[V1,1/2] test_plans/vf_pf_reset: add new cases according to testplan
Commit Message
add case to test pf reset trigger vf reset
Signed-off-by: Tang Yaqi <yaqi.tang@intel.com>
Signed-off-by: Hongbo Li <hongbox.li@intel.com>
---
test_plans/vf_pf_reset_test_plan.rst | 40 ++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
@@ -630,3 +630,43 @@ test Case 10: vf reset (two vfs passed through to two VM)
8. Reset vf0 and vf1, send the two packets,
vf0 can forward both of the two type packets to VF1.
+
+test case 11: pf reset trigger vf reset
+=======================================
+
+1. Execute step1-step6 of test case 1.
+
+2. Reset PF::
+
+ echo 1 > /sys/bus/pci/devices/0000:81:00.0/reset
+
+3. Testpmd shows::
+
+ Port 0: reset event
+ Port 1: reset event
+
+4. Reset the vfs::
+
+ testpmd> stop
+ testpmd> port stop all
+ testpmd> port reset all
+ testpmd> port start all
+ testpmd> start
+
+ Send the same 1000 packets with scapy from tester, verify the packets can be
+ received by one VF and can be forward to another VF correctly,
+ check the port info::
+
+ testpmd> show port info all
+
+ ********************* Infos for port 0 *********************
+ MAC address: 00:11:22:33:44:11
+ Promiscuous mode: disabled
+ Allmulticast mode: enabled
+
+ ********************* Infos for port 1 *********************
+ MAC address: 00:11:22:33:44:12
+ Promiscuous mode: disabled
+ Allmulticast mode: enabled
+
+ The info status is consistent to the status before reset.