[v3] test_plans: change test plan according to DPDK-25551
Commit Message
The related test plans:
cvl_dcf_switch_filter_test_plan.rst
dcf_lifecycle_test_plan.rst
iavf_fdir_test_plan.rst
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
Comments
Hi yuan,
Community don't know DPDK-25551, could you please simply describe it ?
Thanks,
Lijuan
@@ -4549,13 +4549,7 @@ Subcase 1: DCF stop/DCF start
tetspmd> port stop 0
testpmd> port start 0
-4. check the rule list::
-
- testpmd> flow list 0
-
- check the rule is still there.
-
-5. send matched packets, port 1 can still receive the packets.
+4. send matched packets, port 1 can't receive the packets.
Test case: Drop action test
===========================
@@ -950,9 +950,8 @@ TC30: DCF enabled, DCF VF reset
port start 0
start
-4. check the rule still be listed.
- send the packet with new mac address of VF1 again, check the packet still be dropped by VF1.
- the rule still take effect.
+4. send the packet with new mac address of VF1 again, check the packet not dropped by VF1.
+ the rule is removed.
DCF mode and any ACL filters (not added by DCF) shall be mutually exclusive
===========================================================================
@@ -4077,9 +4077,9 @@ Subcase 1: port stop/port start
testpmd> port stop 0
testpmd> port start 0
-4. show the rule list, the rule is still there.
+4. show the rule list, there is no rule listed.
-5. verify matched packet can be still redirected to queue 1 with FDIR matched ID=0x0.
+5. verify matched packet is distributed by RSS without FDIR matched ID.
Subcase 2: delete rules
-----------------------
@@ -4182,8 +4182,9 @@ Subcase 3: VF port reset and create a new rule
the port can be stop/reset/start normally without error message.
-4. check the rule still be listed,
- send matched packet to vf0, check the packet is redirected by RSS without FDIR matched ID.
+4. check there is not rule listed on port 0.
+ the rule of port 1 is still be listed.
+ send matched packet to vf0, check the packet is distributed by RSS.
send matched packet to vf1, check the packet is redirected to queue 5 with FDIR matched ID=0x0.
5. create rule 0 on port 0 again, the rule can be created successfully.
@@ -4210,18 +4211,18 @@ Subcase 4: VF port reset and delete the rule
3. vf reset::
- port stop 0
- port reset 0
- port start 0
+ port stop 1
+ port reset 1
+ port start 1
the port can be stop/reset/start normally without error message.
-4. check the rule still be listed,
- send matched packet to vf0, check the packet is redirected by RSS without FDIR matched ID.
- send matched packet to vf1, check the packet is redirected to queue 5 with FDIR matched ID=0x0.
+4. check there is not rule listed on port 1.
+ the rule of port 0 is still be listed.
+ send matched packet to vf0, check the packet is redirected to queue 5 with FDIR matched ID=0x0.
+ send matched packet to vf1, check the packet is distributed by RSS.
-5. destroy rule 0 of vf0, report error, but no core dump.
- destroy rule 0 of vf1 successfully.
+5. destroy rule 0 of vf0 successfully.
send matched packet to vf0, check the packet is redirected by RSS without FDIR matched ID.
send matched packet to vf1, check the packet is redirected by RSS without FDIR matched ID.
@@ -4260,7 +4261,7 @@ Subcase 5: PF reset VF and create a new rule
the port can be stop/reset/start normally without error message.
-5. check the rule of vf0 still be listed,
+5. check there is not rule listed on vf0.
send matched packet to vf0 with new mac address, check the packet is redirected by RSS without FDIR matched ID.
send matched packet to vf1, check the packet is redirected to queue 5 with FDIR matched ID=0x0.
@@ -4291,27 +4292,27 @@ Subcase 6: PF reset VF and delete the rule
3. pf trigger vf reset::
- ip link set enp134s0f0 vf 0 mac 00:11:22:33:44:56
+ ip link set enp134s0f0 vf 1 mac 00:11:22:33:44:56
4. testpmd shows::
- Port 0: reset event
+ Port 1: reset event
then vf reset::
- port stop 0
- port reset 0
- port start 0
+ port stop 1
+ port reset 1
+ port start 1
the port can be stop/reset/start normally without error message.
-5. destroy rule 0 of vf0, report error, but no core dump.
- destroy rule 0 of vf1 successfully.
+5. check there is not rule listed on vf1.
+ destroy rule 0 of vf0 successfully.
send matched packet to vf0, check the packet is redirected by RSS without FDIR matched ID.
send matched packet to vf1, check the packet is redirected by RSS without FDIR matched ID.
-6. create rule 0 on port 0 again, the rule can be created successfully.
- send matched packet to port 0, the packet can be redirected to queue 5 with FDIR matched ID=0x0.
+6. create rule 1 on port 1 again, the rule can be created successfully.
+ send matched packet to port 1, the packet can be redirected to queue 5 with FDIR matched ID=0x0.
7. quit and relaunch testpmd, then create same rules successfully.