseg *__rte_restrict dseg;
- struct mlx5_wqe_eseg *__rte_restrict eseg;
- enum mlx5_txcmp_code ret;
- unsigned int part, loop;
- unsigned int slen = 0;
-
-next_empw:
- MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
- if (MLX5_TXOFF_CONFIG(TXPP)) {
- enum mlx5_txcmp_code wret;
-
- /* Generate WAIT for scheduling if requested. */
- wret = mlx5_tx_schedule_send(txq, loc, olx);
- if (wret == MLX5_TXCMP_CODE_EXIT)
- return MLX5_TXCMP_CODE_EXIT;
- if (wret == MLX5_TXCMP_CODE_ERROR)
- return MLX5_TXCMP_CODE_ERROR;
- }
- part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
- MLX5_MPW_MAX_PACKETS :
- MLX5_EMPW_MAX_PACKETS);
- if (unlikely(loc->elts_free < part)) {
- /* We have no enough elts to save all mbufs. */
- if (unlikely(loc->elts_free < MLX5_EMPW_MIN_PACKETS))
- return MLX5_TXCMP_CODE_EXIT;
- /* But we still able to send at least minimal eMPW. */
- part = loc->elts_free;
- }
- /* Check whether we have enough WQEs */
- if (unlikely(loc->wqe_free < ((2 + part + 3) / 4))) {
- if (unlikely(loc->wqe_free <
- ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- part = (loc->wqe_free * 4) - 2;
- }
- if (likely(part > 1))
- rte_prefetch0(*pkts);
- loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- /*
- * Build eMPW title WQEBB:
- * - Control Segment, eMPW opcode
- * - Ethernet Segment, no inline
- */
- mlx5_tx_cseg_init(txq, loc, loc->wqe_last, part + 2,
- MLX5_OPCODE_ENHANCED_MPSW, olx);
- mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
- olx & ~MLX5_TXOFF_CONFIG_VLAN);
- eseg = &loc->wqe_last->eseg;
- dseg = &loc->wqe_last->dseg[0];
- loop = part;
- /* Store the packet length for legacy MPW. */
- if (MLX5_TXOFF_CONFIG(MPW))
- eseg->mss = rte_cpu_to_be_16
- (rte_pktmbuf_data_len(loc->mbuf));
- for (;;) {
- uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- slen += dlen;
-#endif
- mlx5_tx_dseg_ptr
- (txq, loc, dseg,
- rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
- dlen, olx);
- if (unlikely(--loop == 0))
- break;
- loc->mbuf = *pkts++;
- if (likely(loop > 1))
- rte_prefetch0(*pkts);
- ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
- /*
- * Unroll the completion code to avoid
- * returning variable value - it results in
- * unoptimized sequent checking in caller.
- */
- if (ret == MLX5_TXCMP_CODE_MULTI) {
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_MULTI;
- }
- MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
- if (ret == MLX5_TXCMP_CODE_TSO) {
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_TSO;
- }
- if (ret == MLX5_TXCMP_CODE_SINGLE) {
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_SINGLE;
- }
- if (ret != MLX5_TXCMP_CODE_EMPW) {
- MLX5_ASSERT(false);
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- return MLX5_TXCMP_CODE_ERROR;
- }
- /*
- * Check whether packet parameters coincide
- * within assumed eMPW batch:
- * - check sum settings
- * - metadata value
- * - software parser settings
- * - packets length (legacy MPW only)
- * - scheduling is not required
- */
- if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
- MLX5_ASSERT(loop);
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- pkts_n -= part;
- goto next_empw;
- }
- /* Packet attributes match, continue the same eMPW. */
- ++dseg;
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- }
- /* eMPW is built successfully, update loop parameters. */
- MLX5_ASSERT(!loop);
- MLX5_ASSERT(pkts_n >= part);
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += slen;
-#endif
- loc->elts_free -= part;
- loc->pkts_sent += part;
- txq->wqe_ci += (2 + part + 3) / 4;
- loc->wqe_free -= (2 + part + 3) / 4;
- pkts_n -= part;
- if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- loc->mbuf = *pkts++;
- ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
- if (unlikely(ret != MLX5_TXCMP_CODE_EMPW))
- return ret;
- /* Continue sending eMPW batches. */
- }
- MLX5_ASSERT(false);
-}
-
-/**
- * The routine sends packets with MLX5_OPCODE_EMPW
- * with inlining, optionally supports VLAN insertion.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_empw_inline(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- /*
- * Subroutine is the part of mlx5_tx_burst_single()
- * and sends single-segment packet with eMPW opcode
- * with data inlining.
- */
- MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
- MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
- MLX5_ASSERT(loc->elts_free && loc->wqe_free);
- MLX5_ASSERT(pkts_n > loc->pkts_sent);
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- struct mlx5_wqe_dseg *__rte_restrict dseg;
- struct mlx5_wqe *__rte_restrict wqem;
- enum mlx5_txcmp_code ret;
- unsigned int room, part, nlim;
- unsigned int slen = 0;
-
- MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
- if (MLX5_TXOFF_CONFIG(TXPP)) {
- enum mlx5_txcmp_code wret;
-
- /* Generate WAIT for scheduling if requested. */
- wret = mlx5_tx_schedule_send(txq, loc, olx);
- if (wret == MLX5_TXCMP_CODE_EXIT)
- return MLX5_TXCMP_CODE_EXIT;
- if (wret == MLX5_TXCMP_CODE_ERROR)
- return MLX5_TXCMP_CODE_ERROR;
- }
- /*
- * Limits the amount of packets in one WQE
- * to improve CQE latency generation.
- */
- nlim = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
- MLX5_MPW_INLINE_MAX_PACKETS :
- MLX5_EMPW_MAX_PACKETS);
- /* Check whether we have minimal amount WQEs */
- if (unlikely(loc->wqe_free <
- ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- if (likely(pkts_n > 1))
- rte_prefetch0(*pkts);
- wqem = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- /*
- * Build eMPW title WQEBB:
- * - Control Segment, eMPW opcode, zero DS
- * - Ethernet Segment, no inline
- */
- mlx5_tx_cseg_init(txq, loc, wqem, 0,
- MLX5_OPCODE_ENHANCED_MPSW, olx);
- mlx5_tx_eseg_none(txq, loc, wqem,
- olx & ~MLX5_TXOFF_CONFIG_VLAN);
- dseg = &wqem->dseg[0];
- /* Store the packet length for legacy MPW. */
- if (MLX5_TXOFF_CONFIG(MPW))
- wqem->eseg.mss = rte_cpu_to_be_16
- (rte_pktmbuf_data_len(loc->mbuf));
- room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
- loc->wqe_free) * MLX5_WQE_SIZE -
- MLX5_WQE_CSEG_SIZE -
- MLX5_WQE_ESEG_SIZE;
- /* Limit the room for legacy MPW sessions for performance. */
- if (MLX5_TXOFF_CONFIG(MPW))
- room = RTE_MIN(room,
- RTE_MAX(txq->inlen_empw +
- sizeof(dseg->bcount) +
- (MLX5_TXOFF_CONFIG(VLAN) ?
- sizeof(struct rte_vlan_hdr) : 0),
- MLX5_MPW_INLINE_MAX_PACKETS *
- MLX5_WQE_DSEG_SIZE));
- /* Build WQE till we have space, packets and resources. */
- part = room;
- for (;;) {
- uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
- uint8_t *dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
- unsigned int tlen;
-
- MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
- MLX5_ASSERT((room % MLX5_WQE_DSEG_SIZE) == 0);
- MLX5_ASSERT((uintptr_t)dseg < (uintptr_t)txq->wqes_end);
- /*
- * Some Tx offloads may cause an error if
- * packet is not long enough, check against
- * assumed minimal length.
- */
- if (unlikely(dlen <= MLX5_ESEG_MIN_INLINE_SIZE)) {
- part -= room;
- if (unlikely(!part))
- return MLX5_TXCMP_CODE_ERROR;
- /*
- * We have some successfully built
- * packet Data Segments to send.
- */
- mlx5_tx_idone_empw(txq, loc, part,
- slen, wqem, olx);
- return MLX5_TXCMP_CODE_ERROR;
- }
- /* Inline or not inline - that's the Question. */
- if (dlen > txq->inlen_empw ||
- loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE)
- goto pointer_empw;
- if (MLX5_TXOFF_CONFIG(MPW)) {
- if (dlen > txq->inlen_send)
- goto pointer_empw;
- tlen = dlen;
- if (part == room) {
- /* Open new inline MPW session. */
- tlen += sizeof(dseg->bcount);
- dseg->bcount = RTE_BE32(0);
- dseg = RTE_PTR_ADD
- (dseg, sizeof(dseg->bcount));
- } else {
- /*
- * No pointer and inline descriptor
- * intermix for legacy MPW sessions.
- */
- if (wqem->dseg[0].bcount)
- break;
- }
- } else {
- tlen = sizeof(dseg->bcount) + dlen;
- }
- /* Inline entire packet, optional VLAN insertion. */
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
- /*
- * The packet length must be checked in
- * mlx5_tx_able_to_empw() and packet
- * fits into inline length guaranteed.
- */
- MLX5_ASSERT((dlen +
- sizeof(struct rte_vlan_hdr)) <=
- txq->inlen_empw);
- tlen += sizeof(struct rte_vlan_hdr);
- if (room < tlen)
- break;
- dseg = mlx5_tx_dseg_vlan(txq, loc, dseg,
- dptr, dlen, olx);
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- slen += sizeof(struct rte_vlan_hdr);
-#endif
- } else {
- if (room < tlen)
- break;
- dseg = mlx5_tx_dseg_empw(txq, loc, dseg,
- dptr, dlen, olx);
- }
- if (!MLX5_TXOFF_CONFIG(MPW))
- tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
- MLX5_ASSERT(room >= tlen);
- room -= tlen;
- /*
- * Packet data are completely inline,
- * we can try to free the packet.
- */
- if (likely(loc->pkts_sent == loc->mbuf_free)) {
- /*
- * All the packets from the burst beginning
- * are inline, we can free mbufs directly
- * from the origin array on tx_burst exit().
- */
- loc->mbuf_free++;
- goto next_mbuf;
- }
- /*
- * In order no to call rte_pktmbuf_free_seg() here,
- * in the most inner loop (that might be very
- * expensive) we just save the mbuf in elts.
- */
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- loc->elts_free--;
- goto next_mbuf;
-pointer_empw:
- /*
- * No pointer and inline descriptor
- * intermix for legacy MPW sessions.
- */
- if (MLX5_TXOFF_CONFIG(MPW) &&
- part != room &&
- wqem->dseg[0].bcount == RTE_BE32(0))
- break;
- /*
- * Not inlinable VLAN packets are
- * proceeded outside of this routine.
- */
- MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
- if (MLX5_TXOFF_CONFIG(VLAN))
- MLX5_ASSERT(!(loc->mbuf->ol_flags &
- PKT_TX_VLAN_PKT));
- mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
- /* We have to store mbuf in elts.*/
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- loc->elts_free--;
- room -= MLX5_WQE_DSEG_SIZE;
- /* Ring buffer wraparound is checked at the loop end.*/
- ++dseg;
-next_mbuf:
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- slen += dlen;
-#endif
- loc->pkts_sent++;
- pkts_n--;
- if (unlikely(!pkts_n || !loc->elts_free)) {
- /*
- * We have no resources/packets to
- * continue build descriptors.
- */
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part,
- slen, wqem, olx);
- return MLX5_TXCMP_CODE_EXIT;
- }
- loc->mbuf = *pkts++;
- if (likely(pkts_n > 1))
- rte_prefetch0(*pkts);
- ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
- /*
- * Unroll the completion code to avoid
- * returning variable value - it results in
- * unoptimized sequent checking in caller.
- */
- if (ret == MLX5_TXCMP_CODE_MULTI) {
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part,
- slen, wqem, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_MULTI;
- }
- MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
- if (ret == MLX5_TXCMP_CODE_TSO) {
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part,
- slen, wqem, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_TSO;
- }
- if (ret == MLX5_TXCMP_CODE_SINGLE) {
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part,
- slen, wqem, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_SINGLE;
- }
- if (ret != MLX5_TXCMP_CODE_EMPW) {
- MLX5_ASSERT(false);
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part,
- slen, wqem, olx);
- return MLX5_TXCMP_CODE_ERROR;
- }
- /* Check if we have minimal room left. */
- nlim--;
- if (unlikely(!nlim || room < MLX5_WQE_DSEG_SIZE))
- break;
- /*
- * Check whether packet parameters coincide
- * within assumed eMPW batch:
- * - check sum settings
- * - metadata value
- * - software parser settings
- * - packets length (legacy MPW only)
- * - scheduling is not required
- */
- if (!mlx5_tx_match_empw(txq, &wqem->eseg,
- loc, dlen, olx))
- break;
- /* Packet attributes match, continue the same eMPW. */
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- }
- /*
- * We get here to close an existing eMPW
- * session and start the new one.
- */
- MLX5_ASSERT(pkts_n);
- part -= room;
- if (unlikely(!part))
- return MLX5_TXCMP_CODE_EXIT;
- mlx5_tx_idone_empw(txq, loc, part, slen, wqem, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- /* Continue the loop with new eMPW session. */
- }
- MLX5_ASSERT(false);
-}
-
-/**
- * The routine sends packets with ordinary MLX5_OPCODE_SEND.
- * Data inlining and VLAN insertion are supported.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_single_send(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- /*
- * Subroutine is the part of mlx5_tx_burst_single()
- * and sends single-segment packet with SEND opcode.
- */
- MLX5_ASSERT(loc->elts_free && loc->wqe_free);
- MLX5_ASSERT(pkts_n > loc->pkts_sent);
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- struct mlx5_wqe *__rte_restrict wqe;
- enum mlx5_txcmp_code ret;
-
- MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
- if (MLX5_TXOFF_CONFIG(TXPP)) {
- enum mlx5_txcmp_code wret;
-
- /* Generate WAIT for scheduling if requested. */
- wret = mlx5_tx_schedule_send(txq, loc, olx);
- if (wret == MLX5_TXCMP_CODE_EXIT)
- return MLX5_TXCMP_CODE_EXIT;
- if (wret == MLX5_TXCMP_CODE_ERROR)
- return MLX5_TXCMP_CODE_ERROR;
- }
- if (MLX5_TXOFF_CONFIG(INLINE)) {
- unsigned int inlen, vlan = 0;
-
- inlen = rte_pktmbuf_data_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
- vlan = sizeof(struct rte_vlan_hdr);
- inlen += vlan;
- }
- /*
- * If inlining is enabled at configuration time
- * the limit must be not less than minimal size.
- * Otherwise we would do extra check for data
- * size to avoid crashes due to length overflow.
- */
- MLX5_ASSERT(txq->inlen_send >=
- MLX5_ESEG_MIN_INLINE_SIZE);
- if (inlen <= txq->inlen_send) {
- unsigned int seg_n, wqe_n;
-
- rte_prefetch0(rte_pktmbuf_mtod
- (loc->mbuf, uint8_t *));
- /* Check against minimal length. */
- if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
- return MLX5_TXCMP_CODE_ERROR;
- if (loc->mbuf->ol_flags &
- PKT_TX_DYNF_NOINLINE) {
- /*
- * The hint flag not to inline packet
- * data is set. Check whether we can
- * follow the hint.
- */
- if ((!MLX5_TXOFF_CONFIG(EMPW) &&
- txq->inlen_mode) ||
- (MLX5_TXOFF_CONFIG(MPW) &&
- txq->inlen_mode)) {
- if (inlen <= txq->inlen_send)
- goto single_inline;
- /*
- * The hardware requires the
- * minimal inline data header.
- */
- goto single_min_inline;
- }
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- vlan && !txq->vlan_en) {
- /*
- * We must insert VLAN tag
- * by software means.
- */
- goto single_part_inline;
- }
- goto single_no_inline;
- }
-single_inline:
- /*
- * Completely inlined packet data WQE:
- * - Control Segment, SEND opcode
- * - Ethernet Segment, no VLAN insertion
- * - Data inlined, VLAN optionally inserted
- * - Alignment to MLX5_WSEG_SIZE
- * Have to estimate amount of WQEBBs
- */
- seg_n = (inlen + 3 * MLX5_WSEG_SIZE -
- MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- /* Check if there are enough WQEBBs. */
- wqe_n = (seg_n + 3) / 4;
- if (wqe_n > loc->wqe_free)
- return MLX5_TXCMP_CODE_EXIT;
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, seg_n,
- MLX5_OPCODE_SEND, olx);
- mlx5_tx_eseg_data(txq, loc, wqe,
- vlan, inlen, 0, olx);
- txq->wqe_ci += wqe_n;
- loc->wqe_free -= wqe_n;
- /*
- * Packet data are completely inlined,
- * free the packet immediately.
- */
- rte_pktmbuf_free_seg(loc->mbuf);
- } else if ((!MLX5_TXOFF_CONFIG(EMPW) ||
- MLX5_TXOFF_CONFIG(MPW)) &&
- txq->inlen_mode) {
- /*
- * If minimal inlining is requested the eMPW
- * feature should be disabled due to data is
- * inlined into Ethernet Segment, which can
- * not contain inlined data for eMPW due to
- * segment shared for all packets.
- */
- struct mlx5_wqe_dseg *__rte_restrict dseg;
- unsigned int ds;
- uint8_t *dptr;
-
- /*
- * The inline-mode settings require
- * to inline the specified amount of
- * data bytes to the Ethernet Segment.
- * We should check the free space in
- * WQE ring buffer to inline partially.
- */
-single_min_inline:
- MLX5_ASSERT(txq->inlen_send >= txq->inlen_mode);
- MLX5_ASSERT(inlen > txq->inlen_mode);
- MLX5_ASSERT(txq->inlen_mode >=
- MLX5_ESEG_MIN_INLINE_SIZE);
- /*
- * Check whether there are enough free WQEBBs:
- * - Control Segment
- * - Ethernet Segment
- * - First Segment of inlined Ethernet data
- * - ... data continued ...
- * - Finishing Data Segment of pointer type
- */
- ds = (MLX5_WQE_CSEG_SIZE +
- MLX5_WQE_ESEG_SIZE +
- MLX5_WQE_DSEG_SIZE +
- txq->inlen_mode -
- MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WQE_DSEG_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- if (loc->wqe_free < ((ds + 3) / 4))
- return MLX5_TXCMP_CODE_EXIT;
- /*
- * Build the ordinary SEND WQE:
- * - Control Segment
- * - Ethernet Segment, inline inlen_mode bytes
- * - Data Segment of pointer type
- */
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, ds,
- MLX5_OPCODE_SEND, olx);
- dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan,
- txq->inlen_mode,
- 0, olx);
- dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
- txq->inlen_mode - vlan;
- inlen -= txq->inlen_mode;
- mlx5_tx_dseg_ptr(txq, loc, dseg,
- dptr, inlen, olx);
- /*
- * WQE is built, update the loop parameters
- * and got to the next packet.
- */
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- /* We have to store mbuf in elts.*/
- MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
- txq->elts[txq->elts_head++ & txq->elts_m] =
- loc->mbuf;
- --loc->elts_free;
- } else {
- uint8_t *dptr;
- unsigned int dlen;
-
- /*
- * Partially inlined packet data WQE, we have
- * some space in title WQEBB, we can fill it
- * with some packet data. It takes one WQEBB,
- * it is available, no extra space check:
- * - Control Segment, SEND opcode
- * - Ethernet Segment, no VLAN insertion
- * - MLX5_ESEG_MIN_INLINE_SIZE bytes of Data
- * - Data Segment, pointer type
- *
- * We also get here if VLAN insertion is not
- * supported by HW, the inline is enabled.
- */
-single_part_inline:
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, 4,
- MLX5_OPCODE_SEND, olx);
- mlx5_tx_eseg_dmin(txq, loc, wqe, vlan, olx);
- dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
- MLX5_ESEG_MIN_INLINE_SIZE - vlan;
- /*
- * The length check is performed above, by
- * comparing with txq->inlen_send. We should
- * not get overflow here.
- */
- MLX5_ASSERT(inlen > MLX5_ESEG_MIN_INLINE_SIZE);
- dlen = inlen - MLX5_ESEG_MIN_INLINE_SIZE;
- mlx5_tx_dseg_ptr(txq, loc, &wqe->dseg[1],
- dptr, dlen, olx);
- ++txq->wqe_ci;
- --loc->wqe_free;
- /* We have to store mbuf in elts.*/
- MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
- txq->elts[txq->elts_head++ & txq->elts_m] =
- loc->mbuf;
- --loc->elts_free;
- }
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += vlan +
- rte_pktmbuf_data_len(loc->mbuf);
-#endif
- } else {
- /*
- * No inline at all, it means the CPU cycles saving
- * is prioritized at configuration, we should not
- * copy any packet data to WQE.
- *
- * SEND WQE, one WQEBB:
- * - Control Segment, SEND opcode
- * - Ethernet Segment, optional VLAN, no inline
- * - Data Segment, pointer type
- */
-single_no_inline:
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, 3,
- MLX5_OPCODE_SEND, olx);
- mlx5_tx_eseg_none(txq, loc, wqe, olx);
- mlx5_tx_dseg_ptr
- (txq, loc, &wqe->dseg[0],
- rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
- rte_pktmbuf_data_len(loc->mbuf), olx);
- ++txq->wqe_ci;
- --loc->wqe_free;
- /*
- * We should not store mbuf pointer in elts
- * if no inlining is configured, this is done
- * by calling routine in a batch copy.
- */
- MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
- --loc->elts_free;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += rte_pktmbuf_data_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
- txq->stats.obytes +=
- sizeof(struct rte_vlan_hdr);
-#endif
- }
- ++loc->pkts_sent;
- --pkts_n;
- if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- loc->mbuf = *pkts++;
- if (pkts_n > 1)
- rte_prefetch0(*pkts);
- ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
- if (unlikely(ret != MLX5_TXCMP_CODE_SINGLE))
- return ret;
- }
- MLX5_ASSERT(false);
-}
-
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_single(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *__rte_restrict loc,
- unsigned int olx)
-{
- enum mlx5_txcmp_code ret;
-
- ret = mlx5_tx_able_to_empw(txq, loc, olx, false);
- if (ret == MLX5_TXCMP_CODE_SINGLE)
- goto ordinary_send;
- MLX5_ASSERT(ret == MLX5_TXCMP_CODE_EMPW);
- for (;;) {
- /* Optimize for inline/no inline eMPW send. */
- ret = (MLX5_TXOFF_CONFIG(INLINE)) ?
- mlx5_tx_burst_empw_inline
- (txq, pkts, pkts_n, loc, olx) :
- mlx5_tx_burst_empw_simple
- (txq, pkts, pkts_n, loc, olx);
- if (ret != MLX5_TXCMP_CODE_SINGLE)
- return ret;
- /* The resources to send one packet should remain. */
- MLX5_ASSERT(loc->elts_free && loc->wqe_free);
-ordinary_send:
- ret = mlx5_tx_burst_single_send(txq, pkts, pkts_n, loc, olx);
- MLX5_ASSERT(ret != MLX5_TXCMP_CODE_SINGLE);
- if (ret != MLX5_TXCMP_CODE_EMPW)
- return ret;
- /* The resources to send one packet should remain. */
- MLX5_ASSERT(loc->elts_free && loc->wqe_free);
- }
-}
-
-/**
- * DPDK Tx callback template. This is configured template
- * used to generate routines optimized for specified offload setup.
- * One of this generated functions is chosen at SQ configuration
- * time.
- *
- * @param txq
- * Generic pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
- * @param olx
- * Configured offloads mask, presents the bits of MLX5_TXOFF_CONFIG_xxx
- * values. Should be static to take compile time static configuration
- * advantages.
- *
- * @return
- * Number of packets successfully transmitted (<= pkts_n).
- */
-static __rte_always_inline uint16_t
-mlx5_tx_burst_tmpl(struct mlx5_txq_data *__rte_restrict txq,
- struct rte_mbuf **__rte_restrict pkts,
- uint16_t pkts_n,
- unsigned int olx)
-{
- struct mlx5_txq_local loc;
- enum mlx5_txcmp_code ret;
- unsigned int part;
-
- MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
- MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
- if (unlikely(!pkts_n))
- return 0;
- if (MLX5_TXOFF_CONFIG(INLINE))
- loc.mbuf_free = 0;
- loc.pkts_sent = 0;
- loc.pkts_copy = 0;
- loc.wqe_last = NULL;
-
-send_loop:
- loc.pkts_loop = loc.pkts_sent;
- /*
- * Check if there are some CQEs, if any:
- * - process an encountered errors
- * - process the completed WQEs
- * - free related mbufs
- * - doorbell the NIC about processed CQEs
- */
- rte_prefetch0(*(pkts + loc.pkts_sent));
- mlx5_tx_handle_completion(txq, olx);
- /*
- * Calculate the number of available resources - elts and WQEs.
- * There are two possible different scenarios:
- * - no data inlining into WQEs, one WQEBB may contains up to
- * four packets, in this case elts become scarce resource
- * - data inlining into WQEs, one packet may require multiple
- * WQEBBs, the WQEs become the limiting factor.
- */
- MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
- loc.elts_free = txq->elts_s -
- (uint16_t)(txq->elts_head - txq->elts_tail);
- MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
- loc.wqe_free = txq->wqe_s -
- (uint16_t)(txq->wqe_ci - txq->wqe_pi);
- if (unlikely(!loc.elts_free || !loc.wqe_free))
- goto burst_exit;
- for (;;) {
- /*
- * Fetch the packet from array. Usually this is
- * the first packet in series of multi/single
- * segment packets.
- */
- loc.mbuf = *(pkts + loc.pkts_sent);
- /* Dedicated branch for multi-segment packets. */
- if (MLX5_TXOFF_CONFIG(MULTI) &&
- unlikely(NB_SEGS(loc.mbuf) > 1)) {
- /*
- * Multi-segment packet encountered.
- * Hardware is able to process it only
- * with SEND/TSO opcodes, one packet
- * per WQE, do it in dedicated routine.
- */
-enter_send_multi:
- MLX5_ASSERT(loc.pkts_sent >= loc.pkts_copy);
- part = loc.pkts_sent - loc.pkts_copy;
- if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
- /*
- * There are some single-segment mbufs not
- * stored in elts. The mbufs must be in the
- * same order as WQEs, so we must copy the
- * mbufs to elts here, before the coming
- * multi-segment packet mbufs is appended.
- */
- mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy,
- part, olx);
- loc.pkts_copy = loc.pkts_sent;
- }
- MLX5_ASSERT(pkts_n > loc.pkts_sent);
- ret = mlx5_tx_burst_mseg(txq, pkts, pkts_n, &loc, olx);
- if (!MLX5_TXOFF_CONFIG(INLINE))
- loc.pkts_copy = loc.pkts_sent;
- /*
- * These returned code checks are supposed
- * to be optimized out due to routine inlining.
- */
- if (ret == MLX5_TXCMP_CODE_EXIT) {
- /*
- * The routine returns this code when
- * all packets are sent or there is no
- * enough resources to complete request.
- */
- break;
- }
- if (ret == MLX5_TXCMP_CODE_ERROR) {
- /*
- * The routine returns this code when
- * some error in the incoming packets
- * format occurred.
- */
- txq->stats.oerrors++;
- break;
- }
- if (ret == MLX5_TXCMP_CODE_SINGLE) {
- /*
- * The single-segment packet was encountered
- * in the array, try to send it with the
- * best optimized way, possible engaging eMPW.
- */
- goto enter_send_single;
- }
- if (MLX5_TXOFF_CONFIG(TSO) &&
- ret == MLX5_TXCMP_CODE_TSO) {
- /*
- * The single-segment TSO packet was
- * encountered in the array.
- */
- goto enter_send_tso;
- }
- /* We must not get here. Something is going wrong. */
- MLX5_ASSERT(false);
- txq->stats.oerrors++;
- break;
- }
- /* Dedicated branch for single-segment TSO packets. */
- if (MLX5_TXOFF_CONFIG(TSO) &&
- unlikely(loc.mbuf->ol_flags & PKT_TX_TCP_SEG)) {
- /*
- * TSO might require special way for inlining
- * (dedicated parameters) and is sent with
- * MLX5_OPCODE_TSO opcode only, provide this
- * in dedicated branch.
- */
-enter_send_tso:
- MLX5_ASSERT(NB_SEGS(loc.mbuf) == 1);
- MLX5_ASSERT(pkts_n > loc.pkts_sent);
- ret = mlx5_tx_burst_tso(txq, pkts, pkts_n, &loc, olx);
- /*
- * These returned code checks are supposed
- * to be optimized out due to routine inlining.
- */
- if (ret == MLX5_TXCMP_CODE_EXIT)
- break;
- if (ret == MLX5_TXCMP_CODE_ERROR) {
- txq->stats.oerrors++;
- break;
- }
- if (ret == MLX5_TXCMP_CODE_SINGLE)
- goto enter_send_single;
- if (MLX5_TXOFF_CONFIG(MULTI) &&
- ret == MLX5_TXCMP_CODE_MULTI) {
- /*
- * The multi-segment packet was
- * encountered in the array.
- */
- goto enter_send_multi;
- }
- /* We must not get here. Something is going wrong. */
- MLX5_ASSERT(false);
- txq->stats.oerrors++;
- break;
- }
- /*
- * The dedicated branch for the single-segment packets
- * without TSO. Often these ones can be sent using
- * MLX5_OPCODE_EMPW with multiple packets in one WQE.
- * The routine builds the WQEs till it encounters
- * the TSO or multi-segment packet (in case if these
- * offloads are requested at SQ configuration time).
- */
-enter_send_single:
- MLX5_ASSERT(pkts_n > loc.pkts_sent);
- ret = mlx5_tx_burst_single(txq, pkts, pkts_n, &loc, olx);
- /*
- * These returned code checks are supposed
- * to be optimized out due to routine inlining.
- */
- if (ret == MLX5_TXCMP_CODE_EXIT)
- break;
- if (ret == MLX5_TXCMP_CODE_ERROR) {
- txq->stats.oerrors++;
- break;
- }
- if (MLX5_TXOFF_CONFIG(MULTI) &&
- ret == MLX5_TXCMP_CODE_MULTI) {
- /*
- * The multi-segment packet was
- * encountered in the array.
- */
- goto enter_send_multi;
- }
- if (MLX5_TXOFF_CONFIG(TSO) &&
- ret == MLX5_TXCMP_CODE_TSO) {
- /*
- * The single-segment TSO packet was
- * encountered in the array.
- */
- goto enter_send_tso;
- }
- /* We must not get here. Something is going wrong. */
- MLX5_ASSERT(false);
- txq->stats.oerrors++;
- break;
- }
- /*
- * Main Tx loop is completed, do the rest:
- * - set completion request if thresholds are reached
- * - doorbell the hardware
- * - copy the rest of mbufs to elts (if any)
- */
- MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE) ||
- loc.pkts_sent >= loc.pkts_copy);
- /* Take a shortcut if nothing is sent. */
- if (unlikely(loc.pkts_sent == loc.pkts_loop))
- goto burst_exit;
- /* Request CQE generation if limits are reached. */
- mlx5_tx_request_completion(txq, &loc, olx);
- /*
- * Ring QP doorbell immediately after WQE building completion
- * to improve latencies. The pure software related data treatment
- * can be completed after doorbell. Tx CQEs for this SQ are
- * processed in this thread only by the polling.
- *
- * The rdma core library can map doorbell register in two ways,
- * depending on the environment variable "MLX5_SHUT_UP_BF":
- *
- * - as regular cached memory, the variable is either missing or
- * set to zero. This type of mapping may cause the significant
- * doorbell register writing latency and requires explicit
- * memory write barrier to mitigate this issue and prevent
- * write combining.
- *
- * - as non-cached memory, the variable is present and set to
- * not "0" value. This type of mapping may cause performance
- * impact under heavy loading conditions but the explicit write
- * memory barrier is not required and it may improve core
- * performance.
- *
- * - the legacy behaviour (prior 19.08 release) was to use some
- * heuristics to decide whether write memory barrier should
- * be performed. This behavior is supported with specifying
- * tx_db_nc=2, write barrier is skipped if application
- * provides the full recommended burst of packets, it
- * supposes the next packets are coming and the write barrier
- * will be issued on the next burst (after descriptor writing,
- * at least).
- */
- mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, !txq->db_nc &&
- (!txq->db_heu || pkts_n % MLX5_TX_DEFAULT_BURST));
- /* Not all of the mbufs may be stored into elts yet. */
- part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent - loc.pkts_copy;
- if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
- /*
- * There are some single-segment mbufs not stored in elts.
- * It can be only if the last packet was single-segment.
- * The copying is gathered into one place due to it is
- * a good opportunity to optimize that with SIMD.
- * Unfortunately if inlining is enabled the gaps in
- * pointer array may happen due to early freeing of the
- * inlined mbufs.
- */
- mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy, part, olx);
- loc.pkts_copy = loc.pkts_sent;
- }
- MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
- MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
- if (pkts_n > loc.pkts_sent) {
- /*
- * If burst size is large there might be no enough CQE
- * fetched from completion queue and no enough resources
- * freed to send all the packets.
- */
- goto send_loop;
- }
-burst_exit:
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Increment sent packets counter. */
- txq->stats.opackets += loc.pkts_sent;
-#endif
- if (MLX5_TXOFF_CONFIG(INLINE) && loc.mbuf_free)
- __mlx5_tx_free_mbuf(txq, pkts, loc.mbuf_free, olx);
- return loc.pkts_sent;
-}
-
/* Generate routines with Enhanced Multi-Packet Write support. */
MLX5_TXOFF_DECL(full_empw,
MLX5_TXOFF_CONFIG_FULL | MLX5_TXOFF_CONFIG_EMPW)
@@ -20,8 +20,64 @@
#include "mlx5_autoconf.h"
#include "mlx5_mr.h"
+/* TX burst subroutines return codes. */
+enum mlx5_txcmp_code {
+ MLX5_TXCMP_CODE_EXIT = 0,
+ MLX5_TXCMP_CODE_ERROR,
+ MLX5_TXCMP_CODE_SINGLE,
+ MLX5_TXCMP_CODE_MULTI,
+ MLX5_TXCMP_CODE_TSO,
+ MLX5_TXCMP_CODE_EMPW,
+};
+
+/*
+ * These defines are used to configure Tx burst routine option set supported
+ * at compile time. The not specified options are optimized out due to if
+ * conditions can be explicitly calculated at compile time.
+ * The offloads with bigger runtime check (require more CPU cycles toskip)
+ * overhead should have the bigger index - this is needed to select the better
+ * matching routine function if no exact match and some offloads are not
+ * actually requested.
+ */
+#define MLX5_TXOFF_CONFIG_MULTI (1u << 0) /* Multi-segment packets.*/
+#define MLX5_TXOFF_CONFIG_TSO (1u << 1) /* TCP send offload supported.*/
+#define MLX5_TXOFF_CONFIG_SWP (1u << 2) /* Tunnels/SW Parser offloads.*/
+#define MLX5_TXOFF_CONFIG_CSUM (1u << 3) /* Check Sums offloaded. */
+#define MLX5_TXOFF_CONFIG_INLINE (1u << 4) /* Data inlining supported. */
+#define MLX5_TXOFF_CONFIG_VLAN (1u << 5) /* VLAN insertion supported.*/
+#define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
+#define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW supported.*/
+#define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW supported.*/
+#define MLX5_TXOFF_CONFIG_TXPP (1u << 10) /* Scheduling on timestamp.*/
+
+/* The most common offloads groups. */
+#define MLX5_TXOFF_CONFIG_NONE 0
+#define MLX5_TXOFF_CONFIG_FULL (MLX5_TXOFF_CONFIG_MULTI | \
+ MLX5_TXOFF_CONFIG_TSO | \
+ MLX5_TXOFF_CONFIG_SWP | \
+ MLX5_TXOFF_CONFIG_CSUM | \
+ MLX5_TXOFF_CONFIG_INLINE | \
+ MLX5_TXOFF_CONFIG_VLAN | \
+ MLX5_TXOFF_CONFIG_METADATA)
+
+#define MLX5_TXOFF_CONFIG(mask) (olx & MLX5_TXOFF_CONFIG_##mask)
+
+#define MLX5_TXOFF_DECL(func, olx) \
+static uint16_t mlx5_tx_burst_##func(void *txq, \
+ struct rte_mbuf **pkts, \
+ uint16_t pkts_n) \
+{ \
+ return mlx5_tx_burst_tmpl((struct mlx5_txq_data *)txq, \
+ pkts, pkts_n, (olx)); \
+}
+
/* Mbuf dynamic flag offset for inline. */
extern uint64_t rte_net_mlx5_dynf_inline_mask;
+#define PKT_TX_DYNF_NOINLINE rte_net_mlx5_dynf_inline_mask
+
+extern uint32_t mlx5_ptype_table[] __rte_cache_aligned;
+extern uint8_t mlx5_cksum_table[1 << 10] __rte_cache_aligned;
+extern uint8_t mlx5_swp_types_table[1 << 10] __rte_cache_aligned;
struct mlx5_txq_stats {
#ifdef MLX5_PMD_SOFT_COUNTERS
@@ -167,6 +223,8 @@ struct mlx5_txq_ctrl *mlx5_txq_hairpin_new
uint16_t removed_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts,
uint16_t pkts_n);
+void mlx5_tx_handle_completion(struct mlx5_txq_data *__rte_restrict txq,
+ unsigned int olx __rte_unused);
int mlx5_tx_descriptor_status(void *tx_queue, uint16_t offset);
void mlx5_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
struct rte_eth_txq_info *qinfo);
@@ -368,4 +426,3250 @@ uint32_t mlx5_tx_update_ext_mp(struct mlx5_txq_data *txq, uintptr_t addr,
return ci;
}
+/**
+ * Set Software Parser flags and offsets in Ethernet Segment of WQE.
+ * Flags must be preliminary initialized to zero.
+ *
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param swp_flags
+ * Pointer to store Software Parser flags.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Software Parser offsets packed in dword.
+ * Software Parser flags are set by pointer.
+ */
+static __rte_always_inline uint32_t
+txq_mbuf_to_swp(struct mlx5_txq_local *__rte_restrict loc,
+ uint8_t *swp_flags,
+ unsigned int olx)
+{
+ uint64_t ol, tunnel;
+ unsigned int idx, off;
+ uint32_t set;
+
+ if (!MLX5_TXOFF_CONFIG(SWP))
+ return 0;
+ ol = loc->mbuf->ol_flags;
+ tunnel = ol & PKT_TX_TUNNEL_MASK;
+ /*
+ * Check whether Software Parser is required.
+ * Only customized tunnels may ask for.
+ */
+ if (likely(tunnel != PKT_TX_TUNNEL_UDP && tunnel != PKT_TX_TUNNEL_IP))
+ return 0;
+ /*
+ * The index should have:
+ * bit[0:1] = PKT_TX_L4_MASK
+ * bit[4] = PKT_TX_IPV6
+ * bit[8] = PKT_TX_OUTER_IPV6
+ * bit[9] = PKT_TX_OUTER_UDP
+ */
+ idx = (ol & (PKT_TX_L4_MASK | PKT_TX_IPV6 | PKT_TX_OUTER_IPV6)) >> 52;
+ idx |= (tunnel == PKT_TX_TUNNEL_UDP) ? (1 << 9) : 0;
+ *swp_flags = mlx5_swp_types_table[idx];
+ /*
+ * Set offsets for SW parser. Since ConnectX-5, SW parser just
+ * complements HW parser. SW parser starts to engage only if HW parser
+ * can't reach a header. For the older devices, HW parser will not kick
+ * in if any of SWP offsets is set. Therefore, all of the L3 offsets
+ * should be set regardless of HW offload.
+ */
+ off = loc->mbuf->outer_l2_len;
+ if (MLX5_TXOFF_CONFIG(VLAN) && ol & PKT_TX_VLAN_PKT)
+ off += sizeof(struct rte_vlan_hdr);
+ set = (off >> 1) << 8; /* Outer L3 offset. */
+ off += loc->mbuf->outer_l3_len;
+ if (tunnel == PKT_TX_TUNNEL_UDP)
+ set |= off >> 1; /* Outer L4 offset. */
+ if (ol & (PKT_TX_IPV4 | PKT_TX_IPV6)) { /* Inner IP. */
+ const uint64_t csum = ol & PKT_TX_L4_MASK;
+ off += loc->mbuf->l2_len;
+ set |= (off >> 1) << 24; /* Inner L3 offset. */
+ if (csum == PKT_TX_TCP_CKSUM ||
+ csum == PKT_TX_UDP_CKSUM ||
+ (MLX5_TXOFF_CONFIG(TSO) && ol & PKT_TX_TCP_SEG)) {
+ off += loc->mbuf->l3_len;
+ set |= (off >> 1) << 16; /* Inner L4 offset. */
+ }
+ }
+ set = rte_cpu_to_le_32(set);
+ return set;
+}
+
+/**
+ * Convert the Checksum offloads to Verbs.
+ *
+ * @param buf
+ * Pointer to the mbuf.
+ *
+ * @return
+ * Converted checksum flags.
+ */
+static __rte_always_inline uint8_t
+txq_ol_cksum_to_cs(struct rte_mbuf *buf)
+{
+ uint32_t idx;
+ uint8_t is_tunnel = !!(buf->ol_flags & PKT_TX_TUNNEL_MASK);
+ const uint64_t ol_flags_mask = PKT_TX_TCP_SEG | PKT_TX_L4_MASK |
+ PKT_TX_IP_CKSUM | PKT_TX_OUTER_IP_CKSUM;
+
+ /*
+ * The index should have:
+ * bit[0] = PKT_TX_TCP_SEG
+ * bit[2:3] = PKT_TX_UDP_CKSUM, PKT_TX_TCP_CKSUM
+ * bit[4] = PKT_TX_IP_CKSUM
+ * bit[8] = PKT_TX_OUTER_IP_CKSUM
+ * bit[9] = tunnel
+ */
+ idx = ((buf->ol_flags & ol_flags_mask) >> 50) | (!!is_tunnel << 9);
+ return mlx5_cksum_table[idx];
+}
+
+/**
+ * Free the mbufs from the linear array of pointers.
+ *
+ * @param txq
+ * Pointer to Tx queue structure.
+ * @param pkts
+ * Pointer to array of packets to be free.
+ * @param pkts_n
+ * Number of packets to be freed.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ unsigned int olx __rte_unused)
+{
+ struct rte_mempool *pool = NULL;
+ struct rte_mbuf **p_free = NULL;
+ struct rte_mbuf *mbuf;
+ unsigned int n_free = 0;
+
+ /*
+ * The implemented algorithm eliminates
+ * copying pointers to temporary array
+ * for rte_mempool_put_bulk() calls.
+ */
+ MLX5_ASSERT(pkts);
+ MLX5_ASSERT(pkts_n);
+ /*
+ * Free mbufs directly to the pool in bulk
+ * if fast free offload is engaged
+ */
+ if (!MLX5_TXOFF_CONFIG(MULTI) && txq->fast_free) {
+ mbuf = *pkts;
+ pool = mbuf->pool;
+ rte_mempool_put_bulk(pool, (void *)pkts, pkts_n);
+ return;
+ }
+ for (;;) {
+ for (;;) {
+ /*
+ * Decrement mbuf reference counter, detach
+ * indirect and external buffers if needed.
+ */
+ mbuf = rte_pktmbuf_prefree_seg(*pkts);
+ if (likely(mbuf != NULL)) {
+ MLX5_ASSERT(mbuf == *pkts);
+ if (likely(n_free != 0)) {
+ if (unlikely(pool != mbuf->pool))
+ /* From different pool. */
+ break;
+ } else {
+ /* Start new scan array. */
+ pool = mbuf->pool;
+ p_free = pkts;
+ }
+ ++n_free;
+ ++pkts;
+ --pkts_n;
+ if (unlikely(pkts_n == 0)) {
+ mbuf = NULL;
+ break;
+ }
+ } else {
+ /*
+ * This happens if mbuf is still referenced.
+ * We can't put it back to the pool, skip.
+ */
+ ++pkts;
+ --pkts_n;
+ if (unlikely(n_free != 0))
+ /* There is some array to free.*/
+ break;
+ if (unlikely(pkts_n == 0))
+ /* Last mbuf, nothing to free. */
+ return;
+ }
+ }
+ for (;;) {
+ /*
+ * This loop is implemented to avoid multiple
+ * inlining of rte_mempool_put_bulk().
+ */
+ MLX5_ASSERT(pool);
+ MLX5_ASSERT(p_free);
+ MLX5_ASSERT(n_free);
+ /*
+ * Free the array of pre-freed mbufs
+ * belonging to the same memory pool.
+ */
+ rte_mempool_put_bulk(pool, (void *)p_free, n_free);
+ if (unlikely(mbuf != NULL)) {
+ /* There is the request to start new scan. */
+ pool = mbuf->pool;
+ p_free = pkts++;
+ n_free = 1;
+ --pkts_n;
+ if (likely(pkts_n != 0))
+ break;
+ /*
+ * This is the last mbuf to be freed.
+ * Do one more loop iteration to complete.
+ * This is rare case of the last unique mbuf.
+ */
+ mbuf = NULL;
+ continue;
+ }
+ if (likely(pkts_n == 0))
+ return;
+ n_free = 0;
+ break;
+ }
+ }
+}
+
+/**
+ * No inline version to free buffers for optimal call
+ * on the tx_burst completion.
+ */
+static __rte_noinline void
+__mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ unsigned int olx __rte_unused)
+{
+ mlx5_tx_free_mbuf(txq, pkts, pkts_n, olx);
+}
+
+/**
+ * Free the mbuf from the elts ring buffer till new tail.
+ *
+ * @param txq
+ * Pointer to Tx queue structure.
+ * @param tail
+ * Index in elts to free up to, becomes new elts tail.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_free_elts(struct mlx5_txq_data *__rte_restrict txq,
+ uint16_t tail,
+ unsigned int olx __rte_unused)
+{
+ uint16_t n_elts = tail - txq->elts_tail;
+
+ MLX5_ASSERT(n_elts);
+ MLX5_ASSERT(n_elts <= txq->elts_s);
+ /*
+ * Implement a loop to support ring buffer wraparound
+ * with single inlining of mlx5_tx_free_mbuf().
+ */
+ do {
+ unsigned int part;
+
+ part = txq->elts_s - (txq->elts_tail & txq->elts_m);
+ part = RTE_MIN(part, n_elts);
+ MLX5_ASSERT(part);
+ MLX5_ASSERT(part <= txq->elts_s);
+ mlx5_tx_free_mbuf(txq,
+ &txq->elts[txq->elts_tail & txq->elts_m],
+ part, olx);
+ txq->elts_tail += part;
+ n_elts -= part;
+ } while (n_elts);
+}
+
+/**
+ * Store the mbuf being sent into elts ring buffer.
+ * On Tx completion these mbufs will be freed.
+ *
+ * @param txq
+ * Pointer to Tx queue structure.
+ * @param pkts
+ * Pointer to array of packets to be stored.
+ * @param pkts_n
+ * Number of packets to be stored.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_copy_elts(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ unsigned int olx __rte_unused)
+{
+ unsigned int part;
+ struct rte_mbuf **elts = (struct rte_mbuf **)txq->elts;
+
+ MLX5_ASSERT(pkts);
+ MLX5_ASSERT(pkts_n);
+ part = txq->elts_s - (txq->elts_head & txq->elts_m);
+ MLX5_ASSERT(part);
+ MLX5_ASSERT(part <= txq->elts_s);
+ /* This code is a good candidate for vectorizing with SIMD. */
+ rte_memcpy((void *)(elts + (txq->elts_head & txq->elts_m)),
+ (void *)pkts,
+ RTE_MIN(part, pkts_n) * sizeof(struct rte_mbuf *));
+ txq->elts_head += pkts_n;
+ if (unlikely(part < pkts_n))
+ /* The copy is wrapping around the elts array. */
+ rte_memcpy((void *)elts, (void *)(pkts + part),
+ (pkts_n - part) * sizeof(struct rte_mbuf *));
+}
+
+/**
+ * Check if the completion request flag should be set in the last WQE.
+ * Both pushed mbufs and WQEs are monitored and the completion request
+ * flag is set if any of thresholds is reached.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_request_completion(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ uint16_t head = txq->elts_head;
+ unsigned int part;
+
+ part = MLX5_TXOFF_CONFIG(INLINE) ?
+ 0 : loc->pkts_sent - loc->pkts_copy;
+ head += part;
+ if ((uint16_t)(head - txq->elts_comp) >= MLX5_TX_COMP_THRESH ||
+ (MLX5_TXOFF_CONFIG(INLINE) &&
+ (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
+ volatile struct mlx5_wqe *last = loc->wqe_last;
+
+ MLX5_ASSERT(last);
+ txq->elts_comp = head;
+ if (MLX5_TXOFF_CONFIG(INLINE))
+ txq->wqe_comp = txq->wqe_ci;
+ /* Request unconditional completion on last WQE. */
+ last->cseg.flags = RTE_BE32(MLX5_COMP_ALWAYS <<
+ MLX5_COMP_MODE_OFFSET);
+ /* Save elts_head in dedicated free on completion queue. */
+#ifdef RTE_LIBRTE_MLX5_DEBUG
+ txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head |
+ (last->cseg.opcode >> 8) << 16;
+#else
+ txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head;
+#endif
+ /* A CQE slot must always be available. */
+ MLX5_ASSERT((txq->cq_pi - txq->cq_ci) <= txq->cqe_s);
+ }
+}
+
+/**
+ * Build the Control Segment with specified opcode:
+ * - MLX5_OPCODE_SEND
+ * - MLX5_OPCODE_ENHANCED_MPSW
+ * - MLX5_OPCODE_TSO
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Control Segment.
+ * @param ds
+ * Supposed length of WQE in segments.
+ * @param opcode
+ * SQ WQE opcode to put into Control Segment.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_cseg_init(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc __rte_unused,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int ds,
+ unsigned int opcode,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_cseg *__rte_restrict cs = &wqe->cseg;
+
+ /* For legacy MPW replace the EMPW by TSO with modifier. */
+ if (MLX5_TXOFF_CONFIG(MPW) && opcode == MLX5_OPCODE_ENHANCED_MPSW)
+ opcode = MLX5_OPCODE_TSO | MLX5_OPC_MOD_MPW << 24;
+ cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
+ cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
+ cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
+ MLX5_COMP_MODE_OFFSET);
+ cs->misc = RTE_BE32(0);
+}
+
+/**
+ * Build the Synchronize Queue Segment with specified completion index.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Control Segment.
+ * @param wci
+ * Completion index in Clock Queue to wait.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_wseg_init(struct mlx5_txq_data *restrict txq,
+ struct mlx5_txq_local *restrict loc __rte_unused,
+ struct mlx5_wqe *restrict wqe,
+ unsigned int wci,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_qseg *qs;
+
+ qs = RTE_PTR_ADD(wqe, MLX5_WSEG_SIZE);
+ qs->max_index = rte_cpu_to_be_32(wci);
+ qs->qpn_cqn = rte_cpu_to_be_32(txq->sh->txpp.clock_queue.cq_obj.cq->id);
+ qs->reserved0 = RTE_BE32(0);
+ qs->reserved1 = RTE_BE32(0);
+}
+
+/**
+ * Build the Ethernet Segment without inlined data.
+ * Supports Software Parser, Checksums and VLAN insertion Tx offload features.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet Segment.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_eseg_none(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int olx)
+{
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
+ uint32_t csum;
+
+ /*
+ * Calculate and set check sum flags first, dword field
+ * in segment may be shared with Software Parser flags.
+ */
+ csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
+ es->flags = rte_cpu_to_le_32(csum);
+ /*
+ * Calculate and set Software Parser offsets and flags.
+ * These flags a set for custom UDP and IP tunnel packets.
+ */
+ es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
+ /* Fill metadata field if needed. */
+ es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
+ /* Engage VLAN tag insertion feature if requested. */
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
+ /*
+ * We should get here only if device support
+ * this feature correctly.
+ */
+ MLX5_ASSERT(txq->vlan_en);
+ es->inline_hdr = rte_cpu_to_be_32(MLX5_ETH_WQE_VLAN_INSERT |
+ loc->mbuf->vlan_tci);
+ } else {
+ es->inline_hdr = RTE_BE32(0);
+ }
+}
+
+/**
+ * Build the Ethernet Segment with minimal inlined data
+ * of MLX5_ESEG_MIN_INLINE_SIZE bytes length. This is
+ * used to fill the gap in single WQEBB WQEs.
+ * Supports Software Parser, Checksums and VLAN
+ * insertion Tx offload features.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet Segment.
+ * @param vlan
+ * Length of VLAN tag insertion if any.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_eseg_dmin(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int vlan,
+ unsigned int olx)
+{
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
+ uint32_t csum;
+ uint8_t *psrc, *pdst;
+
+ /*
+ * Calculate and set check sum flags first, dword field
+ * in segment may be shared with Software Parser flags.
+ */
+ csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
+ es->flags = rte_cpu_to_le_32(csum);
+ /*
+ * Calculate and set Software Parser offsets and flags.
+ * These flags a set for custom UDP and IP tunnel packets.
+ */
+ es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
+ /* Fill metadata field if needed. */
+ es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
+ psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
+ es->inline_hdr_sz = RTE_BE16(MLX5_ESEG_MIN_INLINE_SIZE);
+ es->inline_data = *(unaligned_uint16_t *)psrc;
+ psrc += sizeof(uint16_t);
+ pdst = (uint8_t *)(es + 1);
+ if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
+ /* Implement VLAN tag insertion as part inline data. */
+ memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
+ pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
+ psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
+ /* Insert VLAN ethertype + VLAN tag. */
+ *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
+ ((RTE_ETHER_TYPE_VLAN << 16) |
+ loc->mbuf->vlan_tci);
+ pdst += sizeof(struct rte_vlan_hdr);
+ /* Copy the rest two bytes from packet data. */
+ MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
+ *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
+ } else {
+ /* Fill the gap in the title WQEBB with inline data. */
+ rte_mov16(pdst, psrc);
+ }
+}
+
+/**
+ * Build the Ethernet Segment with entire packet data inlining. Checks the
+ * boundary of WQEBB and ring buffer wrapping, supports Software Parser,
+ * Checksums and VLAN insertion Tx offload features.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet Segment.
+ * @param vlan
+ * Length of VLAN tag insertion if any.
+ * @param inlen
+ * Length of data to inline (VLAN included, if any).
+ * @param tso
+ * TSO flag, set mss field from the packet.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Pointer to the next Data Segment (aligned and wrapped around).
+ */
+static __rte_always_inline struct mlx5_wqe_dseg *
+mlx5_tx_eseg_data(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int vlan,
+ unsigned int inlen,
+ unsigned int tso,
+ unsigned int olx)
+{
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
+ uint32_t csum;
+ uint8_t *psrc, *pdst;
+ unsigned int part;
+
+ /*
+ * Calculate and set check sum flags first, dword field
+ * in segment may be shared with Software Parser flags.
+ */
+ csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
+ if (tso) {
+ csum <<= 24;
+ csum |= loc->mbuf->tso_segsz;
+ es->flags = rte_cpu_to_be_32(csum);
+ } else {
+ es->flags = rte_cpu_to_le_32(csum);
+ }
+ /*
+ * Calculate and set Software Parser offsets and flags.
+ * These flags a set for custom UDP and IP tunnel packets.
+ */
+ es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
+ /* Fill metadata field if needed. */
+ es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
+ psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
+ es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
+ es->inline_data = *(unaligned_uint16_t *)psrc;
+ psrc += sizeof(uint16_t);
+ pdst = (uint8_t *)(es + 1);
+ if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
+ /* Implement VLAN tag insertion as part inline data. */
+ memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
+ pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
+ psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
+ /* Insert VLAN ethertype + VLAN tag. */
+ *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
+ ((RTE_ETHER_TYPE_VLAN << 16) |
+ loc->mbuf->vlan_tci);
+ pdst += sizeof(struct rte_vlan_hdr);
+ /* Copy the rest two bytes from packet data. */
+ MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
+ *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
+ psrc += sizeof(uint16_t);
+ } else {
+ /* Fill the gap in the title WQEBB with inline data. */
+ rte_mov16(pdst, psrc);
+ psrc += sizeof(rte_v128u32_t);
+ }
+ pdst = (uint8_t *)(es + 2);
+ MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
+ MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
+ inlen -= MLX5_ESEG_MIN_INLINE_SIZE;
+ if (!inlen) {
+ MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ /*
+ * The WQEBB space availability is checked by caller.
+ * Here we should be aware of WQE ring buffer wraparound only.
+ */
+ part = (uint8_t *)txq->wqes_end - pdst;
+ part = RTE_MIN(part, inlen);
+ do {
+ rte_memcpy(pdst, psrc, part);
+ inlen -= part;
+ if (likely(!inlen)) {
+ /*
+ * If return value is not used by the caller
+ * the code below will be optimized out.
+ */
+ pdst += part;
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
+ pdst = (uint8_t *)txq->wqes;
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ pdst = (uint8_t *)txq->wqes;
+ psrc += part;
+ part = inlen;
+ } while (true);
+}
+
+/**
+ * Copy data from chain of mbuf to the specified linear buffer.
+ * Checksums and VLAN insertion Tx offload features. If data
+ * from some mbuf copied completely this mbuf is freed. Local
+ * structure is used to keep the byte stream state.
+ *
+ * @param pdst
+ * Pointer to the destination linear buffer.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param len
+ * Length of data to be copied.
+ * @param must
+ * Length of data to be copied ignoring no inline hint.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Number of actual copied data bytes. This is always greater than or
+ * equal to must parameter and might be lesser than len in no inline
+ * hint flag is encountered.
+ */
+static __rte_always_inline unsigned int
+mlx5_tx_mseg_memcpy(uint8_t *pdst,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int len,
+ unsigned int must,
+ unsigned int olx __rte_unused)
+{
+ struct rte_mbuf *mbuf;
+ unsigned int part, dlen, copy = 0;
+ uint8_t *psrc;
+
+ MLX5_ASSERT(len);
+ MLX5_ASSERT(must <= len);
+ do {
+ /* Allow zero length packets, must check first. */
+ dlen = rte_pktmbuf_data_len(loc->mbuf);
+ if (dlen <= loc->mbuf_off) {
+ /* Exhausted packet, just free. */
+ mbuf = loc->mbuf;
+ loc->mbuf = mbuf->next;
+ rte_pktmbuf_free_seg(mbuf);
+ loc->mbuf_off = 0;
+ MLX5_ASSERT(loc->mbuf_nseg > 1);
+ MLX5_ASSERT(loc->mbuf);
+ --loc->mbuf_nseg;
+ if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
+ unsigned int diff;
+
+ if (copy >= must) {
+ /*
+ * We already copied the minimal
+ * requested amount of data.
+ */
+ return copy;
+ }
+ diff = must - copy;
+ if (diff <= rte_pktmbuf_data_len(loc->mbuf)) {
+ /*
+ * Copy only the minimal required
+ * part of the data buffer.
+ */
+ len = diff;
+ }
+ }
+ continue;
+ }
+ dlen -= loc->mbuf_off;
+ psrc = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
+ loc->mbuf_off);
+ part = RTE_MIN(len, dlen);
+ rte_memcpy(pdst, psrc, part);
+ copy += part;
+ loc->mbuf_off += part;
+ len -= part;
+ if (!len) {
+ if (loc->mbuf_off >= rte_pktmbuf_data_len(loc->mbuf)) {
+ loc->mbuf_off = 0;
+ /* Exhausted packet, just free. */
+ mbuf = loc->mbuf;
+ loc->mbuf = mbuf->next;
+ rte_pktmbuf_free_seg(mbuf);
+ loc->mbuf_off = 0;
+ MLX5_ASSERT(loc->mbuf_nseg >= 1);
+ --loc->mbuf_nseg;
+ }
+ return copy;
+ }
+ pdst += part;
+ } while (true);
+}
+
+/**
+ * Build the Ethernet Segment with inlined data from multi-segment packet.
+ * Checks the boundary of WQEBB and ring buffer wrapping, supports Software
+ * Parser, Checksums and VLAN insertion Tx offload features.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet Segment.
+ * @param vlan
+ * Length of VLAN tag insertion if any.
+ * @param inlen
+ * Length of data to inline (VLAN included, if any).
+ * @param tso
+ * TSO flag, set mss field from the packet.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Pointer to the next Data Segment (aligned and possible NOT wrapped
+ * around - caller should do wrapping check on its own).
+ */
+static __rte_always_inline struct mlx5_wqe_dseg *
+mlx5_tx_eseg_mdat(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int vlan,
+ unsigned int inlen,
+ unsigned int tso,
+ unsigned int olx)
+{
+ struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
+ uint32_t csum;
+ uint8_t *pdst;
+ unsigned int part, tlen = 0;
+
+ /*
+ * Calculate and set check sum flags first, uint32_t field
+ * in segment may be shared with Software Parser flags.
+ */
+ csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
+ if (tso) {
+ csum <<= 24;
+ csum |= loc->mbuf->tso_segsz;
+ es->flags = rte_cpu_to_be_32(csum);
+ } else {
+ es->flags = rte_cpu_to_le_32(csum);
+ }
+ /*
+ * Calculate and set Software Parser offsets and flags.
+ * These flags a set for custom UDP and IP tunnel packets.
+ */
+ es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
+ /* Fill metadata field if needed. */
+ es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
+ loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
+ MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
+ pdst = (uint8_t *)&es->inline_data;
+ if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
+ /* Implement VLAN tag insertion as part inline data. */
+ mlx5_tx_mseg_memcpy(pdst, loc,
+ 2 * RTE_ETHER_ADDR_LEN,
+ 2 * RTE_ETHER_ADDR_LEN, olx);
+ pdst += 2 * RTE_ETHER_ADDR_LEN;
+ *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
+ ((RTE_ETHER_TYPE_VLAN << 16) |
+ loc->mbuf->vlan_tci);
+ pdst += sizeof(struct rte_vlan_hdr);
+ tlen += 2 * RTE_ETHER_ADDR_LEN + sizeof(struct rte_vlan_hdr);
+ }
+ MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
+ /*
+ * The WQEBB space availability is checked by caller.
+ * Here we should be aware of WQE ring buffer wraparound only.
+ */
+ part = (uint8_t *)txq->wqes_end - pdst;
+ part = RTE_MIN(part, inlen - tlen);
+ MLX5_ASSERT(part);
+ do {
+ unsigned int copy;
+
+ /*
+ * Copying may be interrupted inside the routine
+ * if run into no inline hint flag.
+ */
+ copy = tlen >= txq->inlen_mode ? 0 : (txq->inlen_mode - tlen);
+ copy = mlx5_tx_mseg_memcpy(pdst, loc, part, copy, olx);
+ tlen += copy;
+ if (likely(inlen <= tlen) || copy < part) {
+ es->inline_hdr_sz = rte_cpu_to_be_16(tlen);
+ pdst += copy;
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ pdst = (uint8_t *)txq->wqes;
+ part = inlen - tlen;
+ } while (true);
+}
+
+/**
+ * Build the Data Segment of pointer type.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dseg
+ * Pointer to WQE to fill with built Data Segment.
+ * @param buf
+ * Data buffer to point.
+ * @param len
+ * Data buffer length.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_dseg_ptr(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
+ uint8_t *buf,
+ unsigned int len,
+ unsigned int olx __rte_unused)
+
+{
+ MLX5_ASSERT(len);
+ dseg->bcount = rte_cpu_to_be_32(len);
+ dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
+ dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
+}
+
+/**
+ * Build the Data Segment of pointer type or inline if data length is less than
+ * buffer in minimal Data Segment size.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dseg
+ * Pointer to WQE to fill with built Data Segment.
+ * @param buf
+ * Data buffer to point.
+ * @param len
+ * Data buffer length.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ */
+static __rte_always_inline void
+mlx5_tx_dseg_iptr(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
+ uint8_t *buf,
+ unsigned int len,
+ unsigned int olx __rte_unused)
+
+{
+ uintptr_t dst, src;
+
+ MLX5_ASSERT(len);
+ if (len > MLX5_DSEG_MIN_INLINE_SIZE) {
+ dseg->bcount = rte_cpu_to_be_32(len);
+ dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
+ dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
+
+ return;
+ }
+ dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
+ /* Unrolled implementation of generic rte_memcpy. */
+ dst = (uintptr_t)&dseg->inline_data[0];
+ src = (uintptr_t)buf;
+ if (len & 0x08) {
+#ifdef RTE_ARCH_STRICT_ALIGN
+ MLX5_ASSERT(dst == RTE_PTR_ALIGN(dst, sizeof(uint32_t)));
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
+#else
+ *(uint64_t *)dst = *(unaligned_uint64_t *)src;
+ dst += sizeof(uint64_t);
+ src += sizeof(uint64_t);
+#endif
+ }
+ if (len & 0x04) {
+ *(uint32_t *)dst = *(unaligned_uint32_t *)src;
+ dst += sizeof(uint32_t);
+ src += sizeof(uint32_t);
+ }
+ if (len & 0x02) {
+ *(uint16_t *)dst = *(unaligned_uint16_t *)src;
+ dst += sizeof(uint16_t);
+ src += sizeof(uint16_t);
+ }
+ if (len & 0x01)
+ *(uint8_t *)dst = *(uint8_t *)src;
+}
+
+/**
+ * Build the Data Segment of inlined data from single
+ * segment packet, no VLAN insertion.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dseg
+ * Pointer to WQE to fill with built Data Segment.
+ * @param buf
+ * Data buffer to point.
+ * @param len
+ * Data buffer length.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Pointer to the next Data Segment after inlined data.
+ * Ring buffer wraparound check is needed. We do not do it here because it
+ * may not be needed for the last packet in the eMPW session.
+ */
+static __rte_always_inline struct mlx5_wqe_dseg *
+mlx5_tx_dseg_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc __rte_unused,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
+ uint8_t *buf,
+ unsigned int len,
+ unsigned int olx __rte_unused)
+{
+ unsigned int part;
+ uint8_t *pdst;
+
+ if (!MLX5_TXOFF_CONFIG(MPW)) {
+ /* Store the descriptor byte counter for eMPW sessions. */
+ dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
+ pdst = &dseg->inline_data[0];
+ } else {
+ /* The entire legacy MPW session counter is stored on close. */
+ pdst = (uint8_t *)dseg;
+ }
+ /*
+ * The WQEBB space availability is checked by caller.
+ * Here we should be aware of WQE ring buffer wraparound only.
+ */
+ part = (uint8_t *)txq->wqes_end - pdst;
+ part = RTE_MIN(part, len);
+ do {
+ rte_memcpy(pdst, buf, part);
+ len -= part;
+ if (likely(!len)) {
+ pdst += part;
+ if (!MLX5_TXOFF_CONFIG(MPW))
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ /* Note: no final wraparound check here. */
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ pdst = (uint8_t *)txq->wqes;
+ buf += part;
+ part = len;
+ } while (true);
+}
+
+/**
+ * Build the Data Segment of inlined data from single
+ * segment packet with VLAN insertion.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dseg
+ * Pointer to the dseg fill with built Data Segment.
+ * @param buf
+ * Data buffer to point.
+ * @param len
+ * Data buffer length.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Pointer to the next Data Segment after inlined data.
+ * Ring buffer wraparound check is needed.
+ */
+static __rte_always_inline struct mlx5_wqe_dseg *
+mlx5_tx_dseg_vlan(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc __rte_unused,
+ struct mlx5_wqe_dseg *__rte_restrict dseg,
+ uint8_t *buf,
+ unsigned int len,
+ unsigned int olx __rte_unused)
+
+{
+ unsigned int part;
+ uint8_t *pdst;
+
+ MLX5_ASSERT(len > MLX5_ESEG_MIN_INLINE_SIZE);
+ if (!MLX5_TXOFF_CONFIG(MPW)) {
+ /* Store the descriptor byte counter for eMPW sessions. */
+ dseg->bcount = rte_cpu_to_be_32
+ ((len + sizeof(struct rte_vlan_hdr)) |
+ MLX5_ETH_WQE_DATA_INLINE);
+ pdst = &dseg->inline_data[0];
+ } else {
+ /* The entire legacy MPW session counter is stored on close. */
+ pdst = (uint8_t *)dseg;
+ }
+ memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
+ buf += MLX5_DSEG_MIN_INLINE_SIZE;
+ pdst += MLX5_DSEG_MIN_INLINE_SIZE;
+ len -= MLX5_DSEG_MIN_INLINE_SIZE;
+ /* Insert VLAN ethertype + VLAN tag. Pointer is aligned. */
+ MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
+ if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
+ pdst = (uint8_t *)txq->wqes;
+ *(uint32_t *)pdst = rte_cpu_to_be_32((RTE_ETHER_TYPE_VLAN << 16) |
+ loc->mbuf->vlan_tci);
+ pdst += sizeof(struct rte_vlan_hdr);
+ /*
+ * The WQEBB space availability is checked by caller.
+ * Here we should be aware of WQE ring buffer wraparound only.
+ */
+ part = (uint8_t *)txq->wqes_end - pdst;
+ part = RTE_MIN(part, len);
+ do {
+ rte_memcpy(pdst, buf, part);
+ len -= part;
+ if (likely(!len)) {
+ pdst += part;
+ if (!MLX5_TXOFF_CONFIG(MPW))
+ pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
+ /* Note: no final wraparound check here. */
+ return (struct mlx5_wqe_dseg *)pdst;
+ }
+ pdst = (uint8_t *)txq->wqes;
+ buf += part;
+ part = len;
+ } while (true);
+}
+
+/**
+ * Build the Ethernet Segment with optionally inlined data with
+ * VLAN insertion and following Data Segments (if any) from
+ * multi-segment packet. Used by ordinary send and TSO.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param wqe
+ * Pointer to WQE to fill with built Ethernet/Data Segments.
+ * @param vlan
+ * Length of VLAN header to insert, 0 means no VLAN insertion.
+ * @param inlen
+ * Data length to inline. For TSO this parameter specifies exact value,
+ * for ordinary send routine can be aligned by caller to provide better WQE
+ * space saving and data buffer start address alignment.
+ * This length includes VLAN header being inserted.
+ * @param tso
+ * Zero means ordinary send, inlined data can be extended,
+ * otherwise this is TSO, inlined data length is fixed.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * Actual size of built WQE in segments.
+ */
+static __rte_always_inline unsigned int
+mlx5_tx_mseg_build(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ struct mlx5_wqe *__rte_restrict wqe,
+ unsigned int vlan,
+ unsigned int inlen,
+ unsigned int tso,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ unsigned int ds;
+
+ MLX5_ASSERT((rte_pktmbuf_pkt_len(loc->mbuf) + vlan) >= inlen);
+ loc->mbuf_nseg = NB_SEGS(loc->mbuf);
+ loc->mbuf_off = 0;
+
+ dseg = mlx5_tx_eseg_mdat(txq, loc, wqe, vlan, inlen, tso, olx);
+ if (!loc->mbuf_nseg)
+ goto dseg_done;
+ /*
+ * There are still some mbuf remaining, not inlined.
+ * The first mbuf may be partially inlined and we
+ * must process the possible non-zero data offset.
+ */
+ if (loc->mbuf_off) {
+ unsigned int dlen;
+ uint8_t *dptr;
+
+ /*
+ * Exhausted packets must be dropped before.
+ * Non-zero offset means there are some data
+ * remained in the packet.
+ */
+ MLX5_ASSERT(loc->mbuf_off < rte_pktmbuf_data_len(loc->mbuf));
+ MLX5_ASSERT(rte_pktmbuf_data_len(loc->mbuf));
+ dptr = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
+ loc->mbuf_off);
+ dlen = rte_pktmbuf_data_len(loc->mbuf) - loc->mbuf_off;
+ /*
+ * Build the pointer/minimal Data Segment.
+ * Do ring buffer wrapping check in advance.
+ */
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ mlx5_tx_dseg_iptr(txq, loc, dseg, dptr, dlen, olx);
+ /* Store the mbuf to be freed on completion. */
+ MLX5_ASSERT(loc->elts_free);
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ --loc->elts_free;
+ ++dseg;
+ if (--loc->mbuf_nseg == 0)
+ goto dseg_done;
+ loc->mbuf = loc->mbuf->next;
+ loc->mbuf_off = 0;
+ }
+ do {
+ if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
+ struct rte_mbuf *mbuf;
+
+ /* Zero length segment found, just skip. */
+ mbuf = loc->mbuf;
+ loc->mbuf = loc->mbuf->next;
+ rte_pktmbuf_free_seg(mbuf);
+ if (--loc->mbuf_nseg == 0)
+ break;
+ } else {
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ mlx5_tx_dseg_iptr
+ (txq, loc, dseg,
+ rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
+ rte_pktmbuf_data_len(loc->mbuf), olx);
+ MLX5_ASSERT(loc->elts_free);
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ --loc->elts_free;
+ ++dseg;
+ if (--loc->mbuf_nseg == 0)
+ break;
+ loc->mbuf = loc->mbuf->next;
+ }
+ } while (true);
+
+dseg_done:
+ /* Calculate actual segments used from the dseg pointer. */
+ if ((uintptr_t)wqe < (uintptr_t)dseg)
+ ds = ((uintptr_t)dseg - (uintptr_t)wqe) / MLX5_WSEG_SIZE;
+ else
+ ds = (((uintptr_t)dseg - (uintptr_t)wqe) +
+ txq->wqe_s * MLX5_WQE_SIZE) / MLX5_WSEG_SIZE;
+ return ds;
+}
+
+/**
+ * The routine checks timestamp flag in the current packet,
+ * and push WAIT WQE into the queue if scheduling is required.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_SINGLE - continue processing with the packet.
+ * MLX5_TXCMP_CODE_MULTI - the WAIT inserted, continue processing.
+ * Local context variables partially updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_schedule_send(struct mlx5_txq_data *restrict txq,
+ struct mlx5_txq_local *restrict loc,
+ unsigned int olx)
+{
+ if (MLX5_TXOFF_CONFIG(TXPP) &&
+ loc->mbuf->ol_flags & txq->ts_mask) {
+ struct mlx5_wqe *wqe;
+ uint64_t ts;
+ int32_t wci;
+
+ /*
+ * Estimate the required space quickly and roughly.
+ * We would like to ensure the packet can be pushed
+ * to the queue and we won't get the orphan WAIT WQE.
+ */
+ if (loc->wqe_free <= MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE ||
+ loc->elts_free < NB_SEGS(loc->mbuf))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Convert the timestamp into completion to wait. */
+ ts = *RTE_MBUF_DYNFIELD(loc->mbuf, txq->ts_offset, uint64_t *);
+ wci = mlx5_txpp_convert_tx_ts(txq->sh, ts);
+ if (unlikely(wci < 0))
+ return MLX5_TXCMP_CODE_SINGLE;
+ /* Build the WAIT WQE with specified completion. */
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ mlx5_tx_cseg_init(txq, loc, wqe, 2, MLX5_OPCODE_WAIT, olx);
+ mlx5_tx_wseg_init(txq, loc, wqe, wci, olx);
+ ++txq->wqe_ci;
+ --loc->wqe_free;
+ return MLX5_TXCMP_CODE_MULTI;
+ }
+ return MLX5_TXCMP_CODE_SINGLE;
+}
+
+/**
+ * Tx one packet function for multi-segment TSO. Supports all
+ * types of Tx offloads, uses MLX5_OPCODE_TSO to build WQEs,
+ * sends one packet per WQE.
+ *
+ * This routine is responsible for storing processed mbuf
+ * into elts ring buffer and update elts_head.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * Local context variables partially updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_packet_multi_tso(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ struct mlx5_wqe *__rte_restrict wqe;
+ unsigned int ds, dlen, inlen, ntcp, vlan = 0;
+
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * Calculate data length to be inlined to estimate
+ * the required space in WQE ring buffer.
+ */
+ dlen = rte_pktmbuf_pkt_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
+ vlan = sizeof(struct rte_vlan_hdr);
+ inlen = loc->mbuf->l2_len + vlan +
+ loc->mbuf->l3_len + loc->mbuf->l4_len;
+ if (unlikely((!inlen || !loc->mbuf->tso_segsz)))
+ return MLX5_TXCMP_CODE_ERROR;
+ if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
+ inlen += loc->mbuf->outer_l2_len + loc->mbuf->outer_l3_len;
+ /* Packet must contain all TSO headers. */
+ if (unlikely(inlen > MLX5_MAX_TSO_HEADER ||
+ inlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
+ inlen > (dlen + vlan)))
+ return MLX5_TXCMP_CODE_ERROR;
+ MLX5_ASSERT(inlen >= txq->inlen_mode);
+ /*
+ * Check whether there are enough free WQEBBs:
+ * - Control Segment
+ * - Ethernet Segment
+ * - First Segment of inlined Ethernet data
+ * - ... data continued ...
+ * - Data Segments of pointer/min inline type
+ */
+ ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WSEG_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Check for maximal WQE size. */
+ if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_ERROR;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes/packets counters. */
+ ntcp = (dlen - (inlen - vlan) + loc->mbuf->tso_segsz - 1) /
+ loc->mbuf->tso_segsz;
+ /*
+ * One will be added for mbuf itself at the end of the mlx5_tx_burst
+ * from loc->pkts_sent field.
+ */
+ --ntcp;
+ txq->stats.opackets += ntcp;
+ txq->stats.obytes += dlen + vlan + ntcp * inlen;
+#endif
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_TSO, olx);
+ ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 1, olx);
+ wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ return MLX5_TXCMP_CODE_MULTI;
+}
+
+/**
+ * Tx one packet function for multi-segment SEND. Supports all types of Tx
+ * offloads, uses MLX5_OPCODE_SEND to build WQEs, sends one packet per WQE,
+ * without any data inlining in Ethernet Segment.
+ *
+ * This routine is responsible for storing processed mbuf
+ * into elts ring buffer and update elts_head.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * Local context variables partially updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_packet_multi_send(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe *__rte_restrict wqe;
+ unsigned int ds, nseg;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * No inline at all, it means the CPU cycles saving is prioritized at
+ * configuration, we should not copy any packet data to WQE.
+ */
+ nseg = NB_SEGS(loc->mbuf);
+ ds = 2 + nseg;
+ if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Check for maximal WQE size. */
+ if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_ERROR;
+ /*
+ * Some Tx offloads may cause an error if packet is not long enough,
+ * check against assumed minimal length.
+ */
+ if (rte_pktmbuf_pkt_len(loc->mbuf) <= MLX5_ESEG_MIN_INLINE_SIZE)
+ return MLX5_TXCMP_CODE_ERROR;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += rte_pktmbuf_pkt_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
+ txq->stats.obytes += sizeof(struct rte_vlan_hdr);
+#endif
+ /*
+ * SEND WQE, one WQEBB:
+ * - Control Segment, SEND opcode
+ * - Ethernet Segment, optional VLAN, no inline
+ * - Data Segments, pointer only type
+ */
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, ds, MLX5_OPCODE_SEND, olx);
+ mlx5_tx_eseg_none(txq, loc, wqe, olx);
+ dseg = &wqe->dseg[0];
+ do {
+ if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
+ struct rte_mbuf *mbuf;
+
+ /*
+ * Zero length segment found, have to correct total
+ * size of WQE in segments.
+ * It is supposed to be rare occasion, so in normal
+ * case (no zero length segments) we avoid extra
+ * writing to the Control Segment.
+ */
+ --ds;
+ wqe->cseg.sq_ds -= RTE_BE32(1);
+ mbuf = loc->mbuf;
+ loc->mbuf = mbuf->next;
+ rte_pktmbuf_free_seg(mbuf);
+ if (--nseg == 0)
+ break;
+ } else {
+ mlx5_tx_dseg_ptr
+ (txq, loc, dseg,
+ rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
+ rte_pktmbuf_data_len(loc->mbuf), olx);
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ --loc->elts_free;
+ if (--nseg == 0)
+ break;
+ ++dseg;
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ loc->mbuf = loc->mbuf->next;
+ }
+ } while (true);
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ return MLX5_TXCMP_CODE_MULTI;
+}
+
+/**
+ * Tx one packet function for multi-segment SEND. Supports all
+ * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
+ * sends one packet per WQE, with data inlining in
+ * Ethernet Segment and minimal Data Segments.
+ *
+ * This routine is responsible for storing processed mbuf
+ * into elts ring buffer and update elts_head.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * Local context variables partially updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_packet_multi_inline(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ struct mlx5_wqe *__rte_restrict wqe;
+ unsigned int ds, inlen, dlen, vlan = 0;
+
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * First calculate data length to be inlined
+ * to estimate the required space for WQE.
+ */
+ dlen = rte_pktmbuf_pkt_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
+ vlan = sizeof(struct rte_vlan_hdr);
+ inlen = dlen + vlan;
+ /* Check against minimal length. */
+ if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
+ return MLX5_TXCMP_CODE_ERROR;
+ MLX5_ASSERT(txq->inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
+ if (inlen > txq->inlen_send ||
+ loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
+ struct rte_mbuf *mbuf;
+ unsigned int nxlen;
+ uintptr_t start;
+
+ /*
+ * Packet length exceeds the allowed inline data length,
+ * check whether the minimal inlining is required.
+ */
+ if (txq->inlen_mode) {
+ MLX5_ASSERT(txq->inlen_mode >=
+ MLX5_ESEG_MIN_INLINE_SIZE);
+ MLX5_ASSERT(txq->inlen_mode <= txq->inlen_send);
+ inlen = txq->inlen_mode;
+ } else {
+ if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE ||
+ !vlan || txq->vlan_en) {
+ /*
+ * VLAN insertion will be done inside by HW.
+ * It is not utmost effective - VLAN flag is
+ * checked twice, but we should proceed the
+ * inlining length correctly and take into
+ * account the VLAN header being inserted.
+ */
+ return mlx5_tx_packet_multi_send
+ (txq, loc, olx);
+ }
+ inlen = MLX5_ESEG_MIN_INLINE_SIZE;
+ }
+ /*
+ * Now we know the minimal amount of data is requested
+ * to inline. Check whether we should inline the buffers
+ * from the chain beginning to eliminate some mbufs.
+ */
+ mbuf = loc->mbuf;
+ nxlen = rte_pktmbuf_data_len(mbuf);
+ if (unlikely(nxlen <= txq->inlen_send)) {
+ /* We can inline first mbuf at least. */
+ if (nxlen < inlen) {
+ unsigned int smlen;
+
+ /* Scan mbufs till inlen filled. */
+ do {
+ smlen = nxlen;
+ mbuf = NEXT(mbuf);
+ MLX5_ASSERT(mbuf);
+ nxlen = rte_pktmbuf_data_len(mbuf);
+ nxlen += smlen;
+ } while (unlikely(nxlen < inlen));
+ if (unlikely(nxlen > txq->inlen_send)) {
+ /* We cannot inline entire mbuf. */
+ smlen = inlen - smlen;
+ start = rte_pktmbuf_mtod_offset
+ (mbuf, uintptr_t, smlen);
+ goto do_align;
+ }
+ }
+ do {
+ inlen = nxlen;
+ mbuf = NEXT(mbuf);
+ /* There should be not end of packet. */
+ MLX5_ASSERT(mbuf);
+ nxlen = inlen + rte_pktmbuf_data_len(mbuf);
+ } while (unlikely(nxlen < txq->inlen_send));
+ }
+ start = rte_pktmbuf_mtod(mbuf, uintptr_t);
+ /*
+ * Check whether we can do inline to align start
+ * address of data buffer to cacheline.
+ */
+do_align:
+ start = (~start + 1) & (RTE_CACHE_LINE_SIZE - 1);
+ if (unlikely(start)) {
+ start += inlen;
+ if (start <= txq->inlen_send)
+ inlen = start;
+ }
+ }
+ /*
+ * Check whether there are enough free WQEBBs:
+ * - Control Segment
+ * - Ethernet Segment
+ * - First Segment of inlined Ethernet data
+ * - ... data continued ...
+ * - Data Segments of pointer/min inline type
+ *
+ * Estimate the number of Data Segments conservatively,
+ * supposing no any mbufs is being freed during inlining.
+ */
+ MLX5_ASSERT(inlen <= txq->inlen_send);
+ ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WSEG_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Check for maximal WQE size. */
+ if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
+ return MLX5_TXCMP_CODE_ERROR;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes/packets counters. */
+ txq->stats.obytes += dlen + vlan;
+#endif
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_SEND, olx);
+ ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 0, olx);
+ wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ return MLX5_TXCMP_CODE_MULTI;
+}
+
+/**
+ * Tx burst function for multi-segment packets. Supports all
+ * types of Tx offloads, uses MLX5_OPCODE_SEND/TSO to build WQEs,
+ * sends one packet per WQE. Function stops sending if it
+ * encounters the single-segment packet.
+ *
+ * This routine is responsible for storing processed mbuf
+ * into elts ring buffer and update elts_head.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
+ * MLX5_TXCMP_CODE_TSO - TSO single-segment packet encountered.
+ * Local context variables updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_mseg(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ enum mlx5_txcmp_code ret;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
+ /*
+ * Estimate the number of free elts quickly but conservatively.
+ * Some segment may be fully inlined and freed,
+ * ignore this here - precise estimation is costly.
+ */
+ if (loc->elts_free < NB_SEGS(loc->mbuf))
+ return MLX5_TXCMP_CODE_EXIT;
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)) {
+ /* Proceed with multi-segment TSO. */
+ ret = mlx5_tx_packet_multi_tso(txq, loc, olx);
+ } else if (MLX5_TXOFF_CONFIG(INLINE)) {
+ /* Proceed with multi-segment SEND with inlining. */
+ ret = mlx5_tx_packet_multi_inline(txq, loc, olx);
+ } else {
+ /* Proceed with multi-segment SEND w/o inlining. */
+ ret = mlx5_tx_packet_multi_send(txq, loc, olx);
+ }
+ if (ret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (ret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ /* WQE is built, go to the next packet. */
+ ++loc->pkts_sent;
+ --pkts_n;
+ if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ loc->mbuf = *pkts++;
+ if (pkts_n > 1)
+ rte_prefetch0(*pkts);
+ if (likely(NB_SEGS(loc->mbuf) > 1))
+ continue;
+ /* Here ends the series of multi-segment packets. */
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
+ return MLX5_TXCMP_CODE_TSO;
+ return MLX5_TXCMP_CODE_SINGLE;
+ }
+ MLX5_ASSERT(false);
+}
+
+/**
+ * Tx burst function for single-segment packets with TSO.
+ * Supports all types of Tx offloads, except multi-packets.
+ * Uses MLX5_OPCODE_TSO to build WQEs, sends one packet per WQE.
+ * Function stops sending if it encounters the multi-segment
+ * packet or packet without TSO requested.
+ *
+ * The routine is responsible for storing processed mbuf into elts ring buffer
+ * and update elts_head if inline offloads is requested due to possible early
+ * freeing of the inlined mbufs (can not store pkts array in elts as a batch).
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
+ * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
+ * Local context variables updated.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_tso(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe *__rte_restrict wqe;
+ unsigned int ds, dlen, hlen, ntcp, vlan = 0;
+ uint8_t *dptr;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ dlen = rte_pktmbuf_data_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
+ vlan = sizeof(struct rte_vlan_hdr);
+ }
+ /*
+ * First calculate the WQE size to check
+ * whether we have enough space in ring buffer.
+ */
+ hlen = loc->mbuf->l2_len + vlan +
+ loc->mbuf->l3_len + loc->mbuf->l4_len;
+ if (unlikely((!hlen || !loc->mbuf->tso_segsz)))
+ return MLX5_TXCMP_CODE_ERROR;
+ if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
+ hlen += loc->mbuf->outer_l2_len +
+ loc->mbuf->outer_l3_len;
+ /* Segment must contain all TSO headers. */
+ if (unlikely(hlen > MLX5_MAX_TSO_HEADER ||
+ hlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
+ hlen > (dlen + vlan)))
+ return MLX5_TXCMP_CODE_ERROR;
+ /*
+ * Check whether there are enough free WQEBBs:
+ * - Control Segment
+ * - Ethernet Segment
+ * - First Segment of inlined Ethernet data
+ * - ... data continued ...
+ * - Finishing Data Segment of pointer type
+ */
+ ds = 4 + (hlen - MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ if (loc->wqe_free < ((ds + 3) / 4))
+ return MLX5_TXCMP_CODE_EXIT;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes/packets counters. */
+ ntcp = (dlen + vlan - hlen +
+ loc->mbuf->tso_segsz - 1) /
+ loc->mbuf->tso_segsz;
+ /*
+ * One will be added for mbuf itself at the end
+ * of the mlx5_tx_burst from loc->pkts_sent field.
+ */
+ --ntcp;
+ txq->stats.opackets += ntcp;
+ txq->stats.obytes += dlen + vlan + ntcp * hlen;
+#endif
+ /*
+ * Build the TSO WQE:
+ * - Control Segment
+ * - Ethernet Segment with hlen bytes inlined
+ * - Data Segment of pointer type
+ */
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, ds,
+ MLX5_OPCODE_TSO, olx);
+ dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan, hlen, 1, olx);
+ dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) + hlen - vlan;
+ dlen -= hlen - vlan;
+ mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
+ /*
+ * WQE is built, update the loop parameters
+ * and go to the next packet.
+ */
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ if (MLX5_TXOFF_CONFIG(INLINE))
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ --loc->elts_free;
+ ++loc->pkts_sent;
+ --pkts_n;
+ if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ loc->mbuf = *pkts++;
+ if (pkts_n > 1)
+ rte_prefetch0(*pkts);
+ if (MLX5_TXOFF_CONFIG(MULTI) &&
+ unlikely(NB_SEGS(loc->mbuf) > 1))
+ return MLX5_TXCMP_CODE_MULTI;
+ if (likely(!(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)))
+ return MLX5_TXCMP_CODE_SINGLE;
+ /* Continue with the next TSO packet. */
+ }
+ MLX5_ASSERT(false);
+}
+
+/**
+ * Analyze the packet and select the best method to send.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ * @param newp
+ * The predefined flag whether do complete check for
+ * multi-segment packets and TSO.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
+ * MLX5_TXCMP_CODE_TSO - TSO required, use TSO/LSO.
+ * MLX5_TXCMP_CODE_SINGLE - single-segment packet, use SEND.
+ * MLX5_TXCMP_CODE_EMPW - single-segment packet, use MPW.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_able_to_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx,
+ bool newp)
+{
+ /* Check for multi-segment packet. */
+ if (newp &&
+ MLX5_TXOFF_CONFIG(MULTI) &&
+ unlikely(NB_SEGS(loc->mbuf) > 1))
+ return MLX5_TXCMP_CODE_MULTI;
+ /* Check for TSO packet. */
+ if (newp &&
+ MLX5_TXOFF_CONFIG(TSO) &&
+ unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
+ return MLX5_TXCMP_CODE_TSO;
+ /* Check if eMPW is enabled at all. */
+ if (!MLX5_TXOFF_CONFIG(EMPW))
+ return MLX5_TXCMP_CODE_SINGLE;
+ /* Check if eMPW can be engaged. */
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ unlikely(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) &&
+ (!MLX5_TXOFF_CONFIG(INLINE) ||
+ unlikely((rte_pktmbuf_data_len(loc->mbuf) +
+ sizeof(struct rte_vlan_hdr)) > txq->inlen_empw))) {
+ /*
+ * eMPW does not support VLAN insertion offload, we have to
+ * inline the entire packet but packet is too long for inlining.
+ */
+ return MLX5_TXCMP_CODE_SINGLE;
+ }
+ return MLX5_TXCMP_CODE_EMPW;
+}
+
+/**
+ * Check the next packet attributes to match with the eMPW batch ones.
+ * In addition, for legacy MPW the packet length is checked either.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param es
+ * Pointer to Ethernet Segment of eMPW batch.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param dlen
+ * Length of previous packet in MPW descriptor.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * true - packet match with eMPW batch attributes.
+ * false - no match, eMPW should be restarted.
+ */
+static __rte_always_inline bool
+mlx5_tx_match_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_wqe_eseg *__rte_restrict es,
+ struct mlx5_txq_local *__rte_restrict loc,
+ uint32_t dlen,
+ unsigned int olx)
+{
+ uint8_t swp_flags = 0;
+
+ /* Compare the checksum flags, if any. */
+ if (MLX5_TXOFF_CONFIG(CSUM) &&
+ txq_ol_cksum_to_cs(loc->mbuf) != es->cs_flags)
+ return false;
+ /* Compare the Software Parser offsets and flags. */
+ if (MLX5_TXOFF_CONFIG(SWP) &&
+ (es->swp_offs != txq_mbuf_to_swp(loc, &swp_flags, olx) ||
+ es->swp_flags != swp_flags))
+ return false;
+ /* Fill metadata field if needed. */
+ if (MLX5_TXOFF_CONFIG(METADATA) &&
+ es->metadata != (loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
+ *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0))
+ return false;
+ /* Legacy MPW can send packets with the same length only. */
+ if (MLX5_TXOFF_CONFIG(MPW) &&
+ dlen != rte_pktmbuf_data_len(loc->mbuf))
+ return false;
+ /* There must be no VLAN packets in eMPW loop. */
+ if (MLX5_TXOFF_CONFIG(VLAN))
+ MLX5_ASSERT(!(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT));
+ /* Check if the scheduling is requested. */
+ if (MLX5_TXOFF_CONFIG(TXPP) &&
+ loc->mbuf->ol_flags & txq->ts_mask)
+ return false;
+ return true;
+}
+
+/**
+ * Update send loop variables and WQE for eMPW loop without data inlining.
+ * Number of Data Segments is equal to the number of sent packets.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param ds
+ * Number of packets/Data Segments/Packets.
+ * @param slen
+ * Accumulated statistics, bytes sent.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * true - packet match with eMPW batch attributes.
+ * false - no match, eMPW should be restarted.
+ */
+static __rte_always_inline void
+mlx5_tx_sdone_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int ds,
+ unsigned int slen,
+ unsigned int olx __rte_unused)
+{
+ MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += slen;
+#else
+ (void)slen;
+#endif
+ loc->elts_free -= ds;
+ loc->pkts_sent += ds;
+ ds += 2;
+ loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+}
+
+/**
+ * Update send loop variables and WQE for eMPW loop with data inlining.
+ * Gets the size of pushed descriptors and data to the WQE.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param len
+ * Total size of descriptor/data in bytes.
+ * @param slen
+ * Accumulated statistics, data bytes sent.
+ * @param wqem
+ * The base WQE for the eMPW/MPW descriptor.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * true - packet match with eMPW batch attributes.
+ * false - no match, eMPW should be restarted.
+ */
+static __rte_always_inline void
+mlx5_tx_idone_empw(struct mlx5_txq_data *__rte_restrict txq,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int len,
+ unsigned int slen,
+ struct mlx5_wqe *__rte_restrict wqem,
+ unsigned int olx __rte_unused)
+{
+ struct mlx5_wqe_dseg *dseg = &wqem->dseg[0];
+
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += slen;
+#else
+ (void)slen;
+#endif
+ if (MLX5_TXOFF_CONFIG(MPW) && dseg->bcount == RTE_BE32(0)) {
+ /*
+ * If the legacy MPW session contains the inline packets
+ * we should set the only inline data segment length
+ * and align the total length to the segment size.
+ */
+ MLX5_ASSERT(len > sizeof(dseg->bcount));
+ dseg->bcount = rte_cpu_to_be_32((len - sizeof(dseg->bcount)) |
+ MLX5_ETH_WQE_DATA_INLINE);
+ len = (len + MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE + 2;
+ } else {
+ /*
+ * The session is not legacy MPW or contains the
+ * data buffer pointer segments.
+ */
+ MLX5_ASSERT((len % MLX5_WSEG_SIZE) == 0);
+ len = len / MLX5_WSEG_SIZE + 2;
+ }
+ wqem->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
+ txq->wqe_ci += (len + 3) / 4;
+ loc->wqe_free -= (len + 3) / 4;
+ loc->wqe_last = wqem;
+}
+
+/**
+ * The set of Tx burst functions for single-segment packets without TSO
+ * and with Multi-Packet Writing feature support.
+ * Supports all types of Tx offloads, except multi-packets and TSO.
+ *
+ * Uses MLX5_OPCODE_EMPW to build WQEs if possible and sends as many packet
+ * per WQE as it can. If eMPW is not configured or packet can not be sent with
+ * eMPW (VLAN insertion) the ordinary SEND opcode is used and only one packet
+ * placed in WQE.
+ *
+ * Functions stop sending if it encounters the multi-segment packet or packet
+ * with TSO requested.
+ *
+ * The routines are responsible for storing processed mbuf into elts ring buffer
+ * and update elts_head if inlining offload is requested. Otherwise the copying
+ * mbufs to elts can be postponed and completed at the end of burst routine.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ * @param loc
+ * Pointer to burst routine local context.
+ * @param olx
+ * Configured Tx offloads mask. It is fully defined at
+ * compile time and may be used for optimization.
+ *
+ * @return
+ * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
+ * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
+ * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
+ * MLX5_TXCMP_CODE_TSO - TSO packet encountered.
+ * MLX5_TXCMP_CODE_SINGLE - used inside functions set.
+ * MLX5_TXCMP_CODE_EMPW - used inside functions set.
+ *
+ * Local context variables updated.
+ *
+ *
+ * The routine sends packets with MLX5_OPCODE_EMPW
+ * without inlining, this is dedicated optimized branch.
+ * No VLAN insertion is supported.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_empw_simple(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ /*
+ * Subroutine is the part of mlx5_tx_burst_single() and sends
+ * single-segment packet with eMPW opcode without data inlining.
+ */
+ MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe_eseg *__rte_restrict eseg;
+ enum mlx5_txcmp_code ret;
+ unsigned int part, loop;
+ unsigned int slen = 0;
+
+next_empw:
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
+ MLX5_MPW_MAX_PACKETS :
+ MLX5_EMPW_MAX_PACKETS);
+ if (unlikely(loc->elts_free < part)) {
+ /* We have no enough elts to save all mbufs. */
+ if (unlikely(loc->elts_free < MLX5_EMPW_MIN_PACKETS))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* But we still able to send at least minimal eMPW. */
+ part = loc->elts_free;
+ }
+ /* Check whether we have enough WQEs */
+ if (unlikely(loc->wqe_free < ((2 + part + 3) / 4))) {
+ if (unlikely(loc->wqe_free <
+ ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ part = (loc->wqe_free * 4) - 2;
+ }
+ if (likely(part > 1))
+ rte_prefetch0(*pkts);
+ loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ /*
+ * Build eMPW title WQEBB:
+ * - Control Segment, eMPW opcode
+ * - Ethernet Segment, no inline
+ */
+ mlx5_tx_cseg_init(txq, loc, loc->wqe_last, part + 2,
+ MLX5_OPCODE_ENHANCED_MPSW, olx);
+ mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
+ olx & ~MLX5_TXOFF_CONFIG_VLAN);
+ eseg = &loc->wqe_last->eseg;
+ dseg = &loc->wqe_last->dseg[0];
+ loop = part;
+ /* Store the packet length for legacy MPW. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ eseg->mss = rte_cpu_to_be_16
+ (rte_pktmbuf_data_len(loc->mbuf));
+ for (;;) {
+ uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ slen += dlen;
+#endif
+ mlx5_tx_dseg_ptr
+ (txq, loc, dseg,
+ rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
+ dlen, olx);
+ if (unlikely(--loop == 0))
+ break;
+ loc->mbuf = *pkts++;
+ if (likely(loop > 1))
+ rte_prefetch0(*pkts);
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
+ /*
+ * Unroll the completion code to avoid
+ * returning variable value - it results in
+ * unoptimized sequent checking in caller.
+ */
+ if (ret == MLX5_TXCMP_CODE_MULTI) {
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_MULTI;
+ }
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (ret == MLX5_TXCMP_CODE_TSO) {
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_TSO;
+ }
+ if (ret == MLX5_TXCMP_CODE_SINGLE) {
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_SINGLE;
+ }
+ if (ret != MLX5_TXCMP_CODE_EMPW) {
+ MLX5_ASSERT(false);
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * Check whether packet parameters coincide
+ * within assumed eMPW batch:
+ * - check sum settings
+ * - metadata value
+ * - software parser settings
+ * - packets length (legacy MPW only)
+ * - scheduling is not required
+ */
+ if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
+ MLX5_ASSERT(loop);
+ part -= loop;
+ mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ pkts_n -= part;
+ goto next_empw;
+ }
+ /* Packet attributes match, continue the same eMPW. */
+ ++dseg;
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ }
+ /* eMPW is built successfully, update loop parameters. */
+ MLX5_ASSERT(!loop);
+ MLX5_ASSERT(pkts_n >= part);
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += slen;
+#endif
+ loc->elts_free -= part;
+ loc->pkts_sent += part;
+ txq->wqe_ci += (2 + part + 3) / 4;
+ loc->wqe_free -= (2 + part + 3) / 4;
+ pkts_n -= part;
+ if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ loc->mbuf = *pkts++;
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
+ if (unlikely(ret != MLX5_TXCMP_CODE_EMPW))
+ return ret;
+ /* Continue sending eMPW batches. */
+ }
+ MLX5_ASSERT(false);
+}
+
+/**
+ * The routine sends packets with MLX5_OPCODE_EMPW
+ * with inlining, optionally supports VLAN insertion.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_empw_inline(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ /*
+ * Subroutine is the part of mlx5_tx_burst_single() and sends
+ * single-segment packet with eMPW opcode with data inlining.
+ */
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ struct mlx5_wqe *__rte_restrict wqem;
+ enum mlx5_txcmp_code ret;
+ unsigned int room, part, nlim;
+ unsigned int slen = 0;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /*
+ * Limits the amount of packets in one WQE
+ * to improve CQE latency generation.
+ */
+ nlim = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
+ MLX5_MPW_INLINE_MAX_PACKETS :
+ MLX5_EMPW_MAX_PACKETS);
+ /* Check whether we have minimal amount WQEs */
+ if (unlikely(loc->wqe_free <
+ ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
+ return MLX5_TXCMP_CODE_EXIT;
+ if (likely(pkts_n > 1))
+ rte_prefetch0(*pkts);
+ wqem = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ /*
+ * Build eMPW title WQEBB:
+ * - Control Segment, eMPW opcode, zero DS
+ * - Ethernet Segment, no inline
+ */
+ mlx5_tx_cseg_init(txq, loc, wqem, 0,
+ MLX5_OPCODE_ENHANCED_MPSW, olx);
+ mlx5_tx_eseg_none(txq, loc, wqem,
+ olx & ~MLX5_TXOFF_CONFIG_VLAN);
+ dseg = &wqem->dseg[0];
+ /* Store the packet length for legacy MPW. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ wqem->eseg.mss = rte_cpu_to_be_16
+ (rte_pktmbuf_data_len(loc->mbuf));
+ room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
+ loc->wqe_free) * MLX5_WQE_SIZE -
+ MLX5_WQE_CSEG_SIZE -
+ MLX5_WQE_ESEG_SIZE;
+ /* Limit the room for legacy MPW sessions for performance. */
+ if (MLX5_TXOFF_CONFIG(MPW))
+ room = RTE_MIN(room,
+ RTE_MAX(txq->inlen_empw +
+ sizeof(dseg->bcount) +
+ (MLX5_TXOFF_CONFIG(VLAN) ?
+ sizeof(struct rte_vlan_hdr) : 0),
+ MLX5_MPW_INLINE_MAX_PACKETS *
+ MLX5_WQE_DSEG_SIZE));
+ /* Build WQE till we have space, packets and resources. */
+ part = room;
+ for (;;) {
+ uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
+ uint8_t *dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
+ unsigned int tlen;
+
+ MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
+ MLX5_ASSERT((room % MLX5_WQE_DSEG_SIZE) == 0);
+ MLX5_ASSERT((uintptr_t)dseg < (uintptr_t)txq->wqes_end);
+ /*
+ * Some Tx offloads may cause an error if packet is not
+ * long enough, check against assumed minimal length.
+ */
+ if (unlikely(dlen <= MLX5_ESEG_MIN_INLINE_SIZE)) {
+ part -= room;
+ if (unlikely(!part))
+ return MLX5_TXCMP_CODE_ERROR;
+ /*
+ * We have some successfully built
+ * packet Data Segments to send.
+ */
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /* Inline or not inline - that's the Question. */
+ if (dlen > txq->inlen_empw ||
+ loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE)
+ goto pointer_empw;
+ if (MLX5_TXOFF_CONFIG(MPW)) {
+ if (dlen > txq->inlen_send)
+ goto pointer_empw;
+ tlen = dlen;
+ if (part == room) {
+ /* Open new inline MPW session. */
+ tlen += sizeof(dseg->bcount);
+ dseg->bcount = RTE_BE32(0);
+ dseg = RTE_PTR_ADD
+ (dseg, sizeof(dseg->bcount));
+ } else {
+ /*
+ * No pointer and inline descriptor
+ * intermix for legacy MPW sessions.
+ */
+ if (wqem->dseg[0].bcount)
+ break;
+ }
+ } else {
+ tlen = sizeof(dseg->bcount) + dlen;
+ }
+ /* Inline entire packet, optional VLAN insertion. */
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
+ /*
+ * The packet length must be checked in
+ * mlx5_tx_able_to_empw() and packet
+ * fits into inline length guaranteed.
+ */
+ MLX5_ASSERT((dlen +
+ sizeof(struct rte_vlan_hdr)) <=
+ txq->inlen_empw);
+ tlen += sizeof(struct rte_vlan_hdr);
+ if (room < tlen)
+ break;
+ dseg = mlx5_tx_dseg_vlan(txq, loc, dseg,
+ dptr, dlen, olx);
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ slen += sizeof(struct rte_vlan_hdr);
+#endif
+ } else {
+ if (room < tlen)
+ break;
+ dseg = mlx5_tx_dseg_empw(txq, loc, dseg,
+ dptr, dlen, olx);
+ }
+ if (!MLX5_TXOFF_CONFIG(MPW))
+ tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
+ MLX5_ASSERT(room >= tlen);
+ room -= tlen;
+ /*
+ * Packet data are completely inline,
+ * we can try to free the packet.
+ */
+ if (likely(loc->pkts_sent == loc->mbuf_free)) {
+ /*
+ * All the packets from the burst beginning
+ * are inline, we can free mbufs directly
+ * from the origin array on tx_burst exit().
+ */
+ loc->mbuf_free++;
+ goto next_mbuf;
+ }
+ /*
+ * In order no to call rte_pktmbuf_free_seg() here,
+ * in the most inner loop (that might be very
+ * expensive) we just save the mbuf in elts.
+ */
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ loc->elts_free--;
+ goto next_mbuf;
+pointer_empw:
+ /*
+ * No pointer and inline descriptor
+ * intermix for legacy MPW sessions.
+ */
+ if (MLX5_TXOFF_CONFIG(MPW) &&
+ part != room &&
+ wqem->dseg[0].bcount == RTE_BE32(0))
+ break;
+ /*
+ * Not inlinable VLAN packets are
+ * proceeded outside of this routine.
+ */
+ MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
+ if (MLX5_TXOFF_CONFIG(VLAN))
+ MLX5_ASSERT(!(loc->mbuf->ol_flags &
+ PKT_TX_VLAN_PKT));
+ mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
+ /* We have to store mbuf in elts.*/
+ txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
+ loc->elts_free--;
+ room -= MLX5_WQE_DSEG_SIZE;
+ /* Ring buffer wraparound is checked at the loop end.*/
+ ++dseg;
+next_mbuf:
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ slen += dlen;
+#endif
+ loc->pkts_sent++;
+ pkts_n--;
+ if (unlikely(!pkts_n || !loc->elts_free)) {
+ /*
+ * We have no resources/packets to
+ * continue build descriptors.
+ */
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ return MLX5_TXCMP_CODE_EXIT;
+ }
+ loc->mbuf = *pkts++;
+ if (likely(pkts_n > 1))
+ rte_prefetch0(*pkts);
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
+ /*
+ * Unroll the completion code to avoid
+ * returning variable value - it results in
+ * unoptimized sequent checking in caller.
+ */
+ if (ret == MLX5_TXCMP_CODE_MULTI) {
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_MULTI;
+ }
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (ret == MLX5_TXCMP_CODE_TSO) {
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_TSO;
+ }
+ if (ret == MLX5_TXCMP_CODE_SINGLE) {
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ return MLX5_TXCMP_CODE_SINGLE;
+ }
+ if (ret != MLX5_TXCMP_CODE_EMPW) {
+ MLX5_ASSERT(false);
+ part -= room;
+ mlx5_tx_idone_empw(txq, loc, part,
+ slen, wqem, olx);
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ /* Check if we have minimal room left. */
+ nlim--;
+ if (unlikely(!nlim || room < MLX5_WQE_DSEG_SIZE))
+ break;
+ /*
+ * Check whether packet parameters coincide
+ * within assumed eMPW batch:
+ * - check sum settings
+ * - metadata value
+ * - software parser settings
+ * - packets length (legacy MPW only)
+ * - scheduling is not required
+ */
+ if (!mlx5_tx_match_empw(txq, &wqem->eseg,
+ loc, dlen, olx))
+ break;
+ /* Packet attributes match, continue the same eMPW. */
+ if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
+ dseg = (struct mlx5_wqe_dseg *)txq->wqes;
+ }
+ /*
+ * We get here to close an existing eMPW
+ * session and start the new one.
+ */
+ MLX5_ASSERT(pkts_n);
+ part -= room;
+ if (unlikely(!part))
+ return MLX5_TXCMP_CODE_EXIT;
+ mlx5_tx_idone_empw(txq, loc, part, slen, wqem, olx);
+ if (unlikely(!loc->elts_free ||
+ !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ /* Continue the loop with new eMPW session. */
+ }
+ MLX5_ASSERT(false);
+}
+
+/**
+ * The routine sends packets with ordinary MLX5_OPCODE_SEND.
+ * Data inlining and VLAN insertion are supported.
+ */
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_single_send(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ /*
+ * Subroutine is the part of mlx5_tx_burst_single()
+ * and sends single-segment packet with SEND opcode.
+ */
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ MLX5_ASSERT(pkts_n > loc->pkts_sent);
+ pkts += loc->pkts_sent + 1;
+ pkts_n -= loc->pkts_sent;
+ for (;;) {
+ struct mlx5_wqe *__rte_restrict wqe;
+ enum mlx5_txcmp_code ret;
+
+ MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
+ if (MLX5_TXOFF_CONFIG(TXPP)) {
+ enum mlx5_txcmp_code wret;
+
+ /* Generate WAIT for scheduling if requested. */
+ wret = mlx5_tx_schedule_send(txq, loc, olx);
+ if (wret == MLX5_TXCMP_CODE_EXIT)
+ return MLX5_TXCMP_CODE_EXIT;
+ if (wret == MLX5_TXCMP_CODE_ERROR)
+ return MLX5_TXCMP_CODE_ERROR;
+ }
+ if (MLX5_TXOFF_CONFIG(INLINE)) {
+ unsigned int inlen, vlan = 0;
+
+ inlen = rte_pktmbuf_data_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
+ vlan = sizeof(struct rte_vlan_hdr);
+ inlen += vlan;
+ }
+ /*
+ * If inlining is enabled at configuration time
+ * the limit must be not less than minimal size.
+ * Otherwise we would do extra check for data
+ * size to avoid crashes due to length overflow.
+ */
+ MLX5_ASSERT(txq->inlen_send >=
+ MLX5_ESEG_MIN_INLINE_SIZE);
+ if (inlen <= txq->inlen_send) {
+ unsigned int seg_n, wqe_n;
+
+ rte_prefetch0(rte_pktmbuf_mtod
+ (loc->mbuf, uint8_t *));
+ /* Check against minimal length. */
+ if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
+ return MLX5_TXCMP_CODE_ERROR;
+ if (loc->mbuf->ol_flags &
+ PKT_TX_DYNF_NOINLINE) {
+ /*
+ * The hint flag not to inline packet
+ * data is set. Check whether we can
+ * follow the hint.
+ */
+ if ((!MLX5_TXOFF_CONFIG(EMPW) &&
+ txq->inlen_mode) ||
+ (MLX5_TXOFF_CONFIG(MPW) &&
+ txq->inlen_mode)) {
+ if (inlen <= txq->inlen_send)
+ goto single_inline;
+ /*
+ * The hardware requires the
+ * minimal inline data header.
+ */
+ goto single_min_inline;
+ }
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ vlan && !txq->vlan_en) {
+ /*
+ * We must insert VLAN tag
+ * by software means.
+ */
+ goto single_part_inline;
+ }
+ goto single_no_inline;
+ }
+single_inline:
+ /*
+ * Completely inlined packet data WQE:
+ * - Control Segment, SEND opcode
+ * - Ethernet Segment, no VLAN insertion
+ * - Data inlined, VLAN optionally inserted
+ * - Alignment to MLX5_WSEG_SIZE
+ * Have to estimate amount of WQEBBs
+ */
+ seg_n = (inlen + 3 * MLX5_WSEG_SIZE -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ /* Check if there are enough WQEBBs. */
+ wqe_n = (seg_n + 3) / 4;
+ if (wqe_n > loc->wqe_free)
+ return MLX5_TXCMP_CODE_EXIT;
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, seg_n,
+ MLX5_OPCODE_SEND, olx);
+ mlx5_tx_eseg_data(txq, loc, wqe,
+ vlan, inlen, 0, olx);
+ txq->wqe_ci += wqe_n;
+ loc->wqe_free -= wqe_n;
+ /*
+ * Packet data are completely inlined,
+ * free the packet immediately.
+ */
+ rte_pktmbuf_free_seg(loc->mbuf);
+ } else if ((!MLX5_TXOFF_CONFIG(EMPW) ||
+ MLX5_TXOFF_CONFIG(MPW)) &&
+ txq->inlen_mode) {
+ /*
+ * If minimal inlining is requested the eMPW
+ * feature should be disabled due to data is
+ * inlined into Ethernet Segment, which can
+ * not contain inlined data for eMPW due to
+ * segment shared for all packets.
+ */
+ struct mlx5_wqe_dseg *__rte_restrict dseg;
+ unsigned int ds;
+ uint8_t *dptr;
+
+ /*
+ * The inline-mode settings require
+ * to inline the specified amount of
+ * data bytes to the Ethernet Segment.
+ * We should check the free space in
+ * WQE ring buffer to inline partially.
+ */
+single_min_inline:
+ MLX5_ASSERT(txq->inlen_send >= txq->inlen_mode);
+ MLX5_ASSERT(inlen > txq->inlen_mode);
+ MLX5_ASSERT(txq->inlen_mode >=
+ MLX5_ESEG_MIN_INLINE_SIZE);
+ /*
+ * Check whether there are enough free WQEBBs:
+ * - Control Segment
+ * - Ethernet Segment
+ * - First Segment of inlined Ethernet data
+ * - ... data continued ...
+ * - Finishing Data Segment of pointer type
+ */
+ ds = (MLX5_WQE_CSEG_SIZE +
+ MLX5_WQE_ESEG_SIZE +
+ MLX5_WQE_DSEG_SIZE +
+ txq->inlen_mode -
+ MLX5_ESEG_MIN_INLINE_SIZE +
+ MLX5_WQE_DSEG_SIZE +
+ MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
+ if (loc->wqe_free < ((ds + 3) / 4))
+ return MLX5_TXCMP_CODE_EXIT;
+ /*
+ * Build the ordinary SEND WQE:
+ * - Control Segment
+ * - Ethernet Segment, inline inlen_mode bytes
+ * - Data Segment of pointer type
+ */
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, ds,
+ MLX5_OPCODE_SEND, olx);
+ dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan,
+ txq->inlen_mode,
+ 0, olx);
+ dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
+ txq->inlen_mode - vlan;
+ inlen -= txq->inlen_mode;
+ mlx5_tx_dseg_ptr(txq, loc, dseg,
+ dptr, inlen, olx);
+ /*
+ * WQE is built, update the loop parameters
+ * and got to the next packet.
+ */
+ txq->wqe_ci += (ds + 3) / 4;
+ loc->wqe_free -= (ds + 3) / 4;
+ /* We have to store mbuf in elts.*/
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+ txq->elts[txq->elts_head++ & txq->elts_m] =
+ loc->mbuf;
+ --loc->elts_free;
+ } else {
+ uint8_t *dptr;
+ unsigned int dlen;
+
+ /*
+ * Partially inlined packet data WQE, we have
+ * some space in title WQEBB, we can fill it
+ * with some packet data. It takes one WQEBB,
+ * it is available, no extra space check:
+ * - Control Segment, SEND opcode
+ * - Ethernet Segment, no VLAN insertion
+ * - MLX5_ESEG_MIN_INLINE_SIZE bytes of Data
+ * - Data Segment, pointer type
+ *
+ * We also get here if VLAN insertion is not
+ * supported by HW, the inline is enabled.
+ */
+single_part_inline:
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, 4,
+ MLX5_OPCODE_SEND, olx);
+ mlx5_tx_eseg_dmin(txq, loc, wqe, vlan, olx);
+ dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
+ MLX5_ESEG_MIN_INLINE_SIZE - vlan;
+ /*
+ * The length check is performed above, by
+ * comparing with txq->inlen_send. We should
+ * not get overflow here.
+ */
+ MLX5_ASSERT(inlen > MLX5_ESEG_MIN_INLINE_SIZE);
+ dlen = inlen - MLX5_ESEG_MIN_INLINE_SIZE;
+ mlx5_tx_dseg_ptr(txq, loc, &wqe->dseg[1],
+ dptr, dlen, olx);
+ ++txq->wqe_ci;
+ --loc->wqe_free;
+ /* We have to store mbuf in elts.*/
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
+ txq->elts[txq->elts_head++ & txq->elts_m] =
+ loc->mbuf;
+ --loc->elts_free;
+ }
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += vlan +
+ rte_pktmbuf_data_len(loc->mbuf);
+#endif
+ } else {
+ /*
+ * No inline at all, it means the CPU cycles saving
+ * is prioritized at configuration, we should not
+ * copy any packet data to WQE.
+ *
+ * SEND WQE, one WQEBB:
+ * - Control Segment, SEND opcode
+ * - Ethernet Segment, optional VLAN, no inline
+ * - Data Segment, pointer type
+ */
+single_no_inline:
+ wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
+ loc->wqe_last = wqe;
+ mlx5_tx_cseg_init(txq, loc, wqe, 3,
+ MLX5_OPCODE_SEND, olx);
+ mlx5_tx_eseg_none(txq, loc, wqe, olx);
+ mlx5_tx_dseg_ptr
+ (txq, loc, &wqe->dseg[0],
+ rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
+ rte_pktmbuf_data_len(loc->mbuf), olx);
+ ++txq->wqe_ci;
+ --loc->wqe_free;
+ /*
+ * We should not store mbuf pointer in elts
+ * if no inlining is configured, this is done
+ * by calling routine in a batch copy.
+ */
+ MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
+ --loc->elts_free;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Update sent data bytes counter. */
+ txq->stats.obytes += rte_pktmbuf_data_len(loc->mbuf);
+ if (MLX5_TXOFF_CONFIG(VLAN) &&
+ loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
+ txq->stats.obytes +=
+ sizeof(struct rte_vlan_hdr);
+#endif
+ }
+ ++loc->pkts_sent;
+ --pkts_n;
+ if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
+ return MLX5_TXCMP_CODE_EXIT;
+ loc->mbuf = *pkts++;
+ if (pkts_n > 1)
+ rte_prefetch0(*pkts);
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
+ if (unlikely(ret != MLX5_TXCMP_CODE_SINGLE))
+ return ret;
+ }
+ MLX5_ASSERT(false);
+}
+
+static __rte_always_inline enum mlx5_txcmp_code
+mlx5_tx_burst_single(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ unsigned int pkts_n,
+ struct mlx5_txq_local *__rte_restrict loc,
+ unsigned int olx)
+{
+ enum mlx5_txcmp_code ret;
+
+ ret = mlx5_tx_able_to_empw(txq, loc, olx, false);
+ if (ret == MLX5_TXCMP_CODE_SINGLE)
+ goto ordinary_send;
+ MLX5_ASSERT(ret == MLX5_TXCMP_CODE_EMPW);
+ for (;;) {
+ /* Optimize for inline/no inline eMPW send. */
+ ret = (MLX5_TXOFF_CONFIG(INLINE)) ?
+ mlx5_tx_burst_empw_inline
+ (txq, pkts, pkts_n, loc, olx) :
+ mlx5_tx_burst_empw_simple
+ (txq, pkts, pkts_n, loc, olx);
+ if (ret != MLX5_TXCMP_CODE_SINGLE)
+ return ret;
+ /* The resources to send one packet should remain. */
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ordinary_send:
+ ret = mlx5_tx_burst_single_send(txq, pkts, pkts_n, loc, olx);
+ MLX5_ASSERT(ret != MLX5_TXCMP_CODE_SINGLE);
+ if (ret != MLX5_TXCMP_CODE_EMPW)
+ return ret;
+ /* The resources to send one packet should remain. */
+ MLX5_ASSERT(loc->elts_free && loc->wqe_free);
+ }
+}
+
+/**
+ * DPDK Tx callback template. This is configured template used to generate
+ * routines optimized for specified offload setup.
+ * One of this generated functions is chosen at SQ configuration time.
+ *
+ * @param txq
+ * Generic pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ * @param olx
+ * Configured offloads mask, presents the bits of MLX5_TXOFF_CONFIG_xxx
+ * values. Should be static to take compile time static configuration
+ * advantages.
+ *
+ * @return
+ * Number of packets successfully transmitted (<= pkts_n).
+ */
+static __rte_always_inline uint16_t
+mlx5_tx_burst_tmpl(struct mlx5_txq_data *__rte_restrict txq,
+ struct rte_mbuf **__rte_restrict pkts,
+ uint16_t pkts_n,
+ unsigned int olx)
+{
+ struct mlx5_txq_local loc;
+ enum mlx5_txcmp_code ret;
+ unsigned int part;
+
+ MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
+ MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
+ if (unlikely(!pkts_n))
+ return 0;
+ if (MLX5_TXOFF_CONFIG(INLINE))
+ loc.mbuf_free = 0;
+ loc.pkts_sent = 0;
+ loc.pkts_copy = 0;
+ loc.wqe_last = NULL;
+
+send_loop:
+ loc.pkts_loop = loc.pkts_sent;
+ /*
+ * Check if there are some CQEs, if any:
+ * - process an encountered errors
+ * - process the completed WQEs
+ * - free related mbufs
+ * - doorbell the NIC about processed CQEs
+ */
+ rte_prefetch0(*(pkts + loc.pkts_sent));
+ mlx5_tx_handle_completion(txq, olx);
+ /*
+ * Calculate the number of available resources - elts and WQEs.
+ * There are two possible different scenarios:
+ * - no data inlining into WQEs, one WQEBB may contains up to
+ * four packets, in this case elts become scarce resource
+ * - data inlining into WQEs, one packet may require multiple
+ * WQEBBs, the WQEs become the limiting factor.
+ */
+ MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
+ loc.elts_free = txq->elts_s -
+ (uint16_t)(txq->elts_head - txq->elts_tail);
+ MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
+ loc.wqe_free = txq->wqe_s -
+ (uint16_t)(txq->wqe_ci - txq->wqe_pi);
+ if (unlikely(!loc.elts_free || !loc.wqe_free))
+ goto burst_exit;
+ for (;;) {
+ /*
+ * Fetch the packet from array. Usually this is the first
+ * packet in series of multi/single segment packets.
+ */
+ loc.mbuf = *(pkts + loc.pkts_sent);
+ /* Dedicated branch for multi-segment packets. */
+ if (MLX5_TXOFF_CONFIG(MULTI) &&
+ unlikely(NB_SEGS(loc.mbuf) > 1)) {
+ /*
+ * Multi-segment packet encountered.
+ * Hardware is able to process it only
+ * with SEND/TSO opcodes, one packet
+ * per WQE, do it in dedicated routine.
+ */
+enter_send_multi:
+ MLX5_ASSERT(loc.pkts_sent >= loc.pkts_copy);
+ part = loc.pkts_sent - loc.pkts_copy;
+ if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
+ /*
+ * There are some single-segment mbufs not
+ * stored in elts. The mbufs must be in the
+ * same order as WQEs, so we must copy the
+ * mbufs to elts here, before the coming
+ * multi-segment packet mbufs is appended.
+ */
+ mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy,
+ part, olx);
+ loc.pkts_copy = loc.pkts_sent;
+ }
+ MLX5_ASSERT(pkts_n > loc.pkts_sent);
+ ret = mlx5_tx_burst_mseg(txq, pkts, pkts_n, &loc, olx);
+ if (!MLX5_TXOFF_CONFIG(INLINE))
+ loc.pkts_copy = loc.pkts_sent;
+ /*
+ * These returned code checks are supposed
+ * to be optimized out due to routine inlining.
+ */
+ if (ret == MLX5_TXCMP_CODE_EXIT) {
+ /*
+ * The routine returns this code when
+ * all packets are sent or there is no
+ * enough resources to complete request.
+ */
+ break;
+ }
+ if (ret == MLX5_TXCMP_CODE_ERROR) {
+ /*
+ * The routine returns this code when some error
+ * in the incoming packets format occurred.
+ */
+ txq->stats.oerrors++;
+ break;
+ }
+ if (ret == MLX5_TXCMP_CODE_SINGLE) {
+ /*
+ * The single-segment packet was encountered
+ * in the array, try to send it with the
+ * best optimized way, possible engaging eMPW.
+ */
+ goto enter_send_single;
+ }
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ ret == MLX5_TXCMP_CODE_TSO) {
+ /*
+ * The single-segment TSO packet was
+ * encountered in the array.
+ */
+ goto enter_send_tso;
+ }
+ /* We must not get here. Something is going wrong. */
+ MLX5_ASSERT(false);
+ txq->stats.oerrors++;
+ break;
+ }
+ /* Dedicated branch for single-segment TSO packets. */
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ unlikely(loc.mbuf->ol_flags & PKT_TX_TCP_SEG)) {
+ /*
+ * TSO might require special way for inlining
+ * (dedicated parameters) and is sent with
+ * MLX5_OPCODE_TSO opcode only, provide this
+ * in dedicated branch.
+ */
+enter_send_tso:
+ MLX5_ASSERT(NB_SEGS(loc.mbuf) == 1);
+ MLX5_ASSERT(pkts_n > loc.pkts_sent);
+ ret = mlx5_tx_burst_tso(txq, pkts, pkts_n, &loc, olx);
+ /*
+ * These returned code checks are supposed
+ * to be optimized out due to routine inlining.
+ */
+ if (ret == MLX5_TXCMP_CODE_EXIT)
+ break;
+ if (ret == MLX5_TXCMP_CODE_ERROR) {
+ txq->stats.oerrors++;
+ break;
+ }
+ if (ret == MLX5_TXCMP_CODE_SINGLE)
+ goto enter_send_single;
+ if (MLX5_TXOFF_CONFIG(MULTI) &&
+ ret == MLX5_TXCMP_CODE_MULTI) {
+ /*
+ * The multi-segment packet was
+ * encountered in the array.
+ */
+ goto enter_send_multi;
+ }
+ /* We must not get here. Something is going wrong. */
+ MLX5_ASSERT(false);
+ txq->stats.oerrors++;
+ break;
+ }
+ /*
+ * The dedicated branch for the single-segment packets
+ * without TSO. Often these ones can be sent using
+ * MLX5_OPCODE_EMPW with multiple packets in one WQE.
+ * The routine builds the WQEs till it encounters
+ * the TSO or multi-segment packet (in case if these
+ * offloads are requested at SQ configuration time).
+ */
+enter_send_single:
+ MLX5_ASSERT(pkts_n > loc.pkts_sent);
+ ret = mlx5_tx_burst_single(txq, pkts, pkts_n, &loc, olx);
+ /*
+ * These returned code checks are supposed
+ * to be optimized out due to routine inlining.
+ */
+ if (ret == MLX5_TXCMP_CODE_EXIT)
+ break;
+ if (ret == MLX5_TXCMP_CODE_ERROR) {
+ txq->stats.oerrors++;
+ break;
+ }
+ if (MLX5_TXOFF_CONFIG(MULTI) &&
+ ret == MLX5_TXCMP_CODE_MULTI) {
+ /*
+ * The multi-segment packet was
+ * encountered in the array.
+ */
+ goto enter_send_multi;
+ }
+ if (MLX5_TXOFF_CONFIG(TSO) &&
+ ret == MLX5_TXCMP_CODE_TSO) {
+ /*
+ * The single-segment TSO packet was
+ * encountered in the array.
+ */
+ goto enter_send_tso;
+ }
+ /* We must not get here. Something is going wrong. */
+ MLX5_ASSERT(false);
+ txq->stats.oerrors++;
+ break;
+ }
+ /*
+ * Main Tx loop is completed, do the rest:
+ * - set completion request if thresholds are reached
+ * - doorbell the hardware
+ * - copy the rest of mbufs to elts (if any)
+ */
+ MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE) ||
+ loc.pkts_sent >= loc.pkts_copy);
+ /* Take a shortcut if nothing is sent. */
+ if (unlikely(loc.pkts_sent == loc.pkts_loop))
+ goto burst_exit;
+ /* Request CQE generation if limits are reached. */
+ mlx5_tx_request_completion(txq, &loc, olx);
+ /*
+ * Ring QP doorbell immediately after WQE building completion
+ * to improve latencies. The pure software related data treatment
+ * can be completed after doorbell. Tx CQEs for this SQ are
+ * processed in this thread only by the polling.
+ *
+ * The rdma core library can map doorbell register in two ways,
+ * depending on the environment variable "MLX5_SHUT_UP_BF":
+ *
+ * - as regular cached memory, the variable is either missing or
+ * set to zero. This type of mapping may cause the significant
+ * doorbell register writing latency and requires explicit memory
+ * write barrier to mitigate this issue and prevent write combining.
+ *
+ * - as non-cached memory, the variable is present and set to not "0"
+ * value. This type of mapping may cause performance impact under
+ * heavy loading conditions but the explicit write memory barrier is
+ * not required and it may improve core performance.
+ *
+ * - the legacy behaviour (prior 19.08 release) was to use some
+ * heuristics to decide whether write memory barrier should
+ * be performed. This behavior is supported with specifying
+ * tx_db_nc=2, write barrier is skipped if application provides
+ * the full recommended burst of packets, it supposes the next
+ * packets are coming and the write barrier will be issued on
+ * the next burst (after descriptor writing, at least).
+ */
+ mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, !txq->db_nc &&
+ (!txq->db_heu || pkts_n % MLX5_TX_DEFAULT_BURST));
+ /* Not all of the mbufs may be stored into elts yet. */
+ part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent - loc.pkts_copy;
+ if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
+ /*
+ * There are some single-segment mbufs not stored in elts.
+ * It can be only if the last packet was single-segment.
+ * The copying is gathered into one place due to it is
+ * a good opportunity to optimize that with SIMD.
+ * Unfortunately if inlining is enabled the gaps in pointer
+ * array may happen due to early freeing of the inlined mbufs.
+ */
+ mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy, part, olx);
+ loc.pkts_copy = loc.pkts_sent;
+ }
+ MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
+ MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
+ if (pkts_n > loc.pkts_sent) {
+ /*
+ * If burst size is large there might be no enough CQE
+ * fetched from completion queue and no enough resources
+ * freed to send all the packets.
+ */
+ goto send_loop;
+ }
+burst_exit:
+#ifdef MLX5_PMD_SOFT_COUNTERS
+ /* Increment sent packets counter. */
+ txq->stats.opackets += loc.pkts_sent;
+#endif
+ if (MLX5_TXOFF_CONFIG(INLINE) && loc.mbuf_free)
+ __mlx5_tx_free_mbuf(txq, pkts, loc.mbuf_free, olx);
+ return loc.pkts_sent;
+}
+
#endif /* RTE_PMD_MLX5_TX_H_ */