[v5,1/2] cryptodev: support enqueue & dequeue callback functions

  This patch adds APIs to add/remove callback functions on crypto
enqueue/dequeue burst. The callback function will be called for
each burst of crypto ops received on a given crypto device queue pair.

Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
 config/rte_config.h                            |   1 +
 doc/guides/prog_guide/cryptodev_lib.rst        |  47 +++
 doc/guides/rel_notes/release_20_11.rst         |   6 +
 lib/librte_cryptodev/meson.build               |   2 +-
 lib/librte_cryptodev/rte_cryptodev.c           | 419 ++++++++++++++++++++++++-
 lib/librte_cryptodev/rte_cryptodev.h           | 260 ++++++++++++++-
 lib/librte_cryptodev/rte_cryptodev_version.map |   4 +
 7 files changed, 736 insertions(+), 3 deletions(-)
  

> This patch adds APIs to add/remove callback functions on crypto
> enqueue/dequeue burst. The callback function will be called for
> each burst of crypto ops received on a given crypto device queue pair.
> 
> Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
>  config/rte_config.h                            |   1 +
>  doc/guides/prog_guide/cryptodev_lib.rst        |  47 +++
>  doc/guides/rel_notes/release_20_11.rst         |   6 +
>  lib/librte_cryptodev/meson.build               |   2 +-
>  lib/librte_cryptodev/rte_cryptodev.c           | 419 ++++++++++++++++++++++++-
>  lib/librte_cryptodev/rte_cryptodev.h           | 260 ++++++++++++++-
>  lib/librte_cryptodev/rte_cryptodev_version.map |   4 +
>  7 files changed, 736 insertions(+), 3 deletions(-)
> 
> diff --git a/config/rte_config.h b/config/rte_config.h
> index 03d90d7..e999d93 100644
> --- a/config/rte_config.h
> +++ b/config/rte_config.h
> @@ -61,6 +61,7 @@
>  /* cryptodev defines */
>  #define RTE_CRYPTO_MAX_DEVS 64
>  #define RTE_CRYPTODEV_NAME_LEN 64
> +#define RTE_CRYPTO_CALLBACKS 1
> 
>  /* compressdev defines */
>  #define RTE_COMPRESS_MAX_DEVS 64
> diff --git a/doc/guides/prog_guide/cryptodev_lib.rst b/doc/guides/prog_guide/cryptodev_lib.rst
> index 72129e4..9d0ff59 100644
> --- a/doc/guides/prog_guide/cryptodev_lib.rst
> +++ b/doc/guides/prog_guide/cryptodev_lib.rst
> @@ -338,6 +338,53 @@ start of private data information. The offset is counted from the start of the
>  rte_crypto_op including other crypto information such as the IVs (since there can
>  be an IV also for authentication).
> 
> +User callback APIs
> +~~~~~~~~~~~~~~~~~~
> +The add APIs configures a user callback function to be called for each burst of crypto
> +ops received/sent on a given crypto device queue pair. The return value is a pointer
> +that can be used later to remove the callback API. Application is expected to register
> +a callback function of type ``rte_cryptodev_callback_fn``. Multiple callback functions
> +can be added for a given queue pair. API does not restrict on maximum number of
> +callbacks.
> +
> +Callbacks registered by application would not survive rte_cryptodev_configure() as it
> +reinitializes the callback list. It is user responsibility to remove all installed
> +callbacks before calling rte_cryptodev_configure() to avoid possible memory leakage.
> +
> +So, application is expected to add user callback after rte_cryptodev_configure().
> +The callbacks can also be added at the runtime. These callbacks get executed when
> +``rte_cryptodev_enqueue_burst``/``rte_cryptodev_dequeue_burst`` is called.
> +
> +.. code-block:: c
> +
> +   struct rte_cryptodev_cb *
> +	rte_cryptodev_add_enq_callback(uint8_t dev_id,
> +				       uint16_t qp_id,
> +				       rte_cryptodev_callback_fn cb_fn,
> +				       void *cb_arg);
> +
> +   struct rte_cryptodev_cb *
> +	rte_cryptodev_add_deq_callback(uint8_t dev_id,
> +				       uint16_t qp_id,
> +				       rte_cryptodev_callback_fn cb_fn,
> +				       void *cb_arg);
> +
> +	uint16_t (*rte_cryptodev_callback_fn)(uint16_t dev_id, uint16_t qp_id,
> +		struct rte_crypto_op **ops, uint16_t nb_ops, void *user_param);
> +
> +The remove API removes a callback function added by
> +``rte_cryptodev_add_enq_callback``/``rte_cryptodev_add_deq_callback''.
> +
> +.. code-block:: c
> +
> +	int rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> +					      uint16_t qp_id,
> +				              struct rte_cryptodev_cb *cb);
> +
> +	int rte_cryptodev_remove_deq_callback(uint8_t dev_id,
> +					      uint16_t qp_id,
> +				              struct rte_cryptodev_cb *cb);
> +
> 
>  Enqueue / Dequeue Burst APIs
>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
> index 48717ee..d12fb31 100644
> --- a/doc/guides/rel_notes/release_20_11.rst
> +++ b/doc/guides/rel_notes/release_20_11.rst
> @@ -174,6 +174,12 @@ New Features
>    enqueue/dequeue operations but does not necessarily depends on
>    mbufs and cryptodev operation mempools.
> 
> +* **Added enqueue & dequeue callback APIs for cryptodev library.**
> +
> +  Cryptodev libray is added with enqueue & dequeue callback APIs to
> +  enable applications to add/remove user callbacks which gets called
> +  for every enqueue/dequeue operation.
> +
>  * **Updated the aesni_mb crypto PMD.**
> 
>    * Added support for AES-ECB 128, 192 and 256.
> diff --git a/lib/librte_cryptodev/meson.build b/lib/librte_cryptodev/meson.build
> index c4c6b3b..8c5493f 100644
> --- a/lib/librte_cryptodev/meson.build
> +++ b/lib/librte_cryptodev/meson.build
> @@ -9,4 +9,4 @@ headers = files('rte_cryptodev.h',
>  	'rte_crypto.h',
>  	'rte_crypto_sym.h',
>  	'rte_crypto_asym.h')
> -deps += ['kvargs', 'mbuf']
> +deps += ['kvargs', 'mbuf', 'rcu']
> diff --git a/lib/librte_cryptodev/rte_cryptodev.c b/lib/librte_cryptodev/rte_cryptodev.c
> index 3d95ac6..677c2ef 100644
> --- a/lib/librte_cryptodev/rte_cryptodev.c
> +++ b/lib/librte_cryptodev/rte_cryptodev.c
> @@ -448,6 +448,127 @@ struct rte_cryptodev_sym_session_pool_private_data {
>  	return 0;
>  }
> 
> +#ifdef RTE_CRYPTO_CALLBACKS
> +/* spinlock for crypto device enq callbacks */
> +static rte_spinlock_t rte_cryptodev_callback_lock = RTE_SPINLOCK_INITIALIZER;
> +
> +static void
> +cryptodev_cb_cleanup(struct rte_cryptodev *dev)
> +{
> +	struct rte_cryptodev_cb_rcu *list;
> +	struct rte_cryptodev_cb *cb, *next;
> +	uint16_t qp_id;
> +
> +	if (dev->enq_cbs == NULL && dev->deq_cbs == NULL)
> +		return;
> +
> +	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> +		list = &dev->enq_cbs[qp_id];
> +		cb = list->next;
> +		while (cb != NULL) {
> +			next = cb->next;
> +			rte_free(cb);
> +			cb = next;
> +		}
> +
> +		rte_free(list->qsbr);
> +	}
> +
> +	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> +		list = &dev->deq_cbs[qp_id];
> +		cb = list->next;
> +		while (cb != NULL) {
> +			next = cb->next;
> +			rte_free(cb);
> +			cb = next;
> +		}
> +
> +		rte_free(list->qsbr);
> +	}
> +
> +	rte_free(dev->enq_cbs);
> +	dev->enq_cbs = NULL;
> +	rte_free(dev->deq_cbs);
> +	dev->deq_cbs = NULL;
> +}
> +
> +static int
> +cryptodev_cb_init(struct rte_cryptodev *dev)
> +{
> +	struct rte_cryptodev_cb_rcu *list;
> +	struct rte_rcu_qsbr *qsbr;
> +	uint16_t qp_id;
> +	size_t size;
> +
> +	/* Max thread set to 1, as one DP thread accessing a queue-pair */
> +	const uint32_t max_threads = 1;
> +
> +	dev->enq_cbs = rte_zmalloc(NULL,
> +				   sizeof(struct rte_cryptodev_cb_rcu) *
> +				   dev->data->nb_queue_pairs, 0);
> +	if (dev->enq_cbs == NULL) {
> +		CDEV_LOG_ERR("Failed to allocate memory for enq callbacks");
> +		rte_errno = ENOMEM;

As a nit - if this function returns an error code as return value,
no point to update rte_errno too.

> +		return -ENOMEM;
> +	}
> +
> +	dev->deq_cbs = rte_zmalloc(NULL,
> +				   sizeof(struct rte_cryptodev_cb_rcu) *
> +				   dev->data->nb_queue_pairs, 0);
> +	if (dev->deq_cbs == NULL) {
> +		CDEV_LOG_ERR("Failed to allocate memory for deq callbacks");
> +		rte_free(dev->enq_cbs);
> +		rte_errno = ENOMEM;
> +		return -ENOMEM;
> +	}
> +
> +	/* Create RCU QSBR variable */
> +	size = rte_rcu_qsbr_get_memsize(max_threads);
> +
> +	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> +		list = &dev->enq_cbs[qp_id];
> +		qsbr = rte_zmalloc(NULL, size, RTE_CACHE_LINE_SIZE);
> +		if (qsbr == NULL) {
> +			CDEV_LOG_ERR("Failed to allocate memory for RCU on "
> +				"queue_pair_id=%d", qp_id);
> +			goto cb_init_err;
> +		}
> +
> +		if (rte_rcu_qsbr_init(qsbr, max_threads)) {
> +			CDEV_LOG_ERR("Failed to initialize for RCU on "
> +				"queue_pair_id=%d", qp_id);
> +			goto cb_init_err;
> +		}
> +
> +		list->qsbr = qsbr;
> +	}
> +
> +	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> +		list = &dev->deq_cbs[qp_id];
> +		qsbr = rte_zmalloc(NULL, size, RTE_CACHE_LINE_SIZE);
> +		if (qsbr == NULL) {
> +			CDEV_LOG_ERR("Failed to allocate memory for RCU on "
> +				"queue_pair_id=%d", qp_id);
> +			goto cb_init_err;
> +		}
> +
> +		if (rte_rcu_qsbr_init(qsbr, max_threads)) {
> +			CDEV_LOG_ERR("Failed to initialize for RCU on "
> +				"queue_pair_id=%d", qp_id);
> +			goto cb_init_err;
> +		}
> +
> +		list->qsbr = qsbr;
> +	}
> +
> +	return 0;
> +
> +cb_init_err:
> +	cryptodev_cb_cleanup(dev);
> +	rte_errno = ENOMEM;

Same here - no need to update rte_errno.

> +	return -ENOMEM;
> +}
> +#endif
> 
>  const char *
>  rte_cryptodev_get_feature_name(uint64_t flag)
> @@ -927,6 +1048,11 @@ struct rte_cryptodev *
> 
>  	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP);
> 
> +#ifdef RTE_CRYPTO_CALLBACKS
> +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> +	cryptodev_cb_cleanup(dev);
> +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> +#endif
>  	/* Setup new number of queue pairs and reconfigure device. */
>  	diag = rte_cryptodev_queue_pairs_config(dev, config->nb_queue_pairs,
>  			config->socket_id);
> @@ -936,11 +1062,19 @@ struct rte_cryptodev *
>  		return diag;
>  	}
> 
> +#ifdef RTE_CRYPTO_CALLBACKS
> +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> +	diag = cryptodev_cb_init(dev);
> +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> +	if (diag) {
> +		CDEV_LOG_ERR("Callback init failed for dev_id=%d", dev_id);
> +		return diag;
> +	}
> +#endif
>  	rte_cryptodev_trace_configure(dev_id, config);
>  	return (*dev->dev_ops->dev_configure)(dev, config);
>  }
> 
> -
>  int
>  rte_cryptodev_start(uint8_t dev_id)
>  {
> @@ -1136,6 +1270,289 @@ struct rte_cryptodev *
>  			socket_id);
>  }
> 
> +#ifdef RTE_CRYPTO_CALLBACKS
> +struct rte_cryptodev_cb *
> +rte_cryptodev_add_enq_callback(uint8_t dev_id,
> +			       uint16_t qp_id,
> +			       rte_cryptodev_callback_fn cb_fn,
> +			       void *cb_arg)
> +{
> +	struct rte_cryptodev *dev;
> +	struct rte_cryptodev_cb_rcu *list;
> +	struct rte_cryptodev_cb *cb, *tail;
> +
> +	if (!cb_fn) {
> +		CDEV_LOG_ERR("Callback is NULL on dev_id=%d", dev_id);
> +		rte_errno = EINVAL;
> +		return NULL;
> +	}
> +
> +	if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> +		CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> +		rte_errno = ENODEV;
> +		return NULL;
> +	}
> +
> +	dev = &rte_crypto_devices[dev_id];
> +	if (qp_id >= dev->data->nb_queue_pairs) {
> +		CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> +		rte_errno = ENODEV;
> +		return NULL;
> +	}
> +
> +	cb = rte_zmalloc(NULL, sizeof(*cb), 0);
> +	if (cb == NULL) {
> +		CDEV_LOG_ERR("Failed to allocate memory for callback on "
> +			     "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> +		rte_errno = ENOMEM;
> +		return NULL;
> +	}
> +
> +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> +
> +	cb->fn = cb_fn;
> +	cb->arg = cb_arg;
> +
> +	/* Add the callbacks in fifo order. */
> +	list = &dev->enq_cbs[qp_id];
> +	tail = list->next;
> +
> +	if (tail) {
> +		while (tail->next)
> +			tail = tail->next;
> +		/* Stores to cb->fn and cb->param should complete before
> +		 * cb is visible to data plane.
> +		 */
> +		__atomic_store_n(&tail->next, cb, __ATOMIC_RELEASE);
> +	} else {
> +		/* Stores to cb->fn and cb->param should complete before
> +		 * cb is visible to data plane.
> +		 */
> +		__atomic_store_n(&list->next, cb, __ATOMIC_RELEASE);
> +	}
> +
> +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> +
> +	return cb;
> +}
> +
> +int
> +rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> +				  uint16_t qp_id,
> +				  struct rte_cryptodev_cb *cb)
> +{
> +	struct rte_cryptodev *dev;
> +	struct rte_cryptodev_cb **prev_cb, *curr_cb;
> +	struct rte_cryptodev_cb_rcu *list;
> +	int ret;
> +
> +	ret = -EINVAL;
> +
> +	if (!cb) {
> +		CDEV_LOG_ERR("Callback is NULL");
> +		rte_errno = EINVAL;

Same story here - no need to update rte_errno, if we provide error code
as return value.

> +		return -EINVAL;
> +	}
> +
> +	if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> +		CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> +		rte_errno = ENODEV;
> +		return -ENODEV;
> +	}
> +
> +	dev = &rte_crypto_devices[dev_id];
> +	if (qp_id >= dev->data->nb_queue_pairs) {
> +		CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> +		rte_errno = ENODEV;
> +		return -ENODEV;
> +	}
> +
> +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> +	if (dev->enq_cbs == NULL) {
> +		CDEV_LOG_ERR("Callback not initialized");
> +		rte_errno = EINVAL;
> +		goto cb_err;
> +	}
> +
> +	list = &dev->enq_cbs[qp_id];
> +	if (list == NULL) {
> +		CDEV_LOG_ERR("Callback list is NULL");
> +		rte_errno = EINVAL;
> +		goto cb_err;
> +	}
> +
> +	if (list->qsbr == NULL) {
> +		CDEV_LOG_ERR("Rcu qsbr is NULL");
> +		rte_errno = EINVAL;
> +		goto cb_err;
> +	}
> +
> +	prev_cb = &list->next;
> +	for (; *prev_cb != NULL; prev_cb = &curr_cb->next) {
> +		curr_cb = *prev_cb;
> +		if (curr_cb == cb) {
> +			/* Remove the user cb from the callback list. */
> +			__atomic_store_n(prev_cb, curr_cb->next,
> +				__ATOMIC_RELAXED);
> +			ret = 0;
> +			break;
> +		}
> +	}
> +
> +	if (!ret) {
> +		/* Call sync with invalid thread id as this is part of
> +		 * control plane API
> +		 */
> +		rte_rcu_qsbr_synchronize(list->qsbr, RTE_QSBR_THRID_INVALID);
> +		rte_free(cb);
> +	}
> +
> +cb_err:
> +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> +	return ret;
> +}
> +
> +struct rte_cryptodev_cb *
> +rte_cryptodev_add_deq_callback(uint8_t dev_id,
> +			       uint16_t qp_id,
> +			       rte_cryptodev_callback_fn cb_fn,
> +			       void *cb_arg)
> +{
> +	struct rte_cryptodev *dev;
> +	struct rte_cryptodev_cb_rcu *list;
> +	struct rte_cryptodev_cb *cb, *tail;
> +
> +	if (!cb_fn) {
> +		CDEV_LOG_ERR("Callback is NULL on dev_id=%d", dev_id);
> +		rte_errno = EINVAL;
> +		return NULL;
> +	}
> +
> +	if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> +		CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> +		rte_errno = ENODEV;
> +		return NULL;
> +	}
> +
> +	dev = &rte_crypto_devices[dev_id];
> +	if (qp_id >= dev->data->nb_queue_pairs) {
> +		CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> +		rte_errno = ENODEV;
> +		return NULL;
> +	}
> +
> +	cb = rte_zmalloc(NULL, sizeof(*cb), 0);
> +	if (cb == NULL) {
> +		CDEV_LOG_ERR("Failed to allocate memory for callback on "
> +			     "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> +		rte_errno = ENOMEM;
> +		return NULL;
> +	}
> +
> +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> +
> +	cb->fn = cb_fn;
> +	cb->arg = cb_arg;
> +
> +	/* Add the callbacks in fifo order. */
> +	list = &dev->deq_cbs[qp_id];
> +	tail = list->next;
> +
> +	if (tail) {
> +		while (tail->next)
> +			tail = tail->next;
> +		/* Stores to cb->fn and cb->param should complete before
> +		 * cb is visible to data plane.
> +		 */
> +		__atomic_store_n(&tail->next, cb, __ATOMIC_RELEASE);
> +	} else {
> +		/* Stores to cb->fn and cb->param should complete before
> +		 * cb is visible to data plane.
> +		 */
> +		__atomic_store_n(&list->next, cb, __ATOMIC_RELEASE);
> +	}
> +
> +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> +
> +	return cb;
> +}
> +
> +int
> +rte_cryptodev_remove_deq_callback(uint8_t dev_id,
> +				  uint16_t qp_id,
> +				  struct rte_cryptodev_cb *cb)
> +{
> +	struct rte_cryptodev *dev;
> +	struct rte_cryptodev_cb **prev_cb, *curr_cb;
> +	struct rte_cryptodev_cb_rcu *list;
> +	int ret;
> +
> +	ret = -EINVAL;
> +
> +	if (!cb) {
> +		CDEV_LOG_ERR("Callback is NULL");
> +		rte_errno = EINVAL;
> +		return -EINVAL;
> +	}
> +
> +	if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> +		CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> +		rte_errno = ENODEV;
> +		return -ENODEV;
> +	}
> +
> +	dev = &rte_crypto_devices[dev_id];
> +	if (qp_id >= dev->data->nb_queue_pairs) {
> +		CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> +		rte_errno = ENODEV;
> +		return -ENODEV;
> +	}
> +
> +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> +	if (dev->enq_cbs == NULL) {
> +		CDEV_LOG_ERR("Callback not initialized");
> +		rte_errno = EINVAL;
> +		goto cb_err;
> +	}
> +
> +	list = &dev->deq_cbs[qp_id];
> +	if (list == NULL) {
> +		CDEV_LOG_ERR("Callback list is NULL");
> +		rte_errno = EINVAL;
> +		goto cb_err;
> +	}
> +
> +	if (list->qsbr == NULL) {
> +		CDEV_LOG_ERR("Rcu qsbr is NULL");
> +		rte_errno = EINVAL;
> +		goto cb_err;
> +	}
> +
> +	prev_cb = &list->next;
> +	for (; *prev_cb != NULL; prev_cb = &curr_cb->next) {
> +		curr_cb = *prev_cb;
> +		if (curr_cb == cb) {
> +			/* Remove the user cb from the callback list. */
> +			__atomic_store_n(prev_cb, curr_cb->next,
> +				__ATOMIC_RELAXED);
> +			ret = 0;
> +			break;
> +		}
> +	}
> +
> +	if (!ret) {
> +		/* Call sync with invalid thread id as this is part of
> +		 * control plane API
> +		 */
> +		rte_rcu_qsbr_synchronize(list->qsbr, RTE_QSBR_THRID_INVALID);
> +		rte_free(cb);
> +	}
> +
> +cb_err:
> +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> +	return ret;
> +}
> +#endif
> 
>  int
>  rte_cryptodev_stats_get(uint8_t dev_id, struct rte_cryptodev_stats *stats)
> diff --git a/lib/librte_cryptodev/rte_cryptodev.h b/lib/librte_cryptodev/rte_cryptodev.h
> index 0935fd5..3477a37 100644
> --- a/lib/librte_cryptodev/rte_cryptodev.h
> +++ b/lib/librte_cryptodev/rte_cryptodev.h
> @@ -23,6 +23,7 @@
>  #include "rte_dev.h"
>  #include <rte_common.h>
>  #include <rte_config.h>
> +#include <rte_rcu_qsbr.h>
> 
>  #include "rte_cryptodev_trace_fp.h"
> 
> @@ -522,6 +523,32 @@ struct rte_cryptodev_qp_conf {
>  	/**< The mempool for creating sess private data in sessionless mode */
>  };
> 
> +#ifdef RTE_CRYPTO_CALLBACKS
> +/**
> + * Function type used for processing crypto ops when enqueue/dequeue burst is
> + * called.
> + *
> + * The callback function is called on enqueue/dequeue burst immediately.
> + *
> + * @param	dev_id		The identifier of the device.
> + * @param	qp_id		The index of the queue pair on which ops are
> + *				enqueued/dequeued. The value must be in the
> + *				range [0, nb_queue_pairs - 1] previously
> + *				supplied to *rte_cryptodev_configure*.
> + * @param	ops		The address of an array of *nb_ops* pointers
> + *				to *rte_crypto_op* structures which contain
> + *				the crypto operations to be processed.
> + * @param	nb_ops		The number of operations to process.
> + * @param	user_param	The arbitrary user parameter passed in by the
> + *				application when the callback was originally
> + *				registered.
> + * @return			The number of ops to be enqueued to the
> + *				crypto device.
> + */
> +typedef uint16_t (*rte_cryptodev_callback_fn)(uint16_t dev_id, uint16_t qp_id,
> +		struct rte_crypto_op **ops, uint16_t nb_ops, void *user_param);
> +#endif
> +
>  /**
>   * Typedef for application callback function to be registered by application
>   * software for notification of device events
> @@ -822,7 +849,6 @@ struct rte_cryptodev_config {
>  		enum rte_cryptodev_event_type event,
>  		rte_cryptodev_cb_fn cb_fn, void *cb_arg);
> 
> -
>  typedef uint16_t (*dequeue_pkt_burst_t)(void *qp,
>  		struct rte_crypto_op **ops,	uint16_t nb_ops);
>  /**< Dequeue processed packets from queue pair of a device. */
> @@ -839,6 +865,33 @@ typedef uint16_t (*enqueue_pkt_burst_t)(void *qp,
>  /** Structure to keep track of registered callbacks */
>  TAILQ_HEAD(rte_cryptodev_cb_list, rte_cryptodev_callback);
> 
> +#ifdef RTE_CRYPTO_CALLBACKS
> +/**
> + * @internal
> + * Structure used to hold information about the callbacks to be called for a
> + * queue pair on enqueue/dequeue.
> + */
> +struct rte_cryptodev_cb {
> +	struct rte_cryptodev_cb *next;
> +	/** < Pointer to next callback */
> +	rte_cryptodev_callback_fn fn;
> +	/** < Pointer to callback function */
> +	void *arg;
> +	/** < Pointer to argument */
> +};
> +
> +/**
> + * @internal
> + * Structure used to hold information about the RCU for a queue pair.
> + */
> +struct rte_cryptodev_cb_rcu {
> +	struct rte_cryptodev_cb *next;
> +	/** < Pointer to next callback */
> +	struct rte_rcu_qsbr *qsbr;
> +	/** < RCU QSBR variable per queue pair */
> +};
> +#endif
> +
>  /** The data structure associated with each crypto device. */
>  struct rte_cryptodev {
>  	dequeue_pkt_burst_t dequeue_burst;
> @@ -867,6 +920,12 @@ struct rte_cryptodev {
>  	__extension__
>  	uint8_t attached : 1;
>  	/**< Flag indicating the device is attached */
> +
> +	struct rte_cryptodev_cb_rcu *enq_cbs;
> +	/**< User application callback for pre enqueue processing */
> +
> +	struct rte_cryptodev_cb_rcu *deq_cbs;
> +	/**< User application callback for post dequeue processing */
>  } __rte_cache_aligned;
> 
>  void *
> @@ -945,6 +1004,30 @@ struct rte_cryptodev_data {
>  {
>  	struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
> 
> +#ifdef RTE_CRYPTO_CALLBACKS
> +	if (unlikely(dev->deq_cbs != NULL)) {
> +		struct rte_cryptodev_cb_rcu *list;
> +		struct rte_cryptodev_cb *cb;
> +
> +		/* __ATOMIC_RELEASE memory order was used when the
> +		 * call back was inserted into the list.
> +		 * Since there is a clear dependency between loading
> +		 * cb and cb->fn/cb->next, __ATOMIC_ACQUIRE memory order is
> +		 * not required.
> +		 */
> +		list = &dev->deq_cbs[qp_id];
> +		rte_rcu_qsbr_thread_online(list->qsbr, 0);
> +		cb = __atomic_load_n(&list->next, __ATOMIC_RELAXED);
> +
> +		while (cb != NULL) {
> +			nb_ops = cb->fn(dev_id, qp_id, ops, nb_ops,
> +					cb->arg);
> +			cb = cb->next;
> +		};
> +
> +		rte_rcu_qsbr_thread_offline(list->qsbr, 0);
> +	}
> +#endif
>  	nb_ops = (*dev->dequeue_burst)
>  			(dev->data->queue_pairs[qp_id], ops, nb_ops);
> 
> @@ -989,6 +1072,31 @@ struct rte_cryptodev_data {
>  {
>  	struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
> 
> +#ifdef RTE_CRYPTO_CALLBACKS
> +	if (unlikely(dev->enq_cbs != NULL)) {
> +		struct rte_cryptodev_cb_rcu *list;
> +		struct rte_cryptodev_cb *cb;
> +
> +		/* __ATOMIC_RELEASE memory order was used when the
> +		 * call back was inserted into the list.
> +		 * Since there is a clear dependency between loading
> +		 * cb and cb->fn/cb->next, __ATOMIC_ACQUIRE memory order is
> +		 * not required.
> +		 */
> +		list = &dev->enq_cbs[qp_id];
> +		rte_rcu_qsbr_thread_online(list->qsbr, 0);
> +		cb = __atomic_load_n(&list->next, __ATOMIC_RELAXED);
> +
> +		while (cb != NULL) {
> +			nb_ops = cb->fn(dev_id, qp_id, ops, nb_ops,
> +					cb->arg);
> +			cb = cb->next;
> +		};
> +
> +		rte_rcu_qsbr_thread_offline(list->qsbr, 0);
> +	}
> +#endif
> +
>  	rte_cryptodev_trace_enqueue_burst(dev_id, qp_id, (void **)ops, nb_ops);
>  	return (*dev->enqueue_burst)(
>  			dev->data->queue_pairs[qp_id], ops, nb_ops);
> @@ -1730,6 +1838,156 @@ struct rte_crypto_raw_dp_ctx {
>  rte_cryptodev_raw_dequeue_done(struct rte_crypto_raw_dp_ctx *ctx,
>  		uint32_t n);
> 
> +#ifdef RTE_CRYPTO_CALLBACKS
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Add a user callback for a given crypto device and queue pair which will be
> + * called on crypto ops enqueue.
> + *
> + * This API configures a function to be called for each burst of crypto ops
> + * received on a given crypto device queue pair. The return value is a pointer
> + * that can be used later to remove the callback using
> + * rte_cryptodev_remove_enq_callback().
> + *
> + * Callbacks registered by application would not survive
> + * rte_cryptodev_configure() as it reinitializes the callback list.
> + * It is user responsibility to remove all installed callbacks before
> + * calling rte_cryptodev_configure() to avoid possible memory leakage.
> + * Application is expected to call add API after rte_cryptodev_configure().
> + *
> + * Multiple functions can be registered per queue pair & they are called
> + * in the order they were added. The API does not restrict on maximum number
> + * of callbacks.
> + *
> + * @param	dev_id		The identifier of the device.
> + * @param	qp_id		The index of the queue pair on which ops are
> + *				to be enqueued for processing. The value
> + *				must be in the range [0, nb_queue_pairs - 1]
> + *				previously supplied to
> + *				*rte_cryptodev_configure*.
> + * @param	cb_fn		The callback function
> + * @param	cb_arg		A generic pointer parameter which will be passed
> + *				to each invocation of the callback function on
> + *				this crypto device and queue pair.
> + *
> + * @return
> + *   NULL on error.

Need to add that rte_errno will contain error code.

> + *   On success, a pointer value which can later be used to remove the callback.
> + */
> +
> +__rte_experimental
> +struct rte_cryptodev_cb *
> +rte_cryptodev_add_enq_callback(uint8_t dev_id,
> +			       uint16_t qp_id,
> +			       rte_cryptodev_callback_fn cb_fn,
> +			       void *cb_arg);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Remove a user callback function for given crypto device and queue pair.
> + *
> + * This function is used to remove enqueue callbacks that were added to a
> + * crypto device queue pair using rte_cryptodev_add_enq_callback().
> + *
> + *
> + *
> + * @param	dev_id		The identifier of the device.
> + * @param	qp_id		The index of the queue pair on which ops are
> + *				to be enqueued. The value must be in the
> + *				range [0, nb_queue_pairs - 1] previously
> + *				supplied to *rte_cryptodev_configure*.
> + * @param	cb		Pointer to user supplied callback created via
> + *				rte_cryptodev_add_enq_callback().
> + *
> + * @return
> + *   - 0: Success. Callback was removed.
> + *   - -EINVAL:  The dev_id or the qp_id is out of range, or the callback
> + *               is NULL or not found for the crypto device queue pair.
> + */
> +
> +__rte_experimental
> +int rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> +				      uint16_t qp_id,
> +				      struct rte_cryptodev_cb *cb);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Add a user callback for a given crypto device and queue pair which will be
> + * called on crypto ops dequeue.
> + *
> + * This API configures a function to be called for each burst of crypto ops
> + * received on a given crypto device queue pair. The return value is a pointer
> + * that can be used later to remove the callback using
> + * rte_cryptodev_remove_deq_callback().
> + *
> + * Callbacks registered by application would not survive
> + * rte_cryptodev_configure() as it reinitializes the callback list.
> + * It is user responsibility to remove all installed callbacks before
> + * calling rte_cryptodev_configure() to avoid possible memory leakage.
> + * Application is expected to call add API after rte_cryptodev_configure().
> + *
> + * Multiple functions can be registered per queue pair & they are called
> + * in the order they were added. The API does not restrict on maximum number
> + * of callbacks.
> + *
> + * @param	dev_id		The identifier of the device.
> + * @param	qp_id		The index of the queue pair on which ops are
> + *				to be dequeued. The value must be in the
> + *				range [0, nb_queue_pairs - 1] previously
> + *				supplied to *rte_cryptodev_configure*.
> + * @param	cb_fn		The callback function
> + * @param	cb_arg		A generic pointer parameter which will be passed
> + *				to each invocation of the callback function on
> + *				this crypto device and queue pair.
> + *
> + * @return
> + *   NULL on error.
> + *   On success, a pointer value which can later be used to remove the callback.
> + */
> +
> +__rte_experimental
> +struct rte_cryptodev_cb *
> +rte_cryptodev_add_deq_callback(uint8_t dev_id,
> +			       uint16_t qp_id,
> +			       rte_cryptodev_callback_fn cb_fn,
> +			       void *cb_arg);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Remove a user callback function for given crypto device and queue pair.
> + *
> + * This function is used to remove dequeue callbacks that were added to a
> + * crypto device queue pair using rte_cryptodev_add_deq_callback().
> + *
> + *
> + *
> + * @param	dev_id		The identifier of the device.
> + * @param	qp_id		The index of the queue pair on which ops are
> + *				to be dequeued. The value must be in the
> + *				range [0, nb_queue_pairs - 1] previously
> + *				supplied to *rte_cryptodev_configure*.
> + * @param	cb		Pointer to user supplied callback created via
> + *				rte_cryptodev_add_deq_callback().
> + *
> + * @return
> + *   - 0: Success. Callback was removed.
> + *   - -EINVAL:  The dev_id or the qp_id is out of range, or the callback
> + *               is NULL or not found for the crypto device queue pair.
> + */
> +__rte_experimental
> +int rte_cryptodev_remove_deq_callback(uint8_t dev_id,
> +				      uint16_t qp_id,
> +				      struct rte_cryptodev_cb *cb);
> +#endif
> +
>  #ifdef __cplusplus
>  }
>  #endif
> diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map b/lib/librte_cryptodev/rte_cryptodev_version.map
> index 7e4360f..429b03e 100644
> --- a/lib/librte_cryptodev/rte_cryptodev_version.map
> +++ b/lib/librte_cryptodev/rte_cryptodev_version.map
> @@ -101,6 +101,8 @@ EXPERIMENTAL {
>  	rte_cryptodev_get_qp_status;
> 
>  	# added in 20.11
> +	rte_cryptodev_add_deq_callback;
> +	rte_cryptodev_add_enq_callback;
>  	rte_cryptodev_configure_raw_dp_ctx;
>  	rte_cryptodev_get_raw_dp_ctx_size;
>  	rte_cryptodev_raw_dequeue;
> @@ -109,4 +111,6 @@ EXPERIMENTAL {
>  	rte_cryptodev_raw_enqueue;
>  	rte_cryptodev_raw_enqueue_burst;
>  	rte_cryptodev_raw_enqueue_done;
> +	rte_cryptodev_remove_deq_callback;
> +	rte_cryptodev_remove_enq_callback;
>  };
> --
> 1.9.1
  

> -----Original Message-----
> From: Ananyev, Konstantin <konstantin.ananyev@intel.com>
> Sent: Wednesday, October 28, 2020 6:56 PM
> To: Gujjar, Abhinandan S <abhinandan.gujjar@intel.com>; dev@dpdk.org;
> Doherty, Declan <declan.doherty@intel.com>; akhil.goyal@nxp.com;
> Honnappa.Nagarahalli@arm.com
> Cc: Vangati, Narender <narender.vangati@intel.com>; jerinj@marvell.com
> Subject: RE: [v5 1/2] cryptodev: support enqueue & dequeue callback functions
> 
> 
> > This patch adds APIs to add/remove callback functions on crypto
> > enqueue/dequeue burst. The callback function will be called for each
> > burst of crypto ops received on a given crypto device queue pair.
> >
> > Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
> > Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> > ---
> >  config/rte_config.h                            |   1 +
> >  doc/guides/prog_guide/cryptodev_lib.rst        |  47 +++
> >  doc/guides/rel_notes/release_20_11.rst         |   6 +
> >  lib/librte_cryptodev/meson.build               |   2 +-
> >  lib/librte_cryptodev/rte_cryptodev.c           | 419
> ++++++++++++++++++++++++-
> >  lib/librte_cryptodev/rte_cryptodev.h           | 260 ++++++++++++++-
> >  lib/librte_cryptodev/rte_cryptodev_version.map |   4 +
> >  7 files changed, 736 insertions(+), 3 deletions(-)
> >
> > diff --git a/config/rte_config.h b/config/rte_config.h index
> > 03d90d7..e999d93 100644
> > --- a/config/rte_config.h
> > +++ b/config/rte_config.h
> > @@ -61,6 +61,7 @@
> >  /* cryptodev defines */
> >  #define RTE_CRYPTO_MAX_DEVS 64
> >  #define RTE_CRYPTODEV_NAME_LEN 64
> > +#define RTE_CRYPTO_CALLBACKS 1
> >
> >  /* compressdev defines */
> >  #define RTE_COMPRESS_MAX_DEVS 64
> > diff --git a/doc/guides/prog_guide/cryptodev_lib.rst
> > b/doc/guides/prog_guide/cryptodev_lib.rst
> > index 72129e4..9d0ff59 100644
> > --- a/doc/guides/prog_guide/cryptodev_lib.rst
> > +++ b/doc/guides/prog_guide/cryptodev_lib.rst
> > @@ -338,6 +338,53 @@ start of private data information. The offset is
> > counted from the start of the  rte_crypto_op including other crypto
> > information such as the IVs (since there can  be an IV also for authentication).
> >
> > +User callback APIs
> > +~~~~~~~~~~~~~~~~~~
> > +The add APIs configures a user callback function to be called for
> > +each burst of crypto ops received/sent on a given crypto device queue
> > +pair. The return value is a pointer that can be used later to remove
> > +the callback API. Application is expected to register a callback
> > +function of type ``rte_cryptodev_callback_fn``. Multiple callback
> > +functions can be added for a given queue pair. API does not restrict on
> maximum number of callbacks.
> > +
> > +Callbacks registered by application would not survive
> > +rte_cryptodev_configure() as it reinitializes the callback list. It
> > +is user responsibility to remove all installed callbacks before calling
> rte_cryptodev_configure() to avoid possible memory leakage.
> > +
> > +So, application is expected to add user callback after
> rte_cryptodev_configure().
> > +The callbacks can also be added at the runtime. These callbacks get
> > +executed when
> ``rte_cryptodev_enqueue_burst``/``rte_cryptodev_dequeue_burst`` is called.
> > +
> > +.. code-block:: c
> > +
> > +   struct rte_cryptodev_cb *
> > +	rte_cryptodev_add_enq_callback(uint8_t dev_id,
> > +				       uint16_t qp_id,
> > +				       rte_cryptodev_callback_fn cb_fn,
> > +				       void *cb_arg);
> > +
> > +   struct rte_cryptodev_cb *
> > +	rte_cryptodev_add_deq_callback(uint8_t dev_id,
> > +				       uint16_t qp_id,
> > +				       rte_cryptodev_callback_fn cb_fn,
> > +				       void *cb_arg);
> > +
> > +	uint16_t (*rte_cryptodev_callback_fn)(uint16_t dev_id, uint16_t qp_id,
> > +		struct rte_crypto_op **ops, uint16_t nb_ops, void
> *user_param);
> > +
> > +The remove API removes a callback function added by
> > +``rte_cryptodev_add_enq_callback``/``rte_cryptodev_add_deq_callback''.
> > +
> > +.. code-block:: c
> > +
> > +	int rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> > +					      uint16_t qp_id,
> > +				              struct rte_cryptodev_cb *cb);
> > +
> > +	int rte_cryptodev_remove_deq_callback(uint8_t dev_id,
> > +					      uint16_t qp_id,
> > +				              struct rte_cryptodev_cb *cb);
> > +
> >
> >  Enqueue / Dequeue Burst APIs
> >  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > diff --git a/doc/guides/rel_notes/release_20_11.rst
> > b/doc/guides/rel_notes/release_20_11.rst
> > index 48717ee..d12fb31 100644
> > --- a/doc/guides/rel_notes/release_20_11.rst
> > +++ b/doc/guides/rel_notes/release_20_11.rst
> > @@ -174,6 +174,12 @@ New Features
> >    enqueue/dequeue operations but does not necessarily depends on
> >    mbufs and cryptodev operation mempools.
> >
> > +* **Added enqueue & dequeue callback APIs for cryptodev library.**
> > +
> > +  Cryptodev libray is added with enqueue & dequeue callback APIs to
> > + enable applications to add/remove user callbacks which gets called
> > + for every enqueue/dequeue operation.
> > +
> >  * **Updated the aesni_mb crypto PMD.**
> >
> >    * Added support for AES-ECB 128, 192 and 256.
> > diff --git a/lib/librte_cryptodev/meson.build
> > b/lib/librte_cryptodev/meson.build
> > index c4c6b3b..8c5493f 100644
> > --- a/lib/librte_cryptodev/meson.build
> > +++ b/lib/librte_cryptodev/meson.build
> > @@ -9,4 +9,4 @@ headers = files('rte_cryptodev.h',
> >  	'rte_crypto.h',
> >  	'rte_crypto_sym.h',
> >  	'rte_crypto_asym.h')
> > -deps += ['kvargs', 'mbuf']
> > +deps += ['kvargs', 'mbuf', 'rcu']
> > diff --git a/lib/librte_cryptodev/rte_cryptodev.c
> > b/lib/librte_cryptodev/rte_cryptodev.c
> > index 3d95ac6..677c2ef 100644
> > --- a/lib/librte_cryptodev/rte_cryptodev.c
> > +++ b/lib/librte_cryptodev/rte_cryptodev.c
> > @@ -448,6 +448,127 @@ struct
> rte_cryptodev_sym_session_pool_private_data {
> >  	return 0;
> >  }
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +/* spinlock for crypto device enq callbacks */ static rte_spinlock_t
> > +rte_cryptodev_callback_lock = RTE_SPINLOCK_INITIALIZER;
> > +
> > +static void
> > +cryptodev_cb_cleanup(struct rte_cryptodev *dev) {
> > +	struct rte_cryptodev_cb_rcu *list;
> > +	struct rte_cryptodev_cb *cb, *next;
> > +	uint16_t qp_id;
> > +
> > +	if (dev->enq_cbs == NULL && dev->deq_cbs == NULL)
> > +		return;
> > +
> > +	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> > +		list = &dev->enq_cbs[qp_id];
> > +		cb = list->next;
> > +		while (cb != NULL) {
> > +			next = cb->next;
> > +			rte_free(cb);
> > +			cb = next;
> > +		}
> > +
> > +		rte_free(list->qsbr);
> > +	}
> > +
> > +	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> > +		list = &dev->deq_cbs[qp_id];
> > +		cb = list->next;
> > +		while (cb != NULL) {
> > +			next = cb->next;
> > +			rte_free(cb);
> > +			cb = next;
> > +		}
> > +
> > +		rte_free(list->qsbr);
> > +	}
> > +
> > +	rte_free(dev->enq_cbs);
> > +	dev->enq_cbs = NULL;
> > +	rte_free(dev->deq_cbs);
> > +	dev->deq_cbs = NULL;
> > +}
> > +
> > +static int
> > +cryptodev_cb_init(struct rte_cryptodev *dev) {
> > +	struct rte_cryptodev_cb_rcu *list;
> > +	struct rte_rcu_qsbr *qsbr;
> > +	uint16_t qp_id;
> > +	size_t size;
> > +
> > +	/* Max thread set to 1, as one DP thread accessing a queue-pair */
> > +	const uint32_t max_threads = 1;
> > +
> > +	dev->enq_cbs = rte_zmalloc(NULL,
> > +				   sizeof(struct rte_cryptodev_cb_rcu) *
> > +				   dev->data->nb_queue_pairs, 0);
> > +	if (dev->enq_cbs == NULL) {
> > +		CDEV_LOG_ERR("Failed to allocate memory for enq
> callbacks");
> > +		rte_errno = ENOMEM;
> 
> As a nit - if this function returns an error code as return value, no point to
> update rte_errno too.
Ok
> 
> > +		return -ENOMEM;
> > +	}
> > +
> > +	dev->deq_cbs = rte_zmalloc(NULL,
> > +				   sizeof(struct rte_cryptodev_cb_rcu) *
> > +				   dev->data->nb_queue_pairs, 0);
> > +	if (dev->deq_cbs == NULL) {
> > +		CDEV_LOG_ERR("Failed to allocate memory for deq
> callbacks");
> > +		rte_free(dev->enq_cbs);
> > +		rte_errno = ENOMEM;
> > +		return -ENOMEM;
> > +	}
> > +
> > +	/* Create RCU QSBR variable */
> > +	size = rte_rcu_qsbr_get_memsize(max_threads);
> > +
> > +	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> > +		list = &dev->enq_cbs[qp_id];
> > +		qsbr = rte_zmalloc(NULL, size, RTE_CACHE_LINE_SIZE);
> > +		if (qsbr == NULL) {
> > +			CDEV_LOG_ERR("Failed to allocate memory for RCU
> on "
> > +				"queue_pair_id=%d", qp_id);
> > +			goto cb_init_err;
> > +		}
> > +
> > +		if (rte_rcu_qsbr_init(qsbr, max_threads)) {
> > +			CDEV_LOG_ERR("Failed to initialize for RCU on "
> > +				"queue_pair_id=%d", qp_id);
> > +			goto cb_init_err;
> > +		}
> > +
> > +		list->qsbr = qsbr;
> > +	}
> > +
> > +	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> > +		list = &dev->deq_cbs[qp_id];
> > +		qsbr = rte_zmalloc(NULL, size, RTE_CACHE_LINE_SIZE);
> > +		if (qsbr == NULL) {
> > +			CDEV_LOG_ERR("Failed to allocate memory for RCU
> on "
> > +				"queue_pair_id=%d", qp_id);
> > +			goto cb_init_err;
> > +		}
> > +
> > +		if (rte_rcu_qsbr_init(qsbr, max_threads)) {
> > +			CDEV_LOG_ERR("Failed to initialize for RCU on "
> > +				"queue_pair_id=%d", qp_id);
> > +			goto cb_init_err;
> > +		}
> > +
> > +		list->qsbr = qsbr;
> > +	}
> > +
> > +	return 0;
> > +
> > +cb_init_err:
> > +	cryptodev_cb_cleanup(dev);
> > +	rte_errno = ENOMEM;
> 
> Same here - no need to update rte_errno.
Ok
> 
> > +	return -ENOMEM;
> > +}
> > +#endif
> >
> >  const char *
> >  rte_cryptodev_get_feature_name(uint64_t flag) @@ -927,6 +1048,11 @@
> > struct rte_cryptodev *
> >
> >  	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -
> ENOTSUP);
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> > +	cryptodev_cb_cleanup(dev);
> > +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> > +#endif
> >  	/* Setup new number of queue pairs and reconfigure device. */
> >  	diag = rte_cryptodev_queue_pairs_config(dev, config-
> >nb_queue_pairs,
> >  			config->socket_id);
> > @@ -936,11 +1062,19 @@ struct rte_cryptodev *
> >  		return diag;
> >  	}
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> > +	diag = cryptodev_cb_init(dev);
> > +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> > +	if (diag) {
> > +		CDEV_LOG_ERR("Callback init failed for dev_id=%d", dev_id);
> > +		return diag;
> > +	}
> > +#endif
> >  	rte_cryptodev_trace_configure(dev_id, config);
> >  	return (*dev->dev_ops->dev_configure)(dev, config);  }
> >
> > -
> >  int
> >  rte_cryptodev_start(uint8_t dev_id)
> >  {
> > @@ -1136,6 +1270,289 @@ struct rte_cryptodev *
> >  			socket_id);
> >  }
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +struct rte_cryptodev_cb *
> > +rte_cryptodev_add_enq_callback(uint8_t dev_id,
> > +			       uint16_t qp_id,
> > +			       rte_cryptodev_callback_fn cb_fn,
> > +			       void *cb_arg)
> > +{
> > +	struct rte_cryptodev *dev;
> > +	struct rte_cryptodev_cb_rcu *list;
> > +	struct rte_cryptodev_cb *cb, *tail;
> > +
> > +	if (!cb_fn) {
> > +		CDEV_LOG_ERR("Callback is NULL on dev_id=%d", dev_id);
> > +		rte_errno = EINVAL;
> > +		return NULL;
> > +	}
> > +
> > +	if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> > +		CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> > +		rte_errno = ENODEV;
> > +		return NULL;
> > +	}
> > +
> > +	dev = &rte_crypto_devices[dev_id];
> > +	if (qp_id >= dev->data->nb_queue_pairs) {
> > +		CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> > +		rte_errno = ENODEV;
> > +		return NULL;
> > +	}
> > +
> > +	cb = rte_zmalloc(NULL, sizeof(*cb), 0);
> > +	if (cb == NULL) {
> > +		CDEV_LOG_ERR("Failed to allocate memory for callback on "
> > +			     "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> > +		rte_errno = ENOMEM;
> > +		return NULL;
> > +	}
> > +
> > +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> > +
> > +	cb->fn = cb_fn;
> > +	cb->arg = cb_arg;
> > +
> > +	/* Add the callbacks in fifo order. */
> > +	list = &dev->enq_cbs[qp_id];
> > +	tail = list->next;
> > +
> > +	if (tail) {
> > +		while (tail->next)
> > +			tail = tail->next;
> > +		/* Stores to cb->fn and cb->param should complete before
> > +		 * cb is visible to data plane.
> > +		 */
> > +		__atomic_store_n(&tail->next, cb, __ATOMIC_RELEASE);
> > +	} else {
> > +		/* Stores to cb->fn and cb->param should complete before
> > +		 * cb is visible to data plane.
> > +		 */
> > +		__atomic_store_n(&list->next, cb, __ATOMIC_RELEASE);
> > +	}
> > +
> > +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> > +
> > +	return cb;
> > +}
> > +
> > +int
> > +rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> > +				  uint16_t qp_id,
> > +				  struct rte_cryptodev_cb *cb)
> > +{
> > +	struct rte_cryptodev *dev;
> > +	struct rte_cryptodev_cb **prev_cb, *curr_cb;
> > +	struct rte_cryptodev_cb_rcu *list;
> > +	int ret;
> > +
> > +	ret = -EINVAL;
> > +
> > +	if (!cb) {
> > +		CDEV_LOG_ERR("Callback is NULL");
> > +		rte_errno = EINVAL;
> 
> Same story here - no need to update rte_errno, if we provide error code as
> return value.
Ok
> 
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> > +		CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> > +		rte_errno = ENODEV;
> > +		return -ENODEV;
> > +	}
> > +
> > +	dev = &rte_crypto_devices[dev_id];
> > +	if (qp_id >= dev->data->nb_queue_pairs) {
> > +		CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> > +		rte_errno = ENODEV;
> > +		return -ENODEV;
> > +	}
> > +
> > +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> > +	if (dev->enq_cbs == NULL) {
> > +		CDEV_LOG_ERR("Callback not initialized");
> > +		rte_errno = EINVAL;
> > +		goto cb_err;
> > +	}
> > +
> > +	list = &dev->enq_cbs[qp_id];
> > +	if (list == NULL) {
> > +		CDEV_LOG_ERR("Callback list is NULL");
> > +		rte_errno = EINVAL;
> > +		goto cb_err;
> > +	}
> > +
> > +	if (list->qsbr == NULL) {
> > +		CDEV_LOG_ERR("Rcu qsbr is NULL");
> > +		rte_errno = EINVAL;
> > +		goto cb_err;
> > +	}
> > +
> > +	prev_cb = &list->next;
> > +	for (; *prev_cb != NULL; prev_cb = &curr_cb->next) {
> > +		curr_cb = *prev_cb;
> > +		if (curr_cb == cb) {
> > +			/* Remove the user cb from the callback list. */
> > +			__atomic_store_n(prev_cb, curr_cb->next,
> > +				__ATOMIC_RELAXED);
> > +			ret = 0;
> > +			break;
> > +		}
> > +	}
> > +
> > +	if (!ret) {
> > +		/* Call sync with invalid thread id as this is part of
> > +		 * control plane API
> > +		 */
> > +		rte_rcu_qsbr_synchronize(list->qsbr,
> RTE_QSBR_THRID_INVALID);
> > +		rte_free(cb);
> > +	}
> > +
> > +cb_err:
> > +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> > +	return ret;
> > +}
> > +
> > +struct rte_cryptodev_cb *
> > +rte_cryptodev_add_deq_callback(uint8_t dev_id,
> > +			       uint16_t qp_id,
> > +			       rte_cryptodev_callback_fn cb_fn,
> > +			       void *cb_arg)
> > +{
> > +	struct rte_cryptodev *dev;
> > +	struct rte_cryptodev_cb_rcu *list;
> > +	struct rte_cryptodev_cb *cb, *tail;
> > +
> > +	if (!cb_fn) {
> > +		CDEV_LOG_ERR("Callback is NULL on dev_id=%d", dev_id);
> > +		rte_errno = EINVAL;
> > +		return NULL;
> > +	}
> > +
> > +	if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> > +		CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> > +		rte_errno = ENODEV;
> > +		return NULL;
> > +	}
> > +
> > +	dev = &rte_crypto_devices[dev_id];
> > +	if (qp_id >= dev->data->nb_queue_pairs) {
> > +		CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> > +		rte_errno = ENODEV;
> > +		return NULL;
> > +	}
> > +
> > +	cb = rte_zmalloc(NULL, sizeof(*cb), 0);
> > +	if (cb == NULL) {
> > +		CDEV_LOG_ERR("Failed to allocate memory for callback on "
> > +			     "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> > +		rte_errno = ENOMEM;
> > +		return NULL;
> > +	}
> > +
> > +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> > +
> > +	cb->fn = cb_fn;
> > +	cb->arg = cb_arg;
> > +
> > +	/* Add the callbacks in fifo order. */
> > +	list = &dev->deq_cbs[qp_id];
> > +	tail = list->next;
> > +
> > +	if (tail) {
> > +		while (tail->next)
> > +			tail = tail->next;
> > +		/* Stores to cb->fn and cb->param should complete before
> > +		 * cb is visible to data plane.
> > +		 */
> > +		__atomic_store_n(&tail->next, cb, __ATOMIC_RELEASE);
> > +	} else {
> > +		/* Stores to cb->fn and cb->param should complete before
> > +		 * cb is visible to data plane.
> > +		 */
> > +		__atomic_store_n(&list->next, cb, __ATOMIC_RELEASE);
> > +	}
> > +
> > +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> > +
> > +	return cb;
> > +}
> > +
> > +int
> > +rte_cryptodev_remove_deq_callback(uint8_t dev_id,
> > +				  uint16_t qp_id,
> > +				  struct rte_cryptodev_cb *cb)
> > +{
> > +	struct rte_cryptodev *dev;
> > +	struct rte_cryptodev_cb **prev_cb, *curr_cb;
> > +	struct rte_cryptodev_cb_rcu *list;
> > +	int ret;
> > +
> > +	ret = -EINVAL;
> > +
> > +	if (!cb) {
> > +		CDEV_LOG_ERR("Callback is NULL");
> > +		rte_errno = EINVAL;
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> > +		CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> > +		rte_errno = ENODEV;
> > +		return -ENODEV;
> > +	}
> > +
> > +	dev = &rte_crypto_devices[dev_id];
> > +	if (qp_id >= dev->data->nb_queue_pairs) {
> > +		CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> > +		rte_errno = ENODEV;
> > +		return -ENODEV;
> > +	}
> > +
> > +	rte_spinlock_lock(&rte_cryptodev_callback_lock);
> > +	if (dev->enq_cbs == NULL) {
> > +		CDEV_LOG_ERR("Callback not initialized");
> > +		rte_errno = EINVAL;
> > +		goto cb_err;
> > +	}
> > +
> > +	list = &dev->deq_cbs[qp_id];
> > +	if (list == NULL) {
> > +		CDEV_LOG_ERR("Callback list is NULL");
> > +		rte_errno = EINVAL;
> > +		goto cb_err;
> > +	}
> > +
> > +	if (list->qsbr == NULL) {
> > +		CDEV_LOG_ERR("Rcu qsbr is NULL");
> > +		rte_errno = EINVAL;
> > +		goto cb_err;
> > +	}
> > +
> > +	prev_cb = &list->next;
> > +	for (; *prev_cb != NULL; prev_cb = &curr_cb->next) {
> > +		curr_cb = *prev_cb;
> > +		if (curr_cb == cb) {
> > +			/* Remove the user cb from the callback list. */
> > +			__atomic_store_n(prev_cb, curr_cb->next,
> > +				__ATOMIC_RELAXED);
> > +			ret = 0;
> > +			break;
> > +		}
> > +	}
> > +
> > +	if (!ret) {
> > +		/* Call sync with invalid thread id as this is part of
> > +		 * control plane API
> > +		 */
> > +		rte_rcu_qsbr_synchronize(list->qsbr,
> RTE_QSBR_THRID_INVALID);
> > +		rte_free(cb);
> > +	}
> > +
> > +cb_err:
> > +	rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> > +	return ret;
> > +}
> > +#endif
> >
> >  int
> >  rte_cryptodev_stats_get(uint8_t dev_id, struct rte_cryptodev_stats
> > *stats) diff --git a/lib/librte_cryptodev/rte_cryptodev.h
> > b/lib/librte_cryptodev/rte_cryptodev.h
> > index 0935fd5..3477a37 100644
> > --- a/lib/librte_cryptodev/rte_cryptodev.h
> > +++ b/lib/librte_cryptodev/rte_cryptodev.h
> > @@ -23,6 +23,7 @@
> >  #include "rte_dev.h"
> >  #include <rte_common.h>
> >  #include <rte_config.h>
> > +#include <rte_rcu_qsbr.h>
> >
> >  #include "rte_cryptodev_trace_fp.h"
> >
> > @@ -522,6 +523,32 @@ struct rte_cryptodev_qp_conf {
> >  	/**< The mempool for creating sess private data in sessionless mode
> > */  };
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +/**
> > + * Function type used for processing crypto ops when enqueue/dequeue
> > +burst is
> > + * called.
> > + *
> > + * The callback function is called on enqueue/dequeue burst immediately.
> > + *
> > + * @param	dev_id		The identifier of the device.
> > + * @param	qp_id		The index of the queue pair on which ops are
> > + *				enqueued/dequeued. The value must be in the
> > + *				range [0, nb_queue_pairs - 1] previously
> > + *				supplied to *rte_cryptodev_configure*.
> > + * @param	ops		The address of an array of *nb_ops* pointers
> > + *				to *rte_crypto_op* structures which contain
> > + *				the crypto operations to be processed.
> > + * @param	nb_ops		The number of operations to process.
> > + * @param	user_param	The arbitrary user parameter passed in by the
> > + *				application when the callback was originally
> > + *				registered.
> > + * @return			The number of ops to be enqueued to the
> > + *				crypto device.
> > + */
> > +typedef uint16_t (*rte_cryptodev_callback_fn)(uint16_t dev_id, uint16_t
> qp_id,
> > +		struct rte_crypto_op **ops, uint16_t nb_ops, void
> *user_param);
> > +#endif
> > +
> >  /**
> >   * Typedef for application callback function to be registered by application
> >   * software for notification of device events @@ -822,7 +849,6 @@
> > struct rte_cryptodev_config {
> >  		enum rte_cryptodev_event_type event,
> >  		rte_cryptodev_cb_fn cb_fn, void *cb_arg);
> >
> > -
> >  typedef uint16_t (*dequeue_pkt_burst_t)(void *qp,
> >  		struct rte_crypto_op **ops,	uint16_t nb_ops);
> >  /**< Dequeue processed packets from queue pair of a device. */ @@
> > -839,6 +865,33 @@ typedef uint16_t (*enqueue_pkt_burst_t)(void *qp,
> >  /** Structure to keep track of registered callbacks */
> > TAILQ_HEAD(rte_cryptodev_cb_list, rte_cryptodev_callback);
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +/**
> > + * @internal
> > + * Structure used to hold information about the callbacks to be
> > +called for a
> > + * queue pair on enqueue/dequeue.
> > + */
> > +struct rte_cryptodev_cb {
> > +	struct rte_cryptodev_cb *next;
> > +	/** < Pointer to next callback */
> > +	rte_cryptodev_callback_fn fn;
> > +	/** < Pointer to callback function */
> > +	void *arg;
> > +	/** < Pointer to argument */
> > +};
> > +
> > +/**
> > + * @internal
> > + * Structure used to hold information about the RCU for a queue pair.
> > + */
> > +struct rte_cryptodev_cb_rcu {
> > +	struct rte_cryptodev_cb *next;
> > +	/** < Pointer to next callback */
> > +	struct rte_rcu_qsbr *qsbr;
> > +	/** < RCU QSBR variable per queue pair */ }; #endif
> > +
> >  /** The data structure associated with each crypto device. */  struct
> > rte_cryptodev {
> >  	dequeue_pkt_burst_t dequeue_burst;
> > @@ -867,6 +920,12 @@ struct rte_cryptodev {
> >  	__extension__
> >  	uint8_t attached : 1;
> >  	/**< Flag indicating the device is attached */
> > +
> > +	struct rte_cryptodev_cb_rcu *enq_cbs;
> > +	/**< User application callback for pre enqueue processing */
> > +
> > +	struct rte_cryptodev_cb_rcu *deq_cbs;
> > +	/**< User application callback for post dequeue processing */
> >  } __rte_cache_aligned;
> >
> >  void *
> > @@ -945,6 +1004,30 @@ struct rte_cryptodev_data {  {
> >  	struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +	if (unlikely(dev->deq_cbs != NULL)) {
> > +		struct rte_cryptodev_cb_rcu *list;
> > +		struct rte_cryptodev_cb *cb;
> > +
> > +		/* __ATOMIC_RELEASE memory order was used when the
> > +		 * call back was inserted into the list.
> > +		 * Since there is a clear dependency between loading
> > +		 * cb and cb->fn/cb->next, __ATOMIC_ACQUIRE memory order
> is
> > +		 * not required.
> > +		 */
> > +		list = &dev->deq_cbs[qp_id];
> > +		rte_rcu_qsbr_thread_online(list->qsbr, 0);
> > +		cb = __atomic_load_n(&list->next, __ATOMIC_RELAXED);
> > +
> > +		while (cb != NULL) {
> > +			nb_ops = cb->fn(dev_id, qp_id, ops, nb_ops,
> > +					cb->arg);
> > +			cb = cb->next;
> > +		};
> > +
> > +		rte_rcu_qsbr_thread_offline(list->qsbr, 0);
> > +	}
> > +#endif
> >  	nb_ops = (*dev->dequeue_burst)
> >  			(dev->data->queue_pairs[qp_id], ops, nb_ops);
> >
> > @@ -989,6 +1072,31 @@ struct rte_cryptodev_data {  {
> >  	struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +	if (unlikely(dev->enq_cbs != NULL)) {
> > +		struct rte_cryptodev_cb_rcu *list;
> > +		struct rte_cryptodev_cb *cb;
> > +
> > +		/* __ATOMIC_RELEASE memory order was used when the
> > +		 * call back was inserted into the list.
> > +		 * Since there is a clear dependency between loading
> > +		 * cb and cb->fn/cb->next, __ATOMIC_ACQUIRE memory order
> is
> > +		 * not required.
> > +		 */
> > +		list = &dev->enq_cbs[qp_id];
> > +		rte_rcu_qsbr_thread_online(list->qsbr, 0);
> > +		cb = __atomic_load_n(&list->next, __ATOMIC_RELAXED);
> > +
> > +		while (cb != NULL) {
> > +			nb_ops = cb->fn(dev_id, qp_id, ops, nb_ops,
> > +					cb->arg);
> > +			cb = cb->next;
> > +		};
> > +
> > +		rte_rcu_qsbr_thread_offline(list->qsbr, 0);
> > +	}
> > +#endif
> > +
> >  	rte_cryptodev_trace_enqueue_burst(dev_id, qp_id, (void **)ops,
> nb_ops);
> >  	return (*dev->enqueue_burst)(
> >  			dev->data->queue_pairs[qp_id], ops, nb_ops); @@ -
> 1730,6 +1838,156
> > @@ struct rte_crypto_raw_dp_ctx {
> > rte_cryptodev_raw_dequeue_done(struct rte_crypto_raw_dp_ctx *ctx,
> >  		uint32_t n);
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * Add a user callback for a given crypto device and queue pair which
> > +will be
> > + * called on crypto ops enqueue.
> > + *
> > + * This API configures a function to be called for each burst of
> > +crypto ops
> > + * received on a given crypto device queue pair. The return value is
> > +a pointer
> > + * that can be used later to remove the callback using
> > + * rte_cryptodev_remove_enq_callback().
> > + *
> > + * Callbacks registered by application would not survive
> > + * rte_cryptodev_configure() as it reinitializes the callback list.
> > + * It is user responsibility to remove all installed callbacks before
> > + * calling rte_cryptodev_configure() to avoid possible memory leakage.
> > + * Application is expected to call add API after rte_cryptodev_configure().
> > + *
> > + * Multiple functions can be registered per queue pair & they are
> > +called
> > + * in the order they were added. The API does not restrict on maximum
> > +number
> > + * of callbacks.
> > + *
> > + * @param	dev_id		The identifier of the device.
> > + * @param	qp_id		The index of the queue pair on which ops are
> > + *				to be enqueued for processing. The value
> > + *				must be in the range [0, nb_queue_pairs - 1]
> > + *				previously supplied to
> > + *				*rte_cryptodev_configure*.
> > + * @param	cb_fn		The callback function
> > + * @param	cb_arg		A generic pointer parameter which will be
> passed
> > + *				to each invocation of the callback function on
> > + *				this crypto device and queue pair.
> > + *
> > + * @return
> > + *   NULL on error.
> 
> Need to add that rte_errno will contain error code.
Ok
> 
> > + *   On success, a pointer value which can later be used to remove the
> callback.
> > + */
> > +
> > +__rte_experimental
> > +struct rte_cryptodev_cb *
> > +rte_cryptodev_add_enq_callback(uint8_t dev_id,
> > +			       uint16_t qp_id,
> > +			       rte_cryptodev_callback_fn cb_fn,
> > +			       void *cb_arg);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * Remove a user callback function for given crypto device and queue pair.
> > + *
> > + * This function is used to remove enqueue callbacks that were added
> > +to a
> > + * crypto device queue pair using rte_cryptodev_add_enq_callback().
> > + *
> > + *
> > + *
> > + * @param	dev_id		The identifier of the device.
> > + * @param	qp_id		The index of the queue pair on which ops are
> > + *				to be enqueued. The value must be in the
> > + *				range [0, nb_queue_pairs - 1] previously
> > + *				supplied to *rte_cryptodev_configure*.
> > + * @param	cb		Pointer to user supplied callback created via
> > + *				rte_cryptodev_add_enq_callback().
> > + *
> > + * @return
> > + *   - 0: Success. Callback was removed.
> > + *   - -EINVAL:  The dev_id or the qp_id is out of range, or the callback
> > + *               is NULL or not found for the crypto device queue pair.
> > + */
> > +
> > +__rte_experimental
> > +int rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> > +				      uint16_t qp_id,
> > +				      struct rte_cryptodev_cb *cb);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * Add a user callback for a given crypto device and queue pair which
> > +will be
> > + * called on crypto ops dequeue.
> > + *
> > + * This API configures a function to be called for each burst of
> > +crypto ops
> > + * received on a given crypto device queue pair. The return value is
> > +a pointer
> > + * that can be used later to remove the callback using
> > + * rte_cryptodev_remove_deq_callback().
> > + *
> > + * Callbacks registered by application would not survive
> > + * rte_cryptodev_configure() as it reinitializes the callback list.
> > + * It is user responsibility to remove all installed callbacks before
> > + * calling rte_cryptodev_configure() to avoid possible memory leakage.
> > + * Application is expected to call add API after rte_cryptodev_configure().
> > + *
> > + * Multiple functions can be registered per queue pair & they are
> > +called
> > + * in the order they were added. The API does not restrict on maximum
> > +number
> > + * of callbacks.
> > + *
> > + * @param	dev_id		The identifier of the device.
> > + * @param	qp_id		The index of the queue pair on which ops are
> > + *				to be dequeued. The value must be in the
> > + *				range [0, nb_queue_pairs - 1] previously
> > + *				supplied to *rte_cryptodev_configure*.
> > + * @param	cb_fn		The callback function
> > + * @param	cb_arg		A generic pointer parameter which will be
> passed
> > + *				to each invocation of the callback function on
> > + *				this crypto device and queue pair.
> > + *
> > + * @return
> > + *   NULL on error.
> > + *   On success, a pointer value which can later be used to remove the
> callback.
> > + */
> > +
> > +__rte_experimental
> > +struct rte_cryptodev_cb *
> > +rte_cryptodev_add_deq_callback(uint8_t dev_id,
> > +			       uint16_t qp_id,
> > +			       rte_cryptodev_callback_fn cb_fn,
> > +			       void *cb_arg);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * Remove a user callback function for given crypto device and queue pair.
> > + *
> > + * This function is used to remove dequeue callbacks that were added
> > +to a
> > + * crypto device queue pair using rte_cryptodev_add_deq_callback().
> > + *
> > + *
> > + *
> > + * @param	dev_id		The identifier of the device.
> > + * @param	qp_id		The index of the queue pair on which ops are
> > + *				to be dequeued. The value must be in the
> > + *				range [0, nb_queue_pairs - 1] previously
> > + *				supplied to *rte_cryptodev_configure*.
> > + * @param	cb		Pointer to user supplied callback created via
> > + *				rte_cryptodev_add_deq_callback().
> > + *
> > + * @return
> > + *   - 0: Success. Callback was removed.
> > + *   - -EINVAL:  The dev_id or the qp_id is out of range, or the callback
> > + *               is NULL or not found for the crypto device queue pair.
> > + */
> > +__rte_experimental
> > +int rte_cryptodev_remove_deq_callback(uint8_t dev_id,
> > +				      uint16_t qp_id,
> > +				      struct rte_cryptodev_cb *cb); #endif
> > +
> >  #ifdef __cplusplus
> >  }
> >  #endif
> > diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map
> > b/lib/librte_cryptodev/rte_cryptodev_version.map
> > index 7e4360f..429b03e 100644
> > --- a/lib/librte_cryptodev/rte_cryptodev_version.map
> > +++ b/lib/librte_cryptodev/rte_cryptodev_version.map
> > @@ -101,6 +101,8 @@ EXPERIMENTAL {
> >  	rte_cryptodev_get_qp_status;
> >
> >  	# added in 20.11
> > +	rte_cryptodev_add_deq_callback;
> > +	rte_cryptodev_add_enq_callback;
> >  	rte_cryptodev_configure_raw_dp_ctx;
> >  	rte_cryptodev_get_raw_dp_ctx_size;
> >  	rte_cryptodev_raw_dequeue;
> > @@ -109,4 +111,6 @@ EXPERIMENTAL {
> >  	rte_cryptodev_raw_enqueue;
> >  	rte_cryptodev_raw_enqueue_burst;
> >  	rte_cryptodev_raw_enqueue_done;
> > +	rte_cryptodev_remove_deq_callback;
> > +	rte_cryptodev_remove_enq_callback;
> >  };
> > --
> > 1.9.1