[v3,1/2] rte_flow: add eCPRI key fields to flow API
Checks
Commit Message
Add a new item "rte_flow_item_ecpri" in order to match eCRPI header.
eCPRI is a packet based protocol used in the fronthaul interface of
5G networks. Header format definition could be found in the
specification via the link below:
https://www.gigalight.com/downloads/standards/ecpri-specification.pdf
eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
---
doc/guides/prog_guide/rte_flow.rst | 8 ++
lib/librte_ethdev/rte_flow.c | 1 +
lib/librte_ethdev/rte_flow.h | 31 +++++++
lib/librte_net/Makefile | 1 +
lib/librte_net/meson.build | 3 +-
lib/librte_net/rte_ecpri.h | 163 +++++++++++++++++++++++++++++++++++++
lib/librte_net/rte_ether.h | 1 +
7 files changed, 207 insertions(+), 1 deletion(-)
create mode 100644 lib/librte_net/rte_ecpri.h
Comments
Hi Bing,
> -----Original Message-----
> From: Bing Zhao <bingz@mellanox.com>
> Sent: Thursday, July 2, 2020 3:54 PM
> Subject: [PATCH v3 1/2] rte_flow: add eCPRI key fields to flow API
>
> Add a new item "rte_flow_item_ecpri" in order to match eCRPI header.
>
> eCPRI is a packet based protocol used in the fronthaul interface of
> 5G networks. Header format definition could be found in the
> specification via the link below:
> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.giga
> light.com%2Fdownloads%2Fstandards%2Fecpri-
> specification.pdf&data=02%7C01%7Corika%40mellanox.com%7C504c3c3c
> 131d4707b38e08d81e871030%7Ca652971c7d2e4d9ba6a4d149256f461b%7C0%
> 7C1%7C637292912736066748&sdata=QA%2FjVcj9ImXbuzoeyM3se25eHgL
> RNneA9MM5tHQzAMA%3D&reserved=0
>
> eCPRI message can be over Ethernet layer (.1Q supported also) or over
> UDP layer. Message header formats are the same in these two variants.
>
> Signed-off-by: Bing Zhao <bingz@mellanox.com>
> ---
Acked-by: Ori Kam <orika@mellanox.com>
Thanks,
Ori
@@ -1362,6 +1362,14 @@ Matches a PFCP Header.
- ``seid``: session endpoint identifier.
- Default ``mask`` matches s_field and seid.
+Item: ``ECPRI``
+^^^^^^^^^^^^^
+
+Matches a eCPRI header.
+
+- ``hdr``: eCPRI header definition (``rte_ecpri.h``).
+- Default ``mask`` matches message type of common header only.
+
Actions
~~~~~~~
@@ -95,6 +95,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
MK_FLOW_ITEM(HIGIG2, sizeof(struct rte_flow_item_higig2_hdr)),
MK_FLOW_ITEM(L2TPV3OIP, sizeof(struct rte_flow_item_l2tpv3oip)),
MK_FLOW_ITEM(PFCP, sizeof(struct rte_flow_item_pfcp)),
+ MK_FLOW_ITEM(ECPRI, sizeof(struct rte_flow_item_ecpri)),
};
/** Generate flow_action[] entry. */
@@ -28,6 +28,7 @@
#include <rte_byteorder.h>
#include <rte_esp.h>
#include <rte_higig.h>
+#include <rte_ecpri.h>
#include <rte_mbuf.h>
#include <rte_mbuf_dyn.h>
@@ -527,6 +528,15 @@ enum rte_flow_item_type {
*/
RTE_FLOW_ITEM_TYPE_PFCP,
+ /**
+ * Matches eCPRI Header.
+ *
+ * Configure flow for eCPRI over ETH or UDP packets.
+ *
+ * See struct rte_flow_item_ecpri.
+ */
+ RTE_FLOW_ITEM_TYPE_ECPRI,
+
};
/**
@@ -1547,6 +1557,27 @@ static const struct rte_flow_item_pfcp rte_flow_item_pfcp_mask = {
#endif
/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_ECPRI
+ *
+ * Match eCPRI Header
+ */
+struct rte_flow_item_ecpri {
+ struct rte_ecpri_msg_hdr hdr;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_ECPRI. */
+#ifndef __cplusplus
+static const struct rte_flow_item_ecpri rte_flow_item_ecpri_mask = {
+ .hdr = {
+ .dw0 = 0x0,
+ },
+};
+#endif
+
+/**
* Matching pattern item definition.
*
* A pattern is formed by stacking items starting from the lowest protocol
@@ -20,5 +20,6 @@ SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_sctp.h rte_icmp.h rte_arp.h
SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ether.h rte_gre.h rte_net.h
SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_net_crc.h rte_mpls.h rte_higig.h
SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_gtp.h rte_vxlan.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ecpri.h
include $(RTE_SDK)/mk/rte.lib.mk
@@ -15,7 +15,8 @@ headers = files('rte_ip.h',
'rte_net.h',
'rte_net_crc.h',
'rte_mpls.h',
- 'rte_higig.h')
+ 'rte_higig.h',
+ 'rte_ecpri.h')
sources = files('rte_arp.c', 'rte_ether.c', 'rte_net.c', 'rte_net_crc.c')
deps += ['mbuf']
new file mode 100644
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020 Mellanox Technologies, Ltd
+ */
+
+#ifndef _RTE_ECPRI_H_
+#define _RTE_ECPRI_H_
+
+#include <stdint.h>
+#include <rte_byteorder.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * eCPRI Protocol Revision 1.0, 1.1, 1.2, 2.0: 0001b
+ * Other values are reserved for future
+ */
+#define RTE_ECPRI_REV_UPTO_20 1
+
+/**
+ * eCPRI message types in specifications
+ * IWF* types will only be supported from rev.2
+ */
+#define RTE_ECPRI_MSG_TYPE_IQ_DATA 0
+#define RTE_ECPRI_MSG_TYPE_BIT_SEQ 1
+#define RTE_ECPRI_MSG_TYPE_RTC_CTRL 2
+#define RTE_ECPRI_MSG_TYPE_GEN_DATA 3
+#define RTE_ECPRI_MSG_TYPE_RM_ACC 4
+#define RTE_ECPRI_MSG_TYPE_DLY_MSR 5
+#define RTE_ECPRI_MSG_TYPE_RMT_RST 6
+#define RTE_ECPRI_MSG_TYPE_EVT_IND 7
+#define RTE_ECPRI_MSG_TYPE_IWF_UP 8
+#define RTE_ECPRI_MSG_TYPE_IWF_OPT 9
+#define RTE_ECPRI_MSG_TYPE_IWF_MAP 10
+#define RTE_ECPRI_MSG_TYPE_IWF_DCTRL 11
+
+/**
+ * eCPRI Common Header
+ */
+RTE_STD_C11
+struct rte_ecpri_common_hdr {
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+ uint32_t size:16; /**< Payload Size */
+ uint32_t type:8; /**< Message Type */
+ uint32_t c:1; /**< Concatenation Indicator */
+ uint32_t res:3; /**< Reserved */
+ uint32_t revision:4; /**< Protocol Revision */
+#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ uint32_t revision:4; /**< Protocol Revision */
+ uint32_t res:3; /**< Reserved */
+ uint32_t c:1; /**< Concatenation Indicator */
+ uint32_t type:8; /**< Message Type */
+ uint32_t size:16; /**< Payload Size */
+#endif
+} __rte_packed;
+
+/**
+ * eCPRI Message Header of Type #0: IQ Data
+ */
+struct rte_ecpri_msg_iq_data {
+ rte_be16_t pc_id; /**< Physical channel ID */
+ rte_be16_t seq_id; /**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #1: Bit Sequence
+ */
+struct rte_ecpri_msg_bit_seq {
+ rte_be16_t pc_id; /**< Physical channel ID */
+ rte_be16_t seq_id; /**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #2: Real-Time Control Data
+ */
+struct rte_ecpri_msg_rtc_ctrl {
+ rte_be16_t rtc_id; /**< Real-Time Control Data ID */
+ rte_be16_t seq_id; /**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #3: Generic Data Transfer
+ */
+struct rte_ecpri_msg_gen_data {
+ rte_be32_t pc_id; /**< Physical channel ID */
+ rte_be32_t seq_id; /**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #4: Remote Memory Access
+ */
+RTE_STD_C11
+struct rte_ecpri_msg_rm_access {
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+ uint32_t ele_id:16; /**< Element ID */
+ uint32_t rr:4; /**< Req/Resp */
+ uint32_t rw:4; /**< Read/Write */
+ uint32_t rma_id:8; /**< Remote Memory Access ID */
+#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ uint32_t rma_id:8; /**< Remote Memory Access ID */
+ uint32_t rw:4; /**< Read/Write */
+ uint32_t rr:4; /**< Req/Resp */
+ uint32_t ele_id:16; /**< Element ID */
+#endif
+ rte_be16_t addr_m; /**< 48-bits address (16 MSB) */
+ rte_be32_t addr_l; /**< 48-bits address (32 LSB) */
+ rte_be16_t length; /**< number of bytes */
+} __rte_packed;
+
+/**
+ * eCPRI Message Header of Type #5: One-Way Delay Measurement
+ */
+struct rte_ecpri_msg_delay_measure {
+ uint8_t msr_id; /**< Measurement ID */
+ uint8_t act_type; /**< Action Type */
+};
+
+/**
+ * eCPRI Message Header of Type #6: Remote Reset
+ */
+struct rte_ecpri_msg_remote_reset {
+ uint8_t msr_id; /**< Measurement ID */
+ uint8_t act_type; /**< Action Type */
+};
+
+/**
+ * eCPRI Message Header of Type #7: Event Indication
+ */
+struct rte_ecpri_msg_event_ind {
+ uint8_t evt_id; /**< Event ID */
+ uint8_t evt_type; /**< Event Type */
+ uint8_t seq; /**< Sequence Number */
+ uint8_t number; /**< Number of Faults/Notif */
+};
+
+/**
+ * eCPRI Message Header Format: Common Header + Message Types
+ */
+RTE_STD_C11
+struct rte_ecpri_msg_hdr {
+ union {
+ struct rte_ecpri_common_hdr common;
+ uint32_t dw0;
+ };
+ union {
+ struct rte_ecpri_msg_iq_data type0;
+ struct rte_ecpri_msg_bit_seq type1;
+ struct rte_ecpri_msg_rtc_ctrl type2;
+ struct rte_ecpri_msg_bit_seq type3;
+ struct rte_ecpri_msg_rm_access type4;
+ struct rte_ecpri_msg_delay_measure type5;
+ struct rte_ecpri_msg_remote_reset type6;
+ struct rte_ecpri_msg_event_ind type7;
+ uint32_t dummy[3];
+ };
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ECPRI_H_ */
@@ -304,6 +304,7 @@ struct rte_vlan_hdr {
#define RTE_ETHER_TYPE_LLDP 0x88CC /**< LLDP Protocol. */
#define RTE_ETHER_TYPE_MPLS 0x8847 /**< MPLS ethertype. */
#define RTE_ETHER_TYPE_MPLSM 0x8848 /**< MPLS multicast ethertype. */
+#define RTE_ETHER_TYPE_ECPRI 0xAEFE /**< eCPRI ethertype (.1Q supported). */
/**
* Extract VLAN tag information into mbuf