app/testpmd: support Tx mbuf free on demand cmd
Checks
Commit Message
From: Chengwen Feng <fengchengwen@huawei.com>
This patch support tx_done_cleanup command:
tx_done_cleanup port (port_id) (queue_id) (free_cnt)
User must make sure there are no concurrent access to the same Tx
queue (like rte_eth_tx_burst, rte_eth_dev_tx_queue_stop and so on)
when this command executed.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
---
app/test-pmd/cmdline.c | 91 +++++++++++++++++++++++++++++
doc/guides/rel_notes/release_21_05.rst | 2 +
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 7 +++
3 files changed, 100 insertions(+)
Comments
Hi
Sorry, forgot to send this in last patchset.
> -----Original Message-----
> From: Lijun Ou <oulijun@huawei.com>
> Sent: Friday, March 5, 2021 15:33
> To: Yigit, Ferruh <ferruh.yigit@intel.com>
> Cc: Li, Xiaoyun <xiaoyun.li@intel.com>; dev@dpdk.org;
> linuxarm@openeuler.org
> Subject: [PATCH] app/testpmd: support Tx mbuf free on demand cmd
>
> From: Chengwen Feng <fengchengwen@huawei.com>
>
> This patch support tx_done_cleanup command:
> tx_done_cleanup port (port_id) (queue_id) (free_cnt)
>
> User must make sure there are no concurrent access to the same Tx queue (like
> rte_eth_tx_burst, rte_eth_dev_tx_queue_stop and so on) when this command
Users ...... this command is executed.
> executed.
>
> Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
> Signed-off-by: Lijun Ou <oulijun@huawei.com>
> ---
> app/test-pmd/cmdline.c | 91 +++++++++++++++++++++++++++++
> doc/guides/rel_notes/release_21_05.rst | 2 +
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 7 +++
> 3 files changed, 100 insertions(+)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> 14110eb..832ae70 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -36,6 +36,7 @@
> #include <rte_pci.h>
> #include <rte_ether.h>
> #include <rte_ethdev.h>
> +#include <rte_ethdev_driver.h>
> #include <rte_string_fns.h>
> #include <rte_devargs.h>
> #include <rte_flow.h>
> @@ -675,6 +676,9 @@ static void cmd_help_long_parsed(void *parsed_result,
> "set port (port_id) ptype_mask (ptype_mask)\n"
> " set packet types classification for a specific
> port\n\n"
>
> + "tx_done_cleanup (port_id) (queue_id) (free_cnt)\n"
> + " Cleanup a tx queue's mbuf on a port\n\n"
> +
> "set port (port_id) queue-region region_id (value) "
> "queue_start_index (value) queue_num (value)\n"
> " Set a queue region on a port\n\n"
> @@ -16910,6 +16914,92 @@ cmdline_parse_inst_t cmd_showport_macs = {
> },
> };
>
> +/* *** tx_done_cleanup *** */
> +struct cmd_tx_done_cleanup_result {
> + cmdline_fixed_string_t clean;
> + cmdline_fixed_string_t port;
> + uint16_t port_id;
> + uint16_t queue_id;
> + uint32_t free_cnt;
> +};
> +
> +static void
> +cmd_tx_done_cleanup_parsed(void *parsed_result,
> + __rte_unused struct cmdline *cl,
> + __rte_unused void *data)
> +{
> + struct cmd_tx_done_cleanup_result *res = parsed_result;
> + struct rte_eth_dev *dev;
> + uint16_t port_id = res->port_id;
> + uint16_t queue_id = res->queue_id;
> + uint32_t free_cnt = res->free_cnt;
> + int ret;
> +
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + printf("Invalid port_id %u\n", port_id);
> + return;
> + }
> +
> + dev = &rte_eth_devices[port_id];
> + if (queue_id >= dev->data->nb_tx_queues) {
> + printf("Invalid TX queue_id %u\n", queue_id);
Tx? You just want to send a patch to use Rx/Tx. You should keep concurrency.
> + return;
> + }
> +
> + if (dev->data->tx_queue_state[queue_id] !=
> + RTE_ETH_QUEUE_STATE_STARTED) {
> + printf("TX queue_id %u not started!\n", queue_id);
Tx?
> + return;
> + }
> +
> + /*
> + * rte_eth_tx_done_cleanup is a dataplane API, user must make sure
> + * there are no concurrent access to the same Tx queue (like
> + * rte_eth_tx_burst, rte_eth_dev_tx_queue_stop and so on) when this
> API
> + * called.
> + */
And I have some concerns on this. Users cannot know about this unless they read your code. I don't think this will likely happen.
So you should document this in testpmd doc when you introduced this command.
Or maybe you can have a way to stop that to happen. Maybe checking "test_done && engine != rxonly" before this?
In your comment, the tx forwarding shouldn't happen, right? Every fwd engine except rxonly will contain tx.
Well, it's still a rough way because tx may not happen even if it's io fwd.
Maybe other people have better ideas. Otherwise, you should at least document it.
@Yigit, Ferruh What do you think? Is there a better way?
> + ret = rte_eth_tx_done_cleanup(port_id, queue_id, free_cnt);
> + if (ret < 0) {
> + printf("Failed to cleanup mbuf for port %u TX queue %u "
Tx?
> + "error desc: %s(%d)\n",
> + port_id, queue_id, strerror(-ret), ret);
> + return;
> + }
> +
> + printf("Cleanup port %u TX queue %u mbuf nums: %u\n",
Tx?
> + port_id, queue_id, ret);
> +}
> +
> +cmdline_parse_token_string_t cmd_tx_done_cleanup_clean =
> + TOKEN_STRING_INITIALIZER(struct cmd_tx_done_cleanup_result, clean,
> + "tx_done_cleanup");
> +cmdline_parse_token_string_t cmd_tx_done_cleanup_port =
> + TOKEN_STRING_INITIALIZER(struct cmd_tx_done_cleanup_result, port,
> + "port");
> +cmdline_parse_token_num_t cmd_tx_done_cleanup_port_id =
> + TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result, port_id,
> + UINT16);
> +cmdline_parse_token_num_t cmd_tx_done_cleanup_queue_id =
> + TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result,
> queue_id,
> + UINT16);
> +cmdline_parse_token_num_t cmd_tx_done_cleanup_free_cnt =
> + TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result,
> free_cnt,
> + UINT32);
> +
> +cmdline_parse_inst_t cmd_tx_done_cleanup = {
> + .f = cmd_tx_done_cleanup_parsed,
> + .data = NULL,
> + .help_str = "tx_done_cleanup port <port_id> <queue_id> <free_cnt>",
> + .tokens = {
> + (void *)&cmd_tx_done_cleanup_clean,
> + (void *)&cmd_tx_done_cleanup_port,
> + (void *)&cmd_tx_done_cleanup_port_id,
> + (void *)&cmd_tx_done_cleanup_queue_id,
> + (void *)&cmd_tx_done_cleanup_free_cnt,
> + NULL,
> + },
> +};
> +
> /*
> *****************************************************************
> *************** */
>
> /* list of instructions */
> @@ -17035,6 +17125,7 @@ cmdline_parse_ctx_t main_ctx[] = {
> (cmdline_parse_inst_t *)&cmd_config_rss_reta,
> (cmdline_parse_inst_t *)&cmd_showport_reta,
> (cmdline_parse_inst_t *)&cmd_showport_macs,
> + (cmdline_parse_inst_t *)&cmd_tx_done_cleanup,
> (cmdline_parse_inst_t *)&cmd_config_burst,
> (cmdline_parse_inst_t *)&cmd_config_thresh,
> (cmdline_parse_inst_t *)&cmd_config_threshold, diff --git
> a/doc/guides/rel_notes/release_21_05.rst
> b/doc/guides/rel_notes/release_21_05.rst
> index 23f7f0b..8077573 100644
> --- a/doc/guides/rel_notes/release_21_05.rst
> +++ b/doc/guides/rel_notes/release_21_05.rst
> @@ -69,6 +69,8 @@ New Features
>
> * Added command to display Rx queue used descriptor count.
> ``show port (port_id) rxq (queue_id) desc used count``
> + * Added command to cleanup a Tx queue's mbuf on a port.
> + ``tx_done_cleanup port <port_id> <queue_id> <free_cnt>``
>
>
> Removed Items
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index f59eb8a..39281f5 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -272,6 +272,13 @@ and ready to be processed by the driver on a given RX
> queue::
>
> testpmd> show port (port_id) rxq (queue_id) desc used count
>
> +cleanup txq mbufs
> +~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Request the driver to free mbufs currently cached by the driver for a
> +given port's Tx queue::
> + testpmd> tx_done_cleanup port (port_id) (queue_id) (free_cnt)
> +
> show config
> ~~~~~~~~~~~
>
> --
> 2.7.4
在 2021/3/5 15:46, Li, Xiaoyun 写道:
> Hi
> Sorry, forgot to send this in last patchset.
>
>> -----Original Message-----
>> From: Lijun Ou <oulijun@huawei.com>
>> Sent: Friday, March 5, 2021 15:33
>> To: Yigit, Ferruh <ferruh.yigit@intel.com>
>> Cc: Li, Xiaoyun <xiaoyun.li@intel.com>; dev@dpdk.org;
>> linuxarm@openeuler.org
>> Subject: [PATCH] app/testpmd: support Tx mbuf free on demand cmd
>>
>> From: Chengwen Feng <fengchengwen@huawei.com>
>>
>> This patch support tx_done_cleanup command:
>> tx_done_cleanup port (port_id) (queue_id) (free_cnt)
>>
>> User must make sure there are no concurrent access to the same Tx queue (like
>> rte_eth_tx_burst, rte_eth_dev_tx_queue_stop and so on) when this command
> Users ...... this command is executed.
OK， I will fix.
>> executed.
>>
>> Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
>> Signed-off-by: Lijun Ou <oulijun@huawei.com>
>> ---
>> app/test-pmd/cmdline.c | 91 +++++++++++++++++++++++++++++
>> doc/guides/rel_notes/release_21_05.rst | 2 +
>> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 7 +++
>> 3 files changed, 100 insertions(+)
>>
>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
>> 14110eb..832ae70 100644
>> --- a/app/test-pmd/cmdline.c
>> +++ b/app/test-pmd/cmdline.c
>> @@ -36,6 +36,7 @@
>> #include <rte_pci.h>
>> #include <rte_ether.h>
>> #include <rte_ethdev.h>
>> +#include <rte_ethdev_driver.h>
>> #include <rte_string_fns.h>
>> #include <rte_devargs.h>
>> #include <rte_flow.h>
>> @@ -675,6 +676,9 @@ static void cmd_help_long_parsed(void *parsed_result,
>> "set port (port_id) ptype_mask (ptype_mask)\n"
>> " set packet types classification for a specific
>> port\n\n"
>>
>> + "tx_done_cleanup (port_id) (queue_id) (free_cnt)\n"
>> + " Cleanup a tx queue's mbuf on a port\n\n"
>> +
>> "set port (port_id) queue-region region_id (value) "
>> "queue_start_index (value) queue_num (value)\n"
>> " Set a queue region on a port\n\n"
>> @@ -16910,6 +16914,92 @@ cmdline_parse_inst_t cmd_showport_macs = {
>> },
>> };
>>
>> +/* *** tx_done_cleanup *** */
>> +struct cmd_tx_done_cleanup_result {
>> + cmdline_fixed_string_t clean;
>> + cmdline_fixed_string_t port;
>> + uint16_t port_id;
>> + uint16_t queue_id;
>> + uint32_t free_cnt;
>> +};
>> +
>> +static void
>> +cmd_tx_done_cleanup_parsed(void *parsed_result,
>> + __rte_unused struct cmdline *cl,
>> + __rte_unused void *data)
>> +{
>> + struct cmd_tx_done_cleanup_result *res = parsed_result;
>> + struct rte_eth_dev *dev;
>> + uint16_t port_id = res->port_id;
>> + uint16_t queue_id = res->queue_id;
>> + uint32_t free_cnt = res->free_cnt;
>> + int ret;
>> +
>> + if (!rte_eth_dev_is_valid_port(port_id)) {
>> + printf("Invalid port_id %u\n", port_id);
>> + return;
>> + }
>> +
>> + dev = &rte_eth_devices[port_id];
>> + if (queue_id >= dev->data->nb_tx_queues) {
>> + printf("Invalid TX queue_id %u\n", queue_id);
> Tx? You just want to send a patch to use Rx/Tx. You should keep concurrency.
Good idea. I will fix it.
>> + return;
>> + }
>> +
>> + if (dev->data->tx_queue_state[queue_id] !=
>> + RTE_ETH_QUEUE_STATE_STARTED) {
>> + printf("TX queue_id %u not started!\n", queue_id);
> Tx?
>
>> + return;
>> + }
>> +
>> + /*
>> + * rte_eth_tx_done_cleanup is a dataplane API, user must make sure
>> + * there are no concurrent access to the same Tx queue (like
>> + * rte_eth_tx_burst, rte_eth_dev_tx_queue_stop and so on) when this
>> API
>> + * called.
>> + */
> And I have some concerns on this. Users cannot know about this unless they read your code. I don't think this will likely happen.
> So you should document this in testpmd doc when you introduced this command.
>
> Or maybe you can have a way to stop that to happen. Maybe checking "test_done && engine != rxonly" before this?
> In your comment, the tx forwarding shouldn't happen, right? Every fwd engine except rxonly will contain tx.
> Well, it's still a rough way because tx may not happen even if it's io fwd.
>
> Maybe other people have better ideas. Otherwise, you should at least document it.
> @Yigit, Ferruh What do you think? Is there a better way?
I have add doc for noting.
>> + ret = rte_eth_tx_done_cleanup(port_id, queue_id, free_cnt);
>> + if (ret < 0) {
>> + printf("Failed to cleanup mbuf for port %u TX queue %u "
> Tx?
>
>> + "error desc: %s(%d)\n",
>> + port_id, queue_id, strerror(-ret), ret);
>> + return;
>> + }
>> +
>> + printf("Cleanup port %u TX queue %u mbuf nums: %u\n",
> Tx?
>
>> + port_id, queue_id, ret);
>> +}
>> +
>> +cmdline_parse_token_string_t cmd_tx_done_cleanup_clean =
>> + TOKEN_STRING_INITIALIZER(struct cmd_tx_done_cleanup_result, clean,
>> + "tx_done_cleanup");
>> +cmdline_parse_token_string_t cmd_tx_done_cleanup_port =
>> + TOKEN_STRING_INITIALIZER(struct cmd_tx_done_cleanup_result, port,
>> + "port");
>> +cmdline_parse_token_num_t cmd_tx_done_cleanup_port_id =
>> + TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result, port_id,
>> + UINT16);
>> +cmdline_parse_token_num_t cmd_tx_done_cleanup_queue_id =
>> + TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result,
>> queue_id,
>> + UINT16);
>> +cmdline_parse_token_num_t cmd_tx_done_cleanup_free_cnt =
>> + TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result,
>> free_cnt,
>> + UINT32);
>> +
>> +cmdline_parse_inst_t cmd_tx_done_cleanup = {
>> + .f = cmd_tx_done_cleanup_parsed,
>> + .data = NULL,
>> + .help_str = "tx_done_cleanup port <port_id> <queue_id> <free_cnt>",
>> + .tokens = {
>> + (void *)&cmd_tx_done_cleanup_clean,
>> + (void *)&cmd_tx_done_cleanup_port,
>> + (void *)&cmd_tx_done_cleanup_port_id,
>> + (void *)&cmd_tx_done_cleanup_queue_id,
>> + (void *)&cmd_tx_done_cleanup_free_cnt,
>> + NULL,
>> + },
>> +};
>> +
>> /*
>> *****************************************************************
>> *************** */
>>
>> /* list of instructions */
>> @@ -17035,6 +17125,7 @@ cmdline_parse_ctx_t main_ctx[] = {
>> (cmdline_parse_inst_t *)&cmd_config_rss_reta,
>> (cmdline_parse_inst_t *)&cmd_showport_reta,
>> (cmdline_parse_inst_t *)&cmd_showport_macs,
>> + (cmdline_parse_inst_t *)&cmd_tx_done_cleanup,
>> (cmdline_parse_inst_t *)&cmd_config_burst,
>> (cmdline_parse_inst_t *)&cmd_config_thresh,
>> (cmdline_parse_inst_t *)&cmd_config_threshold, diff --git
>> a/doc/guides/rel_notes/release_21_05.rst
>> b/doc/guides/rel_notes/release_21_05.rst
>> index 23f7f0b..8077573 100644
>> --- a/doc/guides/rel_notes/release_21_05.rst
>> +++ b/doc/guides/rel_notes/release_21_05.rst
>> @@ -69,6 +69,8 @@ New Features
>>
>> * Added command to display Rx queue used descriptor count.
>> ``show port (port_id) rxq (queue_id) desc used count``
>> + * Added command to cleanup a Tx queue's mbuf on a port.
>> + ``tx_done_cleanup port <port_id> <queue_id> <free_cnt>``
>>
>>
>> Removed Items
>> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> index f59eb8a..39281f5 100644
>> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> @@ -272,6 +272,13 @@ and ready to be processed by the driver on a given RX
>> queue::
>>
>> testpmd> show port (port_id) rxq (queue_id) desc used count
>>
>> +cleanup txq mbufs
>> +~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +Request the driver to free mbufs currently cached by the driver for a
>> +given port's Tx queue::
>> + testpmd> tx_done_cleanup port (port_id) (queue_id) (free_cnt)
>> +
>> show config
>> ~~~~~~~~~~~
>>
>> --
>> 2.7.4
> .
>
@@ -36,6 +36,7 @@
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
#include <rte_string_fns.h>
#include <rte_devargs.h>
#include <rte_flow.h>
@@ -675,6 +676,9 @@ static void cmd_help_long_parsed(void *parsed_result,
"set port (port_id) ptype_mask (ptype_mask)\n"
" set packet types classification for a specific port\n\n"
+ "tx_done_cleanup (port_id) (queue_id) (free_cnt)\n"
+ " Cleanup a tx queue's mbuf on a port\n\n"
+
"set port (port_id) queue-region region_id (value) "
"queue_start_index (value) queue_num (value)\n"
" Set a queue region on a port\n\n"
@@ -16910,6 +16914,92 @@ cmdline_parse_inst_t cmd_showport_macs = {
},
};
+/* *** tx_done_cleanup *** */
+struct cmd_tx_done_cleanup_result {
+ cmdline_fixed_string_t clean;
+ cmdline_fixed_string_t port;
+ uint16_t port_id;
+ uint16_t queue_id;
+ uint32_t free_cnt;
+};
+
+static void
+cmd_tx_done_cleanup_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_tx_done_cleanup_result *res = parsed_result;
+ struct rte_eth_dev *dev;
+ uint16_t port_id = res->port_id;
+ uint16_t queue_id = res->queue_id;
+ uint32_t free_cnt = res->free_cnt;
+ int ret;
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ printf("Invalid port_id %u\n", port_id);
+ return;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ if (queue_id >= dev->data->nb_tx_queues) {
+ printf("Invalid TX queue_id %u\n", queue_id);
+ return;
+ }
+
+ if (dev->data->tx_queue_state[queue_id] !=
+ RTE_ETH_QUEUE_STATE_STARTED) {
+ printf("TX queue_id %u not started!\n", queue_id);
+ return;
+ }
+
+ /*
+ * rte_eth_tx_done_cleanup is a dataplane API, user must make sure
+ * there are no concurrent access to the same Tx queue (like
+ * rte_eth_tx_burst, rte_eth_dev_tx_queue_stop and so on) when this API
+ * called.
+ */
+ ret = rte_eth_tx_done_cleanup(port_id, queue_id, free_cnt);
+ if (ret < 0) {
+ printf("Failed to cleanup mbuf for port %u TX queue %u "
+ "error desc: %s(%d)\n",
+ port_id, queue_id, strerror(-ret), ret);
+ return;
+ }
+
+ printf("Cleanup port %u TX queue %u mbuf nums: %u\n",
+ port_id, queue_id, ret);
+}
+
+cmdline_parse_token_string_t cmd_tx_done_cleanup_clean =
+ TOKEN_STRING_INITIALIZER(struct cmd_tx_done_cleanup_result, clean,
+ "tx_done_cleanup");
+cmdline_parse_token_string_t cmd_tx_done_cleanup_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_tx_done_cleanup_result, port,
+ "port");
+cmdline_parse_token_num_t cmd_tx_done_cleanup_port_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result, port_id,
+ UINT16);
+cmdline_parse_token_num_t cmd_tx_done_cleanup_queue_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result, queue_id,
+ UINT16);
+cmdline_parse_token_num_t cmd_tx_done_cleanup_free_cnt =
+ TOKEN_NUM_INITIALIZER(struct cmd_tx_done_cleanup_result, free_cnt,
+ UINT32);
+
+cmdline_parse_inst_t cmd_tx_done_cleanup = {
+ .f = cmd_tx_done_cleanup_parsed,
+ .data = NULL,
+ .help_str = "tx_done_cleanup port <port_id> <queue_id> <free_cnt>",
+ .tokens = {
+ (void *)&cmd_tx_done_cleanup_clean,
+ (void *)&cmd_tx_done_cleanup_port,
+ (void *)&cmd_tx_done_cleanup_port_id,
+ (void *)&cmd_tx_done_cleanup_queue_id,
+ (void *)&cmd_tx_done_cleanup_free_cnt,
+ NULL,
+ },
+};
+
/* ******************************************************************************** */
/* list of instructions */
@@ -17035,6 +17125,7 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_config_rss_reta,
(cmdline_parse_inst_t *)&cmd_showport_reta,
(cmdline_parse_inst_t *)&cmd_showport_macs,
+ (cmdline_parse_inst_t *)&cmd_tx_done_cleanup,
(cmdline_parse_inst_t *)&cmd_config_burst,
(cmdline_parse_inst_t *)&cmd_config_thresh,
(cmdline_parse_inst_t *)&cmd_config_threshold,
@@ -69,6 +69,8 @@ New Features
* Added command to display Rx queue used descriptor count.
``show port (port_id) rxq (queue_id) desc used count``
+ * Added command to cleanup a Tx queue's mbuf on a port.
+ ``tx_done_cleanup port <port_id> <queue_id> <free_cnt>``
Removed Items
@@ -272,6 +272,13 @@ and ready to be processed by the driver on a given RX queue::
testpmd> show port (port_id) rxq (queue_id) desc used count
+cleanup txq mbufs
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Request the driver to free mbufs currently cached by the driver for a given port's
+Tx queue::
+ testpmd> tx_done_cleanup port (port_id) (queue_id) (free_cnt)
+
show config
~~~~~~~~~~~