diff mbox series

[V1] modify dts adapt for scapy update to 2.4.4

Message ID 20201112030420.21699-1-junx.w.zhou@intel.com (mailing list archive)
State Accepted
Headers
Series [V1] modify dts adapt for scapy update to 2.4.4 |

Commit Message

Zhou, JunX W Nov. 12, 2020, 3:04 a.m. UTC 
  modify dts adapt for scapy update to 2.4.4

Signed-off-by: Zhou Jun <junx.w.zhou@intel.com>
---
 tests/TestSuite_ddp_ppp_l2tp.py              | 4 ++--
 tests/TestSuite_vxlan_gpe_support_in_i40e.py | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

Comments

Zhou, JunX W Nov. 12, 2020, 3:06 a.m. UTC | #1 
Tested-by: Zhou, Jun <junx.w.zhou@intel.com>

-----Original Message-----
From: Zhou Jun [mailto:junx.w.zhou@intel.com] 
Sent: Thursday, November 12, 2020 11:04 AM
To: dts@dpdk.org
Cc: Zhou, JunX W <junx.w.zhou@intel.com>
Subject: [dts][PATCH V1] modify dts adapt for scapy update to 2.4.4
Zhao, HaiyangX Nov. 17, 2020, 9:58 a.m. UTC | #2 
Acked-by: Haiyang Zhao <haiyangx.zhao@intel.com>

Best Regards,
Zhao Haiyang


> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Zhou, JunX W
> Sent: Thursday, November 12, 2020 11:06
> To: Zhou, JunX W <junx.w.zhou@intel.com>; dts@dpdk.org
> Subject: Re: [dts] [PATCH V1] modify dts adapt for scapy update to 2.4.4
> 
> Tested-by: Zhou, Jun <junx.w.zhou@intel.com>
> 
> -----Original Message-----
> From: Zhou Jun [mailto:junx.w.zhou@intel.com]
> Sent: Thursday, November 12, 2020 11:04 AM
> To: dts@dpdk.org
> Cc: Zhou, JunX W <junx.w.zhou@intel.com>
> Subject: [dts][PATCH V1] modify dts adapt for scapy update to 2.4.4
Tu, Lijuan Nov. 18, 2020, 3:16 a.m. UTC | #3 
> modify dts adapt for scapy update to 2.4.4
> 
> Signed-off-by: Zhou Jun <junx.w.zhou@intel.com>

Applied
diff mbox series

Patch

diff --git a/tests/TestSuite_ddp_ppp_l2tp.py b/tests/TestSuite_ddp_ppp_l2tp.py
index 8017a309..57b8c352 100644
--- a/tests/TestSuite_ddp_ppp_l2tp.py
+++ b/tests/TestSuite_ddp_ppp_l2tp.py
@@ -157,9 +157,9 @@  class TestDdpPppL2tp(TestCase):
         if flowtype == 26:
             a = Ether(dst="3C:FD:FE:A3:A0:01", src="4C:FD:FE:A3:A0:01")/IP()/UDP(dport=1701, sport=1701)/L2TP(session_id=0x7)/Raw("X"*20)
         if flowtype == 28:
-            a = Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x21)/IP(dst="1.1.1.1", src="2.2.2.2")/UDP(dport=4000, sport=8000)/Raw("X"*20)
+            a = Ether()/PPPoE(sessionid=0x7)/PPP(b"\x00\x21")/IP(dst="1.1.1.1", src="2.2.2.2")/UDP(dport=4000, sport=8000)/Raw("X"*20)
         if flowtype == 29:
-            a = Ether()/PPPoE(sessionid=0x7)/PPP(proto=0x57)/IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001", src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/UDP(dport=4000, sport=8000)/Raw("X"*20)
+            a = Ether()/PPPoE(sessionid=0x7)/PPP(b"\x00\x57")/IPv6(dst="1001:0db8:85a3:0000:0000:8a2e:0370:0001", src="2001:0db8:85a3:0000:0000:8a2e:0370:0001")/UDP(dport=4000, sport=8000)/Raw("X"*20)
         if flowtype == 30:
             a = Ether(dst="3C:FD:FE:A3:A0:01", src="4C:FD:FE:A3:A0:01")/PPPoE(sessionid=0x7)
         ba = bytearray(bytes(a))
diff --git a/tests/TestSuite_vxlan_gpe_support_in_i40e.py b/tests/TestSuite_vxlan_gpe_support_in_i40e.py
index 8b781e37..b5022540 100644
--- a/tests/TestSuite_vxlan_gpe_support_in_i40e.py
+++ b/tests/TestSuite_vxlan_gpe_support_in_i40e.py
@@ -43,7 +43,7 @@  from pmd_output import PmdOutput
 from scapy.utils import wrpcap, rdpcap
 from scapy.layers.inet import Ether, IP, UDP
 from scapy.layers.l2 import Dot1Q
-from vxlan import VXLAN
+from scapy.layers.vxlan import VXLAN
 from scapy.config import conf
 from test_case import TestCase
 from settings import FOLDERS
@@ -124,7 +124,7 @@  class VxlanGpeTestConfig(object):
         cwd = os.getcwd()
         dir_vxlan_module = cwd + r'/' + FOLDERS['Depends'] + r'/' + FOLDERS['scapy_modules']
         self.test_case.tester.scapy_append("sys.path.append('%s')" % dir_vxlan_module)
-        self.test_case.tester.scapy_append("from vxlan import VXLAN")
+        self.test_case.tester.scapy_append("from scapy.layers.vxlan import VXLAN")
         self.test_case.tester.scapy_append(
             'pcap = rdpcap("%s")' % self.pcap_file)
         self.test_case.tester.scapy_append(